BOUTIQUE ENVISION MODULE

Transcription

1 BOUTIQUE ENVISION MODULE CODE # CVL-ENVDISPLAY ASSEMBLY INSTRUCTIONS AGI 04.13

2 RECOMMENDED TOOLS SAFETY GUIDELINES CORDLESS POWER DRILL 4MM HEX KEY 4MM HEX BIT Failure to follow the assembly directions could result in damage or injury. Install in a level and stable location. If not on a level surface please level before final installation. Assemble display in the area it will occupy. Never attempt to move display after loading When using any power tools, always use eye protection. Do not work on this display with product in it. Unload display before relocating unit. Failure to do this may result in damage or injury Two people required to set up display. Be sure to provide a minimum of to install this display. Display Footprint: W x 23.5 D x 88.5 H HAND TIGHTEN ALL FASTENERS DURING ASSEMBLY. WHEN ASSEMBLY IS COMPLETED USE APPROPRIATE TOOLS TO SECURE ALL FASTENERS PERMANENTLY. For proper installation and safety follow all steps in sequential order. For customer assistance call to speak with a customer representative.

3 PARTS - CARTON #1 of 3 Base Front Panel Back Panel For customer assistance call to speak with a customer representative.

4 PARTS - CARTON #2 of 3 Header Platform Catalog Pocket Binder Pocket Small Tray Mat Large Tray Mat Shelf Tray Mat For customer assistance call to speak with a customer representative.

5 PARTS - CARTON #3 of 3 Bar Step Small Tray Large Tray Left Leg Right Leg Left Decorative Leg Right Decorative Leg Shelf Kick Panel Crossbar Top Crossbar For customer assistance call to speak with a customer representative.

6 HARDWARE 60mm Power Coated 40mm Power Coated 18x White 6x 8x 20mm 3x #10 x 2 Black #10 x x Leveler #10 x.625 4mm Hex Key 1/4-20 x 1/2 Button HD Screw 1/4-20 x 2 10x 1/4-20 x 1.5 FH Screw - Black #10 x.75 FH Screw - 1 For customer assistance call to speak with a customer representative.

7 Step 1 LEFT LEG KEEP ON BACK DURING THIS STEP RIGHT LEG Leveler CROSSBAR Crossbar Left Leg Right Leg Leveler

8 Step 2 5x #10 x 1.25 KEEP ON BACK DURING THIS STEP TWO PEOPLE REQUIRED 1/4-20 x 1.5 FH Screw - Black HEADER FRONT PANEL Front Panel Header #10 x x 1/4-20 x 1.5 FH Screw - Black BE CAREFUL TO PROTECT THE CORNERS DURING ASSEMBLY

9 Step 3 #10 x.625 KEEP ON BACK DURING THIS STEP KICK PANEL TWO PEOPLE REQUIRED TABS ON KICK PANEL TO FIT INSIDE LEGS KICK PANEL BASE BASE SHOWN UPSIDE DOWN IN THIS VIEW LEG Kick Panel Base Powder Coated #10 x.625 Powder Coated

10 Step 4 RETURN TO UPRIGHT POSITION TWO PEOPLE REQUIRED 1/4-20 x 2 LEFT DECORATIVE LEG RIGHT DECORATIVE LEG TOP CROSSBAR 40mm 60mm Powder Coated Left Decorative Leg Right Decorative Leg 60mm Powder Coated Top Crossbar 1/4-20 x 2 40mm

11 Step 5 1/4-20 x 2 6x White BACK PANEL PLATFORM Back Panel Platform White 6x 1/4-20 x 2 6x 1/4-20 x 2

12 Step 6 BAR 8x LARGE TRAY 1 #10 x.75 FH Screw - SMALL TRAY SHELF 10x Powder Coated Small Tray Bar Step Large Tray 8x Shelf Powder Coat 10x #10 x 2 Black #10 x.75 FH Screw - 1 #10 x 2 Black STEP

13 Step 7 BINDER POCKET SHELF MAT 1/4-20 x 1/2 Button HD Screw 20mm LARGE TRAY MAT 20mm SMALL TRAY MAT Small Tray Mat Large Tray Mat Shelf Mat CATALOG POCKET Catalog Pocket Binder Pocket 1/4-20 x 1/2 Button HD Screw 20mm 3x PEEL PEEL PAPER BACKING OFF MATS BEFORE APPLYING

14 Step 8 CONGRATULATIONS YOU HAVE SUCCESSFULLY ASSEMBLED THE CROSSVILLE BOUTIQUE ENVISION MODULE NEVER MOVE LOADED DISPLAY MAKE SURE ALL FASTENERS ARE TIGHTENED