HVAC CONTROL PRODUCTS NORTH AMERICA. VG1000 Series Ball Valve Selection Guide

Transcription

1 HVAC CONTROL PRODUCTS NORTH AMERICA VG000 Series Ball Valve Selection Guide

2 Actuator Type Creating a more comfortable, safe and sustainable world. How to build factory assembly codes using this guide ASME Class 50 Flange Connections High Fluid Temperature Range Stainless Steel Trim Close Off Pressure 2-Way = 00 PSID 3-Way = 50 PSID Fluid Temperature Limits: -22 to 284 F (-30 to 40 C) Control Input Non-Spring Return M924 Spring Return Port A Open 2 20V M V Spring Actuator Options Valve Type Inch 2 /2 DN 65 SPDT, 5.0(2.9) 240 V Auxiliary Switches: 2 SPDT, 5.0(2.9) 240 V DN (mm) Cv Face to Face 3 DN 80 2 SPDT, 3.0(.5) 24 VAC 2-Way ANSI Flange 3-Way ANSI Flange 47 (29) narrow VG2A5KS VG8A5KS large VG2A5GS VG8A5GS 74 (47) narrow VG2A5KT VG8A5KT large VG2A5GT VG8A5GT 7 (74) narrow VG2A5KU VG8A5KU large VG2A5GU VG8A5GU 74 (47) narrow VG2A5LT VG8A5LT large VG2A5HT VG8A5HT 7 (74) narrow VG2A5LU VG8A5LU large VG2A5HU VG8A5HU 76 (88) narrow VG2A5LV VG8A5LV large VG2A5HV VG8A5HV 2 (05) narrow VG2A5LW VG8A5LW large VG2A5HW VG8A5HW 7 (74) large VG2A5JU VG8A5JU 4 DN (88) large VG2A5JV VG8A5JV 85 (75) narrow VG2A5MW VG8A5MW 5 in DN (82) narrow VG2A5NY VG8A5NY TABLE OF CONTENTS FACTORY ASSEMBLED MOTORIZED VALVE ASSEMBLIES 3 NPT Threaded, Standard Fluid Temperature Range 5 NPT Threaded, High Fluid Temperature Range 7 Sweat and Press Connected, Standard Fluid Temperature Range 9 ASME Class 50 Flange Connected, High Fluid Temperature Range FIELD ASSEMBLED MOTORIZED VALVE ASSEMBLIES Special Configurations: Non-Spring Return for Weather Shield Applications 2 Valid Field Assembly Combinations 3 Accessories RESOURCES 5 Sizing Water Valves Additional Actuator and Accessory Reference Information Additional Actuator and Accessory Reference Information Superior Wear Resistance Low Operating Torque 6 in DN (70) narrow VG2A5PZ VG8A5PZ MOTORIZED VALVE Double Protection Against Stem Leaks PTFE Stem Centering Bushing 5 to 20 Year Life Tested > 200,000 Cycles in Iron Oxide Contaminated Water = VALVE CODE + Example: VG8A5HU+92NGGA FACTORY +924AGA +924AGC +924GGA +924GGC +92NAGA +92NAGC +92NBAA +92NBAC +92NBGA +92NBGC +92NGGA +92NGGC +94NAGA +94NAGC Position Feedback: 0(2) to 0 VDC Position Feedback Power Requirements: 24 VAC +25%/-20%, Class 2, SELV 24 VAC +25%/-5%, WHY VDC +/- 0% SELECT JOHNSON CONTROLS 24 VAC +/- 20%, VDC +/- 0% 24 VAC +/- 25%, VDC VG000 +/- 0% SERIES BALL VALVES? 20 VAC +0%/-5% at 60 Hz 85 to 264 VAC at 50/60 Hz Most Complete Ball Valve Product Line in the HVAC Industry Electrical Connections: Screw Terminals High pressure ratings 48 in. (.2 m) 9 AWG Plenum Cable 20 in. (3.05 m) 9 AWG Rangeability Plenum Cable > 500 to /4 in. Spade Terminals 48 in. (.2 m) 8 AWG Equal Appliance Percentage Cable Flow Characteristics Weather Shield Options (For Field Assembly Only) Simplified Actuator Selection M Weather Shield M Weather Shield Note: Full chart not represented here 5% Graphite Filled PTFE Ball Seats, Dual EPDM Stem Seals Compact Size Direct Mounted Lower Cost than Globe Valve Solutions Six-Sigma Quality Program Industry Leading Test Programs Backed by Johnson Controls Industry Leading 5 yr. Warranty vg000 selection guide 2

