Aquacultural Catalog. Aquacultural Catalog 508A
|
|
- Bathsheba Hamilton
- 5 years ago
- Views:
Transcription
1 Aquacultural Catalog Aquacultural Catalog 508A
2 MISSION STATEMENT To provide complete automation solutions for the United States and international market with products and service that meet or exceed customer expectations for quality, performance, and reliability at the lowest possible cost and delivered within the customer s schedule, through our authorized distribution network. COMPANY HISTORY In 1993, North American Electric began sourcing high quality, high performance electric motors and gearing from around the world and distributed them on a national and international level. In 2014, we opened our NAE Motor Controls division enabling us to offer our wholesale distribution network complete automation solutions. Motors Motor Controls Gear Reducers
3 SAFETY SWITCHES HEAVY DUTY 30 AMP 1200 AMP 480 VAC / 600 VAC 3-Pole / 3-Wire / Non-Fused or Fused NEMA 3R Enclosure ACROSS THE LINE STARTERS NEMA 1 NEMA 5 Full NEMA Rated Contactors Circuit Breaker or Fused w/ Flanged NEMA 3R Enclosure PART WIND STARTERS 10 HP 200 HP IEC Rated Contactors Circuit Breaker or Fused NEMA 3R Enclosure SOFT STARTERS 15 HP 300 HP Siemens 3RW40 Series Devices Normal Duty or Heavy Duty Circuit Breaker w/ Through-Door NEMA 3R or 4/12 Enclosure SOFT STARTERS CRUSHER/SEVERE 20 HP 800 HP SAF MS6 Series Devices Ultra Heavy Duty (500% FLA for 30 Seconds) Circuit Breaker w/ Through Door NEMA 3R or 4/12 Enclosure VFD ECONOMY 1 HP 700 HP Variable Torque ½ HP 600 HP Constant Torque LSis or Siemens Series Drives Non-Combo, Circuit Breaker or Fused NEMA 3R, NEMA 4 or NEMA 12 VFD STANDARD 1 HP 700 HP Variable Torque ½ HP 600 HP Constant Torque LSis or Siemens Series Drives Circuit Breaker or Fused NEMA 3R, NEMA 4 or NEMA 12 VFD STAINLESS 1 HP 700 HP Variable Torque ½ HP 600 HP Constant Torque LSis or Siemens Series Drives Circuit Breaker or Fused NEMA 4X Enclosure VFD IRRIGATION 1 HP 700 HP LSis or Siemens Series Drives 24/7 Programmable & 0 10 Backspin Timer Variable Torque Circuit Breaker or Fused NEMA 3R Enclosure VFD SUBMERSIBLE ½ HP 200 HP LSis or Siemens Series Drives 24/7 Programmable & 0 10 Backspin Timer Variable Torque Circuit Breaker or Fused NEMA 3R Enclosure VFD POSITIVE DISPLACEMENT PUMP 3 HP 600 HP LSis or Siemens Series Drives Constant Torque Circuit Breaker or Fused w/ Flanged NEMA 3R Enclosure VFD BEAM PUMP 3 HP 200 HP LSis or Siemens Series Drives ReGen Avoidance Design Constant Torque Circuit Breaker w/ Flanged NEMA 3R Enclosure CUSTOM PANELS 3
4 Safety Switches Heavy Duty Rated 480VAC / 600VAC 3-Pole / 3-Wire / Non-Fused or Fused NEMA 3R Enclosure 30 AMP 200 AMP SAFETY SWITCHES 3-POLE/3-WIRE 480VAC/600VAC HEAVY DUTY RATED NEMA 3R Standard Features for Base Models Include: ❶ 30 AMP 200 AMP Ratings in Stock ❷ NEMA 3R Heavy Duty Enclosure ❸ 3-Pole / 3-Wire / Non-Fused or Fused ❹ Rated for 480VAC / 600VAC ❺ Highly Visible / Easy-to-Grip Handle ❻ Visible Blade Construction ❼ Door Opens 180 and Greater ❽ All Copper Current Carrying Parts ❾ Quick-Make, Quick-Break Mechanism ❿ Positive Two and Three Point Mounting ⓫ Front Removable Lugs Can Easily be Converted to Copper Body or Compression Type Lugs ⓬ Lugs Suitable for Copper (60 C ) or Aluminum (75 C) ⓭ Padlockable Cover Latches and Disconnect Handle ⓮ UL 508A Certified ⓯ Two (2) Year Warranty Most Orders Ship Within 24 HOURS 3-POLE / 3-WIRE / NON-FUSED Multiplier Symbol M VAC / 600 VAC Dimensions (Inches) Amp Rating Type Model Number H W D SFTYSWNF-30A-THN3361R 30A 3-Pole / 3-Wire / Non-Fused $216 SFTYSWNF-60A-THN3362R 60A 3-Pole / 3-Wire / Non-Fused $385 SFTYSWNF-100A-THN3363R 100A 3-Pole / 3-Wire / Non-Fused $535 SFTYSWNF-200A-THN3364R 200A 3-Pole / 3-Wire / Non-Fused $648 3-POLE / 3-WIRE / FUSED Multiplier Symbol M VAC / 600 VAC Dimensions (Inches) Amp Rating Type Model Number H W D SFTYSW-30A-TH3361R 30A 3-Pole / 3-Wire/ Fused $336 SFTYSW-60A-TH3362R 60A 3-Pole / 3-Wire/ Fused $417 SFTYSW-100A-TH3363R 100A 3-Pole / 3-Wire/ Fused $595 SFTYSW-200A-TH3364R 200A 3-Pole / 3-Wire/ Fused $818 4
5 Safety Switches Heavy Duty Rated w/ Lightning & Surge Protection 480VAC / 600VAC 3-Pole / 3-Wire / Non-Fused or Fused NEMA 3R Enclosure 30 AMP 200 AMP SAFETY SWITCHES w/ LIGHTNING & SURGE PROTECTION 3-POLE/3-WIRE PROTECTS AGAINST LIGHTNING STRIKES AND EXTREME SURGES! 480VAC/600VAC HEAVY DUTY RATED NEMA 3R Standard Features for Base Models Include: ❶ 30 AMP 200 AMP Ratings in Stock ❷ NEMA 3R Heavy Duty Enclosure ❸ 3-Pole / 3-Wire / Non-Fused or Fused ❹ Rated for 480VAC / 600VAC ❺ Highly Visible / Easy-to-Grip Handle ❻ Visible Blade Construction ❼ Door Opens 180 and Greater ❽ All Copper Current Carrying Parts ❾ Quick-Make, Quick-Break Mechanism ❿ Positive Two and Three Point Mounting ⓫ Front Removable Lugs Can Easily be Converted to Copper Body or Compression Type Lugs ⓬ Lugs Suitable for Copper (60 C ) or Aluminum (75 C) ⓭ Padlockable Cover Latches and Disconnect Handle ⓮ UL 508A Certified ⓯ Three (3) Year Warranty with Lightning & Surge Protection Most Orders Ship Within 24 HOURS 3-POLE / 3-WIRE / NON-FUSED Multiplier Symbol M VAC / 600 VAC Dimensions (Inches) Amp Rating Type Model Number H W D SFTYLPNF-30A-THN3361R 30A 3-Pole / 3-Wire / Non-Fused $1,216 SFTYLPNF-60A-THN3362R 60A 3-Pole / 3-Wire / Non-Fused $1,385 SFTYLPNF-100A-THN3363R 100A 3-Pole / 3-Wire / Non-Fused $1,535 SFTYLPNF-200A-THN3364R 200A 3-Pole / 3-Wire / Non-Fused $1,648 3-POLE / 3-WIRE / FUSED Multiplier Symbol M VAC / 600 VAC Dimensions (Inches) Amp Rating Type Model Number H W D SFTYLP-30A-TH3361R 30A 3-Pole / 3-Wire/ Fused $1,336 SFTYLP-60A-TH3362R 60A 3-Pole / 3-Wire/ Fused $1,417 SFTYLP-100A-TH3363R 100A 3-Pole / 3-Wire/ Fused $1,595 SFTYLP-200A-TH3364R 200A 3-Pole / 3-Wire/ Fused $1,818 5
6 ATL General Purpose Panel Package Full NEMA Rated Contactors Circuit Breaker or Fused w/ Flanged Disconnect NEMA Sizes 1 2 NEMA 3R Enclosure Standard Features for Base Models Include: ❶ NEMA 1 NEMA 2 Sizes in Stock ❷ Fully Gasketed / NEMA 3R / Heavy Duty Enclosure ❸ Combination Circuit Breaker or Fused w/ Flanged Disconnect ❹ Full NEMA Rated Contactor Interchangeable Coils for Easy Field Conversion Between 240V and 480V (No Special Tools Needed) ❺ Solid State Overload One Overload Covers Entire HP (Amp) Range for Each NEMA Size ❻ Overload Reset Button ❼ Start Pushbutton ❽ Hand / Off / Auto (HOA) Selector Switch ❾ Heavy Duty Mounting Ears ❿ Padlockable Door and Disconnect ⓫ Service Entry Rated ⓬ UL 508A Certified ⓭ Standard Two (2) Year Warranty or OPTIONAL Three (3) Year Warranty with Lightning & Surge Protection ⓮ Other Options Available NEMA 1 NEMA 2 ACROSS THE LINE STARTER CIRCUIT BREAKER OR FUSED FULL NEMA RATED CONTACTOR 240V: 10 HP 15 HP 480V: 3 HP 25 HP NEMA 3R Multi-Motor Panels Available Multiplier Symbol CIRCUIT BREAKER w/ FLANGED DISCONNECT M70 240V Starters NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-230-N2-BRKR-STD $1, V Starters NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-460-N1-BRKR-STD $833 ATL-IRR-460-N2-BRKR-STD $1, V Starters NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-230-N2-FUSD-STD $869 ¹ HP ratings are for reference only. Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor. Multiplier Symbol FUSED w/ FLANGED DISCONNECT 480V Starters NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-460-N1-FUSD-STD $734 ATL-IRR-460-N2-FUSD-STD $869 M70 Warranty on pp Options on p. 8 6
