Improves Fuel Economy Safe on Turbos and Intercoolers Unique Dual-Action Spray System Use Every 10,000 Miles

Transcription

1 GDI IVD Intake Valve Cleaner Groundbreaking technology reaches intake valves at 150X more concentration than any premium fuel system additive on the market. The first product PROVEN to clean damaging deposits from intake valves on all gasoline powered engines, without top-engine disassembly. PROVEN to remove up to 46% of carbon buildup Excellent GDI (gasoline direct injection) valve deposit removal Dissolves and lifts deposits from ALL TYPES of gasoline powered engines Delivers concentrated PEA (polyether amine) detergency directly to the valves Increases Power and Torque Stabilizes Rough Idle Solves Rough Starting Problems Reduces Emissions Improves Fuel Economy Safe on Turbos and Intercoolers Unique Dual-Action Spray System Use Every 10,000 Miles Easy to use Spray past the MAF sensor through the air intake Deposits form in every fuel system, but the amount and how quickly they form depends on the quality of fuel and oil you use, your driving style and engine type. GDI (gasoline direct injection) engine intake valves are prone to rapid deposit buildup because they never get cooled or washed with fuel. Deposits form in as few as 5,000 to 10,000 miles, restricting proper airflow and increasing operating temps. SYMPTOMS include hard starts, rough idle, poor acceleration, reduced fuel economy, excess emissions and power loss. Part No. Package Type Net Wt. Units/Case Can 11 oz. 12 Unit Dimensions Case Dimensions 7.75 H x 2.63 W x 2.63 D 8.1 H x 8.3 W x 11.1 D crcindustries.com TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A0214PSS-8M 2015 CRC Industries, Inc.

2 1-TANK Power Renew Display FREE with Purchase of 4 Cases Pre-packed floor display ships complete with 4 cases (24 bottles) of CRC 1-TANK POWER RENEW Includes Gasoline Formula #05815 (3 cases) & Diesel Formula #05816 (1 case) Easy to assemble step-by-step, diagrammed instructions included Eye-catching display for increased profits at your store or shop PROVEN RESULTS after the FIRST use! Diesel 97% Total Power Recovery 100% Power Restoration 100% Misfire Recovery 99% Injector Flow Improvement 99% Injector Flow Improvement 100% Deposit Removal 5.7% MPG Increase Get back the power, performance and MPG you ve been missing! Fuel quality differs from pump to pump and, over time, contaminants will cause carbon deposit buildup throughout the fuel system. Carbon deposits harden on intake valves, piston heads, cylinder walls and injectors and lead to decreased MPG, hesitation, stalling, pre-ignition, loss of power and excess exhaust emissions. Today s engines are so finely tuned that even microscopic deposit formations can cause performance issues. Using 1-TANK POWER RENEW will provide a complete fuel system cleanup. Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions (Gas) (Diesel) CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc.

3 Mass Air Flow Sensor Cleaner The ORIGINAL Mass Air Flow Sensor Cleaner Unique precision cleaner specifically developed for cleaning the sensitive components of mass air flow sensors Plastic safe formula backed by proven test data to safely and easily clean MAF sensors without damaging sensitive components Include MAF sensor cleaning as part of every air filter service PLASTIC SAFE Increases Horsepower Leaves No Residue Reduces Rough Idle Improves Fuel Economy Decreases Hesitation & Pinging Proven Dynamometer Results! Do not use on vehicles with a Karman Vortex air flow sensor (e.g. Toyota Supra Turbos, Mitsubishis and most Lexus vehicles) Brake, carburetor or air intake cleaners can damage sensitive MAF components. Stop using aggressive chemicals like brake, carburetor and air intake cleaners to clean dirty mass air flow sensors! These aggressive cleaners can do serious and expensive damage to sensitive MAF components, especially plastic. CRC Mass Air Flow Sensor Cleaner is the only product backed by proven test data to safely and easily clean MAF sensors without damaging the wires or plastic housing. Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions This product is extremely flammable. Do not apply while equipment is energized. CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc.

4 Mass Air Flow Sensor Cleaner & Throttle Body & Air-Intake Cleaner SINGLE USE TWIN PACK: Everything you need to remove harmful dirt and gum accumulation from a vehicle s air intake system. MASS AIR FLOW (MAF) SENSOR CLEANER PLASTIC SAFE Increases Horsepower Leaves No Residue Reduces Rough Idle Improves Fuel Economy Improves MPG Decreases Hesitation & Pinging Proven Dynamometer Results! THROTTLE BODY & AIR-INTAKE CLEANER Cleans power-robbing gums and varnishes from throttle body and air intake systems Eliminates hesitation and rough idling Safe for use on coated throttle bodies CRC MASS AIR FLOW Sensor Cleaner A dirty MAF sensor hot wire can cause many problems including difficult starting, poor acceleration, pinging, rough idling, excessive emissions, wasted fuel, and power loss. CRC recommends cleaning the sensor every time the air filter is cleaned or replaced. CRC Mass Air Flow Sensor Cleaner cleans dust, pollen, soot, and air filter oil that can burn onto the hot wires causing faulty read-outs and decreasing engine performance. Most brake, carb, and air intake cleaners are harmful to plastics, rubber o-rings and painted parts causing them to become brittle and weak. CRC Mass Air Flow Sensor Cleaner is PLASTIC SAFE and leaves no residue. CRC THROTTLE BODY/AIR-INTAKE Cleaner Dirt and gum accumulation in your throttle body can restrict and cause your throttle plate to stick. The result is decreased performance, stalling and poor airflow. CRC Throttle Body & Air Intake Cleaner cleans gum and varnish for easier starting and smoother engine performance. Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions twin pack oz, 1-5 oz H X 2.01 W X 4.25 D 5.75 H X 6.75 W X 8.75 D can 4.5 oz H X 2.13 W X 2.13 D 5.7 H X 6.7 W X 8.7 D can 11 oz H X 2.63 W X 2.63 D 8.1 H X 8.3 W X 11.1 D can 5 oz H X 2.13 W X 2.13 D 5.7 H X 6.7 W X 8.7 D can 12 oz H X 2.63 W X 2.63 D 8.1 H X 8.3 W X 11.1 D This product is extremely flammable. Do not apply while equipment is energized. CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A0911PSS4-3M 2014 CRC Industries, Inc.

