elliptipar S43X high-lumen

Transcription

1 elliptipar S43X high-lumen uplights S431 9" W S432 17" W S433 25" W S434 33" W

2 elliptipar S43X uplights high-lumen VPQ1 VPQ2 S431 S432 S433 S Input Watts 172W 337W 503W 669W Delivered umens 14,427 27,877 40,365 51,821 Metal Halide quivalent 250W 400W 2X400W 1000W STY # of Ds *Delivered lumens are based on fixture with visor and 4000K/70+CRI Ds **Based on maintained metal halide delivered lumens S433 20,00 0C d S434 S432 New high-lumen nsconce architectural asyetric uplight by elliptipar in 4 sizes Choice of two visor styles or use with custom designed shroud tailored to the application Wall mounting or pendant mounting in 1-way or back-to-back configurations Precision optics create a distribution ideal for illuminating surfaces evenly from edge to edge All aluminum and stainless steel construction Natatorium option includes gasketed lens and sealed wire entries H igh purity extruded aluminum heat sink designed for optimal heat dissipation Wall plate allows luminaire to hinge open for hands-free access to drivers and wiring Adjustable aiming with positive locking ight engines and drivers are serviceable for replacement or future upgrade CSP (chip scale package) Ds provide industry leading color uniformity Prograable drivers can be set to achieve a specific light output, wattage or PD Multiple CCT/CRI choices 2780, 3080, 3580, 4080, 4070 (others available upon request) Several diing options available down to 0.1% power (0-10V, DAI and more) xcellent lumen maintenance 90(10k)>60, C per TM-21; maintains over 90% of initial light output beyond 60,000 hours TM color reports available online 2018 Sylvan R. Shemitz Designs, C S431 CSA certified for damp locations

3 ighting the Ceiling arge indoor, internal driver Solid State (D) Style S /4" (754) 16-5/8" (422) W mount Style S431, flared cutoff visor 9" (229) 5-3/8" (137) 25" (636) front 9" (229) 10" 253 5" 127 rear view/ mounting W mount Style S431, cutoff visor cross section H D 18-3/8" (468) W mount Style S431, cover lens shown K N M 9" (229) A B G C S431 with cutoff visor Specifications eatures A xtruded aluminum mounting plate/driver cover B xtruded aluminum driver housing C xtruded aluminum heat sink/fixture head D D light engine Integral electronic driver Aluminum reveal plates G Cutoff visor (flared shown) H Decorative cover Aluminum sidearms K ens door Aiming latch M Acrylic lens (0P, VP, P options only) N Door retaining screws Adjustable aiming for fine tuning of ceiling uniformity All aluminum and stainless steel construction Natatorium option for harsh indoor pool environments Universal voltage drivers with prograable drive current ight engines are serviceable for replacement or upgrade 22.0 Housing and Optic Assembly: xtruded aluminum heat sink/housing. xterior heat sink anodized for maximum emissivity. Removable interior extrusion treated to maximize thermal conductivity. Precision extruded asyetric optics of high temperature, water-clear polymer. Optional impact resistant exterior lens. inish: Painted surfaces 6 stage pretreatment and electrostatically applied thermoset polyester powder coating for a durable abrasion, fade and corrosion resistant finish. ormed aluminum visor. xtruded aluminum heat sink/housing, yoke, door frame, and decorative end plates are finished in semigloss white or specified custom color. All luminaire hardware is stainless steel. Mounting: Mounting plate covers recessed outlet box or conduit feed and forms reveal at wall. Suitable backing structure required (by others) weight is approximately 21 lb/7.8 kg. ixture hinges on plate for hands-free access to splices. Required upright pendant mounting assembly ordered and priced separately (see pg. 22.1); specify mounting 1 or 2. lectrical: Use 90 C wire for supply connections. Integral electronic HP constant current drivers. or complete driver specifications, see website, reference document MA Standard: U listed or CSA certified for dry locations (optional damp location rating specify pool option 0P, VP or P). 5 year warranty, maximum ambient temperature 40 C (104 ). Performance Precisely extruded polymer optics produce an asyetric distribution ideal for illuminating ceilings evenly from one edge. or M79 and photometric reports, visit 4000K 70+CRI 5,000 Cd S K 80+CRI 90(10k) > 60, C per TM-21 U.S. and oreign Patents Pending D Product Partner