7 ATL General Purpose Panel Package Full NEMA Rated Contactors Circuit Breaker or Fused w/ Flanged Disconnect 120V Fused Control Power (Transformer) NEMA Sizes 1 2 NEMA 3R Enclosure Standard Features for Base Models Include: ❶ NEMA 1 NEMA 2 Sizes in Stock ❷ Fully Gasketed / NEMA 3R / Heavy Duty Enclosure ❸ Combination Circuit Breaker or Fused w/ Flanged Disconnect ❹ Full NEMA Rated Contactor Interchangeable Coils for Easy Field Conversion Between 240V and 480V (No Special Tools Needed) ❺ Solid State Overload One Overload Covers Entire HP (Amp) Range for Each NEMA Size ❻ Overload Reset Button ❼ Start Pushbutton ❽ Hand / Off / Auto (HOA) Selector Switch ❾ 120V Fused Control Power (Transformer) ❿ Heavy Duty Mounting Ears ⓫ Padlockable Door and Disconnect ⓬ Service Entry Rated ⓭ UL 508A Certified ⓮ Standard Two (2) Year Warranty or OPTIONAL Three (3) Year Warranty with Lightning & Surge Protection ⓯ Other Options Available NEMA 1 NEMA 2 ACROSS THE LINE STARTER 120V FUSED CONTROL POWER CIRCUIT BREAKER OR FUSED FULL NEMA RATED CONTACTOR 240V: 10 HP 15 HP 480V: 3 HP 25 HP NEMA 3R Multi-Motor Panels Available Multiplier Symbol CIRCUIT BREAKER w/ FLANGED DISCONNECT M70 240V Starters / 120V Control NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-230-N2-BRKR-24S $1, V Starters / 120V Control NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-460-N1-BRKR-24S $967 ATL-IRR-460-N2-BRKR-24S $1, V Starters / 120V Control NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-230-N2-FUSD-24S $1, V Starters / 120V Control NEMA Amp Dimensions (Inches) HP¹ Model Number Size Range H W D ATL-IRR-460-N1-FUSD-24S $868 ATL-IRR-460-N2-FUSD-24S $1,003 ¹ HP ratings are for reference only. Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor. Multiplier Symbol FUSED w/ FLANGED DISCONNECT M70 Warranty on pp Options on p. 8 7
8 ATL SERIES ACROSS THE LINE STARTER (ATL) - CONTROL PANEL OPTIONS M50¹ MODEL LIST DESCRIPTION PRICE NUMBER (w/ Installation) PUSH-BUTTONS 004 Start Pushbutton $ Stop Pushbutton $ Start / Stop Pushbutton $ Raised Pushbutton - Specify Color and Function $ Flush Pushbutton - Specify Color and Function $ Mushroom Type Pushbutton - Specify Color and Function $ Illuminated Pushbutton - Specify Color and Function $ ATL / PWS Overload Reset Pushbutton $144 PILOT LIGHTS Run Light $ Stop Light $ Power On Light $ Fault Light $ Ready Light $ Bypass Light $ Red Light - Specify Function $ Green Light - Specify Function $ Amber Light - Specify Function $ White Light - Specify Function $ Blue Light - Specify Function $ Push to Test Contact Assembly $159 SELECTOR SWITCHES 024 Hand - Off - Auto / HOA Selector Switch $ Local - Off - Remote Selector Switch $ Key Operated Hand - Off - Auto Selector Switch $ Two Position Selector Switch - Specify Function $ Three Position Selector Switch - Specify Function $ Other Selector Switch - Specify Function and Type METERS Elapsed Time Meter $ Other Power Metering - Specify Function TIMERS /7 Programmable Timer $ Minute Restart (Back Spin) Timer $150 UNIVERSAL RAINTIGHT HUBS TC75 3/4" Diameter $14 TC100 1" Diameter $14 TC /4" Diameter $14 TC /2" Diameter $14 TC200 2" Diameter $14 TC /2" Diameter $14 TC300 3" Diameter $14 ADVANCED FAULT / STATUS MONITORING OPTIONS Stack / Tower Light Visibility (Red / Yellow / Green) w/ 6' Cable $ Two Way Cellular Communication & Functionality $ Cloud Based Remote Monitoring FUSES - We Stock Fuses for Convenience. Please Call for Pricing. SPACE HEATERS Space Heater with Thermostat $426 MISCELLANEOUS 054 Transformer $149 PROTECTION MECHANISMS SymCom MotorSaver Model 460 $ "Lightning and Surge" Protection 2 - All panels will include line side lightning, surge and severe overvoltage protection, which comprises $949 one (1) additional year of warranty coverage on the entire panel. In addition, all soft starter & VFD panels will include load side single phasing, phase reversal and voltage unbalance protection, and are eligible for NAE's "No Hassle" Chassis Exchange Program ¹ Multiplier Symbol. 2 Warranty on pp Requires Transformer Please sales@naemotors.com, or contact us at for assistance. 8
9 Soft Starter Multi-Motor Aerator Panel Siemens 3RW30 Series 4, 5, 6 or 8 Multi-Motor Panel Circuit Breaker with Flanged Disconnect NEMA 3R Enclosure SIEMENS 3RW30 SERIES SOFT STARTER MULTI-MOTOR PANEL FLOATING AERATOR PANEL PACKAGE CIRCUIT BREAKER W/ FLANGED NEMA 3R Standard Features for Base Models Include: ❶ 10 HP Rating Multi-Motor Versions in Stock ❷ Fully Gasketed / NEMA 3R / Heavy Duty Enclosure ❸ Combination Circuit Breaker w/ Flanged Disconnect ❹ Siemens 3RW30 Series Chassis High Functionality Compact Design Integrated Bypass Contactor For Each Motor Circuit ❺ Motor / Short Circuit Protection For Each Motor Circuit ❻ Isolation Contactor For Each Motor Circuit ❼ Hand / Off / Auto (HOA) Selector Switch For Each Motor Circuit ❽ 24 Volt DC Control Power w/ 24 Volt Power Supply Included ❾ In-Situ Wireless Aerator Control Board ❿ Surge Suppressor ⓫ Padlockable Door and Disconnect ⓬ Service Entry Rated ⓭ UL 508A Certified ⓮ Two (2) Year Warranty ⓯ Other Options Available Application: Soft Starter Packages designed to allow multiple aerators to be turned on or off remotely. Multiplier Symbol M90 480V Starters Multi - Amp Dimensions (Inches) Chassis HP¹ Model Number Motor # Range H W D Model 3040B-010FRCF0-27G $8,648 3RW B-010FRCF0-27G $9,332 3RW B-010FRCF0-27G $10,435 3RW B-010FRCF0-27G $12,597 3RW30 ¹ HP ratings are for reference only. Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor. In-Situ is a registered trademark of In-Situ Inc. All Rights Reserved. Warranty on pp Options on p. 10 9
10 3000 SERIES REDUCED VOLTAGE SOFT STARTER (RVSS) - CONTROL PANEL OPTIONS M50¹ MODEL LIST DESCRIPTION PRICE NUMBER (w/ Installation) PUSH-BUTTONS 004 Start Pushbutton $ Stop Pushbutton $ Start / Stop Pushbutton $ Jog Pushbutton $ Raised Pushbutton - Specify Color and Function $ Flush Pushbutton - Specify Color and Function $ Mushroom Type Pushbutton - Specify Color and Function $ Illuminated Pushbutton - Specify Color and Function $ Soft Start or VFD Chassis Reset Pushbutton $138 PILOT LIGHTS 006 Run Light $ Stop Light $ Power On Light $ Fault Light $ Ready Light $ Bypass Light $ Red Light - Specify Function $ Green Light - Specify Function $ Amber Light - Specify Function $ White Light - Specify Function $ Blue Light - Specify Function $ Push to Test Contact Assembly $ High Visibility Status Light (PLC may required for complete functionality) $249 SELECTOR SWITCHES 024 Hand - Off - Auto / HOA Selector Switch $ Local - Off - Remote Selector Switch $ Key Operated Hand - Off - Auto Selector Switch $ Two Position Selector Switch - Specify Function $ Three Position Selector Switch - Specify Function $ Other Selector Switch - Specify Function and Type 030 METERS Elapsed Time Meter $ Other Power Metering - Specify Function 037 TIMERS 24/7 Programmable Timer $ Minute Restart (Back Spin) Timer $150 ADVANCED FAULT / STATUS MONITORING OPTIONS 110 Stack / Tower Light Visibility (Red / Yellow / Green) w/ 6' Cable $ Murphy Switch Interface W/ Fault Recall Function $1, Two Way Cellular Communication & Functionality $ Cloud Based Remote Monitoring SPACE HEATERS 034 Space Heater with Thermostat $ PROTECTION MECHANISMS Surge Suppressor $ SymCom MotorSaver Model 460 $ "Lightning and Surge" Protection 2 - All panels will include line side lightning, surge and severe overvoltage protection, which comprises $949 one (1) additional year of warranty coverage on the entire panel. In addition, all soft starter & VFD panels will include load side single phasing, phase reversal and voltage unbalance protection, and are eligible for NAE's "No Hassle" Chassis Exchange Program 070 MAIN LINE ONLY BOXES Main Line Only Box: 20" Tall, 16" Wide, 12" Depth $1,799 FLOOR STANDS SPFSK-1212-W 2 Legs; 12" Tall, 12" Depth $223 SPFSK-1216-W 2 Legs; 12" Tall, 16" Depth $250 ¹ Multiplier Symbol. 2 Warranty on pp Please sales@naemotors.com, or contact us at for assistance. 10
