Scottsdale Vertex - SCV Petroleum Canopy LED Luminaire

Transcription

1 Catalog # : Project : Prepared By : Date : Scottsdale Vertex - SCV The Scottsdale Vertex is the most feature-rich canopy fixture in the marketplace. Innovations such as combined optical distributions, multiple lumen packages, field serviceability and simple installation make this fixture the ideal canopy solution. Its exceptional design and performance are backed by LSI s best-in-class customer service. ARRA Funding Compliant Features & Specifications Optical System Proprietary silicone refractor optics provide exceptional coverage and uniformity in Symmetrical or Combination Forward Throw distributions. Silicone optical material does not yellow or crack with age and provides a minimum light transmittance of 93%. Dimensions Available in 5000K and 4000K (+/- 275K) color temperatures. Minimum CRI of 70. Electrical High-performance driver features over-voltage, under-voltage, short-circuit and over temperature protection. 0-10V dimming (10% - 100%) standard (343mm) 15.9 (403mm) 2.9 (74mm) Standard Universal Voltage (0-277 Vac) Input 50/0 Hz or optional High Voltage ( Vac). L80 Calculated Life: >100k Hours (See Lumen Maintenance on Page 2) Total harmonic distortion: <20% 13.5 (343mm) 1.0 (25mm) 2.1 (54mm) Operating temperature: -40 C to +50 C (-40 F to +2 F) when mounted to Steel/Aluminum surfaces for 10L, 13L, & 15L Lumen Packages, +45 C for 20L Lumen Package, and +40 C for 23L Lumen Package. If mounted to a non-metallic surface, reduce ambient by 5 C. Power factor: >0.90 3/4 NPS 9.75 (248mm) gasket Input power stays constant over life. Field replaceable surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C2.41.2). High-efficacy LEDs are mounted to (4) circuit boards to maximize heat dissipation Top View Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. A single fastener secures access door to driver and key components and provides quick & easy access to the electrical compartment for servicing. Locking Collar Aluminum locking collar and gasket are included and required for complete seal and support of canopy deck.

2 Features & Specifications (Cont.) Construction Rugged low-profile die-cast aluminum housing, optical unit, and driver cover. Ultra-slim 2 luminaire height and lightweight design effectively target a broad range of applications and allow for easy installations. Below canopy access to optical chamber and driver housing for serviceability. Luminaire is proudly manufactured in the U.S. of U.S. and imported parts. Fixtures are finished with LSI s DuraGrip polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Other standard LSI finishes available. Consult factory. Shipping weight: 15 lbs in carton. Controls Optional integral passive infrared motion and daylight sensor activates switching of luminaire light levels (see page for more details). LSI s AirLink wireless control system options reduce energy and maintenance costs while optimizing light quality 24/7. (see page 7 for more details) Installation Installs in a or 1 deck pan. Deck penetration consists of a minimum 3 hole and four suitable fasteners, creating a simple installation. Four fasteners are provided with the fixture for use in single deck, metallic canopy substrates only when classified as suitable for use by installing professional. Otherwise, suitable fasteners should be provided by others. Unit is designed to quickly retrofit into existing Scottsdale (4 ) hole. Aluminum locking collar and gasket are included and required for complete seal and support of canopy deck. Retrofit panels are available for existing Encores, Richmond, 2x2 Universal, and more (see accessories on page 3). Warranty LSI LED Fixtures carry a 5-year warranty or 10-year warranty with registration for petroleum applications only (contact your LSI representative for details). Listings Listed to UL 1598 and UL RoHS Compliant. State of California Title 24 Compliant with IMS or ALSC/ALSCS option. American Recovery and Reinvestment Act Funding Compliant. Lighting Facts Approved. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. Performance DELIVERED LUMENS* 4000K 5000K Lumens Delivered Lumens Efficacy Delivered Lumens Efficacy Wattage 10L 10, , L, , L 15, , L 20, , L (SC) 22, , L (SCFT) N/A N/A 24, *LED Chips are frequently updated therefore values are nominal. ELECTRICAL DATA* Lumens 0V 208V 240V 277V 347V 480V 10L L L L L (SC) L (SCFT) *Electrical data at 25C (77F). Actual wattage may differ by +/-10%. SC DISTRIBUTION RECOMMENDED LUMEN MAINTENANCE 1 Ambient Temperature Lumen Multiplier C 0 hrs. 2 25K hrs. 2 50K hrs. 2 75K hrs K hrs Lumen maintenance values at 25 C are calculated per TM-21 based on LM-80 data and in-situ luminaire testing. 2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip). 3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times NA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip). SCFT DISTRIBUTION RECOMMENDED LUMEN MAINTENANCE 1 Ambient Temperature Lumen Multiplier C 0 hrs. 2 25K hrs. 2 50K hrs. 2 75K hrs K hrs Lumen maintenance values at 25 C are calculated per TM-21 based on LM-80 data and in-situ luminaire testing. 2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip). 3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times NA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip).

