BILLY GOAT MV650H PUSH Vacuum Owner s Manual

Transcription

1 Accessories BILLY GOAT MV650H PUSH Vacuum Owner s Manual Caster Kit Hose Kit Bag Liner Kit Felt Bag Kit Use on hard surface For vacuuming hard To collect leaves, Use on all dusty for maneuverability. to reach areas. thatch, and grass. conditions. P/N P/N P/N P/N Part No Form No F052108B

2 ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT MV Vacuum. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your MV Vacuum in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS Serial Plate Data... 3 Specifications... 3 Common Replacement Parts... 3 General Safety Instructions and Symbols Sound Data... 6 Vibration Data... 6 Intended Use... 6 Instruction Labels... 7 Engine Labels... 7 Assembly Instructions Operation Operator Controls Starting Height/Nozzle Door Adjustment Handling and Transporting Storage Maintenance Periodic Maintenance Impeller Removal Wiring Diagrams Troubleshooting Engine Maintenance and Repair Warranty Claim Procedure Maintenance Record Illustrated Parts List Part No Form No F052108B

3 SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: MV 650 SERIES SPECIFICATIONS Engine Type Horsepower MV650 Honda GSV190AA1A 6.5 (4.85 kw) Fuel Capacity 1.6 qt (1.5 L) Oil Capacity Engine Weight Unit Weight Shipping Weight Overall Dimensions Maximum Operating Slope 20 In accordance with 2000/14/EEC standards Sound at Operators ear 0.69 qt (0.65L) 28 lbs (12.7 kg) 157 lbs (71.2 kg) 180 lbs (81.7 kg) 28 Wide x 62.5 Long x 45.5 High 103 db(a) at 3320 rpm 83 db(a) at 3320 rpm COMMON REPLACEMENT PARTS Bag. P/N Original equipment replacement bag. Skid. P/N Nozzle wear guard skid. Form No F052108B 3 Part No

4 GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipment. This symbol indicates gloves should be worn when servicing this equipment. This symbol indicates that this manual and the engine manufacturer s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT MV Vacuum. This symbol indicates the engine oil level should be checked before operating this equipment. Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this equipment: READ this manual and the engine manufacturer s manual carefully before assembling, operating, or servicing this equipment. EAR PROTECTION is recommended when operating this equipment. EYE PROTECTION is recommended when operating this equipment. EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply on federal lands. DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison. Part No Form No F052108B

5 DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated. DO NOT smoke while filling the fuel tank. DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester. DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary. DO NOT operate engine with grass, leaves or other combustible material near the muffler. DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns. DO NOT leave equipment unattended while in operation. DO NOT park equipment on a steep grade or slope. DO NOT operate equipment with bystanders in or near the work area. DO NOT allow children to operate this equipment. DO NOT operate equipment with guards removed. DO NOT operate equipment near hot or burning debris or any toxic or explosive materials. DO NOT operate equipment on slopes greater than specified in Specifications section of this manual. ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting. ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. ALWAYS keep hands and feet away from moving or rotating parts. ALWAYS store fuel in approved safety containers. Form No F052108B 5 Part No

6 SOUND DATA SOUND LEVEL 103 Dba at Operator Position Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. General Conditions: Sunny Temperature: 66.2 o F (19 o C) Wind Speed: 8.5 mph (13.7kph) Wind Direction: South Southwest Humidity: 59% Barometric Pressure: 29.9 Hg (101.35kPa) VIBRATION DATA VIBRATION LEVEL 1.43g(14.00m/s 2) Vibration levels at the operator s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on under the conditions listed below. General Conditions: Sunny Temperature: 73.7 o F (23.2 o C) Wind Speed: 8.05 mph (3.6m/s) Wind Direction: South Humidity: 83.5% Barometric Pressure: Hg ( kpa) INTENDED USE Your BILLY GOAT MV Vacuum is designed for vacuuming leaves, grass clippings, and other types of organic litter, as well as, debris mixed with cans, bottles and small amounts of sand; however, vacuuming cans, bottles and sand will affect the longevity of your machine. Like all mechanical tools, reasonable care must be used when operating the machine. Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See impeller removal section for bolt torque specifications. (page 18). Part No Form No F052108B