5 Concentrated Cetane Boost CRC Concentrated Cetane Boost raises the cetane number of diesel fuel by up to 7 points for faster acceleration, increased MPG & MAX Power! High-performance diesel engines operate best on fuel with a cetane number of 50 or higher, but most pumps only offer a cetane rating of about 45, with some as low as 35 numbers. Reduces ignition lag-time allowing fuel to ignite earlier in the cycle for more complete combustion Contains 100% active additive; no solvents or alcohol Reduces the need for downshifting during high-load conditions Boosts cetane (fuel ignitability) up to 7 numbers Increases power for towing Maximizes fuel economy Reduces engine wear Reduces white smoke, emissions and objectionable odors Provides superior cold-temperature starting Reduces misfiring during warm-up and in cold weather Most diesel fuel offered in North America has a cetane rating of 40-45, but highperformance diesel engines run best with a cetane number of 50 or higher. If the cetane number in your fuel is too low you could see excess white smoke, reduced power, increased oil sludge, decreased fuel economy and increased overall engine wear. Use CRC Concentrated Cetane Boost with every fill up for more complete combustion, fewer emissions, increased performance, faster acceleration and increased MPG. Use in all diesel engines. Compatible with biodiesel and all types of exhaust emission systems such as diesel particulate filters (DPFs.) This diesel fuel additive complies with the federal ultra-low sulfur content requirements for use in diesel motor vehicles and non-road engines. Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions 7.88 H x 2.13 W x 3.5 D 8.5 H x 7.4 W x 12.6 D For best results with up to a 7 point cetane increase, add 1 oz. of CRC Cetane Boost per 5 gallons of diesel fuel (one bottle to 80 gallons). TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. 2A1014PSS-3M 2014 CRC Industries, Inc.

6

7 Salt Terminator Engine Flush, Cleaner & Corrosion Inhibitor Saltwater, salt air and road salt can lead to rust, corrosion, vehicle damage and costly repairs. SALT TERMINATOR dissolves destructive salt debris that can t be removed by water alone and leaves a protective coating, guarding against future salt corrosion. Regular maintenance with SALT TERMINATOR can help extend the life of vehicles, trailers, tools, gear and equipment. ALT TERMINATOR also cleans and protects internal marine engine components, extending the life of outboards, sterndrives, jet boats and personal watercraft. Great for Hundreds of Applications Including: Marine Automotive RV Powersports Not just for salt corrosion! Freshwater will also corrode internal engine components. Spray on SALT TERMINATOR to clean and protect virtually any surface. The SALT TERMINATOR Mixer automatically ly dilutes the concentrate and siphons it through a standard garden hose. No scrubbing or rinsing required! Heavy Trucking Construction Utility Service Hardware Home Removes heavy salt deposits without leaving behind a spotty residue like other similar products. CRC is committed to developing safe, environmentally responsible products. The SALT TERMINATOR formula is biodegradable, contains no ozone depleting chemicals, no carcinogens, no hazardous air pollutants, no nonyl phenols, no heavy metals, no phosphates, and no butyl. Part No. Net Wt. / Package Type Units per Case Unit Dimensions Case Dimensions SX10 10 fl oz Ready-to-Use spray H X 2.3 W X 2.3 D 9 H X 8.8 W X 8.5 D SX22 22 fl oz Ready-to-Use spray H X 4 W X 3 D 10.6 H X 12.6 W X 12.9 D SX32 32 fl oz concentrate H X 5.3 W X 2.8 D 10 H X 14.8 W X 10.3 D SX32M 32 fl oz concentrate w/ mixer H X 7.3 W X 3 D 10 H X 14.8 W X 10.3 D SX128 1 gallon concentrate H X 7 W X 5 D 10.8 H X 14.8 W X 14.8 D SX55 55 gallon concentrate 1 35 H X 24.5 W X 24.5 D 35 H X 24.5 W X 24.5 D SXMXR mixer unit H X 2.4 W X 2.7 D 8.5 H X 7.78 W X D TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc CRC Industries, Inc.

8 Marine Cleans and Protects Boats, PWCs and Trailers Motor/Cooling System Flush for Marine Engines Removes Salt Deposits from Tubes, Towables, Rafts, Vinyl Seat Cushions, Life Preservers, Life Vests, Water Skis, Wakeboards and Other Water Toys and Gear Use to Spray Down Fishing Tackle Automotive/RV/Trucking Cleans and Protects Undercarriage, Rocker Panels, Side Skirts, Muffler and Exhaust System, Brakes, Wheels, Tires, Bumpers Washes Away Build-Up of De-Icing Agents on 5th Wheel Helps Prevent Corrosion of Heavy Truck Trailer Rear Door Frames Use to Spray Down RVs, Campers, Towable Travel Trailers Use to Flush Trailer Brakes Construction/Utility Service/Maintenance Tools, Construction Vehicles, Utility Bodies and Tool Boxes, Cargo Trailers, Utility Service Trucks Municipal Maintenance/Service Vehicles, Landscape Equipment, Snow Plows, Salt Spreaders Waste Removal and Recycling Vehicles Hardware/Home Tools and Tool Boxes, Lawn and Garden Equipment, Patio Furniture, Metal Window Frames, Metal Door Screens, Frames and Thresholds, Bicycles Powersports Keeps Powersport Vehicles and Equipment Looking Like New Ideal for Motorcycles, Scooters, ATVs, Motocross and Trail Bikes, Jet Skis, Snowmobiles Cleans and Protects Vehicle Trailers Protects Chrome-Plating and Other Metals from Corrosion TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A1114PSS-3M 2014 CRC Industries, Inc.

