Impact. take the. Traffic Doors Flexible Impacdor. Usage Chart Optima Magna... 5 XHD

Transcription

1 catalog Traffic Doors that really take the Impact Usage Chart... 2 Flexible Impacdor Clear-Valu... 3 Optima... 4 upra... 5 Magna... 5 Rigid Impacdor F F RD FD HD XHD AI AI-XHD teel-lite TM Color Options Hardware, Jamb Guards, Bumpers & Impact anels Jettream Air Curtain Aleco roduct Line com

2 usage chart Aleco ImpacDors are designed for durability. Offering a full range of traffic doors, Aleco s product line is available in clear, rigid and flexible doors suitable for forklift or pedestrian traffic. Our Impacdor usage chart below can help guide you to the right door for your application. lease call an Aleco representative with any questions, Clear-Valu Optima upra Magna F-250 F-500 RD-175 FD-175 HD-175 XHD-175 AI-175 AI-XHD teel-lite TM Industrial/Commercial Heavy Forklift (30 cycles per hour) Medium Forklift (15-30 cycles per hour) Light Forklift (15 or less cycles per hour) Motorized allet Jack Hand allet (5) Carts & ersonnel Washdown UDA* Cold torage above 32 F Cold torage below 32 F (4) (4) (2) (2) (1) (3) (5) (5) (1) Retail/upermarket/Restaurant rimary ales - tock & alletized Loads econdary ales - tock (tock Cars/ersonnel) rep Areas (Cart & ersonnel) Loading Dock -ND -ND -ND -ND -ND tock Cooler Kitchen to Dining * lease specify washdown or UDA applications when ordering; optional features may be necessary to accomodate UDA / Washdown requirements. 2 : rimary Application : econdary Application : Not Recommended -ND: No Direct unlight -ND: No Direct unlight (1) Can be used down to minus 40 F. (2) Do not use below 20 F. (3) Can be used down to minus 40 F with metal skin and down to 20 F with AB skin. (4) Can be used down to minus 40 F with low temp material. (5) Can be used down to minus 10 F.

3 + + CLEAR-VALU Clear-Valu Walk-In Coolers & Freezers Food ervice & Food rocessing Facilities harmaceutical & Laboratories ersonnel Traffic The Aleco Clear-Valu ImpacDor is the strip door alternative. Two crystal clear flexible VC panels for walk-in coolers and freezers with a center overlap create an energy tight seal. The Aleco Clear-Valu ImpacDor is easy to install and easy to use. The swinging doors open with minimum force and close automatically in seconds. The closing speed is fully adjustable and the polished stainless steel Clear-Valu hinges are guaranteed not to rust or corrode. Crystal clear panels are available in both cooler and freezer formulation in.080 and.120 thickness. anels are packaged flat, not rolled, to insure straight hanging for a tight seal. In addition, Clear-Valu doors can be field adjusted and modified for a perfect fit. The complete Clear-Valu door includes mounting hardware. Features: Tight seal & economical price Crystal clear panels for cooler or freezer use tainless steel hinges Easy to open-closes automatically Adjustable closing speed Includes mounting hardware -ready to install Easy to replace panels tainless steel easy-to-open hinges close automatically in seconds Can be flush mounted or in-jamb mounted LIFETIME WARRANTY on Clear-Valu Hinges (Limited warranty. Contact your Aleco representative for details.) Call toll free or visit us online:.com 3

4 World s Only One-iece Flapper tyle Impact Door OTIMA 4 OTIMA Industrial lants Food rocessing lants harmaceutical & Medical Facilities Retail tores Cold torage Warehouses Restaurants upermarkets The Aleco Optima ImpacDor is an exclusive one-piece flexible VC panel door designed for light to medium traffic. The flexible ImpacDor is ideal for pallet jack, pushcart, pedestrian and light to medium forklift use. Features: One-piece VC panel construction Attractive yet tough textured finish Available in two thicknesses: tandard:.250 (1/4 ) and Economy:.160 (5/32 ) The 15 x 18 clear VC window (of the same thickness above) is radio frequency (RF) welded to the primary panels Finished panels may be field modified Allows full width access, no bottom hinges to restrict traffic flow NOTE: Fasteners required to attach the product to existing opening. Frame is not included but available. Mounting Detail Optima Hardware Available Options: Choice of decorative colors: Beige, Brown, Light Grey, Black, Blue, Green, Red and Clear. tainless steel hinge Wear panels Gasketing Engineered for a variety of traffic The Optima ImpacDor is designed for light to medium commercial, industrial and food processing applications where built-in durability is required. Tough, single-ply, wear resistant VC panels, available in two thicknesses (1/4 and 5/32 ), absorb the initial impact of loads. atent pending onepiece VC panels are easy to clean, maintain and can be inexpensively replaced when required/needed. The Optima door should be mounted in the center of the opening on a jamb no wider than 6 for proper operation of the gravity hinge system. For applications outside these parameters please contact your Aleco representative for possible solutions. Durable, maintenance-free, and easy to install The Optima ImpacDor features a corrosion resistant steel hinge and mounting arm. This heavy-duty, top mounted gravity hinge allows for full 180 swing capability while bronze bushings make operation smooth and easy. olid plate mounting arms offer greater strength and durability than traditional bar designs. Functional designs A totally clear 15 x 18 window is conveniently located 48 from the bottom of the door panel, and is radio frequency (RF) welded in place which creates our innovative Optima design. Bi-parting models overlap in the center up to 2 (1 on 8 wide models. Frame not included

5 + + + supra The Aleco upra ImpacDor is a flexible panel VC door designed for heavy-duty use and maximum visibility. With a full width crystal clear panel for maximum safety, the upra ImpacDor is ideal for heavy-duty forklift, pallet jack, pushcart and pedestrian use. Features: Crystal clear VC,.394 thick Unrestricted visibility Designed for heavy-duty industrial, commercial and food processing traffic Adjustable torsion spring closing mechanism assures 180 swing capability on even plane Lower threaded adjuster makes for quick and easy installation and alignment Mounting Detail Magna and upra Hardware Door rotated for clarity magna The Aleco Magna ImpacDor is a flexible panel VC door designed for heavy-duty use. With a full width crystal clear upper vision section for optimum safety and a gray opaque lower impact section, the Magna ImpacDor is ideal for heavy-duty forklift, pallet jack, pushcart and pedestrian use. Features: Crystal clear VC upper section fused with gray opaque VC lower,.394 thick Opaque lower portion keeps door looking great after repeated use Adjustable torsion spring closing mechanism assures 180 swing capability on even plane Lower threaded adjuster makes for quick and easy installation and alignment Call toll free or visit us online:.com 5

