PLCC-2 Bathtub Type. Water clear resin

Transcription

1 Features Package Product features Dominant wavelength Spatial distribution Die materials Rank grouping parameter Assembly methods (customer) Soldering methods PLCC-2 Bathtub Type. Water clear resin Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H ) Wide operation temperature range. Storage Temperature : -40 ~120 Operating Temperature : -40 ~100 Operation Guarantee Spatial distribution characteristics. (2θ1/2 : 120deg) Corresponding to a use requiring high reliability in cars etc... Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. Lead free soldering compatible RoHS compliant Blue Green Yellow Green Yellow Orange Red 120 deg. : 470nm (VCPB,VCLB) : 525nm (VCPG,VCMG) 561nm (VFHG,VFJG,VFGG) : 570nm (VFHP,VFJP,VFGP) : 589nm (VFHY,VFJY,VFGY) : 606nm (VFHA,VFJA,VFGA) : 616nm (VFHV,VFJV,VFGV) 626nm (VFHR,VFJR,VFGR) VC :InGaN VF :AlGaInP Sorted by luminous intensity and wavelength and taped according to rank. Corresponding to surface mounter. Corresponding to reflow soldering / Manual Soldering Taping dimensions ESD-withstand voltage 2,000pcs(standard)per reel in a 8mm width tape. Reel diameter : φ180mm AlGaInP:Up to 2kV (HBM), InGaN:Up to 1kV(HBM) Reference Recommended Applications SW lighting for car indicators, meter panel, car audio and heater control, etc Page 1

2 Color and Luminous Intensity Part No. Material Emitted Color Lens Color Dominant Wavelength Luminous Intensity Luminous Flux λ d (nm) Iv (mcd) φv(lm) Optical Efficiency (lm/w) TYP. I F( ma) MIN. TYP. I F( ma) TYP. I F (ma) (Reference) VCPB1104LS Blue 470 VCLB1104LS InGaN VCPG1104LS VCMG1104LS VFHG1104LS Green VFJG1104LS VFGG1104LS VFHP1104LS Yellw VFJP1104LS Green VFGP1104LS VFHY1104LS Water VFJY1104LS Yellw Clear VFGY1104LS AlGaInP VFHA1104LS VFJA1104LS Orange VFGA1104LS VFHV1104LS VFJV1104LS VFGV1104LS Red VFHR1104LS VFJR1104LS VFGR1104LS Note : The luminous intensity(i v ) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : I V ±10%, λd... ±1nm) Page 2

3 Absolute Maximum Ratings Item Symbol VCPB VCLB VCPG VCMG VFHG VFJG VFGG Unit Power Dissipation P d mw Continuous Forward Current I F ma Repetitive Peak Forward Current 1 I FRM ma Derating 2 I F ma/ I FRM ma/ Reverse Voltage V R V Operating Temperature T opr -40~+100 Storage Temperature T stg -40~+120 Item Symbol VFHP VFJP VFGP VFHY VFJY VFGY Unit Power Dissipation P d mw Continuous Forward Current I F ma Repetitive Peak Forward Current 1 I FRM ma Derating 2 I F ma/ I FRM ma/ Reverse Voltage V R V Operating Temperature T opr -40~+100 Storage Temperature T stg -40~ IFRM Measurement condition / VC :Pulse Width 0.1ms, Duty 1/10 VF :Pulse Width 1.0ms, Duty 1/20 2 VFGY:Ta=71 or higher Other:Ta=85 or higher Page 3

4 Absolute Maximum Ratings Item Symbol VFHA VFJA VFGA Unit Power Dissipation P d mw Continuous Forward Current I F ma Repetitive Peak Forward Current 1 I FRM ma Derating 2 I F ma/ I FRM ma/ Reverse Voltage V R V Operating Temperature T opr -40~+100 Storage Temperature T stg -40~+120 Item Symbol VFHV VFJV VFGV VFHR VFJR VFGR Unit Power Dissipation P d mw Continuous Forward Current I F ma Repetitive Peak Forward Current 1 I FRM ma Derating 2 I F ma/ I FRM ma/ Reverse Voltage V R V Operating Temperature T opr -40~+100 Storage Temperature T stg -40~ I FRM Measurement condition / VC :Pulse Width 0.1ms, Duty 1/10 VF :Pulse Width 1.0ms, Duty 1/20 2 VFGA,VFGV,VFGR :Ta=71 or higher Other :Ta=85 or higher Page 4