4 To Order Style S431 To form a Catalog Number Project: Type: S Source S = Solid state (D) 2 Style 431 = arge surface with integral driver 3 umen/wattage Options AMP COD 4 Mounting W = Wall mount over recessed outlet box, uplight only S = Wall mount side surface conduit, uplight only T = Wall mount top surface conduit, uplight only 1 = 1-way pendant uplight, one fixture required mounting 2 = 2-way pendant uplight, two fixtures required mounting 5 inish INPUT WATTS UMNS 99 = Custom RA or computer matched color to be specified; consult sales representative 6 Voltage/Driver lectronic Driver 8 = V 3 = 347V NUMBR O Ds DRIV CURRNT W Ds 500mA Based on visor option with 4000K, 80+CRI Ds. Click here for scaled performance table. lectronic Diing Driver M = V K = 347V 7 Option (See Accessories Section for specifications) 00 = No options 0P = Natatorium (pool) use (includes acrylic lens) V0 = Cutoff visor (5 shielding) VP = Cutoff visor (5 shielding) for natatorium (pool) w/ lens 0 = lared cutoff visor (horizontal shielding) P = lared cutoff visor (horizontal shielding) natatorium w/ lens XX = or modification not listed; include detailed description. Consult factory prior to specification 8 Destination Requirement 0 = U listed or CSA certified for U.S. = U listed or CSA certified for Canada 9 Color Temperature 27 = 2700K, 80+ CRI 30 = 3000K, 80+ CRI 35 = 3500K, 80+ CRI 40 = 4000K, 80+ CRI 4 = 4000K, 70+ CRI Note: Additional CCT and CRI options are available; consult factory. 10 Diing* 00 = Non-diing ZX = 0-10V analog diing V or 347V input, diing range 100%-5%, 0-10V controls by others = eldod SOOdrive V input, 0-10V analog diing 100%-0.1% power (controls by others) D = eldod SOOdrive V input, diing range 100%-0.1%, DAI controls by others *Diing range refers to % power input, % light output will vary. Refer to Driver Information document MA-1303 Required Mounting Hangers Required mounting hangers for pendant mount fixtures are ordered and priced separately. See installation sheets on website. VPQ required for pendant mounting options 1 or 2: VPQ = Uplight pendant 2" x 4" aluminum stem 0 = U.S. = Canada 0 = No option P = Natatorium (pool) = Surface conduit feed Q = Natatorium (pool) and surface conduit feed C = Canopy (leveling plate ±5 ) S = Canopy with pivot up to 30 ength in inches (36" min. up to 120" max.) 99 = Custom finish 1 = One-way VPQ1 2 = Two-way Note: Suitable structure required to support up to 65 lb/25 kg. VPQ2 or additional pendant specifications, see. DO ighting acts label for S431, ma, 4000K/80+CRI shown. elliptipar from The ighting Quotient 114 Boston Post Road, West Haven, Connecticut 06516, USA Voice ax Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change without notice. Copyright 2018 Sylvan R. Shemitz Designs, C, all rights reserved.

