SODA EQUIPMENT CATALOG July 2012

Transcription

1 SODA EQUIPMENT CATALOG July Northwestern Dr., San Antonio, TX

2 Helping Companies Profit From Every Pour! INDEX Taprite is a preferred supplier to many well known brands in the soda and beer industries around the world. Our regulators have been an industry standard for over 60 years and are known as best in the field. Taprite is owned by Aalberts Industries, which globally is the largest supplier of CO2 regulators in the beverage industry. Taprite s quality products, innovative designs and commitment to the industry make it the brand of choice! Taprite Overview...2 Index...3 Primary Regulators Secondary Regulators...6 Regulator Parts and Accessories...7 BIB Racks - Inclined with Louvered Panels...8 BIB Racks - Inclined with Hole Panels...9 BIB Racks - Flat, Vertical with Louvered Panels...10 BIB Racks - Flat, Vertical with Hole Panels...11 BIB Accessories Taprite Products Include: CO2 Regulators Bag-in-Box Racks Stainless Steel Ice Chests Carbonation Testers Gauge Protectors Draft Beer Taps Keg Couplers Draft Towers Party Pumps Conversion Stands Accessories Ice Chests Ice Chest Accessories...16 Pepsi Carbonation Tester...17 Hoses, Nipples, Diaphragm & Capsule Seat Assemblies...18 Regulatory agency listings: Regulator Trouble Shooting...19 Detailed Product Exploded Views Policies and Procedures...23 Warranty Information...24 Don t risk system failures with inferior equipment! Do it right - choose Taprite! Not responsible for typographical or photographic errors. July 2012 Taprite. All rights reserved. Taprite products meet or exceed industry standards! 3248 Northwestern Dr., San Antonio, Texas Fax sales@taprite.com taprite.com 2 3

3 Primary Regulators Primary Regulators Taprite regulators have the highest flow rate in the industry. Robust design delivers performance, reliability and is unlikely to experience freeze up problems. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap! Pull cap to adjust the pressure and push back to lock it in. The TAPRITE ADVANTAGE High CO2 volumetric flow ensures product dispensing continuity while maintaining constant high flow of CO2 as the tank discharges T5741PMHP T5741PMHPB T5741PMHPBK T5741PMHPBKGP T5741PMHPGPS T5745HPBK 1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve red cap 1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve blue cap 1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve black cap 1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve black cap, metal gauge guard 1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve red cap, gauge boot 1P X 5P, 160lb & 2000lb gauge, (5) X ¼" flare with check valve (vertical manifold) red cap UL approved Polycarbonate bonnet eliminates tools for fast and accurate adjustments Service friendly - main components are accessible from the front for replacement 10 Micron filter at the inlet port to keep contaminants out of the regulator Fewer parts to manage T5741PMHPBK T5752HP-02 2P x 2P, 160LB & 2000LB gauge, ¼" flare with check valve red cap P x 1P, 160lb. & 2000lb. gauge, CO2 tank fitting, ¼" flare w/check valve outlet, black zinc bonnet P x 2P, 160lb. & 2000lb. gauge, CO2 tank fitting, ¼" flare w/check valve outlet, black zinc bonnet Wall Mount Regulators 3741 (Zinc Bonnet) T5741WMHP T5741WMHP-3 T5741WMHP-6 T8861-6B 1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check valve red cap 1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check valve red cap, 3 foot hose with CO2 tank fitting 1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check red cap, 6 foot hose with CO2 tank fitting 2P X 2P Dual body primary regulator, wall mount with 6 ft. hose, blue poly bonnet Questions? Contact us at sales@taprite.com 4 5

