LS1 LED SQ DATE PROJECT FIRM TYPE

Transcription

1 DATE PROJECT FIRM TYPE LS1 LED SQ Narrow, linear luminaire with square lens. For use in indoor applications where an LED luminaire with small profile providing continuous light is required. Suspended, surface or wall mount installation. FEATURES Available In Custom Lengths & Long Runs To 1/16 Accuracy Square Diffuser Damp Location Rated CRI 90+ Standard 5 Year, 50,000 Hour Fixture Warranty 2700K, 3000K, 3500K, 4000K & 5000K Color Temperatures Available Enlighted/Wattstopper Sensors Available APPLICATIONS Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors CONSTRUCTION Extruded Aluminum Housing, Steel End Caps, Formed Steel Gear Tray OPTICS Square, Extruded High Transmission Satin Acrylic Lens With No LED Imaging WARRANTY 5 Year Limited Warranty (Covers Standard Components) FINISH Standard Powder-Coated White. Custom RAL Colors Available FIXTURE RATINGS & CERTIFICATIONS Union Made ETL Listed Made In The USA Damp Location Rated ELECTRICAL Integral Driver With 0-10V 10% Dimming Standard. Several Driver Options Available. See Below For Lutron Dimming Information 2-Wire Forward Phase; Hi-Lume 1% Dimming, Only Available For 120V 3-Wire EcoSystem; Hi-lume 1% Dimming Digital EcoSystem; Hi-lume 1% Dimming, Soft-on Fade-to-black (Required for Daylighting) 5 Series EcoSystem; 5% Dimming LTEA L3DA LDE1 LDE5 EXTRUSION DIMENSIONS LED SYSTEM INFORMATION Standard (LTG1) Low (LTG2) Nominal System Watts 7.25 W/ft 5 W/ft Nominal Delivered Lumens 690 Lm/ft 475 Lm/ft Nominal Efficacy 95 Lm/W 95 Lm/W High (LTG3) 8.75 W/ft 795 Lm/ft 91 Lm/W Based on a 3500K luminaire using one driver. Please consult factory for custom lumen outputs & wattage. ORDERING FIXTURE ID LS1 LED SQ 2 - LENGTH 2-2 ft 4-4 ft 8-8 ft x -x - Custom (specify length) 3 - COLOR TEMP 4 - LED SYSTEM K/90 CRI LTG1 - Standard K/90 CRI LTG2 - Low K/90 CRI LTG3 - High K/90 CRI C - Custom Output K/90 CRI (ie-c550lm/ft) TW* - Tunable White RGBW* - RGB K *Must use DMX Driver (Remote) 5 - VOLTAGE UNV - Universal (120/277V) 6 - DRIVER DB - Standard 10% Dimming (0-10V) DB1% - 1% Dimming (0-10V) DB.01% -.01% Dimming (0-10V) LTEA* - Lutron 2-wire 1% Dimming L3DA* - Lutron 3-wire 1% Dimming LDE1* - Lutron Digital EcoSystem LDE5* - 5 Series EcoSystem; 5% Dimming *Refer to Electrical Information Above DMX - For Color Tuning and RGBW 7 - FINISH W - White (Standard) BLK - Black CC - Custom Color (provide RAL#) 8 - MOUNTING AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 9 - CONTROL EIS - Integral Sensor by Enlighted WIS - Integral Sensor by Wattstopper 10 - OPTICS SD - Standard Diffuser 11 - OPTIONS EM 120V - Emergency Pack EM 277V - Emergency Pack CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/3

2 DATE PROJECT FIRM TYPE LS1 LED SQ MOUNTING OPTIONS AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 1-5 Round Canopy (Standard White Finish) 2 - Canopy Retainer 3 - SJT Cord (Standard White) 4 - Air Craft Cable 5 - Gripper 1 - Threaded Rod (not supplied) CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/3

3 DATE PROJECT FIRM TYPE LS1 LED SQ PHOTOMETRICS LS1 LED SQ 4FT LTG1 3500K DELIVERED LUMENS: 2,691Lm TOTAL WATTS: 29W EFFICACY: 92 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG2 3500K DELIVERED LUMENS: 1,849Lm TOTAL WATTS: 20W EFFICACY: 94 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG3 3500K DELIVERED LUMENS: 3,082Lm TOTAL WATTS: 35W EFFICACY: 87 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/3

4 DATE PROJECT FIRM TYPE LS1 LED SQ Narrow, linear luminaire with square lens. For use in indoor applications where an LED luminaire with small profile providing continuous light is required. Suspended, surface or wall mount installation. FEATURES Available In Custom Lengths & Long Runs To 1/16 Accuracy Square Diffuser Damp Location Rated CRI 90+ Standard 5 Year, 50,000 Hour Fixture Warranty 2700K, 3000K, 3500K, 4000K & 5000K Color Temperatures Available Enlighted/Wattstopper Sensors Available APPLICATIONS Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors CONSTRUCTION Extruded Aluminum Housing, Steel End Caps, Formed Steel Gear Tray OPTICS Square, Extruded High Transmission Satin Acrylic Lens With No LED Imaging WARRANTY 5 Year Limited Warranty (Covers Standard Components) FINISH Standard Powder-Coated White. Custom RAL Colors Available FIXTURE RATINGS & CERTIFICATIONS Union Made ETL Listed Made In The USA Damp Location Rated ELECTRICAL Integral Driver With 0-10V 10% Dimming Standard. Several Driver Options Available. See Below For Lutron Dimming Information 2-Wire Forward Phase; Hi-Lume 1% Dimming, Only Available For 120V 3-Wire EcoSystem; Hi-lume 1% Dimming Digital EcoSystem; Hi-lume 1% Dimming, Soft-on Fade-to-black (Required for Daylighting) 5 Series EcoSystem; 5% Dimming LTEA L3DA LDE1 LDE5 EXTRUSION DIMENSIONS LED SYSTEM INFORMATION Standard (LTG1) Low (LTG2) Nominal System Watts 7.25 W/ft 5 W/ft Nominal Delivered Lumens 690 Lm/ft 475 Lm/ft Nominal Efficacy 95 Lm/W 95 Lm/W High (LTG3) 8.75 W/ft 795 Lm/ft 91 Lm/W Based on a 3500K luminaire using one driver. Please consult factory for custom lumen outputs & wattage. ORDERING FIXTURE ID LS1 LED SQ 2 - LENGTH 2-2 ft 4-4 ft 8-8 ft x -x - Custom (specify length) 3 - COLOR TEMP 4 - LED SYSTEM K/90 CRI LTG1 - Standard K/90 CRI LTG2 - Low K/90 CRI LTG3 - High K/90 CRI C - Custom Output K/90 CRI (ie-c550lm/ft) TW* - Tunable White RGBW* - RGB K *Must use DMX Driver (Remote) 5 - VOLTAGE UNV - Universal (120/277V) 6 - DRIVER DB - Standard 10% Dimming (0-10V) DB1% - 1% Dimming (0-10V) DB.01% -.01% Dimming (0-10V) LTEA* - Lutron 2-wire 1% Dimming L3DA* - Lutron 3-wire 1% Dimming LDE1* - Lutron Digital EcoSystem LDE5* - 5 Series EcoSystem; 5% Dimming *Refer to Electrical Information Above DMX - For Color Tuning and RGBW 7 - FINISH W - White (Standard) BLK - Black CC - Custom Color (provide RAL#) 8 - MOUNTING AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 9 - CONTROL EIS - Integral Sensor by Enlighted WIS - Integral Sensor by Wattstopper 10 - OPTICS SD - Standard Diffuser 11 - OPTIONS EM 120V - Emergency Pack EM 277V - Emergency Pack CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/3

5 DATE PROJECT FIRM TYPE LS1 LED SQ MOUNTING OPTIONS AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 1-5 Round Canopy (Standard White Finish) 2 - Canopy Retainer 3 - SJT Cord (Standard White) 4 - Air Craft Cable 5 - Gripper 1 - Threaded Rod (not supplied) CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/3

6 DATE PROJECT FIRM TYPE LS1 LED SQ PHOTOMETRICS LS1 LED SQ 4FT LTG1 3500K DELIVERED LUMENS: 2,691Lm TOTAL WATTS: 29W EFFICACY: 92 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG2 3500K DELIVERED LUMENS: 1,849Lm TOTAL WATTS: 20W EFFICACY: 94 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG3 3500K DELIVERED LUMENS: 3,082Lm TOTAL WATTS: 35W EFFICACY: 87 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/3

