H Series Two Valve Manifolds. Catalog 4190-PM

Size: px

Start display at page:

Download "H Series Two Valve Manifolds. Catalog 4190-PM"

Angelica Bridges
5 years ago
Views:

1 H Series Two Valve Manifolds Catalog 4190-PM aerospace climate control electromechnical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

2 Contents Page 3 Introduction Page 4/5 Valve assembly details Page 6/7 Remote mount static pressure manifolds Page 8/9 High pressure remote manifolds Page 10/11 Direct mount static pressure manifolds Page12/13 Page 14 B31.1 compliant power plant manifolds Page 15 PTFree connections Page 16/17 Mounting brackets Page 18 Materials Page Spares kits and options eries Two Valve erial options Material Function Optio HL*2V HL*28M8F4F HL*2HVSDLH HD*2HLHCP part number page 6 page 6 page 10 HAL*2V HL*2VTF HL*3DBB *Insert code for selected material in page 6 and packing Graphoil 3 eating PCTFE (207 bar/3000 psi) 9 PEEK PK Note 1 Rising plug valve style PTFE packed RP Stellite tip ST Plug/Bleed valve (supplied loose in box) Blank plug 1/4 NPT P Bleed valve 1/4 NPT BV Connection and bolting Note 2 Socket weld (* insert pipe size) SW*NB Note 2 Butt weld (* insert pipe size) BW*NB Note 3 DIN sealing grooves DIN BSPT (*insert pipe size (e.g. 8K = 1/2 ) *K Note 4 BSPP (*insert pipe size (e.g. 8R = 1/2 ) *R St. St. Mounting bolts SSB M10 x 1.5 CS Mounting bolts CSB10 M10 x 1.5 St. St. Mounting bolts SSB10 Front face drain 1/4 NPT FFD Bolts for 3051 inclusive fl ange CSBCP for tubing See below THL AT ATK HW W gauge outlet (**insert size/thread N=NPT) **SG H Page 21 Complementary Products 2

Introduction In addition to manufacturing manifolds Parker also produce a comprehensive range of single and twin ferrule high integrity of materials these products are used thread sealant materials

3 Introduction In addition to manufacturing manifolds Parker also produce a comprehensive range of single and twin ferrule high integrity of materials these products are used thread sealant materials which often tested connections will ensure improved Continuous product development may from time to time necessitate changes in the WARNING FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. Offer of Sale 3

4 Standard manifold globe style bonnet design 1. POSITIVE HANDLE RETENTION DESIG 2. T BAR 4. GLAND PACKING ADJUSTER 6. VALVE BONNET 8. THRUST BUSH 10. BONNET/BODY WASHER For safe reliable and repeatable performance 3. DUST CAP 5. GLAND ADJUSTER LOCK NUT 7. ANTI BLOWOUT SPINDLE 9. GLAND PACKING (ADJUSTABLE) 11. SPINDLE TIP Specification Pressure vs Temperature Pressure psi (bar) 10,000 (690) 8,000 (552) 6,000 (413) 4,000 (275) 2,000 (138) 0 A B C A - A Graphoil packing A - B PTFE packing B - B 6000psi (414 bar) standard PTFE packing B - C 6000 psi (414 bar) standard Graphoil packing A - D PEEK tip C - E PCTFE tip E D B C A (32) (212) (392) (572) (752) (932) Temperature C ( F) 4 Features Panel mounting Bonnet locking pin to prevent accidental removal Alternative graphoil packing for high temperature washout All valves 100% factory tested

5 Optional manifold globe style bonnet design H Series Two Valve Manifolds For on-site assembly For factory fitted assembly Example HL*2VATDR Example HL*2VHWISTHLDR Standard bonnet T bar handle locking Anti tamper spindle Handwheel *Panel mounting B31.1 Compliant HW Lockable handwheel 5

6 Remote mount static pressure manifolds Purpose HL*2VTF HL*2V HL*2HVSDLH Instrument Test/Drain Process HAL*2V this group of manifolds HL*28M8F4F Instrument double block and bleed manifolds Instrument Instrument p t Test/drain Process HL*3DBB Drain Process HL*3DBB1 6

