Replacement Blades. for Primary Belt Cleaners. Clean Better Last Longer CO$T LE$$ Martin. Argonics ASGCO Flexco ARCH. Superior American Eagle BENETECH

Transcription

1 Martin Replacement s for Primary Cleaners s for all models and manufacturers including: Argonics ASGCO Flexco ARCH Superior American Eagle BENETECH

2 Martin Replacement s for Primary Cleaners Martin High-Performance Urethane Urethane Color Part Number Suffix Durometer Application Conditions Temperature Range Standard Orange 85 High Temperature Chemical Resistant Low Rigidity Green GR 95 Brown BR 90 Tan CL 86 Suitable for most applications, including abrasive conditions and exposure to solvents or oil. For use with materials such as coal, ore, bauxite, coke, refuse. Suitable for 80% or more of all applications. For use with high temperature materials such as clinker. Improved resistance to chemicals and reduces water absorption for high moisture environments such as limestone. Best choice for applications exposed to chemicals with ph as high as 11 and as low as 4. For use with dry products such as sand and gravel. w -20 to 160 F (-30 to 70 C) Continuous -40 to 300 F (-40 to 150 C) Intermittent 350 F (177 C) -40 to 160 F (-40 to 70 C) -20 to 160 F (-30 to 70 C) Low Adhesion Navy Blue NB 90 For use with sticky or tacky products such as cement, glass, and wood chips. -20 to 160 F (-30 to 70 C) Martin Urethane Benefits: Manufactured in house for highest quality assurance Specially-formulated, color-coded urethane to suit any application Up to 54% more urethane in the wearable area than competitive blades High-performance urethane ensures product satisfaction Backed by our Absolutely, No Excuses Guarantee

3 Design BLADE PROFILE Wear volume and attack angle contribute much more to blade life and cleaning performance than blade height. A CONSTANT ANGLE/AREA RADIAL PRESSURE (CARP) CLEANING (A) To ensure consistent cleaning throughout all stages of blade life, our patented Constant Angle Radial Pressure ( CARP ) technology incorporates a specially-designed curved blade. This constant angle design maintains efficiency throughout the service life of the blade. B (B) To prevent a reduction in blade-to-belt pressure, cleaner efficiency, and the constant need for retensioning, we combined our Constant Area Radial Pressure design ( CARP ) with our tensioner technology to minimize the change in area throughout a blade s wear life. Material Path For optimal cleaning and blade life, the blade width should be sized as close to the material path as possible. INCORRECT CORRECT

4 Martin Replacement s for Primary Cleaners Argonics Eraser Description Argonics Raptor for Eraser CP-RE-XX-G XX Volume 5.6 in in 3 Volume 16% Argonics Raptor CP-RE-12-G CP-RE-18-G CP-RE-24-G CP-RE-30-G CP-RE-36-G CP-RE-42-G CP-RE-48-G CP-RE-54-G CP-RE-60-G CP-RE-66-G CP-RE-72-G CP-RE-78-G CP-RE-84-G CP-RE-90-G Argonics, Eraser, and Raptor are trademarks of Argonics Inc., Marquette, MI.

5 ASGCO Skalper Description ASGCO Skalper for ASGCO Skalper ASG-SK4-XXA XX Volume 3.25 in in 3 Volume 53% ASGCO Skalper ASG-SK4-12A ASG-SK4-18A ASG-SK4-24A ASG-SK4-30A ASG-SK4-36A ASG-SK4-42A ASG-SK4-48A ASG-SK4-54A ASG-SK4-60A ASG-SK4-66A ASG-SK4-72A ASG-SK4-78A ASG-SK4-84A ASG-SK4-90A ASGCO and Skalper are registered trademarks of ASGCO Mfg,Inc., Allentown,PA.

6 Martin Replacement s for Primary Cleaners Flexco EZP1 Rockline Description Flexco Conshear for Flexco EZP1 Rockline CRBXX XX11OR Volume 6.23 in in 3 Volume 7% BLADE ORDERING INFORMATION Flexco ConShear CRB OR CRB OR CRB OR CRB OR CRB OR CRB OR CRB OR CRB OR CRB OR CRB OR CRB OR* Flexco and Rockline are registered trademarks of Flexible Steel Lacing Company, Downers Grove, IL. ConShear is a trademark of Flexible Steel Lacing Company, Downers Grove, IL.