7 DATE PROJECT FIRM TYPE LS1 LED SQ Narrow, linear luminaire with square lens. For use in indoor applications where an LED luminaire with small profile providing continuous light is required. Suspended, surface or wall mount installation. FEATURES Available In Custom Lengths & Long Runs To 1/16 Accuracy Square Diffuser Damp Location Rated CRI 90+ Standard 5 Year, 50,000 Hour Fixture Warranty 2700K, 3000K, 3500K, 4000K & 5000K Color Temperatures Available Enlighted/Wattstopper Sensors Available APPLICATIONS Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors CONSTRUCTION Extruded Aluminum Housing, Steel End Caps, Formed Steel Gear Tray OPTICS Square, Extruded High Transmission Satin Acrylic Lens With No LED Imaging WARRANTY 5 Year Limited Warranty (Covers Standard Components) FINISH Standard Powder-Coated White. Custom RAL Colors Available FIXTURE RATINGS & CERTIFICATIONS Union Made ETL Listed Made In The USA Damp Location Rated ELECTRICAL Integral Driver With 0-10V 10% Dimming Standard. Several Driver Options Available. See Below For Lutron Dimming Information 2-Wire Forward Phase; Hi-Lume 1% Dimming, Only Available For 120V 3-Wire EcoSystem; Hi-lume 1% Dimming Digital EcoSystem; Hi-lume 1% Dimming, Soft-on Fade-to-black (Required for Daylighting) 5 Series EcoSystem; 5% Dimming LTEA L3DA LDE1 LDE5 EXTRUSION DIMENSIONS LED SYSTEM INFORMATION Standard (LTG1) Low (LTG2) Nominal System Watts 7.25 W/ft 5 W/ft Nominal Delivered Lumens 690 Lm/ft 475 Lm/ft Nominal Efficacy 95 Lm/W 95 Lm/W High (LTG3) 8.75 W/ft 795 Lm/ft 91 Lm/W Based on a 3500K luminaire using one driver. Please consult factory for custom lumen outputs & wattage. ORDERING FIXTURE ID LS1 LED SQ 2 - LENGTH 2-2 ft 4-4 ft 8-8 ft x -x - Custom (specify length) 3 - COLOR TEMP 4 - LED SYSTEM K/90 CRI LTG1 - Standard K/90 CRI LTG2 - Low K/90 CRI LTG3 - High K/90 CRI C - Custom Output K/90 CRI (ie-c550lm/ft) TW* - Tunable White RGBW* - RGB K *Must use DMX Driver (Remote) 5 - VOLTAGE UNV - Universal (120/277V) 6 - DRIVER DB - Standard 10% Dimming (0-10V) DB1% - 1% Dimming (0-10V) DB.01% -.01% Dimming (0-10V) LTEA* - Lutron 2-wire 1% Dimming L3DA* - Lutron 3-wire 1% Dimming LDE1* - Lutron Digital EcoSystem LDE5* - 5 Series EcoSystem; 5% Dimming *Refer to Electrical Information Above DMX - For Color Tuning and RGBW 7 - FINISH W - White (Standard) BLK - Black CC - Custom Color (provide RAL#) 8 - MOUNTING AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 9 - CONTROL EIS - Integral Sensor by Enlighted WIS - Integral Sensor by Wattstopper 10 - OPTICS SD - Standard Diffuser 11 - OPTIONS EM 120V - Emergency Pack EM 277V - Emergency Pack CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/3

8 DATE PROJECT FIRM TYPE LS1 LED SQ MOUNTING OPTIONS AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 1-5 Round Canopy (Standard White Finish) 2 - Canopy Retainer 3 - SJT Cord (Standard White) 4 - Air Craft Cable 5 - Gripper 1 - Threaded Rod (not supplied) CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/3

9 DATE PROJECT FIRM TYPE LS1 LED SQ PHOTOMETRICS LS1 LED SQ 4FT LTG1 3500K DELIVERED LUMENS: 2,691Lm TOTAL WATTS: 29W EFFICACY: 92 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG2 3500K DELIVERED LUMENS: 1,849Lm TOTAL WATTS: 20W EFFICACY: 94 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG3 3500K DELIVERED LUMENS: 3,082Lm TOTAL WATTS: 35W EFFICACY: 87 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/3

10 DATE PROJECT FIRM TYPE LS1 LED SQ Narrow, linear luminaire with square lens. For use in indoor applications where an LED luminaire with small profile providing continuous light is required. Suspended, surface or wall mount installation. FEATURES Available In Custom Lengths & Long Runs To 1/16 Accuracy Square Diffuser Damp Location Rated CRI 90+ Standard 5 Year, 50,000 Hour Fixture Warranty 2700K, 3000K, 3500K, 4000K & 5000K Color Temperatures Available Enlighted/Wattstopper Sensors Available APPLICATIONS Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors CONSTRUCTION Extruded Aluminum Housing, Steel End Caps, Formed Steel Gear Tray OPTICS Square, Extruded High Transmission Satin Acrylic Lens With No LED Imaging WARRANTY 5 Year Limited Warranty (Covers Standard Components) FINISH Standard Powder-Coated White. Custom RAL Colors Available FIXTURE RATINGS & CERTIFICATIONS Union Made ETL Listed Made In The USA Damp Location Rated ELECTRICAL Integral Driver With 0-10V 10% Dimming Standard. Several Driver Options Available. See Below For Lutron Dimming Information 2-Wire Forward Phase; Hi-Lume 1% Dimming, Only Available For 120V 3-Wire EcoSystem; Hi-lume 1% Dimming Digital EcoSystem; Hi-lume 1% Dimming, Soft-on Fade-to-black (Required for Daylighting) 5 Series EcoSystem; 5% Dimming LTEA L3DA LDE1 LDE5 EXTRUSION DIMENSIONS LED SYSTEM INFORMATION Standard (LTG1) Low (LTG2) Nominal System Watts 7.25 W/ft 5 W/ft Nominal Delivered Lumens 690 Lm/ft 475 Lm/ft Nominal Efficacy 95 Lm/W 95 Lm/W High (LTG3) 8.75 W/ft 795 Lm/ft 91 Lm/W Based on a 3500K luminaire using one driver. Please consult factory for custom lumen outputs & wattage. ORDERING FIXTURE ID LS1 LED SQ 2 - LENGTH 2-2 ft 4-4 ft 8-8 ft x -x - Custom (specify length) 3 - COLOR TEMP 4 - LED SYSTEM K/90 CRI LTG1 - Standard K/90 CRI LTG2 - Low K/90 CRI LTG3 - High K/90 CRI C - Custom Output K/90 CRI (ie-c550lm/ft) TW* - Tunable White RGBW* - RGB K *Must use DMX Driver (Remote) 5 - VOLTAGE UNV - Universal (120/277V) 6 - DRIVER DB - Standard 10% Dimming (0-10V) DB1% - 1% Dimming (0-10V) DB.01% -.01% Dimming (0-10V) LTEA* - Lutron 2-wire 1% Dimming L3DA* - Lutron 3-wire 1% Dimming LDE1* - Lutron Digital EcoSystem LDE5* - 5 Series EcoSystem; 5% Dimming *Refer to Electrical Information Above DMX - For Color Tuning and RGBW 7 - FINISH W - White (Standard) BLK - Black CC - Custom Color (provide RAL#) 8 - MOUNTING AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 9 - CONTROL EIS - Integral Sensor by Enlighted WIS - Integral Sensor by Wattstopper 10 - OPTICS SD - Standard Diffuser 11 - OPTIONS EM 120V - Emergency Pack EM 277V - Emergency Pack CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/3

11 DATE PROJECT FIRM TYPE LS1 LED SQ MOUNTING OPTIONS AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 1-5 Round Canopy (Standard White Finish) 2 - Canopy Retainer 3 - SJT Cord (Standard White) 4 - Air Craft Cable 5 - Gripper 1 - Threaded Rod (not supplied) CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/3

12 DATE PROJECT FIRM TYPE LS1 LED SQ PHOTOMETRICS LS1 LED SQ 4FT LTG1 3500K DELIVERED LUMENS: 2,691Lm TOTAL WATTS: 29W EFFICACY: 92 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG2 3500K DELIVERED LUMENS: 1,849Lm TOTAL WATTS: 20W EFFICACY: 94 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED SQ 4FT LTG3 3500K DELIVERED LUMENS: 3,082Lm TOTAL WATTS: 35W EFFICACY: 87 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/3

13 DATE PROJECT FIRM TYPE LS3 LED Linear, architectural luminaire. For use in indoor applications where an LED luminaire providing continuous light is required. Suspended, surface or wall mounted installation. For custom mounting consult factory. FEATURES Available In Custom Lengths & Long Runs To 1/16 Accuracy Corners & Patterns Available (See Page 2) Damp Location Rated CRI 90+ Standard 5 Year, 50,000 Hour Fixture Warranty 2700K, 3000K, 3500K, 4000K & 5000K Color Temperatures Available Enlighted/Wattstopper Sensors Available APPLICATIONS Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors CONSTRUCTION Extruded Aluminum Housing, Cast Steel End Caps, Formed Steel Gear Tray OPTICS Extruded High Transmission Satin Acrylic Lens With No LED Imaging. Additional Optics Available WARRANTY 5 Year Limited Warranty (Covers Standard Components) FINISH Standard Powder-Coated White. Custom RAL Colors Available FIXTURE RATINGS & CERTIFICATIONS Union Made ETL Listed Made In The USA Damp Location Rated ELECTRICAL Integral Driver With 0-10V 10% Dimming Standard. Several Driver Options Available. See Below For Lutron Dimming Information 2-Wire Forward Phase; Hi-Lume 1% Dimming, Only Available For 120V 3-Wire EcoSystem; Hi-lume 1% Dimming Digital EcoSystem; Hi-lume 1% Dimming, Soft-on Fade-to-black (Required for Daylighting) 5 Series EcoSystem; 5% Dimming LTEA L3DA LDE1 LDE5 EXTRUSION DIMENSIONS LED SYSTEM INFORMATION Nominal System Watts Nominal Delivered Lumens Nominal Efficacy 4.5 Standard (LTG1) Low (LTG2) 7.25 W/ft 5 W/ft 610 Lm/ft 420 Lm/ft 85 Lm/W 85 Lm/W High (LTG3) 8.75 W/ft 700 Lm/ft 80 Lm/W 3 Based on a 3500K luminaire using one driver. Please consult factory for custom lumen outputs & wattage. ORDERING FIXTURE ID LS3 LED 7 - FINISH W - White (Standard) BLK - Black CC - Custom Color (provide RAL#) 2 - LENGTH 2-2 ft 4-4 ft 8-8 ft x -x - Custom (specify length) **Patterns available, consult factory 8 - MOUNTING AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 3 - COLOR TEMP 4 - LED SYSTEM K/90 CRI LTG1 - Standard K/90 CRI LTG2 - Low K/90 CRI LTG3 - High K/90 CRI C - Custom Output K/90 CRI (ie-c550lm/ft) TW* - Tunable White RGBW* - RGB K *Must use DMX Driver (Remote) 9 - CONTROL EIS - Integral Sensor by Enlighted WIS - Integral Sensor by Wattstopper 5 - VOLTAGE UNV - Universal (120/277V) 10 - OPTICS SD - Standard Diffuser POL - 1 Drop Below Pop Out Lens BW - Batwing Optic ASYM - Asymmetric Optic 6 - DRIVER DB - Standard 10% Dimming (0-10V) DB1% - 1% Dimming (0-10V) DB.01% -.01% Dimming (0-10V) LTEA* - Lutron 2-wire 1% Dimming L3DA* - Lutron 3-wire 1% Dimming LDE1* - Lutron Digital EcoSystem LDE5* - 5 Series EcoSystem; 5% Dimming *Refer to Electrical Information Above DMX - For Color Tuning and RGBW 11 - OPTIONS WW - Wall Wash Reflector EM 120V - Emergency Pack EM 277V - Emergency Pack CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/3