4 SECONDARY Regulators Regulator Parts & Accessories Gauges T5261SN 1P X 1P 100lb gauge, ¼" flare inlet, ¼" flare check valve outlet, gold cap 5602 Gauge 0-30 PSI, ¼" NPT, right hand thread 5603 Gauge PSI ¼" NPT, right hand thread T5261SN60 T5261SNBK 1P X 1P 60lb gauge, ¼" flare inlet, ¼" flare check valve outlet, gold cap 1P X 1P 100lb gauge, ¼" flare inlet, ¼" flare with check valve out black cap 5605 Gauge PSI, ¼" NPT, right hand thread 624 Gauge 0-60 PSI, ¼" NPT, right hand thread Gauge PSI, ¼" NPT, right hand thread Gauges T5261SNBL T5261SND T5261ST 1P x 1P 100lb gauge, ¼" flare inlet/thru, ¼" flare with check valve outlet blue cap 1P X 1P, 30lb gauge, ¼" flare inlet, ¼" flare with check valve outlet gold cap 1P X 1P, 100lb gauge, ¼" flare inlet, ¼" flare with shutoffs outlet gold cap 6603 Gauge PSI, ¼" NPT, left hand thread Gauge PSI, ¼" NPT, left hand thread Gauge Mounting/Parts and Protection Plastic glide bracket for regulator T5272SN T5272SNG T5272SN-375 T5276SND 2P X 2P, 100lb gauge, ¼" flare inlet/out, ¼" flare with check valve outlet, metal brackets, gold cap 2P X 2P, 100lb gauge, ¼" flare inlet/thru, ¼" flare with check valve outlet, glide brackets, gold cap 2P X 2P, 160lb gauge, 3 /8" flare outlet, ¼" flare check valve outlet gold cap 2P X 2P, 100lb & 30lb gauges, ¼" barb inlet/outlet + vertical manifold (4 barbs+ 1 flare), metal brackets, gold cap T5261SN N-1 Stainless steel bracket for mounting regulator S Bolt for stainless steel bracket part number N Metal bracket kit contains stainless steel bracket, bolt and lock washer Lockwasher, Mounting bracket 600GPS-01 Gauge protection boot for use with primary or secondary regulator guages GP Metal regulator gauge protector painted black (1-piece, welded) Repair Kits Repair kit for 3000 series 600GPS-01 Other regulator configurations may be available please call ! Repair kit for 5000 series 744GP Regulator Gauge Guard in use - 744GP 6 7

5 BIB RACKS Inclined with Louvered Panels BIB Racks - Inclined with Hole Panels Available in 1, 2, 3-Box Wide racks with top pump mounts and top shelves Syrup Pumps and Regulators (with glide brackets) slide securely onto panel louvers without hardware or tools Available in 1, 2, 3-Box Wide racks with top pump mounts and top shelves Pump Panels have 1/8" holes instead of slots Hole patterns accommodate all major pumps and components Powder Coated Steel tubing provides durable surface protection that is environmentally friendly and won t discolor Compatible footprint with other Taprite BIB Racks ETL Listed (NSF Std 2 Compliant) 2-BIFJG Powder Coated Steel provides durable surface protection and is environmentally friendly Compatible footprint with other Taprite BIB Racks ETL Listed (NSF Compliant) 1-BIFJ Model Number Model Number 1-BIFJG 1 Box Wide Inclined Shelf (15"W X 17"D X 12"H) 1-BIFJ 1 Box Wide Inclined Shelf (15"W X 17"D X 12"H) 2-BIFJG 2 Box Wide Inclined Shelf (27"W X 17"D X 12"H) 2-BIFJ 2 Box Wide Inclined Shelf (27"W X 17"D X 12"H) 3-BIFJG 3 Box Wide Inclined Shelf (39"W X 17"D X 12"H) 3-BIFJ 3 Box Inclined Shelf (39"W X 17"D X 12"H) 2-BPM6FJ 1-BPM4FJG 2-BPM6FJG 1 Box Wide, 4 Pumps (15"W X 24"H) 2 Box Wide, 6 Pumps (27"W X 24"H) 1-BPM4FJG 1-BPM4FJ 2-BPM6FJ 1 Box Wide Top Mount Double, 4 Pumps (15"W X 24"H) 2 Box Wide Top Mount Double, 6 Pumps (27"W X 24"H) 3-BPM8FJG 3 Box Wide, 8 Pumps (39"W X 24"H) 3-BPM8FJ 3 Box Wide Top Mount Double, 8 Pumps (39"W X 24"H) 1-BTSFJG 1 Box Wide Top Shelf (15"W X 17"D X 8½"H) 1-BTSFJ 1 Box Wide Top Shelf (15"W X 17"D X 8 ½"H) 2-BTSFJG 3-BTSFJG 2 Box Wide Top Shelf (27"W X 17"D X 8½"H) 3 Box Wide Top Shelf (39"W X 17"D X 8½"H) 2-BTSFJG C2-BTSFJ 2 Box Wide Top Shelf (28"W X 17"D X 8 ½" H) 3-BTSFJ 3 Box Wide Top Shelf (39"W X 17"D X 8 ½"H) 1-BTSFJ 2-CPMFJG 2 Box Wide Center Pump Mount with Glide (27"W X 17"D X 15 ½"H) non removable panel 3-CPMFJG 3 Box Wide Center Pump Mount with Glide (39"W X 17"D X 15 ½"H) non removable panel Please contact us regarding BIB Rack Assembly options! Please contact us regarding BIB Rack Assembly options! 3-CPMFJG 8 9