6 F-250 Food ervice Restaurants Retail tores Commercial Applications Light Hand Carts & allets The Aleco ImpacDor F-250 is a lightweight, durable and economical 1/4 (6mm) AB door with reinforced spine that provides exceptional strength and longevity. The Aleco ImpacDor F-250 is a double-acting door designed for food service, restaurant, retail and light handcart and pallet applications where an attractive, durable and affordable traffic door is needed. The solid AB door-body is impenetrable to moisture, food stains and common chemicals. Drips, spills and smears simply wipe off, leaving a clean surface. Unique design eliminates chipping and peeling The Aleco ImpacDor F-250 is a one-piece solid-core door without gasketing. The flexibility of the door allows it to function well even in high cart and personnel traffic areas. The facing will not chip, peel or corrode, even with repeated impact by carts, hand truck and pallets. The color of the door is consistent throughout the material for an attractive long-lasting appearance. The F-250 opens quickly and easily with EZ hinge hardware With the EZ hinge system, the F-250 operates smoothly and quietly, and includes 8-3/4 high jamb guards. Easy-toopen doors will translate to longer lasting doors and safer personnel and product passage. F-250 doors open 125 degrees in each direction to accommodate the natural flow of traffic. EZ Hinge 5-YEAR WARRANTY (Limited warranty. Contact your Aleco representative for details.) Custom made to exact size Most Aleco doors are made to exact size specifications to fit existing door openings. For consistent performance, sizes are customized to 1/8 on every F-250 door to fit perfectly. 6

7 + F-250 F-250 Features: Rugged 1/4 (6mm) AB construction with reinforced spine Zinc plated mounting hardware (tainless teel upgrade available) Easy installation Light, responsive swing action accommodates personnel, carts and racks up to moderate pallet jack traffic Options: Choice of decorative colors: Cloud Gray, Charcoal Gray, Black, Cadet Blue, Cocoa, Chocolate, Burgundy, Beige, Red, White, Royal Blue and Green AB & stainless steel pad style impact wear panels TM any height TL250 up MODEL to 48 Vision panels in various sizes and styles TL250 MODEL TM NCE 1/4" THICK AB IMACT FACING 1/8" THICK AB IMACT ANEL 6" WIDE X 1/4" THICK BACK TRI BOTH IDE ECTION "AA" ALUMINUM BACK CA Mounting Hardware NUMBER OF AIR: WIDTH F-250 Door pecifications CLEAR WIDTH CLEAR 3/4" CLEARANCE 3/4" CLEARANCE 1/4" THICK AB IMACT FACING 1/8" THICK AB IMACT ANEL ALUMINUM BACK CA OTIONAL 48" HIGH 1/8" THICK AB WEAR ANEL TEEL ANGLE MOUNTED TO HEADER AND JAMB HARDWARE COVER 6" WIDE X 1/4" THICK BACK TRI BOTH IDE ECTION "AA" DOOR F NTRUCTION) CK [ ] BOTTOM IVOT E H ON) COLOR: ILABLE : 1/4" THICK AB FACING 1/8" THICK AB IMACT ANEL 6" WIDE X 1/4" THICK BACK TRI BOTH IDE TO MOUNTING BRACKET ALUMINUM BACK CA BOTTOM MOUNTING BRACKET MOUNTING DETAIL OFFET IVOT HARDWARE DOOR ROTATED FOR CLARITY JAMB HEIGHT CLEAR 8 3/4" TEEL JAMB GUARD 4'-6" TD. HEIGHT CLEAR 4'-6" TD. ELEVATION OF DOOR 1/2" FLOOR TANDARD FEATURE CLEARANCE - 1/4" MINIMUM DOOR THICKNE ELEVATION OF DOOR - 8" x 10" VIION ANEL EACH LEAF - OFFET IVOT HARDWARE (UITABLE FOR MOT JAMB CONTRUCTION) - ERMANENT COLOR FACING: BEIGE [ ] CLOUD GREY [ ] BLACK [ ] CHARCOAL GREY [ ] - 8 3/4" TEEL JAMB GUARD WITH BOTTOM IVOT Call toll free or visit us online: OTIONAL FEATURE: 1/2" FLOOR CLEARANCE OTIONAL 48" HIGH 1/8" THICK AB WEAR ANEL OTIONAL 48" HIGH 1/8" THICK AB WEAR ANEL 1/4" THICK AB FACING 1/8" THICK AB IMACT ANEL TEEL ANGLE MOUNTED TO HEADER AND JAMB HARDWARE COVER TEEL ANGLE MOUNTED TO HEADER AND JAMB HARDWARE COVER tandard Jamb Guard: TO MOUNTING 8 3/4 Zinc lated BRACKET Jamb Guard for EZ Hinge Hardware 1/4" THICK AB FACING ALUMINUM BACK CA BOTTOM MOUNTING BRACKET JAMB.com 7 TO MOUNTING BRACKET ALUMINUM BACK CA JAMB [ ] RE-HUNG IN ALUMINUM FRAME

8 F-500 Food ervice Restaurants Retail tores Light Industrial The Aleco ImpacDor F-500 is versatile and attractive 3/4 (19mm) door with wood core and durable laminates to match a wide range of restaurant and retail decor. The Aleco ImpacDor F-500 is the perfect solution for demanding food service, restaurant, retail and light industrial applications seeking to provide a visual barrier or a damper to air currents in busy doorways. Colorful 1/8 (3mm) AB facings are bonded to a 1/2 (13mm) solid wood core to resist palletized loads, yet remain light enough to swing freely in high volume foot traffic. The F-500 opens quickly and easily with EZ hinge hardware With the EZ hinge system, the F-500 operates smoothly and quietly, and includes 8-3/4 high jamb guards. Easy-toopen doors will translate to longer lasting doors and safer personnel and product passage. F-500 doors open 125 degrees in each direction to accommodate the natural flow of traffic. hown with optional jamb guards EZ Hinge 5-YEAR WARRANTY (Limited warranty. Contact your Aleco representative for details.) Custom made to exact size Most Aleco doors are made to exact size specifications to fit existing door openings. For consistent performance, sizes are customized to 1/8 on every F-500 door to fit perfectly. 8

9 + F-500 F-500 Features: Rigid solid wood core with reinforced metal spine EZ hinge installs and operates effortlessly Attractive design and a wide selection of facings to suit restaurant and retail settings Zinc plated mounting hardware (tainless teel upgrade available) 11-1/2 x 15-1/2 dual pane windows standard Options: Choice of decorative colors: Cloud Gray, Charcoal Gray, Black, Cadet Blue, Cocoa, Chocolate, Burgundy, Beige, Red, White, Royal Blue and Green AB, vinyl & stainless steel impact wear panels any height up to /4 high stainless steel jamb guards Facings such as anodized aluminum, stainless steel and high pressure laminates (Formica, Wilson Art, or Nevamar ) Mounting Hardware F-500 Door pecifications WIDTH CLEAR 3/4" CLEARANCE VINYL NOING FACING ALUMINUM BACK CA JAMB OLID, HIGH DENITY CORE TEEL ANGLE MOUNTED TO HEADER AND JAMB ECTION "AA" HARDWARE COVER JAMB TO MOUNTING BRACKET ALUMINUM BACK CA BOTTOM MOUNTING BRACKET HEIGHT CLEAR 4'-6" TD. MOUNTING DETAIL OFFET IVOT HARDWARE 8 3/4" TEEL JAMB GUARD 1/2" FLOOR CLEARANCE ELEVATION OF DOOR tandard Jamb Guard: 8 3/4 Zinc lated Jamb Guard for EZ Hinge Hardware DOOR ROTATED FOR CLARITY Call toll free or visit us online:.com 9

