VENTED WATER FITTINGS

Size: px

Start display at page:

Download "VENTED WATER FITTINGS"

Dora Dickerson
6 years ago
Views:

1 By Appointment to Her Majesty Queen Elizabeth II Manufacturer of Kitchen & Bathroom Taps & Mixers Barber Wilsons & Co. Ltd. VENTED WATER FITTINGS FOR USE WITH GEYSER TYPE INSTALLATIONS

Vented Taps for use with geyser type installations Regent (R) Regent with ceramic disc (RCD) Mastercraft (MC) 890 s (GA) 890 s with ceramic disc (GCD) Regent with china lever handles (RFC)

If a conventional tap were connected to such a water heater, a dangerous and potentially explosive situation could develop should the water heater malfunction and overheat.

Barber Wilsons is aware that there is a need for a range of luxury taps and mixers for installations of this nature where a top of the market appearance is required.

They are also easily serviceable when necessary and are fitted with state of the art internals.

An alternative to this style is the Regent (R) range with easyclean shrouded head parts.

2 Vented Taps for use with geyser type installations Regent (R) Regent with ceramic disc (RCD) Mastercraft (MC) 890 s (GA) 890 s with ceramic disc (GCD) Regent with china lever handles (RFC) Contemporary Q range Lever (HEC-HFC) Under-sink single point water heaters require taps with open atmosphere outlets known as vented taps. If a conventional tap were connected to such a water heater, a dangerous and potentially explosive situation could develop should the water heater malfunction and overheat. Vented taps control the flow of water to the inlet of the water heater rather than from the outlet. Barber Wilsons is aware that there is a need for a range of luxury taps and mixers for installations of this nature where a top of the market appearance is required. All of the taps and mixers in this brochure come from our standard catalogue and have been specially adapted to meet this criterion. They are also easily serviceable when necessary and are fitted with state of the art internals. Styles available: The 890s (GA) range has the original exposed top works, with traditional rubber tap washers. An alternative to this style is the Regent (R) range with easyclean shrouded head parts. The code numbers for the Regent range are the same as the 890 s range but are prefixed with the letter R instead of GA. For most Regent and GA styles we can now supply ceramic disc headworks. Regent ceramic disc (RCD) and GA ceramic disc (GCD). These give traditional styling with state of the art ceramic disc internals. The Mastercraft (MC) range is based on our original 930 s design and incorporates a stylish Art Deco theme of hexagonal capstans, shrouds and spouts. Again, the code numbers are the same as the 890 s range but are prefixed with the letters MC instead of GA. Mastercraft is not available with ceramic disc headworks. Throughout this catalogue taps which are available with ceramic discs are labelled with the suffix CD.

223G (GA shown) Also available R GCD RCD 2" basin taps with 3" nose.

00 223G 224G 75 (3 ) 00 (4 ) Ordering 30 (5 /8 ) Style Item code Order code

Ceramic Disk GCD: 890s with Ceramic Disk MC: Mastercraft FLANGE 48( 7 /8 )

3 223G (GA shown) Also available R GCD RCD 2" basin taps with 3" nose. 224G (GA shown) 2" basin taps with 4" nose. Chrome/Nickel Inca G 224G 75 (3 ) 00 (4 ) Ordering 30 (5 /8 ) Style Item code Order code format: RCD 223G NI 3 Style options: GA: 890s R: Regent RCD: Regent with Ceramic Disk GCD: 890s with Ceramic Disk MC: Mastercraft FLANGE 48( 7 /8 ) DIA /8 BSP HOLE 30( 3 /6 ) 20 ( 3 /4 ) 63 (2 /2 ) SHANK options: CP: Chrome NI: Nickel IB: Inca 223/4G

225G (GA shown) 2" basin taps with 5" nose for use with inset basins. Chrome/Nickel 263.00 Inca 39.

Each (Ex VAT) GA R GCD RCD Chrome/Nickel 39.00 Inca 399.00 RFC HFC HEC Chrome/Nickel 390.00 Inca 472.

4 225G (GA shown) 2" basin taps with 5" nose for use with inset basins. Chrome/Nickel Inca G 020G RFC shown Also available GA R GCD RCD Mixer for fitting into work surface at a fixed centres of 203mm. Each (Ex VAT) GA R GCD RCD Chrome/Nickel Inca RFC HFC HEC Chrome/Nickel Inca G 25 (5 ) 200 (8 ) FIXED 4 30 (2 /2 ) 20 ( 3 /4 ) 425 (6 3 /4 ) FLANGE 48 ( 7 /8 ) DIA 25 (8 /2 ) HOLE 30 ( 3 /6 ) 25 (5 ) 275 (0 3 /6 ) HOLE 22DIA FROM TO 225G 020G

Q2-224G Basin pillar tap. Chrome/Nickel 340.

