FIRE HOSE. NOTE: All Hose Normally Supplied With Couplings Attached.

Transcription

1 FIRE HOSE NOTE: All Hose Normally Supplied With s Attached. SINGLE JACKET HOSE FNCTION: sed with hump racks, reels, hangers and exterior houses for emergency fire protection in most industrial applications. 00 PSI/.6 bars ACCEPTANCE TEST PRESSRE REGLARLY FRNISHED: % synthetic jacket and lining. t u label. as selected by Number AVAILABLE: '/. m, '/.8 m and '/0.4 m lengths OPTIONS: /L Label OPTIONS: NJ Neoprene impregnated jacket OPTIONS: J Polymer impregnated jacket OPTIONS: N Neoprene lining 0 PSI/4. bars ACCEPTANCE TEST PRESSRE REGLARLY FRNISHED: % synthetic jacket and synthetic rubber lining. Designed for greater resistance to many acids, alkalines and other chemicals. sed where working pressures are higher than normal t u label. as selected by Number DOBLE JACKET HOSE 0 lb./. bars ACCEPTANCE TEST PRESSRE /6 4.9 / /6 FNCTION: sed with hump racks, reels, hangers and exterior houses. Double-jacketed hose provides extra protection where abrasion and high pressure are a consideration. REGLARLY FRNISHED: % synthetic double jacket and synthetic rubber lining. t u label. as selected by Number. 9-9 AVAILABLE: '/. m, '/.8 m and '/0.4 m lengths OPTIONS: /L Label VARIATION: J Polymer impregnated jacket /6 4.9 /8. 9 / / /6 RACK AND REEL HOSE 0 lb./ bars ACCEPTANCE TEST PRESSRE POLYFLEX FNCTION: sed with hose rack and reel assemblies. The most compact lined hose available. Replaces unlined linen hose. For interior standpipe use only. REGLARLY FRNISHED: % synthetic jacket and extruded % synthetic lining. t u label. as selected by Number. 97 Page -9 9 & 96 AVAILABLE: '/. m, '/.8 m and '/0.4 m lengths OPTION: /L Label 00 PSI/.6 bars test NOTE: ALWAYS INDICATE HOSE THREAD REQIREMENTS /

2 FIRE HOSE NOTE: All Hose Normally Supplied With s Attached. RBBER COVERED HOSE 400 PSI/7. bars ACCEPTANCE TEST PRESSRE FNCTION: sed for heavy-duty wash down; provides maximum protection against burns, acids and moisture. REGLARLY FRNISHED: % synthetic jacket and synthetic rubber lining with spirallywrapped synthetic rubber outer covering. as selected by Number /6 4.6 / /6 99 AVAILABLE: '/. m length NEOPRENE COVERED HOSE 400 PSI/7. bars ACCEPTANCE TEST PRESSRE FNCTION: sed by the oil and chemical industries when an oil-resistant cover is required. REGLARLY FRNISHED: % synthetic jacket and synthetic rubber lining with spirallywrapped neoprene rubber outer covering. as selected by Number /6 4.6 / /6 9 AVAILABLE: '/. m length RACK AND REEL HOSE 0 PSI/ bars ACCEPTANCE TEST PRESSRE PR SPERFLEX FNCTION: sed with hose rack and reel assemblies where greater service life is required. REGLARLY FRNISHED: % synthetic double jacket and synthetic rubber lining. t u label. as selected by Number. AVAILABLE: '/. m, '/.8 m and '/0.4 m lengths OPTIONS: /L Label /6 4.9 / / POLYMER IMPREGNATION: Imparts excellent weathering properties and resistance to abrasion, heat, oil and ozone. Colors available: Red, Black, Yellow, Orange, Tan, Blue and Green SPECIFY NEOPRENE LINING: Imparts superior resistance to ozone, heat, cold and acids. NOTE: ALWAYS INDICATE HOSE THREAD REQIREMENTS. Page -0

3 FIRE HOSE COPLINGS "/ SINGLE LG COPLING FNCTION: sed with 9 polyflex hose. REGLARLY FRNISHED: Cast brass finish. 6"/4. bowl size. Single pin lug with two expansion rings, two tail gaskets and one swivel gasket. Bowl "/ "/ 90 & Page - OPTIONAL FINISHES: B Polished Brass VARIATION: With Rocker Lug (Suffix RL) DOBLE LG COPLINGS FNCTION: sed with lined fire hose as indicated by bowl size. REGLARLY FRNISHED: Cast brass finish. Bowl size as selected by model number. Double pin lug with two expansion rings, two tail gaskets and one swivel gasket. "/ Bowl "/ "/4.9 "/ Bowl "/ "/7.6 OPTIONAL FINISHES: B Polished Brass VARIATION: With Rocker Lug (Suffix RL) DOBLE LG COPLINGS FNCTION: sed with lined fire hose as indicated by bowl size. REGLARLY FRNISHED: Cast brass finish. Bowl size as selected by model number. Double pin lug with two expansion rings, two tail gaskets and one swivel gasket. "/ Optional Bowl Bowl : Specify 4"/ "/ "/4.6 8"/ "/ "/.9 { 9 6"/6. NOTE: ALWAYS INDICATE HOSE THREAD REQIREMENTS. { "/ Bowl "/ "/7.6