14 DATE PROJECT FIRM TYPE LS3 LED MOUNTING OPTIONS AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 1-5 Round Canopy (Standard White Finish) 2 - Canopy Retainer 3 - SJT Cord (Standard White) 4 - Air Craft Cable 5 - Gripper 1 - Threaded Rod (not supplied) Wall Mount Bracket CORNERS & PATTERNS Available with illuminated corners, angles, and custom patterns. Must consult factory for custom corners and patterns. Square Patterns X Patterns T Patterns Custom Angles Custom Patterns LENS CUT OPTIONS Straight-cut Mitered Angle NOTE: Straight-Cut is standard configuration, Mitered Angle is optional and must be specified. CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/3

15 DATE PROJECT FIRM TYPE LS3 LED PHOTOMETRICS LS3 LED 4FT LTG1 3500K DELIVERED LUMENS: 2,440Lm TOTAL WATTS: 29W EFFICACY: 85 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS3 LED 4FT LTG2 3500K DELIVERED LUMENS: 1,687Lm TOTAL WATTS: 20W EFFICACY: 85 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS3 LED 4FT LTG3 3500K DELIVERED LUMENS: 2,796Lm TOTAL WATTS: 35W EFFICACY: 80 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/3

16 Catalog # : Project : Prepared By : Date : SFP22 Edge-lit LED Panel The ultra-thin, edge-lit LED panel (SFP22) series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high efficacy luminaire provides longlife and uniform illumination, as well as standard 0-10v dimming capability. Features & Specifications Optical System Laser etched PMMA Light Guide Plate for uniform lighting Smooth patterned impact-resistant white diffuse lens provides high visual comfort. Utilizes edge-lit technology, provides full diffusion with excellent uniformity. 120 beam angle provides high vertical illumination. Available in 5000K, 4000K and 3500K color temperatures. Minimum CRI of 80. Electrical High-performance driver features over-voltage, under voltage, shortcircuit and over temperature protection volt dimming (10% - 100%) standard. Standard Universal Voltage ( Vac) Input 50/60 Hz. L70 Calculated Life: >50k Hours Total harmonic distortion: <20% Operating temperature: -25 C to +45 C (-13 F to +113 F) Power factor: >.90 Input power stays constant over life. Optional 120v-277v integral emergency battery pack is available to meet critical life-safety lighting requirements. The 90-minute batteries provide constant power to the LED system, ensuring code compliance. A test switch/indicator button is installed in the housing for ease of maintenance. Consult factory for availability. Construction Rigid frame is die-formed code gauge steel and aluminum for consistency and strength. Mounting pan comes equipped with integral NEC compliant earthquake clips. Ultra-slim < 2 luminaire height and lightweight design effectively target a broad range of plenum/wall spaces and allow for easy installations. Dimensions 21-7/16 (545 mm) 23-3/4 (603 mm) 23-3/4 (603 mm) LSI Industries Inc Alliance Rd. Cincinnati, OH (513) LSI Industries Inc. All Rights Reserved.

17 SFP22 Edge-lit LED Panel Features & Specifications (Cont.) Luminaire is painted after fabrication following treatment with phosphate rust inhibitor. Finish coating of housing reflecting surfaces is with highreflectance white (minimum 92%) polyester powder. Shipping weight: 16.5 lbs in carton. Performance DELIVERED LUMENS Delivered Lumens 3500K 4000K 5000K LPW Delivered Lumens LPW Delivered Lumens LPW Wattage Installation Luminaire installs by lifting it through grid ceiling and resting it on the T-bars. Luminaire installs onto standard 15/16 and narrow 9/16 T-grid ceiling systems. An accessory flange kit is available for installing into drywall or plaster. Optional surface mount or suspended 4 point aircraft cable mount is available via accessory kits. 2, , , *LED Chips are frequently updated therefore values may increase. ELECTRICAL DATA 120V 208V 240V 277V 0.25A 0.14A 0.13A 0.11A *Electrical data at 25C (77F). Actual wattage may differ by +/-10%. Warranty LSI LED Fixtures carry a 5-year warranty. 1 Year warranty on optional Battery Back Up. Test regularly in accordance with local codes. Listing Listed to UL 1598 and UL RoHS Compliant. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. Lighting Facts Approved. Suitable For Damp Locations. IC Rated LSI Industries Inc Alliance Rd. Cincinnati, OH (513) LSI Industries Inc. All Rights Reserved. 02/19/18

18 SFP22 Edge-lit LED Panel Luminaire Ordering Guide TYPICAL ORDER EXAMPLE: SFP22 LED 30 UE DIM 40 U Family/Size LED Gen Lumen Package Voltage Driver Color Temperature Options Packaging SFP22 - (2x2) LED Lumens UE - Universal Voltage ( V) DIM - Dims to 10% (0-10v dimming) K K K EM - 10 Watt Emergency Battery Backup JB - Junctions Box Extender FC15D - 6 3/8 (5) #18 Leads (for use in dimming applications) Blank - None U - Single Pack JP - Job Pack Note: 1 - Consult factory for availability. Accessory Ordering Information (Accessories are field installed) Description Order Number Surface-Mount kit Frame Kits for Surface Mount Panels Item Part No. & Specification Part: SFPSMK22 Suspension-Mount kit Replacement Driver 30W For x panel surface mounted Dimension: x x 2.17 White color finished Flange Kit 2x2 FK22 Approved Dimming Controls Maximum of eight fixtures allowed per dimming circuit. Manufacturer Product Model Order Number LSI 0-10V Dimmer DS LSI Wall Switch Sensor with 0-10V Dimmer WS10-OS WHT Hanging Steel Wire for Panels Item Part No. & Specification Part: SFPACK4 1 set with 4pcs 1.5m steel wire, 4pcs wire lock, 4pcs plastic nails 4pcs screw Use for 2x2 square panel hanging installation LSI Industries Inc Alliance Rd. Cincinnati, OH (513) LSI Industries Inc. All Rights Reserved.

19 SFP22 Edge-lit LED Panel Photometry Luminaire photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM As specified by IESNA LM the entire luminaire is tested as the source resulting in a luminaire efficiency of 100%. See for detailed photometric data SFP ZONAL LUMEN SUMMARY ZONE LUMENS % OF LUMINAIRE LSI Industries Inc Alliance Rd. Cincinnati, OH (513) LSI Industries Inc. All Rights Reserved. 02/19/18

20 ILLUMINATING THE FUTURE...SINCE 1989 NC-431 / NC-436 / NC-438 4" Sapphire I High Lumen Reflectors Type Project Catalog No. Lamp/Wattage Source: 11W to 25W LED 850lm to 1250lm PRODUCT DESCRIPTION The Sapphire Series is an architectural grade LED high lumen downlight. The Sapphire Series features deep cone reflectors and dimmable LEDs. Cree LEDs and Drivers make for a solid, tested package. The reflectors have been designed for the high efficiency (LPW) while providing low aperture brightness. The Sapphire Series is proudly assembled in the USA. Cree TrueWhite technology with the highest performing commercially available LEDs and mixes in complementary light from red and unsaturated yellow LEDs to create beautiful, warm, white light. This patented approach enables precise color management to preserve reliable high color consistency over the life of the product. features Over 80% energy savings when compared to incandescent 4" deep cone reflectors, wall wash and deco glass 850lm, 1250lm and 2000lm LED packages 2700K, 3000K, 3500K and 90+ CRI Cree TrueWhite or Comfort Dim Technology 10-year limited warranty Energy Star certified culus Listed for Wet Locations Electrical Delivered Lumens / Wattage: L85 = 756lm / 11W; L12 = 1068lm / 16W; L20 = 1653lm / 25W Color Temperature: 2700K, 3000K, 3500K, 4000K CRI: 90+CRI Operating Temp.: 0 C to 45 C ambient temperature Comfort Dim: Comfort Dim color tunes the temperature from a bright 2700K, to a romantic and comfortable 1800K on a gradual, even curve. Comfort Dim is available in 2 different lumen levels: 850 and 1250 Lumens for lower ceiling heights in commercial and residential applications Lumens for light commercial and residential high ceiling applications Compatible Frame-ins Reflector is only compatible with respective Sapphire I series frames manufactured by Nora Lighting. Catalog No. Description NCAH-430 4" Universal New Construction Frame-In NCHR-434 4" Remodel Frame-In Specification Reflector: Deep cone self flanged reflector spun from high grade aluminum provides even illumination and visual comfort. The deep cone reflectors provide 55+ degree cut-off. NC-438 includes 3 studs mounted in the flange for attaching decorative glass. Decorative glass will reduce the amount of usable light by 10 to 30%, depending on the selected glass. Reflector Assembly: The reflector assembly includes the LED optical package and heat sink mounted on top. Reflector assembly easily wires to dedicated frame with lockable quick connect. Emergency: NC-431 is compatible with integral emergency test switch, must specify. Labels and listings culus Listed for Wet Location when used with compatible frame-in ENERGY STAR certified 10-Year Limited Warranty RoHS Compliant WET 10 YEAR LIMITED WARRANTY CRI COMMITTED TO GREEN RoHS COMPLIANT omfortdim Recreate the Sunset with LED PRODUCT Images NC-431 Open Reflector NC-436 Wall Wash Reflector NC-438 Deco Glass Reflector PRODUCT dimensions 4-1/8" 6" 5-1/2" 4" Sapphire I Reflectors - Dedicated Frame-In Required Reflector Type Lumens / Wattage Color Temp. Reflector / Flange Finish Emergency NC-431 = Open Reflector L85 = 850lm / 11W 27 = 2700K BSF = Black / Self Flanged EM = Integral emergency test switch 1 NC-436 = Wall Wash L12 = 1250lm / 16W 30 = 3000K BWSF = Black / White NC-438 = Deco Glass* L20 = 2000lm / 25W 35 = 3500K DSF = Clear Diffused / Self Flanged 40 = 4000K DWSF = Clear Diffused / White CD = Comfort Dim HSF = Haze / Self Flanged HWSF = Haze / White WSF = White / Self Flanged *Deco Glass Option NTG-4SPH-CF Tempered Clear Glass with Frosted Center NTG-4SPH-FC Tempered Blue Glass with Clear Center NTG-4SPH-HC Tempered Clear Glass with Frosted Center and 3-1/8'' Open Center 1 Compatible with NC-431 only, must specify on frame-in Example: NC-431L2030WSF = 4" Sapphire I Open Reflector, 2000lm / 25W LED, 3000K, White / Self Flange Finish 6505 Gayhart St., Commerce, CA Phone: nora@noralighting.com Specifications subject to change without notice P1

