7 www.lum-techlighting.com FLUSH MOUNT & DISK LIGHT
CMED-605 DoB 5 Ceiling Puck CMED-607 DoB 7 Ceiling Puck [CMED-605 : 5 ] (5.5"dia. x 1") Ceiling Puck Ceiling Flush Mount [ CMED-607 : 7 ] (7"dia. x 1") Ceiling Puck DESCRIPTION The 5 and 7 DoB Ceiling Pucks are designed for use in new construction or for retrofitting 4 and 6 IC/Airtight and Non-IC recessed downlights. The Pucks Flush Mount over 3.5 or 4 J-box on ceiling or on the wall. Optional mounting kits and E26 and GU24 adapters are available for easy can installation. High efficacy DoB (Driver on Board) Module (Campcell ) with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location. Mounting Flush Mount over 3.5 or 4 J-box on ceiling or on the wall. Optional retrofit kits available for 4 (5MTL) and 6 (7MTL) recessed down lights. Optional E26 and GU24 Adapters are also available for easy wiring. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Finishes White, Black, contact factory for other finishes. Electrical Connection Power Supply on-board with stated-of-the-art customized IC chip (DoB). 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 0W max load dimmer switch. Limited Warranty Module: 5 years/50k hours Product: 3 years cetlus Wet Location California Title 24 Item No. CMED-605 CMED-607 Input Voltage Wattage (+/-5%) Lumen (+/-5%) Efficacy (LPW) CRI (Typical) CCT (Color +/-5%) Dimming Module Environment o SPECIFICATION 12 W 13W 680 lm 850 lm 56.7 lm/w 65.4 lm/w 80, 90 2700K, 00K, 3500K, 4000K Triac 5 yr/50k hr Wet Location Trailing Edge Dimmer - Lutron Model Numbers : Diva DVCL Series Diva DVCL Series Nova T* NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 o Leading Edge Dimmer - Lutron Model Numbers : Diva DVELV Series Skylark SELV Series Nova T* NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers 3/17/17
OPTIONS For CMED-605 For CMED-607 #4MTL #6MTL E26 Adapter GU24 Adapter Model -CRI Color Temp.* Finish* -Options CMED-605 = 5, 12W DoB Ceiling Puck CMED-607 = 7, 13W DoB Ceiling Puck Example : CMED-605-8WH-4MTL-E26A -8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K 35 = 3500K 40 = 4000K WH = White BK = Black -4MTL = 5CP kit for 4 Recess cans -6MTL = 7CP kit for 6 Recess cans -E26A = Med Base Adapter -GU24A = GU24 Adapter * Consult factory for other Color Temperatures and Finishes
CMED-707(Special Order Fixtures) DoB 7 Ceiling Cloud Series with Optional E26 Adapter for Keyless Lamp Holders CMED-707PD (Special Order Fixtures) DoB 7 Ceiling Cloud Series with Pull Chain Switch and Optional E26 Adapter for Keyless Lamp Holders CMED-707 Lamp holder Outlet box CMED-707PD LD7CC Socket Bracket Mounted screw Keyholes Housing Diffuser (with pull chain switch) J-box Mounting Optional Adapter for Keyless Lamp Holders DESCRIPTION The 7 DoB Ceiling Clouds are designed for use in new construction or replacing old fixtures over a 4 J-box. An optional Adapter for Keyless Lamp Holders is also available for easy installation. High efficacy DoB (Driver on Board) Module (Campcell) with integral triac dimming capability. The tool free, twist-on optical diffusing shade produces high lumen transmission and even illumination. Suitable for Wet Location. Electrical Connection; direct, DoB module with integrated IC chip imbed on board. 