SETTING INDUSTRY STANDARDS SINCE Leading Innovator of Advanced Seating & Restraint Systems. Emergency Vehicle Seating

Transcription

1 SETTING INDUSTRY STANDARDS SINCE 1993 Leading Innovator of Advanced Seating & Restraint Systems Emergency Vehicle Seating ISO 9001: 2008

2 Emergency Vehicle Seating Setting the Standard of Quality and Safety Each EVS seat meets or exceeds the following standards: FMVSS 207 FMVSS 210 FMVSS 213 Child Seat FMVSS 208 for secondary seats in vehicles less than 10,000 GVW. Seamless to comply with Triple-K and OSHA standards for the removal of blood-borne pathogens. GSA specified for use in government ambulances. All testing has been done by independent certified facilities. Copies of our test results are available upon request. Seats can be adapted to meet NFPA standards. Mobility Seats Mobility 1 EVS 1769 Attendant Seat with Mobility 1 Tracking Mobility 1 is available with any advanced seating Allows access to equipment and patient while remaining belted into the seat Place in any location to meet the needs of the EMT Up to 48 long track with locking increments every 4 Allows access to equipment and patient while remaining belted into the seat Swivel base may be mounted in three locations to provide several possible floor plan configurations When tilted forward a seat can carry a second patient (300 lb. capacity) with the help of a backboard Seat folds up when not in use to afford more space to maneuver All EVS seats have seamless construction for easy removal of blood-borne pathogens.

3 Advanced Child Seats Regulation: Child seats should only be mounted forward- or rear-facing in the vehicle. Two Seats in One! EVS 1900 Executive Captain s Chair Ultimate in Luxury Built for premium comfort Flexibility of design Perfect for long distance transports Extra lumbar support Seamless seat shown with swivel base Sewn version EVS1880/ Hi-Bac Child Safety Seat for uninjured children between pounds A streamline ABS seat back that provides durability Molded foam back with lumbar support providing maximum comfort Available with 3, 4, 5 or 6-point belting systems Shown with a 2-point belt system EVS1790 A tilt forward seat engineered to transport a second patient Available with 3, V4, 5-point, HMR or 6-point Body Centering belting systems A non-skid back surface When tilted forward one seat can handle 300 pounds Seat has a quick and easy-to-use tilt forward latch Position 1 upright Also available as a reclining chair EVS 1900R Position 2 folded for backboard shown on Mobility 1 track All EVS belt systems (2, 3, V4, 5 or 6-point) may be used with this seat.

4 Attendant Flip-Up Seats Shown flipped up with 6 point belting Available with all belting systems Shown with swivel base Shown with V4 belting EVS1760/ 1760-V4 Ergonomically-correct 3-point, V4, or 6-point seat back with lumbar support Flip up seat bottom allows for more space Seamless constructive for easy removal of blood borne pathogens Streamline ABS seat back provides durability Can be mounted on SB186 or CBPED base 3-point belting meets FMVSS (USA) and M-1 testing (Europe) EVS1769 A tilt forward seat engineered to transport a second patient with ABS with skid-proofing Flip up seat bottom allows for more space Seamless construction Base can be mounted in three locations When tilted forward one seat can handle up to 300 pounds Attendant Seats EVS17803E/17803ET Seamless construction for removal of blood-borne pathogens Light-weight construction Made to fit in confined spaces such as Type II and Sprinter units Super-thin profile for tight spaces (see inset photo) Available without or with (1780ET) slide track EVS1780 Ergonomically-correct seat back with lumbar support Available with 3, 5, V4, 6-point, HMR or 6-point Body Centering belting Seamless construction for easy removal of blood-borne pathogens Streamline ABS seat back that provides durability Built-in Lumbar Support! Super-thin profile for tight spaces EVS1780 SPECIFICATIONS Overall seat height (on base) 40 - Seat height with track; 26 - Seat depth (from edge to wall) 18 - Seat width Also available with a reclining seat option Shown with swivel base (not to be used with a child seat.)

5 Child/Attendant Flip-up Seat EVS1860 EVS1505 EVS1500 Series Child Safety Seat for uninjured children between pounds Flip up seat bottom allows for more space Seamless constructive for easy removal of blood borne pathogens. Streamline ABS seat back provides durability. EVS1500 A 3-piece seamless cushion set Available with 3-point (1503), V4, 5-point (1505) or 6-point (1506) Seats may be used in lieu of a squad bench or in the CPR location 3-point belting meets FMVSS (USA) and M-1 testing (Europe) Standard Seats All seats are available with a 6 or 12 degree back. Sewn version Seamless Seamless. Shown with a standard cabinet base Sewn version EVS1800/1850 Child Safety Seat for uninjured children between pounds Molded foam back with lumbar providing maximum comfort Easy. Convenient. Simply pull the seat cushion forward and the child restraint is ready for use. No add-ons. No assembly. No set-up. No access or storage problems. EVS1750/17407 Molded foam back with lumbar support with maximum comfort Industrial-strength, double locking slide track and release bar Belt attached to track EVS1850/1852 SPECIFICATIONS 48 Overall seat height (on base) 28 Seat depth (from edge to wall) - EVS Seat depth (from edge to wall) - EVS Seat width EVS1750/1752 SPECIFICATIONS 48 Overall seat height (on base) 38 Seat height with track 28 Seat depth (from edge to wall) - EVS Seat depth (from edge to wall) - EVS Seat width