7 INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT MV Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. PN (See Figure 3 Item 55) PN (See Figure 4 Item 162) PN (See Figure 1 Item 34) PN (See Figure 1 Item 11) PN (See Figure 4 Item 174) PN (See Figure 4 Item 163) PN (See Figure 4 Item 175) ENGINE LABELS CONTROLS PN (See Figure 3 Item 57) Form No F052108B 7 Part No

8 MV Vacuum Assembly Drawing Part No Form No F052108B

9 PARTS LIST Form No F052108B 9 Part No

10 ASSEMBLY INSTRUCTIONS Your BILLY GOAT MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed on the lower handle and the Housing assembly. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Hood/Upper Handle Assembly is attached to the unit by cables. Remove unit from carton. Make sure the following items that have been packed with unit: Parts bag P/N Owner s Manual, P/N Declaration of Conformity, P/N Honda Engine Manual Warranty Card, P/N Ty-Wraps (2 ea) Hardware Bag P/N DISCONNECT spark plug wire before assembling unit. 1. Attach hood assembly to the housing then hold in place during the step 2. NOTE: BE SURE ALL CABLES ARE ROUTED ON THE UNDERSIDE OF THE HOOD AND HOUSING. 2. Install item #170 center bolt first when aligned with a nut on the housing. 3. Attach rest of hood assembly to the housing using corresponding hardware. NOTE: You will have to insert the bolt/washer from the inside by reaching through the hood. 1st - Two 7/16 wrenches. Part No Form No F052108B

11 4. Attach upper handle brace to lower handle using corresponding hardware. Then repeat this step on the other side. 5. Attach rod end (164) to the nozzle door rod then secure in place by tightening jam nut. 6. Attach nozzle door rod to the nozzle door using corresponding hardware. NOTE: It is easier to do this with nozzle door closed. - Two 1/2 wrenches. - Two 9/16 wrenches. 7. Attach rod end to rod (as in step 5). 8. Attach nozzle door rod to the lever with nozzle door closed and lever in hose kit position. NOTE: Check to see nozzle door open and close all the way (see page 15). Tighten or loosen the rod end (164) for any adjustments. 9. Install cable ty wraps. 10. Reconnect spark plug wire. 11. Attach the bag. HERE Two 9/16 wrenches. HERE Form No F052108B 11 Part No

12 OPERATION DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated. DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary. DO NOT operate engine with grass, leaves, or other combustible material near the muffler. DO NOT touch muffler, cylinder or cooling fins while engine is running. Contact with hot surfaces may cause severe burns. DO NOT operate equipment with bystanders in or near the work area. DO NOT operate equipment with guards removed. DO NOT operate equipment in areas containing rock, glass, string-like material, wire, rags, cans, metal, or other non-organic material. DO NOT operate equipment on slopes greater than specified in Specifications section of this manual. DO NOT operate equipment near hot or burning debris or any toxic or explosive materials. DO NOT allow children to operate this equipment. ALWAYS keep hands and feet away from moving or rotating parts. EAR PROTECTION is recommended when operating this equipment. EYE PROTECTION is recommended when operating this equipment. Part No Form No F052108B

13 OPERATOR CONTROLS The operator s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine. Operator s controls are shown below Operator Control Locations STARTING 1 Nozzle Door Adjuster 4 Throttle Control 2 Bag Latch 3 Pull Starter CHECK engine oil level before operating machine. 1. Place equipment on a level, firm surface that is free of rocks or other debris. 2. Place throttle in CHOKE position. Throttle DO NOT START equipment without the debris bag in place. Form No F052108B 13 Part No

14 3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine. PULL ROPE STARTER WITH RIGHT HAND SECURE UNIT AT THE HANDLE WITH LEFT HAND DURING START PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback. 4. Move throttle control back to RUN position and allow engine to reach correct operating speed. VACUUM NOZZLE HEIGHT ADJUSTMENT FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank handle clockwise and counter-clockwise. Part No Form No F052108B

15 VACUUM NOZZLE DOOR ADJUSTMENT The vacuum nozzle door adjusts for the maximum performance under various applications. Nozzle fully opened. This is ideal for turf application Nozzle half way opened. This is ideal for hard surface application Nozzle closed for OPTIONAL hose kit. This is ideal TO USE WITH THE HOSE KIT. Form No F052108B 15 Part No