21 ILLUMINATING THE FUTURE...SINCE 1989 NCAH-430 / NCHR-434 4" Sapphire I High Lumen Frame-Ins Type Project Catalog No. Lamp/Wattage Source: 11W to 25W LED 850lm to 1250lm PRODUCT DESCRIPTION Architectural grade LED High Lumen Downlights featuring deep cone reflectors. Dimmable Cree LEDs and Cree LED drivers make for a solid, complete and tested package. The Sapphire series is available in 4", 6" or 8" apertures and also in new construction or remodel frame-ins. construction Plaster Frame: Architectural quality galvanized steel ring riveted to steel junction box and driver tray. Plaster frame opening includes (3) "butterfly" spring clips to hold reflector assembly in place. Universal: Frame-in includes two adjustable bar hangers and universal brackets that accept flat bar hangers, C-Channel (ordered separately) or rigid 1/2" conduit. Adjustable hanger bars with captive nails, alignment foot, T-Bar slot are included on frame. Remodel: Designed for installation in existing ceilings. Three high tension tempered steel springs secure remodel housings evenly to the ceiling; hole cutout template provided for convenience. Minimum Clearances: Frames require a minimum of 3" from thermal insulation and 1/2" from adjacent building component. Junction Box: Plaster frame integrated 29 cubic inch 0.064" thick galvanized steel, with seven 1/2" knockouts, four pryouts, and snap on cover. Electrical connections are made through a single junction box door. Green wire provided for installations with ground wire fed through PVC pipe conduit. Junction box connects to reflector assembly with lockable quick connect. Thermal Protector: External thermal device is located on the junction box. Driver: Isolated driver separates the primary side from the secondary side. Electrical Input Voltage: 120V or 277V Operating Temp.: 0 C to 45 C ambient temperature Delivered Lumens / Wattage: L85 = 756lm / 11W L12 = 1068lm / 16W L20 = 1653lm / 25W Dimming: Triac, ELV or 0-10V dimming Comfort Dim: Available in 850lm-2000lm (Note: 2000lm Comfort Dim drivers are labeled for 42W) Click Here or check complete dimmer list at in the "Compatibility" page under "Resources" tab Reflectors: Ordered separately. See NC-43 specification sheet for available reflector styles and finishes. Emergency LED Driver (BSL17C-C2) Up to 7.5W emergency illumination with LEDs. Illumination Time: 90min Voltage: 120/277 VAC, 60Hz Output Voltage: VDC Available with remote or integral test switch, must specify Labels and listings culus Listed for Wet Location ENERGY STAR certified 10-Year Limited Warranty RoHS Compliant WET 10 YEAR LIMITED WARRANTY CRI COMMITTED TO GREEN RoHS COMPLIANT omfortdim Recreate the Sunset with LED PRODUCT Images and dimensions NCAH-430 Universal Frame-In 12-3/4" NCAH-434 Remodel Frame-In 8" 5-1/2" max with reflector 6" max with reflector 5-3/8" 10-1/2" 4" Sapphire I High Lumen Frame-Ins - Compatible with Sapphire I Reflectors Frame Type Lumens / Wattage LED Module Driver Emergency NCAH-430/ - Universal New Construction NCHR-434/ - Remodel 85 = 850lm / 11W 12 = 1250lm / 16W 20 = 2000lm / 25W (blank) = Cree TrueWhite C = Comfort Dim LE1 = 120V Input; Triac/ELV/0-10V dimming 1 LE2 = 277V Input; 0-10V dimming 1 LE4 = 120V Input; Triac/ELV/0-10V dimming 1 EM - Emergency Pack w/ Remote Test Switch EMI - Emergency Pack w/ Integral Test Switch, must specify on reflector 1 LE1-120V Triac/ELV dimming for lm; 0-10V Dim for 2000lm (Note: when used with 850lm-1250lm Comfort Dim, only use ELV dimmers) LE2-277V 0-10V dimming LE4-120V Triac/ELV dimming for 2000lm; 0-10V dimming for lm Example: NCAH-430/12LE1EM = 4" Sapphire I Universal LED New Construction Frame-In, 1250lm / 16W, 120V Input, Emergency with Remote Test Switch 6505 Gayhart St., Commerce, CA Phone: nora@noralighting.com Specifications subject to change without notice P2

22 ILLUMINATING THE FUTURE...SINCE 1989 PHOTOMETRICS 4" Sapphire I Series Type Project Catalog No. Lamp/Wattage Test Information Test Number: Part Number: NC-431L8540WSF Lumens: 756lm Wattage: 12.5W Efficacy: 61lpw CCT / CRI: 4000K / 90 CRI Spacing Criteria (0º-180): 1.0 Spacing Criteria (90º-270): Polar Curve 70º 50º Illuminance at a Distance Distance from Luminaire FC at Nadir Beam Diameter 4' 37.3fc 5'-1" 6' 16.6fc 7'-7" 8' 9.3fc 10'-1" 10' 6fc 12'-8" Zonal Lumen Summary Zone Lumens % Luminaire Candela Table Vertical Angles Candela ' 4.1fc 15'-2" º 30º Test Information Test Number: Part Number: NC-431L1240WSF Lumens: 1068lm Wattage: 16.6W Efficacy: 64lpw CCT / CRI: 4000K / 90 CRI Spacing Criteria (0º-180): 1.10 Spacing Criteria (90º-270): Polar Curve 70º 50º Illuminance at a Distance Distance from Luminaire FC at Nadir Beam Diameter 4' 52.6fc 5'-1" 6' 23.4fc 7'-7" 8' 13.2fc 10'-1" 10' 8.4fc 12'-8" Zonal Lumen Summary Zone Lumens % Luminaire Candela Table Vertical Angles Candela ' 5.9fc 15'-2" º 30º Test Information Test Number: Part Number: NC-431L2040WSF Lumens: 1653lm Wattage: 25.1W Efficacy: 66lpw CCT / CRI: 4000K / 90 CRI Spacing Criteria (0º-180): 1.0 Spacing Criteria (90º-270): Polar Curve 70º 50º Illuminance at a Distance Distance from Luminaire FC at Nadir Beam Diameter 4' 81.5fc 5'-1" 6' 36.2fc 7'-7" 8' 20.4fc 10'-1" 10' 13fc 12'-8" Zonal Lumen Summary Zone Lumens % Luminaire Candela Table Vertical Angles Candela ' 9.1fc 15'-2" º 30º 6505 Gayhart St., Commerce, CA Phone: nora@noralighting.com Specifications subject to change without notice P3

23 NYLS-6 Cylinder LED High Performance ILLUMINATING THE FUTURE...SINCE 1989 PRODUCT DESCRIPTION 6" Cylindrical surface or pendant mounted LED fixture. Deep set optics in a reflector cone for optimal visual comfort. Uses Cree LED platform with a dedicated heat sink driven by a Cree supported outboard driver for cool operation and extended life. True white technology and 90+ CRI provide excellent color rendition for the life of the product. DIMENSIONS Type Project Catalog No. Lamp/Wattage Source: 850 to 4000 Lumens FEATURES Internal thermal protection 850 / 1250 / 2000 / 3000 / 4000 Lumens 2700K / 3000K / 3500K / 4000K Comfort Dim Option: 850L, 1250L, 2000L, 3000L 90+ CRI Ceramic LED package Cree True White Technology Dimmable (Consult factory on dimming 2000 to 4000 lumen) 5 Year Limited Warranty culus listed for damp location culus listed for wet location - Wall Mount Only 50,000 Hr Life Expectancy 14-1/2 8' max CONSTRUCTION Cylinder Cap High quality steel cap with universal slots to allow for direct mounting into J-Box for surface mount. Incorporates all thread in the center for the installation of a cable or pendant rod kit for the corresponding mounting method. Three screws on the bottom of cap secure cylinder body to cylinder cap. (Adjustable with flathead screw drive) Cylinder Body steel cylindrical body with three keyhole slots allowing body to be installed to cylinder cap. Spring brackets accept torsion wing trim springs. Four butterfly clips also accommodated for spring-less trims. MOUNTING OPTIONS 5-3/4 7-5/8 4-5/8 Mounting: Cable mount come with canopy, field cuttable 3 wire cable and cylinder. Rod mount comes with canopy and rod consisting of 3-12" pieces and 2-24" pieces of internally threaded rod and cylinder. Surface mount and wall mount come with hardware to mount directly to J-box. Socket Quick Connector: Socket is free floating and installs to eyeball, gimbal ring and new trims equipped with socket brackets. Protective cap included to protect socket interior during ceiling painting. ELECTRICAL Driver (Seperate and Dedicated) 850 Lumen Watts (CD-Comfort Dim requires ELV Triac Dimmer) 1250 Lumen Watts (CD-Comfort Dim requires ELV Triac Dimmer) 2000 Lumen Watts 3000 Lumens Watts 4000 Lumens Watts Labels and Listings culus Listed for Damp Location culus listed for wet location - Wall Mount Only FAMILY SIZE MOUNTING LAMP SOURCE TYPE OF TRIM COLOR TEMP TRIM COLOR CYLINDER COLOR DIM OPTION CABLE NYLS 6 C = Cable P = Pendant Rod** S = Surface W = Wall 8 = 850lm 1 = 1250lm 2 = 2000lm 3 = 3000lm 4 = 4000lm 5 YEAR LIMITE D WARRANTY ASSEMBLED IN US A 1 = Reflector 8 = Reflector w/ Deco. Glass 27=2700K 30=3000K 35=3500K 40=4000K CD=Comfort **0-10V dimming requires an offset nylon sleeve with 2 wires (gray & purple) that runs parallel to rod. Dim* Surface Mount Rod Mount WW = White/White Flange DW = Diffused Clear/White Flange HW = Haze/White Flange DB = Diffused Clear/Black Flange HB = Haze/Black Flange Cable Mount* B = Black W = White Wall Mount See Table AC = For Cable Mount only. Denotes new Aircraft cable and 5-wire cord Gayhart St., Commerce, CA Phone: FAX: nora@noralighting.com Specifications subject to change without notice max 8 max *Cable Mount includes a cylinder cap with aircraft cable in the center & an offset nylon sleeve which contains a 5-wire (Black, White, Green, Grey, Purle) configuration for the dimming DIMMING CODES AND OPTIONS LUMEN 1 = Std Dim 2 =277V 4 = Universal V Triac 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Triac 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Non-Dim 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Non-Dim 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Non-Dim 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V Example : NYLS-6C2135DWW4AC - 6" Aircraft Cable and Cord Cylinder - White with Diffused Clear Reflector, 2000L, 35k, 120V Triac or 0-10V/ 277V 0-10V Dimming. 3-3/4 5-1/2

