RIGID, FOLDING AND OFFSET ROTARY TILLERS The strongest and most reliable farming solutions. ROTARY TILLERS
ROTARY TILLERS RANGE Maschio Group has been manufacturing rotary tillers for the last 50 years: its products became since a long time the name for quality and strength, helping farmers all over the world as unstoppable allied on field! MG Experience offers now simple but innovative machineries, with an incredible range of options and customizations. INDEX The strenght in the name: Maschio 4 Rigid rotary tillers with side chain drive up to 60 hp 6 Rigid rotary tillers with side gear drive up to 80 hp 8 Rigid rotary tillers up to 130 hp 10 Rigid rotary tillers up to 250 hp 12 Hydraulic offset rotary tillers 14 Folding rotary tiller PUMA 16 Folding rotary tiller PANTERA 18 Choice of roller 20 Optional features 22 COBRA and CONDOR: the predators! 23 2
Maschio offers a full range of rotary tillers tailored to the need of every farmer: from the small machine for hobby or horticultural growers to the tough professional implement made to cope with all soils and crop residues! Sturdy structure, the care for details and the low power absorption are common features of all the machineries. The heavy-duty barrel type bearings ensure an extended life (+ 30% over traditional taper roller bearing) and no-maintenance compare to the spherical ones. Their self-aligning and sturdy structure allow to keep up with heavy working loads. The multispeed gearbox with interchargeble gears allow to change the speed of rotor revolution. Folding frame equipment are equipped with side cam PTO shafts. Both shafts avoid damages on side gearbox independently from each other. This means that one side stops the other can keep working. Cam PTO shaft is the best protection system available on the market for transmission: the cam-based system reduces the efforts on transmission gear box when the admissible load capacity is exceed. It can hold up a weight untill 2000 kn. PTO shaft with slip clutch avoid damages to the transmission gearbox. Compare to the shear pin PTO shaft, the slip clutch reduces downtime resulting from shear bolt replacement. Two metal sealing rings floating in position and two elastomeric load rings provide positive sealing contact allowing lubricant retention and excluding any contamination (water, mud, dust). 1 PTO regime 540 rpm 4 blades per flange Chain side drive PTO regime 1000 rpm 6 blades per flange Gear side drive Number of speeds for transmission PTO shaft with shearing bolt limiter Category of three point hitch 3
ROTARY TILLERS RANGE THE STRENGHT IN THE NAME: MASCHIO The speedbox is available as standard feature or on demand on many models: using it properly is possible to reduce fuel consumption on easiest soil or break-up harder clods. Spring dampened bonnet with rod pusher: with this solution is possible to break down larger clods in many parts, preventing them to bounce back from the bonnet. To get finer and finer tillage from the A model to the upper range, all the machine are featured with this element. State-of-the-art laser technology in used cutting metal sheets. The best homogeneity of all parts for an outstanding assembly precision are guaranteed by severes quality checks. Blades for rotary tillers and power harrow are made in a dedicated plant of the group. Automatized robotic lines forge high quality 4
Maschio means farmers first choice whenever they need a rotary tiller. Key factory marks are: products careful design; high functionality and high performance even for smaller machines. Several technical solutions guarantee a perfect tillage in any soil condition, obtaining a perfect seedbed refinement in just a single pass! Rear levelling bonnet is shaped on all model with a progressive angle and is larger than the actual working width: this helps to get always the best soil levelling. boron steel to produce resistant and durable tools. That s how original Maschio parts born! The depth skids have an easy-tohandle toothed bar device for the set up: this is how is possible to get a finer depth adjustment comparing to the standard bolt system adopted by many competitors! 5
ROTARY TILLERS RANGE MODELS WITH SIDE CHAIN DRIVE UP TO 60 HP Single speed gearbox with oil level built-in on cap. (model A ) Detail of the side offset by wheel and screw on the E model Side chain drive in oil bath ( L model) The small size rotary tillers are well suited for gardening, horticulture and inter-row soil tillage in orchards and vineyards. It s the perfect match of low power tractors. All models have a single speed reduction box and a side oil bath chain drive with automatic tensioning system. Except for the A model, all the machine in this range can work both in central position or in adjustable offset to the right side. The telescopic shaft and 3 point hitch mounted on skid make this possible. The E model is easily adjustable with a wheel on left side. 6
