Fueltec Models 955SS Mobile Fuel Tank Cleaning System
|
|
- Charlene Shields
- 5 years ago
- Views:
Transcription
1 Fueltec Models 955SS Mobile Fuel Tank Cleaning System 2017 Fueltec 955SS Fueltec Systems LLC
2 WARNING This product operates in the highly combustible atmosphere of a diesel or gasoline storage tank. FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY PRECAUTIONS COULD CAUSE DAMAGE TO PROPERTY, ENVIRONMENT, RESULTING IN SERIOUS INJURY OR DEATH. 1. This fuel polishing system should NEVER BE OPERATED inside a truck cargo body, enclosed trailer, or within fifty (50) feet of an operating or hot engine, motor or fuel dispenser. 2. All work must comply with the latest issue of the National Electrical Code (NFPA 70), the Code for Motor Fuel Dispensing Facilities and Repair Garages (NFPA 30A), and any European, national, state, and local code requirements that apply. 3. When servicing unit, use non-sparking tools and use caution when removing or installing equipment to avoid generating a spark. 4. To protect yourself and others from serious injury, death, or substantial property damage, carefully read and follow all warnings and instructions in this manual. Warnings and Instructions This section introduces the hazards and safety precautions associated with operating, maintaining or servicing this product. Before performing any task on this product, read this safety information and the applicable sections in this manual, where additional hazards and safety precautions for your task will be found. Fire, explosion, or pressure release could occur and cause damage to property, environment, resulting in serious injury or death, if these safe service procedures are not followed. PRELIMINARY PRECAUTIONS You are working in a potentially dangerous environment of flammable fuels, vapors, and fluid pressures. Only trained or authorized individuals knowledgeable in the related procedures should operate, inspect, maintain or service this equipment. Read the Manual Read, understand and follow this manual and any other labels or related materials supplied with this equipment. If you do not understand a procedure, call to locate a qualified technician. It is imperative to your safety and the safety of others to understand the procedures before beginning work. Make sure your employees and any service contractors read and follow the instructions. Follow the Regulations Applicable information is available in National Fire Protection Association (NFPA) 30A; Code for Motor Field Dispensing Facilities and Repair Garages, NFPA 70; National Electrical Code (NEC), Occupational Safety and Hazard Association (OSHA) regulations and federal, state, and local codes. All these regulations must be followed. Failure to operate, inspect, maintain or service this equipment in accordance with these codes, regulations and standards may lead to legal citations with penalties or affect the safe use and operation of the equipment. OSHA fall protection rules apply when working on above ground fuel storage tanks. 2
3 Prevent Explosions and Fires Fuels and their vapors will explode or burn, if ignited. Spilled or leaking fuels and used filters cause vapors. All used filters should be promptly placed in an approved safety container until disposed of. Even filling air compressor fuel tanks will cause potentially dangerous vapors in the vicinity of the work area. Working Alone It is highly recommended that someone who is capable of rendering first aid be present during operation. Familiarize yourself with Cardiopulmonary Resuscitation (CPR) methods, while working around fuel vapors. This information is available from the American Red Cross. Always advise other personnel about where you will be working, and caution them not to activate power tools or engines while you are working with fuel filtration equipment. Use the OSHA Lockout/Tagout procedures. If you are not familiar with this requirement, refer to OSHA documentation. Hazardous Materials Some materials may present a health hazard if not handled correctly. Ensure that you clean hands after handling equipment. Do not place any equipment in the mouth. FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY PRECAUTIONS COULD RESULT IN PROPERTY DAMAGE, INJURY OR DEATH. FIRE HAZARD! Do NOT use power tools (Class I Division I and Class I Division II) during the operation or maintenance of equipment. Sparking could ignite fuel or vapors, resulting in fire. CHEMICAL EXPOSURE HAZARD! Wear appropriate safety equipment during operation or maintenance of equipment. Avoid exposure to fuel and vapors. Prolonged exposure to fuel may cause severe skin irritations and possible burns. REQUIREMENTS FOR USE Fueltec fuel polishing and tank cleaning systems are designed for use only by trained personal. Free training is available at Fueltec s factory located in Granite Falls, NC USA. Call 1- (828) The operation of Fueltec s systems must be consistent with NFPA Code 30A, OSHA regulations, and federal, state and local fire codes, and other applicable local regulations. OPERATING PRECAUTIONS NO SMOKING. Extinguish all open flames and pilot lights, such as on RV appliances. TURN OFF cell phones and other electronic devices to prevent sparks which could cause an explosion or fire. PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating or maintaining the system. Do not operate or maintain the system while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating or maintaining the system may result in serious personal injury or death. Dress properly while operating this system. Do not expose bare skin or eyes to fuels. Prolonged contact with fuel can damage the skin. Use safety apparel and equipment. Use safety goggles or safety glasses. Also use non-skid safety shoes, hardhat, gloves, and fall protection when appropriate. 3
