LIGHT & SOUND BATH VANITY LIGHT

Size: px

Start display at page:

Download "LIGHT & SOUND BATH VANITY LIGHT"

Owen Russell Waters
5 years ago
Views:

1 LIGHT & SOUND ATH VANITY LIGHT CONTEMPORARY SLAT 3L SWITCH/NL/T LACK CHROME ITM. / ART Model #: ASSEMLY, INSTALLATION, AND CARE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. FEATURES Easy to Install. Fixture engineered to safely use energy-saving Light Emitting Diodes (LED s). NOTE: This product is an LED light fixture. It contains its own light source and does not require the purchase of light bulbs. WARNING: To reduce the risk of injury read these instructions thoroughly. WARNING: efore starting installation of this fixture or removal of an existing fixture disconnect the power by turning off the circuit breaker or by removing fuse at fuse box. WARNING: Consult a qualified electrician if you have any electrical questions. Made in China

2 PARTS & SPECIFICATIONS TOOLS REQUIRED Phillips Screw Driver Flat Head Screwdriver Drill (Option 2 only) Drill it 7mm (9/32 ) (Option 2 only) Ladder Level Safety Goggles CC HARDWARE INCLUDED 2 Mounting Plate Screws (Pre-installed) 2 #8-32 x 1 Electrical ox Mounting Screws (Option 1) CC 2 Nuts 2 Capstone Quick Connector (1 Pre-wired; 1 Loose) EE 2 - #4 x 1 Self-Tapping Wall Mounting Screws (Option 2) FF 2 Plastic Wall Anchors (Option 2) GG 1 White Cleaning Cloth EE FF GG DIAGRAM A Light Fixture Mounting Plate C Electrical ox Screw Hole (Option 1) D Wall Mounting Screw Holes (Option 2) E Screw (Green, Pre-installed) Mounting Plate Screws (Pre-installed) F ON/OFF Rocker Switch G Electrical ox (not included) D G C E ottom INSTALLATION IMPORTANT: This fixture has two installation options. OPTION 1 ANCHOR TO AN ELECTRICAL OX OPTION 2 ANCHOR TO A WALL A oth OPTION s require powering the fixture using a standard 4 octagonal recessed electrical box (G). WARNING: Consult a qualified electrician if you have any electrical questions. WARNING: efore starting installation of this fixture or removal of an existing fixture disconnect the power by turning off the circuit breaker or by removing fuse at fuse box. IMPORTANT: Notice the position of cutouts on the Mounting Plate. Cutouts must be positioned correctly for proper mounting. F

3 G Fig 1 Wall OPTION 1 ANCHORING TO AN ELECTRICAL OUTLET OX 1. If replacing an existing fixture remove. Fig 2 2. Remove Mounting Plate () from Light Fixture (A) by removing pre-installed Mounting Plate Screws (). 3. Capstone Quick Connector () to Electrical ox (G) using Nuts (CC) (white wire to white wire / black wire to black wire) and attach Wall to the Electrical ox (Fig 1). 4. ring Capstone Quick Connector () through center hole in Mounting Plate () (Fig 2). 5. Align and anchor Mounting Plate () to Electrical ox (G) using Electrical ox Mounting Screws (). Make certain the Mounting Plate bottom is facing downward. 6. Connect Capstone Quick Connector () pre-wired to Light Fixture (A) to Capstone Quick Connector () wired to Electrical ox (G) and attach Light Fixture to Screw (E) (Fig 3). 7. Place Rocker Switch (F) in ON position to activate Night Light feature. 8. Align Light Fixture (A) in Mounting Plate () and secure with Mounting Plate Screws (). Fig 3 E Fixture A Wall EE G Wall Fig 4 Fig 5 Fig 6 Wall E Fixture OPTION 2 ANCHOR TO A WALL 1. If replacing an existing fixture remove. 2. Remove Mounting Plate () from Light Fixture (A) by removing preinstalled Mounting Plate Screws (). 3. Align Mounting Plate () on wall centering over Electrical ox (G). Make certain the Mounting Plate bottom is facing downward. 4. Mark location of Wall Mounting Screw Holes (D) with pencil/pen. 5. Remove Mounting Plate () from wall and drill holes using 7mm (9/32 ) drill bit 6. Insert Plastic Wall Anchors (FF). 7. Capstone Quick Connector () to Electrical ox (G) using Nuts (CC) (white wire to white wire and black wire to black wire) (Fig 4). 8. ring Capstone Quick Connector () and Wall through center hole in Mounting Plate () (Fig 5). 9. Anchor Mounting Plate () to wall by securing Self-Tapping Wall Mounting Screws (EE) into Plastic Wall Anchors (FF). 10. Connect Capstone Quick Connector () pre-wired to Light Fixture (A) to Capstone Quick Connector () wired to Electrical ox (G) and attach Wall and Light Fixture to Screw (E) (Fig 6). 11. Place Rocker Switch (F) in ON position to activate Night Light feature. 12. Align Light Fixture (A) in Mounting Plate () and secure with Mounting Plate Screws (). A

