Equipment Guide Construction, power and lighting

Transcription

1 Equipment Guide TH Construction, power and lighting ANNIVERSARY SINCE 973

2 Compaction Equipment Rammers...4 Plate Compactors...5 Rollers: Walk-Behind Single and Tandem Drum...6 Rollers: Trench...7 Rollers: Ride-On Tandem Drum...8 Generators and Welders Mobile Generators: Portable to 9.7kW...9 Generators: Mobile 7kW to 50kVA Welders...2 Trailers Heavy Duty Trailers...3 Lighting Solutions GloBug Balloon Lights and GloBug 4-Spot Light Towers...4 Towable Light Towers Dewatering Equipment Pumps: Submersible...7 Pumps: Centrifugal...8 Pumps: Trash Pumps: Diaphragm...2 Water Trailers...22 Concrete-Masonry Technologies Equipment Pumps: Concrete-Masonry...23 Mixers: Concrete Towable...24 Mixers: Plaster/Mortar Towable/Mudtub Rebar Benders & Cutters...28 Power Buggies...29 Concrete Vibrators: Flex-Shaft...30 Concrete Vibrators: Micon High-Cycle...3 Concrete Vibrators: High-Cycle...32 Screeds: SuperScreed, DuoScreed...33 Screeds: Vibratory Truss...34 Trowels: Walk-Behind Standard...35 Trowels: Walk-Behind Heavy-Duty and Epoxy...36 Trowels: Ride-On Mechanical and Hydrostatic...37 Diamond Blades, Saws: Masonry...38 Saws: Tile, Pavement Core Drill Machines...4 Ordering Information NOTE: Specifications valid at time of printing and may change due to continuous product development. Not responsible for typographical errors. The standard in high-quality equipment solutions. In business for four decades, Multiquip is one of the largest, most diversified manufacturers and suppliers of world class quality products and solutions for the construction, industrial, telecom, government, non-commercial, aerospace, entertainment, and oil and gas exploration markets. Multiquip s comprehensive product portfolio encompasses light to medium construction equipment, power generators and lighting. Servicing customers worldwide, Multiquip distributes its products in more than 70 countries through thousands of authorized distribution partners.

3 RAMMERS MIKASA RAMMERS Four cycle engines available from Honda and Subaru Optional shoe sizes and extensions available Cyclone air filtration system on MTX series Cam-type clutch Grease- and oil-bath-lubricated models IMPACT FORCE LBS (KN) BLOWS MIN MAX. MAKE (KW) SHOE SIZE WIDTH IN (MM) OPER. MTR40SF,25 (5.4) 695 SUBARU EH (.8) 5.9 (50) 0 (46) MTX60HD 3,064 (3.6) 695 HONDA GX (2.) 0.4 (265) 4 (64) MTX60SD 3,064 (3.6) 695 SUBARU ER2 3.5 (2.6) 0.4 (265) 4 (64) MTX70HD 3,350 (4.9) 690 HONDA GX (2.).2 (285) 65 (75) MTX70SD 3,350 (4.9) 690 SUBARU ER2 3.5 (2.6).2 (285) 65 (75) MIKASA FORWARD PLATE COMPACTORS Removable water tank on select models Low-vibration handles on selected models Centrifugal clutch with cogged belt design Open base plate design Easy to access exciter CENTRIFUGAL FORCE LBS (KN) EXCITER SPEED VPM SPEED MIN FT (M) (KW) PLATE WIDTH IN (MM) OPER. MVC64VH 2,275 (0.) 5, (25) HONDA GX (2.6) 3.8 (350) 5 (68) MVC64VHW 2,275 (0.) 5, (25) HONDA GX (2.6) 3.8 (350) 57 (7) MVC82VH 3,080 (3.7) 5, (22) HONDA GX (3.6) 7.7 (450) 75 (79) MVC82VHW 3,080 (3.7) 5, (22) HONDA GX (3.6) 7.7 (450) 8 (82) MVC88VGH* 3,372 (5) 6, (22) HONDA GX (3.6) 9.7 (500) 22 (96) MVC88VGHW* 3,372 (5) 6, (22) HONDA GX (3.6) 9.7 (500) 28 (99) MVC90H 3,47 (5.2) 5, (25) HONDA GX (3.6) 9.7 (500) 94 (88) *Wheel kit optional. PLATE COMPACTORS MTX80SD 3,505 (5.6) 678 SUBARU ER2 3.5 (2.6).2 (285) 8 (82) MTX SERIES RAMMERS 4 Cycle Engines Honda and Subaru offerings to meet operator preferences. MTX-series rammers feature an anti-vibration handle that significantly reduces operator fatigue. All new throttle design enables contractor to control engine speed ed and fuel delivery with a single lever. Combination tachometer and engine hour meter provides engine RPM and helps track service intervals. MIKASA REVERSIBLE PLATE COMPACTORS High-horsepower gasoline and diesel engines Selected models include extension plates as standard Hydraulic forward and reverse Compas Compaction Analyzing System available on MVH306 and MVH406 series models Heavy-duty vibrator bearings CENTRIFUGAL FORCE LBS (KN) EXCITER SPEED VPM SPEED MIN FT (MM) (KW) PLATE WIDTH OPER. MVH20VGH 5,058 (22.5) 6, (23) HONDA GX (3.6) 5.8 (400) 256 (6) MVH50VGH 6,070 (27) 5, (25) HONDA GX (4.) 6.9 (430) 33 (50) MVH206GH 7,868 (35) 5, (23) HONDA GX (5.3) 20 (50) 459 (208) MVH206D 7,868 (35) 5, (23) YANMAR L70V 6.4 (4.8) 20 (50) 459 (208) MVH306GH 0,6 (45) 3, (23) HONDA GX270 8 (6) 24 (60)* 706 (320) MVH306DS2 0,6 (45) 3, (23) YANMAR L70V 6.43 (4.8) 24 (60)* 725 (328) MVH406GH 2,365 (55) 4, (23) HONDA GX390 (8.2) 28 (700)* 868 (395) MVH406DSZ 2,365 (55) 4, (23) HATZ B40 0 (7.4) 28 (700)* 937 (425) MVH502DSB2 3,87 (6.7) 4, (23) Hatz D8S 4.3 (0.6) 28 (700)*,22 (50) COMPAS PLATES MVH306DSCPAS 0,6 (45) 3, (23) YANMAR L70V 6.43 (4.8) 24 (60)* 725 (328) MVH406DSCPAS 2,365 (55) 4, (23) HATZ B40 0 (7.4) 28 (700)* 937 (425) *Plate width includes 6" extensions. Electric start models do not include battery. 4 COMPACTION EQUIPMENT COMPACTION EQUIPMENT multiquip.com 5

4 WALK-BEHIND ROLLERS WALK-BEHIND SINGLE-DRUM ROLLERS Hydrostatic drive with gas- or dieselengine options Adjustable transport hooks Twin scraper blades with cocomats Stabilizing rollers 30 steel drum with beveled edges CENTRIFUGAL FORCE LBS (KN) V304EH 3,730 (6.6) V304EY 3,730 (6.6) VPM DRUM WIDTH IN (MM) 4, (762) 4, (762) MIKASA WALK-BEHIND ROLLERS Water tank and spray bars Gasoline and diesel engines Hydrostatic drive Narrow profile External vibrator Front bumper and work light CENTRIFUGAL FORCE LBS (KN) MRH800GS 2,404 (0.7) MRH800DS2 2,404 (0.7) VPM (HZ) 3,300 (55.3) 3,300 (55.3) Electric start models do not include battery. HONDA GX340 YANMAR L00ADDE DRUM WIDTH IN (MM) 25.6 (650) 25.6 (650) HONDA GX390 YANMAR L00V (KW) 0.7 (7.9) 0 (7.46) (KW).7 (8.7) 0 (7.5) START METHOD ELECTRIC/ RECOIL ELECTRIC/ RECOIL START METHOD ELECTRIC/ RECOIL ELECTRIC/ RECOIL OPER.,045 (474),065 (483) OPER.,530 (694),562 (709) RAMMAX TRENCH ROLLERS Skid steer drive with 24 and 33 drum width options Solar and cable remote controls Five year warranty on hydrostatic drive, motor assembly and eccentric bearings Two year warranty on all remaining components see warranty sheet for full details CENTRIFUGAL FORCE LBS (KN) RW 55MI 9,333 (86) VPM (HZ) ROLLER DRUM WIDTH IN (MM),800 (30) VPM (HZ) DRUM WIDTH OPTIONS IN (MM) 33/24 (838/60) HATZ 2G40 (KW) 8.5 (3.8) RAMMAX ARTICULATING TRENCH ROLLERS Articulating roller available in 25" or 33" working widths Durable articulation joint requires no greasing Oscillating joint keeps drum rolls in contact with soil for optimum compaction Yanmar engine delivers reliable starting and performance Infrared remote charges using solar power and automatically synchronizes with the roller Front and rear covers provide easy access to all maintenance points RX575CI25 25 (640) RX575CI33 33 (850) 2,340 (39) 2,340 (39) YANMAR 3TNV76/ EPA 4 YANMAR 3TNV76/ EPA 4 (KW) 20.4 (5) 20.4 (5) OPER. 3,75/3,263 (,440/,480) OPER. 3,97 (,450) 3,307 (,500) TRENCH ROLLERS 6 COMPACTION EQUIPMENT COMPACTION EQUIPMENT multiquip.com 7

