Tractors ATOS

Transcription

1 Tractors ATOS

2 The ATOS. One of the family ATOS 300 / 200 They say you can't choose your family. Now you can! Its output precisely tailored to your requirements. Its operating system straight down the line, without gimmicks. Its driving experience a real CLAAS. It fits into our family and yours. The ATOS. As versatile as you. Tractors up to 140 hp. CLAAS offers a choice of four model ranges in this segment, with just the right specifications to meet your requirements: from simple technology for everyday work right through to automatic functions for intensive use. The ELIOS, ATOS, AXOS and ARION 400 tractors offer an generous selection of practical, well-engineered equipment options to make your life easier. An impressive line-up. Discover the whole range on our website. claas.com atos.claas.com 2 3

3 ATOS Contents Innovations 6 CLAAS POWER SYSTEMS 8 Engine 10 Transmission 14 Construction 16 Hydraulics 18 Rear linkage, PTO 20 Front linkage 22 Front loaders 24 Comfort 26 Cab 28 Right-hand control panel 30 Left-hand control panel 32 SMART STOP, dynamic steering 34 Operator assistance systems 36 Maintenance 38 CLAAS Service & Parts 40 Features 42 Specifications

4 NEW A solid basis. Innovations NEW: more power. NEW: more precision. NEW: even more possibilities. NEW: more manoeuvrability. New top model: the ATOS 350 with 113 hp and 435 Nm Three 4-cylinder models with outputs of 88, 102 and 113 hp (compliant with ECE R 120) Three 3-cylinder models with outputs of 75, 88 and 97 hp (compliant with ECE R 120) Two engine speed memories: Precise engine and PTO speed Rapid speed change, e.g. when manoeuvring on the headland Reduces fuel consumption and protects implements from too high speeds 4- or 5-speed manual transmission TRISHIFT with 3 powershift speeds or TWINSHIFT with 2 powershift speeds Mechanical reversing function or REVERSHIFT electrohydraulic clutchless reverser SMART STOP: stop with the brake pedal without using the clutch Dynamic steering for all models: For quicker steering response The higher steering ratio means that fewer turns of the steering wheel are needed NEW: more hydraulic power. NEW: more versatility. NEW: more comfort. NEW: even easier to maintain. 55-l/min hydraulic system 60-l/min ECO hydraulic system achieves maximum flow rate at 1,600 rpm, available for the ATOS 200 New: 90-l/min hydraulic system for the ATOS 300 Up to four spool valves The new front linkage: Maximum lifting capacity of 2.9 t Improved integration More ground clearance New hydrosilent blocks for the cab suspension: Reduces bumps and jolts Minimises vibrations in the cab Makes for an even more comfortable ride Battery located under the right-hand access steps for easier access Supplied with an air nozzle to make light work of cleaning the cooling units 6 7

5 CPS CLAAS POWER SYSTEMS. CLAAS POWER SYSTEMS Our drive system: the perfect interplay between optimal components. A CLAAS machine is much more than the sum of its individual parts. Top performance is only possible when all the parts are ideally matched and work together optimally. In CLAAS POWER SYSTEMS (CPS), we have brought together top-quality components to create an intelligent drive system that sets new standards. Full engine output only when it is required. Drives that are suited to the way the machines are used. Fuel-saving technology which quickly pays off. 8 9

6 Strong performers. Engine Two engines. Six models. The ATOS 300 model range has a 4-cylinder Farmotion engine with 3.8 l cubic capacity while the ATOS 200 range has a 3-cylinder Farmotion engine with 2.9 l cubic capacity. Incorporating cutting-edge technology, they both deliver impressive amounts of power with excellent fuel economy. Overlapping output values enable you to choose exactly the right engine to meet your needs: ATOS Rated output (hp) ECE R 120 Maximum output (hp) ECE R 120 Maximum torque (Nm) ECE R The 4-cylinder engine gives the ATOS 300 a longer wheelbase for greater stability during transport operations and power reserves for heavy draught and PTO work. ATOS 350 Nm hp The 3-cylinder engine makes the ATOS 200 lighter and more compact. Its smooth running and low fuel consumption during partial-load operation are particularly impressive hp MAX Compact dimensions Common rail injection (2,000 bar) Wastegate turbocharger Intercooler Meets emission standard Stage IIIB (Tier 4i) Emission control by diesel oxidation catalytic converter (DOC) and externally cooled exhaust gas recirculation (EGR) Fixed-speed or viscous engine fan rpm Values compliant with ECE R 120 ATOS 240 Nm hp hp MAX rpm Values compliant with ECE R