4 SAVE THESE INSTRUCTIONS WORK AREA Mark work area with orange colored safety cones placed in a radius of at least forty(40 ) feet from fuel tank cleaning equipment, fuel containers, and fuel tank openings. Place Flammable Liquid Warning Signs within work area Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. Keep children and bystanders away while operating this system. Distractions can cause you to lose control, so visitors should remain at a safe distance of at least forty (40 ) feet from the work area. Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work area, particularly those hazards below the work surface hidden from the operator s view that may be unintentionally contacted and may cause personal harm or property damage. Be alert of your surroundings. Using your system in confined work areas may put you dangerously close to unsafe conditions. Keep one or more Fire Extinguishers U.L. rated 10A-80B:C in the work area. Keep Air Compressor at least 40 feet (40 ) feet from fuel tank cleaning equipment, fuel containers, and fuel tank openings. 40 ft. 4
5 Today s diesel engines require aircraft quality fuel. Not to many years ago diesel engines were quite simple, not too efficient, smoked, and burned high sulfur fuel (as much as 5,000 parts per million). The older diesel injection systems only use about 1 2 the fuel pressure modern engines do, and older injectors send the fuel through much larger passages. If there was a little moisture in the storage tank, the high sulfur content killed most of the filter clogging bacteria and fungi. Today s diesel fuel is ultra-low sulfur (15 parts per million) which allows bacteria and fungi to grow rapidly if any moisture is in the fuel storage tank. Today s diesel engines use high pressure, 27,000 to 35,000 psi fuel injectors with tiny fuel passages which are easily clogged with dirty fuel and damaged by water. The days of using grandpa s old style boat or tractor filters on your diesel fuel tank are over. The old style filters and water separators that remove 75% to 99% of the contamination are not good enough for today s diesel engines. Magnets and filter-less devices won't clean fuel to ISO 18/16/13 or remove water to 0.05% Both Caterpillar and Cummins call for fuel to meet or exceed ISO cleanliness levels of 18/16/13 with a water content of less than 0.05% Fueltec s systems meet or exceed these ISO levels with a one micron primary filter, micro-glass filter/coalescer, and Teflon coated stainless steel hydrophobic water separator. Fueltec uses this type of system on aircraft Jet-A or JP-8 Jet fuel. 5
6 Removing Water Build up and Contamination from Diesel Fuel and Heating Oil Storage Tanks with Fueltec s Model 955SS Fuel Polishing System 955SS Mobile Fuel Tank De-Watering and Filtration System In operation the system pulls fluid from the fuel tank bottom by a vacuum created by the fuel pump. A bag type filter is first to remove sludge and solid contaminates from the tank bottom fluid which may also contain water. The fuel/water mix leaves the fuel pump under pressure ( do not exceed 60 PSI) and is forced through a filter/ coalescer where the tiny water droplets are made larger and separate from the fuel. The Teflon separator prevents the water droplets from traveling with the fuel. The water falls to the bottom of the water trap. A clear sight tube allows you to see the level of the water that has been separated. With the system running; you can open a valve and send the water to a waste container and the clean fuel back to the fuel storage tank. The water level in the sight tube stops rising when all of the water has been vacuumed and separated from the fuel storage tank. Tank Cleaning is Done With No Loss of Product A static ground is provided to dissipate static electric build up while pumping fuel. Five (5) micron bag filters should be used with diesel fuels 6
7 Removing Water Build up and contamination from gasoline and ethanol blended fuel storage tanks with Fueltec s Model 955SS Fuel Polishing System 955SS Mobile Fuel Tank De-Watering and Filtration System In operation the system pulls fluid from the fuel tank bottom by a vacuum created by the fuel pump. A bag type filter is first to remove sludge and solid contaminates from the tank bottom fluid which may also contain water. The fuel/water mix leaves the fuel pump under pressure ( do not exceed 60 PSI) and is forced through a filter/ coalescer where the tiny water droplets are made larger and separate from the fuel. The Teflon separator prevents the water droplets from traveling with the fuel. The water falls to the bottom of the water trap. A clear sight tube allows you to see the level of the water that has been separated. With the system running; you can open a valve and send the water to a waste container and the clean fuel back to the fuel storage tank. The water level in the sight tube stops rising when all of the water has been vacuumed and separated from the fuel storage tank. Tank Cleaning is Done With No Loss of Product A static ground is provided to dissipate static electric build up while pumping fuel. One (1) micron bag filters should be used with Gasoline & ethanol blended fuels 7
8 Removing Water Build up and Contamination from Jet A and JP-8 Fuel Storage Tanks with Fueltec s Model 955SS Fuel Polishing System This system is designed for cleaning fuel storage tanks and is not certified to be used for dispensing fuel into aircraft. 955SS Mobile Fuel Tank De-Watering and Filtration System In operation the system pulls fluid from the fuel tank bottom by a vacuum created by the fuel pump. A bag type filter is first to remove sludge and solid contaminates from the tank bottom fluid which may also contain water. The fuel/water mix leaves the fuel pump under pressure ( do not exceed 60 PSI) and is forced through a filter/ coalescer where the tiny water droplets are made larger and separate from the fuel. The Teflon separator prevents the water droplets from traveling with the fuel. The water falls to the bottom of the water trap. A clear sight tube allows you to see the level of the water that has been separated. With the system running; you can open a valve and send the water to a waste container and the clean fuel back to the fuel storage tank. The water level in the sight tube stops rising when all of the water has been vacuumed and separated from the fuel storage tank. Tank Cleaning is Done With No Loss of Product A static ground is provided to dissipate static electric build up while pumping fuel. One (1) micron bag filters should be used with Jet A & JP-8 Fuels CMH HELI-SKIING Canadian Mountain Holidays (CMH), a helicopter skiing company in western Canada owns and maintains thirty 50,000L fuel tanks which require annual cleaning. With Fuel Tec s 955SS mobile fuel polishing system, removing water build up at the bottom of the tank has never been easier. The 955SS removes the water and sediment with virtually no fuel waste. This saves CMH thousands of dollars each year in waste fuel removal costs. If you are in the business of fuel tank cleaning or fuel maintenance, I highly recommend this unit. Brett Lawrence Fuel Systems Supervisor Canadian Mountain Holidays 8