6 BIB RackS - Flat, Vertical With LOUVERED PANELS BIB RackS - Flat, Vertical with HOLE PANELS Louvered panels accommodates latest Pump Mount Glide Brackets Front/Back supports are 3/16" X 1" flat, no end caps required Front/Back supports have holes for routing tubing Holds 3 boxes (vertically positioned) per shelf All rack and accessories are Powder-Coated Black ETL Listed (NSF Std 2 Compliant) 2-BVFFJG Pump Panels have 1/8" holes instead of slots Front/Back supports 3/16" X 1", no end caps required Front/Back supports have holes for routing tubing Holds 3 boxes (vertically positioned) per shelf All rack and accessories are powder-coated black Model Number 2-BVFFJG 3-BVFFJG 2 Box Wide Vertical Flat with Glide (28W" X 17"D X 14"H) Holds 2 boxes (flat) or 3 boxes (on end) 3 Box Wide Vertical Flat with Glide (39"W X 17"D X 14"H) Holds 3 boxes (flat) or 4 boxes (on end) C2-BPM6FJG ETL Listed (NSF Std 2 Compliant) Model Number 2-BVFFJ 2 Box Wide Vertical Flat Shelf (28"W X 17"D X 14"H) Holds 2 Boxes (on side) or 3 Boxes (flat) 2-BVFFJ C2-BPM6FJG 3-BPM8FJG 2 box wide dual bar top mount, 6 pump capacity, w/glide panels (28 W X 24 H) 3 box wide dual bar top mount, 8 pump capacity, w/glide panels (39 W X 24 H) 3-BVFFJ 3 Box Wide Vertical Flat Shelf (39"W X 17"D X 14"H) Holds 3 Boxes (flat) or 4 Boxes (on end) C2-BTSFJG 2 Box Wide Top Shelf with Glide (28"W X 17"D X 8 ½"H ) 3-BTSFJG 2-CPMVFJG 3-CPMVFJG 3 Box Wide Top Shelf with Glide (39"W X 17"D X 8 ½"H) 2 Box Wide Vertical Center Pump Mount with Glide (28"W X 17"D X 17 ½"H) with removable panel 3 Box Wide Vertical Center Pump Mount with Glide (39"W X 17"D X 17 ½"H) with removable panel C2-BTSFJG C2-BVPM6FJ 3-BPM8FJ C2-BTSFJ 3-BTSFJ 2 Box Wide Top Mount-Double, 6 Pumps (28"W X 24"H) 3 Box Wide Top Mount-Double, 8 Pumps (39"W X 24"H) 2 Box Wide Top Shelf (28"W X 17"D X 8 ½"H) 3 Box Wide Top Shelf (39"W X 17"D X 8 ½"H) BVPM6FJ 3-CPMVFJG 2-BVFFJG Rack w/ boxes (Left) C2-BPM8FJG - Double Top Mount w/glide brackets & end mount pumps 2-BVFFJG Rack w/boxes (Middle) C2-BPM8FJG - Double Top Mount w/glide brackets & side mount pumps Please contact us regarding BIB Rack Assembly options! C2-BTSFJ 2-BVFFJG Rack w/boxes (Right) C2-BTSFJG - Top Shelf w/glide brackets Side mount pumps - right Questions? Contact us at sales@taprite.com 10 11