5 ighting the Ceiling 24-5/8" (625) 29-3/4" (754) rear /mounting 17" (432) W mount Style S432, flared cutoff visor 10" 253 side front 17" (432) 25" (636) W mount Style S432, cutoff visor N cross section H D S432 with cutoff visor A M K 13-3/8" (340) 10" 253 5" /8" (468) W mount Style S432, cover lens shown Style S432 Solid State (D) arge indoor, internal driver G B C Specifications eatures A xtruded aluminum mounting plate/driver cover C xtruded aluminum heat sink/fixture head B xtruded aluminum driver housing D D light engine Integral electronic driver Aluminum reveal plates K ens door G Cutoff visor (flared shown) H Decorative cover M Acrylic lens (0P, VP, P options only) Aluminum sidearms Aiming latch N Door retaining screws Housing and Optic Assembly: xtruded aluminum heat sink/housing. xterior heat sink anodized for maximum emissivity. Removable interior extrusion treated to maximize thermal conductivity. Precision extruded asyetric optics of high temperature, water-clear polymer. Optional impact resistant exterior lens. inish: Painted surfaces 6 stage pretreatment and electrostatically applied thermoset polyester powder coating for a durable abrasion, fade and corrosion resistant finish. ormed aluminum visor. xtruded aluminum heat sink/housing, yoke, door frame, and decorative end plates are finished in semigloss white or specified custom color. All luminaire hardware is stainless steel. U.S. and oreign Patents Pending Mounting: Mounting plate covers recessed outlet box or conduit feed and forms reveal at wall. Suitable backing structure required (by others) weight is approximately 33 lb/12.3 kg. ixture hinges on plate for hands-free access to splices. Required upright pendant mounting assembly ordered and priced separately (see pg. 23.1); specify mounting 1 or 2. Adjustable aiming for fine tuning of ceiling uniformity All aluminum and stainless steel construction Natatorium option for harsh indoor pool environments Universal voltage drivers with prograable drive current ight engines are serviceable for replacement or upgrade Performance Precisely extruded polymer optics produce an asyetric distribution ideal for illuminating ceilings evenly from one edge. D Product Partner 2700K 80+CRI 10,000 Cd lectrical: Use 90 C wire for supply connections. Integral electronic HP constant current driver. or complete driver specifications, see website, reference document MA Standard: U listed or CSA certified for dry locations (optional damp location specify pool option 0P, VP or P). 5 year warranty, maximum ambient temperature 40 C (104 ). 4000K 70+CRI S432 90(10k) > 60, C per TM-21 or M79 and photometric reports, visit 23.0

6 To Order Style S432 To form a Catalog Number Project: Type: S Source S = Solid state (D) 2 Style 432 = arge surface with integral driver 3 umen/wattage Options AMP COD INPUT WATTS UMNS NUMBR O Ds DRIV CURRNT W Ds 500mA Based on visor option with 4000K, 80+CRI Ds. Click here for scaled performance table. 4 Mounting W = Wall mount over recessed outlet box, uplight only S = Wall mount side surface conduit, uplight only T = Wall mount top surface conduit, uplight only 1 = 1-way pendant uplight, one fixture required mounting 2 = 2-way pendant uplight, two fixtures required mounting 5 inish 99 = Custom RA or computer matched color to be specified; consult sales representative 6 Voltage/Driver lectronic Driver 8 = V 3 = 347V lectronic Diing Driver M = V K = 347V 7 Option (See Accessories Section for specifications) 00 = No options 0P = Natatorium (pool) use (includes acrylic lens) V0 = Cutoff visor (5 shielding) VP = Cutoff visor (5 shielding) for natatorium (pool) w/ lens 0 = lared cutoff visor (horizontal shielding) P = lared cutoff visor (horizontal shielding) natatorium w/ lens XX = or modification not listed; include detailed description. Consult factory prior to specification 8 Destination Requirement 0 = U listed or CSA certified for U.S. = U listed or CSA certified for Canada 9 Color Temperature 27 = 2700K, 80+ CRI 30 = 3000K, 80+ CRI 35 = 3500K, 80+ CRI 40 = 4000K, 80+ CRI 4 = 4000K, 70+ CRI Note: Additional CCT and CRI options are available; consult factory. 10 Diing* 00 = Non-diing ZX = 0-10V analog diing V or 347V input, diing range 100%-5%, 0-10V controls by others = eldod SOOdrive V input, 0-10V analog diing 100%-0.1% power (controls by others) D = eldod SOOdrive V input, diing range 100%-0.1%, DAI controls by others *Diing range refers to % power input, % light output will vary. Refer to Driver Information document MA-1303 Required Mounting Hangers Required mounting hangers for pendant mount fixtures are ordered and priced separately. See installation sheets on website. VPQ required for pendant mounting options 1 or 2: VPQ = Uplight pendant 2" x 4" aluminum stem 0 = U.S. = Canada 0 = No option P = Natatorium (pool) = Surface conduit feed Q = Natatorium (pool) and surface conduit feed C = Canopy (leveling plate ±5 ) S = Canopy with pivot up to 30 ength in inches (36" min. up to 120" max.) 99 = Custom finish VPQ1 1 = One-way VPQ2 2 = Two-way Note: Suitable structure required to support up to 90 lb/35 kg. or additional pendant specifications, see. DO ighting acts label for S432, ma, 4000K/80+CRI shown. elliptipar from The ighting Quotient 114 Boston Post Road, West Haven, Connecticut 06516, USA Voice ax Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change without notice. Copyright 2018 Sylvan R. Shemitz Designs, C, all rights reserved.