9 WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury, or death. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. FuelTec Systems cannot be responsible for issues arising from modification. We strongly recommend this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted FuelTec Systems to determine if it can or should be performed on the product. TECHNICAL SPECIFICATIONS Model FT 955SS Chassis Construction Steel and Aluminum Brite Tread Filter Housings Stainless Steel Maximum lift 22 feet Working pressure fuel max. 60 PSI Pump rated flow rate range 0-2,100 Gallons per hour * Water Trap two (2) Gallons US Compressed Air Required: 60 psi at CFM Width: 32 Depth: 47 Overall Height 60 Pump 1 Air Operated Diaphragm Inlets/Outlets 1 Cam-Loc w/ Ball Valves Hose Supply& Return 1 X 12 each Vacuum Gauge 2 liquid filled Sludge Filters 24 Fueltec Bag Water Coalescer/Separator Fueltec Water Separator Fueltec Air Regulator 3/8 * Flow rates may vary with compressed air supply, filter type and condition, length and size of hoses, and size and shape of fluid pickup and return tubes. 9
10 Pneumatic Tank Cleaning Systems Common Replacement Filters, Hose, and Seals 2017 Fueltec 955SS Model 955SS comes with 2 ea. fuel hoses 1 x 12 with cam and groove fittings. This system requires a 25 CFM air at 40 PSI compressor and operates Use one micron filter bags for jet fuel and gasoline, one or five micron filter bags for diesel PART # DESCRIPTION HOUSING TOP SEAL BUNA (STANDARD) TOP SEALS PACK OF 6 EA. FILTER BAG 1MICRON X 24 FILTER BAG 1 MICRON X 24 PACK OF 6 EA. FILTER BAG 1 MICRON X 24 PACK OF 25 EA. FILTER BAG 1 MICRON X 24 PACK OF 100 EA. FILTER BAG 5 MICRON X 24 FILTER BAG 5 MICRON X 24 PACK OF 6 EA. FILTER BAG 5 MICRON X 24 PACK OF 25 EA. FILTER BAG 5 MICRON X 24 PACK OF 100 EA COALESCER/FILTER FOR 955SS 20 INCH COALESCER/FILTER FOR 955SS 20 INCH PACK OF 12 EA MANIFOLD M-2 FOR ACCESS TO GENERATOR 2 IN. TANK OPENING PUMP DIAPHRAGM VITON FOR 955SS FUEL HOSE 1 INCH X 12 FEET FUEL HOSE 1 INCH X 25 FEET WITH CAM-LOCK ENDS Fueltec Systems PO Box 487, Granite Falls, NC LENZ
11 FEATURES Stainless steel filter housings to resist the acids found in today's diesel and ethanol blended gasoline. Filtration down to one micron, water removal to less than 100 parts per million. Exceeds ISO particle code of 18/16/13 to meet engine manufacturers clean fuel requirements. Air operated diaphragm fuel pump intrinsically safe for all fuels. INTENDED USE AND OPERATING PRINCIPAL This System is designed to be used with diesel fuel, gasoline, jet fuel, heating oil, kerosene, and ethanol blended fuels for removing water and other contaminants from fuel tanks. The System has three modes of operation: 1. Bulk Fluid Transfer without Water Separation or Filtration is used when several inches of water are measured on the tank bottom. This water can be pumped directly into a container without wasting filters or having to empty the Separator water trap. 2. Fuel/Water Separation and Filtration mode is used to separate the remaining water and filter the fuel after the bulk water has been removed. 3. Filtration without Water Separation can be done at a higher flow rate than with water separation. Generally used to remove particulate in suspension after water separation. 955SS Mobile Fuel Tank De-Watering and Filtration System In operation the system pulls fluid from the fuel tank bottom by a vacuum created by the fuel pump. A bag type filter is first to remove sludge and solid contaminates from the tank bottom fluid which may also contain water. The fuel/water mix leaves the fuel pump under pressure ( do not exceed 40 PSI) and is forced through a filter/ coalescer where the tiny water droplets are made larger and separate from the fuel. The Teflon separator prevents the water droplets from traveling with the fuel. The water falls to the bottom of the water trap. A clear sight tube allows you to see the level of the water that has been separated. With the system running; you can open a valve and send the water to a waste container and the clean fuel back to the fuel storage tank. The water level in the sight tube stops rising when all of the water has been vacuumed and separated from the fuel storage tank. Tank Cleaning is Done With No Loss of Product 11
12 FUEL TANK SAFETY Purge fuel tank (fill airspace inside the tank between any fuel and the top of the tank) with argon or CO2 prior to drilling or sawing holes that penetrate the tank to minimize the risk of explosion. Maintain a purged condition while installing fittings on a fuel tank. STATIC GROUND Always attach a static discharge cable from the Fueltec System to the fuel tank being serviced. The flowing movement of flammable liquids like gasoline inside a pipe can build up static electricity. Non-polar liquids such as gasoline, diesel, kerosene and light crude oils exhibit significant ability for charge accumulation and charge retention during high velocity flow. Static electricity can discharge into a fuel vapor. When the electrostatic discharge energy is high enough, it can ignite a fuel vapor and air mixture. Different fuels have different flammable limits and require different levels of electrostatic discharge energy to ignite. Electrostatic discharge while fueling with gasoline is a present danger at gas stations. Fires have also been started at airports while refueling aircraft with kerosene. The use of a static discharge cable can help to prevent or safely dissipate the build up of static electricity. 12
13 Primary Filter Inlet valve 1. Stainless Steel Water Separator Housing Filtered fuel return to tank port 2. Stainless Steel Sludge Filter Housing Fuel Pump Air Valve 7. Separated water Sight Tube Drip Pan Locking Casters Contaminant Drain Valve 4. Air Bleed Valve 5. Pressure Gauge When gauge reads 20 PSI replace coalescer cartridge Fuel Transfer Outlet 3. Vacuum Gauge Sludge Filter Inlet Port 1. Pressure Gauge 13
