GLOBAL TWIN SERIES UL 489 LISTED MOLDED CASE CIRCUIT BREAKERS EARTH LEAKAGE CIRCUIT BREAKERS. 50A Frame ~ 800A Frame Max Voltage 600V USEH240C

Transcription

1 GOBA TWIN SERIES U 89 ISTED MODED ASE IRUIT BREAKERS EARTH EAKAGE IRUIT BREAKERS A Frame ~ 800A Frame Max Voltage 00V USEH0

2 The new FUJI U89 Molded ase ircuit Breaker and Earth eakage ircuit Breaker (GOBA TWIN series) provide the ultimate in compact design, unprecedented value, and use anywhere in the world. A Frame 5A Frame A Frame 00A Frame MORE OMPAT (especially /0A Frame, 5A Frame, A Frame) than any breaker on the market, so control panels take up less space than ever before. ompetitive pricing. onformity to all WORDWIDE STANDARDS, including U / SA / IE / E Marking / JIS (Japan) / (hina). S Fuji s GOBA TWIN series gives you the features and flexibility you need: ) Suitable for branch circuit protection. ) Rated current of 800A, Max 00V. ) Standard type and High interrupting capacities are available in identically sized breakers. ) Shunt trip (F), Under voltage release (R) and other accessories are available. 5) Screw, Flat, or ug terminal are available. ) Auxiliary switch, Alarm switch, and Shunt trip can be installed in the field. 7) hoose BreakerMounted (N type) or Panel DoorMounted (V type), FlangeMounted (F type), operating handles.

3 Table of ontents Page Specifications for MB Specifications for EB Part Number Structure haracteristic urves Dimensions Internal Accessories External Accessories Dimensions of Operating Handles Wiring, Wire Sizes and Tightening Torque Flange Disconnect Handle Discontinued Products ross hart Terms & onditions

4 Molded ase ircuit Breakers New GTwin, U89 isted BW Series Frame size (A) Type Appearance (with Screw Terminals, ) BWRAGUP BWRAGUP 0 BW0EAGUP BW0EAGUP SSR=U89 interrupting capacity Rated insulation voltage (V) (IE097) Rated voltage (V) (U89) Rated current (A) Poles Rated frequency (Hz) Rated interrupting capacity sym (ka) Dimension inch (mm) Terminal construction Internal accessories * External accessories A 90 D A 0,5,5,0,0,,0, /0 U89 AN/SA. No.5 A 00V/ 00V/Y 80V/ 80V/Y 0V D V IE097 JIS 80 lcu/ics A 90V 00V 0V 0V 5/ 7.5/ /5 00V /5 0V 5/ D V 5/ GB08. A 00V 7/ /5 Icu/Ics 0V /7 5/ a d c a.99() b.7() b c.(0) d.07(8) Screw terminals Flat terminals ug terminals Auxiliary switch Auxiliary switch for low current Alarm switch Alarm switch for low current Auxiliary & Alarm switch Aux and Alarm for low current Shunt trip Under voltage trip Accessories with terminal block Padlocking device (ap type) Handle locking cover External operating handle None SF SB W WD K KD WK WDKD F R A Q V BZWRU BZWDRU BZKRU BZKDRU BZWKRU BZWDKDRU BZF*U BZR*AU * BZA BZ BZVD N BZND Field Installable terminal Kit Terminal covers * Flat terminal kit ug terminal kit for screw, short type for screw, long type BZSU0B Provided BW9BTAAW for Flat terminal for ug terminal Insulation barrier * Mass: lb. (kg) (screw terminals) BZB 0.88(0.) 90 0,5,5,0,0,,0, /0 5/ 7.5/ /5 /5 5/ 5/ 7/ /5 /7 5/.95(75).7().(0).07(8) BZW*U BZWD*U BZK*U BZKD*U BZWK*U BZWDKD*U BZF*U BZR*U * BZA BZ BZVD BZND BZSU0B Provided BW9BTAAW BZB.(0.5) ,,70,75,80,90,0 /0 5/ 7.5/ /5 /5 5/ 5/ /5 5/.99().7().(0).07(8) BZWRU BZWDRU BZKRU BZKDRU BZWKRU BZWDKDRU BZF*U BZR*AU * BZA BZ BZVD BZND BZSU5B Provided BW9BTAAW BZB 0.88(0.) /0 5/ 7.5/ /5 /5 5/ 5/ /5 5/.95(75).7().(0).07(8) BZW*U BZWD*U BZK*U BZKD*U BZWK*U BZWDKD*U BZF*U BZR*U * BZA BZ BZVD BZND BZSU5B Provided BW9BTAAW BZB.(0.5) * For internal accessories with terminal block, specify "A" in the accessory P/N. When A Frame & 0A Frame are ordered w/uvt, the UVT is supplied with terminal block as standard. * Insulation barriers are only required with flat terminal. * Short terminal covers are supplied as standard. If long terminal covers are required, please order BW9BTAAW or BW9BTAAW. * These internal accessories can be installed in the field. (see page 0 for part number) : Available, : Not available 90 0

5 Molded ase ircuit Breakers New GTwin, U89 isted BW Series Frame size (A) 5 Type BW5JAGU BW5RAGU BWEAGU BWJAGU BWRAGU Appearance (with Screw Terminals, ) SSR=U89 interrupting capacity Rated insulation voltage (V) (IE097) Rated voltage (V) (U89) Rated current (A) Poles Rated frequency (Hz) Rated interrupting capacity sym (ka) Dimension inch (mm) Terminal construction Internal accessories External accessories A D A 90 00Y/ Y/ Y/ Y/7 5,0,0,0,,0,70,75,80,90,0,5 5,,0,75,00,5, /0 /0 U89 AN/SA. No.5 A 00V/ 00V/Y 80V/ 80V/Y V 0 D V IE097 JIS 80 lcu/ics A 90V 0V 0V 00V 5/8 0/5 0/5 5/ /8 /5 /5 80V 0/5 /5 0V /5 0/ D V 5/8 0/0 GB08. Icu/Ics A 00V 0V 0/5 /5 /5 0/ a d c a.(0).5(90).5(90) b.7(7).7(7) b c.77(8).77(8) d.70(95).70(95) Screw terminals (standard) Flat terminals ug terminals Auxiliary switch Auxiliary switch for low current Alarm switch Alarm switch for low current Auxiliary & Alarm switch Aux & Alarm for low current Shunt trip None SF SB W K 8 WK 8 F BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 Under voltage trip R BW9RGA* BW9RGA* Accessories with terminal block Padlocking device A Q See page BW9QA See page BW9QA Q BW9QA BW9QA External operating handle V BW9V0A BW9V0A N BW9N0A BW9N0A F BW9F0A BW9F0A Field Installable terminal kit Terminal covers Flat terminal kit ug terminal kit Short type,graywhite BZSB5 GOBA BW9S0A GOBA Provided Provided * Short type,transparent BW9BTAS BW9BTAS BW9BTAS ong type,graywhite BW9BTAW BW9BTAW BW9BTAW ong type,transparent BW9BTA BW9BTA BW9BTA /0 /0 0 0 /5 8/9 8/9 0/5 8/9 0/5 8/9 0/5 /8 /5 /5 0/ 8/9 0/5 /8 /5.(5).(5) 7.(8) 7.(8).77(8).77(8).70(95).70(95) BW9WSG0(R) BW9WSG0(R) BW9WDG0(R) BW9WDG0(R) BW9KSG0(R) BW9KSG0(R) BW9KDG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9WKDG0(R) BW9F*G0 BW9F*G0 BW9RGA* BW9RGA* See page See page BW9QA BW9QA BW9QGA BW9QGA BW9V0GA BW9V0GA BW9N0GA BW9N0GA BW9F0GA BW9F0GA BW9SS0A GOBA Please see page 8. Provided Provided BW9BTGAS BW9BTGAS BW9BTGAW BW9BTGAW BW9BTGA BW9BTGA / / /8 /5 /5 /5 0/ 0/0 /5 0/.(5) 7.(8).77(8).70(95) BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 BW9RGA* See page BW9QA BW9QGA BW9V0GA BW9N0GA BW9F0GA Provided BW9BTGAS BW9BTGAW BW9BTGA Insulation barrier BW9BPA BW9BPA BW9BPGA BW9BPGA BW9BPGA Mass: lb. (kg) (screw terminals).7(0.8).5(.).0(.0).5(.).09(.).5(.).09(.).5(.).09(.).5(.) * Short type terminal covers (graywhite) are supplied as standard. : Available, : Not available