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 0W max load dimmer switch. Optional Adapter for Keyless Lamp Holders available for easy installation. Limited Warranty Module: 5 years/50k hours Product: 3 years cetlus Wet Location California Title 24 SPECIFICATION Input Voltage Wattage (+/-5%) 12 W Lumen (+/-5%) 800 lm Efficacy (LPW) 69 lm/w CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 00K, 3500K 4000K Dimming Triac Housing White Painted Steel High Impact White Shade Translucent Plastic Shade Diameter 6-7/8 (175mm) Assembled Height 3-11/16 (94mm) Module 5 yr/ 50K hr Environment Wet Location 03/21/17
Optional Keyless Lamp Holder Adapter 19.2mm 89.6 (3-1/2 ) 144 (5-11/16 ) 7MTLE26 Model -CRI Color Temp.* Finish* CMED-707 = 7, 12W Ceiling Cloud CMED-707PD = 7, 12W Ceiling Cloud W/ Pull Chain Example : CMED-707-8-7MTLE26-8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K 35 = 3500K 40 = 4000K BLANK = White -Options - 7MTLE26 = E26 Adapter for Keyless Lamp Holders * Consult factory for other Color Temperatures and Finishes
SFR4 DoB 4 Ceiling Square with Optional recessed can Mounting Kits and socket Adapters SFR6 DoB 6 Ceiling Square with Optional recessed can Mounting Kits and socket Adapters [ 4 ] SFR4 Ceiling Square Flush Mount Recess Can Mounting Kits [ 6 ] SFR6 Electrical Connection Power Supply on-board with stated-of-the-art customized IC chip (DoB). 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. Available in 2700K, 00K, 3500K, 4000K color temperatures. Mounting on 4 J-box with 2 screws from base plate. Optional E26 and GU24 Adapters and Mounting Kits are available for mounting over 4 and 6 IC / Non-IC type Recessed cans from below. Finish WH : White Contact factory for custom colors Limited Warranty Module: 5 years/50k hours Product: 3 years ccsa-us Damp Location California Title 24 OPTIONS Specification for SFR4 for SFR6 Model # Input Voltage SFR4 SFR6 Lens Dimension 4-1/16 Square 6-7/16 Square Housing Dimension 4-15/16 7-5/16 Height 1/2 1/2 Wattage 10W 15W Lumen 6 (80CRI) 980 (80CRI) #4MTL #6MTL E26 Adapter GU24 Adapter Efficacy (LPW) 63 (00K) 65 (00K) Lens Plastic Plastic Description DoB 4 Ceiling Square DoB 6 Ceiling Square Environment Wet location Wet location Model -CRI Color Temp.* Finish* -Options SFR4 = 4, 10W DoB Ceiling Square SFR6 = 6, 15W DoB Ceiling Square Example : SFR6-8-6MTL-E26A -8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K 35 = 3500K 40 = 4000K blank = Standard White -4MTL = SFR4 kit for 4 Recess cans -6MTL = SFR6 kit for 6 Recess cans -E26A = Med Base Adapter -GU24A = GU24 Adapter * Consult factory for other Color Temperatures and Finishes 3/21/17
DFR4 DoB 4 Ceiling Dome with Optional recessed can Mounting Kits and socket Adapters DFR56 DoB 5 /6 Ceiling Dome with Optional recessed can Mounting Kits and socket Adapters [ 4 ] DFR4 Ceiling Flush Mount Recess Can Mounting Kits [ 5-6 ] DFR56 Electrical Connection Power Supply on-board with stated-of-the-art customized IC chip (DoB). 