9 Rust Converter INSTANTLY NEUTRALIZES RUST CRC Rust Converter instantly changes rusted surfaces into primed, paintable surfaces! Prevents future rusting by sealing out moisture and other outside elements. No more sanding and scraping! Simply remove loose rust and apply product. Fast-drying coating. Second coat may be applied in 20 to 30 minutes. Excellent primer. Treated surfaces may be used as a finish coat, or painted over with an oil-based paint. AEROSOL FORMULA IS PERFECT FOR HARD-TO-REACH AREAS Converts Rust to a Tough Black Primer in One Easy Step AEROSOL: Spray on any rusted metal surface. Rust will instantly be converted to a black primer.* Protective coating helps prevent future rust and may be painted if desired. BULK LIQUID: Provides the same great performance as the aerosol product. Brush on the fast-drying, milky-white vinyl/acrylic coating to stop rust in its tracks. Use on cars, truck frames/beds, boats and trailers, railings, fences, iron or steel furniture, equipment, tools and more. Hundreds of applications for Automotive, Marine, RV, Powersports, Heavy Trucking, Construction, Utility Service, Hardware and Home. Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions H X W X D H X W W X D H X W X D 10.2 H X W W X D H X W X D H X W W X D *Depending on conditions, conversion may appear brown. CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc.

10

11 Brakleen BRAKE PARTS CLEANER WITH POWER JET TECHNOLOGY Meets All State & Federal VOC Regulations CRC Brakleen is the best non-chlorinated product on the market, specifically formulated to meet VOC restrictions nationwide! This powerful formula removes brake fluid, grease, oil and other contaminants fast and effectively. Use on all brake related parts including rotors, cylinders, drums, linings, brake shoes, calipers, clutch discs and disc brake pads. Safe for ABS, disc and drum brakes. Use Brakleen and where compliance calls for a Low VOC, chlorine-free product. NEW! Power Jet TM Spray Nozzle The Strongest Name in Brake Parts Cleaner Just Got STRONGER! CRC Brakleen utilizes Power Jet technology. This new spray nozzle produces a burst of product that forcefully breaks away contaminants, while the formula cleans and degreases instantly. The strength behind the Power Jet spray nozzle means faster work, requiring less product per job. The ergonomically-designed Power Jet spray nozzle is easier to press, giving the user a quick, precise shot of product where needed. Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions Brakleen Non-Chlorinated Brake Parts Cleaner 50 State Formula aerosol can 14 oz H x 2.63W x 2.63D 9.7H x 8.3W x 11.1D aerosol can 14 oz H x 2.63W x 2.63D 9.7H x 8.3W x 11.1D bottle 1 gallon H x 5W x 6.13D 11.44H x 10.88W x 13.25D pail 5 gallon H x 11.3W x 11.3D 13.8H x 11.3W x 11.3D drum 55 gallon 1 35H x 24.5W x 24.5D 35H x 24.5W x 24.5D This product is Extremely Flammable. Do not apply while equipment is energized. CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com A0910PSS1-1M 2010 CRC Industries, Inc.

12 More Essential Brake Maintenance Products Disc Brake Quiet Forms a water resistant, high temperature film that instantly absorbs vibrations and quiets disc brake noise. For use on the back of non-shimmed disc pads fl. oz. tube oz. aerosol fl. oz. carded De-Squeak Brake Conditioning Treatment Spray on rotors and drums on every brake job to eliminate and prevent brake noise. Metallic formula fills microscopic imperfections on rotor surfaces for smoother braking and aiding in the friction mating/break-in process oz. Synthetic Brake & Caliper Grease Synthetic grease prevents caliper binding, vibration and corrosion. Contains molybdenum, PTFE and graphite for an extreme temperature range of -40 F to 400 F. Use on every brake job! SL3301 SL3302 SL3303 SL oz. tube in display 1/3 oz. carded packets 12 oz. tub 2.5 oz. carded tube BRAKE LUBRICATION AND NOISE SUPPRESSION This product is Extremely Flammable. Do not apply while equipment is energized.

13 Silaramic Brake System Grease Pure silicone dry-film lubricant fortified with a high concentration of a unique ceramic lubricant. Protects brake systems under the most extreme conditions and braking temperatures. Proven to OUTPERFORM ordinary caliper and brake system greases Superior additive package provides lasting protection against friction, wear and corrosion Excellent protection in both wet and dry conditions; will not wash out or melt Ideal for use on ceramic brakes which operate at extremely high temperatures Protects Against Uneven Pad Wear Prevents Rust and Corrosion Reduces Brake Noise and Vibrations Lasts the Life of the Pads and Shoes Compatible with Brake System Rubber and Plastics, Including Nitrile Extreme Temperature Range: -50 F to 3,000 F (-46 C to 1649 C) USAGE: Use on all brake systems and brake components, calipers, caliper hardware, mating surfaces and backing plates, bushings, holes, pins, inserts, anchors, bolts and boots. Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions Tube 5 oz H x 2 W x 2 D 8 H x 6.38 W x 7.63 D Tub 9 oz H x 3.88 W x 3.88 D 5 H x W x 16 D crcindustries.com CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. 2A0214PSS-8M 2014 CRC Industries, Inc.

14 CRC SILARAMIC DRAMATICALLY REDUCES METAL-TO-METAL CONTACT BETWEEN OPPOSING SURFACES AND REDUCES NOISE NON-BOUNDARY LUBRICANT SILARAMIC BRAKE SYSTEM GREASE Hydrodynamic lubrication failure and lack of noise reduction SILARAMIC prevents metal-to-metal contact under conditions of high loads and dampens noise. SAE J2521 TEST RESULTS Test evaluated brake pad wear and braking noise no lubrication versus SILARAMIC applied to all moving hardware and back of brake pads SILARAMIC reduced the High Frequency of Noise in the 14 khz to 17 khz range by 93%. SILARAMIC extended the life of the brake pads. During testing, the inboard brake pad had 49% less wear, and the total reduction in wear of inboard and outboard brake pads was 30%. Test Test Method Typical Results Dropping Point ASTM D-2265 None Flash Point ASTM D F Pour Point ASTM D F Rust Preventative Test ASTM D-1743 Pass Corrosion (50 hrs. 5% Salt Spray) ASTM B-117 No Rust Bleed % ( F) FS Water 100 F, % Loss ASTM D crcindustries.com CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. 2A0214PSS-8M 2014 CRC Industries, Inc.