7 Remote mount static pressure manifolds H Series Two Valve Manifolds 69.8 (2.75") (2.50 ) 85.0 (3.35 ) 50.8 (2.00 ) (2.00") (6.00") (6.00 ) (1.13 ) 31.8 (1.25") HL*2V (2.00 ) 79.4 (1.13 ) (3.13 ) 78.8 HL*2VTF 69.8 (2.75") (2.50 ) 73.0 (2.88 ) (2.88") 50.8 (2.50") (2.00 ) (4.50") (3.96 ) HAL*2V (1.13 ) 79.4 (3.13 ) 50.8 (2.00") (2.00 ) (6.00") (6.00 ) HL*28M8F4F (1.13") (1.13 ) 50.8 (2.00") (2.00 ) (4.00 ) (4.00") HL*2HVSDLH (1.13") (1.13 ) 79.4 (3.13") (3.13 ) (2.50 ) (2.50") 88.9 (3.50 ) (5.84 ) (1.13 ) HL*3DBB (4.00 ) 50.8 (2.00 ) HL*3DBB1 Standard product specification: Standard range part numbers Standard connections Part No. Inlet (NPT) ) Outlet (NPT) Bleed/test (NPT) ) HL*2V 1/2 female 1/2 female 1/4 female HAL*2V 1/2 female 1/2 female 1/4 female HL*2HVSDLH 1/2 female 1/2 female 1/4 female HL*2VTF 1/2 female 1/2 female 1/4 female HL*28M8F4F 1/2 male 1/2 female 1/4 female HL*3DBB 1/2 female 1/2 female 1/4 female HL*3DBB1 1/2 female 1/2 female 1/4 female Function Specification Features Alternative materials of construction 7

8 High pressure 10,000 psig (689 barg) two valve manifolds Purpose Test/Drain Process HL*2VHP this group of products HAL*2VHP HL*28M8F4FHP Instrument double block and bleed manifolds p t Test/drain Process Test/Drain Process HL*S3DBBHP HL*3DBB1HP 8

9 High pressure 10,000 psig (689 barg) two valve manifolds 69.8 (2.75") (2.75 ) 69.8 (2.75") (2.75 ) 50.8 (2.00") (2.00 ) (6.00") (6.00 ) 31.8 (1.25") (1.25 ) (2.50 ) (2.50") (4.50 ) (4.50") 31.8 (1.25") (1.25 ) HL*2VHP HAL*2VHP 76.2 (3.00 ) (3.00") 57.2 (2.25") (2.25 ) (4.25") (4.25 ) 50.8 (2.00 ) (2.00") (6.00 ) (6.00") HL*8M8F4FHP 31.8 (1.25 ) (1.25") 88.9 (3.50") (3.50 ) (5.85 ) (5.85") HL*3DBBHP 31.8 (1.25") (1.25 ) HL*3DBB1HP Standard product specification: self centering Standard range part numbers Standard connections Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT) HL*2VHP 1/2 female 1/2 female 1/4 female HAL*2VHP 1/2 female 1/2 female 1/4 female HL*28M8F4FHP 1/2 male 1/2 female 1/4 female HL*3DBBHP 1/2 female 1/2 female 1/4 female HL*3DBB1HP 1/2 female 1/2 female 1/4 female Function Specification Features 9

10 Direct mount static pressure manifolds Purpose HD*2EXT HD*2HLHFF Instrument Test/drain Process HEF*2LH this group of products HD*2HLH HEF*2LH8N HD*2HLHCP