7 Flexco MMP Description Flexco Tuffshear for Flexco MMP TRBXX XX11 Volume Volume 11.8 in in 3 Equal Equal BLADE ORDERING INFORMATION Flexco TuffShear TRB TRB TRB TRB TRB TRB TRB TRB TRB TRB TRB TRB TRB Flexco is a registered trademark of Flexible Steel Lacing Company, Downers Grove, IL. TuffShear is a trademark of Flexible Steel Lacing Company, Downers Grove, IL

8 Martin Replacement s for Primary Cleaners ARCH Saber (SB) Description ARCH Saber (SB) for ARCH Saber (SB) SB-016-XX XX11 Volume 3.06 in in 3 Volume 35% BLADE ORDERING INFORMATION ARCH Saber (SB) SB SB SB SB SB SB SB SB SB SB SB SB Saber is a registered trademark of Arch Environmental Equipment Inc., Paducah, KY.

9 ARCH Saber (SCM) Description ARCH Saber (SCM) for Arch Saber (SCM) SCM-XX XX11 Volume 3.06 in in 3 Volume 35% BLADE ORDERING INFORMATION ARCH Saber (SCM) SCM SCM SCM SCM SCM SCM SCM SCM SCM SCM SCM SCM Saber is a registered trademark of Arch Environmental Equipment Inc., Paducah, KY.

10 Martin Replacement s for Primary Cleaners SUPERIOR Exterra Description Superior Exterra Martin Retorfit for Superior Exterra XX STXX11XX Volume 5.0 in in 3 Volume 30% BLADE ORDERING INFORMATION Exterra ST ST ST ST ST ST ST ST ST ST : Exterra is a registered trademark of Superior Industries Inc., Morris, MN.

11 BENETECH BEP1 Description BENETECH AdvantEdge for BENETECH BEP1 BAPR1-0XX-0XX-1U XX11XXOR Volume 5.6 in in 3 Volume 16% BLADE ORDERING INFORMATION BENETECH AdvantEdge BAPR U OR BAPR U OR BAPR U OR BAPR U OR BAPR U OR BAPR U OR BAPR U OR BAPR U OR BAPR U OR BAPR U OR BENETECH and AdvantEdge are registered trademarks of Benetech Inc., Aurora, IL.

12 Martin Replacement s for Primary Cleaners American Eagle E4 Series Description American Eagle E4 for American Eagle E4 E4MXX XX11XXOR Volume Volume 8.1 in in 3 24% * * s without CARP angle produce more surface area against the belt as they wear. This requires continually increasing pressure to maintain cleaning effectiveness and shortens blade wear life. See CARP angle information on Page BLADE ORDERING INFORMATION American Eagle E E4M OR E4M OR E4M OR E4M OR E4M OR E4M OR E4M OR E4M OR E4M OR American Eagle is a registered trademark of American Eagle Manufacturing, LLC., New Bern, NC We guarantee that our blades will fit and clean better,

13 American Eagle E5 Series Description American Eagle E5 for American Eagle E5 E5MXX XX11XXOR Volume Volume 5.3 in in 3 28% * * s without CARP angle produce more surface area against the belt as they wear. This requires continually increasing pressure to maintain cleaning effectiveness and shortens blade wear life. See CARP angle information on Page 3. BLADE ORDERING INFORMATION American Eagle E E5M OR E5M OR E5M OR E5M OR E5M OR E5M OR E5M OR E5M OR E5M OR American Eagle is a registered trademark of American Eagle Manufacturing, LLC., New Bern, NC

14 Martin Replacement s for Primary Cleaners SPECIFYING YOUR MARTIN RETROFIT BLADE Retrofit Part Number P/N PREFIX XX 1 1 XX XX (inches) (inches) Urethane Color P/N PREFIX 35794: Argonics Eraser 36471: ASGCO Skalper 38108: Flexco EZP1 Rockline 38900: Flexco MMP 34500: ARCH Saber (SB) 35885:ARCH Saber (SCM) 39291: Superior Exterra 39427: American Eagle E : American Eagle E :BENETECH URETHANE COLOR Ø or OR: Orange GR: Green BR: Brown CL: Tan NB: Navy Blue We We guarantee that our our blades will will fit fit and will clean clean better, last last longer, and and cost cost less less than than competitive blades.