5 RIDE-ON ROLLERS RIDE-ON TANDEM DRUM ROLLERS AR3 Hydrostatic drive Articulated steering Gasoline- and diesel-engine options with electric start 40-gallon water tank Maintenance free articulation joint and vibratory assembly R2000H roller uses static force to delivers economy and value CENTRIFUGAL FORCE LBS (KN) VPM (HZ) DRUM WIDTH IN (MM) SPEED MPH (KPH) (KW) OPER. LBS (KG) AR3HAR 300 (3.8) 4,000 (67) 35.7 (90) (0-7.7) HONDA GX (4.9) 3,73 (,439) AR3DR 300 (3.8) 4,000 (67) 35.7 (90) (0-7.7) VANGUARD DM850D R2000H STATIC N/A 28 (7) FRONT; 32 (83) REAR 23.6 (7.6) 3,227 (,463) (0-9) HONDA GX (5.3) 2,235 (,04) MQ POWER PORTABLE GENERATORS Sizes ranging from 2,500 to 9,700 watts Two-year warranty Voltage regulation maintained within ± 3% Brushless design minimizes maintenance Idle control on GA 36, GA 6 and GA 97 models Optional wheel kits available (UWKB) All receptacles GFCI protected WATTS MAX/CONT VOLTAGE AMPERAGE MAX/CONT GA25H 2,500/2,200 20V 20.8/8.3@20V HONDA GX60 GA36HB 3,600/3,200 20V/240V 30/26.6@20V HONDA 5/3.3@240V GX240 GA6HB 6,000/5,000 20V/240V 50/4.6@20V HONDA 25/20.8@240V GX340 GA6HEB* 6,000/5,000 20V/240V 50/4.6@20V HONDA 25/20.8@240V GX340 GA97HEA 9,700/8,400 20V/240V 80.8/70@20V HONDA 40.4/35@240V GX60 DA7000SSA 7,000/6,000 20V/240V 58.3/50@20V KUBOTA 29.2/25@240V Z482 Wheel kit sold separately. (KW) STARTER TYPE DRY 4.8(3.6) RECOIL 0 (50) 7.9(5.9) RECOIL 70 (77) 0.7(8.0) RECOIL 94 (88) 0.7(8.0) ELECTRIC/ 26 RECOIL (98) 6.6(2.4) ELECTRIC/ 337 RECOIL (53) 2.5(9.3) ELECTRIC 527 (239) * Optional battery available PORTABLE GENERATORS CANADIAN SPECIFICATIONS WATTS MAX/CONT VOLTAGE AMPERAGE MAX/CONT GAC22H 2,200/,800 20V 8/5@20V HONDA GX60 GAC36HZA 3,600/3,200 20V/240V 30/26.6@20V HONDA 5/3.3@240V GX240 GAC6HZRA 6,000/5,000 20V/240V 50/4.6@20V HONDA 25/20.8@240V GX340 GAC6HZA* 6,000/5,000 20V/240V 50/4.6@20V HONDA 25/20.8@240V GX340 GAC97HZA 9,700/8,400 20V/240V 80.8/70@20V HONDA 40.4/35@240V GX60 DAC7000SSA 7,000/6,000 20V/240V 58.3/50@20V KUBOTA 29.2/25@240V Z482 * Optional battery available (KW) STARTER TYPE DRY 4.8(3.6) RECOIL 07 (49) 7.9(5.9) RECOIL 64 (74) 0.7(8.0) RECOIL 87 (85) 0.7(8.0) ELECTRIC/ 203 RECOIL (92) 6.6(2.4) ELECTRIC/ 326 RECOIL (48) 2.5(9.3) ELECTRIC 529 (240) See page 32 for high-cycle generators for FXA vibrators 8 COMPACTION EQUIPMENT GENERATORS/WELDERS multiquip.com 9

6 MOBILE GENERATORS MQ POWER WHISPERWATT Ideal for portable, standby and special events Highway-legal trailers and auxiliary fuel tanks available Patented Open-Delta generator offers best in class motor starting Excellent voltage and frequency regulation Designed for low-noise operation - surpasses OSHA standards Full engine and generator instrumentation Tier 4 engines on select models 7-56 kva Single Phase kva Single/Three Phase DA ** 7000SSA * 0SPX TLG ** 2SPX 5SPX 20SPX 25SSI 36SPX DCA 40SSK 45SSI 45SSK DCA 56SPX 70SSJU4I DCA 85SSJ 25SSJU4I 50SSC * TIER 4i ** TIER 4f 80SSC 220SSC 300SSC 400SSI4i DCA 600SSV DCA 800SSK STANDBY KW (KVA) 7 (7) () 3 (3) 6.5 (6.5) 22 (22) 22 (27.5) 40 (40) 3 (39) 40 (50) 40 (50) 62 (62) 62 (77) 75 (94) 0 (37) 32 (65) STANDBY KW (KVA) 58 (98) 94 (242) 264 (330) 352 (440) 528 (660) 704 (880) PRIME KW (KVA) 6 (6) 0 (0) 2 (2) 5 (5) 20 (20) 20 (25) 36 (36) 30 (37) 36 (45) 36 (45) 56 (56) 56 (70) 68 (85) 00 (25) 20 (50) PRIME KW (KVA) 44 (80) 76 (220) 240 (300) 320 (400) 480 (600) 640 (800) -PHASE 20V 29.2 (2 SETS) 4.7 (2 SETS) 50A (2 SETS) 62.5A (2 SETS) 83A (2 SETS) 55.6A 50A (2 SETS) 82A 00A 00A 233A (2 SETS) 55.4A 88.9A 277.8A 333.3A -PHASE 20V 400A 489A 666.7A 888.9A 888.9A 777.8A -PHASE 240V 3-PHASE 240V 3-PHASE 480V WET (257) 4.7A,250 (567) 50A 964 (437) 62.5A,44 (642) 83A,563 (709) 27.8A 60A 30A,54 (699) 50A 2,557 (,60) 4A 89A 44A 2,282 (,035) 50A 08A 54A 2,464 (,7) 50A 2,35 08A 54A (,050) 233A 3,48 (,550) 77.8A 68A 84A 4,40 (2,000) 94.9A 204A 02A 4,07 (,863) A 50A 6,460 (2,930) 66.7A 36A 80A 7,67 (3,250) kva Single/Three Phase * TIER 4i -PHASE 240V 200A 244.4A 333.3A 444.4A 444.4A 888.9A 3-PHASE 240V 3-PHASE 480V WET 433A 26A 7,23 (3,280) Optional trailer TRAILER TRLR0W, TRLRMP(XF) TRLRMP(XF) TRLRMP(XF) TRLRMP(XF) TRLR50(XF) TRLR50(XF) TRLR70(XF), TRLR75(XF) TRLR70(XF), TRLR75(XF) TRLR70(XF), TRLR75(XF) TRLR70(XF) TRLR75(XF) TRLR75(XF) TRLR700S TRLR75(XF) TRLR50US TRLR80(XF) TRAILER TRLR80(XF) 529A 264.5A 7,496 (3,400) TRLR220(XF) A 9,766 TRLR325(XF) (4,440) 962.3A 48.A 2,852 TRLR400(XF) (5,830),443.4A 72.7A 7,662 TRLR800 (8,00),924.6A 962.3A 25,308 TRLR800 (,479) MQ POWER ULTRA SILENT Ultra-silent design for critical low noise applications Ideal for standby, municipal, mobile telecom and studio entertainment Integrated fuel tank provides for 24-hour operation at full load Environmental skid design allows for full fluid containment with float switch and alarm light Excellent voltage and frequency regulation Single axle and tandem axle highway-legal trailers available STANDBY KW (KVA) 22 25USI (27) 45USI * TIER 4i 40 (50) PRIME KW (KVA) 20 (25) 36 (45) -PHASE 20V PHASE 240V PHASE 240V 3-PHASE 480V MQ POWER CONTAINER GENERATORS Specially-designed container 4 full containment Ideal for portable and standby Cummins heavy-duty diesel engine Power command digital genset control CG * 500C2 CG * 000C2 * TIER 2 STANDBY KW (KVA) 500 (625) 000 (250) PRIME KW (KVA) 455 (569) 900 (25) 3-PHASE 20,208 STANDBY/ PRIME 3-PHASE 277,980 STANDBY/ PRIME WET TRAILER ,32 (967) TRLR25US ,499 TRLR45US2 (587) 3-PHASE 480 STANDBY/ PRIME FUEL TANK CAPACITY GAL. Optional trailer WET 737/ / ,440 (9,27) 504/ ,0 (20,008) MOBILE GENERATORS 0 GENERATORS/WELDERS GENERATORS/WELDERS multiquip.com