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the module and switch from common inrush currents. Recommended for use max. fixtures per run on a 600W max load dimmer switch and 15 fixtures per dimmer switches for 0W loads. Available 00K color temperature. Consult factory for other CCT offerings. Mounting on 4 J-box with 2 screws from base plate. Optional E26 and GU24 Adapters and Mounting Kits are available for mounting over 4, 5 and 6 IC / Non-IC type Recessed cans from below. OPTIONS for DFR4 for DFR56 #4MTL #6MTL E26 Adapter GU24 Adapter Finish WH : White Contact factory for custom colors Limited Warranty Module: 5 years/50k hours Product: 3 years ccsa-us Wet Location California Title 24 Specification Model # Input Voltage Lens Dimension Housing Dimension Height Wattage Lumen Efficacy (LPW) Beam Anlge Lens Description Environment DFR4 3-7/8 5-7/18 1-1/4 12W 717 (80CRI) 609 (90CRI) 63 (00K) 51 (00K) 107 J-box Mounting White Translucent White Plastic DoB 4 Ceiling Dome Wet location Black Ground DFR56 J-Box (by others) 4 bracket Mounted screw Keyholes Housing Lens 5-1/2 7-7/1 1-1/4 15W 972 (80CRI) 863 (90CRI) 65 (00K) 58 (00K) 110 Translucent White Plastic DoB 5 /6 Ceiling Dome Wet location Model -CRI Color Temp.* Finish* -Options DFR4 = 4, 12W DoB Ceiling Dome DFR56 = 5 /6, 15W DoB Ceiling Dome Example : DFR4-8-4MTL-E26A -8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K 35 = 3500K 40 = 4000K blank = Standard White -4MTL = DFR4 kit for 4 Recess cans -6MTL = DFR56 kit for 5 /6 Recess cans -E26A = Med Base Adapter -GU24A = GU24 Adapter * Consult factory for other Color Temperatures and Finishes Rev#2 03/21/17
DFR9 (Special Order Fixtures) DoB 9 Ceiling Dome with Optional recessed can Mounting Kits and socket Adapters Ø9-1/2 (Ø241mm) 1-1/4 (33mm) Electrical Connection Power Supply on-board with stated-of-the-art customized IC chip (DoB). 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the module and switch from common inrush currents. Recommended for use max. fixtures per run on a 600W max load dimmer switch and 15 fixtures per dimmer switches for 0W loads. Available in 2700K, 00K, 3500K, 4000K color temperature. Mounting on 4 J-box with 2 screws from base plate. Optional E26 and GU24 Adapters and Mounting Kit are available for mounting 9 IC / Non-IC type Recessed cans from below. OPTIONS for DFR9 Ø7-5/8 (Ø193.75mm) Finish WH : White BK : Black CH : Chrome BN : Brush Nickel Limited Warranty Module: 5 years/50k hours Product: 3 years ccsa-us Wet Location California Title 24 Specification Model # Input Voltage Lens Dimension Housing Dimension J-box Mounting White Black Ground DFR9 7-5/8 9-1/2 Recess Can Mounting Kits J-Box (by others) 4 bracket Mounted screw Keyholes Disk Light Lens 6MTL E26 Adapter GU24 Adapter Height Wattage Lumen Efficacy (LPW) 1-1/4 20W W 1200 (90CRI) 2000 (90CRI) 60 (00K) 67 (00K) Beam Anlge 110 Lens Translucent White Plastic Description DoB 9 Ceiling Dome Environment Wet location Model -Wattage -CRI Color Temp.* Finish* -Options DFR9 = 9, DoB Ceiling Dome -20 = 20 watts - = watts -8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K blank = Standard White BK = Black -6MTL = DFR9 kit for 9 Recess cans -E26A = Med Base Adapter 35 = 3500K CH = Chrome -GU24A = GU24 Adapter 40 = 4000K BN = Brush Nickel Example : DFR9--9-6MTL * Consult factory for other Color Temperatures and Finishes 03/31/17