11 GENERAL PURPOSE INVERTER DUTY MOTORS 1 HP 300 HP; 2, 4, 6 or 8-Pole NEMA Design B Totally Enclosed Fan Cooled or Open Drip Proof Inverter Duty (20:1 VT; 10:1 CT) STAINLESS STEEL WASHDOWN DUTY MOTORS 1/3 HP 20 HP; 2, 4 or 6-Pole C-Flange w/ Feet or Round Body Inverter Duty (20:1 VT; 10:1 CT) ALUMINUM FRAME INVERTER DUTY MOTORS 1 HP 10 HP; 2 or 4-Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT) CRUSHER DUTY MOTORS 1 HP 600 HP; 4, 6 or 8-Pole NEMA Design C Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT) (1 HP 300 HP) Inverter Rated (10:1 VT; 5:1 CT) (250 HP 600 HP) CLOSE COUPLED PUMP MOTORS 1 HP 75 HP; 2 or 4-Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT) EXPLOSION PROOF MOTORS HP; 2, 4 or 6-Pole All Motors Meet Or Exceed UL 674 Specification As Required By OSHA For Installation And Use In Hazardous Locations Totally Enclosed Explosion Proof Inverter Rated (10:1 VT; 5:1 CT) ROUND BODY MOTORS 1 HP 30 HP; 4-Pole; 1800 RPM C-Flange without Feet Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT) OIL WELL PUMP MOTORS, TEFC 2 HP 150 HP; 6 or 8-Pole NEMA Design D; High Slip (5% 8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT) SINGLE PHASE, 56C FRAME, TEFC 1/3 HP 2 HP; 2 or 4-Pole High Starting Torques Capacitor Start / Capacitor Run Design Rolled Steel Construction Removable Feet SINGLE PHASE, FARM DUTY, TEFC 1/3 HP 10 HP; 2 or 4-Pole High Starting Torques Manual Overload Protection (1/3 5 HP) Capacitor Start / Capacitor Run Design Rolled Steel Construction SINGLE PHASE, OPEN DRIP PROOF 3 HP 5 HP; 2 or 4-Pole High Starting Torque Capacitor Start / Capacitor Run Design Rolled Steel Construction OIL WELL PUMP MOTORS, ODP 7.5 HP 100 HP; 6-Pole NEMA Design D; High Slip (5% 8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT) VERTICAL HOLLOW SHAFT PUMP MOTORS 10 HP 500 HP; 4-Pole Extra High Thrust / Double Stacked Bearings Available Inverter Rated (10:1 VT) or Inverter Duty (20:1 VT) ROTARY UNIT FOR ROTARY PHASE CONVERTER 3 HP 60 HP; 4-Pole For Use with Rotary Phase Converters To Run Three Phase Equipment From Single Phase Power Totally Enclosed Fan Cooled THREE-PHASE, 56C FRAME, TEFC 1/3 HP 3 HP; 2 or 4-Pole High Starting Torque Rolled Steel Construction Removable Feet THREE-PHASE, TEFC 1 HP 10 HP; 2 or 4-Pole High Starting Torque Rolled Steel Construction THREE-PHASE, OPEN DRIP PROOF 1 HP 20 HP; 2 or 4 -Pole High Starting Torque Rolled Steel Construction SHAFT MOUNT REDUCERS & ACCESSORIES Sizes 2 10 Gear Ratios: 15:1 & 25:1 Screw Conveyor Adaptors Available Repair Kits Also Available MOTOR CONTROLS: SAFETY SWITCHES ACROSS THE LINE STARTERS PART WIND STARTERS SOFT STARTERS VFDs MOTOR SLIDE BASES Available U Frame Single-Adjusting Screw Type (56 145T Frame) Double-Adjusting Screw Type (182T 505U Frame) 11
12 General Purpose Rolled Steel Three-Phase, 215T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Rated (10:1 VT; 5:1 CT) NEMA MG-1, PART 31, TABLE HP GENERAL PURPOSE ROLLED STEEL 215T FRAME THREE-PHASE TEFC Standard Features Include: ❶ 10 HP in Stock ❷ 1.15 Service 60 Hertz; 1.0 Service 50 Hertz ❸ Sealed Bearings ❹ Class F Insulation System; Class B Rise at Full Load; Class H Vacuum Pressure Impregnation (VPI) Resin for All Windings ❺ 40 o C Ambient Continuous Duty ❻ Stainless Steel Nameplate and Zinc Plate Hardware ❼ NEMA Design B Performance / High Starting Torque ❽ Feet are Dual Drilled for Mounting Flexibility ❾ Corrosion Resistant Epoxy Paint ❿ Lifting Provision ⓫ Condensation Drains with Plugs ⓬ IP55 Protection ⓭ Three (3) Year Warranty (Extended Warranty Available) APPLICATIONS: THREE-PHASE General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial and commercial machinery installed in damp, dusty or dirty environments. Suitable for use with variable frequency drives. THREE-PHASE, TEFC T-FRAME CATALOG FRAME LIST MULT. FULL "C" WT. HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES T /460 PR215T10M4A RSTE $857 M THREE-PHASE, TEFC TC-FRAME CATALOG FRAME LIST MULT. FULL "C" WT. HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES T /460 PR215TC10M4A RSTE $926 M Performance Data / Dimensions found at naemotors.com; Warranty on pp
13 General Purpose Heavy Duty Cast Iron Three-Phase, 215T 254T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT NEMA MG-1, PART 31, TABLE CLASS I, DIV II GROUPS ABCD, T2B CLASS II, DIV II GROUPS F & G 10 HP 15 HP GENERAL PURPOSE CAST IRON 215T 254T FRAME THREE-PHASE TEFC Standard Features Include: ❶ 10 HP 15 HP in Stock ❷ 1.15 Service 60 Hertz; 1.0 Service 50 Hertz; Suitable for 1.0 Service Factor ❸ Sealed Bearings Through 215T Frame; Regreasable Open Bearings 254T Frame ❹ Class F Insulation System; Class B Rise at Full Load; Class H Vacuum Pressure Impregnation (VPI) Resin for All Windings ❺ 40 o C Ambient Continuous Duty ❻ Stainless Steel Nameplate and Zinc Plate Hardware ❼ NEMA Design B Performance ❽ Feet are Dual Drilled for Mounting Flexibility ❾ Dual Voltage Ratings Suitable for Part Wind Start on Lower Voltage; Single Voltage (460V) Ratings are Suitable for Part Wind Start ❿ Corrosion Resistant Epoxy Paint ⓫ F1 / F2 Reversible ⓬ Lifting Provision ⓭ Condensation Drains with Plugs ⓮ Windings Rated for 2200V Peak Voltage Spikes ⓯ IP55 Protection ⓰ Three (3) Year Warranty (Extended Warranty Available) APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp, dusty or dirty environments. IP55 Protection as standard for indoor and outdoor applications. Suitable for use with variable frequency drives. THREE-PHASE, TEFC T-FRAME CATALOG FRAME LIST MULT. FULL "C" WT. HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES T /460 PE215T-10-4 NEPE $1,058 M ,2, T /460 PE254T-15-4 NEPE $1,520 M ,2,3,5 1 NEMA Premium (NEMA MG-1, Table 12-12) 3 12 Lead Part Wind Start at 460V 2 5 Inverter Duty (20:1 Variable Torque; 10:1 Constant Torque) Ball Bearing on Drive End Performance Data / Dimensions found at naemotors.com; Warranty on pp
14 General Purpose Heavy Duty Cast Iron Three-Phase, 215T 254T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT NEMA MG-1, PART 31, TABLE CLASS I, DIV II GROUPS ABCD, T2B CLASS II, DIV II GROUPS F & G 10 HP 15 HP GENERAL PURPOSE C-FLANGE W/ FEET CAST IRON 215TC 254TC FRAME THREE-PHASE TEFC Standard Features Include: ❶ 10 HP 15 HP in Stock ❷ 1.15 Service 60 Hertz; 1.0 Service 50 Hertz ❸ Sealed Bearings Through 215T Frame; Regreasable Open Bearings 254T Frame ❹ Class F Insulation System; Class B Rise at Full Load; Class H Vacuum Pressure Impregnation (VPI) Resin for All Windings ❺ 40 o C Ambient Continuous Duty ❻ Stainless Steel Nameplate and Zinc Plate Hardware ❼ NEMA Design B Performance ❽ Feet are Dual Drilled for Mounting Flexibility ❾ Dual Voltage Ratings Suitable for Part Wind Start on Lower Voltage; Single Voltage (460V) Ratings are Suitable for Part Wind Start ❿ Corrosion Resistant Epoxy Paint ⓫ F1 / F2 Reversible ⓬ Lifting Provision ⓭ Condensation Drains with Plugs ⓮ Windings Rated for 2200V Peak Voltage Spikes ⓯ IP55 Protection ⓰ Three (3) Year Warranty (Extended Warranty Available) APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp, dusty or dirty environments. IP55 Protection as standard for indoor and outdoor applications. Suitable for use with variable frequency drives. THREE-PHASE, TEFC TC-FRAME CATALOG FRAME LIST MULT. FULL "C" WT. HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES TC /460 PE215TC-10-4 NEPE $1,089 M TC /460 PE254TC-15-4 NEWT $1,565 M Ball Bearing on Drive End Performance Data / Dimensions found at naemotors.com; Warranty on pp