4 LIGHT & SOUND ATH VANITY LIGHT CONTEMPORARY SLAT 3L SWITCH/NL/T LACK CHROME OPERATION ATH VANITY LIGHT Turn Light Fixture ON/OFF using Wall Switch. 900 Lumen brightness (300 Lumen per lamp). Turning Light Fixture OFF automatically activates the Night Light function when Rocker Switch is in ON position. NIGHT LIGHT The Light Fixture has a built in Motion Sensor, night light feature powered by a rechargeable battery pack. To activate the Night Light feature place and leave the Rocker Switch in the ON position. Turning the Light Fixture Wall Switch OFF activates the Night Light function. Night Light turns on automatically when motion is detected in low light. 30 Lumen brightness (10 Lumen per lamp). Night Light turns off automatically after 90 seconds if no motion is detected. Night Light will not turn on during daylight. Turning the Light Fixture Wall Switch ON deactivates the Night Light function. To deactivate the Night Light feature place and leave the Rocker Switch in the OFF position. LUETOOTH The Light Fixture has 2 luetooth V2.1 enabled speakers. Speakers activate when Light Fixture Wall Switch is in ON position and deactivate when Wall Switch is in OFF position. Speakers do not work when Night Light function is activated. To pair your device to luetooth speakers refer to your device s User Guide.

5 REPLACING THE ATTERY PACK The Night Light is powered by a Li-ion 11.1V 2000mAh rechargeable attery Pack. To replace follow these steps. Li-ion 11.1V 2000mAh attery Pack WARNING: Consult a qualified electrician if you have any electrical questions. WARNING: efore replacing attery Pack disconnect the power by turning off the circuit breaker or by removing fuse at fuse box. Fig 7 Fig 9 A H F 1. Place Rocker Switch (F) in OFF position. ack side (A) Fig 8 2. Remove Light Fixture (A) from Mounting Plate () by removing Mounting Plate Screws () and disconnect Capstone Quick Connectors () and ground wires (Fig 7). 3. Locate attery Pack Compartment (H) on back of Light Fixture (A) and open (Fig 8). 4. Replace with Li-ion 11.1V 2000mAh rechargeable battery pack. Reattach the battery pack wires using the snapin connector. Match the black and red wires with the fixture wires. Place the exposed wire into the connector and lock into place using the snap clamp (Fig 9). 5. Close attery Compartment (H). 6. Reconnect Capstone Quick Connectors () and ground wires (Fig 7). 7. Place Rocker Switch (F) in ON position to activate Night Light feature. 8. Align Light Fixture (A) in Mounting Plate () and secure with Mounting Plate Screws ().

6 CARE AND CLEANING Clean the Light Fixture with the Cleaning Cloth (GG) included. Do not use cleaners with chemicals, solvents or abrasives. TROULESHOOTING Problem Possible Cause Solution The Light Fixture does not light The power is off Ensure the power supply is on The fuse blows or circuit breaker trips when the Light Fixture is turned on The Night Light does not light in dark area when there is motion The luetooth speakers do not work Faulty wire connections The circuit breaker is off Crossed wires or power wire is grounding out The Rocker Switch is in OFF position The Wall Switch is in OFF position The luetooth speakers are not paired to the smartphone Check wiring Ensure the circuit breaker is in ON position. Check wire connections Ensure Rocker Switch is in ON position Ensure Wall Switch is in ON position Check smartphone User Guide 1. For cleaning, use a soft dry cloth. 2. For decorative indoor use only. WARNING

7 One Year Limited Warranty Capstone Industries Inc., warrants to the original retail purchaser, this product to be free of defects in material and workmanship for a period of up to one year from date of original purchase. Warranty applies only to the original purchaser of the product. Warranty is limited to consumer use and does not cover parts damaged due to normal wear, abnormal conditions, misuse, or accidents, and is limited to repair or replacement only. This limited warranty does not cover batteries, or any part that may become defective due to mishandling. Warranty is effective only upon presentation of dated proof of purchase. Customers are responsible for all postage costs on returned merchandise. No shipping or handling charges will be reimbursed. NOTE: Limitations on Warranty Disclaimers There are no warranties which extend beyond the description on the face hereof. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This equipment has been tested and found to comply with the limits for a Class Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

8 For assistance with assembly or installation, parts and customer service, please do not return to retailer - contact Capstone CUSTOMER SERVICE at: USA Toll Free: (English only) Hours of Operation: Monday - Friday 9AM - 5PM EST mail: info@capstoneindustries.com website: Protecting the Environment - Recycle It Reponsibly recycling these products saves natural resources and protects human health through reuse of reclaimed resources. Please call your local waste management company for vendors in your immediate area. 10/

USE AND CARE GUIDE 15 INCH WHITE ROUND FLAT PANEL FIXTURE WITH SELECTABLE COLOR TEMPERATURE

74212 USE AND CARE GUIDE 15 INCH WHITE ROUND FLAT PANEL FIXTURE WITH SELECTABLE COLOR TEMPERATURE FEIT ELECTRIC COMPANY PICO RIVERA, CA (800) 543-3348 FAX (562) 908-6360 www.feit.com Table of Contents