11 Direct mount static pressure manifolds H Series Two Valve Manifolds (5.73") (5.73 ) (4.50") (4.00 ) (4.24 ) (4.24") (2.50") (2.50 ) HD*2EXT (2.50") (2.50 ) (4.50") (4.50 ) (1.50") 38.1 (1.50 ) (2.50") (2.50 ) (4.50") (4.50 ) HD*2HLHFF (1.13") (1.13 ) 62.0 (2.44) (2.44 ) 96.4 (3.80") (3.80 ) (4.24") (4.24 ) (2.50") (2.50 ) (5.88 ) 98.5 (3.88") (3.88 ) (5.88) 95.8 (3.18") HEF*2LH 31.8 (1.25") (1.25 ) 95.8 (3.18 ) 62.0 (2.44) (2.44 ) (2.50") (2.50 ) (4.50") (4.50 ) HD*2HLH (1.13") (1.13 ) (4.00") (4.00 ) (4.24") (4.24 ) (2.50") (2.50 ) 98.5 (3.88") (1.50 ) (5.88) (5.88 ) Standard specification: Standard range part numbers *Insert material designator Function HEF*2LH8N 80.7 (3.18") (3.18 ) 31.8 (1.25") (1.25 ) Standard connections Part No. Inlet (NPT) Outlet Drain/bleed HD*2EXT 1/2 female Flanged 1/4 female HEF*2LH Flanged Flanged 1/4 female HEF*2LH8N 1/2 female Flanged 1/4 female HD*2HLHFF Flanged Flanged 1/4 female HD*2HLH 1/2 female Flanged 1/4 female HD*2HLHCP 1/2 female Flanged 1/4 female (4.33") (4.33 ) (6.33") (6.33 ) HD*2HLHCP (1.13") (1.13 ) Specification Features

12 Flanged connected static pressure manifolds Purpose Instrument Test/drain Process HL*2V1KFMB Drain/bleed Drain/bleed Process HL*2V2KFMB

13 Standard dimensions (2.50 ) (2.50") (3.94") (3.94 ) L*2V1KFMB (3.94") (3.94 ) (5.61") (5.61 ) (1.13 ) (1.13") 79.4 (3.13") (3.13 ) (4.16") (4.16 ) (3.94") (3.94 ) (2.50") (2.50 ) L*2V2KFMB (6.61") (6.61 ) (9.99") (9.99 ) (1.13") (1.13 ) 79.4 (3.13") (3.13 ) Standard product specification: Standard range part numbers Standard connections Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT) L*2V1KFMB 2 x 1/2 female 1 x Flanged x 1/2 female 1/4 female L*2V2KFMB 1/2 female 2 x Flanged x 1/2 female 1/4 female *Insert material designator Function Specification Features service

Power plant products - compliant with ANSI B31.

Pressure vs temperature Features All valves are graphite

Plus a range of manifolds: 7000 (483) 6000 (414) 5000 (345)

C) 0 100 200 300 400 500 600 700 800 900 1000 (-18) (38)

14 Power plant products - compliant with ANSI B31.1 H Series Hand valves & manifolds Pressure psi (bar) Pressure vs temperature Features All valves are graphite packed for high temperature service Back seat design 316 SS Plus a range of manifolds: 7000 (483) 6000 (414) 5000 (345) 4000 (276) 3000 (207) 2000 (138) 1000 (69) 0 Temperature F ( C) (-18) (38) (93) (149) (204)(260) (316) (371) (427) (482) (538) Part numbering & Product range offered:

15 PTFree connect ª Manifold connections A A A = 29.70mm (1.17 ) 6mm/1/4 tube A = 35.00mm (1.38 ) 10mm tube A = 35.00mm (1.38 ) 3/8 tube A = 31.50mm (1.25 ) 6mm/1/4 tube A = 36.60mm (1.44 ) 10mm tube A = 36.60mm (1.44 ) 3/8 tube PTFree connect ª (Code FRC) PTFree male connectors (Code FRCM) Part Number Construction Examples Manifold Connection Style A-LOK (L) or Metric or inch Part No. + option FRC or FRCM CPI (B) L or B tube M or I Inlet, Outlet, Drain/vent/test, tube size/thread size & form Inlet (E) + size Outlet (X) + size Drain/vent/test HLS2V FRC L M E12 X12 D6 Part No. HLS2VFRCLME12X12D6 = 2 valve manifold with all A-LOK PTFree connect ª Inlet 12mm, Outlet 12mm Drain/vent/test 6mm. Stainless steel standard construction HALS2V FRCM B I E6 X6 D4N Part No. HALS2VFRCMBIE6X6D6N = 2 valve manifold with CPI PTFree male connector Inlet 3/8 o.d, Outlet 3/8 o/d Drain/vent/test 1/4 NPT. Stainless steel standard construction

Manifold bracket support Purpose Part No.

85") 69.5 71.0 (2.74 ) (2.80") 90.0 (3.54 ) (3.

0 (0.41") MTG. HOLES Part No. BKT2CS 30.0 24.

54") (2.80") (3.54 )(2.74 ) 4-Off Ø8.5 (0.