14 Photo above shows selector valve in the filter only position. The fluid will flow from the tank bottom, through the primary bag filter, then out the bottom port, by-passing the water separator housing. Use this position when removing particulates from the fuel after all water has been removed from the storage tank. Or for removing bulk water from the fuel storage tank bottom. Photo above shows the selector valve in the separate water from fuel position. The will flow from the tank bottom, through the primary bag filter, then through the coalescer cartridge where the tiny water droplets are separated from the fuel. The clean dry fuel exits the top port on the separator housing and the separated water is trapped in the housing bottom where it can be drained without stopping the system. Fluid in Fluid in Filtered dry fuel out top right discharge port Filtered fluid out bottom right discharge port 14
15 Typical Fuel Tank De-Watering and Filtration: Underground and Aboveground Fuel Storage Tanks: Remove cap or fitting to access tank bottom. Test for high (2 +) bulk water level with a Fueltec Sampler. Set the System selector valve to filter only position to remove all but the last inch of bulk water from the tank. Attach a fluid pickup tube to the systems supply hose and lower to the tank bottom through a tank opening. Connect supply hose to system s primary bag filter housing. Connect return hose to system s bottom right discharge port and a waste container. Pump out bulk water. Set the System selector valve to Separate Water position. Operate the system and observe the separated water level in the water trap. Empty the water trap as the system is running; stop operation when water is no longer accumulating in the trap. If suspended particulates are observed in the sight tube after water has been removed; Set the System Mode to Filter only. Use 1 or 5 micron filters for diesel and 1 micron filters for gasoline, jet fuel, & ethanol blends. Operate system until the fuel is clear. 15
16 Air Bleed Valve 6. Swing Bolt Eye Nut (hand tighten) Primary Filter inlet valve 1. Sludge Filter Cover Vacuum Gauge When gauge reads 15 Hg. Replace bag filter Sludge Filter inlet port 1. WARNING: Fuel Pump Air Valve Set air pressure regulator not to exceed forty (40) psi at any time 16
17 Supply & Return Hoses The Systems come with two (2) 1 X 12 hoses equipped with cam lock fittings and adaptors. Fabricate suction tubes of the proper length to reach the tank bottom you are servicing. Suction and return tubes can be fabricated from PVC, Aluminum, Stainless Steel, or iron pipe. Flexible suction tubes can be made from polyurethane tube, nylon 11 tube, and PTFE (Teflon) tube. Optional return manifolds are available from Fueltec. Return Manifold for 2 tank opening is shown with pickup tube inserted. Pickup tube draws fluid from the tank bottom. Clean dry fuel is returned to tank through manifold ports. 17
18 BAG FILTER REPLACEMENT 1. Open air bleed valve 6., close primary filter inlet valve 1. (page 6) 2. Run fuel pump for 30 seconds to drain housing. 3. Loosen swing bolt eye nuts and remove housing cover. 4. Remove bag filter hold down. 5. Remove and dispose soiled filter bag after each use. 6. Insert new filter bag into housing and seat bag flange on housing baffle plate. 7. Insert filter hold down. 8. Install filter housing cover and swing bolts into slots in cover. 9. Tighten swing bolt eye nuts hand tight then 1/4 turn more. (do not over tighten) 13. Close air bleed valve 6. and open primary filter inlet valve 1. (page 6) 14. Resume operation. FILTER BAG SELECTION Gasoline: 1 micron bag Kerosene: 1 micron to 5 micron bag Jet Fuel: 1 micron to 5 micron bag No. 2 Diesel: 5 micron to 5 micron bag Note: Fuel tanks with heavy sludge build up will require multiple bag changes. Do not operate this system without filter bags installed. 18
19 Coalescer and Separator Replacement 1. Stop Fuel Pump 2. Loosen swing bolts and remove housing cover. 3. Remove 3/8 separator nut 4. Lift out Water Separator with filter/coalescer inside. 5. Pull filter/coalescer from inside of the separator cartridge and discard. 6. Apply Vaseline to new coalescer o-rings and insert coalescer into separator. 7. Insert new coalescer element (CF-20), push end over the boss inside of the separator element. 8. When turned over the coalescer element should stay inside separator to aid in alignment when installing filter intohousing. 9. Install the two elements into housing until 3/8 bolt protrudes from top of separator. 10. Install 3/8 O-Ring, washer and nut tighten to 5ft/lbs 11. Before reinstalling cover verify that O-ring seal (# ) is seated properly and not damaged. 12. Install cover, tighten eye nuts evenly by hand. 13. Resume operation, check for any leaks. 19
20 Maximum Water Separation & Filtering Connect Return to Tank Hose to Port 2. Connect Pickup Tube Hose to Filter Port 1. Open Valves 1. & 2. Note 3-Way Valve position Fast Filter Without Water Separation Connect Pickup Tube Hose to Filter Port 1. Connect Return Hose to Port 4. Open Valves 1. & 3. Close Valve 2. Fuel will flow through primary filter only. Note 3-Way Valve positions Caution: Do not use this option if water is found in the fuel tank as the fuel and water may become emulsified beyond separation. 20