6 Molded ase ircuit Breakers New GTwin, U89 isted BW Series Frame size (A) 00 Type BW00EAGU BW00SAGU BW00RAGU BW00HAGU Appearance (with Flat Terminals, ) SSR=U89 interrupting capacity Rated insulation voltage (V) (IE097) Rated voltage (V) (U89) Rated current (A) Poles Rated frequency (Hz) Rated interrupting capacity sym (ka) Dimension inch (mm) Terminal construction Internal accessories External accessories U89 AN/SA. No.5 IE097 JIS 80 lcu/ics GB08. Icu/Ics Screw terminals Flat terminals (standard) ug terminals Auxiliary switch Auxiliary switch contacts Aux. low current Aux. low current contacts Alarm switch Alarm switch contacts Alarm low current Alarm low current contacts Shunt trip Under voltage trip Accessories with terminal block Padlocking device External operating handle Field Installable terminal Terminal covers Short type, graywhite * Short type, transparent ong type, graywhite ong type, transparent Insulation barrier A D A Mass: lb. (kg) (screw terminals) * Terminal covers are NOT supplied as standard. a b D A d c A D A 00V/ 00V/Y 80V/ 80V/Y 0V V 90V 0V 0V 00V 80V 0V V 00V 0V a b c d None SB W V K J 8 9 F R A QN Q V N F , 00,, 00 /0 8/9 0/5 0/5 0/5 /5 0/ 0/5 /5 5.5(0).(57).055() 5.78() BW9WSHA BW9WSHA BW9WDHA BW9WDHA BW9KSHA BW9KSHA BW9KDHA BW9KDHA BW9FHA* BW9RHA* See page BW9QNHA BW9QHA BW9V0HA BW9N0HA BW9F0HA BW9BTHASW BW9BTHAS BW9BTHAW BW9BTHA BA.(.).5(5.) /0 5 5 /5 0/ /8 /8 /8 85/ 0/ /8 85/ 5.5(0).(57).055() 5.78() BW9WSHA BW9WSHA BW9WDHA BW9WDHA BW9KSHA BW9KSHA BW9KDHA BW9KDHA BW9FHA* BW9RHA* See page BW9QNHA BW9QHA BW9V0HA BW9N0HA BW9F0HA BW9BTHASW BW9BTHAS BW9BTHAW BW9BTHA BA /0 0 5/8 /8 /5 /5 /5 0/ 0/0 /5 0/ 5.5(0).(57).055() 5.78() BW9WSHA BW9WSHA BW9WDHA BW9WDHA BW9KSHA BW9KSHA BW9KDHA BW9KDHA BW9FHA* BW9RHA* See page BW9QNHA BW9QHA BW9V0HA BW9N0HA BW9F0HA BW9BTHASW BW9BTHAS BW9BTHAW BW9BTHA BA / (: with lug terminals) 5 (: with lug terminals) 5 5/8 / 70/5 70/5 70/5 5/ 0/0 70/5 5/ 5.5(0).(57).055() 5.78() BW9WSHA BW9WSHA BW9WDHA BW9WDHA BW9KSHA BW9KSHA BW9KDHA BW9KDHA BW9FHA* BW9RHA* See page BW9QNHA BW9QHA BW9V0HA BW9N0HA BW9F0HA BW9BTHASW BW9BTHAS BW9BTHAW BW9BTHA BA.(.).5(5.).(.).5(5.).(.).5(5.) : Available, : Not available 5

7 Molded ase ircuit Breakers New GTwin, U89 isted BW Series Frame size (A) Type BW0RAGU BW0HAGU BW800RAGU BW800HAGU Appearance (with Flat Terminals, ) SSR=U89 interrupting capacity Rated insulation voltage (V) (IE097) A D Rated voltage (V) (U89) A Rated current (A) 0, 00, 0 700, 800 Poles Rated frequency (Hz) /0 /0 /0 /0 Rated interrupting capacity sym (ka) U89 AN/SA. No.5 A 00V/ 00V/Y 80V/ 80V/Y (: with lug terminals) 5 (: with lug terminals) (: with lug terminals) 5 (: with lug terminals) 0V D V IE097 JIS 80 lcu/ics A 90V 0V 0V 5/8 /8 /5 5/8 / 70/5 5/8 /8 /5 5/8 / 70/5 00V /5 70/5 /5 70/5 80V /5 70/5 /5 70/5 0V 0/ 5/ 0/ 5/ D V 0/0 0/0 0/0 0/0 GB08. Icu/Ics A 00V 0V /5 0/ 70/5 5/ /5 0/ 70/5 5/ Dimension inch (mm) a b d c a b c 8.8().8(75).055() 8.8().8(75).055() 8.8().8(75).055() 8.8().8(75).055() d 5.78() 5.78() 5.78() 5.78() Terminal construction Internal accessories Screw terminals Flat terminals ug terminals Auxiliary switch Auxiliary switch contacts None SB W V * BW9WSHA BW9WSHA * BW9WSHA BW9WSHA * BW9WSHA BW9WSHA * BW9WSHA BW9WSHA Aux. low current BW9WDHA BW9WDHA BW9WDHA BW9WDHA Aux. low current contacts BW9WDHA BW9WDHA BW9WDHA BW9WDHA Alarm switch K BW9KSHA BW9KSHA BW9KSHA BW9KSHA Alarm switch contacts J BW9KSHA BW9KSHA BW9KSHA BW9KSHA Alarm low current 8 BW9KDHA BW9KDHA BW9KDHA BW9KDHA Alarm low current contacts 9 BW9KDHA BW9KDHA BW9KDHA BW9KDHA Shunt trip F BW9FHA* BW9FHA* BW9FHA* BW9FHA* Under voltage trip R BW9RHA* BW9RHA* BW9RHA* BW9RHA* Accessories with terminal block A See page See page See page See page External accessories Padlocking device QN Q BW9QNHA BW9QJA BW9QNHA BW9QJA BW9QNHA BW9QJA BW9QNHA BW9QJA External operating handle V BW9V0JA BW9V0JA BW9V0JA BW9V0JA N BW9N0JA BW9N0JA BW9N0JA BW9N0JA Field Installable terminal Terminal covers Short type, graywhite * Short type, transparent ong type, graywhite BW9BTJAW BW9BTJAW BW9BTJAW BW9BTJAW ong type, transparent BW9BTJA BW9BTJA BW9BTJA BW9BTJA Insulation barrier BA BA BA BA Mass: lb. (kg) (screw terminals) 9.(8.9) 9.(8.9) 0.7(9.) 0.7(9.) * ug terminal is NOT available for 0 ampere. * Flat terminal is NOT available for 800 ampere. * Terminal covers are NOT supplied as standard. : Available, : Not available

8 Earth eakage ircuit Breakers New GTwin, U89 isted EW Series Frame size (A) 0 Type EWRAGUP EW0EAGUP EW0EAGUP Appearance (with Screw Terminals, ) SSR=U89 interrupting capacity Rated voltage A (V) U IE Rated current (A), 5,, 5, 0, 0,, 0, 0,, 70, 75, 80, 90, 0 Rated Sensitive urrent (ma) 0,, 0/00/0 0, 0/00 0,, 0/00/0 Poles Rated frequency (Hz) /0 /0 /0 Rated interrupting capacity sym (ka) U89 AN/SA. No.5 IE097 JIS 80 lcu/ics A A 80V/ 80V/Y 0V 0V 5V 80V /5 /5 /5 /5 /5 /5 0V 5/ /5 5/ 0V 5/ /5 5/ GB08. Icu/Ics A 00V 0V /5 5/ 7.5/ /5 /5 5/ Dimension inch (mm) a b d c a b c.95(75).7().(0).95(75).7().(0).95(75).7().(0) d.07(8).07(8).07(8) Terminal construction Screw terminals Flat terminals ug terminals None SF SB Internal accessories * Auxiliary switch Alarm switch Shunt trip W K F BZW*U BZK*U BZF*AU BZW*U BZK*U BZF*AU BZW*U BZK*U BZF*AU Under voltage trip R BZR*AU BZR*AU BZR*AU Accessories with terminal block A * * * External accessories Padlocking device (ap type) Handle locking cover Q BZA BZ BZA BZ BZA BZ External operating handle V BZVD BZVD BZVD N BZND BZND BZND Field Installable terminal kit Terminal covers * Flat terminal kit ug terminal kit for screw, short type BUSU0B Provided BUSU5B Provided BUSU5B Provided for screw, long type BW9BTAAW BW9BTAAW BW9BTAAW for flat terminal for ug terminal Insulation barrier * Mass: lb. (kg) (screw terminals) BZB.(0.) BZB.(0.) BZB.(0.) * For Internal accessories with terminal block, specify A in the accessory P/N. When A Frame & 0A Frame are ordered w/uvt, the UVT is supplied with terminal block as standard. * Insulation barriers are only required with flat terminal. * Short terminal covers are supplied as standard. If long terminal covers are required, please order BZTBU or BZTBU. * These internal accessories can be installed in the field. (see page 0 for part number) : Available, : Not available 7