5 Thermal Characteristics Ite m J unction Temperature (MAX.) Thermal Resistance (TYP.) (J unction/ am bie nt) Thermal Resistance (TYP.) (J unction/ Solde r Point) Ra tings S ymbol VCP VCLB VCMG VFH VFJ VFG Unit T j R (th j-a) /W R (th j-s ) /W Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm Page 5

6 Electro-Optical Characteristics Item Forward Volta ge V F (V) Reverse Curre nt I R(μA) Peak Wavelength Dominant S pectral L ine Half Width λp(nm) λd(nm) Δλ (nm) Conditions Half Inte nsity Angle 2θ1/2(deg.) TYP. MAX. I F (ma) TYP. I F (ma) TYP. TYP. TYP. I F (ma) TYP. I F (ma) VCP B1104L S VCL B1104L S VCP G1104L S VCMG1104L S VF HG1104L S VF J G1104L S VF GG1104L S VF HP 1104L S VF J P 1104L S VF GP 1104L S VF HY1104L S VF J Y1104L S VF GY1104L S VF HA1104L S VF J A1104L S VF GA1104L S VF HV1104L S VF J V1104L S VF GV1104L S VF HR1104L S VF J R1104L S VF GR1104L S Note: The dominant wave length (λd) above is the setup value of the sorting machine. (Tolerance : λd ±1nm) Page 6

7 Luminous Intensity Rank Intensity Tolerance each Rank : +/-10% R ank I V (mcd) VCPB VCL B VCPG VCMG VF HG VF J G VF GG MIN. MAX. I F =10mA I F =30mA I F =10mA I F =30mA I F =20mA I F =20mA I F =50mA B B B B B4 B B B6 B6 B B7 B B8 B BX BY BY BZ BZ C C C2 C1 C C3 C C C C C7 C7 C7 C C CX CY CZ 820 1,000 CZ D1 1,000 1,200 D2 1,200 1,500 D3 1,500 1,800 D4 1,800 2,200 Please contact our sales staff concerning rank designation Page 7

8 Luminous Intensity Rank Intensity Tolerance each Rank : +/-10% R ank I V (mcd) VF HP VF J P VF GP VF HY VF J Y VF GY MIN. MAX. I F =20mA I F =20mA I F =50mA I F =20mA I F =20mA I F =50mA B B B B B B B B B BX BX BY BZ BZ C C1 C C2 C2 C C3 C C4 C4 C C5 C C6 C C C C9 CX CY CY CZ 820 1,000 D1 1,000 1,200 D2 1,200 1,500 D3 1,500 1,800 D4 1,800 2,200 ランク指定については 担当営業へお問い合わせください Page 8

9 Luminous Intensity Rank Intensity Tolerance each Rank : +/-10% Rank I V (mcd) VFHA VFJA VFGA VFHV VFJV VFGV VFHR VFJR VFGR MIN. MAX. I F =20mA I F =20mA I F =50mA I F =20mA I F =20mA I F =50mA I F =20mA I F =20mA I F =50mA B B B B B B B B B BX BY BZ C C1 C C2 C2 C C3 C3 C C4 C4 C4 C4 C C5 C C6 C6 C C7 C C CX CY CY CY CY CZ 820 1,000 D1 1,000 1,200 D1 D1 D2 1,200 1,500 D3 1,500 1,800 D4 1,800 2,200 Please contact our sales staff concerning rank designation Page 9

10 Color Tone Groups (λd) 450nm 500nm VC B Type 470nm VCPB (I F =10mA) B C D MIN MAX VCLB (I F =30mA) B C D MIN MAX ( unit: nm ) Tolerance: +/-1nm 550nm 600nm 650nm VC G Type 52 nm VF G Type 561nm VF P Type 570nm VF Y Type 589nm VF A Type 606nm VF V Type 616nm VF R Type 626nm VCPG (I F =10mA) A B C D E MIN MAX VCMG (I F =30mA) A B C D E MIN MAX VFHG (I F =20mA) C D MIN MAX VFJ G (I F =20mA) C D MIN MAX VFGG (I F =50mA) C D E MIN MAX Please contact our sales staff concerning rank designation Page 10