21 First Start Up of the System to Service a Fuel Tank 1. Close air bleed valve 6. page 6, contaminant drain valve 8. pages 7, and fuel pump valve Install Bag Filter as shown on page Prime pump by filling sludge filter housing with one gallon of product. 4. Attach 40 psi air supply from outside source to fuel pump valve Attach fluid supply hose to sludge filter port Attach fluid return hose to return flow control valve port Attach pickup supply & return tubes & manifold to hoses. 8. Adjust air supply regulator to a maximum 40 psi. 9. Attach the Static Ground to the tank being serviced with the spring clip. 10. Insert Manifold into fuel storage tank opening and connect hose. 11. Insert fluid supply pickup tube into the tank manifold to a point just under the fluid level until the fuel pump is primed. 12. Open air supply valve 7. & adjust flow rate 13. Open Supply Port Valve 1. full open. 14. Open Return Valve 2. Pump will start to cycle. 15. Fluid should appear in sight tube within three minutes. 16. Cycle pump until the system is full of clean fuel. 17. Close supply port valve 1. until vacuum gauge reads 12Hg. Then open supply port valve 1. full open. 18. Move the fluid pickup tube to the lowest portion of the fuel tank to remove the contaminates only after steps 1 thru 16 have been completed. 19. Watch sight tube for the presents of water. (water on bottom fuel on top) 20. When water level reaches six (12 ) inches; open contaminant drain valve 8. and place drain hose into waste container. 21. Control water level in sight tube with drain valve 8. & return to tank valve 2. (This allows you to send the separated water to a waste container and the cleaned fuel back to the tank without any loss of fuel) 21. The water level in the sight tube stops rising when all of the water has been vacuumed and separated from the fuel storage tank. 22. The air operated fuel pump allows you purge the fuel from the system after tank cleaning is completed. (this can t be done with an electric pump) 21
22 23. Observe Vacuum Gauge 3. two minutes after fluid appears in sight tube; The initial Vacuum reading will be determined by the elevation of the supply port 1. relative to the elevation of the fluid level in the tank being serviced. Make note of this first gauge reading. As the bag filter accumulates debris the vacuum reading will increase. When the gauge reading has increased 8 Hg. above the initial reading; the filter bag needs to be changed. 24. Observe the Pressure Gauge. When the gauge reads 22PSI, the coalescer filter needs changing. Use only Fueltec 24 Bag Filters in this System 1 micron. 1M24 # micron. 5M24 # Use only Fueltec Filter/ Coalescers in this System CF-10 for the 950AW # CF-20 for the 955SS # Water Separators S11 for the 950AW # S22 for the 955SS #
23 FLUID PICKUP TUBE BUILDING FOR FUELTEC S MOBILE SYSTEMS FUELTEC S FUEL SUCTION HOSE TYPE D CAM-LOCK INCLUDED WITH SYSTEM ATTACH PICKUP TUBE TO CAM-LOCK D WITH A STREET ELBOW FITTING FLUID PICKUP TUBE MADE IN FIELD TO REACH FUEL STORAGE TANK BOTTOM. TUBE CAN BE MADE FROM STEEL PIPE, ALUMINUM, STAINLESS STEEL, PVC, NYLON-6, POLYURETHANE, OR ANY MATERIAL IMPERVIOUS TO THE FUEL THAT YOU ARE IN CONTACT WITH. CUT TUBE BOTTOM AT 45 DEGREES FUEL TANK BOTTOM 23
24 SUCTION HOSE RETURN TO TANK HOSE CLEAN DRY FUEL RETURNING TO TANK THROUGH SHORT PIPE SUCTION INTAKE ON TANK BOTTOM FUEL TANK BOTTOM 24
25 TANK CLEANING USING THE FUELTEC M-2 SUPPLY & RETURN MANIFOLD ALLOWING SUPPLY AND RETURN THROUGH ONE 2 TANK FITTING TYPICAL ON GENERATOR BASE TANKS SUCTION HOSE RETURN TO TANK HOSE CLEAN DRY FUEL RETURNING TO TANK THROUGH MANIFOLD 1/2 INCH PIPE FUEL PICKUP SUCTION TUBE SUCTION INTAKE ON TANK BOTTOM FUEL TANK BOTTOM 25
26 CONTAMINATED DIESEL FUEL 2017 Fueltec 955SS Off road Diesel dyed red Bacteria & Fungus Water Dead bacteria & fungus The fuel found above the tank bottom water is usually clean and water free. Water being heavier than fuel will be found at fuel tank bottoms. In fuel tanks, bacteria and fungus are commonly found at the fuel/ water interface. These microbes need water to live, without water they will die. They feed on components of the fuel while they float on the water. The dead microbes are heavier than fuel or water and sink to the tank bottom When the fuel is added to a tank where microbes are living, the microbes get mixed with both the fuel and water and can easily clog filters. 26
27 Microbes found in diesel fuel Virtually all diesel fuel contains some moisture. Additional water accumulates in tanks as atmospheric moisture condenses. Moisture accumulates in diesel tanks as condensate droplets on exposed tank surfaces, as dissolved water in the fuel and as water bottoms beneath the fuel microbes depend on this water for growth. Additionally, microbes depend on the organic and inorganic molecules in diesel fuel for nutrition. Consequently, some species attack the fuel directly, growing at the expense of hydrocarbons and non-hydrocarbon fuel components. The biodegradation of fuel, in support of microbial growth, is a direct impact of contamination. Color, heat of combustion, pour point, cloud point, detergent and anti-corrosive properties change as microbes selectively attack fuel components. Sulfur-containing molecules are metabolized by a series of species, leading ultimately to the production of high concentrations of hydrogen sulfide. In addition to creating new cells, many microbes produce metabolites which promote further attack. Surfactants facilitate the emulsification of fuel, leading to the formation of a cloudy, invert-emulsion layer above the fuel/water interface. Polysaccharide slimes create microenvironments wherein mixed populations (consortia) of bacteria and fungi carry out biodegradation reactions that would be impossible for a single species outside the microenvironment. The slime also serves as a barrier, protecting the microbes from preservatives. A variety of organic acids (primarily 2-4 carbon atoms) are also produced as by-products of bacterial and fungal growth. 27
Fueltec Models 950AW & 955SS Mobile Fuel Tank Cleaning Systems
Fueltec Models 950AW & 955SS Mobile Fuel Tank Cleaning Systems Operation Manual Fueltec Systems LLC 828-212-1141 www.fueltecsystems.com FEATURES Stainless steel filter housings to resist the acids found
More informationFueltec Models 908 & 919 Mobile Fuel Tank Cleaning Systems
Fueltec Models 908 & 919 Mobile Fuel Tank Cleaning Systems Operation Manual Fueltec Systems LLC 828-212-1141 www.fueltecsystems.com CONTAMINATED DIESEL FUEL Off road Diesel dyed red Bacteria & Fungus Water
More informationFueltec Model CF75.0 Mobile Fuel Polishing & Tank Cleaning Systems
Fueltec Model CF75.0 Mobile Fuel Polishing & Tank Cleaning Systems Fueltec Systems LLC 828-212-1141 www.fueltecsystems.com Fuel Polishing = water and particulate removal Fuel is relatively clean when it
More informationFueltec Models 950AW Mobile Fuel Tank Cleaning System FITTED W/ ARO PUMP
Fueltec Models 950AW Mobile Fuel Tank Cleaning System FITTED W/ ARO PUMP 2017 Fueltec 955SS Fueltec Systems LLC 828-212-1141 www.fueltecsystems.com Today s diesel engines require aircraft quality fuel.