15 General Purpose Aluminum Three Phase, 215T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG-1, TABLE CLASS I, DIV II GROUPS ABCD, T2B 10 HP GENERAL PURPOSE ALUMINUM 215T FRAME THREE-PHASE TEFC Standard Features Include: ❶ 10 HP in Stock ❷ 1.15 Service 60 Hertz; 1.0 Service 50 Hertz; Suitable for 1.0 Service Factor ❸ Sealed Bearings ❹ Class F Insulation System; Class B Rise at Full Load; Class H Spike Resistant Wire Used for All Windings ❺ 40 o C Ambient Continuous Duty ❻ Stainless Steel Nameplate and Zinc Plate Hardware ❼ NEMA Design B Performance ❽ Removable Feet are Dual Drilled for Mounting Flexibility ❾ Dual Voltage Ratings Suitable for Part Wind Start on Lower Voltage; Single Voltage (460V) Ratings Suitable for Part Wind Start ❿ Corrosion Resistant Epoxy Paint ⓫ F1 / F2 Reversible ⓬ Lifting Provision ⓭ Condensation Drains with Plugs ⓮ Windings Rated for 2200V Peak Voltage Spikes ⓯ IP55 Protection ⓰ Suitable for Use With Variable Frequency Drives ⓱ Two (2) Year Warranty (Extended Warranty Available) APPLICATIONS: General purpose use on catfish pond aerator pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp, dusty or dirty environments. IP55 Protection as standard for indoor and outdoor applications. Suitable for use with variable frequency drives. THREE-PHASE, TEFC T-FRAME CATALOG FRAME LIST MULT. FULL "C" WT. HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES T /460 APE215T-10-4 APEW $1,058 M THREE-PHASE, TEFC TC-FRAME CATALOG FRAME LIST MULT. FULL "C" WT. HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES T /460 APE215TC-10-4 APEW $1,089 M Performance Data / Dimensions found at naemotors.com; Warranty on pp
16 Shaft Mount Gear Reducers Direct "Drop In" for Dodge - TXT style 2 BOX SIZE SHAFT MOUNT REDUCER 15:1 or 25:1 RATIO Standard Features Include: ❶ 2 Box Size in Stock ❷ 15:1 and 25:1 Ratio ❸ High Quality Bearings ❹ Double Lip Seals ❺ Case Hardened Steel Shafts & Gears ❻ Tapered Bore ❼ Meets or Exceeds AGMA 9 Standards ❽ Computerized Design & Construction ❾ Screw Conveyor Adaptable ❿ Torque Arm Included ⓫ CEMA Adapter Bolt Holes ⓬ Corrosion Resistant Epoxy Paint ⓭ Two (2) Year Warranty CATALOG DESCRIPTION MULT. LIST WT. NUMBER BOX SIZE RATIO OUTPUT BORE (MAX) SYMBOL PRICE (LBS) NBS :1 1-15/16" M21 $ NBS :1 1-15/16" M21 $ Dodge is a trademark of Baldor Electric Company, which does not sponsor or authorize, or is otherwise affiliated with this product. Performance Data / Accessories found at naemotors.com; Warranty on pp
17 Accessories Motor Slide Base U FRAME MOTOR SLIDE BASE Standard Features Include: ❶ U Frame Size in Stock; T Frames are Single-Adjusting Screw Type; 182T 505U Frames are Double-Adjusting Screw Type ❷ Bases are Provided with Washers ❸ Primed with Oven-Baked Primer for Easy Painting (Color: Black) ❹ All D Bolts (or Motor Mounting Bolts) are Welded into Position to Prevent Spinning and Dropping from the Slots ❺ All D Bolts (or Motor Mounting Bolts) are Fixed to the Exact Foot Pattern of the Motor to Aid in Easier Motor Installation ❻ Three (3) Year Warranty CATALOG WEIGHT MULTIPLIER LIST NUMBER (LBS.) SYMBOL PRICE NA56 3 M11 $18 NA143 6 M11 $35 NA145 7 M11 $35 NA M11 $48 NA M11 $48 NA M11 $71 NA M11 $71 NA M11 $97 NA M11 $97 NA M11 $109 NA M11 $109 NA M11 $159 NA M11 $159 NA M11 $221 NA M11 $221 NA M11 $271 NA M11 $271 NA M11 $307 NA M11 $307 NA M11 $406 NA M11 $406 NA M11 $630 Dimensions on p
18 Dimensions Motor Slide Base T FRAME MOTOR SLIDE BASE FRAME # A B C D G F BA T AX AY BOLT AT /8 6 1/2 10 5/8 3 13/16 2 7/16 1 1/2 4 1/ /8 3/8*4 7/8 143T 3 3/8 7 1/2 10 1/2 3 3/4 2 3/ / /8 3/8*4 13/16 145T 3 7/8 8 1/2 10 1/2 3 3/4 2 3/4 2 1/2 6 1/ /8 3/8*4 13/16 182T 4 1/4 9 1/2 12 3/4 4 1/2 3 3/4 2 1/4 6 1/ /2 1/2*6 1 1/2 184T 4 3/4 10 1/2 12 3/4 4 1/2 3 3/4 2 3/4 7 1/ /2 1/2*6 1 1/2 213T 4 3/ /4 4 1/4 2 3/4 7 1/ /4 1/2*6 1 1/2 215T 5 1/2 12 1/ /4 4 1/4 3 1/ /4 1/2*6 1 1/2 254T 6 5/8 15 1/8 17 3/4 6 1/ /8 10 3/4 3/16 2 5/8*6 1 7/16 256T 7 1/2 16 7/8 17 3/4 6 1/ /2 3/16 2 5/8*6 1 7/16 284T 7 1/2 16 7/8 19 3/ /2 4 3/4 12 1/2 3/16 2 5/8*6 1 11/16 286T 8 1/4 18 3/8 19 3/ /2 5 1/2 14 3/16 2 5/8*6 1 11/16 324T 505U FRAME MOTOR SLIDE BASE FRAME # A B C D F H T AX DI AY BOLT 324T 19 1/4 8 1/2 22 3/ /4 14 3/16 2 1/2 3/4 3/4*9 326T 20 3/4 9 1/4 22 3/ /4 15 1/2 3/16 2 1/2 3/4 3/4*9 364T 20 1/2 9 1/8 25 1/ /2 1/4 2 1/2 3/4 3/4*9 365T 21 1/2 9 5/8 25 1/ /2 1/4 2 1/2 3/4 3/4*9 404T 22 3/8 9 7/8 28 3/ /2 1/4 3 7/8 3/4*11 405T 23 7/8 10 5/8 28 3/ /4 3 7/8 3/4*11 444T 24 5/ / /4 1/4 3 7/8 3/4*11 445T 26 5/ / /4 1/4 3 7/8 3/4*11 447T 30 1/8 13 3/4 31 1/ /4 5/16 3 7/8 3/4*11 449T 35 1/8 16 1/4 31 1/ /4 5/16 3 7/8 3/4*11 505U / / /4 5/16 3 1/2 1 7/8*12 18
19 CUSTOM PANELS Build Options Panel Packages NAE Motor Controls offers customers the ability to custom order their own control panel to meet their specific needs and have it shipped quickly. We offer control panels from across the line panels to variable frequency drives and everything in between. NAE Motor Controls can package the most common controls to the most complex control systems. All NAE packaged panels are backed by our two (2) year warranty and eligible for up to (6) years of protection with our No Hassle Chassis Exchange Program. naemotors.com
20 ELECTRIC MOTOR CONTROLS WARRANTY POLICY & PROCEDURES North American Electric, Inc. (aka NAE) warrants all products will conform to final specifications and/or drawings and will be free from defects in materials and workmanship. Special build panels will require the final specifications and drawings to be approved in writing by the Buyer before being released for production. This warranty shall remain in effect for a period specified for each product line (24, 36 or 60 months) from the date of the invoice. See warranty period for each product line below: CHASSIS Soft Start Chassis: Siemens Soft Starter Chassis..24 months from date of invoice 3RW30 Series, 3RW40 Series, 3RW44 Series Variable Frequency Drive Chassis: LSis VFD Chassis..24 months from date of invoice C100 Series, S100 Series, S100-4X Series, H100 Series, is7 Series Siemens VFD Chassis...24 months from date of invoice V20 Series, V120 Series, V130 Series ENCLOSED PANEL PACKAGES Safety Switch, ATL and PWS Panels: Heavy Duty Safety Switches...24 months from date of invoice Heavy Duty Safety Switches months from date of invoice with Lightning & Surge Protection Across the Line (ATL) Starter Panels months from date of invoice Part Wind Starter (PWS) Panels..24 months from date of invoice Reduced Voltage Soft Starter Panels: General Purpose Soft Starters..24 months from date of invoice Normal Duty and Heavy Duty Severe Duty Soft Starters months from date of invoice (SAF Opal Pro MS6 Series; Warranty Includes SCRs) Crusher Duty Soft Starters months from date of invoice (SAF Opal Pro MS6 Series; Warranty Includes SCRs) Variable Frequency Drive Panels: General Purpose Economy Panel Packages...24 months from date of invoice Variable Torque and Constant Torque General Purpose Standard Panel Packages. 24 months from date of invoice Variable Torque and Constant Torque Special Purpose Irrigation Pump Panel Packages...36 months from date of invoice with Lightning & Surge Protection INCLUDING No Hassle Chassis Exchange Program Special Purpose Submersible Pump Panel Packages. 36 months from date of invoice with Lightning & Surge Protection INCLUDING No Hassle Chassis Exchange Program Special Purpose Positive Displacement Pump Panel Packages months from date of invoice Standard, Advanced and Deluxe Panel Packages with Lightning & Surge Protection INCLUDING No Hassle Chassis Exchange Program Special Purpose Beam Pump Panel Package..36 months from date of invoice with Lightning & Surge Protection INCLUDING No Hassle Chassis Exchange Program 20