VNT Series DoB Linear Cloud Series 24, and 48 lengths 6 (153mm) 24 48 ( 610mm 915mm 1220mm) 3 (76mm) DESCRIPTION The DoB Linear Clouds are designed for use in Bathrooms, hallways, Stairways, hospitals, etc. Ideal for new construction or replacing old fixtures over a J-box and can be ceiling or wall mounted. The High efficacy DoB (Driver on Board) Module is integrated with an AC direct driver chip and does not require an external driver which increases reliability. The circuit also has integral triac dimming capability for added flexibility. The acrylic optical diffusing shade produces high lumen transmission and even illumination with no hot spots. Suitable for Damp Location. Translucent white acrylic diffusing shade provides soft, even illumination with no hot spots. Mounting can be wall mounted or horizontally or vertically mounted on the wall. module with integral IC chip on board and 10~100% triac dimmable with most of leading and trailing edge dimmer switches on the market. CSA approved and designed for hard wiring in a Junction box for ceiling or wall mounting. Circuit designed to protect against Inrush Current Surges. Damp Location approved. Limited Warranty Module: 5 years/50k hours Product: 3 years ccsa-us Damp Location California Title 24 Specification Model # Dimension Input Voltage Wattage Output Lumens (from diffuser) CRI (Typical) Color (+/-5%) Finish VNT24 24 L x 6 W x 3 H 20W 1,400 lm 80, 90 2700K - 5000K White VNT L x 6 W x 3 H W 2,100 lm 80, 90 2700K - 5000K White VNT48 48 L x 6 W x 3 H 40W 2,800 lm 80, 90 2700K - 5000K White Model -CRI Color Temp.* VNT24 = 24, 20W Linear Cloud VNT =, W Linear Cloud VNT48 = 48, 40W Linear Cloud Example : VNT-8-8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K 35 = 3500K 40 = 4000K 50 = 5000K * Consult factory for other Color Temperatures and Finishes 3/21/17
CMED (Special Order Fixtures) DoB Ceiling Flush Mount [ CMED 111(4) ] [ CMED 211(4,6) ] Ceiling Flush Mount [ CMED 312(4,7) ] [ CMED 412(4,7) ] [ CMED 511(3,5) ] Electrical Connection Power Supply on-board with stated-of-the-art customized IC chip (DoB). 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the module and switch from common inrush currents. Recommended for use max. fixtures per run on a 600W max load dimmer switch, 15 fixtures per run on a 0W max load dimmer switch. Available 2700K, 00K, 3500K, 4000K color temperature. Optional step down transformer (TS27-12) converts 277VAC to. Special Order Fixtures Contact Factory for Lead Times. Limited Warranty Module: 5 years/50k hours Product: 3 years cetlus Wet Location California Title 24 Model CMED-111 = 11 Square CMED-114 = 14 Square CMED-211 = 11 Round CMED-214 = 14 Round CMED-216 = 16 Round CMED-312 = 12 Round CMED-314 = 14 Round CMED-317 = 17 Round CMED-412 = 12 Round CMED-414 = 14 Round CMED-417 = 17 Round -CRI / Color Temp.* -827 = 80 CRI / 2700K -8 = 80 CRI / 00K -835 = 80 CRI / 3500K -840 = 80 CRI / 4000K -Finishes* -WH = White -BK = Black -BN = Brush Nickel -SN = Satin Nickel -CH = Chrome Specification Model # CMED-111 CMED-114 CMED-211 CMED-214 CMED-216 CMED-312 CMED-314 CMED-317 CMED-412 CMED-414 Assembled Height 3-1/8 3-1/8 3-1/2 4 4-7/16 3-1/2 4-1/4 4-1/4 3-5/16 3-7/8 Wattage / Lumens 15W / 950 lm 23W / 1,0 lm 15W / 950 lm 23W / 1,0 lm W / 2,000 lm 15W / 890 lm 23W / 1,200 lm W / 2,000 lm 15W / 950 lm 23W / 1,0 lm Shade Plastic Plastic Plastic Plastic CMED-511 = 11 Round CMED-513 = 13 Round CMED-515 = 15 Round Example : CMED-111-827-WH * Consult factory for other Color Temperatures and Finishes CMED-417 CMED-511 CMED-513 CMED-515 4-5/8 5-11/16 5-1/2 5-1/2 W / 2,000 lm 15W / 950 lm 23W / 1,0 lm W / 2,000 lm Glass 3/24/17
