Foil Winding Machine The machine is designed to wind LV coils for transformer. It can handle one or two strips, and two rolls of insulation paper with guiding / tensioning for each. Description UPI offers three models of foil winding machines: the USS, USD and UF(x). We also offer customer- tailored models. The USS model is one conductor foil winding machine while the USD is two foils winding machine. When winding, conductor strips and insulation paper are automatically arranged by the sensor and the hydraulic device. The machine is also equipped with an automatic TIG device to weld conductor and lead. The machine has an automatic electronic Foil & Strip layering system for low voltage of Distribution Transformer. The machine provides variable speed that was controlled by frequence converter. This model is very fast for manufacturing transformer low voltage coil section. Features Programmable controls with touch screen monitor Conduction strip un- coiler Allows the quick set up of coil on expanding mandrel with hydraulic system. Insulation paper un- coiler Allows the quick set up of a insulation on expanding mandrel with air expanded shafts. Tension The powder brake maintains suitable tension on the foil & Insulation paper. Alignment The foil is kept performance aligned with a beam edge position controller resulting that the system is simple, effective to provide consistent edge.
Foil cutting device provides a straight edge for Buss lead attachment. End fill Insulation Paper supply device TIG torch travels on a motorized track with water cooled. Paper slitting units Applications For LV Coil Pole mounted Transformer. Pad mounted Transformer. Distribution Transformer. Options Mandrel ( user specification ) Coil Car Customer modifications for special applications. Common Specifications Main drive Alignment system Foil inside diameter Insulation paper inside diameter 76mm (3") End fill insulation paper width Welding of leads AC power AC motor with variable frequency converter Electromagnetic actuated brake Edge position control with hydraulic cylinder 400mm or 500mm or user requirement 10 to 70mm TIG welding Supply air pressure 6 kg/ cm 2 3 Phase 220V or 380V 50/ 60Hz [ User requirement ]
Model Specifications USS The models depending on coil width. USS450, USS600N, USS900N ITEM USS450N USS600N USS900N Number of foils 1 1 1 Working width 450 mm 600 mm 900 mm Thickness of strip 0.3 to 2.0 mm 0.3 to 2.0 mm 0.3 to 1.5 mm Maximum coil diameter 700 mm 700 mm 700 mm Spindle center height mm mm mm Speed range 0-30 rpm 0-30 rpm 0-30 rpm Power requirement 3 phase 7.5KVA 3 phase 7.5KVA 3 phase 10KVA USD The models depending on coil width. USD450N, USD600N, USD900N ITEM USS450N USS600N USS900N Number of foils 2 2 2 Working width 450 mm 600 mm 900 mm Thickness of strip 0.3 to 2.0 mm 0.3 to 2.0 mm 0.3 to 1.5 mm Maximum coil diameter 700 mm 700 mm 700 mm Spindle center height mm mm mm Speed range 0-30 rpm 0-30 rpm 0-30 rpm Power requirement 3 phase 7.5KVA 3 phase 10KVA 3 phase 12KVA
Foil Winding Machine { UF(X) 150H TYPE } [ Cast resin, Molded transformer ] Description The machine has an automatic electronic Foil & Strip layering system for high voltage of cast resin transformer. The machine provides tension with torque controled. This model is very fast for manufacturing transformer high voltage coil section. When winding, conductor strips are automatically arranged by the sensor and hydraulic device. The machine is also equipped with an automatic TIG device to weld conductor and lead. ITEM UFS150H UFD150H Number of Foils 1 2 Number of Insulation Paper 2 2 Power Requirement 3Ø 27KVA 3Ø 45KVA
Common specification Al sheet 0.1-1.5mm Copper 0.1-1.0mm Inside diameter 76/ 305 Conductor Outside diameter 450/ 900 Weight of coil 100kg/ 300kg Width of coil 20-150mm Tension 0.3kk/ mm2 Polyester film 0.016-0.2mm Insulation Width of film 25-160mm Inside diameter 58m/ m Weight of Film 40kg Inside diameter 250mm min. Winding Outside diameter 1200mm max. Coil length min. 400mm, max. 1400mm Winding speed 200m/ min max. Features Programmable controls with touch screen monitor Conduction strip un- coiler. Allows the quick set up of coil on expanding mandrel. Sheet cleaning unit with felt type De- burring unit Film insulation un- coiler Allows the quick set up of a insulation on expanding mandrel with air expanded shafts. Tension Auto tension system with torque control and denser. Alignment The foil is kept performance aligned with a beam edge position controller resulting that the system is simple, effective to provide consistent edge. TIG welding system Options Coil Car Customer modifications for special applications.