7 BIB Accessories BIB Accessories Taprite offers a complete line of accessories for your BIB Rack setups. Taprite accessories make it easier to adjust any setup for easier handling and convenience. Number Model Restraining Chain Wall Mount 2-PB 3-PB CH-220 CH Pump board (4" H X 11"W) for 2 Flojet pumps with installation screws Pump board (4"H X 18"W) for 3 Flojet pumps with installation screws (4"H X 18"W) Cylinder holder for 20lb with positive latch type lock. Mounts on wall, BIB rack, or truck bed. (17" X 16 3/4" X 8 3/4") Powder Coated Black CO2 Cylinder holder for 50 lb or 20 lb with positive latch type lock. Mounts on wall or rack. (21" X 4 " X 9 3/8") Powder Coated Black Black 2"plastic connectors for stacking BIB shelves Black 4" plastic connectors for mounting top pump mounts 2-PB 3-PB CH-220 RL-1 PR#517 RC-1S CM-1FJ CM-3FJ Adjustable leveler for BIB rack, Adjustable 3/8" to 1 1/4" Pump, FloJet with tube and CC connector CO2 Restraining Chain 3' w/clip Mount for Lancer and McCann carbonators. Mounts on wall or shelf. (13 3/4" X 19" X 13 1/4") Mount for Lancer and McCann carbonators. Stands on floor or can be mounted on wall. (8" X 19 1/4" X 12 1/4 ") Powder Coated Black Oetiker Clamp # Oetiker Clamp # 17.0 C2-SFFJ C3-SFFJ Spacer Frame for 2-BFFJ (17"D X 28"L X 11"H) Spacer Frame for 3-BFFJ (17"D X 39"L X 11"H) RL-1 CM-1FJ BIB Caster Locking Brake for BIB Caster Black Plastic end caps CH Please contact us regarding BIB Rack Assembly options! CM-3FJ ISA-1FJ ISA-2FJ RC-1 Incline adapter for converting flat shelf to incline shelf, Powder Coated Black Incline shelf adapter to mount on top of counter or on any flat shelf Powder Coated Black 3ft restraining chain for CO2 cylinders. Holds 20lb or 50lb cylinders to BIB rack Please contact us regarding BIB Rack Assembly options! C2-SFFJ Questions? Contact us at sales@taprite.com 12 13