7 ighting the Ceiling rear /mounting 32-5/8" (829) 29-3/4" (754) Style S433 Solid State (D) arge indoor, internal driver 25" (635) 25" (635) W mount Style S433, flared cutoff visor side front 25" (635) 25" (636) W mount Style S433, cutoff visor 21-3/8" (543) 10" 253 5" /8" (468) cross section 25" (635) D W mount Style S433, cover lens shown N H M G B C K S433 with cover lens A Specifications eatures A xtruded aluminum mounting plate/driver cover C xtruded aluminum heat sink/fixture head B xtruded aluminum driver housing D D light engine Integral electronic driver Housing and Optic Assembly: xtruded aluminum heat sink/housing. xterior heat sink anodized for maximum emissivity. Removable interior extrusion treated to maximize thermal conductivity. Precision extruded asyetric optics of high temperature, water-clear polymer. Optional impact resistant exterior lens. inish: Painted surfaces 6 stage pretreatment and electrostatically applied thermoset polyester powder coating for a durable abrasion, fade and corrosion resistant finish. ormed aluminum visor. xtruded aluminum heat sink/housing, yoke, door frame, and decorative end plates are finished in semigloss white or specified custom color. All luminaire hardware is stainless steel. U.S. and oreign Patents Pending Aluminum reveal plates K ens door All aluminum and stainless steel construction G Cutoff visor (flared shown) H Decorative cover M Acrylic lens (0P, VP, P options only) Natatorium option for harsh indoor pool environments N Door retaining screws ight engines are serviceable for replacement or upgrade Aluminum sidearms Aiming latch Heavy duty heat sink maintains thermal regulation of Ds Mounting: Mounting plate covers recessed outlet box or conduit feed and forms reveal at wall. Suitable backing structure required (by others) weight is approximately 45 lb/16.8 kg. ixture hinges on plate for hands-free access to splices. Required upright pendant mounting assembly ordered and priced separately (see pg. 24.1); specify mounting 1 or 2. Universal voltage drivers with prograable drive current Performance Precisely extruded polymer optics produce an asyetric distribution ideal for illuminating ceilings evenly from one edge. lectrical: Use 90 C wire for supply connections. Integral electronic HP constant current driver. or complete driver specifications, see website, reference document MA Standard: U listed or CSA certified for dry locations (optional damp location specify pool option 0P, VP or P). 5 year warranty, maximum ambient temperature 40 C (104 ). D Product Partner 20,000 Cd 4000K 70+CRI 2700K 80+CRI S433 90(10k) > 60, C per TM-21 or M79 and photometric reports, visit 24.0