7 WELDERS MQ POWER POWERED WELDERS The industry s most versatile line of welder / generators Simultaneous use of DC Welding and AC power output on selected models Optional trailer CC/CV welding output on 225 Amp and larger models Dual welding capability on DLW330X2 and DLW400ESA for maximum productivity Selected models feature E-mode to reduce fuel consumption and noise levels Optional remote available on selected models AC receptacles GFCI protected DC DC CURRENT VOLTAGE DUTY CYCLE GASOLINE GAW35H 35A 25.2V 40%@35A 00%@80A GAW80HE 80A 26.8V 50%@80A 00%@0A DIESEL SDW225SSA ** 225A 5-28C 28CC CURRENT RANGE POWER ; 40-35A.5KW; 5 HONDA GX A 3KW; HONDA 25 GX340 00%@200A A 6KW; 50/25 DLW300ESA ** 300A 3CC 00%@280A A 9.6KW; 80/40 DLW330X2 ** DLW400ESA * 340A Single 200A Double 400A Single 200A Double 3 00%@280A 2x26.6CC 2x x27CC DAW500SA * 500A 6-40CV 38CC * TIER 4i ** TIER 4f 00%@350A 2x75 KUBOTA Z482 KUBOTA D A 0.5KW; KUBOTA 2x35-200A 87/44 D A 2x35-200A 00%@350A A BATTERY-POWERED WELDER One-of-a-kind rechargeable DC battery welder Quiet with no exhaust fumes Lightweight and compact just 29 lbs. Digital display panel 4KW; KUBOTA 6/58 V305 3KW; 25 KUBOTA D803 4 (52) 236 (07) 675 (306) 849 (385) 893 (405),092 (495),072 (486) DC CURRENT DC VOLTAGE DUTY CYCLE CURRENT RANGE BDW80MC 70A %@20A 30-80A 29 (59) LxWxH IN(CM) 22x9x2 (55x48x53) 28x24x22 (70x60x56) 45x26x32 (4x66x8) 5x27x33 (30x69x84) 5x27x33 (30x69x84) TRAILER/ WHEEL KIT UWKB UWKB WKT225A, TRLR0W, TRLRMP(XF) TRLR0W TRLRMP(XF) TRLR0W TRLRMP(XF) 6x29x35 TRLRMP(XF) (55x74x89) 53x32x36 TRLRMP(XF) (35x8x9) Optional battery available LxWxH IN(CM) 2x2x8 (52x30x45) MQ POWER HEAVY DUTY TRAILERS Heavy duty welded steel frame contruction Powder coat paint process including frame, channel, actuator and fenders D.O.T. approved tail lamps, stop lamps, turn signal lamps and side marker lamps Surge hydraulic or electric-actuated drum brakes (all axles) GROSS VEHICLE RATING LBS. GROSS AXLE RATING LBS. TIRE SIZE TIRE LOAD RATING LBS. LXWXH (IN) FUEL TANK CAPACITY GAL. DRY (WET) LBS. TRLR0W EA ST75/80D 360 EA. 9.5x52x (-) 3 LR-C TRLRMP EA ST75/80D 360 EA. 98.6x55.5x (-) 3 LR-C TRLRMPXF EA ST75/80D 360 EA. 98.6x55.5x (73) 3 LR-C TRLR25US EA. ST75/80D 360 EA. 04.5x56x2 406 (-) 3 LR-C TRLR45US EA. ST205/75D 760 EA. 42.4x65x (-) 4 LR-C TRLR EA. ST75/80D 360 EA. 28x55x (-) 3 LR-C TRLR50XF EA. ST75/80D 360 EA. 28x55x (80) 3 LR-C TRLR EA. ST205/75D 760 EA. 45.9x68x (-) 4 LR-C TRLR70US EA. ST205/75D 820 EA. 64.4x72.5x (-) 5 LR-C TRLR70XF EA. ST205/75D 760 EA. 45.9x68x (34) 4 LR-C TRLR75XF EA. ST205/75D 820 EA. 42.5x69.5x (586) 5 LR-C TRLR85US EA. ST225/75D 2540 EA. 77x79.5x (-) 5 LR-D TRLR85XF EA. ST225/75D 2540 EA. 8x72.5x (303) 5 LR-D TRLR25XF EA. ST225/75D 2540 EA. 8x72.5x (3278) 5 LR-D TRLR50US EA. ST235/80R 3500 EA. 84x83x (-) 6 LR-E TRLR80XF EA. ST235/80R 3500 EA. 204x86.5x (49) 6 LR-E TRLR220XF EA. ST235/80R 3500 EA. 209x87.4x (5520) 6 LR-E TRLR325XF ST235/75R 6005 EA. 234x96x (5990) EA. 7.5 LR-H TRLR400XF EA. ST235/ 3500 EA. 264x94x (943) 80R6 LR-E TRLR EA. 235/75R 7.5 LR-J 5675 (DUAL) 44x02x (3538*) *250 sub base tank TRAILERS 2 GENERATORS/WELDERS TRAILERS multiquip.com 3

8 GLOBUG LIGHTING GLOBUG BALLOON LIGHTS Runs on 20/240 volt power Easy maneuverability and transport 360-degree illumination Glare-free lighting Decorative balloons available for advertising and promotion Electronic ballast for easy starting Optional generator LIGHT TOWERS Mobile lighting and power solutions Heavy strength trailers for safety Four metal halide lamps 440,000 Lumens output performance Rugged mast design with 360 rotation Withstands 65 MPH winds Masts extend 30 Multiple electrical receptacle packages EPA / CARB compliant engines Diffused GloBug lighting option (GB2000) NEW Model LT6D with compact footprint for easier transport Fluid containment standard on LT6D Multiquip Light Tower shown with GB2000 installed. LIGHT TOWERS TYPE LAMP LB(KG) GBC* CART KW METAL HALIDE 26 (57) GBW WITH PENTAPOD STAND KW METAL HALIDE 56 (26) GBS EQUIP. MOUNT KW METAL HALIDE 34 (6) GBP LAMP ONLY KW METAL HALIDE 22 (0) GB2BW WITH TRIPOD STAND 400W METAL HALIDE 30(4) GB2BS EQUIP. MOUNT 400W METAL HALIDE 30(4) GB2BP LAMP ONLY 400W METAL HALIDE 3 (6) * Generator not included with cart model. GLOBUG 4-SPOT LIGHT TOWERS 400-watt lamps may be positioned independently 3-stage mast extends to 3.8 feet (4.2m) Ideal for job sites or industrial applications Cart adapts to most small portable generators Optional generator Standard Mobile Light Towers FEATURE CONTINUOUS LT-2D LT/GEN 6kW LT2D50SA LT/GEN 20/240 LT6D LT/GEN 6kW VOLTAGE 20/240 50/25 20/240 50/25 20/240 50/25 FREQUENCY/ PHASE 60HZ Ø 50Hz Ø 60Hz/ Ø LT6D5 LT/GEN 6kW Hz/ Ø LT-2D shown KOHLER KDW003 KOHLER KDW003 KOHLER KDW003 KOHLER KDW003,60 (730),60 (730),575,575 GB2000 GloBug Light Tower Diffuser FEATURE LUMENS VOLTAGE VOLTAGE L FAN L/FAN DIFFUSED GB2000 LIGHTING SOURCE 220, V 8.2/.87 3 (4) VOLTAGE BULB WATTAGE LUMENS BULB TYPE LB(KG) GB43SC 20V X 400W 42,000 METAL HALIDE 364(65) 4 LIGHTING SOLUTIONS LIGHTING SOLUTIONS multiquip.com 5