8 ICE CHESTS ICE CHESTS Keep it Cool with Taprite Ice Chests! All stainless steel construction Guaranteed void-free, foamed-in-place insulation Available with sealed-in 7,8,9 circuit cold plates Ice chests available in Free Standing and Drop-In Sizes include 60, 80, 100lbs capacities. Free Standing Ice Chest - Stainless steel construction; complete with lids. FS FS " X 22" Ice chest with 7 circuit pre-mix cold plate Ice Capacity - 60 lbs. 15" X 22" Ice Chest with 8 circuit post-mix cold plate Ice Capacity 60 lbs Free Standing FS FS FS " X 23" Ice Chest with 7 circuit pre-mix cold plate Ice Capacity - 80lbs 21" X 23" Ice Chest with 9 circuit post-mix cold plate Ice Capacity - 80 lbs 21" X 23" Ice Chest with 9 circuit post-mix cold plate Ice Capcity lbs Drop-In Ice Chests - Stainless steel construction; complete with lids. Free Standing Options Options Ice Capacity A B C D lbs 22" 15" 14 ¼" 19 ¼" lbs 23" 21" 14 ¼" 19 ¼" lbs 23" 21" 18 ¼" 15 ¼" DI DI DI DI DI " X 22" Ice Chest with 7 circuit pre-mix cold plate Ice Capacity-60 lbs 15" X 22" Ice Chest with 8 circuit post-mix cold plate Ice Capacity 60 lbs 21" X 23" Ice Chest with 7 circuit pre-mix cold plate Ice Capacity 80 lbs 21" X 23" Ice Chest with 9 circuit post-mix cold plate Ice Capacity - 80 lbs. 21"X 23" Ice Chest with 9 circuit post-mix cold plate Ice Capacity 100 lbs. Knock Down Leg Stand Free Standing Combo Kits FS LS Free Standing 1522, 8 circuit, PSMX with knock down leg stand (one box) Drop-In Options Options Ice Capacity A B C D E lbs 23 7 /8" 16 7 /8" 14 ¼" 22" 15" lbs 24 ¾" 22 ¾" 14 ¼" 23" 21" lbs 24 ¾" 22 ¾" 18 ¼" 23" 21" FS LS Note: Ice chests in combo kits are NSF approved. Leg Stands LS-1522-KD LS-2123-KD Free Standing 2123, 9 circuit, PSMX with knock down leg stand (one box) 15" X 22" Knock Down 21" X 23" Knock Down Drop-In LS " X 23" Welded lb. capacity 14 15

9 Ice Chest Accessories Pepsi Carbonation Tester Taprite offers a wide range of quality Ice Chest accessories Top Lid for 2123 chest without cold plate (Ice-Tainer) Bottom Lid for 2123 chest without cold plate (Ice-Tainer) Bottom Lid for 2123 chest with cold plate Top Lid for 2123 chest with cold plate Top Lid for 1522 chest without cold plate (Ice-Tainer) Bottom Lid for 1522 chest without cold plate (Ice-Tainer) Bottom Lid for 1522 chest with cold plate Top Lid for 1522 chest with cold plate Top lid for 2036 chest Bottom lid for 2036 chest Stainless Steel Conversion Stand for 15""X 23" Drop-In to free standing unit. With 6" adjustable legs and removable access panel. (36"H X 17"W X 25"L) Stainless Steel Conversion Stand for 23"X 23" Drop-In to free standing unit. With 6" adjustable legs and removable access panel. (36"H X 25"W X 25"L) Stainless Steel Ice Beverage Dispensing Stand for Ice Drink Combos. With 6" adjustable legs. (36"H X 22"W X 30 1/2"L) The Taprite CO2 carbonation tester is a great maintenance tool when carbonation levels needs to be checked. Simply sample the soda in the canister, record the pressure and temperature, then cross-reference on the easy to read table. A Must Use for your maintenance program Black anodized aluminum cap for durability Factory calibrated for accuracy Easy to read carbonation table for quick diagnosis Gauge protection rubber boot to minimize wear & tear SP-1522 SP-2323 TF1522 Conversion Stand spacer plate 1522 Drop-In and Conversion Stands. (no tower) Conversion Stand spacer plate 2123 Drop-In and Conversion Stands. (no tower) Ice Shield for 1522 ice chests with coldplate CS CS2323 Questions? Contact us at sales@taprite.com 16 17