3 Actuator Type Factory Assembled Motorized Valve Assemblies Standard Fluid Temperature Range NPT Threaded NPT Threaded Standard Fluid Temperature Range Stainless Steel Trim 200 PSID Close Off Pressure Fluid Temperature Limits: -22 to 22 F (-30 to 00 C) Control Input Floating Point without Timeout Non-Spring Return Spring Return Port A Open Spring Return Port A Closed VA904 VA9203 VA9208 VA9203 VA V Floating Point 24V and Floating Point High Speed and 85 to 264V Floating Point 85 to 264V 24V 20V 24V 85 to 264V 24V 20V 24V SPDT, 5.0(2.9) 240 V NPT THREADED, STANDARD FLUID TEMPERATURE RANGE VA904 Series Series VA9203 Series VA9208 Series Motorized Ball Valve Assembly with Weather Shield (field assembly) Valve Type Actuator Options Additional Actuator and Accessory Reference Information Auxiliary Switches: 2 SPDT, 5.0(2.9) 240 V 2 SPDT, 3.0(.5) 24 VAC Electrical Screw Terminals Connections: 20 in. Plenum Cable Inch DN (mm) 2 Cv 2-Way 3-Way /2 5 3/ /4 32 / (0.7) VG245AD VG845AD.9 (.2) VG245AE VG845AE 2.9 (.9) VG245AF VG845AF 4.7 (2.9) VG245AG VG845AG 7.4 (4.7) VG245AL VG845AL.7 (5.8) VG245AN VG845AN 4.7 (2.9) VG245BG VG845BG 7.4 (4.7) VG245BL VG845BL.7 (5.8) VG245BN VG845BN 7.4 (4.7) VG245CL VG845CL.7 (7.4) VG245CN VG845CN 8.7 (9.4) VG245CP VG845CP.7 (7.4) VG245DN VG845DN 8.7 (.7) VG245DP VG845DP 29.2 (4.6) VG245DR VG845DR 8.7 (.7) VG245EP VG845EP 29.2 (8.7) VG245ER VG845ER 46.8 (23.4) VG245ES VG845ES 29.2 (8.7) VG245FR VG845FR 46.8 (29.2) VG245FS VG845FS 73.7 (36.8) VG245FT VG845FT MOTORIZED VALVE 3 = VALVE CODE + Example: VG24AD+9T4AGA FACTORY +9T4AGA +9A4AGA +9T4IGA +9A4IGA +9T4GGA +9A4GGA +90HGA +90HGC +90HGA +90HGC +90HGA +90HGC +923AGA +923AGB +923BUA +923BUB +923BGA +923BGB +923GGA +923GGB +928AGA +938AGC +938BAA +938BAC +938BGA +938BGC +928GGA +938GGC +943AGA +943AGB +943BUA +943BUB +943BGA +943BGB +943GGA +943GGB +948AGA +958AGC +958BAA +958BAC +958BGA +958BGC +948GGA +958GGC Position Feedback: 0(2) to 0 VDC Position Feedback Power Requirements: 24 VAC +25%/-20%, Class 2, SELV 24 VAC +25%/-5%, Class 2, SELV 24 VAC +/- 20%, VDC +/- 0% 24 VAC +/- 25%, VDC +/- 0% 20 VAC +0%/-5% at 60 Hz 85 to 264 VAC at 50/60 Hz Electrical Connections: 20 in. (3.05 m) 9 AWG Plenum Cable /4 in. Spade Terminals 48 in. (.2 m) 8 AWG Appliance Cable Weather Shield Options (For Field Assembly Only) M optional switch kit 2XSPDT For 3-Way valves, the first Cv listed is for Port A (Coil). The second Cv listed in parenthesis is for Port B (Bypass). 2 For ball valve and actuator factory assemblies combine valve code number and actuator valve assembly code. Example: VG24AD+9T4AGA is /2 inch two-way ball valve,.2 Cv, NPT end connections, plated brass trim with VA904 Series non-spring return electric actuator with 24 VAC floating point control without time out with screw terminal electrical connections. 3 vg000 selection guide 4