15 Freeze-Off Super Penetrant The latest in penetrant technology! CRC FREEZE-OFF Super Penetrant is a unique ue formula that uses Freeze-Shock Action to FREEZE, PENETRATE and LOOSEN rusted and corroded mechanisms. Upon contact, FREEZE-OFF immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks the rusted surface, allowing FREEZE-OFF to reach deeper and work more effectively than other penetrants to loosen corroded nuts, bolts, hinges, locks and more! Automobiles Agricultural equipment Household items Plumbing fixtures Freezes and cracks rust for deeper penetration and faster results Dissolves rust, gums and corrosion Lubricating film displaces water and prevents corrosion CRC FREEZE-OFF OUTPERFORMS THE COMPETITION! Distance climbed (cm) in 24 hours Nail Climb Penetration Test (Movement against gravity) FREEZE-OFF WD-40 PB B LASTER LIQUID WRENCH Distance climbed (cm) in 1 minute Boats Watersports equipment Sporting goods Capillary Penetration Test (Movement between 2 surfaces) FREEZE-OFF WD-40 PB B LASTER LIQUID WRENCH WD-40 is a registered trademark of WD-40 Manufacturing company. Liquid Wrench is a registered trademark of Radiator Specialty Company. PB B laster is a registered trademark of The Blaster Chemical Companies, Inc. This product is extremely flammable. Do not apply while equipment is energized. Part No. Package Type Net Wt. Units/Case (Low VOC) Aerosol Can 11.5 oz. 12 Unit Dimensions Case Dimensions 9.25 H x 2.63 W x 2.63 D 9.7 H x 8.3 W x 11.1 D CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A0614PSS-4M 2014 CRC Industries, Inc.

16 Freeze-Off Super Penetrant Display FREE with Purchase of 4 Cases Pre-packed floor display ships complete with 4 cases (48 cans) of CRC FREEZE-OFF Easy to assemble step-by-step, diagrammed instructions included Eye-catching display for increased profits at your store or shop FREEZE-OFF freezes and cracks rust for deeper penetration and faster results Great for freeing frozen or rusted parts on: Automobiles, trucks, motorcycles Agricultural equipment Household items Plumbing fixtures The latest in penetrating technology! Boats Watersports equipment Sporting goods CRC FREEZE-OFF Super Penetrant is a unique formula that uses Freeze-Shock Action to FREEZE, PENETRATE and LOOSEN rusted and corroded mechanisms. Upon contact, FREEZE-OFF immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks the rusted surface, allowing FREEZE-OFF to reach deeper and work more effectively than other penetrants to loosen corroded nuts, bolts, hinges, locks and more! Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc.

17 1-TANK Power Renew for Gasoline Treat your engine to 1-TANK POWER RENEW and get back the power, performance and MPG you ve been missing! to deliver the claims on the bottle. CRC 1-TANK POWER RENEW contains ns the highest concentration of Polyether Amine (PEA) detergency on the market to PROVEN RESULTS after the FIRST use! Robust one-tank cleanup in 100% of tested high-mileage vehicles. 97% Total Power Recovery - PROVEN! 100% Misfire Recovery - PROVEN! 99% Injector Flow Improvement - PROVEN! Average 5.7% MPG Increase - PROVEN! Money Back Guarantee! INTENSIVE Fuel System Cleanup Lasts 4,000 Miles! Why is a Complete Fuel System Cleanup Needed? Fuel quality differs from pump to pump and, over time, contaminants in fuels will cause carbon deposit buildup throughout the fuel system. Carbon deposits harden on intake valves, piston heads, cylinder walls and injectors and lead to decreased MPG, hesitation, stalling, pre-ignition, loss of power and excess exhaust emissions. s. Today s engines are so finely tuned that even microscopic deposit formations can cause performance issues. Single Use Funnel for easy access to CAPLESS GAS TANKS, Ships Complete with Counter Display! Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions crcindustries.com TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc CRC Industries, Inc.

18 Real Tests Real Data Real Results CRC 1-TANK POWER RENEW attacks and removes carbon DEEP CLEANS: Indirect AND Direct Fuel Injectors just one inefficient injector will affect overall engine performance and MPG Intake Valves Combustion Chambers Emissions Control Systems Carburetors Intake Ports Cylinder Heads Piston Tops The ENTIRE fuel system ACTUAL PHOTOS TAKEN FROM TESTED VEHICLES BEFORE AFTER Intake Valves #3 & #4 Piston Tops Combustion Chamber Restores fuel system to LIKE-NEW: Reduces engine knock, ping and run-on Restores lost engine performance Reduces the need for higher octane fuels Intensive deposit cleanup allows for easier cold starts, faster acceleration and better airflow Works in gasoline and ethanol blends Features G2P TECHNOLOGY for cleaner emissions! Magnification of Injector Deposits Clogging Fuel Spray Pattern Fuel Injector Spray Pattern Before After Treats up to 25 Gallons crcindustries.com TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc.

19 1-TANK Power Renew DIESEL FORMULA Treat your diesel engine to 1-TANK POWER RENEW and get back the power, performance and MPG you ve been missing! Most diesel additives on the market need to be used with every fill up in order to deliver the claims on the bottle. After the first use, CRC 1-TANK POWER RENEW delivers a powerful SHOCK to your dirty diesel fuel system resulting in unbeatable one-tank cleanup that lasts up to 4,000 miles! PROVEN RESULTS after the FIRST use! Robust one-tank cleanup in 100% of tested high-mileage vehicles. 100% Power Restoration PROVEN! 99% Injector Flow Improvement PROVEN! 100% Deposit Removal PROVEN! INSIDE the injectors and prevents internal diesel injector deposits (IDID). UNBEATABLE performance in deposit removal! Money Back Guarantee! Single Use Funnel for easy access to CAPLESS GAS TANKS Why is a Complete Fuel System Cleanup Needed? Diesel quality differs from pump to pump and, over time, contaminants in diesel will cause carbon deposit buildup throughout the fuel system. Carbon deposits harden on intake valves, piston heads, cylinder walls and injectors and lead to decreased MPG, hesitation, stalling, pre-ignition, loss of power and excess exhaust emissions. Today s engines are so finely tuned that even microscopic deposit formations can cause performance issues. CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Chemical Solutions to Keep You Moving. 2A0413PSS-5M 2013 CRC Industries, Inc.