24 NYLS-6 Cylinder LED High Performance ILLUMINATING THE FUTURE...SINCE 1989 PRODUCT DESCRIPTION 6" Cylindrical surface or pendant mounted LED fixture. Deep set optics in a reflector cone for optimal visual comfort. Uses Cree LED platform with a dedicated heat sink driven by a Cree supported outboard driver for cool operation and extended life. True white technology and 90+ CRI provide excellent color rendition for the life of the product. DIMENSIONS Type Project Catalog No. Lamp/Wattage Source: 850 to 4000 Lumens FEATURES Internal thermal protection 850 / 1250 / 2000 / 3000 / 4000 Lumens 2700K / 3000K / 3500K / 4000K Comfort Dim Option: 850L, 1250L, 2000L, 3000L 90+ CRI Ceramic LED package Cree True White Technology Dimmable (Consult factory on dimming 2000 to 4000 lumen) 5 Year Limited Warranty culus listed for damp location culus listed for wet location - Wall Mount Only 50,000 Hr Life Expectancy 14-1/2 8' max CONSTRUCTION Cylinder Cap High quality steel cap with universal slots to allow for direct mounting into J-Box for surface mount. Incorporates all thread in the center for the installation of a cable or pendant rod kit for the corresponding mounting method. Three screws on the bottom of cap secure cylinder body to cylinder cap. (Adjustable with flathead screw drive) Cylinder Body steel cylindrical body with three keyhole slots allowing body to be installed to cylinder cap. Spring brackets accept torsion wing trim springs. Four butterfly clips also accommodated for spring-less trims. MOUNTING OPTIONS 5-3/4 7-5/8 4-5/8 Mounting: Cable mount come with canopy, field cuttable 3 wire cable and cylinder. Rod mount comes with canopy and rod consisting of 3-12" pieces and 2-24" pieces of internally threaded rod and cylinder. Surface mount and wall mount come with hardware to mount directly to J-box. Socket Quick Connector: Socket is free floating and installs to eyeball, gimbal ring and new trims equipped with socket brackets. Protective cap included to protect socket interior during ceiling painting. ELECTRICAL Driver (Seperate and Dedicated) 850 Lumen Watts (CD-Comfort Dim requires ELV Triac Dimmer) 1250 Lumen Watts (CD-Comfort Dim requires ELV Triac Dimmer) 2000 Lumen Watts 3000 Lumens Watts 4000 Lumens Watts Labels and Listings culus Listed for Damp Location culus listed for wet location - Wall Mount Only FAMILY SIZE MOUNTING LAMP SOURCE TYPE OF TRIM COLOR TEMP TRIM COLOR CYLINDER COLOR DIM OPTION CABLE NYLS 6 C = Cable P = Pendant Rod** S = Surface W = Wall 8 = 850lm 1 = 1250lm 2 = 2000lm 3 = 3000lm 4 = 4000lm 5 YEAR LIMITE D WARRANTY ASSEMBLED IN US A 1 = Reflector 8 = Reflector w/ Deco. Glass 27=2700K 30=3000K 35=3500K 40=4000K CD=Comfort **0-10V dimming requires an offset nylon sleeve with 2 wires (gray & purple) that runs parallel to rod. Dim* Surface Mount Rod Mount WW = White/White Flange DW = Diffused Clear/White Flange HW = Haze/White Flange DB = Diffused Clear/Black Flange HB = Haze/Black Flange Cable Mount* B = Black W = White Wall Mount See Table AC = For Cable Mount only. Denotes new Aircraft cable and 5-wire cord Gayhart St., Commerce, CA Phone: FAX: nora@noralighting.com Specifications subject to change without notice max 8 max *Cable Mount includes a cylinder cap with aircraft cable in the center & an offset nylon sleeve which contains a 5-wire (Black, White, Green, Grey, Purle) configuration for the dimming DIMMING CODES AND OPTIONS LUMEN 1 = Std Dim 2 =277V 4 = Universal V Triac 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Triac 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Non-Dim 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Non-Dim 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V V Non-Dim 277V Non-Dim 120V Triac or 0-10V / 277V 0-10V Example : NYLS-6C2135DWW4AC - 6" Aircraft Cable and Cord Cylinder - White with Diffused Clear Reflector, 2000L, 35k, 120V Triac or 0-10V/ 277V 0-10V Dimming. 3-3/4 5-1/2

25 INNOVATIVE SITE LIGHTING Specifications GUP120 Project: Fixture Type: Quantity: Customer: Specifications 10 1/2" 6" Material: Cast Aluminum Hub and Wall Canopy Electrical: Medium Base Socket, 200w Max and 120v Only Certifications: UL listed for dry locations. Finish: A polyester powder coat high quality finish is electro-statically applied and baked at 430 for exceptional durability and color retention. Products undergo an intensive five-step cleansing and pretreatment process for maximum paint adhesion. Marine grade finish provides superior salt, humidity and UV protection. This coating withstands up to 3000 hours of continuous salt spray, comes with a 5-year warranty and is available in either a textured or gloss surface. Modifications: Consult factory for custom or modified luminaires. Catalog Logic GUP120 Max 200w Incandescent Wire Lamp Weight: 2 lbs GUP120 RLM Style E31UE10 Mounting 47 Finish Catalog Number 1 2 GUP120 1 MOUNTING Arm Mounts E31UE10 (10 arm projection) E31UE12 (12 arm projection) E31UE16 (16 arm projection) E33UE14 (14 arm projection) E33UE18 (18 arm projection) E33UE22 (22 arm projection) E35UE10 (10 arm projection) E35UE12 (12 arm projection) Cord Mounts BLC-UE (8 black cord, UE cast hub & 5 1/4 x 2 3/4 canopy) WHC-UE (8 white cord, UE cast hub & 5 1/4 x 2 3/4 canopy) 2 Standard Grade Marine Grade FINISHES Standard Grade Marine Grade 40 NA Raw Unfinished Copper Clay Black Silver Forest Green Black Verde Bright Red Painted Chrome White Painted Copper Bright Blue Textured Black Sunny Yellow Matte Black Aqua Green Architectural Textured Bronze 49 NA Galvanized Textured White Navy Textured Silver Architectural Bronze Aspen Green Patina Verde Cantaloupe Lilac Putty Premium Grade Marine Grade Extreme Chrome Textured Desert Stone Butterscotch Caramel Black Silver Premium Grade Marine Grade Candy Apple Red Cobalt Blue Graystone Gunmetal Gray Oil Rubbed Bronze Consult factory for additional paint charges and availability 2016 ANP Lighting. All rights reserved. These specifications are intended for general purposes only. ANP reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products ANPlighting.com

26 INNOVATIVE SITE LIGHTING Specifications GUP120 Project: Fixture Type: Customer: Quantity: PENDANT MOUNTS 109 3/8" 6" GUP120-BLCUE ARM MOUNTS XX = Arm Projection XX = Arm Projection XX = Arm Projection XX = Arm Projection 16 1/4" 14 7/8" 13 1/8" 6" GUP120-E31UEXX GUP120-E33UEXX GUP120-E35UEXX 6 6" 2016 ANP Lighting. All rights reserved. These specifications are intended for general purposes only. ANP reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products ANPlighting.com