4 Actuator Type Factory Assembled Motorized Valve Assemblies High Fluid Temperature Range NPT Threaded NPT Threaded High Fluid Temperature Range Stainless Steel Trim 200 PSID Close Off Pressure Fluid Temperature Limits: -22 to 284 F (-30 to 40 C) Control Input Floating Point without Timeout Non-Spring Return Spring Return Port A Open Spring Return Port A Closed VA904 VA9203 VA9208 VA9203 VA V Floating Point 24V and Floating Point High Speed and 85 to 264V Floating Point 85 to 264V 24V 20V 24V 85 to 264V 24V 20V 24V SPDT, 5.0(2.9) 240 V NPT THREADED, HIGH FLUID TEMPERATURE RANGE VA904 Series Series VA9203 Series VA9208 Series Valve Type Actuator Options Inch /2 5 3/ /4 32 / Auxiliary Switches: 2 SPDT, 5.0(2.9) 240 V 2 SPDT, 3.0(.5) 24 VAC Electrical Screw Terminals Connections: 20 in. Plenum Cable (mm) Cv 2 2-Way 3-Way Stainless Steel Trim DN MOTORIZED VALVE = 3.2 (0.7) VG245AD VG845AD.9 (.2) VG245AE VG845AE 2.9 (.9) VG245AF VG845AF 4.7 (2.9) VG245AG VG845AG 7.4 (4.7) VG245AL VG845AL.7 (5.8) VG245AN VG845AN 4.7 (2.9) VG245BG VG845BG 7.4 (4.7) VG245BL VG845BL.7 (5.8) VG245BN VG845BN 7.4 (4.7) VG245CL VG845CL.7 (7.4) VG245CN VG845CN 8.7 (9.4) VG245CP VG845CP.7 (7.4) VG245DN VG845DN 8.7 (.7) VG245DP VG845DP 29.2 (4.6) VG245DR VG845DR 8.7 (.7) VG245EP VG845EP 29.2 (8.7) VG245ER VG845ER 46.8 (23.4) VG245ES VG845ES 29.2 (8.7) VG245FR VG845FR 46.8 (29.2) VG245FS VG845FS 73.7 (36.8) VG245FT VG845FT VALVE CODE Example: VG245ADH9T4AGA + FACTORY ASSEMBLY CODE H9T4AGA H9A4AGA H9T4IGA H9A4IGA H9T4GGA H9A4GGA H90HGA H90HGC H90HGA H90HGC H90HGA H90HGC H923AGA H923AGB H923BUA H923BUB H923BGA H923BGB H923GGA H923GGB H928AGA H938AGC H938BAA H938BAC H938BGA H938BGC H928GGA H938GGC H943AGA H943AGB H943BUA H943BUB H943BGA H943BGB H943GGA H943GGB H948AGA H958AGC H958BAA H958BAC H958BGA H958BGC H948GGA H958GGC Position Feedback: 0(2) to 0 VDC Position Feedback Motorized Ball Valve Assembly with Weather Shield (field assembly) Additional Actuator and Accessory Reference Information Power Requirements: 24 VAC +25%/-20%, Class 2, SELV 24 VAC +25%/-5%, Class 2, SELV 24 VAC +/- 20%, VDC +/- 0% 24 VAC +/- 25%, VDC +/- 0% 20 VAC +0%/-5% at 60 Hz 85 to 264 VAC at 50/60 Hz Electrical Connections: 20 in. (3.05 m) 9 AWG Plenum Cable /4 in. Spade Terminals 48 in. (.2 m) 8 AWG Appliance Cable Weather Shield Options (For Field Assembly Only) M optional switch kit 2XSPDT For 3-Way valves, the first Cv listed is for Port A (Coil). The second Cv listed in parenthesis is for Port B (Bypass) 2 For Ball valve and actuator factory assemblies combine valve code number and actuator valve assembly code. Example: VG245ADH9T4AGA is /2 inch two-way ball valve,.2 Cv, NPT end connections, Stainless Steel trim with VA904 Series non-spring return electric actuator with 24 VAC floating point control without time out with screw terminal electrical connections. 