20 CRC 1-TANK POWER RENEW attacks and removes carbon deposits from all areas of the fuel system after just one dose proven by exceeding the industry standard XUD-9 and new CEC DW10 engine tests. 4 2 DW10 TEST - TOTAL POWER RESTORATION Base fuel power loss after 30 test cycles After 16 cycles of everyday fuel additives After 1 cycle of CRC 1-TANK POWER RENEW Intensive 1-TANK POWER RENEW Restores fuel system to LIKE-NEW in just ONE TANK! The most powerful diesel system cleaner available. Increases MPG. Restores lost engine performance and boots power. Intensive cleanup for easier cold starts, faster acceleration and better airflow. EXCELLENT cleanup and prevention of sticky injectors frequently found in modern common rail (CRDI) systems. Beyond the nozzle cleaning of conventional products, 1-TANK POWER RENEW cleans INTERNAL deposits (IDID) from today s complex diesel injectors. Works in diesel and biodiesel blends up to B20. Features G2P TECHNOLOGY for cleaner emissions! POWER THAT LASTS! Clean up lasts months! You won t need any other fuel additive again! TEST CYCLE TOTAL power restoration in ONE DW10 test cycle! PEUGEOT XUD-9 TEST - INJECTOR FLOW RESTORATION Average 99% injector flow after ONE cycle of CRC 1-TANK POWER RENEW! Injector 1 Injector 2 Injector 3 Injector 4 AVERAGE After Dirty Up After CRC 1-TANK POWER RENEW 15 fl. oz. Treats up to 30 gallons 32 fl. oz. Treats up to 125 gallons Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions Bottle 15 fl. oz H x 3.69 W X 3.5 D 9.25 H x 7.75 W X 11 D Bottle 32 fl. oz H x 4.5 W X 2.6 D 16.3 H x 9.4 W X 9.0 D Chemical Solutions to Keep You Moving.

21 1-TANK Power Renew COMPLETE DIESEL SYSTEM CLEANUP IN ONE TANK Treat your engine to 1-TANK Power Renew and get back the power, performance and MPG you ve been missing! 3X More Potent than Leading Brands! CRC Diesel 1-TANK POWER RENEW is a concentrated one-tank cleanup that delivers a powerful SHOCK to your dirty fuel system. Made with the maximum available chemistry it s the most powerful diesel fuel system cleaner on the market! Carbon deposits can build up and harden on intake valves, piston heads, cylinder walls and injectors leading to decreased MPG, hesitation, stalling, loss of power and excess exhaust emissions. 1-TANK POWER RENEW features G2P technology for aggressive deposit and emissions cleanup. This breakthrough formula provides MAXIMUM deposit removal and power restoration in just one tank of fuel proven by exceeding the industry standard XUD-9 and new CEC DW10 engine tests. Product Benefits Unparalleled one-tank cleanup Maximum power restoration and deposit control Helps increase MPG Helps your diesel engine run more efficiently Boosts power instantly Cleans injectors and prevents fouling Helps free sticky injectors Reduces exhaust emissions Works great in BIODIESEL blends EXCELLENT cleanup for the sticky injectors frequently found in modern common rail systems Power that LASTS Cleanup lasts months no need for everyday fuel additives! Part No. Package Type Net Wt Units/Case Unit Dimensions Case Dimensions bottle 32 fl. oz H x 4.5W x 2.6D 16.3H x 9.4W x 9.0D HD0711PSS-4M 2011 CRC Industries, Inc.

22 Chain Lube CRC Chain Lube is an advanced, high-performance, synthetic lubricant providing excellent protection for chains, open gears and exposed metal surfaces subject to severe loading. Sprays on like a liquid to penetrate deep; sets up like a grease for outstanding load-bearing protection Advanced anti-wear additives provide excellent protection for metal surfaces subject to severe loading Waterproof formula bonds to chain and wear surfaces Prevents corrosion, reduces load stress and extends chain life by reducing friction and wear that cause metal fatigue Safe on O-rings, X-rings and Z-rings Works excellent in wet conditions Won t fling off or wash out Dries fast; won t attract dirt Extends chain life Low odor Clean appearance Extends Chain Life Use as a lubricant and corrosion inhibitor on all types of drive chains, open gears, hoists, winches, pulleys, fork lifts, rollers, garage doors, bushings, Not for use in CA seals, O-rings, X-rings, Z-rings and wire ropes. Part No. Package Type Net Wt. Units/Case Aerosol Can 10 oz. 12 Unit Dimensions 7.75 H x 2.63 W x 2.63 D Case Dimensions 8.1 H x 8.3 W x 11.1 D This product is extremely flammable. Do not apply while equipment is energized. TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A1014PSS-3M 2014 CRC Industries, Inc.