27 INNOVATIVE SITE LIGHTING Specifications GUP120 Project: Fixture Type: Customer: Quantity: Specifications 10 1/2" 6" Material: Cast Aluminum Hub and Wall Canopy Electrical: 12-watt LED module is only available. Triac dimming, narrow distribution and 120v only. Certifications: UL listed for dry locations. Finish: A polyester powder coat high quality finish is electro-statically applied and baked at 430 for exceptional durability and color retention. Products undergo an intensive five-step cleansing and pretreatment process for maximum paint adhesion. Marine grade finish provides superior salt, humidity and UV protection. This coating withstands up to 3000 hours of continuous salt spray, comes with a 5-year warranty and is available in either a textured or gloss surface. Modifications: Consult factory for custom or modified luminaires. GUP120 LED Wire Lamp Weight: 3 lbs Catalog Logic GUP120 M012LD D N 40K E31UE10 11 RLM Style Light Source/Wattage Dimming Distribution CCT Mounting Finish Catalog Number GUP120 1 GU24 M012LD 2 D NA 3 N LIGHT SOURCE & WATTAGES (GU24 Socket Only) (12w Cree module) Integral driver, 120V, dimming & narrow distribution only. DIMMING (Dimming, Triac Only) (GU24 Socket) DISTRIBUTION (T5 Narrow Distribution with Flat LED Lens) NA (GU24 Socket) 4 27K 30K 35K 40K COLOR TEMPERATURE (CCT) (2700K) (3000K) (3500K) (4000K) 5 MOUNTING Arm Mounts E31UE10 (10 arm projection) E31UE12 (12 arm projection) E31UE16 (16 arm projection) E33UE14 (14 arm projection) E33UE18 (18 arm projection) E33UE22 (22 arm projection) E35UE10 (10 arm projection) E35UE12 (12 arm projection) Cord Mounts BLC-UE (8 black cord, UE cast hub & 5 1/4 x 2 3/4 canopy) WHC-UE (8 white cord, UE cast hub & 5 1/4 x 2 3/4 canopy) 6 Standard Grade Marine Grade FINISHES Standard Grade Marine Grade 40 NA Raw Unfinished Copper Clay Black Silver Forest Green Black Verde Bright Red Painted Chrome White Painted Copper Bright Blue Textured Black Sunny Yellow Matte Black Aqua Green Architectural Textured Bronze 49 NA Galvanized Textured White Navy Textured Silver Architectural Bronze Aspen Green Patina Verde Cantaloupe Lilac Putty Premium Grade Marine Grade Extreme Chrome Textured Desert Stone Butterscotch Caramel Black Silver Premium Grade Marine Grade Candy Apple Red Cobalt Blue Graystone Gunmetal Gray Oil Rubbed Bronze Consult factory for additional paint charges and availability 2016 ANP Lighting. All rights reserved. These specifications are intended for general purposes only. ANP reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products ANPlighting.com

28 INNOVATIVE SITE LIGHTING Specifications GUP120 LED MODULE LED Wattage CCT Lumens System Wattage Efficacy 12w 2700K w 65 12w 3000K w 65 Project: Fixture Type: Customer: Quantity: 12w 3500K w 65 12w 4000K w 65 WARRANTY See for complete fixture warranty. LED warranty information 5 year limited warranty* *Limited Warranty: A typical year is defined as 4380 hours of operation. MODULE LISTINGS Fully compliant with the RoHS Directive Certifications: CE/UL MODULE/DRIVER SPECIFICATION: Efficacy is 65 lumens per watt Triac Dimming to 5% Life: L70 is 35,000 hours CCT: 2700K, 3000K, 3500K and 4000K CRI: > Volts PENDANT MOUNTS 109 3/8" 6" GUP120-BLCUE ARM MOUNTS XX = Arm Projection XX = Arm Projection XX = Arm Projection XX = Arm Projection 16 1/4" 14 7/8" 13 1/8" 6" GUP120-E31UEXX GUP120-E33UEXX GUP120-E35UEXX 6 6" 2016 ANP Lighting. All rights reserved. These specifications are intended for general purposes only. ANP reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products ANPlighting.com

29 NOVA FLEX FLEXIBLE LED SOLUTIONS PRO lumens per foot Nova Flex Pro 120 is for task lighting applications like under cabinets and closets. Job Name: Type: DIMMABLE 50,000+ HOURS IP65 COLOR / SKU LUMENS / FT (DELIVERED) EFFICACY CRI Rf Rg NF-PRO-O-120-[12V/24V]-2700K NF-PRO-O-120-[12V/24V]-3000K NF-PRO-O-120-[12V/24V]-3225K NF-PRO-O-120-[12V/24V]-4100K NF-PRO-O-120-[12V/24V]-5500K PHYSICAL Operating Temp -15ºF to 140ºF Class II Maximum Length (ft) Cut Length (in) Environment IP Rating Mounting Dimensions (in) 12V: 16 24V: 32 12V: 1 24V: 2 Dry Damp Wet IP65 3M Adhesive Clips Channels 0.4 W * 0.14 H ELECTRICAL Input Voltage 12V, 24V DC Power Consumption 3.0 watts / ft LEDs / Meter 120 Lamp Life 50,000+ hours Wire Size 20 AWG, 2 wire MLV Dimming ELV 0-10V Certifications UL Listed ETL Listed Warranty 2 years Actual size PRO SERIES / page 1 novaflexled.com /

30 PRODUCT ID: Indoor LED Backlit Sign MODEL SBLF811W-A077R DIMENSIONS 8" H x 11" W x 2.25" D (est lbs) CLASS Class: SBLF Series Control Method: Switch (not included) or external relay. CONSTRUCTION Cabinet: 1-piece, corrosion resistant, extruded aluminum frame, 2.25" deep. Face Material: 1/8" thick, white white acrylic (7328) Faces: Single Faced Sign Finish: Duranodic Bronze ELECTRICAL Flashing: Not Included Input Voltage: VAC UL/cUL Listed: Listed MESSAGE Font: Swiss 721 Bold BT Illumination: Backlit with white LEDs. Message always visible. Sign Messages: See message table below Vinyl Color: Red translucent vinyl (6621) Product View NOTE: Sign image may not exactly represent the finished product. For illustration purposes only. 8 in MESSAGE LED/COLOR HEIGHT AMPS ON AIR Red 2.5" in 2 1 /4 in NOTE: Above messages are independently controlled. Directional Systems 2250 West 23rd St Erie, PA Phone: (877) Fax: (877) sales@directionalsystems.com Website: Proudly Made in the USA Copyright (C) 2018 Directional Systems REV KAM

31 13450 Monte Vista Avenue Chino, California Telephone: (909) Toll Free: (800) Fax: (909) JOB NAME: SCALE: DRAWN BY: SHEET: DATE: N.T.S. 04/10/2018 S.M.-W HiLite Mfg QTY: Proprietary Drawing TYPE: REV: HiLite Mfg HiLite Mfg Proprietary Drawing Proprietary Drawing ±6 1/4" 5" HiLite Mfg Proprietary Drawing 5 1/2" 3/4" HiLite Mfg ±7 15/16" Proprietary Drawing 2 3/8" 1 11/16" HiLite Mfg Proprietary Drawing Item Number H-LC-25/M-6-25/BM-1-25/40W INC Wattage 40W Voltage 120V Finish 25-Satin Brass (Fixture, Arm & Canopy) Mounting Wall Mount Lamp/Socket 1-Medium Base INC ***Confidential and Proprietary. The information contained on this page is the sole property of Hi-Lite Mfg. Co., Inc. Any reproduction, redistribution, or use to profit from in part or as a whole without prior written authorization of Hi-Lite Mfg. Co., Inc. is unlawful, against trade laws and will be prosecuted to the fullest extent.

32 13450 Monte Vista Avenue Chino, California Telephone: (909) Toll Free: (800) Fax: (909) JOB NAME: SCALE: DRAWN BY: SHEET: DATE: N.T.S. 04/10/2018 S.M.-W HiLite Mfg QTY: Proprietary Drawing TYPE: REV: HiLite Mfg HiLite Mfg Proprietary Drawing 18" Proprietary Drawing 4 3/4" HiLite Mfg Proprietary Drawing HiLite Mfg HI-LITE Proprietary Drawing 3 1/2" HiLite Mfg HI- LIT E MFG 6" WHITE CORD ±14" C HINO C A Proprietary Drawing MOUNTING PLATE HiLite Mfg Proprietary Drawing ±5 1/2" 12" HiLite Mfg Proprietary Drawing Item Number H /SP-B " ARM PROJ./CW6"/INC Wattage 100W Voltage 120V Finish 25-Satin Brass (Cap) 93-White (Interior/Exterior of Fixture & Arm) Mounting Wall Mount W/ White 6" Cord Lamp/Socket 1-Medium Base INC ***Confidential and Proprietary. The information contained on this page is the sole property of Hi-Lite Mfg. Co., Inc. Any reproduction, redistribution, or use to profit from in part or as a whole without prior written authorization of Hi-Lite Mfg. Co., Inc. is unlawful, against trade laws and will be prosecuted to the fullest extent.

33 13450 Monte Vista Avenue Chino, California Telephone: (909) Toll Free: (800) Fax: (909) JOB NAME: SCALE: DRAWN BY: SHEET: DATE: N.T.S. 04/10/2018 S.M.-W HiLite Mfg QTY: Proprietary Drawing TYPE: REV: HiLite Mfg Proprietary Drawing HiLite Mfg Proprietary Drawing 14" HiLite Mfg Proprietary Drawing 4" 12" 6"-7" HiLite Mfg Proprietary Drawing 1 11/16" HiLite Mfg Proprietary Drawing 2 3/8" ±6 3/8" HiLite Mfg Proprietary Drawing Item Number H-LC-97/SP-ARM-97-1/4" IPS-14" ARM PROJ./40W INC Wattage 40W Voltage 120V Finish Mounting Lamp/Socket 97-Red (Cup & Arm) Wall Mount 1-Medium Base INC ***Confidential and Proprietary. The information contained on this page is the sole property of Hi-Lite Mfg. Co., Inc. Any reproduction, redistribution, or use to profit from in part or as a whole without prior written authorization of Hi-Lite Mfg. Co., Inc. is unlawful, against trade laws and will be prosecuted to the fullest extent.

