WINLINE WSL501 Static White LED Interior Linear Surface

Transcription

1 WINLINE WSL501 Static White LED Interior Linear Surface Catalog Number Notes Type Hit the Tab key or mouse over the page to see all interactive elements. Specifications Length Weight 241/4" (616 mm) 3.5 lbs (1.59 kg) WSL501 INT 361/8" (918 mm) 4.0 lbs (1.81 kg) 48" (1219 mm) 5.0 lbs (2.27 kg) L Introduction WINLINE 501 Series linear surface mount luminaires are designed to graze or wash interior architectural features or facades with crisp static white. WSL501 is available in 2ft, 3ft, or 4ft lengths with various distribution options that provide the user exceptional beam control, placing the light where it is required. WINLINE 501 Series linear surface mount luminaires produce best in class efficacy and optical performance. 21/4" [57.15mm] 25/16" 58.97mm 4" mm 23/4" 70.09mm 33/4" [94.63mm] 27/16" 62.15mm 11/8" 28.55mm 29/16" 65.02mm 21/2" 64.13mm Warranty 5year limited warranty. Complete warranty terms located at: No Mount (Shown for size reference only) 500ADJC1 Mount 500ADJH2 Mount 500FMC Mount Ordering Information EXAMPLE: WSL501 LSL 33FT MSL3 500ADJC1 INT 10X60DEG 750LMF 90CRI 40K MVOLT MIN1 ZT FCLW100TR FCA WHT WSL501 Series Linear Plan Total Run Length Maximum Section Length Mounting Environment Distribution WSL501 Winline Line Voltage, Surface Linear Mount LCB LLP LSL Linear Center Balance Linear Longest Possible Linear Same Length FT Specify continuous linear feet in 1' increments starting at 2' (Example: 24FT) MSL2 MSL3 MSL4 2' Section Length 3' Section Length 4' Section Length 500ADJC1 500ADJH2 500FMC Adjustable Mount Center Axis Adjustable Mount Side Hinge Fixed Mount INT Interior Location 9X9DEG 9 x 9 Degrees 10X60DEG 10 x 60 Degrees 15X30DEG 15 x 30 Degrees 30X60DEG 30 x 60 Degrees 40X60DEG 40 x 60 Degrees 60X60DEG 60 x 60 Degrees WWD Wall Wash (Asymmetric) ** WWD option supplied with a snapon visor LED Output LED Color Rendering LED Color Temperature Voltage Minimum Dimming Level Control Input External Shielding 300LMF 450LMF 600LMF 750LMF 1000LMF 300 Nominal Lumens Per Foot 450 Nominal Lumens Per Foot 600 Nominal Lumens Per Foot 750 Nominal Lumens Per Foot 1000 Nominal Lumens Per Foot 80CRI 90CRI 80+ CRI 90+ CRI (Not available in 50k) 27K 30K 35K 40K 50K 2700K 3000K 3500K 4000K 5000K (Not available in 90CRI) MVOLT 120V 277V MIN1 Constant Current, Dimming to 1% (Use with ZT Control Input only) DARK Constant Current, Dimming to <1% (Use with DALI or DMX Control Input only) ZT 010V DALI DALI DMX DMX (blank) BFL GVL No Shielding Baffle Linear Surface (Matte black finish) Glare Visor Linear Surface (Finish to match housing) Electrical Option Brackets Lens Option Finish NOFCL No Feed Cable (order separate) FCLW10TL 10FT Feed Cable, Left Feed, Interior Location FCLW25TL 25FT Feed Cable, Left Feed, Interior Location FCLW50TL 50FT Feed Cable, Left Feed, Interior Location FCLW100TL 100FT Feed Cable, Left Feed, Interior Location FCLW10TR 10FT Feed Cable, Right Feed, Interior Location FCLW25TR 25FT Feed Cable, Right Feed, Interior Location FCLW50TR 50FT Feed Cable, Right Feed, Interior Location FCLW100TR 100FT Feed Cable, Right Feed, Interior Location (blank) No Cantilever Brackets CBT6 Cantilever Bracket 6" Projection CBT12 Cantilever Bracket 12" Projection CBT18 Cantilever Bracket 18" Projection CBTL6 Cantilever Bracket Large 6" Projection CBTL12 Cantilever Bracket Large 12" Projection CBTL18 Cantilever Bracket Large 18" Projection **Must have 500ADJH2 mounting selected. (blank) FCA Standard Clear Acrylic Supplied Frosted, Clear Acrylic BKT Black Textured Paint SIT Silver Textured Paint WHT White Textured Paint CPF Custom Painted Finish RALTBD RAL Paint Finish RALTBD for pricing only, replace with applicable RAL call out when ready to order. See the Architectural RAL Color brochure for available options. Accessories Controller (Fresco Control System) See page 57 Controller (Easyl Solo / Touch / Pro) See page 57 DMXPower Integrator (required for See page 57 installation) Feed Cable (required for installation) See page 57 Jumper Cable See page 57 LiquidTight Cord Grip See page 57 Glare Visor See page 57 Baffle See page 57 Brackets See page 57 Page 1 of 18