3 Luminaire Ordering Guide TYPICAL ORDER EXAMPLE: SCV LED 13L SC UNV DIM 50 WHT IMS Family / Size LED Gen Lumen Package* Distribution Voltage Driver Color Temperature Finish Controls SCV - Petroleum Canopy Luminaire LED 10L Lumens 13L Lumens SC - Standard Symmetric UNV V DIM - Dims to 10% (0 to 10V dimming) K K WHT - White BLK - Black Blank - NONE 15L Lumens 20L Lumens HV - BRZ - Bronze IMS 3,4 - Integral Motion & Daylight Sensor 23L Lumens V Consult factory for additional paint finishes ALSC 2 - AirLink Synapse Wireless Control System 23L Lumens SCFT 1 - Combination Standard Symmetric and Forward Throw ALSCS 2 - AirLink Synapse Wireless Control System with Sensor Accessory Ordering Information Description Order Number Description Order Number Retrofit Panel Kit - EC / ECTA / SCF to SCV, for 1 Deck Panel with larger openings X 32 Beauty Plate Kit (with 4 Center hole) 5809 Retrofit Panel Kit - EC / ECTA / SCF to SCV, for Deck Panel with larger openings (includes J-Box and stem) Retrofit Panel Kit - RECU Richmond to SCV 7342 Conduit stem (includes stem and conduit nuts) 7380 Retrofit Panel Kit - UNV Universal 2x2 to SCV Kit - Hole Plugs and Sealant (enough for 25 retrofits) Retrofit 2x2 Cover Panel Blank (no holes) Rectangular Hole Kit (includes top plate and sealant) (Available Soon) Retrofit RIC Cover Panel Blank (no holes) Surface Mount Box (Available Soon) X 2 Beauty Plate Kit (with 4 Center hole) WHT IMS/PC Remote Configurator Tool FOOTNOTES: 1 - Only available in 23L lumen package at 5000K color temperature. 2 - Not available in HV. 3 - IMS is a dual sensor (Daylight & Motion) which is field adjustable via IMS hand held remote configurator tool, which must be ordered separately. 4 - Not compatible with external dimming. 5 - Ideal for 9 to openings. - Matches the conduit locations of existing Scottsdale, CRU, CRUS, CRO2, and CRO3. Designed to align to existing conduit of Scottsdale (HID) and many other LSI fixtures. [includes J-Box and conduit stem] # Conduit stem Helpful when using an existing junction box. [includes 4.5 stem and conduit nuts] #7380

4 Retrofit Ordering Information To Retrofit Product Existing Application Required Accessory Kit Optional Accessory Kit New Construction New Construction NONE REQUIRED LSI Scottsdale LSI CRU LSI CRUS 4 Hole NONE REQUIRED LSI Encore (bottom access) Cree 304 Cree CAN LED LSI ECTA LSI Scottsdale Flat 1 deck pan with square hole or 9 round hole or x rectangular hole ENCORE 1 ACCESSORY KIT Includes: top panel with sealant LSI ECTA LSI Scottsdale Flat Cree CAN LED deck pan with 9 round hole or x rectangular hole ENCORE ACCESSORY KIT 7011 Includes: top panel with sealant LSI CRO2 LSI CRO3 LSI CRS 5-hole pattern with 7 or 4 diameter NONE REQUIRED Conduit Stem 7380