9 LIGHT TOWERS MODULAR LIGHT TOWERS Industrial lighting and power solutions Powered by trusted MQ Power generators 6 lamp units available (MLT20 & MLT25) Elec.(E) & Hyd.(H) brakes (MLT20 & MLT25) Rugged mast design with 360 rotation Withstands 65 MPH winds Mast extends 30 Multiple electrical receptacle packages MLT25H shown Modular Mobile Light Towers/DA7000SSA Generator MLT MLTDA7 FEATURE MODULAR FRAME/ TRAILER MODULAR LT/GEN Modular Mobile Light Towers MLT20E LT/GEN 4 LIGHTS MLT20H LT/GEN 4 LIGHTS MLT20E6 LT/GEN 6 LIGHTS MLT20H6 LT/GEN 6 LIGHTS MLT25E LT/GEN 6 LIGHTS MLT25H LT/GEN 6 LIGHTS CONTINUOUS N/A N/A N/A N/A,062 (48) 6kW 20/240 50/25 20kW 20/240 20kW 20/240 20kW 20/240 20kW 20/240 25kW 25kW VOLTAGE 20/240 /480 20/240 /480 MLTDA7 shown FREQUENCY/ PHASE 60HZ Ø SINGLE PHASE 83/83 X 2 SINGLE PHASE 83/83 X 2 SINGLE PHASE 83/83 X 2 SINGLE PHASE 83/83 X 2 SINGLE PHASE 83/83 X 2 SINGLE PHASE 83/83 X 2 KUBOTA Z482 ISUZU BV-4LE2 ISUZU BV-4LE2 ISUZU BV-4LE2 ISUZU BV-4LE2 ISUZU BV-4LE2 ISUZU BV-4LE2,644 (746) 2,800(,270) 3,00 (,406) 3,00 (,406) 3,00 (,406) 3,00 (,406) 3,00 (,406) SUBMERSIBLE CLEAN WATER PUMPS.25 to 6 diameter discharge Selected models UL and CUL listed Compact and streamlined design with thermal overload protection Single-phase and three-phase motors available Double oil-filled seal provides positive lubrication (selected models) All models fitted with high-quality components to withstand tough job site conditions SUBMERSIBLE TRASH PUMPS DISCHARGE GPM (LPM) TOTAL HEAD Compact design with thermal-overload protection Handles solids up to in diameter PX-400 designed with plastic/stainless steel housing VOLTAGE PHASE (KW) DIAMETER YELLSUB.25(38) 33(25) 5(4.6) 5 Ø 0.25(0.85) 5.3(36) 6(2.72) SS233 2(50) 60(227) 20(6.) 5 Ø 0.5(0.37) 8.(206) 5.5(7) ST2038P 2(50) 60(227) 38(.5) 5 Ø.0(0.75) 7.7(96) 3(4) ST2037 2(50) 73(276) 37(.3) 5 Ø.0(0.75) 7.4(88) 3(4) ST2047 2(50) 87(329) 47(4.3) 5 Ø.0(0.74) 7.4(88) 33(5) ST3020BCUL 3(75) 70(644) 72(22) 230 Ø 2.0(.5) 6.7(70) 67(30) ST3050D* 3(75) 264(999) 86(26) 230/460 3Ø 5.0(3.7) 0.2(259) 20(54) ST425G* 4(00) 380(,439) 25(38) 230/460 3Ø 0(7.4) 4.2(36) 344(56) ST625G* 6(50) 60(2,309) 25(38) 230/460 3Ø 5(.) 4.2(36) 390(77) * Three-phase specify voltage when ordering Models ST3050D, ST425G, ST625G require a Control Box when ordering DISCHARGE GPM MAX HEAD VOLTAGE DIAMETER (LPM) PHASE (KW) PX400 2(5) 72(273) 34(0.3) 5 Ø 0.5(0.37) 0(254) 25() ELECTRIC SUBMERSIBLE PUMPS FEATURE MAX RATED VOLTAGE VOLTAGE ST2040T 2(5) 79(299) 40(2.2) 5 Ø.0(0.75) 0.3(267) 34(5.4) ST200TCUL 2(5) 95(360) 45(3.7) 5 Ø.0(0.75) 0.3(267) 77(35) Modular Mobile Light Towers/SDW225SSA Welder/Generator MLTSDW7 MODULAR LT/WELDER/ GEN 225A 28V 20/240 50/25 KUBOTA Z482,744 (79) 6 LIGHTING SOLUTIONS DEWATERING EQUIPMENT multiquip.com 7

10 CENTRIFUGAL PUMPS CENTRIFUGAL PUMPS Dewatering pumps for a variety of clear water applications Industrial die cast aluminum pump-end design Compact, portable Dependable HONDA gasoline engines Adjustable discharge port Sturdy wrap-around frame HIGH-PRESSURE CENTRIFUGAL PUMPS SUCTION X DISCHARGE GPM (LPM) Honda-powered with low-oil alert High head producing High pressure producing Unique 3 discharge port manifold Excellent for fire emergencies, portable irrigation and equipment cleaning MAX HEAD (KW) QP2H 2x2(5x5) 58(600) 5(35) HONDA 3.5(2.6) 53(24) QP303H 3x3(76x76) 245(93) 98(30) HONDA 4.8(3.6) 77(35) QP402H 4x4(0x0) 425(,65) 00(30) HONDA 7.9(5.9) 45(65) QP205SH QPT205SLT QPT305SLT QP205SDPFF QPT405SLT SUCTION X DISCHARGE 2x.5// (5x38/25/25) 2x.5// (5x38/25/25) 3x.5// (76x38/25/25) 2x.5// (5x38/25/25) 4x3/3/4 (0/76/76/0) GPM (LPM) MAX HEAD MAX PSI (KW) 06(40) 230(70) 00 HONDA 4.8(3.6) 64(29) 26(479) 32(95) 35 HONDA 7.9(5.9) 99(45) 45(550) 328(00) 42 HONDA 0.7(8.0) 0(50) 9(45) 97(60) 85 YANMAR 6.4(4.8) 20(54) 20 (795) 377 (5) 63 HONDA 0.7 (8.0) 305 (37) TRASH PUMPS Rugged die-cast pump casings 2", 3" & 4" suction/discharge Ductile iron impellers Silicon/carbide mechanical seals Easy access clean-out covers " protective roll frame Gasoline & diesel engine models Handles solids up to 2 in. Diameter Optional wheel kits available GASOLINE S SUCTION & DISCHARGE GPM (LPM) MAX HEAD MAX SOLIDS (KW) QP2TH 2x2(5x5) 2(800) 98(30).0(25.4) HONDA 4.8(3.6) 96(43.5) QP3TH 3x3(76x76) 396(,500) 95(29).5(38.) HONDA 7.9(5.9) 42(64) QP4TH 4x4(00x00) 555(2,00) 92(28) 2.0(50.8) HONDA 0.7(8.0) 26(98) DIESEL S QP2TZ 2x2(5x5) 98(750) 95(29).0(25.4) SUBARU- 4.6(3.4) 3(60) HATZ QP3TZ 3x3(76x76) 383(,450) 90(27).5(38.) SUBARU- 6.8(5.) 63(74) HATZ QP4TZ 4x4(00x00) 526(2,000) 85(26) 2.0(50.8) SUBARU- HATZ 9.9(7.4) 265(20) DIAPHRAGM PUMPS Ideal for slow seepage, sludge and heavy debris laden fluid applications Quick easy priming Industrial oil bathed lubricating system Rugged, lightweight aluminum alloy pump body Easily adjusting transverse and in-line flow design Includes wheel kit SUCTION x DISCHARGE GPM (LPM) (KW) MQD2H 2x2(5x5) 50(89) HONDA 3.5(2.6) 25(57) MQD3H 3x3(76x76) 90(342) HONDA 3.5(2.6) 75(79) TRASH PUMPS 8 DEWATERING EQUIPMENT DEWATERING EQUIPMENT multiquip.com 9