5 vg000 selection guide 6

5 Actuator Type SWEAT AND PRESS CONNECTED, STANDARD FLUID TEMPERATURE RANGE Factory Assembled Motorized Valve Assemblies Standard Fluid Temperature Range Sweat and Press Connected Sweat connected Press connected VA904 Series VA9203 Series Motorized Ball Valve Assembly with Weather Shield (field assembly) Valve Type Actuator Options Additional Actuator and Accessory Reference Information Inch /2 5 3/ Sweat and Press Connected Standard Fluid Temperature Range Stainless Steel Trim 200 PSID Close Off Pressure Fluid Temperature Limits: -22 to 22 F (-30 to 00 C) DN (mm) Cv 2 MOTORIZED VALVE 3 Auxiliary Switches: SPDT, 5.0(2.9) 240 V 2 SPDT, 5.0(2.9) 240 V 2 SPDT, 3.0(.5) 24 VAC Floating Point without Timeout Non-Spring Return Spring Return Port A Open Spring Return Port A Closed VA904 VA9203 VA9203 Electrical Screw Terminals Connections: 20 in. Plenum Cable Sweat Connections Press Connections 2-Way 3-Way 2-Way 3-Way.2 (0.7) VG275AD VG875AD VG295AD VG895AD.9 (.2) VG275AE VG875AE VG295AE VG895AE 2.9 (.9) VG275AF VG875AF VG295AF VG895AF 4.7 (2.9) VG275AG VG875AG VG295AG VG895AG 7.4 (4.7) VG275AL VG875AL VG295AL VG895AL.7 (5.8) VG275AN VG875AN VG295AN VG895AN 4.7 (2.9) VG275BG VG875BG VG295BG VG895BG 7.4 (4.7) VG275BL VG875BL VG295BL VG895BL.7 (5.8) VG275BN VG875BN VG295BN VG895BN 7.4 (4.7) VG275CL VG875CL VG295CL VG895CL.7 (7.4) VG275CN VG875CN VG295CN VG895CN 8.7 (9.4) VG275CP VG875CP VG295CP VG895CP = VALVE CODE + Example: VG895AD+9T4AGA Position Feedback: Power Requirements: Control Input FACTORY +9T4AGA +9A4AGA +9T4IGA 0(2) to 0 VDC Position Feedback 24 VAC +25%/-20%, Class 2, SELV 24 VAC +25%/-5%, Class 2, SELV 24 VAC +/- 20%, VDC +/- 0% 24 VAC +/- 25%, VDC +/- 0% 20 VAC +0%/-5% at 60 Hz 85 to 264 VAC at 50/60 Hz Electrical Connections: 20 in. (3.05 m) 9 AWG Plenum Cable /4 in. Spade Terminals 48 in. (.2 m) 8 AWG Appliance Cable Weather Shield Options (For Field Assembly Only) +9A4IGA +9T4GGA +9A4GGA +923AGA 20V +923BUA 24V +923BGA +923GGA +943AGA 20V +943BUA 24V +943BGA +943GGA M For 3-Way valves, the first Cv listed is for Port A (Coil). The second Cv listed in parenthesis is for Port B (Bypass) 2 For ball valve and actuator factory assemblies combine valve code number and actuator valve assembly code. Example: VG895AD+9T4AGA is /2 inch three-way ball valve,.2 Cv, Press end connections, stainless steel trim with non-spring return electric actuator with 24 VAC floating point control without time out with screw terminal electrical connections. 7 vg000 selection guide 8