23 Dermatone Sunscreen Products Extreme temperatures and altitudes paired with sweat, water, dirt or worse can leave skin vulnerable without the right protection. DERMATONE Sunscreen Products are designed for the most rigorous conditions, offering waterproof, sweatproof, non-greasy, UVA, UVB and wind burn protection that endures the outdoors as long as you do. DERMATONE Sunscreen Products are fragrance free and won t degrade fly lines or fishing equipment. Available in a variety of convenient packaging: MK91 NO-TOUCH Sunscreen Stick SPF 50 MK92 Sunscreen Spray SPF 30 MK93 Angler s Sunscreen Tottle Bottle with Carabiner SPF 30 MK94 Angler s Sunscreen Lotion Tube SPF 30 MK90 Medicated Lip Balm SPF 23 Perfect for: Golf Fishing Skiing Snowboarding Boating Swimming Every day use DERMATONE is the official sunscreen of Army Bass Anglers & Artic Row Dermatone is a registered trademark of Beaumont Products, Inc. DERMATONE Medicated Lip Balm is a denser formula that offers superior coverage and longer-lasting protection. Tested in almost every imaginable environment, DERMATONE Medicated Lip Balm provides moisturizing lip protection against the chapping wind, biting cold and blazing sun. SPF 23 and cold sore relief with menthol and phenol. DERMATONE Medicated Lip Balm is available in a.15 oz. stick. Part No. Package Type Net Wt. Units/Case Unit Dimensions Case Dimensions MK90 3pk Carded.15 oz H x 3.5 W x 0.63 D 4.25 H x 4.25 W x 6.25 D MK91 Carded.49 oz H x 2.88 W x 0.75 D 7.25 H x 5.5 W x 5.75 D MK92 Can 1.5 oz H x 1.38 W x 1.38 D 8.75 H x 8 W x 9 D MK93 Tottle Bottle 1.5 oz H x 1.25 W x 1.13 D 4.5 H x 6.25 W x 6.5 D MK94 Tube 2.5 oz H x 1.25 W x 1.25 D 4.25 H x 6.5 W x 6.5 D CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. M0514PSS-2M 2014 CRC Industries, Inc.

24

25

26 STA-PLEX Extreme Pressure Premium Red Grease Infused with extreme pressure, anti-wear and anti-oxidation additives. Excellent for lubricating and protecting equipment from harsh elements, friction and corrosion. Withstands heavy loads for extended periods of time and resists throw-off. Heavy Duty Formula. NLGI Grade 2, aluminum complex grease extends operating service life of equipment. Withstands High Temperature and Pressure. Will not break down, harden or separate. Waterproof. Penetrates to Form a Thick Film. Penetrates deep then quickly thickens to form a long-lasting grease. Excellent as a break-in lubricant for bearings. Use On: Roller Bearings & Chains Fifth Wheels Hitches, Hinges & Latches Cables & Pulleys Overhead Door Tracks Guide Rails Cams & Pistons Heavy Equipment Reduces friction and vibration, while preventing corrosion! Ideal for many automotive, heavy duty, marine, agricultural and industrial applications. Reduces wear, galling and scarring. Red color and smooth texture provide easy visual inspection of film coverage. Part No. Package Type Net Wt. Units/Case SL3192 Aerosol Can 11 oz. 12 Unit Dimensions Case Dimensions 7.75 H x 2.63 W x 2.63 D 8.69 H x 8.44 W x D crcindustries.com TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A0815PSS-4M 2015 CRC Industries, Inc.

27 Di-Electric Grease TECHNICIAN GRADE Grasa Dieléctrica CRC Di-Electric Grease seals, protects & insulates indoor/outdoor electrical connections and bulbs with a quick, no mess application. This innovative Precision Tip Applicator allows for a thin stream of grease to be applied directly on the work area. CRC Di-Electric Grease prevents rust & corrosion by repelling moisture, rust, road salt, dirt and oils that can penetrate and harm electrical connections. Left unprotected, these connections may produce arcing, shorts and electrical fires. Applications include: light bulb sockets, lamps, electrical connections, headlights/ taillights, battery terminals, spark plug boots, trailer connectors, wire connectors, switches, fuses, circuit breakers, and much more! Use CRC Di-Electric Grease at home, in your car, truck or boat and on equipment to ensure maximum performance! Precision Tip Applicator Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Tube.5 oz H X 2.75 W X 1 D 8.13 H X 6 W X 4 D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com A0910PSS4-1M 2011 CRC Industries, Inc.

28 Ice-Off WINDSHIELD SPRAY DE-ICER Desprende el hielo Melts ice, snow and frost from windshields on contact. Thaws frozen locks. Effective to sub-zero temperatures. Helps prevent re-freezing. Harmless to car finish. Use on: Car and truck windows Locks and latches Wipers NEW! PowerJet Spray Nozzle Experience the POWER of CRC ICE-OFF with PowerJet! CRC ICE-OFF features POWERJET technology with a new spray nozzle that produces a burst of product to forcefully break apart ice and defrost windows instantly. The strength behind the POWERJET spray nozzle means faster results, and the ergonomically-designed nozzle is easier to depress and control, giving a quick shot of ICE-OFF right where it s needed. Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Can 12 oz H X 2.6 W X 2.6 D 8.1 H X 8.3 W X 11.1 D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. #A0513PSS-5M 2013 CRC Industries, Inc.

29 QC-82 TM Pro-Strength Degreaser CRC QC-82 Pro-Strength Degreaser quickly and safely removes grease, grime, oil, rubber marks and other contaminants from all types of hard surfaces. QC-82 Pro-Strength Degreaser cleans instantly, dries fast and leaves no residue. Quickly Breaks Down and Removes Grease, Oil, Tar, Rubber Streaks and Road Grime Safe for Clearcoats and Vinyl Leaves No Residue Spray On-Wipe Off No Rinsing Necessary Use On: Automotive Parts & Exteriors Motorsports Vehicles Maintenance Equipment Heavy Machinery Home & Garage Chrome Stainless Steel Metallic Parts Safe on painted surfaces and plastics! CRC QC-82 Pro-Strength Degreaser is a foaming water-based degreaser developed without free alkali, ammonia or caustics resulting in a mild ph, so it s safe on painted surfaces, plastics, vinyl and rubber. Although QC-82 has a mild ph, it s strong enough to breakdown grease, road grime, oil, rubber marks and other oil-based contaminants. Part No. Package Type Net Wt. Units/Case Can 15 oz. 12 Unit Dimensions Case Dimensions 9.25 H x 2.63 W x 2.63 D 9.7 H x 8.3 W x 11.1 D crcindustries.com TM CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC, K&W, Sta-Lube, Marykate and products denoted with and are trademarks of CRC Industries, Inc. A0315PSS-3M 2015 CRC Industries, Inc.