T-Grid Linear Light Split design with module and T-Grid bracket DESCRIPTION linear light has an added unique combination of module and T-Grid bracket. Featuring new generation green lighting solutions, the luminaires deliver up to 1 lm/w, enlarging the lumen spread over the entire space. It is available in 2 and 4 units with a choice of outputs 10W or 20W, making for glare-free and uniform distribution of light. linear lights offer lighting designers more freedom to design since the led module can follow the ceiling elements in many different ways both across as well as lengthways. Spilt design with module and T-Grid bracket MOUNTING The linear light is a lighting solution that integrated into T-Grid for suspended ceilings, allow our product to be fully and seamlessly integrated or retrofit into standard 15/16" T-Grid of suspended ceiling. It can replace selected cross tees of the grid ceiling suspension system where light is desired. It can be parallelly connected 3pcs per power supply. + T-Grid bracket Linear Module APPLICATION Considering different dimension and functions of a room, the linear light will at any point provide the desired light level. Your room no longer has to be ruled by a single fixture in the ceiling, providing a flexible general lighting solution for commercial and institutional environments such as offices, classrooms, retail and public space. REGULATORY & VOLUNTARY QUALIFICATIONS US Patent UL Listed Pending Yes DIMENSION 23.96 2FT DLC Qualifications Yes 4FT LM79 Report Yes 47.96 Damp Rated Yes 15/16" Length Sizes ORDERING INFORMATION Product category - Size - Dimming - Fixture wattage - CCT TB-2-D-M-40LDTGW Power Supply * TB - 2 =2FT - 4 =4FT - D=0-10V dimming - M =10W / 20W - =00k - 35=3500k - 40=4000k - 50=5000k LDTGW = W Power Supply for 2 T-Grid Light LDTG60W = 60W Power Supply for 4 T-Grid Light * 1 driver will power up to 3 fixtures. 08/22/18
TB-2-D-M-XX PERFORMANCE SUMMARY Efficacy: 1LPW LUMINOUS INTENSITY DISTRIBUTION DIAGRAM TB-2-D-M-XX Luminous Flux:10lm -150 -/+180 150 Input Power: 10 Watts CRI:Ra>80-120 120 DLC CCT: 3500K/4000K/5000K Input Voltage: 100-277 VAC Dimension:15/16" 2FT Beam Angle:120 Driver:1 For 3 Standard Warranty: 5 Years Standard Lifetime: Designed to L70 minimum 50,000 hours -90 0 90 70 140-60 210 60 UNIT:cd 0 C0/180,1.3-350 C/210,127.4 C60/240,120.0 0 C90 /270,113.6 AVERAGE BEAM ANGLE(50%):122.8 DEG AVERAGE ILLUMINANCE CURVE Flux out:765.9 lm Dimming: 0-10V Dimming Signal Current: <2mA 1.219m 69. 17, 229. 5lx 9. 97c m Recommended Dimmers: DIVA-DVTV(LUTRON), NOVA-NTSTV-TV Fixture measurement and weight are round up. 2m 25. 70, 85. lx 606. 91c m PHOTOMETRY 3m 11., 37. 90lx 910. c m Fixture photometry has been conducted accredited testing laboratory in accordance with IESNA LM-79-08. IESNA LM-79-08 specifies the entire luminaire as the source resulting in a fixture efficiency of 100%. Result may vary per actual order. 4m 5m 6. 6, 21. 32lx 4. 112, 13. 64lx 1213. 82c m 1517. 