The ultimate power pack 6130 CVT 6145 CVT 6160 CVT 6170 CVT 6185 CVT 6205 CVT 6215 CVT 6230 CVT. BETTER TRACTORS.

Transcription

1 The ultimate power pack 630 CVT 645 CVT 660 CVT 670 CVT 685 CVT 605 CVT 65 CVT 630 CVT BETTER TRACTORS.

2 OUR PROFIT. OUR FUTURE. OUR STEYR. 03 INTRODUCTION TRANSMISSION TECHNOLOGY S-TRONIC 08 CVT ENGINE 3 PTO TECHNOLOGY 4 5 HYDRAULIC HITCH 6 DRIVER COMFORT 3 IDEAL WORK 4 5 SERVICE AND MAINTENANCE 6 9 TECHNICAL DATA

3 The CVT has much to offer: S-tronic to monitor your driving strategy and guarantee best in class efficiency ecotech for lower consumption and higher power infinitely-variable transmission for optimum power usage kph at a fuelsaving,550 rpm* Power Plus for up to 38 hp more power active stop control for more safety Excellent performance and economy INTRODUCTION Easy-Tronic headland management to reduce driver interventions to a minimum low noise level of just 69 db(a) for stress-free work Regardless of whether its primary tillage, ground care, drilling, municipal work or various transport tasks, the new generation of CVT tractors are designed for maximum power transfer to the ground and economic fuel consumption. The basis is provided by the innovative gearbox design with continuously variable transmission which incorporates more than ten years of successful CVT expertise. And ecotech engine technology, which thanks to the environmentally friendly 6.7 litre turbo diesel with intercooling and common rail injection, fulfils EU exhaust standard Tier 4a. As a result, each CVT tractor is a champion at delivering power and saving money. Available in eight models with a maximum power rating of 7 to 69 hp and the highest level of working and driving comfort. Steyr delivers on its promise, backed by tradition, quality and innovation. * Steyr 670 CVT to 630 CVT

4 04 TRANSMISSION TECHNOLOGY Continuously variable into a new working future. The CVT earned its name from the latest continuously variable transmission technology. Continuously Variable Transmission stands for a smooth ride and perfect control. To achieve this, Steyr developed an intelligent method of optimising torque to enable a driving speed of 50 kph at a reduced engine speed of,550 rpm**. The power from the engine is transmitted partly hydraulically but mainly mechanically. The result is robust technology to meet the highest expectations and perfect, continuously variable drive for every job - from creeper speed through to high speed.

5 The new transmission generation: continuously from 0 to 50* kph active stop control DKT Double Clutch Technology extended maintenance intervals (,00 hours) for transmission S-tronic engine/transmission management 50 kph at,550 rpm** EFFICIENT POWER TRANSMISSION and rapid response thanks to rugged and maintenance-free mechanical gear unit with DKT Double Clutch Technology. The result is smooth gear changing without any interruption to power flow, improving acceleration performance and fuel efficiency. TRANSMISSION TECHNOLOGY 05 optimised fuel consumption load-independent control integrated super creep speed DKT Double Clutch Technology CONTINUOUSLY VARIABLE CONTROL of the transmission ratio by hydrostatic units. COST EFFICIENT AND COMFORTABLE by automatically adapting the necessary transmission ratio to the desired travelling speed, keeping engine speed within the optimum range. Powershuttle lever for changing direction 6 key functions in one hand thanks to the Multicontroller lever *depending on country-specific legislation and specifications ** Steyr 670 CVT to 630 CVT

6 04 Intelligent technology for tomorrow's farmers. The key components communicate continuously with each other using the most modern network technology to provide uninterrupted data exchange. The S-tronic engine/transmission management system and information from the EHR, PTO, remotes, 4WD and differential lock as well as the operator controls and performance monitor are all coordinated to provide optimum adjustment to the operating conditions at any time.