6 Actuator Type ASME CLASS 50 FLANGE CONNECTED, HIGH FLUID TEMPERATURE RANGE Factory Assembled Motorized Valve Assemblies High Fluid Temperature Range ASME Class 50 Flange Connected M924 Actuator Installed on 2 /2 thru 6 inch. ASME Flanged Ball Valves using M Linkage M9220 Actuator Installed on 2 /2 thru 6 inch. ASME Flanged Ball Valves using M Linkage Field Assembled M924 Actuator, M Linkage and M Weather Shield on ASME Flanged Ball Valve Field Assembled M9220 Actuator, M Linkage and M Weather Shield on Flanged Ball Valve (field assembly) Actuator Options Additional Actuator and Accessory Reference Information Valve Type Inch DN (mm) 2 /2 DN 65 3 DN 80 4 DN 00 ASME Class 50 Flange Connections High Fluid Temperature Range Stainless Steel Trim Close Off Pressure 2-Way = 00 PSID 3-Way = 50 PSID Fluid Temperature Limits: -22 to 284 F (-30 to 40 C) Cv 47 (29) 74 (47) 7 (74) 74 (47) 7 (74) 76 (88) 2 (05) SPDT, 5.0(2.9) 240 V Non-Spring Return Spring Return Port A Open 2 Spring Return Port A Closed 2 M924 M9220 M9220 Auxiliary Switches: 2 SPDT, 5.0(2.9) 240 V Face to Face 2 SPDT, 3.0(.5) 24 VAC 2-Way ANSI Flange 3-Way ANSI Flange narrow VG2A5KS VG8A5KS large VG2A5GS VG8A5GS narrow VG2A5KT VG8A5KT large VG2A5GT VG8A5GT narrow VG2A5KU VG8A5KU large VG2A5GU VG8A5GU narrow VG2A5LT VG8A5LT large VG2A5HT VG8A5HT narrow VG2A5LU VG8A5LU large VG2A5HU VG8A5HU narrow VG2A5LV VG8A5LV large VG2A5HV VG8A5HV narrow VG2A5LW VG8A5LW large VG2A5HW VG8A5HW 20V 24V 20V 24V 7 (74) large VG2A5JU VG8A5JU 76 (88) large VG2A5JV VG8A5JV 85 (75) narrow VG2A5MW VG8A5MW 5 in DN (82) narrow VG2A5NY VG8A5NY 6 in DN (70) narrow VG2A5PZ VG8A5PZ MOTORIZED VALVE = VALVE CODE + Example: VG8A5HU+92NGGA FACTORY Control Input +924AGA +924AGC +924GGA +924GGC +92NAGA +92NAGC +92NBAA +92NBAC +92NBGA +92NBGC +92NGGA +92NGGC +94NAGA +94NAGC +94NBAA +94NBAC +94NBGA +94NBGC +94NGGA +94NGGC Position Feedback: 0(2) to 0 VDC Position Feedback Power Requirements: 24 VAC +25%/-20%, Class 2, SELV 24 VAC +25%/-5%, VDC +/- 0% 24 VAC +/- 20%, VDC +/- 0% 24 VAC +/- 25%, VDC +/- 0% 20 VAC +0%/-5% at 60 Hz 85 to 264 VAC at 50/60 Hz Electrical Connections: Screw Terminals 48 in. (.2 m) 9 AWG Plenum Cable 20 in. (3.05 m) 9 AWG Plenum Cable /4 in. Spade Terminals 48 in. (.2 m) 8 AWG Appliance Cable Weather Shield Options (For Field Assembly Only) M Weather Shield M Weather Shield The M924 assemblies include the M Linkage 2 The M9220 assemblies include the M Linkage 3 For 3-Way valves, the first Cv listed is for Port A (Coil). The second Cv listed in parenthesis is for Port B (Bypass) 4 For Ball Valve and actuator factory assemblies combine valve code number and actuator valve assembly code. Example: VG8A5HU+92NGGA is a 3 inch, 3-Way ball valve, 7 Cv thru Port A and 74 Cv thru Port B, ASME Class 50 flanged end connections, stainless steel trim with M9220 spring return actuator, with 0(2) to 0 VDC or 0(4) to 20ma proportional control with 48 in. (.2m) 8 AWG Appliance Cable, assembled for spring return port A open. 9 vg000 selection guide 0