34 SPECIFICATIONS: DESCRIPTION Cord-hung or stem-mount pendant with handcrafted glass diffuser. bana 120V pendants LAMPING Standard: 60W T10 Medium-based 120V, lamp not included. Dimmable with standard incandescent dimmer (not included). Edison: 40W Edison Filament Medium-based, 120V, lamp included. LED Edison: 5W Replaceable S-Style LED Filament lamp, 120V, dimmable, 2700 K CCT, 540 lumens, 15,000 hours, lamp included. DIFFUSER Shade shall be handcrafted glass of various decors Dia. x 5.25 H SUSPENSION Cord-hung: 10 SVT-type cord, complete with 5 decorative sleeve at the socketholder. Jacket coordinates with metal finish. Plated stamped steel construction. Bronze or Satin Nickel. See next page for mulit light options. Stem-mount: 4 connectable stem sections (3, 6, 12 and 18 lengths) plus telescoping piece for up to 3 adjustment, 10 max. 5 Dia. canopy (with swivel) and stem sections are plated steel. Bronze or Satin Nickel. MOUNTING Installs directly to a 4 octagonal ceiling box. Suitable for sloped ceilings. LABELS UL or ETL Listed. Suitable for Damp Locations (interior use only). Consult factory concerning lower wattage labeling for energy requirements. Bana Shown in Clear (BanaCL) with Edison Lamp BanaAm Amber BanaFR Frost BanaSm Smoke Project Information: For ordering information, see next page All dimensions provided are nominal. Allowance must be made for dimensional tolerance in handcrafted glasses. REV 1/17 Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

35 bana 120V pendants ORDERING: Connection - SHADE OPTIONS - Lamp Options - Metal Finish - Options Cord Fixture BANAAM Amber (blank) 60W T10 Incan BR Bronze L 15 cord 1JC 1 Lt. Dome BANACL Clear EDI 40W Edison SN Satin Nickel LW Low wattage 1JT 1 Lt. Flat BANAFR Frost EDIL 5W LED Filament labeling BANASM Smoke Stem Fixture 1TT 1 Lt. Flat Multi light J For Multi light Canopy Ex. 1JT-BANACL-SN Bana Pendant w/ Clear Glass, Satin Nickel Finish MULTIPORT CANOPY OPTIONS: T33X 3 Light ROUND Canopy 8 10 Dia. shades MAX, with T33XL 3 Light Large ROUND Canopy Dia. shades MAX, with Multi light available See options to right T36X 6 Light ROUND Canopy Dia. shades MAX, with T39X 9 Light ROUND Canopy PENDANT OPTIONS: Dia. shades MAX, with 1Jt / 1jc / j Monopoint Pendant Canopy tt stem PENDANT std 10 max ACCESSORIES: 2.5 Flat (1JT) or Dome (1JC) Canopy styles. Dome style allows adjustment without cutting cord. J option is pendant less canopy for multiport canopy (options to the right) Cord: 10 SVT, 5 sleeve at socketholder (V Series utilizes SJT-type) Swivel at canopy, suitable for sloped ceilings Includes telescoping section plus 4 connectable stem sections, (1x 3, 1x 6, 1x 12, 1x 18 ), 10 max T33V 3 Light Bar Canopy T34V 4 Light Bar Canopy 43 T37V 7 Light Bar Canopy Dia. shades MAX, with 20 Dia. shades MAX, with 14 Dia. shades MAX, with ADDITIONAL STEM SECTIONS: Additional connecting stems are available to increase overall length, up to 10 max. Telescoping adjustable section allows up to 3 movement. T20A-SN or T20A-BR Adj. Section T203-SN or T203-BR 3 Section T206-SN or T206-BR 6 Section T212-SN or T212-BR 12 Section T218-SN or T218-BR 18 Section LONGER CORD LENGTHS: Longer cord length of 15 available. Add an L to the end of the item number, i.e. 1JC SNL. LOW WATTAGE LABELING: Incandescent fixture supplied with 16 watt relamp label. Add an LW to the end of the item number, i.e. 1JC SN-LW. CORD SLEEVES: If concealing the cord is desired, order our 0.25 dia. metal sleeves. Each sleeve is 18 long and may be field cut. T118-SN Satin Nickel T118-BR Bronze STEMHOOKS: Suspension hooks allow cord drops to be placed wherever desired. Suitable for sloped ceilings. T103BR Bronze T103SN Satin Nickel How to order a Multilight fixture Order your canopy with the selected 120V multi light pendants (indicated by B or J prefix) for the complete fixture: Example: 1x T33X-SN (3 Light Round Canopy) 1x J-BANAAM-SN (Bana Pendant in Amber) 1x J-BANACL-SN (Bana Pendant in Clear) 1x J-BANASM-SN (Bana Pendant in Smoke) Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

36 SPECIFICATIONS: DESCRIPTION Cord-hung or stem-mount pendant with handcrafted glass diffuser. bana 120V pendants LAMPING Standard: 60W T10 Medium-based 120V, lamp not included. Dimmable with standard incandescent dimmer (not included). Edison: 40W Edison Filament Medium-based, 120V, lamp included. LED Edison: 5W Replaceable S-Style LED Filament lamp, 120V, dimmable, 2700 K CCT, 540 lumens, 15,000 hours, lamp included. DIFFUSER Shade shall be handcrafted glass of various decors Dia. x 5.25 H SUSPENSION Cord-hung: 10 SVT-type cord, complete with 5 decorative sleeve at the socketholder. Jacket coordinates with metal finish. Plated stamped steel construction. Bronze or Satin Nickel. See next page for mulit light options. Stem-mount: 4 connectable stem sections (3, 6, 12 and 18 lengths) plus telescoping piece for up to 3 adjustment, 10 max. 5 Dia. canopy (with swivel) and stem sections are plated steel. Bronze or Satin Nickel. MOUNTING Installs directly to a 4 octagonal ceiling box. Suitable for sloped ceilings. LABELS UL or ETL Listed. Suitable for Damp Locations (interior use only). Consult factory concerning lower wattage labeling for energy requirements. Bana Shown in Clear (BanaCL) with Edison Lamp BanaAm Amber BanaFR Frost BanaSm Smoke Project Information: For ordering information, see next page All dimensions provided are nominal. Allowance must be made for dimensional tolerance in handcrafted glasses. REV 1/17 Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

37 bana 120V pendants ORDERING: Connection - SHADE OPTIONS - Lamp Options - Metal Finish - Options Cord Fixture BANAAM Amber (blank) 60W T10 Incan BR Bronze L 15 cord 1JC 1 Lt. Dome BANACL Clear EDI 40W Edison SN Satin Nickel LW Low wattage 1JT 1 Lt. Flat BANAFR Frost EDIL 5W LED Filament labeling BANASM Smoke Stem Fixture 1TT 1 Lt. Flat Multi light J For Multi light Canopy Ex. 1JT-BANACL-SN Bana Pendant w/ Clear Glass, Satin Nickel Finish MULTIPORT CANOPY OPTIONS: T33X 3 Light ROUND Canopy 8 10 Dia. shades MAX, with T33XL 3 Light Large ROUND Canopy Dia. shades MAX, with Multi light available See options to right T36X 6 Light ROUND Canopy Dia. shades MAX, with T39X 9 Light ROUND Canopy PENDANT OPTIONS: Dia. shades MAX, with 1Jt / 1jc / j Monopoint Pendant Canopy tt stem PENDANT std 10 max ACCESSORIES: 2.5 Flat (1JT) or Dome (1JC) Canopy styles. Dome style allows adjustment without cutting cord. J option is pendant less canopy for multiport canopy (options to the right) Cord: 10 SVT, 5 sleeve at socketholder (V Series utilizes SJT-type) Swivel at canopy, suitable for sloped ceilings Includes telescoping section plus 4 connectable stem sections, (1x 3, 1x 6, 1x 12, 1x 18 ), 10 max T33V 3 Light Bar Canopy T34V 4 Light Bar Canopy 43 T37V 7 Light Bar Canopy Dia. shades MAX, with 20 Dia. shades MAX, with 14 Dia. shades MAX, with ADDITIONAL STEM SECTIONS: Additional connecting stems are available to increase overall length, up to 10 max. Telescoping adjustable section allows up to 3 movement. T20A-SN or T20A-BR Adj. Section T203-SN or T203-BR 3 Section T206-SN or T206-BR 6 Section T212-SN or T212-BR 12 Section T218-SN or T218-BR 18 Section LONGER CORD LENGTHS: Longer cord length of 15 available. Add an L to the end of the item number, i.e. 1JC SNL. LOW WATTAGE LABELING: Incandescent fixture supplied with 16 watt relamp label. Add an LW to the end of the item number, i.e. 1JC SN-LW. CORD SLEEVES: If concealing the cord is desired, order our 0.25 dia. metal sleeves. Each sleeve is 18 long and may be field cut. T118-SN Satin Nickel T118-BR Bronze STEMHOOKS: Suspension hooks allow cord drops to be placed wherever desired. Suitable for sloped ceilings. T103BR Bronze T103SN Satin Nickel How to order a Multilight fixture Order your canopy with the selected 120V multi light pendants (indicated by B or J prefix) for the complete fixture: Example: 1x T33X-SN (3 Light Round Canopy) 1x J-BANAAM-SN (Bana Pendant in Amber) 1x J-BANACL-SN (Bana Pendant in Clear) 1x J-BANASM-SN (Bana Pendant in Smoke) Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

38 SPECIFICATIONS: DESCRIPTION Cord-hung or stem-mount pendant with handcrafted glass diffuser. Mira 120V pendants LAMPING Standard: 60W T10 Medium-based 120V, lamp not included. Dimmable with standard incandescent dimmer (not included). Edison: 40W Edison Filament Medium-based, 120V, lamp included. LED Edison: 5W Replaceable S-Style LED Filament lamp, 120V, dimmable, 2700 K CCT, 540 lumens, 15,000 hours, lamp included. DIFFUSER Shade shall be handcrafted glass of various decors.10 Dia. x 7.75 H SUSPENSION Cord-hung: 10 SVT-type cord, complete with 5 decorative sleeve at the socketholder. Jacket coordinates with metal finish. Plated stamped steel construction. Bronze or Satin Nickel. See next page for mulit light options. Stem-mount: 4 connectable stem sections (3, 6, 12 and 18 lengths) plus telescoping piece for up to 3 adjustment, 10 max. 5 Dia. canopy (with swivel) and stem sections are plated steel. Bronze or Satin Nickel. MOUNTING Installs directly to a 4 octagonal ceiling box. Suitable for sloped ceilings. LABELS UL or ETL Listed. Suitable for Damp Locations (interior use only). Consult factory concerning lower wattage labeling for energy requirements. Mira shown in Frost (MIRAFR) MIRAam Amber MIRACL Clear MIRASm Smoke Project Information: For ordering information, see next page All dimensions provided are nominal. Allowance must be made for dimensional tolerance in handcrafted glasses. REV 1/17 Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