9 Earth eakage ircuit Breakers New GTwin, U89 isted EW Series Frame size (A) 5 Type EW5JAGU EW5RAGU EWJAGU EWRAGU Appearance (with Screw Terminals, ) SSR=U89 interrupting capacity Rated voltage A (V) U IE Rated current (A) 5,0,0,0,,0,75,0,5 Instantaneous Rated Sensitive urrent (ma) B 0 0 trip type Tripping time (s) 0. or less 0. or less Instantaneous Rated Sensitive urrent (ma) K 0/00/0/00 0/00/0/00 /timedelay Tripping time (s) 0./0.// 0./0.// trip type Inertia nontripping time (s) 0/0./0.5/ 0/0./0.5/ Poles Rated frequency (Hz) /0 /0 Rated interrupting U89 AN/SA. A 80V/ 80V/Y 0 0 capacity No.5 sym (ka) IE097 JIS 80 lcu/ics A 0V 0V 5V 80V 0V 0/5 0/5 0/5 /5 0 /5 /5 /5 0/ 0V /5 0/ GB08. Icu/Ics A 00V 0V 0/5 /5 /5 0/ Dimension a d a.5(90).5(90) inch (mm) c b.7(7).7(7) b c.77(8).77(8) d.70(95).70(95) Terminal construction Internal accessories External accessories Screw terminals Flat terminals ug terminals Auxiliary switch Auxiliary switch for low current Alarm switch Alarm switch for low current Auxiliary & Alarm switch Aux. & Alarm for low current Shunt trip Under voltage trip Earth alarm switch * Accessories with terminal block Padlocking device None SF SB W K 8 WK 8 F R A Q Q BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 BW9RGA* BW9SG0 See page BW9QA BW9QA BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 BW9RGA* BW9SG0 See page BW9QA BW9QA External operating handle V BW9V0A BW9V0A N BW9N0A BW9N0A F BW9F0A BW9F0A Field Installable terminal kit Terminal covers * Flat terminal kit ug terminal kit Short type, graywhite Short type, transparent BW9SS0A GOBA BW9S0A GOBA Provided BW9BTAS Provided BW9BTAS ong type, graywhite BW9BTAW BW9BTAW ong type, transparent BW9BTA BW9BTA Insulation barrier Mass: lb. (kg) (screw terminals) BW9BPA.5(.) BW9BPA.5(.) ,,0,75,00,5, or less 0. or less 0/00/0/00 0/00/0/00 0./0.// 0./0.// 0/0./0.5/ 0/0./0.5/ /0 / /5 /5 0/5 /5 0/5 /5 /5 0/ /5 0/ 0/5 /5 /5 0/.(5).(5) 7.(8) 7.(8).77(8).77(8).70(95).70(95) BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 BW9RGA* BW9SG0 See page BW9QA BW9QGA BW9V0GA BW9N0GA BW9F0GA BZSB5 GOBA Please see page 8. Provided BW9BTGAS BW9BTGAW BW9BTGA BW9BPGA.5(.) BW9WSG0(R) BW9WDG0(R) BW9KSG0(R) BW9KDG0(R) BW9WKSG0(R) BW9WKDG0(R) BW9F*G0 BW9RGA* BW9SG0 See page BWQA BW9QGA BW9V0GA BW9N0GA BW9F0GA Provided BW9BTGAS BW9BTGAW BW9BTGA BW9BPGA.5(.) * Short type terminal covers (graywhite) are supplied as standard. * Rightside mount only. : Available, : Not available 8

10 Earth eakage ircuit Breakers New GTwin, U89 isted EW Series Frame size (A) 00 0 Type EW00SAGU EW00RAGU EW00HAGU EW0RAGU Appearance (with Flat Terminals, ) SSR=U89 interrupting capacity Rated voltage A (V) U IE Rated current (A), 00,, 00 0, 00, 0 Instantaneous trip type Rated Sensitive urrent (ma) Tripping time (s) B 0 0. or less 0 0. or less 0 0. or less Instantaneous /timedelay trip type Rated Sensitive urrent (ma) Tripping time (s) Inertia nontripping time (s) K 0/00/0/00 0./0.// 0/0./0.5/ 0/00/0/00 0./0.// 0/0./0.5/ 0/00/0/00 0./0.// 0/0./0.5/ 0/00/0/00 0./0.// 0/0./0.5/ Poles Rated frequency (Hz) /0 /0 /0 /0 Rated interrupting capacity sym (ka) U89 AN/SA. No.5 IE097 JIS 80 lcu/ics A A 80V/ 80V/Y 0V 0V 5V 80V 5 5 /8 /8 /8 0 /5 /5 /5 5 (: with lug terminals) 5 (: with lug terminals) 5 70/5 70/5 70/5 0 /5 /5 /5 0V 85/ 0/ 5/ 0/ 0V 85/ 0/ 5/ 0/ GB08. Icu/Ics A 00V 0V /8 85/ /5 0/ 70/5 5/ /5 0/ Dimension inch (mm) a b d c a b c d 5.5(0).(57).055() 5.78() 5.5(0).(57).055() 5.78() 5.5(0).(57).055() 5.78() 8.8().8(75).055() 5.78() Terminal construction Internal accessories Screw terminals Flat terminals ug terminals Auxiliary switch Auxiliary switch, contacts None SB W V BW9WSHA BW9WSHA BW9WSHA BW9WSHA BW9WSHA BW9WSHA * BW9WSHA BW9WSHA Aux. low current BW9WDHA BW9WDHA BW9WDHA BW9WDHA Aux. low current, contacts BW9WDHA BW9WDHA BW9WDHA BW9WDHA Alarm switch K BW9KSHA BW9KSHA BW9KSHA BW9KSHA Alarm switch, contacts J BW9KSHA BW9KSHA BW9KSHA BW9KSHA Alarm low current 8 BW9KDHA BW9KDHA BW9KDHA BW9KDHA Alarm low current, contacts 9 BW9KDHA BW9KDHA BW9KDHA BW9KDHA Shunt trip F BW9FHA* BW9FHA* BW9FHA* BW9FHA* Under voltage trip R BW9RHA* BW9RHA* BW9RHA* BW9RHA* Earth alarm switch Accessories with terminal block A See page See page See page See page External accessories Padlocking device QN Q BW9QNHA BW9QHA BW9QNHA BW9QHA BW9QNHA BW9QHA BW9QNHA BW9QHA V BW9V0HA BW9V0HA BW9V0HA BW9VJA External operating handle N BW9N0HA BW9N0HA BW9N0HA BW9N0JA F BW9F0HA BW9F0HA BW9F0HA Field Installable terminal Terminal covers * Short type, graywhite Short type, transparent BW9BTHASW BW9BTHAS BW9BTHASW BW9BTHAS BW9BTHASW BW9BTHAS ong type, graywhite BW9BTHAW BW9BTHAW BW9BTHAW BW9BTHAW ong type, transparent BW9BTHA BW9BTHA BW9BTHA BW9BTHA Insulation barrier BA BA BA BA Mass: lb. (kg) (screw terminals).5(5.).5(5.).5(5.) * ug Terminal is NOT available for 0 ampere. * Terminal covers are NOT supplied as standard. : Available, : Not available 9

11 Part Number Structure GTWIN; MB ( 800AF) BWEAGU Product category Number of poles Rated current (A) Terminal structure ode ine side oad side None None SB SF Screw Flat ug Flat Screw Flat ug Flat GTWIN; EB ( 0AF) EWRAGU Product category Number of poles Rated current (A) Rated sensitive current (ma) P 0 SF BW0EAGU, BW5RAGU, BW5RAGU BWEAGU, BW5JAGU, BWRAGU P 0 ode ine side B D K K 0mA ma* 0/00mA** changeable 0/00/0* or 0/00/0/00mA changeable *Only for EWRAGUP, EW0EAGUP **Only for EW0EAGUP Terminal structure ode ine oad side side None Screw Screw None Flat Flat SB ug ug SF Flat Flat BWRAGU * ug terminal is Not available for BW0AGUP0 (Rated current 0 ampere in BW0). EWRAGU EW0EAGU K EW5JAGU, EW5RAGU EW5JAGU, EWRAGU * ug terminal is Not available for EW0RAGUP0 (Rated current 0 ampere in EW0). SF BW00EAGU, BW00SAGU, BW00RAGU, BW00HAGU BW0RAGU, BW0HAGU, BW800RAGU, BW800HAGU EW00SAGU, EW00RAGU, EW00HAGU EW0RAGU