7 SPECIAL CONFIGURATIONS: NON-SPRING RETURN ACTUATORS FOR WEATHER SHIELD APPLICATIONS Key to the Factory Assembly Codes to Actuator and Accessory Mounting Kits Actuator and Accessories being Mounted M924 AGA-2 with M linkage M924 AGC-2 with M linkage M924 GGA-2 with M linkage M924 GGC-2 with M linkage M9220-AGA-3 with M linkage M9220-AGC-3 with M linkage M9220-BAA-3 with M linkage M9220-BAC-3 with M linkage M9220-BGA-3 with M linkage M9220-BGC-3 with M linkage M9220-GGA-3 with M linkage M9220-GGC-3 with M linkage VA904-AGA-2S VA904-AGA-2S with M VA904-AGA-3S VA904-AGA-3S with M VA904-GGA-2S VA904-GGA-2S with M VA904-GGA-3S VA904-GGA-3S with M VA904-IGA-2S VA904-IGA-2S with M VA904-IGA-3S VA904-IGA-3S with M VA9203-AGA-2Z VA9203-AGA-2Z with M VA9203-AGB-2Z VA9203-AGB-2Z with M VA9203-BGA-2 VA9203-BGA-2 with M VA9203-BGB-2 VA9203-BGB-2 with M Factory Assembly Code +924AGA +924AGC +924GGA +924GGC +92NAGA or +94NAGA +92NAGC or +94NAGC +92NBAA or +94NBAA +92NBAC or +94NBAC +92NBGA or +94NBGA +92NBGC or +94NBGC +92NGGA or +94NGGA +92NGGC or +94NGGC +9A4AGA H9A4AGA +9T4AGA H9T4AGA +9A4GGA H9A4GGA +9T4GGA H9T4GGA +9A4IGA H9A4IGA +9T4IGA H9T4IGA +923AGA or +943AGA H923AGA or H943AGA +923AGB or +943AGB H923AGB or H943AGB +923BGA or +943BGA H923BGA or H943BGA +923BGB or +943BGB H923BGB or H943BGB Actuator and Accessories being Mounted VA9203-BUA-2 VA9203-BUA-2 with M VA9203-BUB-2 VA9203-BUB-2 with M VA9203-GGA-2Z VA9203-GGA-2Z with M VA9203-GGB-2Z VA9203-GGB-2Z with M VA9208-AGA-2 VA9208-AGA-2 with M VA9208-AGC-3 VA9208-AGC-3 with M VA9208-BAA-3 VA9208-BAA-3 with M VA9208-BAC-3 VA9208-BAC-3 with M VA9208-BGA-3 VA9208-BGA-3 with M VA9208-BGC-3 VA9208-BGC-3 with M VA9208-GGA-2 VA9208-GGA-2 with M VA9208-GGC-3 VA9208-GGC-3 with M VA930-HGA-2 VA930-HGA-2 with M switch kit VA930-HGA-2 with M VA930-HGA-2 with M thermal barrier and with M switch kit Factory Assembly Code +923BUA or +943BUA H923BUA or H943BUA +923BUB or +943BUB H923BUB or H943BUB +923GGA or +943GGA H923GGA or H943GGA +923GGB or +943GGB H923GGB or H943GGB +928AGA or +948AGA H928AGA or H948AGA +938AGC or +958AGC H938AGC or H958AGC +938BAA or +958BAA H938BAA or H958BAA +938BAC or +958BAC H938BAC or H958BAC +938BGA or +958BGA H938BGA or H958BGA +938BGC or +958BGC H938BGC or H958BGC +928GGA or +948GGA H928GGA or H948GGA +938GGC or +958GGC H938GGC or H958GGC +90HGA +90HGC H90HGA H90HGC Valid Field Assembly Combinations VG000 Series Ball Valves, M(VA)9000 Series, Linkage Kits, Weather Shields Valve Size in. (DN) /2 (DN5) 3/4 (DN20) (DN25) /4 (DN32) /2 (DN40) 2 (DN50) NPT End Connection VG245Ax VG845Ax VG245Bx