7 Cleaning up. Engine Stage IIIB (Tier 4i). The ATOS complies with the Stage IIIB emissions standard. The introduction of this standard means a significant reduction in pollutant emissions. Low emissions thanks to DOC and intelligent exhaust gas recirculation. DOC stands for diesel oxidation catalytic converter. In the DOC environmentally harmful exhaust gas components such as hydrocarbons and carbon monoxide are oxidised, and therefore neutralised, with the residual oxygen content. The cooled external exhaust gas recirculation (EGR) system has an intelligent electronic control system which also regulates particulate and nitrogen oxide emissions on the basis of the current operating status. Fully integrated DOC. All the components of the exhaust gas aftertreatment system are housed under the bonnet, leaving a clear view from the cab. Clean and efficient. The ATOS complies with the Stage IIIB (Tier 4i) emissions standard without using urea. The diesel tank is conveniently located by the cab access steps and has a maximum capacity of 130 l in all models

8 Always in the right gear. Transmission The transmission options. The ATOS is available with three different transmission options, enabling you to adapt it to your individual requirements. Mechanical transmission Without powershift speeds Four 1 or five gears Chose between a mechanical reverser or the REVERSHIFT electrohydraulic clutchless reverser Two ranges for 10 forward and 10 reverse gears Maximum speed 30 or 40 km/h TWINSHIFT transmission Two powershift speeds Four 1 or five gears Chose between a mechanical reverser or the REVERSHIFT electronic clutchless reverser Two ranges for 20 forward and 20 reverse gears Maximum speed 40 km/h, 40 km/h ECO version also available TRISHIFT transmission Three powershift speeds Five gears Two ranges for 30 forward and 30 reverse gears REVERSHIFT clutchless reverser as standard Maximum speed 40 km/h ECO Three transmission options enable you to customise the ATOS to ensure that it meets your needs perfectly. The mechanical reverser and the electrohydraulic REVERSHIFT reverser are handily positioned to the left of the steering wheel. Two additional creep ranges are available for special applications, allowing minimum speeds from 230 m/h at nominal engine speed. The optional creep range doubles the number of gears. Thanks to the REVERSHIFT clutchless reverser, the clutch pedal is almost redundant: The SMART STOP function fitted with REVERSHIFT as standard allows you to manoeuvre and stop easily just using the service brake The clutch button on the shift lever offers numerous advantages, especially during transport work REVERSHIFT also enables you to change direction quickly and smoothly particularly important when working with a front loader The ECO version with 5-gear TWINSHIFT or TRISHIFT transmission reaches the top speed of 40 km/h at a lower engine speed. This has a positive effect on fuel consumption during transport operations. All ranges and gears are activated via two shift levers. A clutch button on the gear-shift lever can be used as an alternative to the foot clutch. With the REVERSHIFT clutchless reverser, the reversing progressivity is adjusted on the REVERSHIFT lever. 1 Four gears are available for the ATOS 200 only