16 VACUUMING OPERATION This machine is designed for vacuuming leaves, grass clippings, and other types of organic litter. Debris mixed with cans, bottles, and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles, and sand will affect the longevity of your machine. In dusty conditions it maybe necessary to purchase Felt Bag Kit (P/N ). Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 22). SHUT DOWN 1. Pull Throttle Control all the way back to the STOP position. CLEARING A CLOGGED NOZZLE DISCONNECT spark plug wire before servicing unit. 1. Shut engine off and wait for impeller to stop completely. 2. Disconnect spark plug wire. 3. Wearing durable gloves, remove clog. WEAR durable gloves. Clog may contain sharp materials. 4. Reconnect spark plug wire. DEBRIS BAG Debris bags are normal replaceable wear items. Frequently empty debris to prevent bag overloading with more weight than you can lift. Bag liners are available for use in various conditions where debris will be vacuumed. (see Bag Liner Options shown on page 1). DO NOT place bag on or near hot surface, such as engine. Be sure engine has come to a complete stop before removing or emptying bag!!. This vacuum is designed for picking up trash, organic material and other similar debris (see Safety Warnings page 4-5). Many vacuums are used where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas. However, following these rules will help maintain your machine's ability to vacuum in dusty conditions: Run machine at idle to quarter throttle. Machine or pressure-wash debris bag if normal cleaning does not fully clean bag. Bag should be thoroughly dry before use. Part No Form No F052108B

17 Having one or more spare bags (840189) is a good way to reduce down time while dirty bags are being cleaned. Hint! Felt Bag (840194) accessory is great when used in dusty conditions. HANDLING and TRANSPORTING Using two people to lift unit is recommended. Lift holding the handle and front of nozzle. Make sure equipment is properly secured before transporting. See MV650 series specifications on page 3 for unit weight. NEVER lift the machine while the engine is running. STORAGE DO NOT store engine in an enclosed or poorly ventilated area where fuel fumes may reach an open flame or spark from a furnace, water heater, clothes dryer or similar devices. DO NOT drain fuel in an enclosed or poorly ventilated area. DO NOT smoke when draining fuel. DO NOT remove gas cap while engine is running. DO NOT park equipment on a steep grade or slope. ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting. ALWAYS keep hands and feet away from moving or rotating parts. ALWAYS store fuel in approved safety containers. If the equipment will not be used for 30 days or more, prepare as follows: 1. Make sure engine is cool. 2. Drain gasoline from carburetor and fuel tank to prevent formation of gum deposits. 3. Run engine until tank is empty and engine runs out of gas. Fuel stabilizer (such as Sta-Bil TM ) is an acceptable alternative for minimizing the formation of gum deposits during storage. Add stabilizer to gasoline in storage container or fuel tank. Follow stabilizer manufacturer s instructions to determine proper mix ratio. Run engine at least 10 minutes after adding stabilizer to allow it to reach carburetor. Form No F052108B 17 Part No

18 MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Daily or Every 5 Hours Every 25 Hours Every 50 Hours Every Hours Inspect for worn or damaged parts. Check for excessive vibration Inspect for loose parts. Clean Debris Bag Lubricate throttle control cable and linkage. NOTE: Use white lithium grease or equivalent IMPELLER REMOVAL READ all safety instructions before servicing unit. DISCONNECT spark plug wire before servicing unit. Tools required: - 1/2 socket, 3/8 drive and 3/8 ratchet - drive extension, 3/8 drive - universal joint, 3/8 drive - pry bar or long screwdriver - jack stands or similar device adequate to support weight of machine. 1. Wait for engine to cool and disconnect spark plug. 2. Drain fuel and oil from the engine. 3. Remove engine, impeller and mounting plate by removing bolts around outside of housing. 4. Leaving engine fastened to plate, remove impeller bolt and lock washer and slide impeller off crankshaft (A puller may be required). CAUTION: Do not drop impeller. 5. If impeller does not slide off crankshaft, place two crowbars between impeller and housing on opposite sides. Pry impeller away from engine until it loosens. Using a penetrating oil can help loosen a stuck impeller. 6. If the impeller cannot be loosened, obtain a 3/8-24x3 ¾ longer bolt of the same diameter and thread type as the impeller bolt. Invert engine and impeller and support engine above ground to prevent recoil damage. Thread longer bolt by hand into the crankshaft until bolt bottoms. Using a suitable gear or wheel puller against the bolt head and the impeller back-plate (near the blades), remove impeller from shaft. 7. To reinstall impeller, use a new impeller bolt and lockwasher 8. Tighten impeller bolt. Torque impeller bolt to Ft. Lbs. (45-51 N.m). 9. Reinstall engine, impeller, and mounting plate onto housing in reverse order of removal. 10. Before connecting spark plug wire, slowly pull engine starting rope to insure that impeller rotates freely. 11. Reconnect spark plug wire. Part No Form No F052108B