10 RD-175 Food rocessing lants Food ervice Retail tores harmaceutical and Medical Facilities Light Industrial The Aleco ImpacDor RD-175 is a durable, lightweight, attractive door with zinc plated hardware, insulated panel and full perimeter seal ideal for rack, push cart and pallet jack traffic. The Aleco ImpacDor RD-175 is designed for effortless swing using the zinc plated upper EZ hinge and 8-3/4 high zinc plated lower jamb guard. The Aleco RD-175 is constructed from rigid VC sub-frames ultrasonically welded to the 1/8 thick AB facings available in 12 colors. The internal closed cell foam insulation provides an R-value of 7. The Aleco RD-175 is constructed without wood, glue or rivets and is ideal for wash down applications when ordered with the single pane window option. uperior perimeter seal design for a superior seal The Aleco RD-175 features a fully replaceable perimeter seal including the leading edge of each panel. Leading edge seals are extruded from UDA and FDA accepted Neoprene material. Ideal for any application where a durable, tight sealing, insulated, energy saving door is desired. Dual pane windows The Aleco RD-175 windows feature dual pane construction for superior insulation qualities. Windowpanes are 1/8 clear polycarbonate mounted in AB frames for long-term durability. 10 The RD-175 opens quickly and easily with EZ hinge hardware With the EZ hinge system, the RD-175 operates smoothly and quietly, and includes 8-3/4 high jamb guards. Easy-toopen doors will translate to longer lasting doors and safer personnel and product passage. RD-175 doors open 125 degrees in each direction to accommodate the natural flow of traffic. EZ Hinge 5-YEAR WARRANTY (Limited warranty. Contact your Aleco representative for details.) Custom made to exact size Most Aleco doors are made to exact size specifications to fit existing door openings. For consistent performance, sizes are customized to 1/8 on every RD-175 door to fit perfectly.

11 + + RD-175 RD-175 Features: Internal VC framework onic-welded AB facings - no adhesive or screws Zinc plated mounting hardware (tainless teel upgrade available) Lightweight, insulated full thickness 1-3/4 (44mm) door Easily replaceable seals Constructed of UDA and FDA accepted materials EZ Hinge installs quickly on almost any jamb Options: Choice of decorative colors: Cloud Gray, Charcoal Gray, Black, Cadet Blue, Cocoa, Chocolate, Burgundy, Beige, Red, White, Royal Blue and Green Molded polyethylene bumpers from 12 to 48 tall AB & stainless steel pad style impact wear panels any height up to 48 Washdown package WITH OFFET IVOT HARDWARE Mounting Hardware RD-175 Door pecifications WIDTH CLEAR 3/4" CLEARANCE NOING TOUGH LATIC FACING MOUNT AEMBLY R CLOED CELL TYROFOAM CORE TEEL ANGLE MOUNTED TO HEADER AND JAMB ECTION "AA" JAMB AIR EAL HARDWARE COVER JAMB 1/8" THICK AB FACING TO MOUNTING BRACKET EXTRUION WITH LOO EAL LOWER IVOT IN 1/2" FLOOR CLEARANCE ELEVATION OF DOOR 8 3/4" JAMB GUARD tandard Jamb Guard: 8 3/4 Zinc lated Jamb Guard for EZ Hinge Hardware...[ ] MOUNTING DETAIL OFFET IVOT HARDWARE DOOR ROTATED FOR CLARITY 8 3/4" TEEL JAMB GUARD Call toll free or visit us online:.com 11

12 12 FD-175 Industrial lants Food rocessing lants harmaceutical and Medical Facilities Retail tores The Aleco ImpacDor FD-175 is a semi-flexible, full thickness door with a rubber sub-frame and full height mount assembly for the toughest industrial, commercial and retail use. The Aleco ImpacDor FD-175 is a highly versatile door designed for industrial, commercial and food processing applications where an attractive, durable and affordable traffic door is needed. Fully insulated and gasketed, it is an excellent door for temperature control in industrial, commercial, retail and food processing facilities. All materials meet UDA guidelines, making the FD-175 a good choice for meat packing plants as well. Built-in durability features make the Aleco FD-175 resistant to impact abuse by carts, pallets, hand trucks and light fork lift traffic. Engineered to be durable, shock-absorbing and maintenance-free The Aleco ImpacDor FD-175 rubber honey-comb framework and flexible urethane foam insulation allow it to absorb impacts from commercial and light industrial traffic. The rugged AB facing is available in a variety of colors and won t chip, dent, peel, pit or corrode. This proven construction withstands abuse and provides years of dependable operation and attractive appearance with minimal maintenance. The FD-175 s rugged V-Cam gravity hinge hardware is virtually indestructible A cast Meehanite hinge with sealed bearings provides a 180 swing arc and 3/4 (19mm) rise. An extended swing and 1-1/2 (38mm) rise is also available. Installation, including adjustments for out-of-square doorways, is fast and easy. Cast Meehanite Cam Follower ealed Roller Bearing Cast Meehanite V-Cam High trength teel Tubing Extruded Aluminum Bottom Bearing V-Cam Hinge Lifetime WARRANTY (Limited warranty. Contact your Aleco representative for details.) Custom made to exact size Most Aleco doors are made to exact size specifications to fit existing door openings. For consistent performance, sizes are customized to 1/8 on every FD-175 door to fit perfectly.