39 mira 120V pendants ORDERING: MULTIPORT CANOPY OPTIONS: Connection - SHADE OPTIONS - Lamp Options - Metal Finish - Options Cord Fixture MIRAAM Amber (blank) 60W T10 Incan BR Bronze L 15 cord 1JC 1 Lt. Dome MIRACL Clear EDI 40W Edison SN Satin Nickel LW Low wattage 1JT 1 Lt. Flat MIRAFR Frost EDIL 5W LED Filament labeling MIRASM Smoke Stem Fixture 1TT 1 Lt. Flat T33X 3 Light ROUND Canopy 8 10 Dia. shades MAX, with Multi light J For Multi light Canopy Ex. 1JT-MIRACL-SN Mira Pendant w/ Clear Glass, Satin Nickel Finish T33XL 3 Light Large ROUND Canopy Dia. shades MAX, with Multi light available See options to right T36X 6 Light ROUND Canopy Dia. shades MAX, with T39X 9 Light ROUND Canopy PENDANT OPTIONS: Dia. shades MAX, with 1Jt / 1jc / j Monopoint Pendant Canopy tt stem PENDANT std 10 max ACCESSORIES: 2.5 Flat (1JT) or Dome (1JC) Canopy styles. Dome style allows adjustment without cutting cord. J option is pendant less canopy for multiport canopy (options to the right) Cord: 10 SVT, 5 sleeve at socketholder (V Series utilizes SJT-type) Swivel at canopy, suitable for sloped ceilings Includes telescoping section plus 4 connectable stem sections, (1x 3, 1x 6, 1x 12, 1x 18 ), 10 max T33V 3 Light Bar Canopy T34V 4 Light Bar Canopy 43 T37V 7 Light Bar Canopy Dia. shades MAX, with 20 Dia. shades MAX, with 14 Dia. shades MAX, with ADDITIONAL STEM SECTIONS: Additional connecting stems are available to increase overall length, up to 10 max. Telescoping adjustable section allows up to 3 movement. T20A-SN or T20A-BR Adj. Section T203-SN or T203-BR 3 Section T206-SN or T206-BR 6 Section T212-SN or T212-BR 12 Section T218-SN or T218-BR 18 Section LONGER CORD LENGTHS: Longer cord length of 15 available. Add an L to the end of the item number, i.e. 1JC SNL. LOW WATTAGE LABELING: Incandescent fixture supplied with 16 watt relamp label. Add an LW to the end of the item number, i.e. 1JC SN-LW. CORD SLEEVES: If concealing the cord is desired, order our 0.25 dia. metal sleeves. Each sleeve is 18 long and may be field cut. T118-SN Satin Nickel T118-BR Bronze STEMHOOKS: Suspension hooks allow cord drops to be placed wherever desired. Suitable for sloped ceilings. T103BR Bronze T103SN Satin Nickel How to order a Multilight fixture Order your canopy with the selected 120V multi light pendants (indicated by B or J prefix) for the complete fixture: Example: 1x T33X-SN (3 Light Round Canopy) 1x J-MIRAAM-SN (Mira Pendant in Amber) 1x J-MIRACL-SN (Mira Pendant in Clear) 1x J-MIRASM-SN (Mira Pendant in Smoke) Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

40 SPECIFICATIONS: DESCRIPTION Cord-hung or stem-mount pendant with handcrafted glass diffuser. Mira 120V pendants LAMPING Standard: 60W T10 Medium-based 120V, lamp not included. Dimmable with standard incandescent dimmer (not included). Edison: 40W Edison Filament Medium-based, 120V, lamp included. LED Edison: 5W Replaceable S-Style LED Filament lamp, 120V, dimmable, 2700 K CCT, 540 lumens, 15,000 hours, lamp included. DIFFUSER Shade shall be handcrafted glass of various decors.10 Dia. x 7.75 H SUSPENSION Cord-hung: 10 SVT-type cord, complete with 5 decorative sleeve at the socketholder. Jacket coordinates with metal finish. Plated stamped steel construction. Bronze or Satin Nickel. See next page for mulit light options. Stem-mount: 4 connectable stem sections (3, 6, 12 and 18 lengths) plus telescoping piece for up to 3 adjustment, 10 max. 5 Dia. canopy (with swivel) and stem sections are plated steel. Bronze or Satin Nickel. MOUNTING Installs directly to a 4 octagonal ceiling box. Suitable for sloped ceilings. LABELS UL or ETL Listed. Suitable for Damp Locations (interior use only). Consult factory concerning lower wattage labeling for energy requirements. Mira shown in Frost (MIRAFR) MIRAam Amber MIRACL Clear MIRASm Smoke Project Information: For ordering information, see next page All dimensions provided are nominal. Allowance must be made for dimensional tolerance in handcrafted glasses. REV 1/17 Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

41 mira 120V pendants ORDERING: MULTIPORT CANOPY OPTIONS: Connection - SHADE OPTIONS - Lamp Options - Metal Finish - Options Cord Fixture MIRAAM Amber (blank) 60W T10 Incan BR Bronze L 15 cord 1JC 1 Lt. Dome MIRACL Clear EDI 40W Edison SN Satin Nickel LW Low wattage 1JT 1 Lt. Flat MIRAFR Frost EDIL 5W LED Filament labeling MIRASM Smoke Stem Fixture 1TT 1 Lt. Flat T33X 3 Light ROUND Canopy 8 10 Dia. shades MAX, with Multi light J For Multi light Canopy Ex. 1JT-MIRACL-SN Mira Pendant w/ Clear Glass, Satin Nickel Finish T33XL 3 Light Large ROUND Canopy Dia. shades MAX, with Multi light available See options to right T36X 6 Light ROUND Canopy Dia. shades MAX, with T39X 9 Light ROUND Canopy PENDANT OPTIONS: Dia. shades MAX, with 1Jt / 1jc / j Monopoint Pendant Canopy tt stem PENDANT std 10 max ACCESSORIES: 2.5 Flat (1JT) or Dome (1JC) Canopy styles. Dome style allows adjustment without cutting cord. J option is pendant less canopy for multiport canopy (options to the right) Cord: 10 SVT, 5 sleeve at socketholder (V Series utilizes SJT-type) Swivel at canopy, suitable for sloped ceilings Includes telescoping section plus 4 connectable stem sections, (1x 3, 1x 6, 1x 12, 1x 18 ), 10 max T33V 3 Light Bar Canopy T34V 4 Light Bar Canopy 43 T37V 7 Light Bar Canopy Dia. shades MAX, with 20 Dia. shades MAX, with 14 Dia. shades MAX, with ADDITIONAL STEM SECTIONS: Additional connecting stems are available to increase overall length, up to 10 max. Telescoping adjustable section allows up to 3 movement. T20A-SN or T20A-BR Adj. Section T203-SN or T203-BR 3 Section T206-SN or T206-BR 6 Section T212-SN or T212-BR 12 Section T218-SN or T218-BR 18 Section LONGER CORD LENGTHS: Longer cord length of 15 available. Add an L to the end of the item number, i.e. 1JC SNL. LOW WATTAGE LABELING: Incandescent fixture supplied with 16 watt relamp label. Add an LW to the end of the item number, i.e. 1JC SN-LW. CORD SLEEVES: If concealing the cord is desired, order our 0.25 dia. metal sleeves. Each sleeve is 18 long and may be field cut. T118-SN Satin Nickel T118-BR Bronze STEMHOOKS: Suspension hooks allow cord drops to be placed wherever desired. Suitable for sloped ceilings. T103BR Bronze T103SN Satin Nickel How to order a Multilight fixture Order your canopy with the selected 120V multi light pendants (indicated by B or J prefix) for the complete fixture: Example: 1x T33X-SN (3 Light Round Canopy) 1x J-MIRAAM-SN (Mira Pendant in Amber) 1x J-MIRACL-SN (Mira Pendant in Clear) 1x J-MIRASM-SN (Mira Pendant in Smoke) Besa Lighting Co., Inc Taylor Rd. Blacklick, OH tel fax

42 S T10/LED/E26/27K/120V 4.5 watt T10 LED; Clear; Medium base; 2700K; 430 lumens; 120 volts Features LED with a traditional incandescent look and feel Omni-directional light source Smooth dimming Replaces up to 40 watt lamps Long life - 15,000 hours Damp Location UL listed for totally enclosed fixtures Compatible Dimmers Leviton DSE06 Cooper TAL06P-C1 Lutron Nova TCL S9580 When used with incandescent dimmers, derate the dimmer's maximum load by 75%. Consult your local electrical code to ensure compliance. Item Number UPC Voltage Watts Incandescent Equivalent Power Factor Lamp Shape Base S W >0.70 T10 Medium ANSI Base Lamp Code Dimmable/Non- Dimmable Finish MOL In Inches MOD In Inches Initial Lumens Average Rated Hours E26 4.5T10/LED/E26/27K/120V Dimmable Clear 5'' 1.25'' Kelvin Temp 2700 Color Warm White CRI Beam Spread Deg Operating Temperature Pack Package Type RoHS Compliant -20 C (-4 F) to a maximum of +45 C (113 F) 24/6 Box Yes UL or ETL Listed UL Classification Warranty Yes culus - Damp Location Rated 3 Year Limited