2 Linear Plan Winona offers the ability to provide a continuous run plan to suit your requirements by optionally offering three methods of configuration. LSL Longest Same Length: In this configuration each segment is the same length is standardized based on the longest length available and is the only option provided. Because it is dependent on one segment length there are mathematical limitations on what overall row lengths can be achieved. Example: 20FT row would be achieved with (5) 4FT long segments equaling 20FT (nominal). LCB Longest Center Balanced: This configuration incorporates the longest center segment(s) along with any additional lengths required to fill located at each end. Example: 22FT row would have (2) 3FT segments (one at each end) and (4) 4FT intermediate segments located in between. LLP Longest Length Possible: In this plan the longest length available is optimized resulting in the fewest segments and mounting locations. Caution should be used where balanced appearance is a concern. Example: 22FT row would have (5) 4FT segments and (1) 2FT segment located at one end. LSL 20FT LCB 22FT LLP 22FT 4' 4' 4' 3' 4' 4' 4' 4' 3' 2' 4' 4' 4' 4' 4' 4' 4' Distribution x9 Degree 10x60 Degree 15x30 Degree x60 Degree WWD Wall Wash (Asymmetric) *Shown with supplied snapon visor 40x60 Degree 30x60 Degree Page 2 of 18

3 Performance Data Lumens Per Foot Fixture Length Beam CCT CRI Delivered Lumens Input Watts LPW Lumens Per Foot Fixture Length Beam CCT CRI Delivered Lumens Input Watts LPW Lumens Per Foot Fixture Length Beam CCT CRI Delivered Lumens Input Watts LPW FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K FT 9x9 40K FT 10x60 40K FT 15x30 40K FT 30x60 40K FT 40x60 40K FT 60x60 40K FT WWD 40K Lumen Multipier Table Data table baseline is 4000K 80CRI photometry. This table can be used to approximate the lumen values at different Kelvin temperatures and Color Rendering Index. Power consumption would stay the same. For Distributions: 9X9DEG & 10X60DEG For Distributions: 15X30DEG, 30X60DEG, 40X60DEG, 60X60DEG, & WWD CCT CRI Multiplier CCT CRI Multiplier 27K K K K K K K K K K K K K K K K K K DVL DVL FCA FCA Lumen values are from photometric tests performed in accordance with IESNA LM7908. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of enduser environment and application. Contact factory for performance data on any configurations not shown here. IES data is available at Refer to website for the latest IES file updates. Features & Specifications Voltage: 120 through 277v/60Hz Distribution: 9 x 9, 10 x 60, 15 x 30, 30 x 60, 40 x 60, 60 x 60, Asymmetric Wall Wash Size: 2.25 W x 2.31 H Housing: Extruded aluminum snap together construction Finish: Polyester powder coat painted finish. Black oxide fastener color with BKT finish and natural stainless steel fastener color with WHT & SIT finishes Lens Material: Extruded acrylic Lumen Maintenance: (9 x 9, 10 x 60 ): 60,000 hours +120deg C. (15 x 30, 30 x 60, 40 x 60, 60 x 60, WWD): 120,000 hours L70@ +55deg C LED: 12 LED diodes per foot Control System: 010V dimmer control or for DMX operation, Easyl or Fresco DMX512 controller Ambient Temperature Ranges: 40 to +50 C Mounting: Suitable for mounting within the space between ground and 4FT (1.2M) of the ground. Suitable for damp location applications. Certification/Compliance: CSA Certified to meet U.S. and Canadian standards conforming to UL 1598 and CAN/CSA C22.2 No Weight: 24" 3.5 lbs (1.59 kg) / 36" 4.0 lbs (1.81 kg) / 48" 5.0 lbs (2.27 kg) Warranty: 5 years Actual performance may differ as a result of enduser environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Assembled in America: Buy American Act Compliant Page 3 of 18