L 1 W 1 OPT A 1 OPT Note: model 160 and 180 have 2 cat. 3 point hitch E 1 OPT Note: model 160 and 180 have 2 cat. 3 point hitch RANGE FEATURES Model L Working width ft 2 ¾-3 ½-3 ¾-4 Weight lb 237-291-309-326 Category I Tractor power hp 10-25 PTO shaft shearbolt protection Cardan with slip clutch Chain transmission Gear transmission Transmission speed 540 rpm Single speed reducer Gearbox Adjustable third point mech. 4 blades per flange 6 blades per flange Max work depth in 6 Rollers For further details on each machinery visit our website accessing by the QR code standard upon request W A E 3 ½-3 ¾-4 ¾-5 ½ 375-428-481-534 I 15-40 3-4 -4 ½-5 ¼-6 507-551-606-628-683 I I I II II 30-60 4-4 ½ -5 ¼ -6 580-628-671-725 I I II II 30-60 540 rpm 540 rpm 540 rpm mech. mech. 7 8 8 not available 7
ROTARY TILLERS RANGE MODELS WITH SIDE GEAR DRIVE UP TO 80 HP The H and U models have all the technical features of upper class rotary tillers, even belonging to the small machines range. These models can be used in all intensive and professional applications. Transmission is the key element of these two machines: the central gearbox is multispeed (feature on demand for model H ), side gear drive and waterproof rotor hubs allow to work in harder condition with the minimum stress on all mechanical components. The U model can be matched to 3 different types of rear rollers (cage, spikes or packer) or is available in basic depth skids version. Waterproof mechanical sealing of rotor hubs is made by 2 metal rings facing each other and divided by a thin layer of oil. This system isolates totally the bearings on rotor hubs from external environment. Water, dust and mud are not any more a problem, making possible also to work in submerged fields! 8
H 1 * Version 125 and 145 have I category hitch U 4 RANGE FEATURES Model Working width Weight Category Tractor power Cardan with slip clutch Chain transmission Gear transmission Transmission speed Single speed reducer Gearbox Adjustable third point 6 blades per flange Max work depth Rollers ft lb hp in H U 4-4 ¾-5 ½-6-6 ¾ 617-666-714-763-811 I I II II II 30-60 4 ¼-4 ½-5-6-6 ¾-7 ½ 834-882-926-1014-1102-1213 II 35-80 540 rpm 540 rpm 9 9 For further details on each machinery visit our website accessing by the QR code standard upon request not available 9
ROTARY TILLERS RANGE MODELS WITH SIDE GEAR DRIVE UP TO 130 HP Models B and C are a well-known standard of strength and reliability for rotary tillers. The sturdy structure, the slip clucth PTO shaft and multispeed gearbox make them the perfect match for average power range tractors. Both the machines are available in basic skid version or equipped with rear roller. The C model is particularly versatile, as it can work to a PTO regime both of 540 or 1000 RPM. PTO shaft with slip clutch (standard) For the versions with rear roller is possible to install the broadcast seed drill Compagna : this useful solution allow to reduce the establishment costs and times of grass crops and cereals. 10
B 4 C 6 RANGE FEATURES Model Working width Weight (skid version) Category Tractor power Cardan with slip clutch Cardan with cam clutch Gear transmission Transmission speed Gearbox 6 blades per flange Max work depth Rollers ft lb hp in B B SUPER C 5-6-6 ¾-7 ½ 1197-1355-1512-1642 II 45-100 5-6-6 ¾-7 ½ 1197-1355-1512-1642 II 45-100 6 ¾-7 ½-8-9-10 1587-1715-1827-2039-2072 II 60-130 540 rpm 540 rpm 540-1000 rpm 11 12 11 For further details on each machinery visit our website accessing by the QR code standard upon request not available 11
ROTARY TILLERS RANGE MODELS WITH SIDE GEAR DRIVE UP TO 250 HP SC and G rotary tillers series are the solutions for farmers who are looking for the toughest machines with rigid frame. Both the models guarantee an optimal seedbed refinement from any starting conditions: on tilled land, on direct preparation or with abundant crop residues. Main feature of the SC model is the possibility to choose among 3 rotor options: traditional, Cobra with straight blades or Condor with tine tools. The G rotary tiller is the machine for heavier use, like direct preparation of heavy soil with high power tractors (up to 250 HP). The G model has a built-in oil cooling system that works continuously to keep low temperature in the central gearbox. This means the best reliability on longer working days. An independent hydraulic system powers and sends continuously oil to a cooling fan. Special roller bearings with barrel self-orienting casing are the best solution to have both resistance (+30% compared to tapered bearings) and to be easyin-use. For their installation no pre-load operation is required; their self-aligning capacity is the key for an outstanding reliability in any working condition! Roller bearing G model oil cooling system 12
SC 6 SC COBRA 6 SC CONDOR 6 G 6 RANGE FEATURES Model Working width Weight (skid version) Category Tractor power Cardan with slip clutch Cardan with cam clutch Gear transmission Transmission speed Gearbox Adjustable third point 6 blades per flange Max work depth Rollers ft lb hp SC SC COBRA SC CONDOR G 7 ½-8-9-10 1984-2116-2271-2425 II 90-170 7 ½-8-9-10 2923-3124-3287 II 100-170 7 ½-8-9-10 2835-3036-3199 II 100-170 10-11 ½-13 3219-3545-3871 II-II-III 180-250 540-1000 rpm 540-1000 rpm 540-1000 rpm 1000 rpm 11 10 10 12 in For further details on each machinery visit our website accessing by the QR code standard upon request not available 13