12 haracteristic urves BWRAGU, EWRAGU (Rated current: 5A, A, A, 0A) BWRAGU, EWRAGU (Rated current: A, 5A, 0A, 0A, A) Seconds Minutes Max. value Min. value Instantaneous tripping 90% to 0% Instantaneous tripping 800% to 0% orrection ratio (%) Reference temp Multiple of rated current Ambient temp. ( ) Multiple of rated current Seconds Minutes Max. value Min. value orrection ratio (%) Reference temp Ambient temp. ( ) BW0EAGU, EW0EAGU (Rated current: 0A, A, 75A, 80A, 90A) BW0EAGU, EW0EAGU (Rated current: 0A) Seconds Minutes Max. value Min. value Instantaneous tripping 90% to 0% Multiple of rated current orrection ratio (%) Reference temp Ambient temp. ( ) Seconds Minutes Max. value Min. value Instantaneous tripping 800% to 0% Multiple of rated current orrection ratio (%) Reference temp Ambient temp. ( ) BW5, EW5 (Rated current: 5A) BW5, EW5 (Rated current: 0A) Minute 0 0 Max. value Minute 0 0 Max. value 0 0 Second Min. value Instantaneous tripping characteristic 0A±0A Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( ) Second Min. value Instantaneous tripping characteristic 0A±0A Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( )

13 haracteristic urves BW5, EW5 (Rated current: 0A) BW5, EW5 (Rated current: 0A) Minute 0 0 Max. value Minute 0 0 Max. value 0 0 Second Min. value Instantaneous tripping characteristic 0A±0A Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( ) Instantaneous tripping 0. characteristic 0.0 0A±0A 0.0 Second Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( ) BW5, EW5 (Rated current: 5A) BW, EW Minute 0 0 Max. value Minute 0 0 Max. value 0 0 Second Min. value Instantaneous tripping characteristic In±0% Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( ) Second Min. value Instantaneous tripping characteristic In±0% Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( ) BW00, EW00 BW0, EW0 Minute Second Min. value Instantaneous tripping characteristic In±0% Max. value Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( ) Minute Second Min. value Instantaneous tripping characteristic In±0% Max. value Max. total fault clearing time Muitiple of rated current Rated current correction ratio (%) 0 Reference temp Ambient temp. ( )

14 haracteristic urves BW800 Minute Second Min. value Instantaneous tripping characteristic 8In±0% Max. value Max. total fault clearing time Muitiple of rated current orrection ratio (%) 0 Reference temp Ambient temp. ( ) Earth leakage tripping (EW, EW0) (s) 0. Rated nontripping current Rated sensitive current(i n) 0mA 0.0 ma 0/00mA 0/00/0mA Ground fault current (Multiple of rated sensitive current %) Earth leakage tripping (EW5, EW, EW00, EW0) Minute Second Instantaneous trip type Inertia nonoperating Inertia nonoperating Inertia nonoperating time time time Rated nontripping current Rated sensitive current (I n) Ground fault current (Multiple of rated sensitive current %) Minute Second Timedelay trip type Max. operating time: 0.s Max. operating time: s Max. operating time: s Rated nontripping current Rated sensitive current (I n) Rated nontripping current Rated sensitive current (I n) Ground fault current (Multiple of rated sensitive current %) Rated nontripping current Rated sensitive current (I n)

15 Dimensions: inch (mm) BWRAGUP, P, BW0EAGUP, P, EWRAGUP, EW0EAGUP*, P pole ( pole)* pole.575 (0).5 () Mounting hole.99 ().95 (75) Terminal cover.99 ().07 (8) Trip button 0.8 (9.8).97 (0) 0.8 (9.8).5 ().575 (0) Mounting hole.99 () Terminal cover 0.95 () 0.98 (5).99 () Trip button.07 (8) 0.8 (9.8).97 (0) 0.8 (9.8) ON 0.07 dia (Ø7.8). (0) 0.57 () 0.5 (8).07 (8).008 (5).9 ().008 (5) (.5) 0. Tap or 0.97 dia hole (M or Ø5) Breaker 0.9 dia (Ø.9).07 (8) 0. Tap or 0.97 dia hole (M or Ø5) Breaker.07 (8) 0.98 (5) 0.9 (7) 0.5 (8) 0.7 (8.) A Frame: M5x 0A Frame: M8x5 *Note: pole breaker is supplied in pole frame with current carrying parts omitted from center pole () BWRAGUP, P(SF), EWRAGUP(SF) pole pole Mounting hole 0.7 (7) Insulation barrier 0. (.5).99 () Mounting hole 0.7 (7) Insulation barrier 0. (.5).99 () 0.07 dia (Ø7.8).8 ().9 () (.5) 0. Tap or 0.97 dia hole (M or Ø5) Breaker 0. Tap or 0.97 dia hole (M or Ø5) Breaker.575 (0).5 ().99 ().07 (8).97 (0).575 (0).5 ().99 ().07 (8).97 (0) ON 0.9 dia (Ø.9).07 (8).07 (8) Trip button Trip button 0.98 (5) 0.5 (.5) M5x 0.5 (.5) M5x.99 ().95 (75) 0.98 (5).99 () 0.5 (8) 0.57 ().008 (5). (0).07 (8) ().0 () BW0EAGUP, P(SF), EW0EAGUP*, P(SF) pole pole (EGU) pole Mounting hole 0.5 (9) Insulation barrier 0.78 (8.5).99 () Mounting hole 0.5 (9) Insulation barrier 0.78 (8.5).99 () 0.07 dia (Ø7.8).8 ().9 () (.5) 0. Tap or 0.97 dia hole (M or Ø5) Breaker 0. Tap or 0.97 dia hole (M or Ø5) Breaker.575 (0).5 ().99 ().07 (8).97 (0).575 (0).5 ().99 ().07 (8).97 (0) ON 0.9 dia (Ø.9).07 (8).07 (8) Trip button Trip button 0.98 (5) (8) M8x (8) M8x.99 (). (0).95 (75) 0.98 (5).78 (5).99 () 0.5 (8) 0.57 () 0.57 (). (8).008 (5). (0).07 (8) *Note: pole breaker is supplied in pole frame with current carrying parts omitted from center pole.

16 Dimensions: inch (mm) BW5*UP, P pole pole (pole)* Panel drilling.99 () 0.5 (8) Insulation barrier Detachable Mounting hole.99 () 0.5 (8) Insulation barrier Detachable Mounting hole. (0) 0.57 () MB pole 0.97 dia hole (M or ø5) MB pole (pole) 0.97 dia hole (M or ø5) 0.8 () 0.8 () 0.59 (5) 0.59 (5) ON. (55) 5.5 (5).0 ().99 ().9 (8) Trip button. (55) 5.5 (5).0 ().9 (8).99 () Trip button 0. dia (ø8.). (57) 0.77 dia (ø.5) 5.97 () 5.97 ().99 () 0.5 (8).05 (5). (0).8 (0).99 () 0.5 (8). (0). (85).5 (90) 0.8 (.5) 0.7 (7).5 ().77 (8).7 (95).8 (0) Front panel cutting R0.078 (R) or less.07 (5) or more MB R0.078 (R) or less.07 (5) or more MB Terminal section 0.9 () 0.5 (8.5) 0.9 (7) M8 x 0.95 () Max. 0.5 (.5) 0.5 dia (ø9) 0.5 (8) t<0. () *Note: pole breaker is supplied in pole frame with current carrying parts omitted from center pole..8 (58) or more.5 (87) or more BW*UP, P pole (pole)*.5 (80) 0.5 (8) Insulation barrier Detachable Mounting hole 0.8 (). (0) 0.57 () MB Panel drilling 0.97 dia hole (M or ø5) R0.078 (R) or less Front panel cutting MB.9 (5) 5.7 ().0 ().79 (5.5).99 () 0.59 (5) Trip button ON 0. dia (ø8.). (57) 0.77 dia (ø.5).9 ().07 (5) or more.5 (80) 0.5 (8).75 (70).97 (0). (5) 0.8 (.5) 0.7 (7).5 ().77 (8).7 (95).78 (5) Terminal section (5.5) 0. (.5) 0. () 0.95 () M8 x.0 () or more *Note: pole breaker is supplied in pole frame with current carrying parts omitted from center pole. 5