4 Basic System Wiring Information without DMX This very basic system wiring diagram provides an overview of components and materials required for a simple installation of WSL501 luminaires controlled by building system power (By Others). These diagrams should not be used in place of actual installation instructions or submittal drawings prepared for a specific project. A B Building power and dimming control input via 010V or DALI system provided by others. 120V277V input. Metallic conduit and standard fittings are compatible as are multiconductor cords provided they are appropriate to the mounting location V B A Building Power & Dimming C D C D E Feed cable connects junction box or control input with first fixture in a run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end is stripped for connection to the junction box, output end includes a female or male plug for fixture connection. Also included with each feed cable is a sealing cap for the end of each run. A maximum of 32 luminaires can be connected to a single feed cable. Power can be run to junction box locations in rigid conduit. Use Belden 9829 for data and copper wire per local code for power. Use appropriate fitting for combination cord. Included with each feed cable is a sealing cap for the last luminaire in each run. See installation instructions. E Maximum Run Length WSL501 Voltage Max Fixtures Max Run Length 120V 28* 112ft 277V ft *4ft fixtures max. Runs of shorter fixtures will allow up to 32 fixtures Feed Cable Wiring Black () White (+) Gray (010()) Purple (010(+)) Green (GRND) BARE SHIELD WIRE Feed Cable *Notes 1) Cap BARE SHIELD WIRE in Junction box. (By Others) 2) When not using 010V dimming, cap Gray and Purple separately in the junction box. (By Others) Luminaire installation can be as simple as a single luminaire and one control to many different luminaires in multiple locations being triggered and manipulated in real time. Consulting with the factory at the beginning stages of the project will ensure the required equipment be specified and properly installed. Page 4 of 18