11 TRASH PUMPS TRASH PUMPS 6" Skid & Trailer Mount Powerful wet priming system 6" suction/discharge Passes 3" solids Ductile iron impellers Multi-position discharge LED control boxes Strong No. 30 grey iron pump housing Silicon/carbide mechanical seal Multiple DOT approved trailer packages 6" & 8" ACTIVPRIME DIESEL SUCTION & DISCHARGE IN GPM MAX HEAD FT MAX SOLIDS IN MQ62TDD 6x6, DEUTZ,560(707) MQ600TD80 6x6, DEUTZ 2,200(,) ACTIVPRIME TRASH PUMPS Automatic dry priming 29-hour run time Eco-friendly systems Compact design available in skid or trailer mounted models Silent canopy options Auto run/stop options Handles solids 3" and 4" 6" and 8" models 6" - WET PRIME - DIESEL DESCRIPTION GPM MAX HEAD FT AP6 SKID MOUNT 2,300 0 JOHN DEERE AP6S SKID W/ SILENT TOP 2,300 0 JOHN DEERE AP6TB/P TRAILER W/ BALL 2,300 0 JOHN DEERE OR PNTL AP6SAB/P TRAILER W/ BALL 2,300 0 JOHN DEERE OR PNTL W/ 4024TF SILENT CANOPY AP68 SKID MOUNT 2, JOHN DEERE 4024TF AP8S SKID W/ 2, JOHN DEERE SILENT TOP 4024TF AP8TB/P TRAILER W/ BALL 2, JOHN DEERE OR PNTL 4024TF AP8SAB/P TRAILER W/ BALL 2, JOHN DEERE OR PNTL W/ 4024TF SILENT CANOPY LBS 49 2, TF , TF , TF , , , , ,900 PUMP ACCESSORIES Full line of suction hose Full line of discharge hose Float switches Control boxes for submersible pumps Wheel kits for pipe frame pumps DOT approved industrial trailers for trash pumps PUMP HOSES FLOAT SWITCHES FOR SUB PUMPS CONTROL BOXES FOR SUB PUMPS TRASH PUMP WHEEL KITS and TRAILERS Multiquip offers a complete line of suction and Discharge Hoses, in sizes from -/2" to 8" with standard thread or quick-disconnect couplings. Multiquip offers industrial Float Switches, to support dewatering operations. Single and Dual Float Switches available. Multiquip offers rugged Control Boxes, for sub pump operations and electrical protection. Pumps requiring Control Boxes: ST3050D, ST425G and ST625G Optional wheel kits are available for almost every Multiquip trash pump. Easily installed, they simplify mobility on the job site. Industrial towable trailers with fuel cells are available for QP4TZ, MQ62TDD, MQ600TD80 models. PUMP ACCESSORIES 20 DEWATERING EQUIPMENT DEWATERING EQUIPMENT multiquip.com 2

12 WATER TRAILER WATER TRAILERS High strength 500 gallon polyethylene water tank Vented tank feed cap Smooth towing Oversized hose bin Self-priming Multiquip 2" Pump Model QP2H capable of 58 GPM and 5' total head 5' total pump head Left and right front discharge Rear spray bar system Discharge manifold equipped with.5", 2" and standard garden hose connections Fire hydrant fill adapter CAPACITY GAL PUMP GPM MAX HEAD FT WT5C HONDA GX-20 ACCESSORIES - HOSES HOSE TYPE SIZE IN TRAILER (DRY) LBS LENGTH FT Dual Axle DOT Approved COUPLER HS220 SUCTION 2 20 NPT THREAD HSQ220 SUCTION 2 20 QUICK DISCONNECT HSQ225 SUCTION 2 25 QUICK DISCONNECT HD225 DISCHARGE 2 50 NPT THREAD HDQ225 DISCHARGE 2 20 QUICK DISCONNECT HDFNST FIRE HYDR QUICK DISCHARGE DISCONNECT,428 PSI CAPACITY MAYCO MECHANICAL BALL VALVE PUMPS Powerful, 68- Zenith Gasoline or 30- Deutz diesel engines One-piece forged, heat-treated crankshaft 3-speed volume control allows the operator to vary the flow Fully-enclosed splash lubrication box provides clean, positive piston lubrication Ball and valve seat MAX AGGREGATE PUMPING RATE YDS 3 /HR (M 3 /HR) VERTICAL PUMPING HEIGHT HORIZONTAL PUMPING DISTANCE MAYCO HYDRAULIC SWING TUBE PUMPS Versatile shotcrete, masonry block fill, slabs, footings Designed to pump larger aggregate up to -/2 Variable volume output from 0 to 60 cu. yds. per hour Up to,00 psi piston face pressure Digital diagnostic control panel Available with wireless remote control (KW) C30HDG /2(0-2) 25(9) 50(46) 500(52) ZENITH 68(5) 2,90 (,320) C30HDZ /2(0-2) 25(9) 50(46) 500(52) DEUTZ 30(22.3) 2,90 (,320) MAX AGGREGATE PUMPING RATE YDS 3 /HR (M 3 /HR) VERTICAL PUMPING HEIGHT HORIZONTAL PUMPING DISTANCE (KW) WITHOUT FUEL LS300.5(38) 30(23 ) 200(6) 800(243) DEUTZ 67(50) 3,750(70) TURBO LS400.5(38) 40(30) 300(9),000(305) DEUTZ 79(59) 4,760(2,59) TURBO LS500.5(38) 50(38) 300(9),000(305) DEUTZ 79(59) 4,760(2,59) TURBO LS600P.5(38) 60(46) 300(9),000(305) PERKIN TURBO 08(80.5) 6,200(282) CONCRETE/MASONRY PUMPS 22 WATER TRAILER CONCRETE/MASONRY multiquip.com 23

13 CONCRETE MIXERS TOWABLE CONCRETE MIXERS Steel drum or polyethylene versions available Variety of power sources Leaf springs standard on 6- and 9-cu. ft. mixers Oversized dump wheel easier to discharge material 3 tires for safe towing Steel mixers available with 4-, 6- or 9-cu. ft. drums Polyethylene models available with 6- or 9-cu. ft. drums; simplify cleanup while resisting rust and dents Polyethylene Drum Steel Drum STEEL POLY CAPACITY DRUM OPENING CU FT(L) (KW) MC44SE 4(3) 7.5(445) 5V 0.5(.37) MC44SH 4(3) 7.5(445) HONDA 3.5(2.6) MC64SE MC64PE 6(69) 9(483) 5/230V.5(.) MUDTUBS Capacity 0 cf. (.28 m3) Highly durable polyethylene construction resistant to cold weather and UV Our tough Easy Clean tubs can be cleaned in minutes with tap of rubber pallet Resists dents, rust or cracks Mud Tub features 4" x 4" rectangular steel feet Mud Tub W features heavy-duty, high impact resistance 8 inch casters One year warranty Approximate,000 Lb. capacity TUB TYPE DIMENSIONS IN (CM) MUDTUB STATIONARY L (4) W (77.5) H (577.8) MUDTUBW MOBILE L (4) W (77.5) H (77.5) Stationary Mobile 54 (24.4) 8 (36.7) CONCRETE MIXERS MC64SH5 MC64PH5 6(69) 9(483) HONDA 4.8(3.6) MC64SH8 MC64PH8 6(69) 9(483) HONDA 7.9(5.8) MC94SE MC94PE 9(254) 2(533) 5/230V.5(.) MC94SH8 MC94PH8 9(254) 2(533) HONDA 7.9(5.8) PORTABLE CONCRETE MIXERS Mix-N-Go is perfect for homeowners, small jobs and multiple work sites DRUM BATCH CAPACITY DRUM OPENING CONSTRUCTION CU FT(L) MC3SEA STEEL 3(85) 5.5(394) 3/4-, 5V, Ø ELECTRIC MC3PEA POLY 3(85) 5.5(394) 3/4-, 5V, Ø ELECTRIC MC3SBA STEEL 3(85) 5.5(394) B & S MC3PBA POLY 3(85) 5.5(394) B & S 24 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 25