17 Dimensions: inch (mm) BW00*UP, P. (5).8 (57). (5) (5) 8.5 (5). (.5) 0. () 0.98 (5) Pole (pole)* 5.5 (0) 5.5 (5).5 (88).07 (5). (0).05 (5).05 (5).7 () Insulation barrier Detachable. (.5) 0.95 (.5) Mounting hole Trip button M x 5 bolt 5 (7).0 ().5 (90) 0.57 () 0.57 () 0.5 dia (ø.5) 0.5 (8) 5.78 (). (7.5).055 ().7 (9.5).07 (8).7 () 0.7 dia (ø7) 0.7 dia hole (M or ø7) Panel drilling.7 () MB 8.5 (5) R0.078 (R) or less Front panel cutting 5.9 (7) or more *Note: pole breaker is supplied in pole frame with current carrying parts omitted from center pole. MB. (9) or more BW0*UP 5.78 (). () 0.5 (8) 0.59 (5). (5).5 (87). (5).87 (75).5 (87) 9.57 ().7 ().75 (70) 8.8 ().75 (70).07 (5) 8.07 (05). (9).75 (70) Insulation barrier Detachable Mounting hole 0.95 (.5) Trip button 5 (7) M x.575 (0) Hexagon head bolt 0.57 () 0.57 ().0 ().5 (90) 0.5 dia (ø.5). (7.5).055 ().7 (9.5) 0.7 (7) 0.7 (7).07 (8) 0.7 dia (ø7) 0.7 dia hole (M or ø7) Panel drilling.75 (70) MB 9.57 () R0.078 (R) or less Front panel cutting 8.5 (07) or more MB min.. (9).5 (8.5)

18 Dimensions: inch (mm) BW800*UP. () 0.5 (8) 0.59 (5). (5).87 (75). (5).5 (87) 9.57 ().5 (87).7 ().75 (70) 8.8 ().75 (70).07 (5). (9) 8.07 (05).75 (70) 0.95 (.5) Insulation barrier Detachable Mounting hole Trip button M x.575 (0) Hexagon head bolt 5 (7).0 ().5 (90) 0.57 () 0.57 () 0.5 dia (ø.5) 5.78 (). (7.5).055 ().7 (9.5).07 (8) 0.7 dia (ø7) 0.5 (8) 0.5 (8) 0.7 dia hole (M or ø7) Panel drilling.75 (70) MB 9.57 () R0.078 (R) or less Front panel cutting 8.5(07) or more MB min..(9). (.5) EW5*UP.99 () 0.5 (8). (55) 5.5 (5).0 () 0.8 ().9 (8) Insulation barrier Detachable Mounting hole E trip indicating button Sensitive current selection switch ON 0.59 (5).99 () Trip button 0. dia (ø8.). (0). (57) 0.57 () 0.77 dia (ø.5) 5.97 () EB Panel drilling 0.97 dia hole (M or ø5) R0.078 (R) or less.07 (5) or more Front panel cutting EB.99 () 0.5 (8) Megger test switch. (0). (85).5 (90) selection switch Test button 0.8 (.5) 0.7 (7).5 ().77 (8).7 (95).8 (0).5 (87) or more Terminal section 0.9 (7) 0.9 () 0.5 (8.5) M8 x 0.95 () Max. 0.5 (.5) 0.5 dia (ø9) 0.5 (8) t<0. () 7

19 Dimensions: inch (mm) EW*UP.5 (80) 0.5 (8).9 (5) 5.7 ().0 ().79 (5.5) Insulation barrier Detachable Mounting hole 0.8 () E trip indicating button Sensitive current selection switch 0.59 (5).99 () Trip button ON 0. dia (ø8.). (0) () 0.77 dia (ø.5).9 () EB Panel drilling 0.97 dia hole (M or ø5) R0.078 (R) or less.07 (5) or more Front panel cutting EB.5 (80) 0.5 (8) Megger test switch.75 (70).97 (0). (5) selection switch Test button 0.8 (.5).5 () 0.7 (7).77 (8).7 (95).78 (5) Terminal section (5.5) 0. (.5) 0. () M8 x.0 () or more 0.95 () EW00*UP. (5).8 (57). (5) (5) 8.5 (5). (.5) 0. () 0.98 (5) 5.5 (0) 5.5 (5).5 (88).7 ().07 (5). (0). (.5) Insulation barrier Detachable Mounting hole E trip indicating button Sensitive current selection switch selection switch 0.95 (.5).5 (55) Test button Trip button Megger test switch M x 5 bolt 5 (7).0 ().5 (90) 5.78 (). (7.5) 0.57 ().055 () 0.57 ().7 (9.5) 0.5 dia (ø.5) 0.5 (8).07 (8).7 () 0.7 dia (ø7) 0.7 dia hole (M or ø7) Panel drilling.7 () EB 8.5 (5) R0.078 (R) or less Front panel cutting 5.9 (7) or more EB. (9) or more.05 (5).05 (5) EW0RAGUP 5.78 (). () 0.5 (8) 0.59 (5). (5).5 (87).7 () 8.8 ().75 (70).75 (70).07 (5).75 (70) Insulation barrier Detachable Mounting hole E trip indication button Sensitive current selective switch selective switch 0.57 () 0.57 () 0.5 dia (ø.5). (7.5).055 ().7 (9.5) 0.7 (7).07 (8) 0.7 dia (ø7) Panel drilling.75 (70) MB R0.078 (R) or less Front panel cutting MB. (5).87 (75) 9.57 ().5 (87) 8.07 (05). (9).87 (8.5) 0.95 (.5) Test button.5 (55) Trip button M x.575 (0) Hexagon head bolt 5 (7).0 ().5 (90) Megger test switch 0.7 (7) 0.7 dia hole (M or ø7) 9.57 () 8.5 (07) or more min.. (9).5 (8.5) 8

20 Dimensions of Terminal Blocks for Internal Accessories: inch (mm), 0A Frame 5, A Frame 00, 0, 800A Frame terminal block 0.75 (9).7 (9).7 (7.5) 0.5 (.5) 0.5 (.5).5 (8) terminal block H. () Dimensions of Undervoltage/Shunt trip device and 0AF Only 0.5 (.5) 0.5 (.5) Breakers W x H BWRAGUP, BW0EAGUP.0 (5) x.9 (0) BWRAGUP, BW0EAGUP EWRAGU, EW0EAGU.0 (5) x.9 (0) W Dimensions of Terminal overs: inch (mm) A B Breaker Type Black Transparent BW9BTAAS (Short) BW9BTAA (ong) BW9BTAAS (Short) BW9BTAA (ong) BW9BTAS (Short) BW9BTA (ong) BW9BTAS (Short) BW9BTA (ong) BW9BTGAS (Short) BW9BTGA (ong) BW9BTHAS (Short) BW9BTHA (ong) BW9BTJA (ong) Graywhite BW9BTAASW ** (Short) BW9BTAAW (ong) BW9BTAASW** (Short) BW9BTAAW (ong) BW9BTASW** (Short) BW9BTAW (ong) BW9BTASW** (Short) BW9BTAW (ong) BW9BTGASW** (Short) BW9BTGAW (ong) BW9BTHASW (Short) BW9BTHAW (ong) BW9BTJAW (ong) Dimensions: Inch(mm) A B.99 ().99 ().95 (75).95 (75). (0). (0).5 (90).5 (90). (5). (5) 5.5 (0).77 (7) 8.8 () 0.8 (9.8).575 (0) 0.8 (9.8).575 (0) 0.5 (8).575 (0) 0.5 (8).575 (0) 0.5 (8).99 ().559 (5). (). (55). (5.5). (5.5). (5.5). (5.5).8 (.5).8 (.5).8 (.5).8 (.5).8 (.5).8 (.5).858 (98).858 (98).858 (98) Applicable Breakers BWRAGUP, BW0EAGUP BWRAGUP, BW0EAGUP EWRAGUP, EW0EAGUP EW0EAGUP BW5*UP BW5*UP EW5*UP BW*UP, BW*UP EW*UP BW00*UP, BW00*UP EW00*UP BW0*UP, BW800*UP EW0*UP **A Graywhite terminal cover provied with BWU, BW0U, BW5U, BWU, EW0U, EW5U, EWU amp frame. 9