9 CLAAS tractor concept for greater flexibility. Construction The CLAAS tractor concept. Large choice of tyres. The CLAAS tractor concept offers significant benefits which give you a clear competitive edge. The combination of a long wheelbase and optimum weight distribution with a compact overall length provides a high degree of versatility while maintaining distinct performance advantages. Long wheelbase and excellent weight distribution: High driving comfort Good and safe road handling More pulling power and performance as less ballast is required Greater stability for a higher lifting capacity Optimised fuel consumption Lower ballast requirement protects the soil and guarantees dynamic road transport Short overall length: Good manoeuvrability Short trailer combination on the road Good visibility Good guidance of front-mounted implements The ATOS can be fitted with rear tyres with a maximum diameter of 1.5 m and a maximum width of 540 mm. Thanks to the wide range of tyre options, the ATOS is capable of any type of work. Safe braking system. The brakes handle the low tare weight and high permissible gross weight with ease, guaranteeing maximum safety and stability. Many tyre options. The ATOS 340 and 230 are also available with rear-wheel drive and 30-km/h transmission. With small front wheels, both these ATOS models are extremely manoeuvrable even in the tightest of spaces

10 Keep up the pressure the hydraulics. Hydraulics Outstanding hydraulic performance. The basic specification for the ATOS 300 and 200 includes a hydraulic system with an output of 55 l/min, which can satisfy any requirement. The ATOS 200 can additionally be fitted with a 60-l/min ECO version which achieves the maximum flow rate at just 1,600 rpm. This significantly reduces the noise level and fuel consumption during intensive front loader work, for example. The optional 90-l/min hydraulic system delivers high flow rates to the spool valves, making the ATOS 300 a hydraulic powerhouse. Colour-coded connections. Hydraulic steering. Under control. The spool valves at the rear of the ATOS (up to four) are easy to connect. The coloured markings on the inlet and outlet sides make it easier to attach implements correctly. The steering has a dedicated, independent hydraulic pump. This ensures that the tractor is easy to handle, even when using implements with a high hydraulic power requirement. Up to four spool valves are available in total: Three mechanical spool valves Additional electronic spool valve (max. 25 l/min) 18 19

11 Lifts anything you like. Rear linkage PTO Up to 4.9 t lifting capacity. The ATOS 300 features an impressive maximum lifting capacity of 4.9 t, while the ATOS 200 achieves a convincing 4.5 t. You can choose a mechanical or an electronic rear linkage control system. The rear linkage equipment meets every requirement: Hooks or ball ends can be ordered (cat. II) Two powerful additional rams increase the lifting capacity Manual or automatic lower link stabilisers External controls for mechanical or electronic rear linkage The PTO speeds. Three PTO options are available with the ATOS so you're bound to find the right one for you: 540 rpm 540/540 ECO rpm 540/540 ECO/1,000/1,000 ECO rpm Ground speed PTO available for all configurations The ECO PTO reaches the required speed at a lower engine speed. This reduces fuel consumption and noise levels. Automatic PTO engagement/disengagement improves ease of operation when working with PTO-driven implements. A separate ground speed PTO for use with trailers is also available as an option. Electronic rear linkage combined with automatic PTO engagement/disengagement simplifies work on the headland. All you have to do is control the rear linkage and the rear PTO engages and disengages automatically. Intuitive control concept. 1 Dial for depth control of the rear linkage 2 Draught control 3 Lowering speed 4 Lift height limiter 5 Lower rear linkage 6 Raise rear linkage 7 Stop rear linkage To the right of the driver's seat there is another switch which enables you to operate the rear linkage when attaching implements. Switches on both rear mudguards to raise/lower the rear linkage and engage/disengage the PTO. A ground speed PTO is available for trailed implements with a drive axle. It is separate and mounted underneath the rear PTO. All PTO speeds are easily pre-selected using the controls to the left of the driver's seat

12 NEW Highly versatile. Front linkage NEW: fully integrated front linkage. Folding lower links. A fully integrated front linkage with a lift capacity of 2.9 t is available as a factory-fitted option for the ATOS. The integrated design of this front linkage combined with a short distance between the front axle and coupling points reduces the overhang with the front ballast or front mower and improves front implement guidance. The higher ground clearance makes it easier to drive across rows of crops or higher straw swaths even with the lower links retracted. The lower links fold in to reduce the vehicle length, giving the driver a better overview of the vehicle. Powerful front PTO. The front PTO runs at 1,000 rpm and opens up a wide range of potential applications. PTO engagement/disengagement. The front and rear PTO can be engaged and disengaged electronically using the switch which is conveniently located on the right-hand control panel. 1 Electronic PTO engagement/disengagement, front 2 Electronic PTO engagement/disengagement, rear 22 23