21 Special Purpose Custom / Build To Order Panel Package...24 months from date of invoice (Customer must review, approve and sign drawings prior to panel being released for production) Parts replaced or repaired in the warranty period shall carry the full warranty; the balance of the equipment will carry the unexpired portion of the original warranty. The liability of the Seller hereunder is limited to replacing or repairing any part or parts which are defective or do not conform to such specifications and drawings provided that such part or parts are returned within ninety (90) days from the date such defect is discovered. The Seller shall have the sole right to determine if the parts are to be repaired at the job site or whether they are to be returned to the Seller s facility for repair or replacement. If the Seller has determined warranty part or parts are to be repaired at the job site, a purchase order must be issued for traveling and living expenses. All items returned to Seller for repair or replacement must be accompanied by an RMA number with all the necessary information required by the Seller. Shipping charges for incoming part or parts to be repaired or replaced will be at the Buyer s expense. The above conditions must be met if warranty is to be valid. Seller will not be liable for any damage done by unauthorized repair work, unauthorized replacement parts, from any misapplication of the product, or for damage due to accident, abuse, or act of God. Seller makes no warranties, express or implied including any warranty as to merchantability or fitness for a particular use. Seller is not liable for and Purchaser waives any right of action it has or may have against seller for any consequential or special damages arising out of any breach of warranty, and for any damages Purchaser may claim for damage to any property or injury or death to any person arising out of its purchase or the use, operation or maintenance of the product. Seller will not be liable for any labor subcontracted or performed by Purchaser for preparation of warranted item for return to Seller s facility or for preparation work for field repair or replacement. Invoicing of Seller for labor either performed or subcontracted by Purchaser will not be considered as a liability by the Seller. North American Electric s liability under this warranty or any other warranty whether expressed or implied in law or fact shall be limited to the repair or replacement of defective material and workmanship, and in no event shall North American Electric, Inc. be liable for consequential or indirect damages, including freight. 1 LIGHTNING & SURGE PROTECTION NAE s Heavy Duty Safety Switches and VFD Special Purpose Panel Packages include Lightning & Surge Protection as a standard feature, but it may also be purchased separately (LIST Price: $949.00). All panel packages which receive this protection will include line side lightning, surge and severe overvoltage protection, which will comprise of one (1) additional year of warranty coverage on the entire panel. In addition, all Soft Starter & VFD panel packages which receive this protection will include load side single phasing, phase reversal and voltage unbalance protection, and are eligible for NAE s No Hassle Chassis Exchange Program. NOTE: This protection is not designed to withstand nor does it cover load side (downstream) lightning strikes or direct lightning strikes to the motor control panel. The panel must be properly grounded. ELECTRIC MOTOR CONTROLS WARRANTY CLAIM PROCEDURE Step 1. Have the motor control inspected by an authorized service shop to determine if the problem is a result of defects in materials and/or workmanship. If the problem is a result of defects in materials and/or workmanship North American Electric, Inc. will pay a reasonable inspection fee for the inspection that will included a written warranty report that describes the cause of failure along with photographs that show, in detail, what is described in the warranty report. Step 2. Contact our warranty department and be prepared to provide the following information and documentation: 1) Serial Number 2) Model Number 3) Inspection / Failure Report 4) Photographs showing the cause of failure 5) Estimated cost of repair Visit our website at for detailed information and instructions on the following: 1) Freight Damage and Claims Policy and Procedure 2) Return Material Authorization (RMA) Policy and Procedure Step 3. Our warranty department will determine whether to replace or repair the defective product. DO NOT repair any product without prior written purchase order from North American Electric, Inc. Always be sure to take clear photographs before beginning any repair work. 21
22 MOTOR WARRANTY POLICY & PROCEDURES NO FAULT WARRANTY POLICY Motors with frame sizes 215T and smaller are covered under our No Fault Warranty. The warranty period is 24 months from the date of invoice. This special limited warranty is offered one time per end user, per application. If there is more than one failure, please follow our standard limited warranty policy and procedure and contact our warranty department for assistance. For information regarding this warranty policy you may contact our customer service department at (800) or visit our website at North American Electric s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the motor, and in no event shall North American Electric, Inc. be liable for consequential or indirect damages, including freight. When filing a claim under our No Fault Warranty, you must provide the following documentation to ensure your claim is processed in a timely manner. Original nameplate from the failed motor Copy of the original North American Electric, Inc. invoice or the invoice number for the failed motor A brief description of the failure for quality control purposes Note: Please make a legible photo copy of the nameplate from the failed motor for your records. STANDARD LIMITED WARRANTY POLICY General Purpose Cast Iron Motors (TEFC & ODP) 36 months from date of invoice General Purpose, Aluminum Motors 36 months from date of invoice Rolled Steel Motors, Single Phase. 24 months from date of invoice Rolled Steel Motors, Three-Phase. 36 months from date of invoice Crusher Duty Motors.. 36 months from date of invoice Stainless Steel Motors 24 months from date of invoice Close Coupled Pump Motors. 36 months from date of invoice Explosion Proof Motors 24 months from date of invoice Oil Well Pump Motors 36 months from date of invoice Vertical Hollow Shaft Motors 24 months from date of invoice Rotary Phase Converters 24 months from date of invoice Shaft Mount Reducers 24 months from date of invoice Motor Slide Bases. 