16 Manifold bracket support Purpose Part No. BKT1CS (1.18 ) (0.94") (1.85 ) (1.85") (2.74 ) (2.80") 90.0 (3.54 ) (3.54") 2-Off Ø10.0 (0.41 ) Mtg. holes 2-OFF ÿ10.0 (0.41") MTG. HOLES Part No. BKT2CS (0.94") (1.18 ) with B (3.54") (2.80") (3.54 )(2.74 ) 4-Off Ø8.5 (0.34 ) Mtg. holes (2.80") (2.74 ) (3.54") 90.0 (3.54 )

Manifold bracket support Part No. BKT3CS Suitable for: - HD*2HLH HD*2HLHCP HD*2HLHFF with B 35.0 (1.

71 ) 4-Off Ø8.5 (0.34 ) Mtg. holes 10.0 (0.39") 10.0 (0.39 ) Part No.

54") U Bolt with nuts & washers for 2 NB standpipe Part No. UBACS 69.5 71.0 (2.80") (2.74 ) 69.5 71.0 (2.80") (2.74 ) (3.

45 Bolt BS1 1 HL*2VTF M5 x 45 Bolt BS1 1 HL*3DBB M10 x 14 Bolt BS2 2 HL*3DBB1 M10 x 14 Bolt BS2 2

17 Manifold bracket support Part No. BKT3CS Suitable for: - HD*2HLH HD*2HLHCP HD*2HLHFF with B 35.0 (1.38") (1.38 ) (2.80") (2.74 ) (2.80") (2.74 ) 90.0 (3.54") (3.54 ) (5.71") (5.71 ) 4-Off Ø8.5 (0.34 ) Mtg. holes 10.0 (0.39") 10.0 (0.39 ) Part No. BKT4CS Suitable for: - HEF*2LH8N HEF*2LH with B 67.0 (2.64") 67.0 (2.64") (2.64 ) 85mm 90.0 (3.54") U Bolt with nuts & washers for 2 NB standpipe Part No. UBACS (2.80") (2.74 ) (2.80") (2.74 ) (3.54 ) (4.72") (4.72 ) 4-Off Ø8.5 (0.34 ) Mtg. holes Manifold/bracket bolts c/w nuts and washers. Manifold Part No. Bolt Set Part No. Suffix HL*2V M5 x 45 Bolt BS1 1 HAL*2V M5 x 45 Bolt BS1 1 HL*28M8F4F M5 x 45 Bolt BS1 1 HL*2HVSDLH M5 x 45 Bolt BS1 1 HL*2VTF M5 x 45 Bolt BS1 1 HL*3DBB M10 x 14 Bolt BS2 2 HL*3DBB1 M10 x 14 Bolt BS2 2 HD*2HLH M6 x 14 Bolt (1-OFF) M10 x 14 Bolt (1-OFF) BS3 3 HD*2HLHFF M6 x 14 Bolt (1-OFF) M10 x 14 Bolt (1-OFF) BS3 3 HD*2HLHCP M10 x 14 Bolt (2-OFF) BS2 2 HEFS2LH M6 x 45 Bolt BS4 4 HEFS2LH8N M6 x 45 Bolt BS4 4

18 Material options Manifold types HL*2V HL*28M8F4F HL*2HVSDLH HD*2HLHFF Material *Insert code for selected HAL*2V HL*2VTF HL*3DBB HD*2HLHCP material in part number page 6 page 6 page 6 page 10 Stainless steel Std S Monel M Duplex D1 Super Duplex D2 Hasteloy HC Carbon Steel C 6Mo 6MO Titanium T Incoloy Inconel All non-wetted parts ie those not in contact with the process medium will be supplied in stainless steel. High pressure versions can be supplied in any of the above materials. Manifold types HEF*2LH HD*2EXT HL*2V1KFMB Material *Insert code B31.1 compliant for selected HEF*2LH8N HD*2HLH HL*2V2KFMB Power Plant material in part number page 10 page 10 page 12 page 14 Stainless steel Std S Monel M Duplex D1 Super Duplex D2 Hasteloy HC Carbon Steel C 6Mo 6MO Titanium T Incoloy Inconel All non-wetted parts ie those not in contact with the process medium will be supplied in stainless steel.