19 WIRING DIAGRAMS Bag Switch Circuit Schematic Diagram TROUBLESHOOTING Problem Possible Cause Solution Will not vacuum or has poor vacuum performance. Dirty or full debris bag or filter. Clean debris bag and filter. Shake bag clean or wash. Nozzle height set too high or too low. Adjust nozzle height (see page 14). Hose kit cap missing. Check for hose kit cap. Clogged nozzle or exhaust. Unclog nozzle or exhaust (see page 16) Excessive quantity of debris. Allow air to feed with debris. Abnormal vibration. Loose or out of balance impeller. Check impeller and replace if required. Loose engine. Check engine (see page 24 ). Engine will not start. Throttle in off position. Check throttle control (see page 13). Engine not in full choke position. Check throttle, choke position (see page 13). Out of gasoline or bad, old gasoline. Check gasoline. Spark Plug wire disconnected. Connect spark plug wire. Gas valve off. Turn on gas valve. Dirty air cleaner. Clean or replace air cleaner. Contact a qualified service person. Safety Interlock disengaged on bag plate. Latch the bag properly or check thr bag rod to see if it's bent. Engine is locked, will not pull over. Impeller plugged or clogged. Remove debris (see page 16). Engine problem. Contact an engine servicing dealer for engine problems. Form No F052108B 19 Part No

20 ENGINE MAINTENANCE AND REPAIR Refer to the engine manufacturer s manual for maintenance and service information. Warranty coverage on the engine is the responsibility of the engine manufacturer. If your engine requires warranty repair contact your local servicing engine dealer. Have your engine model number and serial number ready when you contact the dealer. If you cannot locate a servicing dealer in your area, you may contact the manufacturer s national service organization at the following numbers: American Honda (800) WARRANTY CLAIM PROCEDURE Should a BILLY GOAT machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows: The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer. The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt. The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim. The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received. The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding. Part No Form No F052108B

21 MAINTENANCE RECORD Date Service Performed Form No F052108B 21 Part No

22 ILLUSTRATED PARTS LIST Nozzle Assembly Figure 1 Part No Form No F052108B

23 Nozzle Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION MV650H QTY YOKE 1/ PIN YOKE 1/2" BOLT CARRIAGE 3/8-16X1 1/2" ZP WASHER 3/8" SAE ZP NUT LOCK 3/8-16 LT WT THIN ZP SCREWCAP 5/16-18 x 3 1/ NYLON INSERT LOCKNUT 5/16-18 UNC WASHER FLAT FENDER 5/ NYLON INSERT LOCKNUT 1/2-13 UNC THIN WASHER 1/4" FC ZP LABEL WARNING OPEI BOLTCARRIAGE 5\16-18X3 1\ ROLL PIN 1/4 X 1 LONG WASHER 1/2" SAE ZP NOZZLE MV VAC ASSEMBLY CAP 5 IN HOSE VAC HANDLE LOWER MV VAC WHEEL 14" ASSEMBLY WITH BEARING AND TIRE AXLE FRONT WA MV VAC HGT ADJ WA W/LABEL MV VAC SCREWCAP 1/4-20 x 0.75 HWH LINK HGT ADJ MV VAC BRACKET NOZZLE WEAR GUARD MV VAC ROD CONNECT HGT ADJ BUSHING 0.5" ID OD X X ROD HANDLE CRANK ASSEMBLY HANDLE CRANK 0.5 ID X 3.72 LONG BUSHING 3/8" ID 1/2" OD X 3/8" LONG WASHER LOCK 1/4" TWISTED TOOTH NUT PAL 0.5" ID X 0.75 OD NOZZLE COVER MV VAC LABEL PRODUCT DECAL MV SCREW PLASTIC LABEL HGT ADJ MV VAC SCREW SELF-TAP 5/16 NC X 3/4 HEX BRACKET NOZZLE COVER REINFORMENT MV BOLT CARRIAGE 1/4-20X NUT FLANGE 1/ Form No F052108B 23 Part No