30 Inner Slide Lube EXTENDS EQUIPMENT LIFE CRC Inner Slide Lube lubricates and increases slide motion, extending forklift equipment life. Fortified with molybdenum disulfide and extreme pressure additives to resist pound-out and prevent destructive metal-to-metal contact. Designed for forklift inner slide rails. Protects against rust and corrosion. Benefits: Molybdenum disulfide fortified to reduce friction and wear Extreme pressure additives resist pound-out under severe lubrication requirements Adheres to metal surfaces Prevents destructive metal-to-metal contact Eliminates galling Technical Data: Appearance/Odor: Black color, Petroleum odor Physical State: Aerosol Flash Point: 20ºF Boiling Point: ºF Specific Gravity/Density: 1.17 Solubility: Not soluble in water Vapor Denisty: BT Vapor Pressure: 45.0 mmhg Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Can 10.5 oz "H x 2.63"W x 2.63"D 8.1"H x 8.3"W x 11.1"D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. A0911PSS2-1M 2011 CRC Industries, Inc.

31 Motor Treatment CARBON CLEAN-OUT INTERNAL ENGINE AND CRANKCASE CLEANER Tratamiento para motor CARBON CLEAN-OUT CRC MOTOR TREATMENT cleans and lubricates internal fuel and oil systems for a smoother running engine, increased MPG, restored power and reduced emissions. Carbon, a byproduct of combustion, is typically expelled through the exhaust system but some can collect on built-up gum and varnish residue in your engine. Carbon deposits can harden on intake valves, piston heads, cylinder walls and injectors leading to decreased MPG, hesitation, detonation (knock), pre-ignition, stalling, loss of power and excess emissions. Carbon deposits in your engine are a serious problem. ADD TO FUEL CRC MOTOR TREATMENT cleans fuel injectors, carburetor jets, intake valves & pistons as you drive. Lubricates upper cylinders, cures hesitation and pings, restores power and pick-up, removes moisture and stabilizes fuel. Use for engine storage. Works in gasoline, diesel and ethanol fuels. For a more aggressive cleaning, CRC MOTOR TREATMENT can be added directly into the combustion chamber through a vacuum line. SYN-GO Technology leaves behind a synthetic lubricant for added protection against the drying effect of ethanol in fuels and lubricates the upper cylinders. ADD TO OIL Over time, prolonged idle, stop and go driving, dirt, moisture and extreme operating temperatures can cause sludge build-up in motor oil resulting in power and performance loss. CRC MOTOR TREATMENT liquefies built-up gum and varnish and releases carbon deposits cleaning sticky valve lifters, piston rings and PCV systems slowly, while you drive, to prevent chunks of sludge from clogging oil flow. Removes moisture from oil. Use on: cars trucks boats all 2-cycle, motorcycles dirt bikes RVs 4-cycle and lawn equipment agricultural equipment ATVs rotary engines Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Can 16 fl. oz H X 2.63 W X 2.63 W 8.6 H X 11.3 W X 8.4 W CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com #A0311PSS-5M 2011 CRC Industries, Inc.

32 VisiClear Display Cleaner & ELECTRONIC SCREEN CLEANER CRC VisiClear Display Cleaner & Electronic Screen Cleaner safely cleans TFT, LCD, Plasma, CRT and Touch Screens. This unique foam cleaner clings, won t drip, and is alcohol and ammonia free. Streak-free formula leaves no residue and dries fast. Product may be applied with a clean microfiber cloth or sprayed directly onto the display surface. Key Benefits Cleans without streaking surface Clings to surface, no drips, no runs Leaves no residue behind on screen Dries fast Alcohol & Ammonia Free (No solvents) Will not damage screen protective coatings Use on: Plasma displays / LCD displays Touch screen displays Laptops and notebook computers Camcorders Cell phones and PDAs Copy machines GPS navigation systems CRT monitors Removes: Fingerprints Nicotine film Dust and dirt Part No. Package Type Net Contents Units/Case Unit Dimensions Can 6.9 oz "H x 2.00"W x 2.00"D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. A0911PSS1-5M 2011 CRC Industries, Inc.

33 Top Engine Cleaner ENGINE TUNE-UP & CARBON CLEAN OUT Afinador y descarbonizador de motores Problem: Engine knock (detonation) Rough-idle Loss of power Pre-ignition stalling Reduced engine performance Excessive carbon build-up Solution: CRC Top Engine Cleaner Carbon, a byproduct of combustion, is typically expelled through the exhaust system but some can collect on built-up gum and varnish residue in your engine. Carbon deposits can harden on intake valves, piston heads, cylinder walls and injectors. Carbon deposits left untreated in your engine are potentially a serious problem, leading to reduced engine performance, increased fuel consumption, rough idling and engine knocking, pinging or run-on. CRC TOP ENGINE CLEANER cleans and lubricates internal engine systems for improved engine performance, solves many rough-idle problems and increases MPG, restores power and reduces emissions. Spray into Throttle Body Ensure vehicle is well ventilated. Exhaust will be extreme as internal motor is being cleaned. Do not treat vehicle in enclosed garage. With vehicle in park, run engine until normal operating temperature is reached. Idle engine. Locate throttle body and insert extension tube about 2 inches past the throttle plate. Increase engine idle to about 2,000 RPM and spray CRC Top Engine Cleaner directly into the Throttle Body until entire can is dispensed (about 2 to 3 minutes). Turn engine off and allow to heat-soak for minutes. Restart engine and drive until white smoke is gone. For optimum results, changing the oil and oil filter after running a top end cleaner through your engine is recommended. To prevent future carbon build-up and improve engine efficiency, use CRC Top Engine Cleaner every 5,000 miles. Use on: cars trucks boats ATVs RVs motorcycles dirt bikes lawn equipment agricultural equipment all 2-cycle, 4-cycle and rotary engines 16" Extension Tube Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Aerosol Can 12 fl. oz H X 2.63 W X 2.63 W 8.6 H X 11.3 W X 8.4 W CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com #A0312PSS-5M 2012 CRC Industries, Inc.