21 Internal Accessories for GTWIN,0AF Breaker type: BW, BW0, EW, EW0 Auxiliary switches and alarm switches ead wire type BWRAGU, EWRAGU BW0EAGU, EW0EAGU With terminal block type BWRAGU, EWRAGU BW0EAGU, EW0EAGU Aux Aux low current Alarm Alarm low current Aux & Alarm Aux & Alarm low current * for pole type only W WD K KD WK WDKD eft side BZWU* BZWDU* BZKU* BZKDU* BZWKU* BZWDKDU* Right side BZWRU BZWDRU BZKRU BZKDRU BZWKRU BZWDKDRU Aux Aux low current Alarm Alarm low current Aux & Alarm Aux & Alarm low current * for pole type only W WD K KD WK WDKD eft side BZWAU* BZWDAU* BZKAU* BZKDAU* BZWKAU* BZWDKDAU* Right side BZWRAU BZWDRAU BZKRAU BZKDRAU BZWKRAU BZWDKDRAU Rating Standard; Aux, Alam For low current; Aux, Alam Breaker type BWRAGU, EWRAGU BW0EAGU, EW0EAGU Minimum load Breaker type BWRAGU, EWRAGU BW0EAGU, EW0EAGU Minimum load Operating voltage V A 0V A 5V D V D Rated current (A) V D 0mA 0V D 0mA Operating voltage 0V D Rated current (A) 0. 5V D ma 0V D ma Operation Type of switch Auxiliary switch (W) ondition of MB ON OFF TRIP /AXc /AXa /AXc /AXa /AXb /AXb Alarm switch (K) 9/Ac 9/Aa 9/Ab 9/Ac 9/Aa 9/Ab Shunt trip devices Breaker type BWRAGU BW0EAGU Operating voltage ode Part number Spec ead wire type With terminal block type Input (VA) Internal circuit VA, VD FR BZFRU BZFRAU ontinuous with burnout 0VA 0VD FA BZFAU BZFAAU prevention circuit 000VA FK BZFKU BZFKAU Time rating (ms) 7 80VA FP BZFPU BZFPAU 00 EWRAGU EW0EAGU 0VA Hz 0VA 0Hz 00VA Hz 000VA 0Hz 00VA Hz 000VA 0Hz F F7 F8 BZFAU BZF7AU BZF8AU ontinuous 7 Undervoltage trip devices Breaker type Operating voltage ode Part number Spec ead wire type With terminal block type Input (VA) Operating voltage BWRAGU 0VA Hz R BZRAU BW0EAGU 0VA 0Hz 00VA Hz RW BZRWAU EWRAGU 000VA 0Hz EW0EAGU 00VA Hz R9 BZR9AU 000VA 0Hz Tripping voltage: 70% to 5% of rated voltage losing voltage: 85% or more of rated voltage 0

22 Internal Accessory ombinations for GTWIN,0AF Breaker type: BW, BW0, EW, EW0 P P eft Right Right Auxiliary switch: W Shunt trip: F Shunt trip: F (External mounting method) Handle Handle Alarm switch: K Undervoltage trip: R MB BWRAGUP BW0EAGUP BWRAGUP BW0EAGUP EB EWRAGUP EW0EAGUP EW0EAGUP Pole, Pole Auxiliary switch SPDT W Alarm switch SPDT K Shunt trip F Undervoltage trip R W W+K W+K K W+K W+K W+F W+F W+R W+R K+F K+R W+K+F W+K+R K+F Auxiliary switch SPDT W Alarm switch SPDT K Shunt trip F Undervoltage trip R W W+K W+K K W+K W+K W+F W+R W+R K+F K+R K+R W+K+F W+K+R W+K+R W+K+R W+K+R K+R W+K+F W+K+R W+K+F W+K+R W+K+F W+K+R

23 Internal Accessories for GTWIN 5, AF Breaker type: BW5, EW5, BW, EW Accessory ode Part number Operating voltge ead wire type With terminal block type eft side Right side eft side Right side Auxiliary switch W BW9WSG0 BW9WSG0R BW9WSG0A BW9WSG0RA Auxiliary switch (low current) Alarm switch Alarm switch (low current) BW9WDG0 BW9KSG0 BW9KDG0 BW9KSG0A BW9KSG0RA Auxiliary switch + Alarm switch BW9WKSG0 BW9WKSG0A BW9WKSG0RA Auxiliary switch + Alarm switch (low current) Earth alarm switch* BW9WKDG0 Shunt trip device BW9FRG0 V A/D Undervoltage trip device * for EB only K 8 WK 8 FR FS FA F FK FB FP FH FJ RR RS R R5 RA RT RK RB RP RH BW9FSG0 BW9FAG0 BW9FG0 BW9FKG0 BW9FBG0 BW9FPG0 BW9FHG0 BW9FJG0 BW9RGAR BW9RGAS BW9RGA BW9RGA5 BW9RGAA BW9RGAT BW9RGAK BW9RGAB BW9RGAP BW9RGAH BW9WDG0R BW9KSG0R BW9KDG0R BW9WKSG0R BW9WKDG0R BW9SG0 BW9FRG0 BW9FRG0RA BW9FSG0 BW9FSG0RA 8V A/D BW9FAG0 BW9FAG0RA 0V A/0V D BW9FG0 BW9FG0RA 0V A BW9FKG0 BW9FKG0RA 000V A/000V D BW9FBG0 BW9FBG0RA 77V A BW9FPG0 BW9FPG0RA 800V A BW9FHG0 BW9FHG0RA 080V A BW9FJG0 BW9FJG0RA 05V A V D 8V D 0V D 5V D 0V A 0V A 000V A 77V A 805V A 080V A 00, 0, 800AF Breaker type: BW00, EW00, BW0, EW0, BW800 Accessory ode Part number Operating voltge ead wire type eft side With terminal block type eft side Auxiliary switch x W BW9WSHA BW9WSHAA Auxiliary switch x V BW9WSHA Auxiliary switch (low current) x BW9WDHA Auxiliary switch (low current) x BW9WDHA Alarm switch x K BW9KSHA BW9KSHAA Alarm switch x J BW9KSHA Alarm switch (low current) x 8 BW9KDHA Alarm switch (low current) x 9 BW9KDHA Shunt trip device FR BW9FHAR BW9FHARA 8V A/D FA BW9FHAA BW9FHAAA 00V A/00V D FB BW9FHAB BW9FHABA 77V A FP BW9FHAP BW9FHAPA 805V A Undervoltage trip device RR BW9RHAR V A/D RS BW9RHAS 8V A/D RA BW9RHAA 0 A/D R BW9RHA 0V A/5V D RK BW9RHAK 000V A/000V D RB BW9RHAB 77V A RP BW9RHAP 8080V A

24 Internal Accessories for GTWIN Operation of auxiliary switches (W) and alarm switches (K) Accessory Auxiliary switch SPDT: W () Handle position ON OFF Trip /AXc /AXa /AXb /AXc /AXa /AXb PDT: V () /AXc /AXa /AXb /AXc /AXa /AXb /AXcR /AXaR /AXcR /AXaR /AXbR /AXbR Alarm switch SPDT: K (8) 9/Ac 9/Aa 9/Ab 9/Ac 9/Aa 9/Ab PDT: J (9) 9/Ac 9/Aa 9/Ab 9/Ac 9Aa 9/Ab 0/AcR 0/AaR 0/Ac 0/Aa 0/AbR 0/Ab Note: Wire ring mark indication ( ) ode of low current type Operation of earth alarm switch () Accessory Handle position ON/OFF/Overcurrent trip Earth alarm switch 7 7 E trip Ratings of auxiliary switches (W) and alarm switches (K) Standard type Breaker type BW5, BW BW00 BW0 BW800 EW5, EW EW00 EW0 Rated thermal current (A) 5 Make/break current (A) A Voltage (V) Res. load 5 Ind. load D Voltage (V) 8 5 Res. load Ind. load Minimum load current 5V D 0mA 0V D 0mA ow current type Breaker type BW5, BW BW00 BW0 BW800 EW5, EW EW00, EW0 Rated thermal current (A) 0. Make/break current (A) A Voltage Res. Ioad (V) 0 0. D Voltage (V) 0 Res. Ioad 0. Minimum load current 5V D ma

25 Internal Accessories for GTWIN Rating of shunt trip (F) Breaker type A D Time rating of coil Opearting time V VA V W (ms) BW5, BW EW5, EW BW00, BW0, BW800 EW00, EW ontinuous (With NO contact to prevent coil burnout) ontinuous 80 Note: Allowable voltage function A voltage: 85% to % of coil rated voltage D voltage: 75% to 5% of coil rated voltage Rating of undervoltage trip (R) Breaker type A V D VA V W ode BW5 * BW * EW5 * EW * BW00 * EW00 * BW0 * EW0 * BW800 * Note: Allowable voltage function A voltage: 85% to % of coil rated voltage D voltage: 75% to 5% of coil rated voltage * Resetallowed type: When the breaker handle is in the OFF or RESET state, tripping does not occur even if the R coil is not energized. Turning ON with the R coil not energized causes normal tripping. * Resetprohibited type: When the R coil is not energized, reset operation cannot reset the tripped breaker to the OFF state RR RS R R5 RA RT RK RB RP RH RR RS RA R RK RB RP ead wire specification Wire size: AWG0 (0.5mm ) Wire length: 9.9 inch (0mm)