8 To Order Style S433 To form a Catalog Number Project: Type: S Source S = Solid state (D) 2 Style 433 = arge surface with integral driver 3 umen/wattage Options AMP COD INPUT WATTS UMNS NUMBR O Ds DRIV CURRNT W Ds 500mA Based on visor option with 4000K, 80+CRI Ds. Click here for scaled performance table. 4 Mounting W = Wall mount over recessed outlet box, uplight only S = Wall mount side surface conduit, uplight only T = Wall mount top surface conduit, uplight only 1 = 1-way pendant uplight, one fixture required mounting 2 = 2-way pendant uplight, two fixtures required mounting 5 inish 99 = Custom RA or computer matched color to be specified; consult sales representative 6 Voltage/Driver lectronic Driver 8 = V 3 = 347V lectronic Diing Driver M = V K = 347V 7 Option (See Accessories Section for specifications) 00 = No options 0P = Natatorium (pool) use (includes acrylic lens) V0 = Cutoff visor (5 shielding) VP = Cutoff visor (5 shielding) for natatorium (pool) w/ lens 0 = lared cutoff visor (horizontal shielding) P = lared cutoff visor (horizontal shielding) natatorium w/ lens XX = or modification not listed; include detailed description. Consult factory prior to specification 8 Destination Requirement 0 = U listed or CSA certified for U.S. = U listed or CSA certified for Canada 9 Color Temperature 27 = 2700K, 80+ CRI 30 = 3000K, 80+ CRI 35 = 3500K, 80+ CRI 40 = 4000K, 80+ CRI 4 = 4000K, 70+ CRI Note: Additional CCT and CRI options are available; consult factory. 10 Diing* 00 = Non-diing ZX = 0-10V analog diing V or 347V input, diing range 100%-5%, 0-10V controls by others = eldod SOOdrive V input, 0-10V analog diing 100%-0.1% power (controls by others) D = eldod SOOdrive V input, diing range 100%-0.1%, DAI controls by others *Diing range refers to % power input, % light output will vary. Refer to Driver Information document MA-1303 Required Mounting Hangers Required mounting hangers for pendant mount fixtures are ordered and priced separately. See installation sheets on website. VPQ required for pendant mounting options 1 or 2: VPQ = Uplight pendant 2" x 4" aluminum stem 0 = U.S. = Canada 0 = No option P = Natatorium (pool) = Surface conduit feed Q = Natatorium (pool) and surface conduit feed C = Canopy (leveling plate ±5 ) S = Canopy with pivot up to 30 ength in inches (36" min. up to 120" max.) 99 = Custom finish VPQ1 1 = One-way 2 = Two-way Note: Suitable structure required VPQ2 to support up to 120 lb/45 kg. or additional pendant specifications, see. DO ighting acts label for S433, ma, 4000K/80+CRI shown. elliptipar from The ighting Quotient 114 Boston Post Road, West Haven, Connecticut 06516, USA Voice ax Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change without notice. Copyright 2018 Sylvan R. Shemitz Designs, C, all rights reserved.

9 ighting the Ceiling 29-3/4" (754) W mount Style S434, flared cutoff visor Style S434 Solid State (D) arge indoor, internal driver 40-5/8" (1032) rear /mounting 33" (838) 33" (838) side front 33" (838) 25" (636) W mount Style S434, cutoff visor 29-3/8" (746) 10" 253 5" 127 cross section 18-3/8" (468) 33" (838) H W mount Style S434, cover lens shown K D S434 with cutoff visor A N M G B C Specifications eatures A xtruded aluminum mounting plate/driver cover C xtruded aluminum heat sink/fixture head B xtruded aluminum driver housing D D light engine Integral electronic driver Housing and Optic Assembly: xtruded aluminum heat sink/housing. xterior heat sink anodized for maximum emissivity. Removable interior extrusion treated to maximize thermal conductivity. Precision extruded asyetric optics of high temperature, water-clear polymer. Optional impact resistant exterior lens. inish: Painted surfaces 6 stage pretreatment and electrostatically applied thermoset polyester powder coating for a durable abrasion, fade and corrosion resistant finish. ormed aluminum visor. xtruded aluminum heat sink/housing, yoke, door frame, and decorative end plates are finished in semigloss white or specified custom color. All luminaire hardware is stainless steel. U.S. and oreign Patents Pending Aluminum reveal plates K ens door All aluminum and stainless steel construction G Cutoff visor (flared shown) H Decorative cover M Acrylic lens (0P, VP, P options only) Natatorium option for harsh indoor pool environments N Door retaining screws ight engines are serviceable for replacement or upgrade Aluminum sidearms Aiming latch Heavy duty heat sink maintains thermal regulation of Ds Mounting: Mounting plate covers recessed outlet box or conduit feed and forms reveal at wall. Suitable backing structure required (by others) weight is approximately 60 lb/22.4 kg. ixture hinges on plate for hands-free access to splices. Required upright pendant mounting assembly ordered and priced separately (see pg. 25.1); specify mounting 1 or 2. Universal voltage drivers with prograable drive current Performance Precisely extruded polymer optics produce an asyetric distribution ideal for illuminating ceilings evenly from one edge. lectrical: Use 90 C wire for supply connections. Integral electronic HP constant current driver. or complete driver specifications, see website, reference document MA Standard: U listed or CSA certified for dry locations (optional damp location specify pool option 0P, VP or P). 5 year warranty, maximum ambient temperature 40 C (104 ). D Product Partner 25,000 Cd 4000K 70+CRI 2700K 80+CRI S434 90(10k) > 60, C per TM-21 or M79 and photometric reports, visit 25.0