13 + + + FD-175 FD-175 Features: Full thickness 1-3/4 (44mm) insulated construction Rubber sub-frame and flexible foam construction Durable, attractive AB facings in many colors Full height mount assemblies Dual pane polycarbonate vision panels Full perimeter seals including leading edge Meets UDA guidelines ealed bearing corrosion resistant V-cam hardware with 1-1/2 rise cam TANDARD MODEL Options: HEAVY DUTY VINYL Choice of decorative OR RUBBER FACING colors: Cloud Gray, Charcoal Gray, Black, Cadet Blue, Cocoa, Chocolate, Burgundy, Beige, Red, White, NEORENE IMREGNATED INULATION Royal Blue and Green TILE Molded polyethylene ECTION "AA" JAMB AIR EAL bumpers from 12 to 48 tall AB & stainless AFETY CUHIONsteel pad NOING style impact wear panels ATENDED HONEYCOMB EXTRUION ROVIDED VERTICAL any & HORIZONTAL height up to 48 TRENGTH Vision panels in various sizes NEORENE IMREGNATED and styles INULATION Washdown package AFETY CUHION NOING MOUNT AEMBLY For pressure and wind loads: RUBBER FACING Adjustable spring compensator OTIONAL) Top mounted compression spring TOUGH, FLEXIBLE VINYL FACING (ROTOCURED EXCLUIVE TRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER) FD-175 Door pecifications NUMBER OF AIR: WIDTH CLEAR 3/4" FORWIDTH CAM 3/4" RIEFOR CLEAR CAM RIE AFETY CUHION NOING Frame not included TM but OLY-KOR TOUGH LATIC FACING MOUNT AEMBLY FLEXIBLE, OLYMER FOAM INULATION TILE JAMB AIR EAL ECTION "AA" INTERNAL CONTRUCTION Mounting Hardware ROLLER FOLLOWER "V" CAM BOTTOM HEIGHT CLEAR 4'-6" TD. HEIGHT CLEAR 4'-6" TD. OTIONAL OTIONAL BUMER BUMER OTIONAL BUMER AFETY CUHION AFETY NOINGCUHION NOING ATENDED HONEYCOMB ATENDED EXTRUION HONEYCOMB ROVIDED EXTRUION VERTICAL & ROVIDED HORIZONTAL VERTICAL TRENGTH & HORIZONTAL TRENGTH DURABLE LATIC FACING DURABLE LATIC FACING ] [ ] [ ] CAM LIFT HARDWARE 90 X 90 Cam Lift Hardware 90 x 90 (1 1/2" RIE I TANDARD) (1-1/2 WHERE REQUIRED, rise ECIFY is standard) ALTERNATE RIE CAM Where 3/4"[ required, ] DEE EAT CAM[ specify ] CAM HARDWARE FACTORY ALIGNED AND REINNED. alternate UE MOUNTING rise GUIDE FOR cam ROER 3/4 INTALLATION or deep seat cam. Cam hardware is factory aligned and pre-pinned. WINDOW (DOUBLE-GLAZED): OLYCARBONATE - 1/8" THICK, FLUH MOUNTED: 7 1/2" x 10 1/2" [ ] 16" x 18" [ ] 11 1/2" x 15 1/2" [ ] 24" x 24" [ ] "C" FRAME [UDA ALICATION] - 1/4" INGLE ANE 22" x 14" [ ] 22" x 20" [ ] 1/2" FLOOR CLEARANCE ELEVATION OF DOOR 1/2" FLOOR TANDARD FEATURE CLEARANCE TANDARD - MANUFACTURED FEATURE TO ELEVATION FIT OENING OF (+0",-1/8" DOORTOLERANCE) - MANUFACTURED - 14" X 16" TANDARD TO FIT VIION OENING ANEL (+0",-1/8" EACH TOLERANCE) LEAF - 14" - FULL X 16" ERIMETER TANDARD EAL VIION ANEL EACH LEAF - FULL - 3/4" ERIMETER RIE HARDWARE EAL - 3/4" - ERMANENT RIE HARDWARE COLOR FACING - ECIFY COLOR - ERMANENT - BOTTOM CAM COLOR HIELD/A.B.. FACING - ECIFY LATICCOLOR - BOTTOM - AFETY CAM CUHION HIELD/A.B.. NOINGLATIC - AFETY - HOLD CUHION OEN IN NOING /16" OVERALL DOOR THICKNE - HOLD OEN IN /16" OTIONAL OVERALL EXTRA: DOOR THICKNE Call toll free or visit us online: ROLLER ROLLER INTERNAL CONTRUCTION INTERNAL CONTRUCTION FOLLOWER FOLLOWER BOTTOM BOTTOM "V" CAM "V" CAM.com CAM LIFT HARDWARE 90 X 90 CAM (3/4" LIFT RIE HARDWARE I TANDARD) 90 X 90 WHERE REQUIRED, (3/4" ECIFY RIE I TANDARD) ALTERNATE RIE CAM WHERE REQUIRED, 1 1/2"[ ECIFY ] DEE EAT ALTERNATE CAM[ ] RIE CAM 13

14 HD-175 Industrial lants Food rocessing lants harmaceutical and Medical Facilities Retail tores upermarkets Walk-In Coolers The Aleco ImpacDor HD-175 is a rugged multiuse single piece polyethylene molded door body with stainless steel hinges and mounting hardware for high performance and low maintenance. The Aleco ImpacDor HD-175 attractive, rotationally molded polyethylene panels and corrosion-resistant hardware ensure minimal upkeep and maximum performance. Monolithic door panels resist moisture, chemicals, dust, bending and torque. The HD-175 features a 50% greater shell thickness than competitive models. The shell thickens towards the spine and leading edges to maintain strength and resist fatigue from cart or lift truck impacts. A steel tube strengthens and stabilizes the spine edge, plus the entire door is injected with urethane foam to add rigidity, dampen noise and an R-value of 12. Unique 250 degree hinge The HD-175 low-wear helical hinge provides a simple, easily maintained gravity hinge design. Its precision aluminum follower travels smoothly over a wide bearing area to evenly distribute load while significantly reducing wear without problematic roller bearings. Hinge and supporting hardware are all corrosion-resistant materials. Helical Hinge Lifetime WARRANTY (Limited warranty. Contact your Aleco representative for details.) Helical hinge 250 degree swing 14