13 A perfect fit. CLAAS front loaders. Front loaders The control system. Two front loader control systems available factory-fitted: PROPILOT (single-lever control via Bowden cables) FLEXPILOT (single-lever control via hydraulically pilot-controlled valves) The benefits for you. The 60 l/min ECO or 90-l/min hydraulic system minimises fuel consumption and is highly responsive during front loader work REVERSHIFT is ideal for front loader work involving frequent changes in direction Superb visibility with the transparent sunroof No compromises. Even in front loader work. For front loaders in particular, the connection to the tractor is extremely important in order to guarantee safe, fast loading operations. When developing the ATOS model range, it was therefore very important for the attachment brackets to be fully integrated into the complete tractor concept. The brackets are positioned a long way back, providing stability during heavy work. The design of the attachment bracket means that a CLAAS front loader can easily be retrofitted at a later date. Strong plus points. Front loader brackets and controls can be factory-fitted Two convenient control options to choose from: PROPILOT and FLEXPILOT PCH hydraulic self-levelling linkage on FL front loaders or mechanical self-levelling linkage on FL C and FL E models FASTLOCK hydraulic locking for implements SPEEDLINK for automatic locking and connection of all hydraulic and electric connectors on the implement SHOCK ELIMINATOR for vibration damping Wide selection of attachments And not forgetting the full CLAAS service ATOS FL FL C FL E , , , , , 80 40, 60, 80 40, , 60 40, , 60 40, , 60 40, 60 Thanks to the SHOCK ELIMINATOR vibration damping system in CLAAS front loaders, you can work in comfort even in the field. FITLOCK system for rapid attachment/removal and MACH quick-release coupler for electric and hydraulic connections. The CLAAS front loader makes the ATOS extremely versatile in the field and around the yard

14 Built with you in mind. The cab. Comfort The ATOS has a generously proportioned cab which meets exacting requirements for a comfortable workplace. The door swings wide open for convenient access. All the main controls are instantly recognisable. And large glass windows provide an outstanding all-round view from the cab

15 More than a workplace. The cab. Cab Everything comfortably in view. The four-pillar cab provides an excellent all-round view of the work area. It also offers high levels of convenience for the driver, who can work in comfort throughout long working days. The doors swing wide open, allowing easy access. The perfect driver's seat. The ATOS comes with a range of driver's seats with a choice of mechanical and pneumatic suspension. Automatic height adjustment is available with the pneumatic suspension option. You can also choose between two seat widths. To protect the driver during crop spraying applications, an active carbon filter can be installed instead of the conventional cab filter. The rear window opens to three different positions. Rear window open a crack. Rear window half open. Rear window fully open. The windscreen opens wide for natural ventilation in the cab. As well as the large standard mirror, a wide-angle mirror for improved road safety is supplied as standard The steering wheel swivels and has telescopic height adjustment so that it can be perfectly adjusted for any driver. Thanks to the transparent sunroof, the driver always has a good view of the front loader and can work safely and accurately at all times

16 A place for everything. Right-hand control panel 1 Automatic PTO engagement / disengagement 2 Rear PTO on / off 3 Front PTO on / off 4 Stop rear linkage 5 Lift / lower rear linkage 6 Hand throttle 7 Two engine speed memories 8 Differential lock 9 Four-wheel drive 10 Rear linkage control panel 11 Mechanical spool valves 12 Electronic spool valve Comfortable to operate. The controls for the air-conditioning system and rear windscreen wiper are positioned at top right in the cab roof where they are easy to reach. The fan can be adjusted continuously to suit the conditions at the time. The control levers to the right of the driver's seat are positioned at a convenient height and are easy to reach