36 months from date of invoice North American Electric, Inc. shall, at its option and expense, either repair or replace any such motor or part, which is defective within the warranty period. To be covered under warranty, any motor must have at all times been operated or used under normal operating conditions for which the motor was designed. In the event of warranty claims, North American Electric, Inc. must be notified promptly following any motor failure. The motor should be sent to a North American Electric, Inc. authorized service center to diagnose cause of failure. After this examination, a determination will be made if the failure was due to defective material and/or workmanship. If the failure was due to defective material and/or workmanship, North American Electric, Inc. will replace or repair the motor. DO NOT repair any motor without a prior written purchase order from North American Electric, Inc. North American Electric s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the motor, and in no event shall North American Electric, Inc. be liable for consequential or indirect damages, including freight. When filing a claim under our standard Limited Warranty Policy, please be prepared to provide the following: 1) Serial Number 2) Model Number 3) EASA Report 4) Photographs showing the cause of failure 5) Estimated cost of repair 6) Nameplate (photo of nameplate for stainless steel/washdown duty motors) if motor is to be replaced. For more information about warranty policies and procedures please contact our customer service department at (800) , visit our website at or send us an at sales@naemotors.com. 22
23 CONTINUING EDUCATION North American Electric s continuing education courses were created with you in mind to provide information, tools, technical support, and training to sell, install, and support low voltage AC drives. CONTINUING EDUCATION NAE University offers professional, comprehensive, and educational programs including: Sales/Product Training Electric Motors Electric Motor Controls Motor Start Up / Basic Programming of Low Voltage AC Drives Maintenance and Troubleshooting Training Electric Motors Electric Motor Controls We provide in depth, hands on training at our headquarters in Hernando, Mississippi. We also provide on-site training at your location as well as internet courses and webinars. For more information, please visit our website at or contact us at
24 508A Certified General Purpose Motors & More naemotors.com P.O. Box Vaiden Drive Hernando, MS 38632
Your Source for a Complete Line of Electric Motors. Rolled Steel Motors. A Complete Line of Single Phase and Three Phase Rolled Steel Motors
Your Source for a Complete Line of Electric Motors Rolled Steel Motors A Complete Line of Single Phase and Three Phase Rolled Steel Motors Mission Statement To provide the United States market for industrial
More informationShaft Mount Reducers
Your Source for a Complete Line of Electric Motors & Gearing Shaft Mount Reducers & Accessories Mission Statement To provide the United States market with industrial motors, controls and gearing products
More informationNEMA 4X. Motor Controls Made Easy. Wash Down Panel Packages 508A
NEMA 4X Motor Controls Made Easy 508A Wash Down Panel Packages MISSION STATEMENT To provide complete automa on solu ons for the United States and interna onal market with products and service that meet
More informationMotor Controls Made Easy 508A
Motor Controls Made Easy 508A Siemens Drive Package Partner Program MISSION STATEMENT To provide complete automa on solu ons for the United States and interna onal market with products and service that
More informationMotor Controls Made Easy 508A
Motor Controls Made Easy 508A Siemens Drive Package Partner Program MISSION STATEMENT To provide complete automa on solu ons for the United States and interna onal market with products and service that
More informationWARREN COUNTY, N.Y. M/E REFERENCE A. Submit manufacturer's product data on all motors and adjustable speed drives.
SECTION 230513 - MOTORS AND ADJUSTABLE SPEED DRIVES PART 1 - GENERAL 1.1 DESCRIPTION A. Provide labor, materials, equipment and services as required for the complete installation designed in Contract Documents.
More informationRolled Steel Motors. A Complete Line of Single Phase and Three Phase Rolled Steel Motors
Rolled Steel Motors A Complete Line of Single Phase and Three Phase Rolled Steel Motors SINGLE PHASE, TEFC, 56C FRAME 1/3-2 Horse Power 1800 and 3600 RPM C-Flange with Removable Feet High Starting Torque
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More informationA Full Line of Low Voltage IEC Motors In-Stock
BUILT TO PERFORM WHERE OTHERS FAIL A Full Line of Low Voltage IEC Motors In-Stock Distributed by Elektrim Motors Authorized Distributor: www.elektrimmotors.com or call 855-Go-Elektrim 0.08-220HP Low Voltage
More informationMAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
More informationWarranty Policy No-Fault Warranty (excludes Washdown motors)
Warranty Policy No-Fault Warranty (excludes Washdown motors) Motors with frame sizes 215T and smaller are covered under a No-Fault warranty. This warranty claim is offered one time, per end-user, per application.
More informationBAC Custom Engineered Controls
BAC Custom Engineered Controls Product Detail Product Introduction......................................... K2 BAC Custom Engineered Controls Benefits....................................................
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More informationPVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables
PVI 1800/PVI 2500 WARRANTY MANUAL Residential/Commercial Grid-Tied Photovoltaic Inverter 2009, Solectria Renewables Subject to Change REV 10.09 1 Product Warranty & RMA Policy 1.1 Warranty Policy The Solectria
More informationOWNERS MANUAL JANUARY 2007 ISO
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 121231B OWNERS
More information"SPOAU" DEDICATED 100% OUTSIDE AIR UNITS Self Contained Single Package or Split System Units
"SPOAU" DEDICATED 100% OUTSIDE AIR UNITS Self Contained Single Package or Split System Units Spinnaker Industries Inc. Model Series SPOAU 100% Outdoor Air Systems shall be factory assembled, wired and
More informationADI-125/750 ADI-125/1500 ADI-125/2500
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 121094B OWNERS
More informationDC to AC Power Inverters
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com ISO 9001:2000 Certified
More informationDC to AC Power Inverters
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 121114C OWNERS
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MOTORS, STARTERS & DRIVES
PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. Coordinate starter needs for mechanical equipment prior to 50% CD and confirm again for 100% CD submittal. B. Coordinate temperature controls requirements
More informationPVI 60KW, PVI 82KW, PVI 95KW
PVI 60KW PVI 82KW PVI 95KW WARRANTY MANUAL Commercial, Grid-Tied Photovoltaic Inverters 2008, Solectria Renewables LLC Subject to Change DOC-020099 rev 024 1 1 Product Warranty & RMA Policy Warranty Policy
More informationDefinite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. 3/4 thru 25 Hp NEMA 56 thru 324T
Unit Handling Brake 200 & 575 Volt IEC & Controls DC 158 Two Speed, TEFC, Cast Iron 3/4 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Designed for
More informationAirpax Dimensions, Inc.
Airpax Dimensions, Inc. 4467 White Bear Parkway (651) 653-7000 St. Paul, MN 55110-7626 Fax (651) 653-7600 121177B OWNERS MANUAL JANUARY 2007 Airpax Dimensions, Inc. Uninterruptible Power System OWNERS
More informationMotors Automation Energy Coatings. CrusherDuty. g Roller Bearing. g Reinforced Cast Iron. g Durable. Motor TPH Starter.