10 Hoses, Nipples, Diaphragm & Capsule Seat Assemblies regulator Trouble Shooting Nipple assembly, ¼ NPT right hand X CO2, 1 1/2" long 618L 6618BL-2 Nipple ¼" NPT right hand x ¼" NPT left hand Nipple ¼" NPT left hand X ¼" NPT left hand, 1 7/8" long Nipple assembly, CO 2 with O-ring left hand, 2 5/8 Long N Nipple assembly, 3" L, for nitrogen tank, with O-ring left hand Nipple Assembly with flat seal, left hand and CO2 nut Nipple Assembly with O-ring, left hand and CO2 Nut N Nipple Assembly & Nitrogen Nut Diaphragm assembly, 1.6" diameter ball and socket E Diaphragm assembly, 2" diameter ball and socket C Capsule seat assembly, ball and socket A 3 foot high pressure hose assembly, ¼" flare female X CO A 6 foot high pressure hose assembly, ¼" flare female (swivel) X CO NA 6 foot high pressure hose assembly, ¼" NPT female X CO A 9 foot high pressure hose assembly, ¼" flare female X CO Hose Assembly 18", ¼" NPT flare female X ¼" flare female, elbow C Problem Root Cause Solution Leak at top Bonnet Hole Capsule seat leak Reseat Capsule & apply proper torques (self centering -60 in/lbs; ball and socket -40 in/lbs) Diaphragm leak Improper capsule/diaph assy Replace capsule seat Reseat Diaphragm if self-centering type; replace diaphragm Check that capsule ball is inside diaphragm hex slot, tighten/align per assembly instructions Leak at the Bonnet thread Bonnet not seated properly Check for cross threading; Reseat bonnet and apply proper torque Loose bonnet Paint in thread (zinc only) Retighten bonnet with proper torque (zinc -190 in/lbs; poly-190in/lbs) Scrap Bonnet and replace with a new one Leak at the fittings Fitting not tight Remove fitting and apply teflon tape and loc-tite Install fitting until tight Crossed threads Remove fitting and replace with a new one Leak at tank fitting Fitting not tight on tank Retighten fitting until tight on tank valve Damaged or worn out seal Damaged nut or tank fitting Replace seal (o-ring/washer) Replace nut/tank fitting Leak at the safety Debris at sealing surface Remove safety and check the quad ring for debris & clean Reinstall safety components Unable to turn bonnet screw Adjustment screw threads Replace zinc bonnet assembly or top adjustment cap/knob are crossed Adjustment knob is stripped Replace poly bonnet assembly A Questions? Contact us at sales@taprite.com 18 19

11 3741 regulator assembly 3741 REGULATOR ASSEMBLY PARTS BREAKDOWN T5741PMHPBK Regulator assembly T5741PMHPBK REGULATOR ASSEMBLY PARTS BREAKDOWN ITEM REV C, PART NO PA A UD DESCRIPTION -SMALL ZINC BONNET, BLACK -SPRING RETAINER -HIGH PRESSURE DIAPHRAGM SPRING -DIAPHRAGM/BONNET GASKET -DIAPHRAGM REPAIR KIT - 1.6" BALL & SOCKET TYPE DIAPHRAGM, CAPSULE, AND O-RING (ITEM 12) PSI TANK GAUGE, LEFT HAND THREAD -1/4" SAE FLARE FITTING WITH BALL CHECK -CAPSULE SPRING -160 PSI GAUGE -CO2 TANK NIPPLE, WITH O-RING, LEFT HAND THREAD -CO2 TANK NUT -O-RING FOR TANK FITTING NOT NORMALLY REPLACED WHEN REPAIRING REGULATOR REV B, ITEM PART NO N A UD DESCRIPTION -POLY BONNET ASSEMBLY, BLACK CAP -HIGH PRESSURE DIAPHRAGM SPRING -DIAPHRAGM/BONNET GASKET -DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND O-RING (ITEM 11) PSI TANK GAUGE, LEFT HAND THREAD -1/4" SAE FLARE FITTING WITH BALL CHECK -CAPSULE SPRING -160 PSI GAUGE -CO2 TANK NIPPLE WITH O-RING, LEFT HAND THREAD -CO2 TANK NUT -O-RING FOR CO2 TANK FITTING NOT NORMALLY REPLACED WHEN REPAIRING REGULATOR 20 21