5 Basic System Wiring Information with DMX This very basic system wiring diagram provides an overview of components and materials required for a simple installation of WSL501 luminaires controlled by a DMX controller. These diagrams should not be used in place of actual installation instructions or submittal drawings prepared for a specific project. A V D G B C Power & DMX Connection in DPI Box LINE VOLTAGE V INPUT POWER L1 N GRND L1 E GRND L1 N GRND L1 N GRND N DMX INPUT FROM DMX CONTROLLER COM E DMX IN COM DMX THRU COM COM DMX OUT A DMX OUT B DMX OUT C DMX OUT D A COM + A ORANGE (CAP DO NOT USE) VIOLET GREY BARE SHIELD WIRE GREEN WHITE BLACK COM + DMX THRU TO NEXT DPI A FEED CABLE CODING A H A DMX controller B providing C one Duniverse of E DMX512 control. G To supply a complete system RDM setup and playback control solution, use: Easyl Three versions available from entrylevel to show creation using computer software Full color LCD touchscreen Recall colors, shows, and effects with one touch Fresco Manage multiple light sources in multiple lighting zones, all from one controller On screen lighting design and setup, no computer required or Ethernet connection for remote configuration and advanced control All device settings are stored onboard in nonvolatile memory B Belden C9829 cable Dis the preferred E communication/data cable G H used to carry the DMX signal to and from the DPI Box. The total length of this cable must not exceed 1000 feet from the DMX controller to the DPI Box. No luminaires should be installed between DMX Controller and any DPI Box. A B C DPI box D(Data Power E Integration) is used to bundle DMX to line G H voltage and deliver them to the luminaire. This box provides necessary isolation between the DMX control and line voltage Maximum Run Length and is required for all WSL501 installations. The DPI box also serves as a 4channel splitter enabling up to 128 fixtures to be Voltage Max Max Run Fixtures Length controlled from a single DPI box. Refer to DPI Installation Sheet 120V 28* 112ft for dimensions and mounting details. WSL V ft A 120V277V input to DPI box. Metallic conduit and standard *4ft fixtures max. Runs of shorter Bfixtures will allow C D E up to 32 fixtures fittings are compatible G as are multiconductor H cords provided they are appropriate to the mounting location. A B C D E Feed cable connects junction box with first fixture in a run. 14 G H ga. conductors carry power, shielded 18 ga. conductors carry data. Input end is stripped for connection to the Junction or DPI box, output end includes a male or female plug for fixture connection. Also included with each feed cable is a termination/ sealing cap for the end of each run. Contact factory for availability of custom feed cable lengths. B C D E A maximum G of 32 H luminaires can be connected to a single output channel of the DPI box. The maximum length of cord and luminaire run combined is 1000 feet per DMX/RDM specification. B C D E G Power and H Data can be run to junction box locations in rigid conduit. Use Belden 9829 for data and copper wire per local code for power. Use appropriate fitting for combination cord. B C D E G H To ensure data integrity, a termination/sealing cap with 120 Ohm resistor is required at the last luminaire in each run. See installation instructions. Easyl Controller Fresco Control System H A dynamic colorchanging luminaire installation can be as simple as a single luminaire and one control to many different luminaires in multiple locations being triggered and manipulated in real time. Consulting with the factory at the beginning stages of the project will ensure the required equipment be specified and properly installed. Note: For multiple runs and multiple DPI boxes, consult factory. Note: No more than four DPI Boxes, in series, can be utilized between the DMX Controller and any luminaire. Page 5 of 18

6 Accessory Options Fresco Control System Series Options Finish FCS Fresco Control System 7TSN 7" touchscreen with nlight port (blank) X nlight only DMX/RDM control DBL DWH DNA Black White Natural Aluminum Refer to FRESCO spec sheet for additional details and options Easyl LED Show Controller with LCD touchscreen (integral power supply) Series Voltage Finish EZSOLO EZTOUCH EZPRO Easyl Solo Easyl Touch Easyl Pro MVOLT 120V277V VAC, 50/60 Hz BK Black WH White Refer to EASYL spec sheet for additional details and options DMX / Power Integrator 6 5/16" (160mm) 10 1/4" (260mm) Integrates DMX signal & line voltage onto a single cable. Exterior rated, up to 4 output feeds, Silver Textured Finish. DPI4W DPI4W DMX/POWER INTEGRATOR BOX 3 9/16" (90mm) Feed Cable, Right Feed (Female Plug), INTERIOR (Linear) *Minimum of one feed cable, left or right, required per installation Carries DMX signal and line voltage power to right end of first fixture in run. Supplied with termination/sealing cap. *Use one feed cable per run only.* FCLW10TR DXP FCLW25TR DXP FCLW50TR DXP FCLW100TR DXP 10FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) 25FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) 50FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) 100FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) Below to be used with INTERIOR units in WHT finish only: SHIELD 3" 76.20mm FCLW10TR WHT DXP 10FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) FCLW25TR WHT DXP 25FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) FCLW50TR WHT DXP 50FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) FCLW100TR WHT DXP 100FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) Page 6 of 18

7 Accessory Options (Continued) Feed Cable, Left Feed (Male Plug), INTERIOR (Linear) *Minimum of one feed cable, left or right, required per installation Carries DMX signal and line voltage power to left end of first fixture in run. Supplied with termination/sealing cap. *Use one feed cable per run only.* FCLW10TL DXP FCLW25TL DXP FCLW50TL DXP FCLW100TL DXP 10FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) 25FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) 50FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) 100FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) Below to be used with INTERIOR units in WHT finish only: SHIELD 3" 76.20mm FCLW10TL WHT DXP FCLW25TL WHT DXP FCLW50TL WHT DXP FCLW100TL WHT DXP 10FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) 25FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) 50FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) 100FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) Page 7 of 18