27c m Height Eavg,Emax Angle:113.22 deg Diameter Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance. ZONAL FLUX DIAGRAM ZONAL LUMEN SUMMARY Υ 10 20 40 50 60 70 80 90 DEG C0 C45 C90 C135 C180 C225 c270 c315 0.3 337.3 3.0 337.2 1.2 338.4 3.3 338.8 329.2 324.4 317.8 325.0 3.3 326.2 318.1 325.3 8.7 1.0 290.3 2.5 311.7 3.5 290.0 2.8 278.2 268.4 250.9 269.5 1.1 270.2 252.8 269.6 240.1 227.6 205.6 229.0 243.5 2.2 206.5 229.6 194.5 180.3 153.2 182.8 198.7 182.8 154.6 182.4 143.7 127.4 96.49 1.0 148.6 129.9 96.09 1.9 91.91 73.78 38.68 76.83 96.57 76.27 38.26 74.64 59.16 40.08 3.115 41.60 59.70 40.68 3.064 40.96 LUMINOUS INTENSITY:cd T 0-10 10-20 20- -40 40-50 50-60 60-70 70-80 80-90 φzone φtotal lum,lamp 32.45 32.45 2.5,2.47 93.95 126.4 9.74,9.61 144.8 271.2 20.9,20.6 178.8 450.0.7,.2 191.6 641.7 49.4,48.8 182.3 823.9 63.5,62.6 151.4 975.3 75.1,74.1 103.9 1079 83.1,82 55.27 11 87.4,86.2 UNIT:lm COEFFICIENTS OF UTILIZATION ppc 80% 70% 50% % 10% 0 pw 50% % 10% 50% % 10% 50% % 10% 50% % 10% 50% % 10% 0 pfc 20% 20% 20% 20% 20% 0 RCR RCR:Room Cavlty Ratlo (CU) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 115 98 84 74 65 58 52 47 39 115 93 77 65 56 49 43 38 31 115 89 71 58 49 32 25 23 110 94 81 71 63 56 50 45 41 38 35 110 90 75 63 54 47 37 33 27 110 86 69 57 48 41 31 25 22 103 88 76 66 59 52 47 43 39 33 103 84 70 60 52 45 40 35 32 29 26 103 81 66 54 46 39 27 24 22 96 82 71 62 55 49 44 40 37 31 96 79 66 56 49 43 38 25 96 77 62 52 44 38 33 29 26 23 21 89 76 66 58 51 46 41 38 35 32 89 74 62 53 46 41 32 29 26 24 89 72 59 50 32 25 22 20 86 69 56 47 39 29 26 23 21 19
TB-4-D-M-XX PERFORMANCE SUMMARY Efficacy: 1LPW LUMINOUS INTENSITY DISTRIBUTION DIAGRAM TB-4-D-M-XX Luminous Flux: 2600lm Input Power: 20 Watts CRI:Ra>80-120 -150 -/+180 150 120 DLC CCT: 3500K/4000K/5000K -90 0 90 Input Voltage: 100-277 VAC Dimension:15/16" 4FT Beam Angle:120 Driver:1 For 3-60 140 0 0 560-700 0 AVERAGE BEAM ANGLE(50%):123. 3 DEG 60 UNIT:cd C0/180,1.4 C/210,127.7 C60/240,120.7 C90/270,114.2 Standard Warranty: 5 Years Standard Lifetime: Designed to L70 minimum 50,000 hours AVERAGE ILLUMINANCE CURVE Flux out:1575 lm Dimming: 0-10v dimming Signal Current: <2mA Recommended Dimmers: DIVA-DVTV(LUTRON), NOVA-NTSTV-TV Fixture measurement and weight are round up. 1.219m 131. 7, 458. 4l x 375. 73c m 2m 48. 93, 170. 3l x 616. 35c m PHOTOMETRY 3m 21. 75, 75. 71l x 924. 52c m Fixture photometry has been conducted accredited testing laboratory in accordance with IESNA LM-79-08. IESNA LM-79-08 specifies the entire luminaire as the source resulting in a fixture efficiency of 100%. Result may vary per actual order. 4m 5m 12. 23,. 59l x 7. 829,27. 26 lx 1232. 70c m 1540. 87c m Height Eavg,Emax Angle:114.03 deg Diameter Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance. ZONAL FLUX DIAGRAM ZONAL LUMEN SUMMARY Υ 10 20 40 50 60 70 80 90 DEG C0 C45 C90 C135 C180 C225 c270 c315 676.7 674.4 669.6 673.6 676.5 670.0 665.4 671.4 657.0 651.7 638.6 649.3 656.6 6.9 629.0 645.1 616.3 607.6 584.6 605.3 616.7 596.0 571.5 599.3 556.9 545.3 512.3 5.3 558.1 531.6 496.5 535.3 482.3 465.5 0.7 461.7 482.6 451.1 405.7 455.5 391.8 370.4 315.2 6.0 393.6 356.4 1.2 2.0 290.4 263.6 197.4 259.2 292.0 250.4 185.5 256.4 186.4 153.7 76.81 150.7 187.9 145.4 71.93 