7 continuously-variable transmission tractor and performance monitor engine important tractor functions, Multicontroller and S-Tech 300 monitor Steyr S-tronic controls engine/ transmission management and links the following components: 07 S-TRONIC engine continuously variable transmission EHR (electronic hitch regulation) hydraulic remotes tractor and performance monitor operator controls service tool software S-Guide automatic steering system with GPS receiver and S-Tech 600 colour touch-screen for even greater accuracy with Precision Farming AUTOMATIC ADJUSTMENT OF MOST EFFICIENT ENGINE SPEED for highest productivity thanks to S-tronic. This enables a driving speed of 50 kph at a fuel-saving engine speed of.550 rpm**, while in the field a constant PTO speed can be maintained during PTO work. For large-area muck spreading there is a manual mode for setting a consistent transmission ratio so that the engine speed and PTO speed match the driving speed. HIGHEST PRECISION. While the automatic S-Guide system looks after the steering, the driver can fully concentrate on the machinery. The DGPS-based system ensures parallel tracking while working on the straight, in curves, at the headland and on uneven ground. Even in the most difficult terrain, weather conditions or at night, the precision of up to cm ensures that there is no risk of overlapping or leaving out areas. S-Tech 600 colour touch-screen* * this monitor is ISOBUS 783 compatible ** Steyr 670 CVT to 630 CVT

8 8 % LESS FUEL 3 % MORE PRODUCTIVITY 08 CVT ENGINE Available today with the power of tomorrow. Each CVT tractor is powered by an environmentally friendly 6.7-litre turbodiesel with intercooling and common rail injection technology. On the one hand the innovative engine concept delivers enormous power and excellent elasticity at a low engine speed. On the other hand it achieves low exhaust emission values, which comply with EU directive Tier 4a, and money-saving fuel consumption. That is exactly what ecotech by Steyr stands for.

9 ecotech environmentally-friendly engine technology: 6-cylinder engine with turbo charger and intercooler common rail technology hp EU emissions directive Tier 4a SCR technology (Selective Catalytic Reduction) power curve 630 CVT: power with engine power management + hp with epm. power without engine power management rpm + 4 hp MORE PERFORMANCE AND LOWER CONSUMPTION THANKS TO ECOTECH. This futureoriented technology presents farmers with three convincing arguments: cost effectiveness productivity easy operation These advantages are thanks to the newly developed SCR exhaust treatment system that optimises fuel consumption at the same time as improving the response of the engine. This system injects an optimised quantity of AdBlue in atomised form into the exhaust gas, depending on the operating conditions. The SCR catalyser then converts the poisonous nitrogen oxides into nitrogen and water. The engine itself is not affected by the process and can produce optimum combustion efficiency. CVT ENGINE 09 C A ENGINE B D A AdBlue tank C engine B control module D SCR catalyser Using the ECO lever the driver can decide the engine speed range to match the engine performance and efficiency to each job. filling the AdBlue tank control lever for ECO mode

10 0 CVT ENGINE POWER PACK and big saver. The electronically controlled diesel engines enable a torque rise of up to 55 % at the PTO and deliver excellent pulling power and high elasticity. Consistent power output over a speed range of 700 rpm with 0 % power in reserve gives some indication of their economy. A high starting torque delivers enormous lugging power, even at low engine speeds, for pulling away with heavy trailers.

11 ECO-FAN* FOR CONSTANTLY CLEAN RADIATORS. The cooler radiators are cleaned automatically by reversing the flow of air. This means optimum cooling for the engine and the resulting high power output. The full-length fins with threestage cleaning system in the air intake guarantee optimum cooling, even when working with front-mounted machines. This system extends the maintenance intervals for the air filter and increases the service life of the engine. CVT ENGINE EVEN MORE PERFORMANCE AND PRODUCTIVITY delivered by the engine thanks to Power-Plus power management. As a result the power delivered by the engine can be increased by up to 38 hp** during transport work or while working with the PTO, for example. This automatic system also ensures that the PTO speed or transport speed remains constant. Even more equipment can be used air compressor engine brake air conditioning compressor powerful front PTO Optimised operation: engine load limiting normal/saving mode up to 55 % torque increase high maximum engine torque Power Plus power management delivers up to 38 hp more engine brake *depending on country-specific legislation and specifications ** Steyr 670 CVT with Power Plus ECO fan*