14 PLASTER/MORTAR MIXERS WHITEMAN TOWABLE PLASTER/MORTAR MIXERS Hydraulic-drive options on 2-cu. ft. models Available in 4.5, 6.3, 7-, 9- and 2-cu. ft. models Heavy-duty safety grate with built-in bag cutter 3" tires for safe towing Forklift pockets Steel models offer durable drum up to 3/6 thick Polyethylene drums simplify cleanup while resisting rust and dents Polyethylene Drum STEEL POLY CAPACITY CU FT(L) (KW) Steel Drum DRIVE WM45H* 4.5 (3) HONDA 3.5(3) V-BELT/GEAR ESSICK TOWABLE PLASTER/MORTAR MIXERS Full range of mixers designed for professional masonry contractors Towable mixers with 7, 9 and 2-cubic foot capacities Mechanical drive available in EM20-Series Paddle shaft seals require no greasing Smooth towing whether on the job or on the highway Steel Drum STEEL POLY CAPACITY DRIVE CU FT(L) (KW) EM70SE 7(98.2) 5/230V.5(.) V-BELT/GEAR EM70SH5 7(98.2) HONDA 4.8(3.6) V-BELT/GEAR EM70SH8 7(98.2) HONDA 7.9(5.9) V-BELT/GEAR EM90SE EM90PE 9(254.9) 230V, Ø 3.0(2.2) V-BELT/GEAR EM90SH8 EM90PH8 9(254.9) HONDA 7.9(5.9) V-BELT/GEAR EM20SME5 2(339.8) 230V, Ø 5.0(3.7) MECHANICAL EM20SME53 2(339.8) 230/460V,3Ø 5.0(3.7) MECHANICAL EM20SMH EM20PMH 2(339.8) HONDA 0.7(7.9) MECHANICAL PLASTER/MORTAR MIXERS WM63 6.3(78) HONDA 7.9(5.8) V-BELT/GEAR WM70SE WM70PE 7(98.2) 5/230V,Ø.5(.) V-BELT/GEAR WM70SH5 WM70PH5 7(98.2) HONDA 4.8(3.6) V-BELT/GEAR WM70SH8 WM70PH8 7(98.2) HONDA 7.9(5.8) V-BELT/GEAR WM90SE WM90PE 9(254.9) 230V,Ø 3.0(2.2) V-BELT/GEAR WM90SH8 WM90PH8 9(254.9) HONDA 7.9(5.8) V-BELT/GEAR WM20SHHD WM20PHD 2(339.8) HONDA.7(8.7) HYDRAULIC *Wheelbarrow design POLYETHYLENE DRUMS ESSICK PRO2 MIXERS PRO2 model offers stationary design for silo applications Easy loading operator loads at waist height Hydraulic drive handles tough mix designs including -inch aggregate Powerful Honda engine equipped recoil and electric start Forklift pockets standard on all models Polyethylene drum mixers clean out easily and quickly! These photos show a batch of concrete that was left to dry for more than 24 hours. With a few taps of a mallet, virtually all the dried material falls out of the mixer. It s truly that simple to clean! STATIONARY S CAPACITY CU FT (KW) DRIVE PRO2 2 HONDA GX390.7 (8.7) HYDRAULIC 26 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 27

15 REBAR BENDERS & CUTTERS REBAR BENDERS Compact design for use on the jobsite or in the shop Control knob selects precise bending angle Standard with foot control switch A full variety of rollers and collars are included to accommodate all rebar sizes up to diameter REBAR CUTTERS BENDING CAPACITY BENDING SPEED SECONDS HBC features maximum capacity; powered by 5V electric motor Compact and lightweight for easy portability Replaceable cutting blocks with multiple cutting edges Built-in hydraulic pump with magnetic particle filtering BENDING RANGE ELECTRIC MOTOR OPER. MB25A.0(25.4) 5 SECONDS FOR V,60HZ 227(03) WHITEMAN POWER BUGGIES Heavy-duty frame with 6 dump height 8%-0% greater dumping reach 5% greater dumping angle than competitors Easy Clean Poly Tub WHEEL BASE WBH6 44 (,7.6) WBH6F* 44 (,7.6) WBH6E 44 (,7.6) WBH6EF* 44 (,7.6) LENGTH 03 (2,64.6) 03 (2,64.6) 03 (2,64.6) 03 (2,64.6) MAX LOAD 2,500 (,34) 2,500 (,34) 2,500 (,34) 2,500 (,34) CAPACITY CU. FT (CU.M) 6 (3.5) 6 (3.5) 6 (3.5) 6 (3.5) STARTING SYSTEM FUEL CAPACITY GAL(L) (KW) SPEED MPH (KPH) RECOIL 5.5(20.8).7 (8.7) 7.25 (.66) RECOIL 5.5(20.8).7 (8.7) 7.25 (.66) RECOIL & ELECTRIC RECOIL & ELECTRIC 5.5(20.8).7 (8.7) 7.25 (.66) 5.5(20.8).7 (8.7) 7.25 (.66) * Foam-filled tires POWER BUGGIES CUTTING DIAMETER CUTTING SPEED SECONDS RATED POWER ELECTRIC MOTOR 5V S HBC9B 3/4(9) V,60HZ,Ø 28(2.8) HBC25B (25) V,60HZ,Ø 48(22) 28 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 29

16 CONCRETE VIBRATORS MIKASA MGX VIBRATORS Light weight and powerful 20V motor Ideal for footings and block walls Vibration dampening handle design Two shaft and four head sizes available COMPLETE ASSEMBLY (MOTOR, HEAD, SHAFT) FLEX-SHAFT VIBRATORS HEAD DIAMETER OVERALL LENGTH Gasoline-powered backpack and stationary drive motor or electric handheld motors available Flexible shafts from 2 ft. to 2 ft. long Ideal for footings and block walls Seven heads from 7/8 to 2 5/8 available AMPLITUDE FREQUENCY VPM(HZ) MGX (23) 9.5(2.9) 0.047(.2) 2,000-5,500 ( ) MGX280.(28) 4.7(.4) 0.07(.8) 2,000-5,500 ( ) MGX2825.(28) 9.5(2.9) 0.07(.8) 2,000-5,500 ( ) MGX (32) 9.5(2.9) 0.075(.9) 2,000-5,500 ( ) MGX380.5(38) 4.7(.4) 0.079(2.0) 2,000-5,500 ( ) MGX3825.5(38) 9.5(2.9) 0.079(2.0) 2,000-5,500 ( ) SET.5(5.2) 9.5(4.3).5(5.2) 9.5(4.3).5(5.2) 9.5(4.3) HAND-HELD ELECTRIC MOTORS VOLTAGE RPM LB(KG) CV 20V 0 6,000 (5) CV2 20V 5 8,000 3(6) CV2E 240V 7.5 8,000 3(6) CV3 20V 20 9,250 4(6) CV3E 240V 0 9,250 4(6) GASOLINE DRIVE (KW) MOTOR TYPE LB(KG) BP25H HONDA 2.(.6) STATIONARY/SWIVEL 24() G55H HONDA 4.8(3.6) BACKPACK 74(33) MIKASA MICON HIGH-CYCLE CONCRETE VIBRATORS Patented Micro Computer Controller protects system against shorts or fluctuation in voltage Perfect for zero slump concrete applications Constantly monitors the head to provide appropriate vibration Maintains optimum frequency under virtually any slump condition Extended hose lengths available MICON CONTROLLERS ELECTRICAL REQUIREMENTS ELECTRICAL RECEPTACLES VOLTAGE PHASE CYCLE (HZ) VOLTAGE PHASE CYCLE (HZ) VCA 20V AC VC2B 20V AC MICON VIBRATORS DIAMETER VPM AMPLITUDE HOSE LENGTH CABLE LENGTH VOLTAGE CYCLE (HZ) VH32A4M.25(32) 2, (.7) 3.(4) 65(20) (2.7) VH42A4M.67(42) 2, (2.0) 3.(4) 65(20) (4) VH52A4M 2.0(52) 2, (2.3) 3.(4) 65(20) (5.4) VHW62A4M* 2.4(6) 0,800 0.(2.5) 3.(4) 65(20) (9.9) VHW72A4M* 2.8(72) 0, (2.) 3.(4) 65(20) (22.6) VH32A6M.25(32) 2, (.7) 9.6(6) 65(20) (5) VH42A6M.67(43) 2, (2.0) 9.6(6) 65(20) (6) VH52A6M 2.0(52) 2, (2.3) 9.6(6) 65(20) (8) *Special order only CONCRETE VIBRATORS HEADS AND SHAFTS STEEL HEAD DIAMETERS 7/8(22), -/6(27), -3/8(35), -/6(43), 2-/8(54), 2-5/8(67) FLEXIBLE SHAFT LENGTHS 2(.6), 7(2.), 0(3), 2(3.7), 4(4.3), 2(6.4) 30 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 3