VG845Bx VG245Cx VG845Cx VG245Dx VG845Dx VG245Ex VG845Ex VG245Fx VG845Fx Valve Code Number Sweat End Connection VG275Ax VG875Ax VG275Bx VG875Bx VG275Cx VG875Cx Press End Connection VG295Ax VG895Ax VG295Bx VG895Bx VG295Cx VG895Cx Actuator Base Code Number VA904 2 Linkage Kit Code Number Fluid Temperatures (<22 F [00 C]) M904 2 M M9300 M VA9203 M9203 M VA904 2 M904 2 M M9300 M VA9203 M9203 M VA904² M904² M M9300 M VA9203 M9203 M M9300 M VA9208 M9208 M M9300 M VA9208 M9208 M M9300 M VA9208 Fluid Temperatures ( 22 F [00 C]) Weather Shield M M M M M M M M M M M M M9208 M Valid Ball Valve, Electric Actuator, Linkage, and Weathershield Combinations (for Field Assembly) Link Kit Code Valve Size in. (DN) Valve Code Number Actuator Base Number Optional Weathershield Code Number Number 2-/2 (DN65) 3 (DN80) 4 (DN00) VG2A5Gx, VG8A5Gx VG2A5Kx, VG8A5Kx VG2A5Hx, VG8A5Hx VG2A5Lx, VG8A5Lx VG2A5Jx, VG8A5Jx VG2A5MZ, VG8A5MZ 5 (DN25) VG2A5NY, VG8A5NY 6 (DN50) VG2A5PZ, VG8A5PZ M924 M M M9220 M M M924 M M M9220 M M M924 M M M9220 M M M924 M M M9220 M M M924 M M M9220 M M VA904, M904,, and M9300 Series are non-spring return, and VA9203, M9203, VA9208, and M9208 Series are spring return. Note: VA904, M904,, M9300, VA9203, M9203, VA9208, and M9208 have a maximum fluid temperature limit of 22 F (00 C) unless used with the M Thermal Barrier. 2 To avoid excessive wear or drive time on the motor for VA904 and M904 use a controller and/or software that provides a timeout function to remove the signal at the end of rotation (stall). The IGx and GGx models have an automatic shutoff to avoid excessive wear or drive time on the motor. vg000 selection guide 2

8 VG000 Series Ball Valve Accessories VG000 Series Ball Valve Accessories Code Number Description Qty Code Number Description Qty Ball Valve Linkages Weather Shields for Ball Valves M Ball Valve Linkage for Non-Spring Return, 2 /2 to 6 in. VG000 flanged valves with mm square stem M NEMA 3R Weather Shield for VG000 Series Non-Spring Return M Linkage M Ball Valve Linkage for Spring Return, 2 /2 to 6 in. VG000 flanged Valves with mm square stem M NEMA 3R Weather Shield for VG000 Series Spring Ball Valves with M Linkage ACCESSORIES M VG000 Ball Valve linkage (for use with M904 Series actuators only) M Weather Shield Kit for VG000 Series Ball Valve application of M(VA)904, M930, M(VA)9203, and M(VA)9208 Series Electric Spring Return M Ball Valve Linkage Kit for applying M9203, and M9208 Series Electric to VG000 Series Valves Miscellaneous M Thermal Barrier Kit for M Ball Valve Linkage. Extends M(VA)904, M(VA)9300, M(VA)9203, and M(VA)9208 Series Electric Spring Return applications to include low pressure steam M Position Indicator for VG000 Series Ball Valve Applications (For use with, VA9203, VA9208 and VA930 Series ) 5 M Ball Valve Linkage Kit for applying M930 Series Electric to VG000 Series Valves M Threaded Conduit Adapters for /2 in. electrician s fittings (For use with M(VA)9208, and M9220 Series ) 5 3 vg000 selection guide 4