5 Retrofit Ordering Information To Retrofit Product Existing Application Required Accessory Kit Optional Accessory Kit LSI CRO2 LSI CRO3 LSI CRS Existing EC/ECTA retrofit of 9 or hole to 5-hole pattern or 4 hole Encore 1 Accessory Kit or Encore Accessory Kit 7011 Conduit Stem (use existing box) 7380 RECU Richmond Retrofit Rectangular Richmond housing RECU ACCESSORY KIT 7342 Includes cover panel, guide panel, tether clip and hardware Total Replacement of: LSI Richmond Cree CAN-228 0LED Cree CAN LED Rectangular hole 9.5 x x x RECTANGULAR HOLE KIT Available Soon Includes cover panel, top plate, hardware and sealant UNV (Universal 2x2) LSI Masters LSI Dakota Other similar 2x2 products Surface mount 2x2 housing UNV ACCESSORY KIT Includes mounting panel with auxiliary latch, 4 inner flange brackets and hardware to attach panel to fixture Remove Surface Mount Box Conduit hole and possible discoloration of decking NONE REQUIRED 2 Beauty Plate (no holes) Beauty Plate with 4 center hole WHT New Surface Mount Box SURFACE MOUNT BOX KIT INCLUDES Available Soon Includes 2 deep housing with tether kit, tether bolt and mounting bolts. (Part # TBD)

6 Scottsdale Vertex - SCV Photometry Luminaire photometry has been conducted by an NVLAP accredited testing laboratory in accordance with IESNA LM As specified by IESNA LM the entire luminaire is tested as the source resulting in a luminaire efficiency of 100%. See for detailed photometric data. SC SCFT CANOPY COMPARISON Canopy Layout Fixture QTY Fixture Lumens Fixture Watts Lumens/ Watts Canopy/ Watts Canopy Watts/Sq. Ft. *Canopy/Avg. *Transition Area Avg. 1 SCV-LED-13L-SC-50 18, , SCV-LED-10L-SC-50 10, , , SCV-LED-13L-SC-50, , ,31 7 SCV-LED-15L-SC-50 15, , ,31 7 SCV-LED-20L-SC-50 20, , ,31 7 SCV-LED-23L-SC-50 23, , , *Initial foot-candle values at grade. 50 ft. () Symmetrical AND () Combo FT Fixtures 50 ft. (18) 13L Symmetrical Fixtures Transition Area Canopy Transition Area Canopy

7 Controls Occupancy Sensor / Daylight Sensor (IMS) Optional integral passive infrared motion and daylight sensor activates switching of luminaire light levels. Standard Factory settings: High level light is activated and increased to full bright upon detection of motion. Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~5 minutes. See coverage diagram for detection cone. Optional configurator tool allows for easy and safe programming of each luminaire from the ground level. SIDE VIEW 0' 5' 10' IMS Coverage Diagram IMS/PC Remote Configurator Tool 15' 18' 15' ' 9 ' ' 3 ' 0 ' 3 ' ' 9' ' 15' 18' TOP VIEW 10' enabled by Lutron 0' 40' 10' 10' 0' 10' enabled by Synapse Wireless Lighting Controller (ALSC/ALSCS) The AirLink integrated controller is a California Title 24 compliant lighting controller that provides real-time light monitoring and control with utility-grade power monitoring. It includes a 24V sensor input and power supply to connect up to two (2) sensors into the outdoor AirLink wireless lighting system. Features 2% Utility Grade Power Monitoring Up to 80% Savings through smart dimming True On/Off functionality via switched relay Seamlessly integrates into the outdoor AirLink wireless lighting control solution & Self-healing Mesh Networking Relay closes on power loss Supports a wide range of LED drivers and fixtures Class 1 / Class V Dimming Control Direct Connect up to two (2) to 24V Occupancy Sensors and Photocells (consult sales for compatible list) Secure, over-the-air upgrades to support future enhancements Excellent RF Range 1,000ft LoS between controllers Lights default to on for safety Specifications Regulatory Approvals FCC, IC, CE certified culus Listed California Title 24 compliant Power and Performance Operating environmental: -40 F to 131 F (-40 C to 55 C) Input power: VAC +/- 10% (Max 305V)47/4 Hz Switched output: Default ON; Zero Cross Switching Load rating: 100V to 277V (+/- 10%) Dimming: 0 10V control; Output: Class 1/2-20mA Source Max / 50mA Sink Max Power monitoring: Utility grade - 2% accuracy Sensors inputs: 0 10V (photocell sensors), 0 24V (all other sensors); Sensor power supply: 50mA Other Radio: SNAP 2.4 GHz; ; +20 dbm Transmit Power; -105 dbm Receive Sensitivity Warranty: 5 years Sales controls.sales@lsi-industries.com Support controls.support@lsi-industries.com 1 (800) (support, option 8) More information For more information on AirLink, visit our website at