12 T5261sn regulator assembly T5272SNG regulator assembly PARTS BREAKDOWN PARTS BREAKDOWN ITEM REV B, PART NO B 5153B 5436A DESCRIPTION -POLY BONNET ASSEMBLY, GOLD CAP -HIGH PRESSURE DIAPHRAGM SPRING -DIAPHRAGM/BONNET GASKET -DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND FLAT SEAL -CAP, 1/4" SAE FLARE -FLARE WASHER -1/4" SAE FLARE FITTING -1/4" SAE FLARE FITTING WITH BALL CHECK -CAPSULE SPRING -100 PSI GAUGE -POLY BRACKET, SNAP FIT NOT NORMALLY REPLACED WHEN REPAIRING REGULATOR ITEM REV A, PART NO A B 5153B DESCRIPTION -POLY BONNET ASSEMBLY, GOLD CAP -HIGH PRESSURE DIAPHRAGM SPRING -DIAPHRAGM/BONNET GASKET -DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND FLAT SEAL -CAPSULE SPRING -1/4" SAE FLARE FITTING WITH BALL CHECK -POLY BRACKET, SNAP FIT -100 PSI GAUGE -CAP, 1/4" SAE FLARE -FLARE WASHER -1/4" SAE FLARE FITTING NOT NORMALLY REPLACED WHEN REPAIRING REGULATOR 22 23

13 Policies and Procedures Limited Warranty While many items can be shipped within hours of order placement, the standard lead time on build-to-stock items is 5-7 business days, not including transit time. Lead time on non-stock items, custom items and other items may vary. Complete orders received before 2:00 p.m. CST will be processed the same business day. LTL orders marked for same-day shipping must be received before noon. Small package orders marked for same-day shipping must be received before 2:00 p.m. CST. Same day shipping may not be available for TL or all LTL shipments. Minimum order/invoice amount is $200.00USD. Orders that do not meet the minimum are subject to a $25.00 service fee, which will be added to the total amount invoiced. Taprite will make every effort to ensure the accuracy of information in customer orders. We do reserve the right to make corrections or substitutions if errors occur. Prices and product specifications are subject to change without notice. Returns unrelated to product defects may be subject to a 25% restocking fee. Such items must be returned unused, in original condition and include original packaging, documentation, warranty cards, manuals, and accessories. No special order or custom merchandise will be accepted for return. Before merchandise is returned to Taprite, for any reason, a Return Material Authorization (RMA) number must be obtained from our Customer Service Department ( or sales@taprite.com). Please contact our Customer Service Department for further information on returns policy. Taprite warrants its products to be free of defects in material and or workmanship for a period of one (1) year, after the purchase by the customer from Taprite. During the one (1) year period the product must have been installed properly by a qualified technician and utilized in or on equipment compatible with said product. During the one (1) year period Taprite will, at its option, at no charge to the customer either repair or replace this product with a new or reconditioned product, but not labor to remove or re-install the product. This limited warranty does not include service to diagnose a claimed malfunction in this product at any location other than at Taprite headquarters, nor to repair damage due to accident or misuse, improper installation, incompatibility with chemicals or accessories not manufactured by Taprite. All other expressed and implied warranties for this product including the warranties of merchantability and fitness for a particular purpose are hereby disclaimed. (Some jurisdictions do not allow exclusion of implied warranties, nor limitations on how long an implied warranty lasts, so the above limitations may not apply to you) If this product is not free of defect as warranted above, your sole and exclusive remedy shall be repair or replacement as provided herein. In no event will Taprite be liable to customer or to third party for any damages in excess of the purchase price of the product. This limitation applies to damage of any kind including any direct or indirect damages, lost profits, lost investments capital or savings, other special incidental exemplary or consequential damages, whether for breach of contract, tort or otherwise, or whether arising out of the use or inability to use such product even if Taprite has been advised of the possibility of such damages or any other party. All catalogs and pricing editions produced by Taprite are for the wholesale beverage equipment trade only. All sales are strictly business-to-business

14 NOTES Helping Companies Profit from Every Pour! CO2 Regulators Bag In Box Racks Ice Chests Beer Faucets Party Pumps Beer Couplers Draft Towers Accessories 26

15 has proudly supplied the Soda Industry for over 65 years with Quality and Value! Contact us: taprite.com 3248 Northwestern Dr., San Antonio, TX