17 Within easy reach. Left-hand control panel Flexible display. The clear display in the instrument panel is mounted directly on the steering column. Thanks to the 3-spoke steering wheel, the driver can view all the key information, instructions and warnings at a glance. Ergonomic controls. 1 REVERSHIFT lever 2 Indicators incl. windscreen wiper controls, main beam and horn 3 Flashing hazard warning lights 4 Road and work lights Additional control panel. The ATOS cab has another control panel to the left of the driver's seat. The control panel for a radio system, the warning beacon switch and two switches for work lights are positioned at top left in the cab roof. The controls here are also easy to reach and operate the following functions: 1 Pre-select PTO speed (540/1,000) 2 Activate ECO for PTO speeds 3 Engage ground speed PTO 4 Parking brake 32 33

18 Make yourself at home. SMART STOP Dynamic steering SMART STOP stopping made simple. Dynamic steering. Thanks to the SMART STOP function, the ATOS remains stationary when the brake pedal is pressed without needing to use the clutch pedal. This helps the driver considerably, particularly during work around the farm or in the field, e.g. making round bales. SMART STOP is very easily activated by pressing a button on the instrument panel. When dynamic steering is activated on the instrument panel at the front, the number of turns of the steering wheel needed to reach maximum wheel lock is significantly reduced. This greatly improves ease of operation during front loader work or on the headland. Dynamic steering is available for all ATOS models

19 Always on the right track. CLAAS steering systems. Operator assistance systems Multiple selling points: No need to touch the hydraulics Steering system can easily be moved between different machines All the functions of the GPS PILOT Accurate steering. The S7 basic terminal has all the latest technology and is the right choice if you just want to use your terminal to control a parallel guidance or automatic steering system. With its high-resolution 7" touchscreen, the S7 performs all the necessary functions. GPS PILOT. The easy way to start. The GPS COPILOT from CLAAS is the ideal entry-level model for satellite-based steering systems and offers a wide range of functions. The driver guided by the EGNOS satellite signal (with no licence fee) can steer the machine safely and securely in parallel lines or along variable contours with a GPS accuracy of +/ 15 to 30 cm. The system enables the operator to utilise the machine s full working width and reduces overlapping. This boosts the quality of work while reducing the work time even in difficult light and weather conditions. Ideal for: Tillage Fertiliser application Slurry spreading Manure application Lime application All jobs with no orientation points (tramlines) In addition to hydraulic steering, the GPS PILOT can also be used with the GPS PILOT FLEX automatic steering wheel. This steering wheel enables you to achieve a high degree of accuracy. The great advantage of the GPS PILOT FLEX is its versatility. The steering wheel is easily transferred between machines which are only used on a seasonal basis such as combine harvesters and forage harvesters, then the GPS PILOT FLEX can be used on a tractor for field work. It is also designed for installation on older CLAAS machines or machines from other manufacturers. A number of options are available. You can use the existing GPS PILOT equipment on the individual machines and just change the steering wheel, or you can move all the main components between machines

20 Maintenance must be as simple as possible. Maintenance Quick maintenance. Fresh air for full power. Daily maintenance work should be as straightforward as possible because we know from experience that nobody enjoys doing things that are complicated or inconvenient. The large intake panels in the bonnet provide plenty of fresh air for cooling and for the engine air filter. The radiator assembly is easy to clean. The one-piece bonnet opens at the press of a button, providing access to all the engine maintenance points The oil can be checked on the right-hand side of the ATOS when the bonnet is closed All daily maintenance tasks can be carried out without tools The special air nozzle supplied makes light work of cleaning the tightly packed cooling units, allowing radiator surfaces to be checked and cleaned quickly whenever necessary. The air filter is located in an accessible position in front of the radiator panels so it can be removed easily. It is generously sized and designed for a long service life. A pre-cleaner for coarse dirt particles in the filter housing further extends the cleaning interval. The cab air filter is outside the cab and easily removed for maintenance. The toolbox by the cab access steps on the right-hand side is a standard feature. The fuses are centrally located in the cab