24 Engine Assembly Figure 3 Part No Form No F052108B

25 Engine Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION ENGINE HONDA 6.5 VERTICAL GSV IMPELLER ASSEMBLY PUSH MV VAC TOP PLATE ASSEMBLY PUSH MV VAC HOUSING PLASTIC VAC WASHER LOCK 3/8 TWISTED TOOTH LABEL HOT ENGINE SQ KEY X BRACKET COVER TOP PLATE VAC SCREW 1/4"-20 X 5/8" HWH WASHER 1/4" SAE ZP WASHER FENDER 1/4 ZP SCREWCAP 1/4-20 x 0.75 HWH SCREWCAP 3/8-24X2 3/4" W/PATCH LOCK SCREWCAP 3/8"-16X2 1/2" TAPTITE WASHER SPLIT LOCK 1/4" SPACER 1.50OD X.875ID X.5 THK TERMINAL BLUE T-TAP SCREWCAP 1/4-20X5/8 GR. 5 6 MV650H QTY. Form No F052108B 25 Part No

26 Hood Assembly Figure 4 Part No Form No F052108B

27 Hood Assembly ITEM NO. PART NUMBER DESCRIPTION MV650H QTY CONTROL THROTTLE MV VAC HOOD ASSY W / LABEL MV VAC BRACKET BAG CHANNEL RH W /SEAL MV VAC SEAL BAG MV VAC TUBE HANDLE BRACE RH MV VAC TUBE HANDLE BRACE LH MV VAC BRACKET BAG CHANNEL RH W /SEAL MV VAC BRACKET NOZZLE DOOR ADJ W /LABEL MV VAC BAG ASSEMBLY MV VAC BAR LIFT NOZZLE DOOR W / GRIP MV VAC ROD LIFT NOZZLE DOOR SP VAC PLATE BAG LATCH MV VAC GRIP LEVER LIFT SW ITCH INTERLOCK VAC HARNESS W IRE ASSY MV VAC BOLT CARRIAGE 1/4-20 X W ASHER 1/4" FC ZP NYLON INSERT LOCKNUT 1/4-20 UNC SCREW HEX HEAD #10-24 X 1" W ASHER #10 SAE ZP NYLON INSERT LOCKNUT UNC TY W RAP PIN SCREW 1/ W ASHER 5/16 FLATW ASHER Z/P NYLON INSERT LOCKNUT 5/16-18 UNC SPRING LEVER GZ FIBRE W ASHER SCREW CAP 5/16"-18 X 2 ZP SCREW CAP 1/4-20X1" ZP SCREW CAP 5/16-18 X 1.75 ZP W ASHER 3/8" FC W ASHER 1/4" SAE ZP LABEL EAR EYE BREATHING LABEL READ ROD END BALL JOINT 3/8 NF SCREW CAP 3/8-16X1 1/2 ZP NYLON INSERT LOCKNUT 3/8-16 UNC SCREW CAP 3/8"-16X2 1/2" ZP SEAL BAG FRONT HOOD 20.5 LONG NUT REG 3/8-24 NF SCREW CAP 1/4"-20X3/4" HCS ZP W ASHER FENDER 1/4 ZP SCREW CAP 1/4"-20X4" HCS ZP NUT ACORN 1/ LABEL DANGER FLYING DEBRIS LABEL NOZZLE DOOR MV VAC BOLT CARRIAGE 1/4-20 X 3/4" BRACKET HOOD FRONT STRAIGHTENER PLUG SNAP RIVET DIA PLUG SNAP RIVET DIA ROD BAG W A MV VAC LATCH RUBBER ASSEMBLY MV VAC PAL NUT BAG DEBRIS MV VAC 1 Form No F052108B 27 Part No

28 Rear Axle Assembly Figure 2 Rear Axle Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION MV650H QTY WASHER FLAT 1/2" SAE BOLT CARRIAGE 5/16-18X2 1/ WASHER 1/4" FC ZP NYLON INSERT LOCKNUT 5/16-18 UNC NYLON INSERT LOCKNUT 1/2-13 UNC THIN SHAFT REAR AXLE PUSH VAC BRACKET REAR AXLE MOUNT PUSH MV VAC WHEEL 14" ASSEMBLY WITH BEARING AND TIRE 2 Part No Form No F052108B