150.4 115.3 80.55 4.205 83.72 120.4 80.27 3.233 78.81 LUMINOUS INTENSITY:cd T 0-10 10-20 20- -40 40-50 50-60 60-70 70-80 80-90 φzone φtotal lum,lamp 64.54 64.54 2.5,2.64 186.9 251.5 9.73,10.3 8.5 539.9 20.9,22.1 356.6 896.5.7,.6 383.0 10 49.5,52.3 4.5 1644 63.6,67.2 2.4 1946 75.3,79.5 206.8 2153 83.3,88 109.3 2262 87.6,92.5 UNIT:lm COEFFICIENTS OF UTILIZATION ppc 80% 70% 50% % 10% 0 pw 50% % 10% 50% % 10% 50% % 10% 50% % 10% 50% % 10% 0 pfc 20% 20% 20% 20% 20% 0 RCR RCR:Room Cavlty Ratlo (CU) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 123 105 90 79 69 62 55 50 45 0.38 123 00 83 70 60 52 46 41 33 0. 123 95 76 62 52 45 39 27 24 118 101 87 76 67 60 54 48 44 40 37 118 96 80 68 58 51 45 40 32 29 118 92 74 61 51 44 38 33 26 24 110 94 81 71 63 56 50 46 38 35 110 90 75 64 55 48 38 31 110 87 70 58 49 37 32 29 26 23 103 88 76 66 59 52 47 43 39 33 103 85 71 61 52 46 40 33 27 103 82 67 56 47 41 35 31 25 22 96 82 71 62 55 49 44 40 37 32 96 79 67 57 50 43 39 35 31 26 96 77 64 53 45 39 27 24 22 92 74 60 50 31 25 22 20
RTF4 4, Low Profile Surface Mount Fixture DESCRIPTION 2-1/2 (63.5mm) 4-3/4 (120mm) 7/8 (23.5mm) The RTF4 is a compact 4, Surface Mount, DoB fixture and is designed for flush mounting onto ceilings. It is easily installed onto a standard 4 J-Box with the included twist and lock mounting bracket. Lumen output and distribution is comparable to a 65 watts incandescent lamp. ENERGY STAR qualified. For use in temperatures up to 40 (104 F). Suitable for Wet Locations. 120V DoB module with integrated IC chip imbedded on board with 10-100% Triac dimming with most of leading and trailing edge dimmer switches. Circuit designed to protect against Inrush Current Surges. Recommended for use max. fixtures per run on 600W loaded dimmer switches and 15 lamps per dimmer switches 0W loaded. Available 2700K, 00K, 3500K, 4000K color temperature. Suitable for Wet Locations. SPECIFICATION Input Voltage Diffuser Diameter (D) 2-1/2 Overall Diameter (L) 4-3/4 Depth (H) 7/8 Wattage 7W Lumen 540 lm (80CRI) Efficacy (LPW) 77 lm/w Beam Angle 100 J-box Mounting Outlet box (by others) ccsa-us Certificated California Title 24 Wet Location Limited Warranty Module: 5 years/50k hours White Black Ground Mounting Plate Keyholes Mounting Screws (2X) RTF4 Housing -Watts -CRI Color Temp.* Finish RTF4-7 = 7W -8 = 80 CRI -9 = 90 CRI 27 = 2700K = 00K WH = White BK = Black 40 = 4000K 50 = 5000K Example : RTF4-7-8-WH * Consult factory for other Color Temperatures and Finishes 09/26/17
OLN series Triac and 0-10V Luminaire with Continous Low-Surface or Pendant Mount Bracket Surface [ TOP VIEW ] 4-1/8 (105mm) Surface [ SIDE VIEW ] * Contact Factory for IES File 2-7/16 (62.6mm) DESCRIPTION Construction Aluminum extruded body with powder-coated finish for corrosion resistance. Two different length 2ft rated 20W and 4ft rated 40W. Special designed structure for easy installation and shock resistance. Electrical modules operated by AC direct with no SMPS Operating free voltage 120V~277V Dimmable for Triac and 0-10V Dimmable EMI (Title 47) Class A System power factor 90% and THD 20% Operating by AC power modules (DOB) with no driver on the fixtures. Designed driving circuit to prevent inrush current hurting circuit in switches and modules. As