15 + + + HD-175 HD-175 Features: Full thickness 1-3/4 (44mm) insulated construction One-piece molded polyethylene shell resists penetration by moisture, dust and chemicals 50% more shell thickness at impact areas than other comparable doors Unique corrosion resistant helical hinge allows for up to 125 degrees swing in both directions tainless steel mounting hardware Industrial grade steel bracing the length of the door s spine Options: Choice of decorative colors: Cloud Gray, Charcoal Gray, Black, Chocolate, Beige, Red, White and Royal Blue Molded polyethylene bumpers from 12 to 48 tall AB & stainless steel pad style impact wear panels any height up to 48 Vision panels in various sizes and style Transom panels for doors larger than 8 high Washdown package Mounting Hardware HEIGHT CLEAR HD-175 Door pecifications 4' TD HEIGHT CLEAR 4' TD WIDTH 3 4 " CAM RIE NUMBER OF AIR: WIDTH 3 4 " CAM RIE CLEAR 2" CLEARANCE CLEAR 2" CLEARANCE " ROTO MOLDED DOOR QUANTUM HIGH DENITY ERIMETER OLYURETHANE ROTO AIR EAL MOLDED DOOR FOAM CORE CRO LINKED HIGH DENITY ERIMETER HD OLYETHYLENE OLYURETHANE AIR EAL MOLDED DOOR BODY FOAM CORE INTERNAL BOX TEEL TILE ECTION A - A CRO LINKED HIGH DENITY HD OLYETHYLENE OLYURETHANE MOLDED DOOR BODY FOAM CORE INTERNAL BOX TEEL TILE THREADED TAINLE CRO LINKED TEEL HD OLYETHYLENE HAFT A'Y HIGH DENITY MOLDED DOOR BODY OLYURETHANE HIGH DENITY OLYURETHANE FOAM CORE FOAM CORE THREADED TAINLE THREADED CRO LINKED TEEL TAINLE INTERNAL BOX HD OLYETHYLENE CRO LINKED HAFT TEEL A'Y MOLDED HD OLYETHYLENE DOOR BODY HAFT A'Y TEEL TILE MOLDED DOOR BODY DOUBLE ANE OLYCARBONATE INTERNAL BOX WINDOW TEEL INTERNAL TILEBOX TEEL TILE DOUBLE ANE OLYCARBONATE DOUBLE ANE OLYCARBONATE WINDOW WINDOW Helical hinge with 250 swing 1" FLOOR CLEARANCE ELEVATION OF DOOR 1" FLOOR CLEARANCE ELEVATION OF DOOR - ATENTED HELICAL CAM OERATING HARDWARE TANDARD FEATURE (CORROION ROOF) - TAINLE - ATENTED TEEL HELICAL MOUNTING CAM OERATING HARDWARE HARDWARE (CORROION ROOF) - TAINLE TEEL MOUNTING HARDWARE Call toll free - 18" X 22" VIION ANEL (14" X 22" ON or DOOR visit us online: - FULLY INULATED, 1 3/4" THK DOOR BODY W/ 2 1/4" TILE - 18" X 22" VIION ANEL (14" X 22" ON DOOR LE THAN 30") - UDA AROVED OLYETHYLENE DOOR BODY - FULL ERIMETER AIR EAL INTERNAL CONTRUCTION INTERNAL CONTRUCTION TEFLON HARD COATED ALUM. CAM FOLLOWER TEFLON HARD COATED ALUM. CAM FOLLOWER.com "Ø (6 LC.) FOR ATTACHMENT (2) HEADER (4) JAMB 7 16 "Ø (6 LC.) FOR ATTACHMENT (2) HEADER (4) JAMB TAINLE TEEL HINGE BRACKET TAINLE TEEL HINGE BRACKET DOOR ADJUTMENT ET CREW DOOR ADJUTMENT

16 XHD-175 Manufacturing Facilities Cold torage and Warehouses Food rocessing lants The Aleco ImpacDor XHD-175 is a continuously welded aluminum sub-frame with large vision panels and high bumpers allowing excellent visibility and maximum durability. The Aleco ImpacDor XHD- 175 is a multi-faceted door capable of filling the needs of a wide variety of applications. From oversized openings, to washdown, UDA, security and refrigerated applications, the XHD-175 is able to withstand the daily rigors of all types of traffic. A rugged and dependable performer, the XHD-175 is resistant to impact abuse by carts, pallets, hand trucks and medium fork lift traffic. Engineered to be rugged, durable and stable The Aleco ImpacDor XHD-175 has a tubular aluminum frame welded to an aluminum stile which acts as the rugged backbone. This strong yet lightweight frame provides excellent dimensional stability. In large openings where slab and molded doors will warp and lose their ability to effectively separate two environments, the XHD-175 retains its shape and seal. Custom made to exact size Most Aleco ImpacDor XHD-175 doors are custom made to suit your application within 1/8 of opening size up to 8 wide and 10 high. Transoms or dutch doors are suggested for openings higher than ten feet. Cast Meehanite Cam Follower ealed Roller Bearing Cast Meehanite V-Cam High trength teel Tubing Extruded Aluminum Bottom Bearing V-Cam Hinge Lifetime WARRANTY (Limited warranty. Contact your Aleco representative for details.) 16

17 + + + XHD-175 XHD-175 Features: Welded aluminum sub-frame 24 high full-view windows Full thickness 1-3/4 high foam insulated construction 42 high polyethylene bumpers Rigid, full-length aluminum mount and steel spine Meets UDA guidelines ealed bearing corrosion resistant V-cam hardware with 1-1/2 rise cam TANDARD MODEL Options: HEAVY DUTY VINYL MOUNT AEMBLY Choice of decorative OR RUBBER FACING colors: Cloud Gray, Charcoal Gray, Black, Chocolate, Cocoa, Burgundy, Beige, Red, NEORENE Green, IMREGNATED White, INULATION pangled Galvanized, Cadet Blue and TILE Royal Blue ECTION "AA" JAMB AIR EAL Molded spring bumpers from 12 to 48 tall AFETY CUHION AB Impact NOINGpanels up to 48 tall ATENDED Cam HONEYCOMB swing (90 x90 standard) EXTRUION ROVIDED VERTICAL 90 x & HORIZONTAL 135 and 90 x 180 TRENGTH 8-3/4 jamb guard with cutouts NEORENE IMREGNATED INULATION Washdown package AFETY CUHION NOING For pressure and wind loads: TOUGH, FLEXIBLE VINYL Adjustable spring compensator FACING (ROTOCURED RUBBER FACING OTIONAL) Top mounted compression springnumber OF AIR: EXCLUIVE TRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER) XHD-175 Door pecifications WIDTH 1 1/2" FOR CAM RIE CLEAR OLY-KOR XHD MODEL AFETY CUHION AFETY CUHION NOING NOING NOE AIR EAL NOE AIR EAL AB FACING AB FACING OR GALVANIZED OR GALVANIZED ALUMINUM TUBE FRAME ALUMINUM TUBE FRAME ALUMINUM MOUNT ALUMINUM MOUNT AEMBLY AEMBLY INTERNAL CONTRUCTION Mounting Hardware ROLLER FOLLOWER BOTTOM FLEIBLE, FLEIBLE, OLYMER OLYMER FOAM INULATION FOAM INULATION ALUMINUM ALUMINUM TUBE FRAME TUBE FRAME ALUMINUM ALUMINUM TILE TILE JAMB AIR EAL JAMB AIR EAL ECTION ECTION "AA" "AA" INTERNAL INTERNAL CONTRUCTION ATENTED ATENTED HONEYCOMB HONEYCOMB EXTRUION ROVIDE VERTICAL EXTRUION & HORIZONTAL ROVIDE TRENGTH VERTICAL & HORIZONTAL TRENGTH AFETY CUHION AFETY CUHION NOING NOING FULL ERIMETER RIVET FULL ERIMETER RIVET ] [ ] [ ] [ ] [ ] [ ] CAM LIFT HARDWARE 90 X 90 Cam Lift Hardware 90 x 90 (1 1/2" RIE I TANDARD) (1-1/2 WHERE REQUIRED, rise ECIFY is standard) ALTERNATE RIE CAM Where 3/4"[ required, ] DEE EAT CAM[ specify ] CAM HARDWARE FACTORY ALIGNED AND REINNED. alternate UE MOUNTING rise GUIDE FOR cam ROER 3/4 INTALLATION or deep seat cam. Cam hardware is factory aligned and pre-pinned. WINDOW (DOUBLE-GLAZED): OLYCARBONATE - 1/8" THICK, FLUH MOUNTED: 7 1/2" x 10 1/2" [ ] 16" x 18" [ ] 11 1/2" x 15 1/2" [ ] 24" x 24" [ ] "V" CAM "C" FRAME [UDA ALICATION] - 1/4" INGLE ANE 22" x 14" [ ] 22" x 20" [ ] 22" x 32" [ ] FOR REURE AND WIND LOAD: [ ] ADJUTABLE RING COMENATOR [ ] COMREION RING HEIGHT CLEAR 3'-10" TD. 1/2" FLOOR CLEARANCE ELEVATION OF DOOR TANDARD FEATURE - FULLY INULATED, 1 13/16" OVERALL DOOR THICKNE - 24" FULL WIDTH VIION ANEL EACH LEAF - FULL ERIMETER EAL - 42" - INTERNAL CCR RUBBER ALUMINUM BUMER FRAMEWORK (OLYETHYLENE FOR UDA) - TO & BOTTOM CAM HIELD/A.B.. LATIC - AFETY CUHION NOING - INTERNAL ALUMINUM FRAMEWORK - FULL - C649 ERIMETER JAMB GUARD RIVET Call toll free or visit us online: FLEIBLE, OLYMER FOAM FLEIBLE, INULATION OLYMER FOAM INULATION MOUNTING HARDWARE MOUNTING HARDWARE ROLLER FOLLOWER.com "V" CAM AB FACING OR GALVANIZED AB FACING OR GALVANIZED INTERNAL WELDED ALUMINUM TUBE FRAME BOTTOM 17 INTERNAL WELDED ALUMINUM TUBE FRAME