More informationFueltec Models 950AW Mobile Fuel Tank Cleaning System FITTED W/ ARO PUMP
Fueltec Models 950AW Mobile Fuel Tank Cleaning System FITTED W/ ARO PUMP 2017 Fueltec 950AW Fueltec Systems LLC 828-212-1141 www.fueltecsystems.com WARNING This product operates in the highly combustible
More informationMobile Fuel Polishing & Tank Cleaning System
Tank Service Trailer with Fueltec Model CF75.0 Mobile Fuel Polishing & Tank Cleaning System 5 x 10 Single Axel Aluminum Trailer w/ CF75.0 System SKU 101070 Fueltec Systems LLC 828-212-1141 www.fueltecsystems.com
More informationFueltec Model CF75.0 Mobile Fuel Polishing & Tank Cleaning System
Fueltec Model CF75.0 Mobile Fuel Polishing & Tank Cleaning System Featuring High Capacity Filtration Water Separation at 4,500 Gallons per hour Fueltec Systems LLC 828-212-1141 LENZ 2016 www.fueltecsystems.com
More informationFUELTEC CF8.0 PLC AUTOMATIC FUEL POLISHING SYSTEM 480 GPH
FUELTEC CF8.0 PLC AUTOMATIC FUEL POLISHING SYSTEM 480 GPH The Model 8.0-PLC is a fuel polishing system that automatically removes water and debris to prevent bacterial growth and unexpected engine shut
More informationFUELTEC MODEL CF4.0. CRITICAL FUEL FILTRATION SYSTEM For Fuel Storage Up To 10,000 Gallons (38,000 liters)
FUELTEC MODEL CF4.0 CRITICAL FUEL FILTRATION SYSTEM For Fuel Storage Up To 10,000 Gallons (38,000 liters) Today s diesel engines require aircraft quality fuel. Not to many years ago diesel engines were
More informationCRITICAL FUEL FILTRATION SYSTEM For Fuel Storage Up To 10,000 Gallons (38,000 liters)
CRITICAL FUEL FILTRATION SYSTEM For Fuel Storage Up To 10,000 Gallons (38,000 liters) Overview Model CF4.0-PLC The Model 4.0-PLC is a fuel polishing system that automatically removes water and debris to
More informationCF50.0 CRITICAL FUEL SYSTEMS For Fuel Storage Up To 250,000 Gallons (946,000 liters)
CF50.0 CRITICAL FUEL SYSTEMS For Fuel Storage Up To 250,000 Gallons (946,000 liters) Overview: THE CF50.0-PLC-UL Fuel polishing system was initially designed in 2015 for a very large data center group.
More informationINSTALLATION GUIDE FUELTEC- FUEL POLISHING SYSTEM
INSTALLATION GUIDE FUELTEC- FUEL POLISHING SYSTEM WARNING: Read carefully and understand all INSTRUCTIONS before installing this system. Failure to follow the safety rules and other basic safety precautions
More information1500-LB. CAPACITY MOTORCYCLE DOLLY OWNER S MANUAL
1500-LB. CAPACITY MOTORCYCLE DOLLY OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationIntended Users This document is intended for Gasboy-certified Authorized Service Contractors (ASCs) and Customer Specified Contractors (CSCs).
MDE-4740B Atlas Bezel Upgrade Kit (M08400K001) Installation Instructions February 2010 Introduction Purpose This document provides instructions to install the Atlas Bezel (M08400A001) using the M08400K001
More informationPurpose This document provides installation instructions for the Gasboy 9820 Pump Interface Kit.
MDE-4864 Gasboy 9820 Pump Interface Kit Installation Instructions October 2009 Introduction Purpose This document provides installation instructions for the Gasboy 9820 Pump Interface Kit. Table of Contents
More informationAIR PAINT SHAKER OWNER'S MANUAL
AIR PAINT SHAKER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More information20- G A L L O N O I L D R A I N W I T H C A S T E R S OWNER S MANUAL
20- G A L L O N O I L D R A I N W I T H C A S T E R S OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationInstallation. Introduction
Installation MDE-4369 Aviation Tubing Retrofit Kit for Gasboy Q Models Kits M05023K001 & K05023K002 October 2004 Introduction This manual provides installation instructions for Kits M05023K001 & M05023K002
More information18- G A L L O N O I L D R A I N D O L LY OWNER S MANUAL
18- G A L L O N O I L D R A I N D O L LY OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information15-GALLON OIL DRAIN DOLLY WITH 12 VOLT PUMP
15-GALLON OIL DRAIN DOLLY WITH 12 VOLT PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More information5-FT. DELUXE ALUMINUM CARGO CARRIER WITH 5-FT. RAMP OWNER S MANUAL
5-FT. DELUXE ALUMINUM CARGO CARRIER WITH 5-FT. RAMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More informationIMPORTANT INFORMATION
MDE-4619 Vapor Recovery Kit Installation Instructions for Models 9123K and 9823K December 2006 Introduction Purpose This manual provides installation instructions for the following kits: M07494K001 - Vapor
More informationALUMINUM CARGO CARRIER WITH FOLDING RAMP
ALUMINUM CARGO CARRIER WITH FOLDING RAMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information8GAL STEEL OIL DRAIN
8GAL STEEL OIL DRAIN OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information48 in. DELUXE ALUMINUM CARGO CARRIER WITH RAMP
48 in. DELUXE ALUMINUM CARGO CARRIER WITH RAMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationDriveway Draggin OWNER S MANUAL
Driveway Draggin OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationROLLING GARDEN WORK SEAT OWNER S MANUAL
ROLLING GARDEN WORK SEAT OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationPurpose This document provides installation instructions for Gasboy 9800A/2600A Pump Interface Kits.
MDE-4863 Gasboy 9800A or 2600A Pump Interface Kits Installation Instructions October 2009 Introduction Purpose This document provides installation instructions for Gasboy 9800A/2600A Pump Interface Kits.
More informationIntroduction 1 Important Safety Information 3 Installing TopKAT Series 900 Replacement Report Printer Kit 5
MDE-5061 TopKAT Series 900 Replacement Report Printer Kit (M11810K001) Installation Instructions March 2013 Introduction Purpose This manual provides instructions for installing the TopKAT Series 900 Replacement
More informationIntended Users This manual is meant for Gasboy Authorized Service Contractors (ASCs) who will install this kit on Atlas units.