of no SMPS in the fixtures and cool running temperature, warranted long life by 60,000 hours. Finish Aluminum White Black Warranty 5 years of lamp life. 23-7/16 (596mm) [2ft] or 46-15/16 (1,192mm) [4ft] Ideal for most indoor surface mount applications. Anodized aluminum extrusion housing for superior strength and thermal management. White translucent Polycarbonate diffuser allows high transmission with no hot spots. Mounting-optional kit # Pendant (for Down rod) T-NUT # Surface mount SMT-KIT CSA Certified. * For exact application, Consult with factory or installation manual. # Continuous- row mount (End feed kit) ECAP HARN SPECIFICATION Length Wattage (+ /-5%) L u m e n (+ /-5%) Input Voltage 2ft 20 W 2,000 lm 120V~277V AC 4ft 40 W 4,000 lm C o l o r (+ /-5%) C R I (Typical) D im m in g L am p L ife E nvironm ent 00K, 3500K, 4000K 80, 90 Triac, 0-10V 5 yrs. Indoor, Damp Trailing Edge Dimmer - Lutron Model Numbers : Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer - Lutron Model Numbers : Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers Available aircraft cable Assembled to ceiling JBox direct End cap kit Daisy harness ORDERING INFORMATION Housing Dimmer Watts Mounting Color Temp. Optional OLN -U : PIR Sensor -Z : 0-10V -20 : 20W (2ft) -40 : 40W (4ft) -S : Surface -P : Pendant - : 00K -35 : 3500K -40 : 4000K -T - NUT : Down rod nut -SMT-KIT : Surface mount kit -E C A P : End feed kit -H AR N : End feed kit Example : OLN-U-20-S-
SLN Series Triac and 0-10V Luminaire with Continuous Linear Surface Mount Surface 4.02 (120mm) DESCRIPTION Ideal for most indoor surface mount applications. Anodized aluminum extrusion housing for superior strength and thermal management. White transluscent Polycarbonate diffuser allows high transmission with no hot spots. Construction Aluminum extruded body with powder-coated finish for corrosion resistance. Two different length 4ft rated 40W and 8ft rated 80W. Special designed structure for easy installation and shock resistance. Electrical modules operated by AC direct with no SMPS Operating free voltage 120V~277V Dimmable for Triac and 0-10V Dimmable EMI (Title 47) Class A System Power factor 90% and THD 20% Operating by AC power modules (DOB) with no driver on the fixtures. Designed driving circuit to prevent inrush current hurting circuit in switches and modules. As of no SMPS in the fixtures and cool running temperatures, warranted long life by 60,000 hours. Finish Aluminum White Black Warranty 5 years of lamp life. CSA Certified. Model Length SLN -48 = 48 Inches -96 = 96 Inches Wattage -40W (48 In.) -80W (96 In.) -CRI -8 = 80-9 = 90 Color Temp. = 00K 35 = 3500K 40 = 4000K 48 (1,219mm) [4ft] or [8ft] Driver 96 (2,438mm) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) 3.07 (78mm) [ SECTION VIEW ] Length SPECIFICATION 4ft 8ft Wattage (+/-5%) Lumen (+/-5%) 40 W 4,000 lm 80W 8,000 lm Input Voltage Color (+/-5%) CRI (Typical) Dimming Lamp Life Environment 120V~277VAC 00K, 3500K, 4000K 80, 90 Triac, 0-10V 5 yrs. Indoor, Damp Trailing Edge Dimmer - Lutron Model Numbers : Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer - Lutron Model Numbers : Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers Finish -AL = Aluminum -WH = White -BK = Black 04/17/18