18 AI-175 Manufacturing Facilities Cold torage and Warehouses Food rocessing lants Retail tores The Aleco ImpacDor AI-175 is the industry standard featuring a full thickness, flexible design for punishing applications. The unique pliable construction flexes to absorb impact. The Aleco ImpacDor AI-175 s innovative construction with rubber I-beams bonded to flexible vinyl facings ensures flexibility at impact and the memory to return to its original shape. Rubber I-beam extrusions, steel spine and aluminum mount assembly add strength at the door s perimeters and prevent breakdown at the hinge and bearing areas. Tough, versatile door solutions The Aleco ImpacDor AI-175 is ideal for any doorway that faces frequent motorized traffic, but is also light and responsive enough for carts and walkthrough personnel. Flexible foam insulation, double-loop nosing and blade air seals resist heat, dust and sound transfer. With clean aesthetics and well-engineered details, the AI-175 can be installed in retail applications with confidence. Custom made to exact size Most Aleco ImpacDor AI-175 doors are custom made to suit your application within 1/8 of opening size up to 8 wide and 10 high. Transoms or dutch doors are suggested for openings higher than ten feet. Cast Meehanite Cam Follower ealed Roller Bearing Cast Meehanite V-Cam High trength teel Tubing Extruded Aluminum Bottom Bearing V-Cam Hinge Lifetime WARRANTY (Limited warranty. Contact your Aleco representative for details.) 18

19 + + + AI-175 AI-175 Features: Flexible rubber sub-frame Fabric reinforced vinyl facings in multiple colors Heavy duty V-cam hinges Full thickness 1-13/16 (46mm) insulated construction Full height mount assembly Up to 10 (3048mm) wide by 12 (3658mm) high 48 impact panels Bottom bearing lower hinge Full perimeter air seal Options: Choice of decorative colors: Cloud Gray, Charcoal Gray, Black, Chocolate, Cocoa, Burgundy, Beige, Red, pangled Galvanized and Cadet Blue Molded spring bumpers from 12 to 48 tall AB Impact panels up to 48 tall Cam swing (90 x 90 standard) 90 x 135 and 90 x /4 jamb guard with cutouts Washdown package For pressure and wind loads: Adjustable spring compensator Top mounted compression spring NUMBER OF AIR: NUMBER OF AIR: Mounting Hardware ROLLER FOLLOWER "V" CAM BOTTOM Cam Lift Hardware 90 x 90 (1-1/2 rise is standard) Where required, specify alternate rise cam 3/4 or deep seat cam. Cam hardware is factory aligned and pre-pinned. Use mounting guide for proper installation. HEIGHT CLEAR 4'-6" TD. AI-175 Door pecifications HEIGHT CLEAR HEIGHT CLEAR 4'-6" TD. 4'-6" TD. WIDTH CLEAR 1 1/2" WIDTH FOR CLEAR CAM 1 1/2" RIE FOR WIDTH CAM RIECLEAR 1 1/2" FOR CAM RIE 1/2" FLOOR 1/2" CLEARANCE FLOOR CLEARANCE ELEVATION OF DOOR TANDARD FEATURE ELEVATION OF DOOR 1/2" FLOOR - FULLY INULATED, CLEARANCE 1 13/16" OVERALL DOOR THICKNE - 14" X 16" RECTANGULAR ELEVATION VIION OF DOOR ANEL EACH LEAF - FULL ERIMETER EAL TANDARD - 48" FEATURE WRA AROUND WEAR ANEL Call toll - FULLY free INULATED, - TO & BOTTOM 1 13/16" CAM OVERALL HIELD/A.B.. DOOR LATIC THICKNE or visit us online: - 14" X 16" - AFETY RECTANGULAR CUHION VIION NOING ANEL EACH LEAF - FULL ERIMETER - MANUFACTURED EAL TO FIT OENING (+0",-1/8" TOLERANCE) - 48" WRA - 1 AROUND 1/2" RIE V-CAM WEAR ANEL HARDWARE - TO & BOTTOM - HOLD OEN CAM IN HIELD/A.B.. LATIC TANDARD MODEL TANDARD MODEL AFETY CUHION NOING AFETY CUHION NOING HEAVY DUTY VINYL OR RUBBER FACING NEORENE IMREGNATED INULATION NEORENE IMREGNATED INULATION ECTION "AA" AFETY CUHION NOING ATENDED HONEYCOMB AFETY CUHION EXTRUION ROVIDED NOING VERTICAL & HORIZONTAL TRENGTH ATENDED HONEYCOMB EXTRUION VERTICAL NEORENE ROVIDED IMREGNATED & HORIZONTAL TRENGTH INULATION NEORENE IMREGNATED INULATION HEAVY DUTY VINYL OR RUBBER FACING ECTION "AA" INTERNAL FOLLOWER CONTRUCTION FOLLOWER BOTTOM BOTTOM ROLLER FOLLOWER ROLLER BOTTOM ROLLER.com TILE "V" CAM CAM LIFT HARDWARE 90 X 90 MOUNT AEMBLY JAMB AIR EAL TILE EXCLUIVE TRUCTURAL RUBBER " I " BEAM REINFORCING INTERNAL CONTRUCTION(8" ON CENTER) "V" CAM (1 1/2" RIE I TANDARD) MOUNT AEMBLY JAMB AIR EAL TOUGH, FLEXIBLE VINYL FACING (ROTOCURED RUBBER FACING OTIONAL) TOUGH, FLEXIBLE VINYL EXCLUIVE TRUCTURAL FACING RUBBER " (ROTOCURED I " BEAM RUBBER REINFORCING FACING OTIONAL) (8" ON CENTER) 19