17 CONCRETE VIBRATORS MIKASA FXA HIGH-CYCLE CONCRETE VIBRATORS Ideal for medium- to low-slump applications Motor-in-head design minimizes VMP loss under load Extended hose lengths available Extension cords available HEAD DIA HEAD LENGTH HOSE LENGTH CORD LENGTH CENTRIFUGAL FORCE VPM FXA50A4 2(5) 6-/2(49) 3.(4) 33(0) 2 74(324) 0,800 36(6) FXA50A6 2(5) 6-/2(49) 20(6.) 33(0) 2 74(324) 0,800 55(25) FXA60A4 2-3/8(60) 9-/4(260) 3.(4) 33(0) 4.5,600(726) 0,800 42(9) FXA60A6 2-3/8(60) 9-/4(260) 20(6.) 33(0) 4.5,600(726) 0,800 65(29) WHITEMAN SUPERSCREEDS For flatwork, strikes off over 0,000 sq. ft. per hour with exceptional F numbers Ideal for highway rehabilitation, panel replacement and white-topping applications Instant forward- and reverse-screeding action Removable hydraulic power pack Heavy-duty jack stands allow movement around the job site Optional hydraulic pressure washer to simplify cleanup MAX LENGTH WORKING WIDTH 52(5.8) 4-50 ( ) STRIKE TUBE SPEED 450 RPM DIESEL 28- VANGUARD Up to 52 ft. length 52 FT. W/POWER UNIT,500 (680) OF POWER UNIT 500 (227) SCREEDS HIGH-CYCLE GENERATORS (FOR FXA VIBRATORS) Powers up to three high-cycle vibrators simultaneously 5kVA, 230-volt, 80-cycle output 3,600 watts continuous 60-cycle, single-phase power Reliable Honda engine with recoil start, low-oil shutdown and idle control Lifting bail for easy moving All receptacles GFCI @60HZ GDP5HA 5KVA 230V,2.5A 4KW/3.6KW 20/240V, 60HZ,30/5A (KW) HONDA 0.7(8.0) 235(07) WHITEMAN DUOSCREEDS Blade quickly removed without tools; handle folds for storage Powered by maintenance-free flexible shaft Unique patented reversible blade design allows both form-to-form and wet screeding with a single blade VPM DRIVE SYSTEM SCREED (KW) DSGPULW HONDA GX35.3(.0) 5,500 FLEXIBLE SHAFT MAINTENANCE FREE 32(4.5) BLADE WIDTHS DSBLW 6(.8) 8(2.44) 0(3.0) 2(3.66) 4(4.27) 6(4.88) DUOSCREED BLADE The handheld screed uses a unique reversible blade that is designed for form-to-form and wet screeding. 32 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 33

18 VIBRATORY SCREEDS WHITEMAN TRUSS SCREEDS Durable triangular steel truss spans up to 65 ft. Gas engine- or air-driven vibration, steel truss design Heavy-duty steel construction Optional self-propelled winches (gasoline version only) minimize labor -POWERED AIR-POWERED DESCRIPTION 2.5-FT.(0.76M) TRUSS SECTION WSHE25 57(26) WSHA25 50(23) 5.0-FT.(.5M) TRUSS SECTION WSHE50 95(43) WSHA50 95(43) 7.5-FT.(2.28M) TRUSS SECTION WSHE75 36(62) WSHA75 30(59) 0-FT.(3.0M) TRUSS SECTION WSHE00 90(86) WSHA00 90(86) SELF-PROPELLED WINCH - (LEFT)(RIGHT) WSHESPW(L)(R)* 05(48) END HANDLE SET WSHEH 54(27) WSHAH 54(27) 7.9- HONDA KIT WSHEKIT8H 2(5) 0.7- HONDA KIT WSHEKITH 2(5) 5 SECTION W/WSHEKIT8H MOUNTED WSHE50KIT8H 207(94) 5 SECTION W/WSHEKITH MOUNTED WSHE50KITH 207(94) UNIVERSAL JOINT KIT WSHEKITUJ 22(0) INVERT CROWN KIT WSHEIC 98(45) WSHAIC 62(28) REINFORCEMENT BRACKET WSHRBE 6(2.7) WSHRBA 6(2.7) ADJUSTABLE END BRACKET WSKITAEB 24() WSKITAEB 24() ADJUSTABLE END BRACKET WITH ROLLERS WSKITAEBR 26(2) WSKITAEBR 26(2) HAND WINCH SET WSHW 42(9) WSHW 42(9) *Includes standard mounted 2.5 ft. sections SCREED KITS AND ACCESSORIES WHITEMAN TROWELS Reliable gasoline engines and electric motors Optional QuickPitch Control for fast, precise blade adjustment Equipped with heavy-duty centrifugal clutch Optional manual (hand) clutch Precision balanced for the ultimate finish CA4HM has folding handle COVERAGE MOTOR RPM (KW) CA4HM* 24(60) 3.5(2.6) HONDA CA4HC 24(60) 3.5(2.6) HONDA J36E2 36(94) 2(.5) 5/230V J36H55 36(94) 4.8(3.6) HONDA 60-5 J36S60 36(94) S6(4.5) SUBARU 60-5 J36H90H 36(94) 8.0(6.0) HONDA B46H90 46(,70) 8.0(6.0) HONDA B46S90 46(,70) 9.0(6.7) SUBARU B46HH 46(,70) 9.5(7.) HONDA * Includes handle TROWEL HANDLES Trowel handles are available with either standard or QuickPitch configurations. Padded handle Our new handle design dramatically reduces the vibration transmitted to the operator. These height-adjustable handles will dramatically increase operator comfort and decrease fatigue over an eight-hour day. Smooth-operating blade-pitch control knob WALK-BEHIND TROWELS Universal Joint Kits Adjustable End Brackets Positive-action shut-off switch Invert/Crown Kits Adjustable End Brackets with Rollers QXH QuickPitch Handle SXH TwistPitch Handle 34 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 35