21 Whatever it takes. CLAAS Service & Parts. CLAAS Service & Parts Your requirements count. For your business: CLAAS FARM PARTS. Planned reliability. Worldwide coverage from Hamm. You can always rely on us: we'll be there whenever you need us. Everywhere. Fast. Reliable. 24 hours a day if necessary. With a complete solution for your machine or business. Whatever it takes. CLAAS FARM PARTS offers one of the most comprehensive spare parts programmes, regardless of brand and sector, for all agricultural applications on your farm. Whatever it takes. Our service products help you to increase machine reliability, minimise the breakdown risk and base your calculations on predictable costs. CLAAS MAXI CARE offers planned reliability for your machine. Whatever it takes. Our central spare parts warehouse delivers all ORIGINAL parts quickly and reliably all over the world. Your local CLAAS partner can supply the right solution for your harvest or your business within a very short time. Whatever it takes. ORIGINAL parts and accessories. Specially matched to your machine: precision-manufactured spare parts, high-quality consumables and useful accessories. We will supply exactly the right solution from our comprehensive product range to ensure that your machine is 100% reliable. Whatever it takes. Always up to date. CLAAS dealers are among the most efficient agricultural technology businesses in the world. Our service teams are ideally qualified and equipped with the all-important special tools and diagnostic systems. CLAAS Service stands for high-quality work which meets all your expectations with regard to expertise and reliability. Whatever it takes. The CLAAS Parts Logistics Center in Hamm, Germany, stocks more than 155,000 different parts and has a warehouse area of over 100,000 m