Motors Automation Energy Coatings CrusherDuty Motor TPH Starter g Roller Bearing g Reinforced Cast Iron g Durable g Quality CD0808 FOR THE MOST DEMANDING ROCK CRUSHER APPLICATIONS WEG Crusher Duty motors
More informationEPS-ECONOMY PUMP STARTER
EPS-ECONOMY PUMP STARTER NEMA 1 & 3R ENCLOSURES franklinwater.com EPS-ECONOMY PUMP STARTER - 1 & 3 PHASE, 50/60HZ, 200-600 VAC, 1-80A The enhanced Franklin Electric Economy Pump Starter (EPS) provides
More informationA. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
More informationWATTSAVER PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE
PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE The line of premium efficiency motors is now inverter capable. LEESON s unique IRIS voltage-spike-resistant insulation system is standard at no extra cost. motors
More informationDimensions 12/800N 12/1200N D. DC to AC Power Inverters. OWNERS MANUAL for Models: OWNERS MANUAL April ISO 9001:2000 Certified Company
Manufacturer of Dimensions Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com OWNERS MANUAL April
More informationManual Transfer Switch
Manual Transfer Switch Instruction Manual 30 1200 Amp 2, 3 & 4 Pole Page 1 WARNING Before Installation READ THIS MANUAL carefully to learn how to properly install, operate and maintain this unit. Personal
More informationteam master medium voltage solid state starters
team master medium voltage solid state starters The Today s global economy is in many ways driven by the AC Induction Motor. Industrial facilities worldwide depend on these motors to drive the machinery
More informationFarm Duty Motors WEG TOUGH For ALL Seasons. Motors Automation Energy Transmission & Distribution Coatings
WEG TOUGH For ALL Seasons Motors Automation Energy Transmission & Distribution Coatings www.weg.net/us Table of Contents Farm Duty, Single-Phase, TEFC... 4 Farm Duty, Three-Phase, TEFC... 5 Poultry Fan,
More informationModel C230 Pump Controller
MANUAL Model C230 Earthsafe Systems, Inc. 7553 S. Madison Willowbrook, IL 60527 T: (630) 794-5100 F: (630) 794-5106 info@earthsafe.com www.earthsafe.com March 1, 2010 The information contained herein is
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationNEMA Premium Efficiency T-Frame Motors. Three-Phase, TEFC Enclosures RELIABILITY MATTERS
NEMA Premium Efficiency T-Frame Motors Three-Phase, TEFC Enclosures RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global supplier of NEMA premium vertical pump motors and T-frame motors
More informationNEMA & IEC Product Features and Benefits
NEMA & IEC Product Features and Benefits BEAUTY BENEATH THE SURFACE. Looking at a Techtop electric motor, it would be understandable if you thought it was just another NEMA or IEC squirrel-cage induction
More informationWF-5110R True Sine Wave Inverter
Operator s Manual WF-5110R True Sine Wave Inverter WF-9900 Series WF-5110R ( The Inverter model number is located on the label on top of the enclosure) Distributed in the U.S.A. and Canada by ARTERRA DISTRIBUTION
More informationGPH2 Combination Soft Starters
Combination Soft Starters The Combination Soft Starter is a NEMA 4/12 Enclosed industrial general purpose AC motor soft starter package. It is designed for simple and quick installation and start-up, requiring
More informationAqua Ultraviolet Sunami Series Pumps 1/3HP, 3/4HP, 3HP, 4HP, 5HP
TM 42371 Avenida Alvarado Temecula, CA 92590 TOLL FREE (800) 454-2725 TEL (951) 296-3480 FAX (951) 296-3490 www.aquauv.com Aqua Ultraviolet Sunami Series Pumps 1/3HP, 3/4HP, 3HP, 4HP, 5HP Sunami Warranty
More informationWARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN
WARRANTY POLICY Revision D 2014, Solectria Renewables, LLC DOCIN-070360 1 Product Warranty & RMA Policy 1. Warranty Policy Warranty Registration: It is important to have updated information about the inverter
More informationModifiable TITAN Horizontal Motors Accessories and Modifications
36. Rotor, Standard And Optional Construction Standard rotor construction of 449, 5000 and 5800 frame TITAN products is typically die-cast aluminum. 720 RPM and slower is typically fabricated aluminum.
More informationMotors Automation Energy Transmission & Distribution Coatings. GPH2 Combination Soft Starters
Motors Automation Energy Transmission & Distribution Coatings GPH2 Combination Soft Starters GPH2 Combination Soft Starter 5to 350 HP The Combination Soft Starter is a NEMA 4/12 Enclosed industrial general
More information24/3000H-3PH 24/4500H-3PH 24/6000H-3PH
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 120015D OWNERS
More informationInverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
More informationElectric Motors
SELECT Electric Motors To compete in today s global marketplace, you need a supplier who can provide electric motors that meet your quality, cost, and delivery requirements. That is why you rely on IDC
More informationHVW701 HVAC Drive with By-Pass
s Automation Energy Transmission & Distribution Coatings HVW701 HVAC with By-Pass Designed Especially for HVAC Systems US.HVW701.By-Pass.07/2017 www.weg.net WEG HVAC-R Products WEG, a leading supplier
More informationINDEX NEMA PREMIUM EFFICIENCY
INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP
More informationOver 525 Stock Motor Ratings. The Right Pump Motor for your Application. Leadership in Premium Efficiency. 1
Baldor Pump Motors Baldor Reliance is the leading supplier of Pump Motors to meet industrial and commercial applications. From industrial waste water to commercial pool pump motors Baldor Reliance pump
More informationFeatures and Benefits. Control Features
Features and Benefits AC induction motors have become increasingly dominant in industrial facilities worldwide. Manufacturers faced with increasing pressure to control costs have recognized that motor
More informationOWNERS MANUAL JANUARY 2007 ISO
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com OWNERS MANUAL JANUARY
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationSECTION MOTORS AND VARIABLE FREQUENCY DRIVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Related Sections: 1. Section 15050 - Basic Mechanical Requirements. 2. Section 15051 - Motors. 3. Section 15185 - Hydronic Pumps. 4. Section 15625 - Centrifugal
More informationSECTION COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT
SECTION 230513 - COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Single phase electric motors. B. Three phase electric motors. 1.2 REFERENCE STANDARDS A. ABMA STD 9
More informationMIL-24/2600Q MIL-24/3200DQ
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 121473B OWNER'S
More informationSensorless Vector Drives
STANDARD PRODUCTS Sensorless Vector Drives SG SERIES STANDARD DUTY / HEAVY DUTY RATINGS Variable Torque: 7.5 to 700HP @ 460V 7.5 to 40HP @ 2V Standard Duty: 7.5 to 600HP @ 460V 7.5 to 40HP @ 2V Heavy Duty:
More informationMotors Automation Energy Transmission & Distribution Coatings EDP11. Enclosed Drive Panel USA EDP11
Motors Automation Energy Transmission & istribution Coatings EP11 Enclosed rive Panel USA EP11 EP11 Enclosed rive Panel The Enclosed rive Panel is an industrial general purpose AC motor control and protection
More informationMotor Accessories. C-Face Kits for Field Conversion NEMA AC Motors
Definite Purpose Unit Handling C-Face Kits for Field Conversion NEMA AC Features: Complete kits with all hardware necessary for converting Baldor 56 though 449T frame ridgid base motors to C-Face mounting
More informationSPC-PANEL Simplex, Single Phase Pump Control Panel
Pump Installation and Service Manual SPC-PANEL Simplex, Single Phase Pump Control Panel Pump Controls for 2 HP Grinder Pumps NOTE! To the installer: Please make sure you provide this manual to the owner
More information7.3L POWERSTROKE BANJO BOLT KIT Fits L Powerstroke Diesel. Installation Guide
7.3L POWERSTROKE BANJO BOLT KIT Fits 94-03 7.3L Powerstroke Diesel Installation Guide INSPECT CONTENTS OF THIS KIT THOROUGHLY BEFORE STARTING THE INSTALLATION PROCESS! IF YOU FIND A PROBLEM WITH YOUR PACKAGE:
More informationFeatures and Benefits
Features and Benefits ELECTRICAL DESIN z 1 500 HP; 2, 4, 6 pole z 3600, 1800, 1200 RPM z 3 Phase, 60 Hz, 460V z Motors can be rerated for 380, 400 and 415 VAC at 50 Hz. z Designed to meet NEMA M1, M13,
More informationMotor Accessories. NEMA AC Motor C-Face Kits for Field Conversion
Gearmotors and PT Components Grinders Gearmotors Servo s Mod Express Baldor Education Workshop 396 NEMA AC C-Face Kits for Field Conversion Description Type/ NOTE: NEMA BA Dimension will be non-standard
More informationThe Enclosed Altistart 22 Soft Start/Soft Stop Motor Controller
The Enclosed Altistart 22 Soft Start/Soft Stop Motor Controller A pre-engineered solution with an integrated circuit breaker disconnect and an Altistart 22 soft start in a stand-alone enclosure Make the
More informationModels & Options Lubrication. 1/2 Through 10 Hp Models 1Ø 3Ø 1/2 Through 10 Hp Models 1Ø and 3Ø
P U R E A I R T E C H N O L O G Y Climate Control Duplex Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
More information1/3-3 HP 1PH & 3PH TEFC 60 Hz NEMA AC Foot Mounted and Round Body C-Face Motors
/3-3 HP PH & 3PH TEF 60 Hz NEMA A Foot Mounted and Round Body -Face Motors Features Inverter Duty Rated: 3:T & 5:VT (3-Phase only) Service Factor:.5 Design: B Protection Degree: IP55 Enclosure: TEF F mount
More informationW22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
More informationCTi Automation - Phone: Fax: Web:
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net The control & protection you expect in an innovative soft starter design... Flexibility
More informationNEMA Premium, High, and Standard Efficiency Vertical Hollow Shaft Pump Motors RELIABILITY MATTERS
NEMA Premium, High, and Standard Efficiency RELIABILITY MATTERS Blue = 90c 50m 0y 0k Blue = Pantone 285C Gray = 40% Black (For reverse logo use 30%) R E L I A B I L I T Y M AT T E R S Aurora Motors a leading
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationSEWPCC UPGRADING/EXPANSION PROJECT BID OPPORTUNITY SECTION LOW-VOLTAGE AC INDUCTION MOTORS
SECTION 26 20 00 LOW-VOLTAGE AC INDUCTION MOTORS SEWPCC UPGRADING/EXPANSION PROJECT PART 1 GENERAL 1.1 RELATED SECTIONS A. This section applies only when referenced by a motor-driven equipment specification.
More informationBE SURE POWER IS DISCONNECTED PRIOR TO INSALLATION! FOLLOW NATIONAL, STATE, AND LOCAL CODES! READ THESE INSTRUCTIONS ENTIRELY BEFORE INSTALLATION!