12 PTO TECHNOLOGY For highest efficiency and power transfer. Steyr CVT tractors are equipped as standard with a PTO that can be engaged under load to transmit engine power extremely efficiently. The standard PTO speed of,000 rpm is reached at an engine speed of,893 rpm. The energy-saving speed of,000e is reached at an engine speed of just,6 rpm (73 % of maximum engine speed). This not only saves up to 5 % fuel, it also protects the engine and the environment. Efficient transmission of engine power: ELECTRONIC SOFT START ensures that PTO-driven machines are started up gradually. POWERFUL FRONT PTO* with,000 rpm (standard PTO) and 6-spline PTO shaft as standard. Engine power is taken off directly from the crankshaft without any joints in between. The system is integrated so that equipment can be mounted very close to the front of the tractor. ELECTRO-HYDRAULIC ENGAGEMENT OF THE REAR PTO at the press of a button. The PTO is available as standard with a 6-spline profile, with -spline and 0-spline versions also available. IDEAL MATCH BETWEEN FRONT PTO* AND FRONT HITCH* provides a second mounting area for equipment combinations to save time and costs. PTO MANAGEMENT* for greater working comfort. Front and rear PTOs can be programmed to switch off and on again automatically when the hitches are raised. 540/540E/000 PTO (630 CVT 660 CVT), optional: 540E/000/000E 540E/000 PTO (670 CVT 630 CVT), optional: 000/000E or 540/540E/000/000E electro-hydraulic engagement under load perfectly integrated PTO extremely efficient operation PTO management* Soft start control Special equipment option: front PTO and hitch to match the overall performance of the tractor

13 3 4 Controls for front and rear PTO and PTO management 3 Front PTO Fender-mounted control for rear PTO 4 Front hitch *depending on country-specific legislation and specifications

14 Precision hydraulics for top performance. The hydraulic system on the CVT is based on an axial piston pump delivering an oil flow of up to 70 l/min*. This ensures extremely good response throughout the whole hydraulic system, including all machinery controlled by remote. The infinitely-variable adjustment of the flow rates for up to nine units enables precisely the right flow to be delivered to the right point at the right time. With a maximum lifting power of up to 0,460 kg* the CVT easily handles any mounted equipment. FRONT HITCH MANAGEMENT IDEAL IN COMBINATION WITH THE FRONT PTO. With a maximum lifting power of up to 3,785 kg*, the front hitch is equipped with two double-acting hydraulic cylinders. The position of the new, optimised hitch frame can be set to float with equipment that needs to hug the ground, such as a mower, for example. Up to four quick couplers are available for hydraulic-powered equipment. Safety with heavy equipment: modern load-sensing hydraulics high maximum lifting power of up to 0,460 kg* precision hitch control with EHR dynamic oscillation cancelling ride control programmable hydraulic functions front hitch optional for mounted combinations power beyond plate: up to 70 l/min* hydraulic flow rate easy and safe to hitch up and detach mounted equipment ideal adjustment in every terrain * Steyr 670 CVT to 630 CVT

15 LOAD SENSING HYDRAULIC SYSTEM as an option for simultaneous operation of several oil circuits as needed in multiple application jobs such as municipal operations involving a front loader and hydraulic-powered equipment. EHR AND RIDE CONTROL FOR ENHANCED COMFORT AND SAFETY. The EHR electronic hitch regulation system delivers precision control. The dynamic ride control system automatically cancels out oscillations in heavy mounted equipment at high travelling speeds. QUICKER AND EASIER EQUIPMENT MOUNTING thanks to universal configuration of rear hitch. The standard quick couplers on the lower linkages enable time-saving and convenient hitch-up without leaving the cab. Additional switches outside on the rear fenders can also be used to slowly lift and lower the hitch. SAFE WORK IN ALL TERRAINS thanks to hitch stabilisers or secure position of lower linkages. Automatic side stabilisers are available as an option to provide extra safety when working on steep slopes or with large equipment. FRONT AND REAR HITCH Joystick Fender-mounted hitch controls Fender-mounted remote valve controls