20 AI-XHD Manufacturing Facilities Cold torage and Warehouses Food rocessing lants The Aleco ImpacDor AI-XHD features two flexible internal strengthening members and two additional full length layers of reinforced vinyl along the spine to resist breakdown yet retain flexibility. The Aleco ImpacDor AI-XHD is necessary where wider loads, narrower doors or turning traffic puts extra demands on the door. The AI-XHD is the AI-175 standard door LU more - two flexible internal beams that strengthen the door and two layers of flexible vinyl mount reinforcement.the extra thickness of the door combined with an all-steel mount/spine assembly resists breakdown yet retains flexibility across the whole door panel. Tough, versatile door solutions The Aleco ImpacDor AI-XHD is ideal for any doorway that faces frequent motorized traffic, but is also light and responsive enough for carts and walk-through personnel. Flexible foam insulation, double-loop nosing and blade air seals resist heat, dust and sound transfer. With clean aesthetics and well-engineered details, the AI-XHD can be installed in retail applications with confidence. Custom made to exact size Most Aleco ImpacDor AI-XHD doors are custom made to suit your application within 1/8 of opening size up to 8 wide and 10 high. Transoms or dutch doors are suggested for openings higher than ten feet. Cast Meehanite Cam Follower ealed Roller Bearing Cast Meehanite V-Cam High trength teel Tubing Extruded Aluminum Bottom Bearing V-Cam Hinge Lifetime WARRANTY (Limited warranty. Contact your Aleco representative for details.) 20

21 + + + AI-XHD AI-XHD Features: Flexible rubber sub-frame with reinforced wood stile braces Two extra layers of flexible vinyl mount reinforcement facings in multiple colors Heavy duty V-cam hinges Full thickness 1-13/16 (46mm) insulated construction teel spine and full height mount assembly Up to 10 (3048mm) wide by 12 (3658mm) high 48 impact panels Bottom bearing lower hinge Full perimeter air seal Options: Choice of decorative colors: Cloud Gray, Charcoal Gray, Black, Chocolate, Cocoa, Burgundy, Beige, Red, pangled Galvanized and Cadet Blue Molded spring bumpers from 12 to 48 tall AB Impact panels up to 48 tall Cam swing (90 x 90 standard) 90 x 135 and 90 x /4 jamb guard with cutouts Washdown package For pressure and wind loads: Adjustable spring compensator Top mounted compression spring Mounting Hardware ROLLER FOLLOWER "V" CAM BOTTOM Cam Lift Hardware 90 x 90 (1-1/2 rise is standard) Where required, specify alternate rise cam 3/4 or deep seat cam. Cam hardware is factory aligned and pre-pinned. AI-XHD Door pecifications WIDTH CLEAR NUMBER OF AIR: 1 1/2" FOR NUMBER OF AIR: CAM RIE WIDTH CLEAR CAM 1 1/2" WIDTH RIE FOR CLEAR 1 1/2" FOR CAM RIE HEIGHT CLEAR HEIGHT HEIGHT CLEAR 4'-6" TD. CLEAR 4'-6" 4'-6" TD. TD. 1/2" FLOOR 1/2" CLEARANCE FLOOR 1/2" CLEARANCE FLOOR CLEARANCE ELEVATION OF DOOR TANDARD FEATURE (XHD ELEVATION FEATURE OF DOOR IN BOLD FACE) TANDARD - FULLY INULATED, FEATURE 1 (XHD 13/16" FEATURE OVERALL IN DOOR BOLD THICKNE FACE) - FULLY - 14" X INULATED, 16" RECTANGULAR 1 13/16" VIION OVERALL ANEL DOOR EACH THICKNE LEAF - 14" - FULL X 16" ERIMETER RECTANGULAR EALVIION ANEL EACH LEAF Call toll free - FULL - TO ERIMETER & BOTTOM EAL CAM HIELD/A.B.. LATIC or visit us online: - TO - AFETY & BOTTOM CUHION CAM NOING HIELD/A.B.. LATIC - AFETY - 1 1/2" CUHION RIE V-CAM NOING HARDWARE - 1-1/2" HOLD RIE OEN V-CAM IN HARDWARE - HOLD - 48" FLEX OEN HIELD IN TANDARD XHD MODEL TANDARD XHD MODEL AFETY CUHION NOING AFETY CUHION NOING ROLLER ROLLER NOE AIR EAL HEAVY DUTY VINYL NOE AIR EAL OR RUBBER FACING HEAVY DUTY VINYL OR RUBBER FACING NEORENE IMREGNATED INULATION NEORENE IMREGNATED INULATION ECTION "AA".com TILE "V" CAM CAM LIFT HARDWARE 90 X 90 TILE JAMB AIR EAL ECTION "AA" JAMB AIR EAL INTERNAL CONTRUCTION AFETY CUHION NOING INTERNAL CONTRUCTION AFETY CUHION ATENTED HONEYCOMB NOING EXTRUION ROVIDE ATENTED VERTICAL HONEYCOMB & HORIZONTAL EXTRUION TRENGTHROVIDE VERTICAL & HORIZONTAL TRENGTH NEORENE IMREGNATED INULATION REILIENT INTERNAL NEORENE BACK TRI IMREGNATED INULATION REILIENT FLEXIBLE INTERNAL EXTERNAL BACK BACK TRI TRI FLEXIBLE EXTERNAL BACK TRI TEEL MOUNTING TEEL MOUNTING MOUNTING HARDWARE MOUNTING HARDWARE FOLLOWER FOLLOWER BOTTOM BOTTOM "V" CAM 21 TEEL MOUNT AEMBLY TEEL MOUNT AEMBLY TOUGH, FLEXIBLE VINYL FACING TOUGH, (ROTOCURED FLEXIBLERUBBER VINYL FACING FACING OTIONAL) (ROTOCURED RUBBER FACING OTIONAL) EXCLUIVE TRUCTURAL RUBBER " I " BEAM EXCLUIVE REINFORCING TRUCTURAL RUBBER (8" ON " I CENTER) " BEAM REINFORCING (8" ON CENTER)