19 Page 6/7 Available options HL*2V+HP Suffix adding sequence Function Option Detail Part No. suffix HAL*2V+HP Swivel gauge outlet (**insert size/thread N=NPT) **SG 5 6 Connection size for tubing See below 7 8 Gland packing Graphoil 3 Seating PCTFE (207 bar/3000 psi) 9 PEEK PK Note 1 Rising plug valve style PTFE packed RP Stellite tip ST Plug/Bleed valve (supplied loose in box) Blank plug 1/4 NPT P Bleed valve 1/4 NPT BV Connection and bolting Note 2 Socket weld (* insert pipe size) SW*NB Note 2 Butt weld (* insert pipe size) BW*NB Note 3 DIN sealing grooves DIN BSPT (*insert pipe size (e.g. 8K = 1/2 ) *K Note 4 BSPP (*insert pipe size (e.g. 8R = 1/2 ) *R St. St. Mounting bolts SSB M10 x 1.5 CS Mounting bolts CSB10 M10 x 1.5 St. St. Mounting bolts SSB10 Front face drain 1/4 NPT FFD Bolts for 3051 inclusive flange CSBCP Operating mechanism Lockable T bar THL (See page 5 for details) Anti tamper spindle AT Anti tamper spindle & key ATK Handwheel HW Lockable handwheel LHW Mounting Note 5 Assembled to bracket BRK Condition NACE (latest issue) NACE Cleaned and lubricated for oxygen use OXY Firesafe FS Note 6 Heat code trace certificates HCT Test certificates TC Air testing PT Note 1 Seat material RP=standard acetal, RP9 = PTCFE, RPPK = PEEK. Note 2 For tube socket or tube butt weld use 1/16 inch denominations and change NB to TB. For metric tube size use actual metric (mm) dimensions e.g. SW12MMTB. Note 3 Insert seal type B1, B2, B3. Note 4 For BSPP connections drain/bleed will be 1/8 BSPP. Note 5 Bracket will include U bolt & manifold/bracket bolts. Note 6 Heat code traceable certificates for body and bonnet. Ac an 19

20 6/7 10/11 10/11 10/11 12/13 14 H Series Two Valve Manifolds HL*2HVSDLH HEF*2LH HD*2EXT HD*2HLHFF HL*2VIKFMB HL*3DBB/1+HP HEF*2LH8N HD*2HLH HD*2HLHCP HL*2V12KFMB B31.1 compliant Power Plant Option Detail STD Graphite PCTFE PEEK Rising plug valve style PTFE packed Stellite tip Blank plug 1/4 NPT Bleed valve 1/4 NPT Socket weld *insert pipe size Butt weld * insert pipe size DIN sealing grooves BSPT (*insert pipe size (e.g. 8K = 1/2 ) BSPP * pipe size (e.g. 8R = 1/2 ) St. St. Mounting bolts M10 x 1.5 CS Mounting bolts M10 x 1.5 St. St. Mounting bolts Front face drain 1/4 NPT Bolts for 3051 inclusive flange Swivel gauge outlet (**insert size/thread N=NPT) See below Lockable T bar Anti tamper spindle Anti tamper spindle & key Handwheel Lockable handwheel Assembled to bracket NACE (latest issue) Cleaned and lubricated for oxygen use Firesafe Heat code trace certificates Test certificates Air testing sories pares Description Part number Box Quantity PTFE manifold/instrument seals HKITPTFESEALS 2 Graphoil manifold/instrument seals HKITGRAPHOILSEALS 2 Isolate valve with PTFE gland, metal seat HBNTS*ISPTFE 1 Drain/bleed valve with PTFE gland,m metal seat HBNTS*DRPTFE 1 Isolate valve with graphoil gland, metal seat HBNTSISGRAP 1 Drain/bleed valve with graphoil gland, metal seat HBNTSDRGRAP 1 *Insert 9 for PCTFE seat *Insert PK for PEEK 20

21 Parker Instrumentation now offers a wide range of complimentary products. Pressure Gauge Accessories Diaphragm Seals Mechanical Pressure Measurement Condensate Pots Electrical Temperature Measurement Parker grade tubing Please contact the Instrumentation division or one of our many distributors for more information on our range of complimentary products. 21