16 DRIVER COMFORT 6 Welcome to the Steyr CVT command centre. Welcome to the CVT's generously designed ergonomic cab. From the cockpit the latest design of controls and instruments operate and monitor all functions with a previously unattainable level of comfort. Farmers experience the productivity and economy of the CVT through its impressive time and effort saving features that all start in the command centre. THE NEWEST MULTICONTROLLER is operator friendly and integrated into the adjustable right-hand armrest of the driver's seat. Six of the tractor's key functions are therefore within immediate grasp. ICP INTUITIVE CONTROL PANEL. This multifunction keypad is also integrated into the right-hand armrest and enables easy control of all the tractor's important functions such as the hydraulic system, PTO(s), 4WD and differential lock, headland management and much more. The tractor monitor and performance monitor are integrated into the right-hand A-pillar within the driver's natural field of vision to provide the most important performance information at-a-glance. Multi-functional ergonomic cockpit Multicontroller lever functions: - speed control - speed range - Powershuttle -. or 5th remote valve control - rear hitch - Easy-Tronic headland management or constant engine speed ICP - Intuitive Control Panel tractor and performance monitor integrated into right-hand A-pillar S-Tech 300, the integrated touch-sensitive colour monitor Tractor and performance monitor ICP - Intuitive Control Panel

17

18 Shuttle forwards/reverse Cruise control - speed selector 8 DRIVER COMFORT Controls for hydraulic remotes Rear Hitch: Raise / Lower Speed controller Easy-Tronic activation The Multicontroller lever: 6 key functions in one lever.

19 S-Tech 300 monitor ICP - Intuitive Control Panel Everything under control Controls for remote valves Joystick for up to 4 additional remotes DRIVER COMFORT 9 Front PTO Rear PTO Multicontroller lever with 6 key functions 9 0 EHR position control Front PTO EHR float control 3 EHR rear hitch lift/lower 3 4 Oscillation-cancelling hitch 4 EHR front hitch lift/lower CVT mode Flow rate controls and timers for remote valves ECO mode 5 Rear PTO management 5 Wheel slip control 6 Wheel slip control 6 Lowering choke for front hitch 7 Easy-Tronic headland management 7 8 4WD and differential lock management 8 9 Constant engine speed 9 0 Lowering position for front hitch 0 Front hitch lift limiter Lowering choke for rear hitch Hitch height limiter EHR sensitivity

20 Maximum visibility for maximum safety. The sloping engine hood provides an unrestricted view of the work area. The CVT also provides the driver with a clear view to the rear. Large electric-heated telescopic rear view mirrors* adjustable from inside the cab ensure that an eye can be kept on each side of wide mounted loads past the rounded fenders. An additional roof window gives a clear view of the loader. First class working environment: huge suspended luxury cab low noise level of 69 db(a) easy access interior lighting cab design without B pillars for best view of all mounted equipment and work areas air conditioning HiFi stereo system* with Bluetooth air suspension seat with lumbar support excellent all round visibility telescopic rear view mirrors* roof window for clear view of loader