19 WALK-BEHIND TROWELS WHITEMAN HEAVY-DUTY TROWELS High-speed models for burnishing of slabs Heavy-duty gearboxes to handle extra weight and performance of the HDA series Variable-speed transmission on HDA4843H CVT drive system allows the high torque panning and high speed for burnishing slabs COVERAGE BLADES ROTOR RPM (KW) HDA4843H 48(,220) HONDA (8.2) 35(66) FLOAT PANS & TROWEL BLADES Pans: Superflat or flat configurations, for use with ride-on trowels, and flat or domed for use with walk-behind trowels. Allows fast fl oating and easy movement from wet to dry areas. Excellent for applying shake-on toppings. Achieve higher FF numbers and increased production. Available in the following sizes: 24", 36", 46", 48" and 60" Blades: Float, finish and combination float/finish for walk-behind and ride-on trowels Interchangeable with most competitive models. Provides best possible results when used with Whiteman trowels. Unique Enduro Blade series features heavy-duty design, providing up to 50% longer life. Quickchange blades have bolt-less design for fast, easy blade replacement. WHITEMAN TROWELS MECHANICAL DRIVE Twin 36 and 48 models New HHNG5 features air-cooled 35 Vanguard engine Twin Pitch control simultaneously adjusts blade pitch of rotors or disengages to adjust individually CVT Drive System on JWN and HHN Ride-On Trowels allows high-torque panning and high-speed for burnishing slabs PATH WIDTH IN (MM) ROTOR RPM (KW) JWN24HTCSL 75 (,90) HONDA 20 (5.0) 685 (209) HTN27KTCSL 9 (2,30) KOHLER 27 (20) 780 (354) HTN28KTCSL 9 (2,30) KOHLER 28 (2) 800 (363) HHN34TVDTCSL5 9 (2,30) VANGUARD TURBO 34 (25),80 (535) HHNG5 92 (233) 0-80 VANGUARD 35 (26),083 (49) WHITEMAN TROWELS MECHANICAL DRIVE/HYDRAULIC STEERING Patented hydraulically controlled steering CVT Drive System allows high-torque panning and high-speed for burnishing slabs Patented Helical gearbox achieves 98% efficiency the world s most reliable gearbox Patented Twin-Pitch control for simultaneous blade adjustment of both rotors PATH WIDTH IN (MM) ROTOR RPM (KW) WHITEMAN TROWELS HYDROSTATIC DRIVE Hydrostatic drive and patented hydraulically controlled steering Optimum speed and torque range for floating and finishing Heaviest-duty spider and wear plate assembly No belts, pulleys or gear boxes 8-ft. and 0-ft. models available HHXD5 9 (2,30) VANGUARD 34 (25) 440 (658) RIDE-ON TROWELS PATH WIDTH IN (MM) ROTOR RPM (KW) HTXD6i 92 (2,330) 0-60 YANMAR TURBO DIESEL STXD6i 7 (2,970) 0-30 YANMAR TURBO DIESEL 55 (40) 2,00 (952) 55 (40) 2,270 (,030) 36 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 37

20 SAWS & BLADES DIAMOND BLADES Blades for concrete, asphalt, masonry, ceramics and stone Core Bits for concrete, asphalt, masonry, ceramics and stone Top quality manufacturing Guaranteed performance Laser Weld Technology For Blade and Core Bit specifications, please request the Diamond Cutting Tools brochure. MASONRY SAWS MP SERIES Gasoline or electric models 4 (356mm) blade capacity 5 (27mm) depth of cut Mounted carrying handles Open-back design Industrial water pump Models MP5E, MP20E, MPH MASONRY SAWS MP2 SERIES Gasoline or electric models 20 (508mm) blade capacity 8 (229mm) depth of cut Open-back design Foot-pedal/screw-thread cutting head control Industrial water pump Models MP25E, MP25E3, MP275E3, MP2H Shown with optional saw stand POWER BLADE CAPACITY IN CUTTING DEPTH IN LB MP & MP2 MASONRY SAWS MP5E 5/230V ELECTRIC MP20E 5/230V ELECTRIC MPH HONDA GX MASONRY SAWS MP3 SERIES Compact, light weight Powerful 2.5 5V Universal motor 4 (356mm) blade capacity 5 (27mm) depth of cut Precision cuts Chop saw design Dry/wet cutting POWER BLADE CAPACITY CUTTING DEPTH IN IN LB MP3 5V ELECTRIC Accessories DESCRIPTION LB MS3SS PORTABLE SUPPORT STAND 25 MS3WK WATER KIT, INCLUDES PUMP, TRAYS, PLUMBING 20 TILE SAWS Rugged and portable Precision cuts on ceramics, masonry and stone 7 /0 (78/254mm) blade capacity 7 /24 (43/60mm) rip cut capacities Powerful electric motors Industrial conveyor cart design POWER BLADE CAPACITY IN CUTTING LENGTH IN LB TP7X 5V ELECTRIC TP24 5V ELECTRIC TP24X 5V ELECTRIC Accessories DESCRIPTION LB TSS PORTABLE SUPPORT STAND, TP7X AND TP24 3 TSSX PORTABLE SUPPORT STAND, TP24X 32 Optional saw stand available SAWS & BLADES MP25E 230V ELECTRIC MP25E3 230V ELECTRIC MP275E3 230V ELECTRIC MP2H HONDA GX CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 39

21 SAWS STREET PRO SAWS Gasoline engine and electric motor models 0-20 (25-508mm) cutting capacity Push and self-propelled models Rugged industrial components Minimal maintenance design MOTOR (KW) BLADE CAPACITY CUTTING DEPTH LB(KG) SLAB SAVER FCG-6HA HONDA 5.5(4.) 0(25.4) 3.25(83) 06(48) SP SERIES SP8 HONDA (9.7) 8(457) 7 (78) 270(22) SP5E6 230V ELECTRIC 5(3.7) 6(406) 5.5(40) 235(06.8) SP2 SERIES SP23H20A HONDA (9.7) 20(508) 8 (203) 280(27) SP2S3H20A HONDA (9.7) 20(508) 8 (203) 280(27) SP2S20H HONDA 20.8(5.5) 20(508) 8 (203) 400(8.8) HAND-HELD CORE DRILLS Convenient, adjustable shoulder rest Three-position hand grip Internal water feed Lateral slip clutch Carry case, tools included DESCRIPTION CAPACITY IN(CM) CDMH HAND-HELD WET 3(7.6) DRY 5(2.7) Bits sold separately. DRILLING STANDS For use with MQ core drill motors Straight or angle drilling to 45 Large bore with bolt-type anchor VAC rings available Quick change-over mounting plates SPEED RPM 2 0 TO 2,200 Drill motor sold separately. CORE DRILL MACHINES DESCRIPTION CDM2CSA MINI ANGLE BASE COMBO STAND CDM3CSA ANGLE BASE CDM3CS STRAIGHT MAST DRILL MOTORS Single and dual speed units Universal mounts All ball and roller bearings For diamond coring, reinforced concrete, tile, masonry or natural stone MOTOR SPEED DM5A9C MULTIQUIP 5 2-SPEED W/CLUTCH DM4094 MILWAUKEE 20 2-SPEED DM4096 MILWAUKEE 20 2-SPEED W/CLUTCH Bits sold separately. 40 CONCRETE/MASONRY CONCRETE/MASONRY multiquip.com 4

22 NOTES ORDERING PARTS ONLINE Ordering parts has never been easier! Choose from three easy options: Best Deal ORDER VIA INTERNET (Dealers Only): Order parts on-line using Multiquip s SmartEquip website! View Parts Diagrams Order Parts Print Specification Information Go to and click on Online Ordering to log on and save! If you have an MQ Account, to obtain a Username and Password, us at: parts@multiquip.com. To obtain an MQ Account, contact your District Sales Manager for more information. Use the internet and qualify for a 5% Discount on standard orders for all orders which include complete part numbers.* ORDER VIA FAX (Dealers Only): All customers are welcome to order parts via Fax. Domestic (US) Customers dial: PARTS-7 ( ) Fax your order in and qualify for a 2% Discount on standard orders for all orders which include complete part numbers.* ORDER VIA PHONE: Note: Discounts Are Subject To Change Note: Discounts Are Subject To Change Domestic (US) Dealers Call: NON-DEALER CUSTOMERS: Contact your local Multiquip Dealer for parts or call for help in locating a dealer near you. INTERNATIONAL CUSTOMERS: should contact their local Multiquip Representatives for Parts Ordering information. WHEN ORDERING PARTS, PLEASE SUPPLY: Dealer Account Number Dealer Name and Address Return Fax Number Applicable Model Number Shipping Address (if different than billing address) Quantity, Part Number and Description of Each Part Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Multiquip Inc. and its subsidiary companies makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy of the engine power rating. Users are advised to consult the engine manufacturer s owners manual and its website for specific information regarding the engine power rating. SPECIFY PREFERRED METHOD OF SHIPMENT: UPS/Fed Ex (Priority One, Ground, Next Day or Second/Third Day) DHL Truck NOTICE: All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. 42 All major credit cards accepted. multiquip.com 43

23 For more information or to request a specific product brochure Call: International: MULTIQUIP INC. 890 Wilmington Avenue CARSON, CALIFORNIA TEL: TEL: FAX: mq@multiquip.com SALES DEPARTMENT TEL: FAX: FAX: PARTS DEPARTMENT TEL: FAX: FAX: SERVICE DEPARTMENT TEL: FAX: INTERNATIONAL sales, PARTS, service TEL: Connect with us on COPYRIGHT 203, MULTIQUIP INC. REVISION (0-3_BD)