6 Accessories & Rep Bases Patented Design Cabinet Base Available for use with all EVS seats May be mounted forward or rear-facing Converts to lock box to secure drugs SB 186-8S/186-8 Base Lightweight base; meets or exceeds FMVSS, including M1(UK) standards Used with 1760 seat only Made to fit in confined spaces with 8 positions Seat can be mounted to base on left, right or center sides 186-8S Short version of base EVS Ltd. is a three-time WINNER of the EMSWorld CBH Heater Base Tall heater base For use with EVS standard seats only SB175 Base For use with 1750 seat only 9" tall base Two positions 3-1/2 height SB 186-8WWM Base Used with 1760 seat only 8 positions Made to fit in confined spaces Seat can be mounted to base on left, right or center sides Inovation Awards Visit EVSLtd.com for more information. CBWD Locking Cabinet Base SB-8S Mini Base SB-2 or SB-8 For use with Standard and Advanced EVS seating Available without lock or with lock to secure drugs 3.5" tall base with 8-position locking Use with 1780/1790 Ideal for wheel well areas SB-2: Two-position base for child seats SB-8: Eight-position base for non-child seats Patented design for maximum strength Conveniently-located release handle for easy positioning Emergency Vehicle Seating CBPED / CBPEDR Base To be used exclusively with the 1780, 1780E and 1880 seats Compact base for confined spaces CBPED (without track) CBPEDR (with track) CBPED 1760/1860 Base Used with 1760/1860 attendant seats Seat may be mounted to base on left, right or center sides. All EVS products are suitable for OEM, Remount or Aftermarket.

7 lacement Products Belts Belt colors available upon request All belts may be purchased for use in the squad bench area. * Belt also available with sensor function ** NFPA compliant with sensors Cobalt Vinyl Colors Gunmetal Ash 2 pt. Belt 3 pt. Belt ** Sage Wedgewood Royal 4 pt. Belt ** 5 pt. Belt * Desert Rose Additional custom and contract colors are available We purchase from all major vinyl manufacturers If a custom color is desired, we can work with all ambulance manufacturers to meet your color needs Though the color swatches shown on this printed piece are very close to the actual vinyl colors, they are not intended to be used as an exact color match. 6 pt. Belt ** V4 Belt * ** Custom Cushions & Headers Vinyl colors available to match all seating products call for more details Arms Vac Form Arm Molded Arm 1900 Arm

8 Our Products have no seams... therefore, No Migration. What does this mean? Two government agencies, OSHA and GSA have set guidelines for the migration of blood-borne pathogens to EMS personnel and the people they serve. This guideline recommends the use of seamless construction wherever the ambulance attendant comes in contact with the seating product when in use, therefore minimizing the migration of dangerous pathogens. Vinyl Color Coordinates Seamless seats and cushions require a special heavy-duty vinyl. We can assist you to coordinate the color of your seating vinyl with an upholstery-grade vinyl. This upholstery-grade vinyl is available in cut yardage and is ideal for covering door panels and cabinet trim. Made with pride in the USA. Specifications Cleanability Width Roll Length Weight Cold Crack Flammability Durability Antimicrobial Disinfectability 54 minimum medi+vac - 20/25 yards Companion II - 30/35 yards medi+vac - 60 oz. Companion II - 32 oz. -20 F (-29 C) California Fire Regulation (Bulletin 117, Sec) Automotive (FMVSS-302) BIFMA (Screen Test, Sec ) Boston Fire Code (BFD IX-1) CID A-A-2950-A Port Authority of NY and NJ Medi+VAC and Companion II with advanced medi+gard exceeds the industry accepted Wyzenbeek test standard for abrasion. Each vinyl with advanced medi+gard provides outstanding protection in difficult emergency vehicle environments. Both vinyls with advanced medi+gard have been formulated to achieve a superior level of disinfectability using products containing sodium hypochlorite (common household bleach) diluted 1:10. Cleaning is made easy with E.V.S., Ltd s selection of vinyls and their advanced medi+gard protective finish. While staining and soiling from bodily fluids are common in the harsh environment of ambulances, the manufacturer s sulfide stain-resistant formulation allows most to be removed using the following method: Step 1: Step 2: Step 3: Light Soiling Clean with warm water and liquid cleaner such as Formula 409 Cleaner and Degreaser or an equivalent cleaner with a sponge or soft cloth. Heavy Soiling. Clean with a soft white cloth dampened with lighter fluid (naphtha). Rub gently and rinse with a waterdampened cloth. Bodily Fluid Stains. Clean with a soft white cloth with a solution of household bleach (sodium hypochlorite); 10% bleach, and 90% water. Rub gently then rinse with a water-dampened cloth to remove bleach concentrate. ISO 9001:2008 USA 3702 West Sample Street South Bend, Indiana Local and International: OEM and Aftermarket: Fax: evssales@evsltd.com EVS EUROPE LTD. Unit 1, Chilford Court, Rayne Road Braintree, Essex CM7 2QS, England Tel: 44 (0) Fax: 44 (0) enquiries@evseurope.com 400_12-15