26 Internal Accessory ombinations for GTWIN MB Available configurations pole pole Right eft Right Undervoltage trip: R Shunt trip: F Auxiliary switch: W Alarm switch: K Handle Handle MB BW5JAGUP BW5 BW (Except for BW5JAGUP) BW00 BW0 BW800 Pole,, Auxiliary switch SPDT: W () Alarm switch SPDT: K (8) Shunt trip: F Undervoltage trip: R W+K (+8) Auxiliary switch PDT: V () Alarm switch PDT: J (9) V+K (+8) W+J (+9) V+J (+9) W+F (+F) W+R (+R) K+F (8+F) K+R (8+R) W+K+F (+8+F) W+K+R (+8+R) V+F (+F) V+R (+R) J+F (9+F) J+R (9+R) V+K+F (+8+F) V+K+R (+8+R) W+J+F (+9+F) W+J+R (+9+R) V+J+F (+9+F) V+J+R (+9+R) Notes: The above table is applied to front mounting type, rear mounting type, flush mounting type, and plugin mounting type. Terminal block is attached on the same side of the accessory. ( ) ode of low level circuit 5

27 Internal Accessory ombinations for GTWIN EB Available configurations pole pole Handle Right eft Handle Right Undervoltage trip: R Shunt trip: F Auxiliary switch: W Alarm switch: K Earth alarm switch: EB EW5 EW EW00 EW0 Pole Auxiliary switch SPDT: W () Alarm switch SPDT: K (8) Shunt trip: F Undervoltage trip: R W+K (+8) Auxiliary switch PDT: V () Alarm switch PDT: J (9) V+K (+8) W+J (+9) V+J (+9) W+F (+F) W+R (+R) K+F (8+F) K+R (8+R) W+K+F (+8+F) W+K+R (+8+R) V+F (+F) V+R (+R) J+F (9+F) J+R (9+R) V+K+F (+8+F) V+K+R (+8+R) W+J+F (+9+F) W+J+R (+9+R) V+J+F (+9+F) V+J+R (+9+R) Earth alarm switch SPDT: * Notes: The above table is applied to front mounting type, rear mounting type, flush mounting type, and plugin mounting type. Terminal block is attached on the same side of the accessory. ( ) ode of low level circuit * Earth alarm switch can be mounted regardless of the combination of other accessories.

28 External Accessories Operating handles onforms to EN097 isolation function. Available for EN00 power breaking device. onforms to U89(File No. E989) N type handles Breaker Breaker V type handles N type handle on breaker Decorative plate V type handle on panel BW9N0A N type handle BW9V0A V type handle Part number Applicable Breakers N type (Breaker mount) BZND BW9N0A BW9N0GA BW9N0HA BW9N0JA V type (Door mount) BZVD BW9V0A BW9V0GA BW9V0HA BW9V0JA BWRAGU, BW0EAGU, EWRAGU, EW0EAGU BW5*, EW5 BW, EW BW00, EW00 BW0, EW0, BW800 * Note that the external operating handle cannot be mounted to the BW5JAGUP. Use the BW5RAGUP. Terminal covers These terminal covers are used as guards to prevent accidental touch with live line terminations. These terminal covers can be fitted to either line or load side. Short type Short type ong type Black Transparent GrayWhite Packing QTY Applicable Breakers BW9BTAAS BW9BTAASW* BWRAGUP, BW0EAGUP BW9BTAAS BW9BTAASW* BWRAGUP, BW0EAGUP, EWRAGUP, EW0EAGU BW9BTAS BW9BTASW* BW5JAGUP BW9BTAS BW9BTASW* BW5JAGUP, EW5*UP BW9BTGAS BW9BTGASW* BW*UP, BW*UP, EW*UP BW9BTHAS* BW9BTHASW* BW00*UP, BW00*UP, EW00*UP Notes: * Graywhite short type terminal covers are provided with breaker as standard for AF, 0AF, 5AF and AF GTWIN breakers. * Not available with Flat terminal. ong type Black Transparent GrayWhite Packing QTY Applicable Breakers BW9BTAA BW9BTAAW BWRAGUP, BW0EAGUP BW9BTAA BW9BRAAW BWRAGUP, BW0EAGUP, EWRAGUP, EW0EAGU BW9BTA BW9BTAW BW5JAGUP BW9BTA BW9BTAW BW5*UP, EW5*UP BW9BTGA BW9BTGAW BW*UP, BW*UP, EW*UP BW9BTHA BW9BTHAW BW00*UP, BW00*UP, EW00*UP BW9BTJA BW9BTJAW BW0*UP, EW0*UP, BW800*UP 7

29 External Accessories Insulation barriers The barriers are installed in the molded slots between terminals. Installation of these barriers after wiring is possible even when an external accessory is installed. Insulation barriers Type Packing quantity BZB BW9BPA BW9BPGA BA Applicable Breakers BWRAGU, BW0EAGU, EWRAGU, EW0EAGU* BW5, EW5* BW, EW* BW00, EW00, BW0, EW0, BW800* Note: * Insulation Barriers are required only for flat terminal type. * Insulation Barriers for line side and load side are provided with the Breaker. Terminal kits (Field installable) Flat Terminal Kits ug Terminal Kits Applicable Breakers Type Packing quantity Type Packing quantity BZSU0B BWRAGU, EWRAGU BUSU5B BW0EAGU, EW0EAGU BW9SS0A GOBA BW9S0A GOBA BW5, EW5 BZSB5 GOBA BW9S0GA GOBA BW, EW (5A75A) BW9SGA GOBA BW, EW (00AA) Padlocking device and Handle locking cover Description Padlocking device These padlocking devices lock the breaker handle in the OFF position. Use a commercially available padlock with a shackle diameter of.5 to 5mm (5mm for the BZA). Handle locking cover These padlocking devices lock the breaker handle in the ON/OFF position. Tripping is possible while the breaker is locked ON. Applicable Breakers Padlocking device Handle locking cover Q, QN: ap type Q: Plate type BW, BW0, EW, EW0 BZA Not available BZ* BW5, EW5 BW9QA BW9QA Not available BW, EW BW9QA BW9QGA Not available BW00, EW00 BW9QNHA* BW9QHA Not available BW0, EW0, BW800 BW9QNHA* BW9QJA Not available * ON and OFF locking is possible Padlocking device for BW and EW ap type Q, QN Plate type Q BW9QA BW9QGA 8

30 Operating Handles Dimensions: inch (mm) A,0A Frame N type handle (BZNPD: dust proof packing, optional). (5) INE SIDE Handle / 0. dia (ø5). (5). dia (ø) MB EB Handle / MB EB Handle /.55 dia (ø90).07 (78) OAD SIDE Panel thickness 0.07 to 0. (. to.).9 (9).0 ().07 (78) Panel cutting (Scale :).5 (8) Pad lock 0. to 0. dia (ø to ø8) 0. () 0.9 () MB,EB 0. (.5) 0.7 () 0. (.5) 0. () 0. (8) 0.55 () 0.7 (7) 0.9 () Handle type BZND Applicable Breakers BWRAGU, EWRAGU BW0EAGU EW0EAGU Mounting screw #8.9 M 80 Note: When using a Dustproof packing, handle protection structure is IP (IE 059, JIS 090) (00).5 (85) Width.97 () Width.95 (75) Install the door hinge in the shaded area.5 (85).09 (). () 7.87 (00) A,0A Frame V type handle (BZVSD: optional shaft).5 () 0. dia (ø5) INE SIDE Handle /.5 ().8 dia (ø) MB EB handle / Breaker /.55 dia (ø90).07 (78) OAD SIDE Panel thickness: 0.07 to 0. (. to.). (). (5) (H).5 (8) Pad lock 0. to 0. dia (ø to ø8).07 (78) Panel cutting (Scale :). (5).87 (7) 0.79 (0) 0.59 (5) 7.87 (00) Width.97 () Width.95 (75). (0). (0) 0.59 (5) 0.79 (0) 7.87 (00).87 (7). (5) Handle type BZVD Applicable Breakers BWRAGU EWRAGU BW0EAGU EW0EAGU Dimensions: inch (mm) H Standard with the optional shaft.± to 9.8 (5±) ( to ) Note: Handle protection degree is IP5 (IE059, JIS 090). Install the door hinge in the shaded area. Optional shaft (BZVSD) X=H. (5) X The distance between the handle and breaker can be shortened by cutting the optional shaft (X=H. (5)). 9