9 Sizing Water Valves Two-Position Applications: The valve is normally sized with the largest Cv available. Modulating Applications: The valve should be sized to produce the required Cv with a pressure drop of one to two times the pressure drop across the coil at rated flow. Example: Coil requires 4 gpm at 5 psi pressure drop. The valve should be selected to provide 4 gpm with a pressure drop across the valve between 5 and 0 psi (one to two times the pressure drop across the coil at the required flow). Solution: From the table below a /2 in., 4.7 Cv valve will provide 4. gpm flow at a pressure drop across the valve of 9 psi. This valve should be selected as the valve will provide the needed flow with a pressure drop between one and two times the pressure drop across the coil at the required flow. Sizing Water Valves Two-Position Applications: The valve is normally sized with the largest Cv available. Modulating Applications: The valve should be sized to produce the required Cv with a pressure drop of one to two times the pressure drop across the coil at rated flow. Example: Coil requires 80 gpm at 4 psi pressure drop. The valve should be selected to provide 80 gpm with a pressure drop across the valve between 4 and 8 psi (one to two times the pressure drop across the coil at the required flow). Solution: From the table below a 74 Cv valve will provide 8 gpm flow at a pressure drop across the valve of 6 psi. This valve should be selected as the valve will provide the needed flow with a pressure drop between one and two times the pressure drop across the coil at the required flow. VG000 Ball Valves /2 through 2 inch FLOW RATE IN GPM (GALLONS PER MINUTE) VG000 Flanged Ball Valves 2-/2 through 6 inch FLOW RATE IN GPM (GALLONS PER MINUTE) SIZING WATER VALVES Cv Pressure Drop (PSI) Cv Pressure Drop (PSI) , , , ,005, ,046, ,085, ,23, ,60, ,96, ,230, ,264, ,297, ,329, ,360, ,39, ,42, ,450, ,479, ,507, ,535, ,562, ,588,906 5 vg000 selection guide 6

10 Notes Notes NOTES 7 vg000 selection guide 8

11 Better performance starts with a better valve. Your choice in valves has never been broader, or better. Johnson Controls provides the flexibility to fit a wide range of applications, from unit ventilators to VAV boxes to chillers. Each one tested to deliver long life and leak-proof performance. We build better valves because a better performing building that costs less to operate starts here. Johnson Controls and the Johnson Controls logo are registered trademarks of Johnson Controls or its affiliates, in the United States of America and/or other counties. Printed on recycled paper. 206 Johnson Controls P.O. Box 423, Milwaukee, WI 5320 Printed in USA PUBL-6799 (Rev. 9/6)