15 PRECLEANER BLADE TROUBLESHOOTING GUIDE Problem Cause Solution Uneven Wear - blade worn more in center than at ends Incorrect blade length Select blade width based on material path. Rapid Wear Flipping Through Chattering or Skipping on Urethane Melting Incorrect cleaner and/or blade Incorrect tension Incorrect mounting Incorrect cleaner and/or blade Incorrect mounting Incorrect tension (too low) is dry is dry, friction causes heat to build up in blade Material being conveyed is exceeding temperature range of urethane Select proper belt cleaner and blade based on belt width, belt speed, and head pulley diameter. Adjust tensioner according to applicable belt cleaner and/or tensioner operator s manual. Verify correct mounting location according to applicable belt cleaner operator s manual. Select proper belt cleaner and blade based on belt width, belt speed, and head pulley diameter to ensure blade angle of attack is correct. Verify correct mounting location according to applicable belt cleaner operator s manual. Adjust tensioner according to applicable belt cleaner and/or tensioner operator s manual. Select proper urethane for dry material, such as Martin Clear (CL) urethane. Select proper urethane for dry material, such as Martin Clear (CL) urethane. Select proper urethane for high temperature material, such as Martin High-Temp (GR) urethane.

16 ABF ABF ABF ABF ABF ABF ABF Martin ½ 5½ 1¼ 1¾ 1¼ 1¾ FKOGPUKQPU!)kpej* Replacement s Oqfgn for Primary Cleaners Dqnv!Rcvvgtp C D E D C.9 25/861 9/;49 ;/424 D4.;11.3C.9 Dqnv!Uk g G H 6! 8 ' 27/924 9/;49 ;/424 PERFORMANCE DATA6! 8 ' D ;/486 21/861 9 D /486 In. Lbs. 24/486Model 24/236 D4.3; /486 24/486ABF-10 24/ D UNITED STATES 32/; /486ABF-13 24/236 GERMANY 35/111 25/924 26/424 INDONESIA ABF Global Units D BRAZIL UpD4.8; to CHINA 53%D MORE 39/424 39/424 ENGLAND BLADE VOLUME FRANCE ABF-19 M 7Starting Pressure (PSI) 9 Horz. Vert ; ; 41 5 ; /924ABF-35 26/ MEXICO /924ABF-41 26/424 ABF PSI SOUTH AFRICA TURKEY Oqfgn Kp/!Ndu/ TRO Hqteg!Ndu/ D C.9 37/ D4.;11.3C.9 54/;1 ;11 D / D /;1 D4.3; /41 D /91 D /31 D4.8; /;1 D / CFM AUSTRALIA CHILE INDIA 60 PSI 80 PSI VPM Force Lbs ;; CFM VPM Force Lbs Coru 341!Xqnv 571!Xqnv 686!Xqnv 4/9 2/; 2/61 JR Retrofit for 4/3 2/7 blades 4/3 2/7 belt cleaners competitive À ARGONICS Eraser... pg /9 4/; 2 ASGCO Skalper... pg. 5 3;11 8/9 4/; Rockline 2 Flexco EZP1 & MMP... pg. 6 7 ARCH (SCM) ENGINEERING... pg Martin Engineering 9/1 USASaber 5/1 (SB) MARTIN 3 USA pg. 10 Place 6391 One Martin SUPERIOR 28/9 9/; Exterra... 4 One Martin Place Neponset, ILBENETECH USA BEP1...pg. 11 8;11 28/9 9/; Neponset, IL USA or American Eagle E4 & E5... pg info@martin-eng.com Page 1 of 6 ÝÑËÙßÎ 21111Fax /1 ;/1 6 For Richwood models please contact Ê ÞÎßÌ ÑÒ ÍÑÔËÌ ÑÒÍ your Martin Representative. Octvkp!Gpikpggtkpi!WUC Qpg!Octvkp!Rnceg Pgrqpugv-!KN!72456.;877!WUC 911!655!3;58!qt!41;!963!3495 Hcz!911!925!2664 yyy/octvkp.gpi/eqo Martin Engineering USA martin-eng.com Form No. L /11 Form No. L /12 MARTIN ENGINEERING USA Martin Engineering MartinCompany Engineering 1944, Company Place One Martin Neponset, IL USA Form No. L-RC-EN or info@martin-eng.com $)-%"* ;58!qt!41; ! September, 2015 njoy a quick break and sh up on valuable (and some using) info from your material Patents and patents pending Registered trademark of Martin Engineering Company handling authority. CFM Authorized Representatives in over 32 additional countries JAPAN RGTHQTOCPEG!FCVC We guarantee that our blades will fit and will 84 clean better, last longer, and cost less than competitive blades. 27; 23 2 CANADA Ygkijv! ndu À VPM Force Lbs. Licensees ¼ ¼ ¼ ½ ½ F 22/ Form No. L /16 Hqto!Pq/!N Hqto!Pq/!N Martin Engineering Company 2016 «!Octvkp!Gpikpggtkpi!Eqorcp{!2;55-!3122 «!Octvkp!Gpikpggtkpi!Eqorcp{!3123-!3125