Q2 224G Q2-6455G 40mm nozle 3 Hole basin mixer with pop-up-waste.

00 Also available Q2-645G 5mm nozle 3 Hole basin mixer without pop-up-waste.

5 Q2-224G Basin pillar tap. Chrome/Nickel Q2-6450G 5mm nozle 3 Hole basin mixer with pop-up-waste. Q2 224G Q2-6455G 40mm nozle 3 Hole basin mixer with pop-up-waste. Set (Ex VAT) Chrome/Nickel Also available Q2-645G 5mm nozle 3 Hole basin mixer without pop-up-waste. Q2-6455G Q2-6450G Q2-6456G 40mm nozle 3 Hole basin mixer without pop-up-waste. Set (Ex VAT) Chrome/Nickel (4 ) HOLE 22 (2 9 /6 ) 65 (2 9 /6 ) 25 (4 5 /6 ) 3 HOLES 29 ( 3 /6 ) HOT 4/40 PROJECTION (4 /2-5 /2 ) COLD 5 45 FLEXIBLE HOSE 300 MAX (2 ) Q 224G Q6450/5G

6450G 6450G GA shown Also available R RCD GCD 3-hole basin mixer with pop-up waste, 5mm nozzle. 6455G As above but with 40mm nozzle.

Single check valves are incorporated in the hot and cold inlets to comply with water byelaw 25.IRN 0 (see page 7 for dimension drawing).

Each (Ex VAT) Chrome/Nickel 450.00 Inca 494.00 MC6454G Wall mounted basin mixer. Each (Ex VAT) Chrome/Nickel 400.00 Inca 438.

6 6450G 6450G GA shown Also available R RCD GCD 3-hole basin mixer with pop-up waste, 5mm nozzle. 6455G As above but with 40mm nozzle. 6453/8G GA shown Also available R GCD RCD 2" pillar sink mixer with swivel nozzle. NB. Mixers have single flow nozzles fitted with an aerator. Single check valves are incorporated in the hot and cold inlets to comply with water byelaw 25.IRN 0 (see page 7 for dimension drawing). Each (Ex VAT) Chrome/Nickel Inca MC6450G 3-hole basin mixer with pop-up waste 2mm nozzle. MC6455G As above but with 40mm nozzle. Each (Ex VAT) Chrome/Nickel Inca MC6454G Wall mounted basin mixer. Each (Ex VAT) Chrome/Nickel Inca MC6450G MC6455G 6453/8G 6 29 HOLE ( 3 /6 ) HOT 50 (6 ) MIN (0 ) MAX 4/40 PROJECTION (4 /2-5 /2 ) COLD 40 MAX ( 9 /6 ) 3 HOLES 29 ( 3 /6 ) HOT 75 MIN (3 ) 4/40 PROJECTION (4 /2-5 /2 ) COLD 34 HOLE ( 5 /6 ) FLEXIBLE HOSE FLEXIBLE HOSE 300 MAX (2 ) 300 MAX (2 ) 6450G MC6450G

HFC 03G - 3" Lever HEC 03G - 6" Lever Basin Pillar Taps 2" Inlet Chrome/Nickel 234.

00 HFC 06G 75 (3 ) 50 (6 ) 75 (3 ) 50 (6 ) 50mm (6 ) 3 HOLES 29 ( 3 /6 ) HOT COLD 37mm (5 3 /8 )

7 HFC 03G - 3" Lever HEC 03G - 6" Lever Basin Pillar Taps 2" Inlet Chrome/Nickel HEC 03G HFC 06G - 3" Lever HEC 06G - 6" Lever Sink Pillar Taps 2" Inlet Chrome/Nickel HFC 06G 75 (3 ) 50 (6 ) 75 (3 ) 50 (6 ) 50mm (6 ) 3 HOLES 29 ( 3 /6 ) HOT COLD 37mm (5 3 /8 ) 260mm (0 /4 ) 85 (3 3 /8 ) 38 ( /2 ) 5 (4 /2 ) 00 (4 ) 50 (6 ) MIN (0 ) MAX FLEXIBLE HOSE 6453G (previous page) HFC 03G HFC 06G

8 Barber Wilsons & Co Ltd Crawley Road Westbury Avenue Wood Green London N22 6AH Tel +44 (0) Fax +44 (0)

BATHROOM TAPS CONTEMPORARY

BATHROOM TAPS CONTEMPORARY Designed for today s lifestyles and built to last, this excellent collection of contemporary taps and mixers has it all. Ranges include features such as ceramic discs and new Enviro-Klick technology. LINX