21 Comfort and safety at the highest level. The CVT cab is a workplace that feels good. The level of equipment corresponds with that of a top class car and ranges from a fine-tuned climate control system through to personal ergonomic settings for the seat and steering wheel. Safety is also a major consideration. A contact switch prevents the tractor from being started unless the driver is seated, for example. Thanks to the cab suspension the luxury cab provides a comfortable working environment on the road and in the field. DRIVER COMFORT FATIGUE-FREE WORK. Drivers remain concentrated and focussed even after a long working day thanks to the low noise level of 69 db(a). The height-adjustable tilting steering column, horizontal and vertical seat adjustment and personal seat suspension and lumbar support settings also contribute here. PERFECT ILLUMINATION FOR WORKING AT NIGHT. Two floodlights for the road, six working lights integrated into the front of the roof and up to four work lights at the rear end of the roof ensure perfect visibility at night time. Floodlights can also be mounted on the rear fenders. Two additional work lights are integrated into the radiator grill. Two adjustable work lights can also be mounted on the handrails to light up the area between the front and rear wheels. FINE-TUNED CLIMATE CONTROL. A large filter in the ventilation system keeps the air clean inside the cab. The climate control system* regulates the air condition and cab heating to maintain a consistent temperature inside the CVT. Passenger seat that earns its name: large, ergonomic and comfortable Steering wheel height and angle can be adjusted *depending on country-specific legislation and specifications

22 Designed for optimised operations. The sole purpose of the CVT is to prove its worth during operation. With its intelligent technologies it is more than ready to take on every challenge. It makes daily work easier. Modern agriculture headed by Precision Farming is only possible if equipment is one step ahead of requirements. Like the Steyr CVT. OPTIMISED WORKING

23 With the technology of tomorrow: Easy-Tronic headland management optimum ground clearance automatic 4WD and front/rear differential lock active front axle suspension** tyre and rim combinations for every application precise, smooth steering steering angle up to 55 4-wheel braking S-Guide 5.45 m SUPERB MANOEUVRABILITY. The sleek engine outline, central driveline and a steering angle of 55 ensure excellent handling characteristics and a turning radius of just 5.45 m (630 CVT 660 CVT). ACTIVE FRONT AXLE SUSPENSION** constantly monitors front axle movements and responds depending on a range of parameters such as hitch position, braking performance, acceleration etc. so ensure smooth driving response. 4WD AND DIFFERENTIAL LOCK MANAGEMENT* is provided to increase work efficiency, partially automated using three functions OFF/ON/AUTO. OPTIMISED WORKING 3 STEYR EASY-TRONIC HEADLAND MANAGEMENT saves loads of time at the end of the field. The sequence for the headland is recorded once and the Easy- Tronic system ensures that the same sequence is repeated automatically. Up to 30 steps can be saved in one or two separate programs. Just press the Easy- Tronic button on the Multicontroller to activate the saved program and Easy-Tronic does the rest. OPTIONAL S-GUIDE STEERING SYSTEM manages and controls passes in the field with even more precision. The DGPS-based system takes care of steering and ensures parallel tracking to within cm while working on the straight, in curves, at the headland and on uneven ground - and at night time as well, of course. EVEN MORE SAFETY THANKS TO STEYR OPTI STOP. Pressing the brake pedal automatically engages 4WD so that the braking effect is transferred to all four wheels. The CVT is also available with engine brake, front axle brakes, pneumatic trailer brakes or hydraulic trailer brakes. Keypad for Easy-Tronic headland management Easy-Tronic button on Multicontroller *depending on country-specific legislation and specifications ** Steyr 670 CVT to 630 CVT

24 SERVICE AND MAINTENANCE 4 The Steyr service concept delivers what Steyr quality promises. Steyr tractors are designed for thousands of hours of hard work. Thanks to the easy-to-perform maintenance routines and easy access design of the CVT, the most important service points can be taken care of quickly and effectively by the customers themselves. The excellent high quality of all Steyr tractor components promotes low maintenance and servicing costs, reflected in the long engine oil change intervals of 600 operating hours. In the unlikely event that you should experience difficulties then you can rely on the large Steyr network of dealers with its trained specialists. Reliability Steyr style: excellent access for maintenance long engine oil change intervals (600 operating hours) extensive customer service network professional customer service people professional finance advice excellent spare parts service quick and easy cleaning of radiator and air conditioning easy daily checks high performance components for a perfect start in all weathers engine hood can be opened even with front-mounted implements