4 STRAIGHT STREAM NOZZLES 9 for "/ hose. Overall length with tip 8 4"/. Tip orifice size "/.. PLAIN NOZZLES FNCTION: sed to project a water stream over greater distances. POLY CARBONATE REGLARLY FRNISHED: "/ x0"/.4 nylon nozzle with "/. tip for "/ hose "/ THREADS AVAILABLE: NST NPSH NYFD NDERWRITERS PLAYPIPE FNCTION: sed to project heavy water streams over greater distances. Provides a readily available means of conducting flow tests from fire pumps. REGLARLY FRNISHED: Cast brass base. Swivel handle and tip with red painted copper pipe. Discharge end threaded LT "/ x 0"/76. with 8"/.8 tip orifice. OPTION: BR Playpipe brackets VARIATION: Tip orifice available "/. through 4"/ SPECIFY: SPECIFY: Base thread SHT-OFF NOZZLES FNCTION: sed to project a water stream over greater distances. Shut-off feature provides control of straight stream at the nozzle. REGLARLY FRNISHED: Cast brass nozzle with polished finish. Quick shut-off handle, rubber bumper and swivel base for "/ hose. Overall length with tip "/9. Tip orifice size "/.. BRASS REGLARLY FRNISHED: Cast brass nozzle with satin finish. as selected by Number. OPTIONAL FINISHES: B Polished Brass Length Tip Orifice 9 for playpipe use. Overall length with tip 0 4"/7.. Threaded LT only. Tip orifice size "/.. / & VARIATION: Tip orifice available. SPECIFY: 4"/.6 through 4"/.9 8"/.9 through 4"/. 8"/.9 through 4"/. 9 OPTIONAL FINISH: 9 STRAIGHT STREAM NOZZLE DISCHARGE DATA PSI Bars at Nozzle.7 bars bars. bars bars /4" /6" /8" /" /8" Nozzle Orifice /4" FLOW IN GPM/lpm 7 /8" " /8" /4" " " NOTE: ALWAYS INDICATE HOSE THREAD REQIREMENTS. Page -

5 FOG NOZZLES ADJSTABLE NOZZLES FNCTION: sed on class A and B fires in most industrial applications, including hose rack and reel assemblies. Adjustments from fog to straight stream to shutoff Page - NYLON WITH BMPER REGLARLY FRNISHED: t u red nylon nozzle with rubber bumper. as selected by Number. THREADS AVAILABLE 99..."/. NST NPSH 9... "/ NYFD CFD "/ BRASS REGLARLY FRNISHED: /L-t u cast brass nozzle with satin finish "/ OPTIONAL FINISHES: B Polished Brass BRASS WITH BMPER REGLARLY FRNISHED: /L cast brass nozzle with satin finish and rubber bumper. as selected by Number. OPTIONAL FINISHES: "/. B Polished Brass "/ "/ 974 For playpipe use (threaded LT only.) ALL-FOG ADJSTABLE NOZZLES FOR ELECTRICAL APPLICATIONS FNCTION: sed on class A, B and C fires. Adjustments from full fog to shutoff with no straight stream position. Suitable for use in electrical hazard areas, at distances of 0 / m and greater, with voltage levels below,000 volts. NYLON WITH BMPER BRASS WITH BMPER REGLARLY FRNISHED: t u red nylon nozzle with rubber bumper "/ THREADS AVAILABLE: NST NPSH NYFD CFD NOTE: ALWAYS INDICATE HOSE THREAD REQIREMENTS. REGLARLY FRNISHED: /L cast brass nozzle with satin finish and rubber bumper "/ OPTIONAL FINISHES: B Polished Brass

6 CONSTANT FLOW FOG NOZZLES BRASS SINGLE GALLONAGE NOZZLES FNCTION: sed on class A and B fires. Adjustments from varying fog patterns to straight stream. Constant flow maintained at PSI/ bars regardless of stream adjustment. REGLARLY FRNISHED: Cast brass nozzle with polished finish. Integral ball shut off with horseshoe handle. Positive grip rubber bumper, swivel base. as selected by Number. GPM OPTIONAL FINISH: "/ /.7 lpm "/ /.7 lpm "/....../ lpm "/....../ lpm ALMINM SINGLE-GALLONAGE NOZZLE FNCTION: sed on class A and B fires. Adjustments from varying fog patterns to straight stream. Constant flow maintained at PSI/ bars regardless of stream adjustment. Suitable for AFFF application (Refer to note below). REGLARLY FRNISHED: Lightweight aluminum nozzle with hard anodized finish. Integral ball shut off with horseshoe handle. Positive grip rubber bumper, swivel base. GPM THREADS AVAILABLE: "/ /9. lpm NST OR NPSH OPTIONAL: / lpm or / lpm Nozzle Position Straight Stream 0 90 Full PSI Bars..... SPECIFY: GPM/lpm ALMINM ADJSTABLE-GALLONAGE NOZZLES FNCTION: sed on class A and B fires. Adjustments from varying fog patterns to straight stream. Selected gallonage maintained at PSI/ bars regardless of stream adjustment. Suitable for AFFF application (Refer to note below). REGLARLY FRNISHED: Lightweight aluminum alloy nozzle with hard anodized finish. Integral ball shut off with horseshoe handle. Positive grip rubber bumper, swivel base. Gallonage adjustments for "/ nozzle of 0/. lpm, / lpm, 9/9. lpm, / lpm. "/ nozzle /67.8 lpm, 0/7 lpm, and / lpm GPM. (For selection refer to chart below.) For use with "/, 4"/4., "/ "/ and "/ hose lines "/ size with integral pistol grip. THREADS AVAILABLE: NST or NPSH 998 "/ size with integral pistol grip. NOTE on AFFF: When used for aqueous film forming foam (AFFF) application, nozzle Numbers 99, 996, 997, and 998 must be used with an eductor of equal gallonage rating. Contact Potter-Roemer for application assistance. Nozzle Number GPM Adj , ' Gallons Per M/Liters Per M Section NOTE: ALWAYS INDICATE HOSE THREAD REQIREMENTS. Page -