8 Accessory Options (Continued) Feed Cable, Right Feed (Female Plug), INTERIOR (Linear) *Minimum of one feed cable, left or right, required per installation Carries NONDMX signal and line voltage power to right end of first fixture in run. Supplied with termination/sealing cap. *Use one feed cable per run only.* FCLW10TR NDXP FCLW25TR NDXP FCLW50TR NDXP FCLW100TR NDXP 10FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) 25FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) 50FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) 100FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (Black) Below to be used with INTERIOR units in WHT finish only: SHIELD 3" 76.20mm FCLW10TR WHT NDXP FCLW25TR WHT NDXP FCLW50TR WHT NDXP FCLW100TR WHT NDXP 10FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) 25FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) 50FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) 100FT Feed Cable w/ Sealing Cap, Right Feed, Interior Location (White) Feed Cable, Left Feed (Male Plug), INTERIOR (Linear) *Minimum of one feed cable, left or right, required per installation Carries NONDMX signal and line voltage power to left end of first fixture in run. Supplied with termination/sealing cap. *Use one feed cable per run only.* FCLW10TL NDXP FCLW25TL NDXP FCLW50TL NDXP FCLW100TL NDXP 10FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) 25FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) 50FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) 100FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (Black) Below to be used with INTERIOR units in WHT finish only: SHIELD 3" 76.20mm FCLW10TL WHT NDXP FCLW25TL WHT NDXP FCLW50TL WHT NDXP FCLW100TL WHT NDXP 10FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) 25FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) 50FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) 100FT Feed Cable w/ Sealing Cap, Left Feed, Interior Location (White) Jumper Cable INTERIOR (Linear) *Optional* Carries DMX or NONDMX signal and line voltage power between two units in a run when larger spacing between units is required. JCLW1T JCLW3T JCLW5T 1FT Jumper Cable Interior Location (Black) 3FT Jumper Cable Interior Location (Black) 5FT Jumper Cable Interior Location (Black) Below to be used with INTERIOR units in WHT finish only: JCLW1T WHT JCLW3T WHT JCLW5T WHT 1FT Jumper Cable Interior Location (White) 3FT Jumper Cable Interior Location (White) 5FT Jumper Cable Interior Location (White) Page 8 of 18

9 Accessory Options (Continued) Glare Visor (Linear) *Optional* Fixture Section Environment Finish GVL5 Glare Visor Linear Surface U2 2FT Length Unit U3 3FT Length Unit U4 4FT Length Unit INT Interior Location BKT Black Textured Paint SIT Silver Textured Paint WHT White Textured Paint RALTBD RAL Paint Finish CPF Custom Painted Finish Reference Additional Accessory Details section for dimensions Baffle (Linear) *Optional* Fixture Section Environment BFL5 Baffle Linear Surface (Available in matte black finish only) U2 U3 U4 2FT Length Unit 3FT Length Unit 4FT Length Unit INT Interior Location Reference Additional Accessory Details section for dimensions LiquidTight Cord Grip 1/2 NPSM Threads Connector to secures and seal feed cord. CORDGP2 LiquidTight Cord Grip (Use to secure and seal feed cord to DPI Box) Cable Diameter Range diameter 1 3/4" (44mm) Brackets *Optional* Series Finish CBT6 CBT12 CBT18 Cantilever Bracket 6" Projection Cantilever Bracket 12" Projection Cantilever Bracket 18" Projection BKT SIT WHT RALTBD CPF Black Textured Paint Silver Textured Paint White Textured Paint RAL Paint Finish Custom Painted Finish Reference Additional Accessory Details section for dimensions Brackets *Optional* Series Finish For use with surface mount junction box (by others) and surface mounted conduit (by others). CBTL6 CBTL12 CBTL18 Cantilever Bracket Large 6" Projection Cantilever Bracket Large 12" Projection Cantilever Bracket Large 18" Projection BKT SIT WHT RALTBD CPF Black Textured Paint Silver Textured Paint White Textured Paint RAL Paint Finish Custom Painted Finish Reference Additional Accessory Details section for dimensions Page 9 of 18