34 CRC Magic Oil Lock Lube & De-icer LONG LASTING GRAPHITE FORMULA FREES SEIZED & FROZEN LOCKS CRC MAGIC OIL LOCK LUBE & DE-ICER frees frozen or seized locks and mechanisms and loosens rusted parts. Small enough to fit anywhere from glove boxes and desk drawers to toolboxes. Key Benefits Provides long lasting lubrication Lubricates lock cylinder Functional over a wide temperature range Reduces friction and wear No mess application Quick drying Frees frozen locks Frees seized or stiff mechanisms Excellent water resistance Lubricates without leaving a sticky residue Safe on all metal surfaces, does not stain Part No. Package Type Net Contents Units/Case Units Inner Pack Unit Dimensions Case Dimensions Can 0.4 oz "H X 0.875"W X 3.25"D 3.5"H X 3.5"W X 5.38"D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. A0911PSS3-3M 2011 CRC Industries, Inc.

35

36 5-Shelf Floor Display RETAIL MERCHANDISING UNIT Easy to assemble, customizable floor display will maximize your floor space, attract attention and increase product sales. You choose the display header graphics and the products you want to feature! Eye-catching floor display with full-color graphics gives a high-quality appearance Open shelving allows products to be visible from all sides Durable and sturdy PVC construction will stand up to store traffic and outlast traditional cardboard displays Small footprint conserves valuable floor space Assembled display dimensions: 16" width x 60" height x 14" depth Header dimensions: 15.25" width x 11.75" height #05700 CUSTOMIZABLE FLOOR DISPLAY Each shelf will accommodate these standard CRC product containers: 20 aerosol cans 20 small additive bottles (12 fl oz) 12 large additive bottles (32 fl oz) 20 PhaseGuard4 8floz bottles 12 PhaseGuard4 16 fl oz bottles 9 PhaseGuard4 32 fl oz bottles 12 round Marykate quart bottles 9 Marykate or HydroForce trigger spray bottles 24 Sta-Lube grease cartridges 9 Sta-Lube grease cans 4 gallon containers (bottom shelf only) PG0810-DISP A0810-DISP MAR0810-DISP HD0810-DISP 4 Header Options: PhaseGuard4 Automotive Products Marine Products Heavy Duty Products Part No. Package Type Unit Dimensions Case Dimensions floor display 60 H x 16 W x 14 D 11.8 H x 14.4 W x 16.1 D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com A0910PSS8-1M 2010 CRC Industries, Inc.

37 PhaseGuard4 Stor & GoTM ETHANOL FUEL TREATMENT CORROSION PROTECTION FOR SMALL ENGINES Tratamiento para combustible etanol Protección contra corrosión para motores pequeños CRC PHASEGUARD4 STOR & GO Small Engine Formula provides the maximum protection available to prevent harmful phase separation of fuel that can lead to equipment failure. It protects tools and equipment from damage caused by ethanol fuel, cleans fuel system components, stabilizes fuel and restores power. PHASEGUARD4 STOR & GO is absolutely essential for operation and storage of lawn mowers, snowblowers, chain saws, roto tillers, leaf blowers, garden tillers, lawn tractors, edgers, trimmers, brushcutters, chippers, augers, saws, atvs, snowmobiles, motorcycles, scooters and more. PHASEGUARD4 STOR & GO comes packaged with 50 1 fl oz units per convenient display carton for retail placement at the sales counter. This product is a great consumer impulse buy and something virtually every homeowner needs! 1 fl oz STOR & GO packet treats up to 2.5 gallons in-use or for storage. May be used in all gas or gas/oil blends. (Not for use in diesel fuel.) Counter Display Carton Holds 50 STOR & GO Packets for Easy Retail Sale PHASEGUARD4 STOR & GO - SMALL ENGINE FORMULA Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Packet 50 pack - 1 fl oz D X 7.3 W X 6.5 H 11.8 D X 14.8 W X 6.6 H PHASEGUARD4 ETHANOL FUEL TREATMENT - ORIGINAL FORMULA Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions Dosage bottle 8 fl oz L X 1.8 W X 5.6 H 11 L X 8.3 W X 6.1 H Dosage bottle 16 fl oz L X 2.5 W X 10.5 H 14.2 L X 8.8 W X 11.2 H Dosage bottle 32 fl oz L X 4.3 W X 10.5 H 14.4 L X 8.8 W X 11.2 H CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com A0910PSS3-1M 2010 CRC Industries, Inc.

38 CRC Industries Product Technical Brief CHOOSING THE RIGHT PRODUCT... CRC Industries, Inc. recommends using CRC Parts Washer Solvent, part number in your parts washer system to quickly and effectively clean parts. CRC also carries 1 gallon and 5 gallon bulk package Brakleen for cold parts dip cleaning. Here are more details about these products Parts Washer Solvent CLEANER/DEGREASER CRC Parts Washer Solvent is a superior immersion parts cleaner that quickly and effectively removes grease, oil, dirt and other contaminants from metal and non-metal parts. This Zero VOC formula contains no chlorinated solvents and will not harm working parts. Specifically formulated as a low vapor pressure solvent, this cleaner meets VOC regulations related to parts washer solvents. Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions pail 5 gallon H X W X D H X W X D Brakleen Non-Chlorinated BRAKE PARTS CLEANER CRC Brakleen Non-Chlorinated Brake Parts Cleaner quickly removes brake dust, brake fluid, grease and other contaminants from all types of brake systems. Use on all related brake parts including rotors, cylinders, drums, linings brake shoes, calipers, clutch discs and disc brake pads. Safe for ABS, disc and drum brakes. ATTENTION: This product is recommended for hand cleaning or as a dip for parts listed above. Part No. Package Type Net Contents Units/Case Unit Dimensions Case Dimensions pail 5 gallon H X W X D H X W X D CRC Industries is a worldwide leader in the production of specialty chemicals for the DIY and maintenance professional, serving the automotive, marine, hardware, electrical, industrial, and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development, and production. CRC, Sta-Lube and products denoted with and are trademarks of CRC Industries, Inc. Proven. Global. Solutions. com A0910PSS7-1M 2010 CRC Industries, Inc.