MDE-4557 Atlas Hand Drive Kit M06874K001 Installation Instructions July 2006 Introduction This manual provides instructions to install the Hand Drive Kit (M06874K001) on Atlas Mechanical Self-contained
More informationIMPORTANT INFORMATION
MDE-4631 Metrologic MS7120 Bar Code Scanner Setup January 2007 Introduction Purpose This document contains a verification sequence that allows you to determine whether your scanner is configured correctly,
More information1/2 HP SUMP PUMP OWNER'S MANUAL
TM 1/2 HP SUMP PUMP OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More information500 LB. CAPACITY KNOCKDOWN CARGO CARRIER
500 LB. CAPACITY KNOCKDOWN CARGO CARRIER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationFOLDING UTILITY CART
FOLDING UTILITY CART OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More information48 INCH SWEEPER. with Quick Height Adjustment Handle OWNER S MANUAL
48 INCH SWEEPER with Quick Height Adjustment Handle OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More information1 2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL
2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information1500-LB. HEAVY-DUTY WHEEL DOLLY (SET OF 2) OWNER S MANUAL
1500-LB. HEAVY-DUTY WHEEL DOLLY (SET OF 2) OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationRequired Tools and Materials Following tools and materials are required to install the Boot Switch Kit: Nut Driver Heat Gun Thread Lock
MDE-5163A Boot Switch Kit (M14142K001) Installation Instructions August 2014 Introduction Purpose This manual provides instructions to install the Boot Switch Kit (M14142K001) in Gasboy 9800A/2600A/215A/7215A
More information800 LB ATV DOLLY OWNER S MANUAL
800 LB ATV DOLLY OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information1 MECHANICAL FUEL METER
1 MECHANICAL FUEL METER USER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More information#9040 FUEL TANK SWEEPER
#9040 FUEL TANK SWEEPER INSTRUCTION MANUAL FILTERS AND REMOVES FINE BIO-CONTAMINANTS, ALGAE, ETC. SWEEPING PROCESS REMOVES LARGE CONTAMINANTS FROM OIL TANKS SUCH AS RUST, WATER, CRUDE AND DIRT CIRCULATES
More informationH E AV Y- D U T Y G A R D E N W A G O N w i t h R A I L S OWNER S MANUAL
H E AV Y- D U T Y G A R D E N W A G O N w i t h R A I L S OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More information150LB. CAPACITY ATV CARGO CARRIER
150LB. CAPACITY ATV CARGO CARRIER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationHOSE REEL CART OWNER S MANUAL
HOSE REEL CART OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationHEAVY DUTY ADJUSTABLE TRAILER DOLLY WITH DUAL CASTERS
HEAVY DUTY ADJUSTABLE TRAILER DOLLY WITH DUAL CASTERS OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules
More informationOWNER S MANUAL. Item #
GAS-POWERED CONCRETE SCREED OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
More informationVoltmaster Centrifugal Trash Pumps
Voltmaster Centrifugal Trash Pumps Model TSP2, TSP3 and TSP4 Owner s Manual February 2011 Table of Contents 1 Introduction............................ 1 1.1 Read before using..................... 1 1.2
More informationAir-Operated Waste Oil Drainer
Air-Operated Waste Oil Drainer 20-Gallon Tank Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationDIGITAL OIL PRESET METER OWNER S MANUAL
DIGITAL OIL PRESET METER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationPackage Contents Part A (3) I-Beam (1) Base (2) Other parts
Page 1 Installation Instructions for 81245 Adjustable Height Gantry Crane 1-Ton Capacity Table of Contents Important Safety Information pg. 2 Specific Operation Warnings pg. 2 Main Parts of Product pg.
More informationIntroduction. Caution. This manual provides installation instructions for installing the Atlas Discharge and Valve Conduit Retrofit Kit.
MDE-4503 Atlas Discharge and Valve Conduit Retrofit Kit July 2005 Introduction This manual provides installation instructions for installing the Atlas Discharge and Valve Conduit Retrofit Kit. Under certain
More informationFuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
More informationPolypropylene Piston Drum Pumps
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More information2-in-1 Cargo Carrier. and Bike Rack OWNER S MANUAL
2-in-1 Cargo Carrier and Bike Rack OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationAluminum Cargo Carrier
Distributed By: TRACTOR SUPPLY COMPANY 540 VIRGINIA WAY BRENTWOOD, TN 3707 For customer support, call: --376-960 www.tractorsupply.com MADE IN CHINA INSTALLATION INSTRUCTION Sku 07405 Sku 07405 Operation
More information18V CORDLESS GREASE GUN. (Tube Grease Is Not Including)
8V GREASE GUN 8V CORDLESS GREASE GUN (Tube Grease Is Not Including) ' PRODUCT SPECIFICATION Charger Input Power Battery Output Power - Battery Capacity Battery Pack Charge Time Maximum Operating Pressure
More information600 LB. ADJUSTABLE TRAILER DOLLY
600 LB. ADJUSTABLE TRAILER DOLLY OWNER S MANUAL Model # TMD-600AFF WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More information2-in-1 Air Operated Waste Oil Drainer
2-in-1 Air Operated Waste Oil Drainer 24-Gallon Tank Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More informationVICE MOUNTED BEAD ROLLER
VICE MOUNTED BEAD ROLLER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationMANUAL FLUID EXTRACTOR
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More informationPressure Washer Hose Reel
Pressure Washer Hose Reel Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationFuel Catalyst AFC-705 / AFC-805
Fuel Catalyst AFC-705 / AFC-805 ALGAE-X Fuel Catalyst is a powerful full spectrum additive and tank cleaning agent. It provides superior fuel quality for engines and storage tanks, lowering operating cost,
More informationInductive. SeekTech Clamp WARNING! Operator s Manual
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com SeekTech Clamp Inductive Operator s Manual WARNING! Read this operator s manual
More informationOPERATING INSTRUCTIONS. Note: 6V Charging. Requires Manual Shut Off.