10 Dimensions & Mounting 500ADJC1 Adjustable Mount Center Axis 241/4" [615.63mm] 361/8" [917.26mm] 48" [ mm] /4" [57.15mm] 7/16" [11.04mm] 1/8" [3.17mm] 1" [25.08mm] 23/4" [70.09mm] 21/4" [56.36mm] 33/4" [94.46mm] 33/4" [94.46mm] 1913/16" [502.92mm] 2811/16" [728.35mm] 409/16" [ mm] 4" [101.60mm] 500ADJH2 Adjustable Mount Side Hinge 241/4" [615.63mm] 361/8" [917.26mm] 48" [ mm] 50 21/4" [57.15mm] 33/4" [94.63mm] 90 1/8" [3.17mm] 7/16" [11.04mm] 1" [25.08mm] 27/16" [62.15mm] 115/16" [49.34mm] 213/16" [71.88mm] 4" [102.05mm] 157/8" [402.72mm] 225/8" [575.06mm] 321/8" [816.36mm] 197/16" [493.40mm] 285/16" [718.82mm] 403/16" [ mm] Page 10 of 18

11 Dimensions & Mounting 241/4" mm 361/8" mm 48" mm 500FMC Fixed Mount 29/16" 65.02mm 7/16" 11.04mm 1/8" 3.17mm 1" 25.08mm 21/2" 64.13mm 11/8" 28.55mm 115/16" 49.34mm 213/16" 71.88mm 4" mm 157/8" mm 225/8" mm 321/8" mm 29/16" 65.02mm 197/16" mm 285/16" mm 403/16" mm Page 11 of 18

12 Dimensions & Mounting (Continued) 500ADJC1 Adjustable Mount Center Axis Detail 31/4" 82.55mm 1" 25.40mm 3/16" 4.80mm 4" mm 1/4" 6.35mm 3/4" 19.45mm 11/16" 26.99mm 5/8" 15.88mm 500ADJH2 Adjustable Mount Side Hinge Detail 11/4" 31.75mm 1/4" 7.11mm 27/16" 61.91mm 31/2" 89.53mm 13/16" 30.10mm 31/8" 79.49mm 1" 25.40mm 31/2" 89.59mm 33/4" 94.63mm 500FMC Fixed Mount Detail Page 12 of 18

13 Dimensions & Mounting WWD Asymmetric Glare Visor with 500ADJC1 Mount *Automatically included when WWD distribution is ordered.* 241/4" [615.65mm] 361/8" [917.24mm] 48" [ mm] 7/16" 11.49mm 33/16" 81.36mm 813/16" [223.84mm] 131/4" [336.54mm] 191/8" [485.03mm] 35/16" [83.99mm] 413/16" [122.09mm] 47/8" [124.42mm] C L 1913/16" [502.92mm] 2811/16" [728.35mm] 409/16" [ mm] 4" mm WWD Asymmetric Glare Visor with 500ADJH2 Mount *Automatically included when WWD distribution is ordered.* 241/4" [615.65mm] 361/8" [917.24mm] 48" [ mm] 7/16" 11.49mm 215/16" 74.24mm 813/16" [223.84mm] 131/4" [336.54mm] 191/8" [485.03mm] 35/16" [83.99mm] 413/16" [122.09mm] 47/8" [124.42mm] 415/16"[124.62mm] 5" [127mm] 5" [127mm] 9" [229.24mm] 1713/16" [452.12mm] 2911/16" [753.75mm] 33/4" 94.97mm VIEW A WWD Asymmetric Glare Visor with 500FMC Mount *Automatically included when WWD distribution is ordered.* 241/4" [615.65mm] 361/8" [917.24mm] 48" [ mm] 7/16" 11.49mm 215/16" 74.24mm 813/16" [223.84mm] 131/4" [336.54mm] 191/8" [485.03mm] 35/16" [83.99mm] 413/16" [122.09mm] 47/8" [124.42mm] C L 29/16" 9" [228.28mm] 177/8" [453.68mm] 299/16" [750.66mm] 65.02mm Page 13 of 18