31 Operating Handles Dimensions: inch (mm) 5A, A Frame N type handle BW9N0A, BW9N0GA (BZNP: dust proof packing, optional). (5).5 (8).07 (5.5) ine Panel MB MB handle / Dust proof packing(optional) 0.59 dia (ø5) MB Handle / Door panel cutting Handle /.5 dia (ø90).07 (78).55 (9) 0.87 () 7.87 (00) 7.87 (00). (85). (85) Padlock size.99 (9) 0.57 dia to 0.5 dia (ø to ø8) 0.59 (5) 0.09 () Handle / 0.57 () 0.7 (7). (8).7 () oad Max..559 (5) Thickness: 0.07 to 0. (. to.) H.99 ().07 (78) Note: Align the center of the hole cut in the panel with the center of the breaker handle. Install the hinge in the shaded area. Breaker type Handle type Mounting screw H: inch(mm) Mass lb. (kg) BW5 BW9N0A M x.5(85).055± (0.5) EW5 BW BW9N0GA M x.5(85) (±).055± (0.5) EW (±) P P P Handle / 00A, 0A, 800A Frame N type handle BW9N0HA, BW9N0JA (BZNP: dust proof packing, optional) Decorative plate 5.90 () ine Panel Mounting screw Door panel cutting.09() 0.59 dia (ø5) MB handle / 5.90 ().78 (9).78 (9) 0.9 (7) ock plate Padlock size 0.57 dia (ø) to 0.5 dia (ø8) (Up to 0.5 dia (ø8) padlocks can be mounted.) Panel thickness: (..).087 (5).8±0.078 (57±).559 (5).559 (5).09 ().78 (5) 0.98 (5) 0.59 (5) oad Handle /.97 (0).97 (0) 0.95 (7.5) 0.98 (5) 5. dia (ø8) MB handle / MB handle / Note: Align the center of the hole cut in the panel with the center of the breaker handle. 7.87(00) 7.87(00).78 (5) Install the door hinge in the shaded area. Breaker type Handle type Mounting screw Mass lb. (kg) BW00, EW00 BW9N0HA M x. ().9 (.9) BW0, EW0, BW800 BW9N0JA M x. ().9 (.9) 0

32 Operating Handles Dimensions: inch (mm) 5A, A Frame V type handle BW9V0A, BW9V0GA (BW9VSG0: optional shaft) ine.9 () MB Panel.77 (8) 0.59 dia (ø5) Door panel cutting Handle /.9 () MB handle / MB Handle /.5 dia (ø90).07 (78).07(78) oad.99 (9) Panel thickness: 0.07 to 0. (. to.).559 (5) H Note: Align the center of the hole cut in the panel with the center of the breaker handle. Padlock size 0.57 dia to 0.5 dia (ø to ø8) Handle / P P P Optional shaft BW9VSG0 X = H.7 (95) X. () Door hinge installation area /.7 ().7 (). (0). (0).0 (7).8 (0).99 (9).0 (7) 0.5 (8) 0.09 () 0.59 (5) Install the door hinge in the shaded area. Breaker type Handle type Standard type With the optional shaft (X=.0(5)) Mounting Mass H: inch(mm) H: inch(mm) Area in which the hinge with H can be installed screw lb. (kg) BW5, EW5* BW, BW* BW9V0A BW9V0GA.±0.078 (5±).±0.078 (5±) 9.8±0.078 (±) 9.8±0.078 (±) 5.5 to 9.8 (0 to ) 5.5 to 9.8 (0 to ) M x.5(85) M x.5(85).8 (0.7).8 (0.7) Notes: The handle does not have any means to hold the door. Provide it separately. Not available for side mounting. * Note that the external operating handle cannot be mounted to the BW5JAGUP. Use the BW5RAGUP. * When mounting a terminal cover, cut away part of it because it hides the mounting screws for the breaker. Remove the shaded parts in the figure below.

33 OFF Operating Handles Dimensions: inch (mm) 00A, 0A, 800A Frame V type handle BW9V0HA, BW9V0JA (BZVS: optional shaft) Panel Decorative plate 5.90 () ine Door panel cutting.09 () 0.9 dia (ø) MB handle / 5.90 ().09 () 5. dia (ø8) MB handle / Mounting screw Panel thickness: (..) H.8 () 5.90 () ock plate Padlock size 0.57 dia (ø) to 0.5dia (ø8) (Up to 0.5 dia (ø8) padlocks can be mounted.) oad 0.9 () MB handle / Note: Align the center of the hole cut in the panel with the center of the breaker handle. Optional shaft (BZVS).5 (55) X.8 (0) When using the BZVS extension shaft to adjust dimension H, cut it according to the equation below. X=H.58 (.5).97 (0) 7.87 (00) Install the door hinge in the shaded area. Breaker type BW00, EW00 BW0, EW0, BW800 Handle type BW9V0HA BW9V0JA Standard type H: inch(mm) 7.8±0.078 (90±) With the optional shaft (X=.0 (5)) Mass H: inch(mm) Area in which the hinge with H can be installed lb. (kg) 9.8± to 9.8 (0 to ).85 (.) (±) Note: The handle cannot hold the door. Not available for side mounting.

34 Wiring. onnecting Precautions When connecting the wires, follow the instruction of NE (National Electric ode, USA) or E (anadian Electrical code Part, anada). For connecting, use copper wire rated for 75. It is recommended to use U or SA approved wires. Keep the connection of the wire sufficiently tight, because a very large electromagnetic force will be generated, when the short circuit current is applied. Perform additional tightening of the terminal screws periodically.. Terminal onstruction. Allowable wire spec for ug Terminals Screw Terminals Flat Terminals ug Terminals Number of strands connecting wires A, 0A Frame 5A, A Frame 00A, 0A, 800A Frame Wire size AWG or MM (mm ) (..) /0 (. 7.) Number of wires strands 7 9 : Available : Not available 0 (7 ) 7 (mm ) Values are those converted from AWG or MM size aution Two wires can not be connected to the lug terminal at once. Follow the number of strands of wire indicated in the table. Multiconductor wire can not be connected. Do not solder the end of the wire. Max Wire Sizes and Tightening Torque Type BWRAGU EWRAGU BW0EAGU EW0EAGU BW5 EW5 BW EW BW00 EW00 BW0 EW0 BW800 Rated current (A) Wire size AWG or MM (mm ) AWG (.mm ) AWG (.mm ) AWG (.mm ) AWG (.mm ) AWG (.mm ) AWG (5.mm ) 8 AWG (8.mm ) 8 AWG (8.mm ) AWG (.mm ) AWG (.mm ) AWG (.7mm ) AWG (.mm ) AWG (.mm ) AWG (5.mm ) 8 AWG (8.mm ) AWG (.mm ) AWG (.mm ) AWG (.7mm ) Tightening torque Applicable ring (crimp) terminal* Screw terminal Flat terminal ug terminal JST NIHIFU DST (U file No.E0) R5 (U file No.E5) (U file No.E797) 05 lb.in (..8 Nm) 9 lb.in ( Nm) 5 lb. In. (5.8 Nm) AWG (.mm ) AWG (.mm ) 9 lb. In. /0 AWG (5.5mm ) (.5 Nm) /0 AWG (7.mm ) /0 AWG (85.0mm ) /0 AWG (7.mm ) MM (7mm ) MM (7mm ) MM (77mm ) 0 MM (5mm ) /0 AWG x (85.0mm x ) 0MM x 0MM x 0MM x 0MM x /0 AWG00MM x 0 lb.in. (.5.5 Nm) 789 lb.in (8 Nm) 80 lb. In. (9 Nm) 80 lb. In. (9 Nm) 98 lb. In. (5 Nm) lb. In. (7.0 Nm) lb. In. (7.0 Nm) 5 lb. In. (5.8 Nm) 0 lb. In. ( Nm) 85 lb. In. (.5 Nm) 8 lb. In. (.9 Nm) 75 lb. In. (.07 Nm) 75 lb. In. (.07 Nm) R5.55 R85 R8 S8 8S8 R8 5.5S8, R NS, R88 8NS, S8, R8 S8, R8, BS8 8S8 8S8, R88 0S8, R B80S8 B0S8 BS R80 R R8 R.58, R5.58 R5.58 R88 R8S, R8 S8, 8 R8S, R8, B8S S8, 8, B8 R88S R8S, R88 8S8, 88 R08, B08, B08S 08, B08 R B808 B08 BB B8 R R80 R5S R80 R5N 8, B8.58, S8 R R80 R5* R5* Notes: * Ring (rimp) Terminal Manufacturer : * 7F (75) opper wire JST=Japan Solderless Terminal MFG o., td. ( ) NIHIFU=Nichifu Terminal o., td. ( america@nichifu.com ) DST=Daido Solderless Terminal MFG o., td. ( info@daidotanshi.jp )