INSTALLATION INSTRUCTIONS FOR SYMCOM S MOTORSAVER MODEL 460 BE SURE POWER IS DISCONNECTED PRIOR TO INSALLATION! FOLLOW NATIONAL, STATE, AND LOCAL CODES! READ THESE INSTRUCTIONS ENTIRELY BEFORE INSTALLATION!
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More informationSECTION MOTORS, MOTOR STARTERS, VARIABLE FREQUENCY DRIVES AND ELECTRICAL WORK
PART 1 - GENERAL 1.1 GENERAL: SECTION 15150 MOTORS, MOTOR STARTERS, VARIABLE FREQUENCY DRIVES AND ELECTRICAL WORK A. The Mechanical Contractor shall furnish to the Electrical Contractor for installation,
More informationAutomationDirect AC Motors Selection Overview
AutomationDirect AC s Selection (1992), High, What does it all mean? In 1992, the U.S. Congress passed legislation requiring that general purpose Design A & B motors meet minimum efficiency requirements,
More informationM T E C o r p o r a t i o n MATRIX FILTER. SERIES B Volts, 50HZ USER MANUAL PART NO. INSTR REL MTE Corporation
M T E C o r p o r a t i o n MATRIX FILTER SERIES B 380-415 Volts, 50HZ USER MANUAL PART NO. INSTR - 015 REL. 040709 2003 MTE Corporation IMPORTANT USER INFORMATION NOTICE The MTE Corporation Matrix Filter
More informationProduct guide. Enclosed NEMA starters. Answers for industry.
Product guide Enclosed NEMA starters Answers for industry. The right choice for applications that demand the best Siemens NEMA combination and non-combination starters for industrial and construction applications
More informationVS1PFB 230V, 50/60 Hz, 3-Phase
Farm Duty Unit Handling Brake 200 & 575 Volt Pump and Fan Bypass AC Drive 7.5 thru 40 Hp 7.5 thru 125 Hp & Controls 230 VAC 460 VAC 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications: Pump and Fan AC Drive
More informationNEMA AC Motor C-Face Kits for Field Conversion
Gear s NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting Baldor 56 through 445T frame rigid base motors to C-Face mounting with base. For a Baldor
More informationStormPro BA Series Sump Pump
Page 1 of 8 Marks & Meanings DANGER: Keep the pump equipment out of the reach of children! Warns that the failure to follow the directions given could cause serious risk to individuals or objects. WARNING:
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationSHADED RATINGS ARE CAST IRON FRAMES
Gearmotors and NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting 56 through 445T frame rigid base motors to C-Face mounting with base. For a conversion,
More informationSECTION VARIABLE FREQUENCY DRIVE UNITS
SECTION 26 29 23 PART 1 - GENERAL 1.1 THE REQUIREMENT A. General: The CONTRACTOR shall provide variable frequency drive (VFD) units, complete and operable, in accordance with the Contract Documents. It
More informationM T E C o r p o r a t i o n MATRIX FILTER. SERIES B Volts, 50HZ USER MANUAL PART NO. INSTR REL MTE Corporation
M T E C o r p o r a t i o n MATRIX FILTER SERIES B 380-415 Volts, 50HZ USER MANUAL PART NO. INSTR - 015 REL. 060628 2006 MTE Corporation IMPORTANT USER INFORMATION NOTICE The MTE Corporation Matrix Filter
More informationWF-5100 Series True Sine Wave Inverters
Operator s Manual WF-5100 Series True Sine Wave Inverters WF-9900 Series WF-5118 WF-5120 ( The Inverter model number is located on the label on top of the enclosure) Distributed in the U.S.A. and Canada
More informationPump Installation and Service Manual HRS Hydromatic Retractable System
Pump Installation and Service Manual HRS Hydromatic Retractable System NOTE! To the installer: Please make sure you provide this manual to the owner of the pumping equipment or to the responsible party
More informationMV Series Motors Operation & Parts Manual. Models M3V, M5V, M5V-US
MV Series Motors Operation & Parts Manual Models M3V, M5V, M5V-US Introduction This manual pertains to drum pump motors MV Series. Finish Thompson, Inc. thanks you for choosing our products. We believe
More informationPRODUCTIVITY HAS A NAME. Torque Master Motors
PRODUCTIVITY HAS A NAME Torque Master Motors Premium Efficient Torque Master Motors TORQUE MASTER PE A FORCE TO BE RECKONED WITH Quality. Performance. Dependability. That s what the Torque Master series
More informationINDUSTRIES AMERICAN COOLAIR CORPORATION. Centrifugal Filtered Supply Roof Ventilators TYPE CFS - TYPE SIS
INDUSTRIES AMERICAN COOLAIR CORPORATION Centrifugal Filtered Supply Roof Ventilators TYPE CFS - TYPE SIS CFS Centrifugal Filtered Supply Fans Applications The CFS Centrifugal Filtered supply fans with
More informationProduct Guide. enclosed NEMA STARTERS
Product Guide enclosed NEMA STARTERS The Right Choice for Applications that Demand the Best. Siemens NEMA Combination and Non- Combination Starters for Industrial and Construction Applications Rugged,
More informationWF-5110R True Sine Wave Inverter
Operator s Manual WF-5110R True Sine Wave Inverter WF-9900 Series WF-5110R ( The Inverter model number is located on the label on top of the enclosure) Distributed in the U.S.A. and Canada by ARTERRA DISTRIBUTION
More informationInstallation / Operation Instructions Sunnex ORION Series Exam Lights
Installation / Operation Instructions Sunnex ORION Series Exam Lights OR-120 OR-127 OR-220 OR-227 Models: OR-300 OR-400 OR-500 OR-600 1. APPLICATIONS The Sunnex ORION Series light was designed specifically
More informationFemale Plug. connecting to Fuel Quantity
**Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire
More informationDual ground lug - one lug for earth ground, one lug for utility ground.
The Type 3R Package is specifically designed for Yaskawa Variable Frequency Drives. The Type 3R outdoor duty package is not just a "NEMA 3R" self-declared rating. Yaskawa went beyond its own stringent
More information300% Motor full load amps at 80 seconds, 400% Motor full load amps at 35 seconds
Digital Soft Start Controls 9 thru 900 Amps 208-460V 50/60 Hz. 9 thru 900 Amps 208-575V 50/60 Hz. Applications: Controlled ramp start and stop, minimize spillage in material handling, reduced water hammer
More informationProduct guide. Enclosed NEMA starters. usa.siemens.com/controls
Product guide Enclosed NEMA starters usa.siemens.com/controls The right choice for applications that demand the best Siemens NEMA combination and non-combination starters for industrial and construction
More informationMatrix APAX. 380V-415V 50Hz TECHNICAL REFERENCE MANUAL
Matrix APAX 380V-415V 50Hz TECHNICAL REFERENCE MANUAL WARNING High Voltage! Only a qualified electrician can carry out the electrical installation of this filter. Quick Reference ❶ Performance Data Pages
More informationOPERATING MANUAL. centrifugal fan SAFETY PRACTICES
2237 MARSHALLTOWN BLVD. MARSHALLTOWN, IOWA 50158 PHONE: (641) 753-5601 TOLL FREE: 1-800-383-5601 FAX: (641) 752-9748 WWW.SPREAD-ALLMFG.NET OPERATING MANUAL centrifugal fan SAFETY PRACTICES 1. Have a qualified
More informationThree Phase Modifiable NEMA Horizontal Motors Accessories and Modifications
1. Altitude Standard motors are designed for 3,300 feet altitude and 40 C ambient temperature. Atmospheric conditions at higher altitudes inhibit the motor s ability to dissipate heat, resulting in an
More information5 Year / 160,000 km (100,000 mi) ** 1 Year / 30,000 km (19,000 mi) 3 Year / 100,000 km (62,000 mi)
WARRANTY REGISTRATION FORM 5 Year / 160,000 km (100,000 mi) WARRANTY Please read & fill out the attached warranty registration form to activate your warranty Your warranty registration must be received
More informationDefinite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. Applications: Fans, blowers, machine tools, hoists, conveyors, pumps.
Three Phase, Two Speed, TEFC, 1 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Lifting eye bolt mounted at top center 215T frame and larger for easy
More informationHA/HAB Fiberglass Wall Mount Ventilators
HA/HAB Fiberglass Wall Mount Ventilators INSTALLATION, OPERATION & MAINTENANCE MANUAL IM-3100 August 2015 Throughout this manual, there are a number of HAZARD S that must be read and adhered to in order
More informationExplosion Proof Motors
SINGLE-PHASE Foot Mount...A-110 C-Face Foot Mount...A-110 THREE-PHASE Foot Mount...A-112 C-Face Foot Mount...A-116 C-Face Footless...A-117 JP Foot Mount...A-117 ATEX Foot Mount...A-120 A-108 Fractional
More information