25 Continuous cleaning using a Piclon filter ensures that the filter only needs to be maintained when the relevant warning light goes on. Convenient filling up. Easy to check drive belt tension. Check and top up oil level without lifting engine hood. Single-piece engine hood is lifted by gas-filled piston into two positions (45 /90 ), even while front implement is still mounted. STEYR PROTECT. Extended insurance cover for your Steyr tractor. 6 Quick and easy cleaning of radiator and air conditioning. 7 Steyr spare parts service guarantees an extended working life and a higher resale value for your tractor. Steyr parts are available from the dealership network within 4 hours STEYR 000 BETTER TRACTORS. 8 Steyr customer service: all our staff are continuously trained in the use of the latest technology and equipment. Our sales team is pleased to advise you on the performance and safe operation of your Steyr tractor. Tailor-made finance packages, leasing or hire schemes available from MAX - the new premium service. We are always ready for you, around the clock, the whole year. Our express delivery: because your harvest cannot wait. Whenever and wherever you need the shipment, your job will be given the highest priority during the season. Call free of charge and let MAX look after you. Your call is free-of-charge. Some providers in Europe may impose a charge if the call is made from a mobile phone. Please ask your provider in advance.

26 Performance through innovation ENGINE POWER STEYR 630 CVT Max. power with Power Plus at,800 rpm = 98 kw (69 hp) Max. power at,800 rpm = 83 kw (49 hp) 3 Nominal power with Power Plus at,00 rpm = 9 kw (6 hp) P hp 4 4 Nominal power at,00 rpm = 67 kw (8 hp) Torque rise Standard/Power Plus 40 %/3 % Power hp TECHNICAL DATA A Max. torque with Power Plus at,500 rpm =,60 Nm B Max. torque at,500 rpm =,089 Nm Power Plus becomes available in certain conditions during transport work and PTO work A B M,00,00, Torque M [Nm],000,00,400,600,800,000,00 Engine speed [rpm] STEYR CVT DIMENSIONS: model-specific C E D B A DIMENSIONS ) 630 CVT 645 CVT 660 CVT 670 CVT 685 CVT 605 CVT 65 CVT 630 CVT A length/b width/c height [mm] D wheelbase/e track width front/rear [mm] 4,79/,470/3,070,789/,35 min.,85 max./,430 min.,30 max. 5,07/,68/3,090,884/,538 min.,60 max./,530 min.,30 max. ) with standard tyres

27 MODEL TRANSMISSION ENGINE BETTER TRACTORS. Travelling speed* continuously-variable transmission 0 40 (50) kph Max. engine power ECE R0 3) Power Plus [kw/hp] Nominal rating ECE R0 3) Power Plus [kw/ps] Max. engine power ECE R0 3) [kw/hp] Nominal rating ECE R0 3) [kw/hp(cv)] Engine speed at max. engine performance [rpm] Engine nominal speed [rpm] Max torque with Power Plus rpm] Max torque rpm] Torque rise OECD Standard/Power Plus [%] 630 CVT 6/7 8/60 09/48 96/3,800,900, / CVT 38/88 9/75 0/63 07/46,800,900, / CVT 49/03 40/90 30/77 8/60,800,900, /4 670 CVT 60/8 5/05 38/88 3/67,900,000, / CVT 7/34 6/0 49/03 36/85,900,000,00, / CVT 84/50 73/35 60/8 47/00,900,000,00, /34 65 CVT 9/60 8/46 7/34 58/5,900,000,00, / CVT 98/69 9/6 83/49 67/8,800,00,60,089 40/3 MODEL HYDRAULICS 4WD BETTER TRACTORS. EHR hitch system with dynamic ride control Ride Control Max. pump rating Standard/optional [l/min] Max. operating pressure [bar] Max. Lifting force [kg] Max. 5 extra remotes electronic 3 midmounted electronic remotes Hydraulic ram Lifting force Front hitch* [kg] Shift type electro-hydraulic with traction management 630 CVT 5 PFC/40 PFC 0 8,57 with quick 3,568 Cat II/III coupler Cat II/III with quick coupler 645 CVT 5 PFC/40 PFC 0 8,57 3,568 Cat II/III with quick coupler 660 CVT 5 PFC/40 PFC 0 8,57 3,568 Cat III with quick coupler 670 CVT 50 PFC/70 PFC 5 0,460 3,785 Cat III with quick coupler 685 CVT 50 PFC/70 PFC 5 0,460 3,785 Cat III with quick coupler 605 CVT 50 PFC/70 PFC 5 0,460 3,785 Cat III with quick coupler 65 CVT 50 PFC/70 PFC 5 0,460 3,785 Cat III with quick coupler 630 CVT 50 PFC/70 PFC 5 0,460 3,785 Standard not available