10 To Order Style S434 To form a Catalog Number Project: Type: S Source S = Solid state (D) 2 Style 434 = arge surface with integral driver 3 umen/wattage Options AMP COD INPUT WATTS UMNS NUMBR O Ds DRIV CURRNT W Ds 500mA Based on visor option with 4000K, 80+CRI Ds. Click here for scaled performance table. 4 Mounting W = Wall mount over recessed outlet box, uplight only S = Wall mount side surface conduit, uplight only T = Wall mount top surface conduit, uplight only 1 = 1-way pendant uplight, one fixture required mounting 2 = 2-way pendant uplight, two fixtures required mounting 5 inish 99 = Custom RA or computer matched color to be specified; consult sales representative 6 Voltage/Driver lectronic Driver 8 = V 3 = 347V lectronic Diing Driver M = V K = 347V 7 Option (See Accessories Section for specifications) 00 = No options 0P = Natatorium (pool) use (includes acrylic lens) V0 = Cutoff visor (5 shielding) VP = Cutoff visor (5 shielding) for natatorium (pool) w/ lens 0 = lared cutoff visor (horizontal shielding) P = lared cutoff visor (horizontal shielding) natatorium w/ lens XX = or modification not listed; include detailed description. Consult factory prior to specification 8 Destination Requirement 0 = U listed or CSA certified for U.S. = U listed or CSA certified for Canada 9 Color Temperature 27 = 2700K, 80+ CRI 30 = 3000K, 80+ CRI 35 = 3500K, 80+ CRI 40 = 4000K, 80+ CRI 4 = 4000K, 70+ CRI Note: Additional CCT and CRI options are available; consult factory. 10 Diing* 00 = Non-diing ZX = 0-10V analog diing V or 347V input, diing range 100%-5%, 0-10V controls by others = eldod SOOdrive V input, 0-10V analog diing 100%-0.1% power (controls by others) D = eldod SOOdrive V input, diing range 100%-0.1%, DAI controls by others *Diing range refers to % power input, % light output will vary. Refer to Driver Information document MA-1303 Required Mounting Hangers Required mounting hangers for pendant mount fixtures are ordered and priced separately. See installation sheets on website. VPQ required for pendant mounting options 1 or 2: VPQ = Uplight pendant 2" x 4" aluminum stem 0 = U.S. = Canada 0 = No option P = Natatorium (pool) = Surface conduit feed Q = Natatorium (pool) and surface conduit feed C = Canopy (leveling plate ±5 ) S = Canopy with pivot up to 30 ength in inches (36" min. up to 120" max.) 99 = Custom finish VPQ1 1 = One-way 2 = Two-way VPQ2 Note: Suitable structure required to support up to 150 lb/56 kg. or additional pendant specifications, see. DO ighting acts label for S434, ma, 4000K/80+CRI shown. elliptipar from The ighting Quotient 114 Boston Post Road, West Haven, Connecticut 06516, USA Voice ax Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change without notice. Copyright 2018 Sylvan R. Shemitz Designs, C, all rights reserved.