Requires Manual Shut Off. 6 / 2 AMP,, DUAL RATE BATTER TTERY CHARGER 45005 OPERATING INSTRUCTIONS E224783 E224783 Note: 6V Charging Due to continuing improvements, actual product may differ slightly from
More informationSBC12 H Operating instructions Mode d emploi Manual de instrucciones
*254901* 254901 SBC12 H Operating instructions Mode d emploi Manual de instrucciones Safety Precautions Read all Instructions GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING! Read and understand
More informationOperating and Installation Instructions
Model Number 40401-c (-sp) Electronic Fuel Pump Operating and Installation Instructions This Product is Patent Pending. Application available upon request CAUTION! This product is to be installed only
More informationSAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9
SAFETY AND OPERATING MANUAL 2 Original Instructions General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationSBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions
SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationALUMINUM JACK. 3,000 lb. Jack Capacity & JACK STAND COMBO. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ALUMINUM JACK 3,000 lb. Jack Capacity & JACK STAND COMBO 6,000 lb. Jack Stand Capacity (when used in pairs) Model 91850 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationFLEX-ING TM DISPENSER HOSES INSTALLATION GUIDE
FLEX-ING TM DISPENSER HOSES INSTALLATION GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information
More informationHeavy-Duty Welding Fabrication Table
Heavy-Duty Welding Fabrication Table with Fix-Up Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More informationSIDE DUMPING WAGON OWNER S MANUAL
3-IN-1 SIDE DUMPING WAGON OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationNaviTrackTM Transmitter
NaviTrackTM Transmitter Pipe and Cable Line Transmitter OPERATOR S MANUAL 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com WARNING!
More informationS Q UA R E T U B E T R A I L E R J A C K OWNER S MANUAL
S Q UA R E T U B E T R A I L E R J A C K OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information1000-LB. HYDRAULIC HOIST OWNER S MANUAL
1000-LB. HYDRAULIC HOIST OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationHydraulic Bead Breaker Kit
Hydraulic Bead Breaker Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information3500-LB. TRAILER JACK OWNER S MANUAL
3500-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationANTI-SYPHON VALVE INSTALLATION GUIDE
ANTI-SYPHON VALVE INSTALLATION GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information contained
More informationRMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool
RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL
More informationInstallation Instructions for Aux 101 Kit A044Z055
Instruction Sheet 7-2013 Installation Instructions for Aux 101 Kit A044Z055 1 Introduction The information contained within is based on information available at the time of going to print. In line with
More informationSeekTech Inductive Clamp
Inductive Clamp Manual SeekTech Inductive Clamp! Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock,
More informationPMA INTAKE FILTER SCREEN INSTALLATION GUIDE
PMA INTAKE FILTER SCREEN INSTALLATION GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information
More informationAirless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure
INSTRUCTIONS DP-6376 Airless Spray Gun 5000 psi (345 bar) Maximum Working Pressure INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Table of Contents Warnings......................................
More informationE-DRIV MD-Series DC Torque Control System Calibration Procedure
Revision: 1.1 July 05, 2017 E-DRIV MD-Series DC Torque Control System Calibration Procedure www.mountztorque.com 1080 N 11 th St - San Jose CA 95112-408.292.2214 1 GENERAL SAFETY RULES WARNING! Read and
More informationGarden Hose Reel with 3/4In. x 100Ft. Hose. Owner s Manual
Garden Hose Reel with 3/4In. x 100Ft. Hose Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information5000- LB. C A PA C I T Y P O R TA B L E W I N C H OWNER S MANUAL
5000- LB. C A PA C I T Y P O R TA B L E W I N C H OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationSB20G. Large Pressurized Abrasive Blaster Assembly & Operating Instructions
SB20G Large Pressurized Abrasive Blaster Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides
More informationFLEX CONNECTOR HEAT SHRINK SLEEVE INSTALLATION GUIDE
FLEX CONNECTOR HEAT SHRINK SLEEVE INSTALLATION GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information
More informationRPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner
RPS5 ORIGINAL INSTRUCTIONS Cordless Pruner Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.
More information12V Oil Extractor Pump
12V Oil Extractor Pump Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationAdjustable Steel Welding Table
Adjustable Steel Welding Table Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationTP300 INDUSTRIAL TRASH PUMP OPERATOR S MANUAL
TP300 INDUSTRIAL TRASH PUMP OPERATOR S MANUAL IT IS EXTREMELY IMPORTANT TO READ AND UNDERSTAND THE ENTIRE CONTENTS OF THIS OPERATOR S MANUAL BEFORE ATTEMPTING TO OPERATE THE PRODUCT. THIS EQUIPMENT IS
More informationAir-Operated Double-Diaphragm Pump
Air-Operated Double-Diaphragm Pump Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More information110 Volt/12 Volt Portable Inflator
110 Volt/12 Volt Portable Inflator Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationPRESSURISED SANDBLASTER
PRESSURISED SANDBLASTER MODEL NO: CPSB200 PART NO: 7640128 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this
More information2-Pack Indoor Simulated Dome Security Cameras
2-Pack Indoor Simulated Dome Security Cameras Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More information1/2" AIR DRIVEN DIAPHRAGM PUMP
1/2" DRIVEN DIAPHRAGM PUMP OPERATION AND SERVICE GUIDE O-1225D NOV. 2008 Page 1 of 6 Refer to Bulletin P-605, Parts List P-9151 DRIVEN, DOUBLE DIAPHRAGM PUMP MANUAL Congratulations on purchasing one of
More informationTable of Contents. Safety Assembly Pre-operation / Starting. 7. Operation.. 8. Maintenance. 9. Storage 10
Table of Contents Safety... 3 Assembly... 6 Pre-operation / Starting. 7 Operation.. 8 Maintenance. 9 Storage 10 Parts drawings..11 Parts list by number..12 Notes.13 2 Safety Information Attention; this
More informationElectric Chainsaw Sharpener With Bar Mount
Electric Chainsaw Sharpener With Bar Mount Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL
CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When
More information