22 TM teel-lite Manufacturing Facilities Cold torage and Warehouses Food rocessing lants The Aleco ImpacDor teel-lite TM is a heavy duty steel-faced door designed to exceed stringent U standards for durability and penetrability. The Aleco ImpacDor teel-lite TM s fire, vandal and shockresistant design offers a high level of security in a multitude of applications. A fully welded steel sub-frame supports facings of 16 gauge galvanized steel. Heavy duty bumpers, cane bolts, window bars and more add security muscle. Full gaskets seal off temperature, sound and dust intrusion. roven cast Meehanite V-Cam hinges with sealed bearings deliver smooth 180 swing. Meets U ostal RE-5 ecurity pecs Designed to U ostal ervice security specifications, the Aleco ImpacDor teel-lite TM incorporates the most technologically advanced materials and manufacturing methods. Extremely lightweight yet tough and shock absorbing, the TEEL-LITE TM offers an ease of operation never before associated with postal doors. teel-lite TM manufactured to fit teel-lite TM doors are custom manufactured to fit most finished opening dimensions to insure proper operational tolerances and to protect against air infiltration per ATM E teel-lite TM doors may be used with automatic operators. Cast Meehanite Cam Follower ealed Roller Bearing Cast Meehanite V-Cam High trength teel Tubing Extruded Aluminum Bottom Bearing V-Cam Hinge Lifetime WARRANTY (Limited warranty. Contact your Aleco representative for details.) 22

23 + + + teel-lite TM teel-lite TM Features: Continuous welded steel sub-frame Fully insulated foam core 16 galvanized steel door facings and cam shields Detention grade low inertia hardware, combination bottom bearing/jamb guard and tamper-proof fasteners 38 high impact, low friction factory installed bumpers teel cane bolts (top/bottom) 1/8 thick, double-glazed vision panels are U.L. listed as burglary resistant. Equipped with 5/8 diameter steel security rods Full perimeter air seals Hold open pins Options: Washdown package Fire, Vandal and hock-resistant! teel-lite TM Door pecifications Mounting Hardware ROLLER FOLLOWER BOTTOM "V" CAM 3/4 (19mm) Rise V-Cam with ecurity Fasteners Full length aluminum mount Call toll free or visit us online:.com 23

24 COLOR OTION white black royal blue cadet blue red charcoal gray cloud gray cocoa chocolate beige green burgundy Note: Colors shown are mechanically reproduced. They may vary from the actual product. lease request actual product sample for true color representation. Not all doors are available in all colors. lease check with your Aleco representative for details. 24

25 hardware, jamb guards, bumpers & Impact anels Top Mount Hardware tandard: 90/90 wing Optional: 90/125 wing V-Cam Hinge Configurations available on the following doors: FD-175 AI-XHD XHD-175 teel-lite TM AI-175 Optional: 90/180 wing Jamb Guards 8 3/4 tandard: 8 3/4 Zinc lated Jamb Guard for EZ Hinge Hardware Teardrop Bumpers Optional: 8 3/4 Jamb Guard for V-Cam Hardware (1/4 teel) (required for adjustable spring compensator) AB Impact anel (AB-faced doors only) Optional: 8 3/4 Jamb Guard required for 90/180 V-Cam Hardware (1/4 teel) door mount vinyl or AB molded polyethylene Bumpers and impact panels not available on all door models. More options available for hardware, jamb guards, bumpers and impact panels. Ask Aleco rep for more details. 25

26 Jettream Air Curtain The Aleco Energy-aving Jettream produces a high-speed air barrier, dividing areas into two independent temperature zones. Levels of interior air conditioning/ heating are maintained, increasing comfort and saving energy. revents loss of cool or warm air teel cabinet with durable beige baked enamel finish or stainless steel Dust and insect-control rotects against entry of smoke and noxious fumes Available in 36, 42, 48 and 60 models Low 8.5 projection Easy to Install hardware All metal blowers Applications: Cold torage Facilities Restaurants Warehouse/Distribution Centers Food rocessing lants Loading Docks upermarkets Commercial Front Door Entrances Hospitals Retail tores Bakeries Fast Food Restaurants Coolers/Freezers Available in tainless teel 26

27 Aleco Jettream Features: 3-position switch (off/high/low) Available in beige baked enamel finish or stainless steel UL listed Adjustable airflow with directional plenum Bracket for mounting 5 ft. long 110v prewired grounded plug For cooler/freezer use, mount on warm side Effective up to 8 ft. heights Not recommended for outdoor use Unit pecifications ENAMEL COATED MODEL TECHNICAL ECIFICATION MOTOR ECIFICATION Unit ize Volt/Freq Input ower (W) Avg. Air Max Air Air Vol. (cfm) Noise (db) Net Weight Current ower art Number RM Horsepower (L x W x H) (V/Hz) Hi Lo Velocity Velocity Hi Lo Hi Lo (lbs) (A) (KW) " x 8.5" x 10" " x 8.5" x 10" / FM 2560 FM " x 8.5" x 10" " x 8.5" x 10" TAINLE TEEL MODEL TECHNICAL ECIFICATION Unit ize Volt/Freq Input ower (W) Avg. Air Max Air Air Vol. (cfm) Noise (db) Net Weight art Number (L x W x H) (V/Hz) Hi Lo Velocity Velocity Hi Lo Hi Lo (lbs) " x 8.5" x 10" ~ " x 8.5" x 10" / FM 3150 FM " x 8.5" x 10" " x 8.5" x 10" NOTE: Two units may be wired together for wider openings. Current (A) MOTOR ECIFICATION ower (KW) RM One year warranty Call for details Horsepower AIR CURTAIN DIMENION art Number A B C D E F G H I J " 11 7/16" 22" " 11 7/16" 22" 1 3/16" " 17" 10 5/8" 17" 2" 5 13/16" 10 1/8" 8 1/2" 5 1/4" " 22 7/16" 10 5/8" 22 7/16" A I H FRONT B C D E B J F G IDE Optional plunger switch for door activation is available BACK (mounting plate is shaded portion) 27

28 INNOVATIVE WORKLACE OLUTION TRI DOOR Complete Doors and Kits MaxBullet trip Door Hardware cratch-guard Ribbed Material Hi-Viz afety roducts Bulk VC Rolls MaxMagic Bulk Roll Template Kit Truck Doors & Curtains Insect Barriers Replacement VC trips Aleco TearAway VC trips IMACDOR Industrial & Food ervice Replacement VC anels INDUTRIAL ARTITION & CURTAIN liding artitions Custom Enclosures JETTREAM AIR CURTAIN AN RACK COVER FLOOR ROTECTION RODUCT Runner Chairmats /N E. Avalon Ave. Muscle hoals, AL h / (800) (256) Fax / (800) (256)