22 Parker Worldwide AE Ð UAE, Dubai Tel: parker.me@parker.com AR Ð Argentina, Buenos Aires Tel: AT Ð Austria, Wiener Neustadt Tel: +43 (0) parker.austria@parker.com AT Ð Eastern Europe, Wiener Neustadt Tel: +43 (0) parker.easteurope@parker.com AU Ð Australia, Castle Hill Tel: +61 (0) AZ Ð Azerbaijan, Baku Tel: parker.azerbaijan@parker.com BE/LX Ð Belgium, Nivelles Tel: +32 (0) parker.belgium@parker.com BR Ð Brazil, Cachoeirinha RS Tel: BY Ð Belarus, Minsk Tel: parker.belarus@parker.com CA Ð Canada, Grimsby, Ontario Tel ipd_canada@parker.com CH Ð Switzerland, Etoy Tel: +41 (0) parker.switzerland@parker.com CN Ð China, Shanghai Tel: CZ Ð Czech Republic, Klecany Tel: parker.czechrepublic@parker.com DE Ð Germany, Kaarst Tel: +49 (0) parker.germany@parker.com DK Ð Denmark, Ballerup Tel: parker.denmark@parker.com ES Ð Spain, Madrid Tel: parker.spain@parker.com FI Ð Finland, Vantaa Tel: +358 (0) FR Ð France, Contamine s/arve Tel: +33 (0) parker.france@parker.com GR Ð Greece, Athens Tel: parker.greece@parker.com HK Ð Hong Kong Tel: HU Ð Hungary, Budapest Tel: parker.hungary@parker.com IE Ð Ireland, Dublin Tel: +353 (0) parker.ireland@parker.com IN Ð India, Mumbai Tel: IT Ð Italy, Corsico (Ml) Tel: parker.italy@parker.com JP Ð Japan, Fujisawa Tel: +(81) KR Ð South Korea, Seoul Tel: KZ Ð Kazakhstan, Almaty Tel: parker.easteurope@parker.com LV Ð Latvia, Riga Tel: parker.latvia@parker.com MX Ð Mexico, Apodaca Tel: MY Ð Malaysia, Shah Alam Tel: NL Ð The Netherlands, Oldenzaal Tel: +31 (0) parker.nl@parker.com NO Ð Norway, Stavanger Tel: +47 (0) parker.norway@parker.com NZ Ð New Zealand, Mt Wellington Tel: PL Ð Poland, Warsaw Tel: +48 (0) parker.poland@parker.com PT Ð Portugal, Leca da Palmeira Tel: parker.portugal@parker.com RO Ð Romania, Bucharest Tel: parker.romania@parker.com RU Ð Russia, Moscow Tel: parker.russia@parker.com SE Ð Sweden, Spånga Tel: +46 (0) parker.sweden@parker.com SG Ð Singapore, Tel: SK Ð Slovakia, Banská Bystrica Tel: parker.slovakia@parker.com SL Ð Slovenia, Novo Mesto Tel: parker.slovenia@parker.com TH Ð Thailand, Bangkok Tel: TR Ð Turkey, Istanbul Tel: parker.turkey@parker.com TW Ð Taiwan, Taipei Tel: UA Ð Ukraine, Kiev Tel: parker.ukraine@parker.com UK Ð United Kingdom, Barnstaple Tel: +44 (0) parker.uk@parker.com US Ð USA, Cleveland Tel: VE Ð Venezuela, Caracas Tel: ZA Ð South Africa, Kempton Park Tel: +27 (0) parker.southafrica@parker.com Instrumentation Products Division Europe, Riverside Road, Pottington Business Park, Barnstaple, Devon, EX31 1NP United Kingdom Tel.: +44 (0) Fax: +44 (0) Instrumentation Products Division 1005 A Cleaner Way Huntsville, AL Tel: + 1 (256) Fax: + 1 (256) Catalogue 4190-PM

H Series Two Valve Manifolds. Catalog 4190-PM June 2002

H Series Two Valve Manifolds. Catalog 4190-PM June 2002 H Series Two Valve Manifolds Catalog 4190-PM June 2002 'H' Series Two Valve manifolds Contents Page 3 Introduction Page 4/5 Valve assembly details Page 6/7 Remote mount static pressure manifolds Page 8/9