14 Dimensions & Mounting (Continued) WSL501 Series Typical EndToEnd Run Configuration 241/4" (615.63mm) Minimum Spacing 1/8" (3.18mm) 48" ( mm) 21/4" (57.15mm) 23/8" (60.33mm) Input Cable 27/8" (73.03mm) 27/16" (61.91mm) 4" (101.60mm) Input Cable 4" (101.60mm) Additional Accessory Details Baffle Linear Surface 241/16" [611.22mm] 3515/16" [912.98mm] 4713/16" [ mm] 21/4" 57.15mm 15/16" 24.33mm 15/16" 23.11mm 15/16" 34.04mm 31/8" 80.11mm Page 14 of 18

15 Additional Accessory Details (Continued) Glare Visor with 500ADJC1 Mount 241/4" [615.63mm] 361/8" [917.22mm] 48" [ mm] 2" 50.81mm 43/4" mm 813/16" [223.84mm] 131/4" [336.54mm] 191/8" [485.03mm] 35/16" [83.98mm] 413/16" [122.08mm] 47/8" [124.42mm] C L 1913/16" [502.92mm] 2811/16" [728.35mm] 409/16" [ mm] 4" mm Glare Visor with 500ADJH2 Mount 241/4" [615.63mm] 361/8" [917.22mm] 48" [ mm] 2" 50.81mm 41/2" mm 813/16" [223.84mm] 131/4" [336.54mm] 191/8" [485.03mm] 35/16" [83.98mm] 413/16" [122.08mm] 47/8" [124.42mm] 4" [101.60mm] 5" [127mm] 7" [177.80mm] 1015/16" [277.50mm] 1713/16" [452.12mm] 2511/16" [652.15mm] 33/4" 94.89mm Page 15 of 18

16 Additional Accessory Details (Continued) Glare Visor with 500FMC Mount 241/4" [615.63mm] 361/8" [917.22mm] 48" [ mm] *The (3) visor clips can also be used for mounting fixture to surface. 2" 50.81mm 41/2" mm 813/16" [223.84mm] 131/4" [336.54mm] 191/8" [485.03mm] 35/16" [83.98mm] 413/16" [122.08mm] 47/8" [124.42mm] C L 11" [279.08mm] 177/8" [453.68mm] 259/16" [649.06mm] 29/16" 64.49mm Cantilever Bracket Large Detail 21/2" 63.50mm 9/16" 13.93mm 41/16" mm 13/4" 44.45mm 57/8" mm 83/16" mm 1" 25.40mm 3/4" [19.05mm] 63/4" [171.45mm] 123/4" [323.85mm] 41/16" mm 113/16" 23/4" 69.85mm 51/8" mm 51/8" mm 11/2" 38.10mm 45.26mm 101/4" mm 71/2" mm 9/16" 14.29mm 11/8" 28.58mm 11/4" 32mm Page 16 of 18

17 Additional Accessory Details (Continued) Cantilever Bracket Detail 2" 50.80mm 9/16" 13.93mm 25/8" 66.73mm 13/4" 44.45mm 41/4" mm 21/8" 53.98mm 11/4" [31.75mm] 71/4" [184.15mm] 131/4" [336.55mm] 29/16" 65.52mm 53/16" mm 51/4" mm 313/16" 96.06mm 11/2" 38.10mm 13/4" 44.09mm 61/8" mm 17/8" 47.63mm Cantilever Bracket Detail with 500ADJH2 and Fixture 80 Adjustable Extended Arm Mounting 6" Adjustable Extended Arm Mounting 12" Adjustable Extended Arm Mounting 18" /16" [145.03mm] 1111/16" [297.43mm] 1711/16" [449.83mm] Page 17 of 18

18 Additional Accessory Details (Continued) WSL501 Series Typical EndToEnd Run Configuration with Cantilever Brackets (Showing 6foot run of (3) 2foot units with CBT12 bracket accessory Page 18 of 18