22 The ATOS. Features. CPS. Three 3-cylinder and three 4-cylinder models Common rail injection Turbocharger and intercooler Two engine speed memories REVERSHIFT electronic clutchless reverser TWINSHIFT transmission for two powershift speeds or TRISHIFT for three powershift speeds 40 km/h maximum speed at reduced engine speed Operator assistance systems. Comfort and convenience. 4-pillar cab for a perfect all-round view Generously sized windows, including transparent sunroof Opening front and rear windows Easy access Wide choice of driver's seats Tilting steering column with telescopic height adjustment Air conditioning Active carbon filter for crop spraying SMART STOP Dynamic steering Hydrosilent blocks for comfortable cab suspension ATOS Engine Type Farmotion Farmotion Farmotion Farmotion Farmotion Farmotion Number of cylinders Cubic capacity cm Common-rail injection (2000 bar) Exhaust gas aftertreatment with DOC and EGR Nominal engine speed rpm Output at nominal engine speed (ECE R 120) 1 kw/hp 79/107 72/97 61/84 67/91 61/84 55/75 Max. output (ECE R 120) 1 kw/hp 83/113 76/102 66/88 72/97 66/88 55/75 Type approval value (97/68/EC) 2 kw Engine speed at max. torque rpm Max. torque (ECE R 120) 1 Nm Max. fuel tank capacity l Oil-change interval h Transmission Four-wheel drive Rear-wheel drive Oil-change interval h gear transmission with 2 ranges, 8 V / 8 R with creep gear, 16 V / 16 R with 2 powershift speeds TWINSHIFT 16 V / 16 R with creep gear and 2 powershift speeds TWINSHIFT 32 V / 32 R 5-gear transmission with 2 ranges, 10 V / 10 R with creep gear, 20 V / 20 R with 2 powershift speeds TWINSHIFT 20 V / 20 R with 3 powershift speeds TRISHIFT 30 V / 30 R with creep gear and 2 powershift speeds TWINSHIFT 40 V / 40 R with creep gear and 3 powershift speeds TRISHIFT 60 V / 60 R REVERSHIFT clutchless reverser / / / / / / / mechanical reverser 3 Min. speed with creep gear m/h Min. speed without creep gear km/h ,82 1,82 1,82 Rear axle Electrohydraulically connected differential lock at rear (dog clutch) Distance between wheel mounting faces mm Max. rear wheel tyres (diameter) m Road safety Braking system (multiple discs in oil bath) Braked front axle Hydraulic trailer braking system Pneumatic trailer brakes PTO /540 ECO 540/540 ECO and 1000/1000 ECO Ground PTO Automatic PTO engagement/ disengagement 1⅜" PTO stub, 6 splines ATOS Four-wheel drive front axle Electronic activation Max. steering angle degrees Optimum turning radius m Distance between wheel mounting faces mm Pivoting mudguards Hydraulics Open hydraulic circuit, 55 l/min Output at nominal engine speed l/min Open hydraulic circuit, 60 I/min ECO Output at 1600 rpm l/min Open-centre hydraulic circuit 90 l/min Output at nominal engine speed l/min Max. operating pressure bar Number of mechanical spool valves (min. max.) Electronic spool valve (max. 25 l/min) Flow control on mechanical spool valves Open return line Rear linkage Lower and upper links with category II coupling hook Lower and upper links with category II ball end Max. lifting capacity at ball ends kg Max. lifting capacity at ball ends with additional lift rams kg Mechanical control Electronic control External controls Front linkage Max. lifting power kg Vibration damping Cat. II lower link hook Front PTO 1000 rpm Cab FOPS transparent sunroof Driver's seat, mechanical suspension Driver s seat, mechanical suspension, wide Driver's seat, air suspension, wide Driver's seat, air suspension, wide, with automatic height adjustment Air conditioning Passenger seat Opening front windscreen Rear window wiper Max. number of work lights, front/rear 2/4 2/4 2/4 2/4 2/4 2/4 25 amp socket GPS COPILOT is the ideal introduction to satellite-based steering systems GPS PILOT FLEX for flexibility S7 terminal with high-resolution 7" touchscreen 1 Meets ISO TR Performance data fit criteria for admissibility. Performance as per 97/68/EC is identical to 2000/25/EC. 3 Not available with TRISHIFT transmission CLAAS continually develops its products to meet customer requirements. This means that all products are subject to change without notice. All descriptions and specifications in this brochure should be considered approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please refer to your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid any risk of danger, never remove these protective panels yourself. In this respect, please refer to the relevant instructions in the operator's manual. All technical specifications relating to engines are based on the European emission regulation standards: Stage. Any reference to the Tier standards in this document is intended solely for information purposes and ease of understanding. It does not imply approval for regions in which emissions are regulated by Tier. 42 Standard Optional Available Not available Standard Optional Available Not available

23 ATOS Dimensions and weights Length (without front ballast, mm without front linkage) (d) Centre of rear axle to top of cab (a) mm Overall height (b) mm Wheelbase (c) mm Ground clearance (e) mm Weight kg Max. permissible gross weight kg Take a look at the video about excellent work. tractor.claas.com Four-wheel drive ATOS 350 ATOS 340 ATOS 330 ATOS 240 ATOS 230 ATOS 220 Rear tyres Front tyres 540/65 R /65 R /70 R /70 R /85 R /85 R /70 R /70 R /70 R /70 R /65 R /70 R /85 R /85 R /70 R /70 R /65 R /65 R /85 R /85 R /85 R /85 R 28 Rear-wheel drive ATOS 340 ATOS 230 Rear tyres Front tyres 480/70 R /85 R /70 R /85 R Excellent work. Tractors from CLAAS. e e c d a b CLAAS UK Saxham Bury St. Edmunds Suffolk IP28 6QZ Tel claas.co.uk info-uk@claas.com 365FarmNet enables you to manage your entire agricultural business by means of a single, nonproprietary software solution. Interfaces to intelligent applications created by partners in the agricultural sector offer expert support for your business 365 days a year. CLAAS is a 365FarmNet partner. Standard Optional Available Not available HRC / KK LC 0319