28 PTO Cylinders / Capacity [cm 3 ] 6 / 6.78 Turbo charger and Intercooler Fuel tank capacity Standard/ Optional/ AdBlue [l] 540/540E/000 or 540E/000/000E PTO speed [rpm] 540E/000 or 000/000E or 540/540E/000/000E Electro-hydraulic available with PTO management,969/,546/,893 or,59/,893/,6 Engine speed [rpm],569/,893 or,893/,700 or,93/,598/,9/,583 PTO shaft profile Front PTO* [rpm] 895 Engine speed 70/330/48 3/8" -spline/ 3/8" 6-spline 70/330/48 3/8" -spline/ 3/8" 6-spline 70/330/48 3/8" -spline/ 3/8" 6-spline 395/ /48 3/8" -spline/ 3/8" 6-spline/ 3/4" 0-spline 395/ /48 3/8" -spline/ 3/8" 6-spline/ 3/4" 0-spline 395/ /48 3/8" -spline/ 3/8" 6-spline/ 3/4" 0-spline 395/ /48 3/8" -spline/ 3/8" 6-spline/ 3/4" 0-spline 395/ /48 3/8" -spline/ 3/8" 6-spline/ 3/4" 0-spline FRONT AXLE/STEERING BRAKES TYRES WEIGHT DELUXE CAB Suspended front axle* Active suspended front axle* Steering system/ steering wheel Hydraulic, load sensing system/ height and level adjustable Steering angle Track width.89 mm [ ] Min. turning radius ) track width.89 mm [m] hydraulic-actuated servo brake discs submerged in oil mechanically-actuated disc brakes on rear axle front axle brake* integrated front axle brake Opti-Stop trailer brake* pneumatic via () lines and/ or hydraulics Standard tyres ) front rear Min. weight [kg]*/ permissible total weight [kg] 480/70R ,800/, /70R38 480/70R ,800/, /70R38 480/70R ,000/, /70R38 600/65R ,300/3, /65R4 600/65R ,300/3, /65R4 Standard equipment: wide steps, easy access, noise in cab 69 db(a), air suspension seat, armrest with ICP (Intuitive Control Panel) and Multicontroller, performance monitor air conditioning, interior lighting, tinted glass, rear window can be opened, roof window, washerwiper system, work lights in roof front and rear, central control console for work lights. 600/65R ,300/3, /65R4 600/65R ,300/3, /65R4 600/65R ,300/3, /65R4 Optional equipment: cab suspension, telescopic rear-view mirror, electric heated, /4 work lights, wiper system for rear window. ) with standard tyres ) alternative tyres available as special equipment 3) ECE R0 corresponds to ISO 4396 and 97/68EC *depending on country-specific legislation and specifications

29 OUR PROFIT. OUR FUTURE. OUR STEYR.

30 Safety first. Before using the equipment please read the operating instructions and ensure that all controls function correctly. Pay special attention to the signs and notices and use the safety appliances fitted for your personal safety. This brochure has been published for international circulation. The availability of individual models and standard/optional equipment may vary from one country to the next. STEYR reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. Whilst every effort is made to ensure that the specifications, descriptions and illustrations in this brochure are correct at the time of going to press, these are also subject to change without prior notice. Illustrations may show optional equipment or may not show all standard equipment. TP0 / SM / 07./ Printed in Austria Cod. n. S0003/DOO A partner company of