11 Color Tone Groups (λd) 450nm 500nm 550nm 600nm VC B Type 470nm VC G Type 52 nm VF G Type 561nm VF P Type 570nm VF Y Type 589nm VFHP (I F =20mA) A B C MIN MAX VFJ P (I F =20mA) A B C MIN MAX VFGP (I F =50mA) A B C MIN MAX VFHY (I F =20mA) D E MIN MAX VFJ Y (I F =20mA) D E MIN MAX VFGY (I F =50mA) D E MIN MAX ( unit: nm ) Tolerance: +/-1nm 650nm VF A Type 606nm VF V Type 616nm VF R Type 626nm VFHA (I F =20mA) C D MIN MAX VFJ A (I F =20mA) C D MIN MAX VFGA (I F =50mA) C D MIN MAX Please contact our sales staff concerning rank designation Page 11

12 Color Tone Groups (λd) 450nm VC B Type 470nm ( unit: nm ) Tolerance: +/-1nm 500nm 550nm 600nm 650nm VC G Type 52 nm VF G Type 561nm VF P Type 570nm VF Y Type 589nm VF A Type 606nm VF V Type 616nm VF R Type 626nm VFHV (I F =20mA) B C MIN MAX VFJV (I F =20mA) B C MIN MAX VFGV (I F =50mA) B C MIN MAX VFHR (I F =20mA) A B MIN MAX VFJR (I F =20mA) A B MIN MAX VFGR (I F =50mA) A B C MIN MAX Please contact our sales staff concerning rank designation Page 12

13 Package Dimensions (Unit: mm) MASS: (33.0)mg Tolerance:±0.2 Recommended Soldering Pattern (Unit: mm) Taping Specification Quantity: 2,000pcs/ reel (standard) (Unit: mm) Page 13

14 Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to room temperature after the first reflow) in order to prevent the LED resin from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency s 1 time (MAX.) (MAX.) (MAX.) Page 14

15 Reliability Testing Result R eliability Tes ting R es ult R oom Temp. Operating Life Applicable S tandard Tes ting Conditions Duration Failure 4701/100(101) Ta = 25, I F = Maxium R ated Current 1,000 h 0/20 High Temp. Operating Life 4701/100(101) Ta = 85 I F = Derating Value 1,000 h 0/20 Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. S torage Life Thermal S hock Thermal S hock Operating High Temp. S torage Life Low Temp. S torage Life Cycled Temp. Humidity Operating Life R es is tance to R eflow S oldering 4701/100(101) 4701/100(102) 4701/100(103) 4701/100(105) 4701/100(105) 4701/200(201) 4701/200(202) 4701/200(203) 4701/300(301) E lectric S tatic Dis charge (E S D) /300(304) Vibration, Variable Frequency 1 Reference test 4701/400(403) Ta = -40, IF = Maxium R ated Current 1,000 h 0/20 Ta = 60, 90%, I F = Maxium R ated Current 1,000 h 0/20 Ta = 60, 90% 1,000 h 0/20 Ta = - 40 ~ 120 (each 15min.) 1,000 cycles 0/20 Ta = - 40 (OFF) ~ 85 (ON) each 15min. I F = Derating Value 1,000 cycles 0/20 Ta = 120 1,000 h 0/20 Ta = -40 1,000 h 0/20 Ta = - 30 (2h) ~ 80, 95%(2h), 8h/cycle I F = Derating Value 5min on-off Mois ture S oak : 30, 70%, 672h Preheat : 150 ~180 (120s Max.) S oldering Temp. : 260 (5s ) 30 cycles 0/20 Twice 0/20 C = 100pF, R 2 = 1.5KΩ, ±2,000V once each polarity 0/ m/s 2 (10G), 100 ~ 2KHz, 20min. XYZ each direction 2 h 0/10 Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Forward Voltage Reverse Current Iv VF IR I F Value of each product Luminous Intensity I F Value of each product Forward Voltage V R = Maximum Rated Reverse Voltage V Cosmetic Appearance - - Testing Min. Value < Spec. Min. Value x 0.5 Testing Max. Value Spec. Max. Value x 1.2 Testing Max. Value Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking Page 15

16 Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the Foreign Exchange and Foreign Trade Control Law, it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: Page 16