ROTARY TILLERS RANGE HYDRAULIC OFFSET ROTARY TILLERS Side offset models allow to work in comfort during all inter-row operations under and between the plants in vineyards or tree crop plantations. The Maschio range includes 3 models that can satisfy all the requirements of farmers: AZ, Silva and Diana. The AZ and Diana models have an independent automatic hydraulic system with no connection to the tractor, when the spring rod feeler is moved back by a stem or a pole all the rotary tiller slides away from the tree line. No intervention from the driver is required and once the obstacle is overcame the rotary tiller goes back in position. Silva rotary tiller is operated by the driver via tractor hydraulic distributor; the machine has a 4 speed gearbox. 14
AZ 1 OPT in 26 ¼ 14 ½ 30 ⅓ 18 ½ in 30 ¾ 42 ½ 34 ½ 46 ½ SILVA 4 in 31 ½ 15 ¾ 36 ½ 20 ⅔ 41 ⅓ 25 ½ in 31 ½ 47 ¼ 36 ½ 52 41 ⅓ 57 DIANA 1 in 31 ½ 15 ¾ 36 ½ 20 ⅔ 41 ⅓ 25 ½ in 31 ½ 15 ¾ 36 ½ 20 ⅔ 41 ⅓ 25 ½ RANGE FEATURES Model Working width ft Weight lb Category Tractor power hp PTO shaft shearbolt protection Cardan with slip clutch Chain transmission Gear transmission Transmission speed Single speed reducer Gearbox Adjustable third point 4 blades per flange 6 blades per flange Max work depth in Rollers For further details on each machinery visit our website accessing by the QR code standard upon request AZ SILVA DIANA 4 ¾-5 ½ 668-728 I 35-50 5 ¼-6-6 ¾ 1102-1213-1312 II 40-80 5 ¼-6-6 ¾ 1202-1257-1345 II 40-80 540 rpm 540 rpm 540 rpm hyd. auto. hyd. manual hyd. auto 8 9 9 not available 15
ROTARY TILLERS RANGE PUMA FOLDING ROTARY TILLER Puma is the folding rotary tiller with compact transport width (< 8 ft.), great working capacity and extreme agility in all field operations. Cam clutch safety is installed in the 2 side shafts so the two bodies of the machine can work independently in harder soil conditions. Working width range is from 10 ½ to 13 ¾ ft.; a wide choice of rollers completes the offer of a machine designed for professional farmers and contractors. Detail of folding frame with automatic lock in transport. Puma is available with rotor variants Cobra and Condor 16
PUMA 1 RANGE FEATURES Model Working width Weight Category Tractor power Side cam clutch Gear transmission Transmission speed Single speed reducer 6 blades per flange Max work depth Rollers ft lb hp in PUMA PUMA COBRA 10 ½-12-13 ¾ 4034-4233-4806* II 120-240 10 ½-12-13 ¾ 4233-4850-5335* II 120-240 1000 rpm 1000 rpm 11 11 For further details on each machinery visit our website accessing by the QR code standard upon request not available *with cage roller 17
ROTARY TILLERS RANGE PANTERA FOLDING ROTARY TILLER Pantera is Maschio rotary tillers top of the range. It can be matched to most powerful tractors up to 380 HP and larger working width is 20 ft. The structure is so tough that for PANTERA is possible to operate on most compact soils with no previous tillage. Central gearbox is air cooled by an electric fan which is started by a thermostat when is needed. RELIABLE TRANSMISSION The special epicyclic lateral drive with 4 gears matches excellent reliability and strength in a compact design. The stainless steel carter contains lubricating oil and has a structural function for the transmission. 18
1 PANTERA RANGE FEATURES Model PANTERA PANTERA COBRA Working width ft 13 ¾-15 1/4-17 -18 ¾ 13 ¾-15 1/4-17-18 ¾ Weight lb 5732-6173-6834-8157* 5732-6173-6834-8157* Category III III Tractor power hp 200-380 200-380 Side cam clutch Gear transmission Transmission speed 1000 rpm 1000 rpm Single speed reducer 6 blades per flange Max work depth in 12 12 Rollers For further details on each machinery visit our website accessing by the QR code standard upon request not available *with cage roller 19
ROTARY TILLERS RANGE ROLLER CHOICE The rear roller works to reconsolidate the seedbed immediately after the tillage: this guarantees a perfect seed contact with soil moisture and thus a uniform germination. The roller is also the main component to keep an even tillage depth in bigger machines. Maschio offers a wide choice of rear rollers, suitable for the needs of every farmer on many models. Furthermore, all the rotary tillers that can be matched to the roller have the option to be coupled to the Compagna broadcast seed drill, a useful implement to reduce time and cost of cereal, grass and cover crop establishment. Compagna is available in 6 ½ - 8-10 ft versions and has a metering system totally comparable to a standard cereal mechanical drill. Its very sharp angle of seed delivery pipes (78 ) guarantees always an optimal seed distribution in any slope condition. Mechanical roller adjustment Hydraulic roller adjustment Compagna broadcast seed drill 20
CAGE ROLLER (Ø ext. 14 ½ - 17 ¾ in.) It is used on dry loamy soils. It guarantees an excellent refinement of seedbed in standard conditions. The roller height adjustment (pin system, one or two jacks, mechanical or hydraulic) defines the working depth of the machine. PACKER ROLLER (Ø ext. 17 ¾ - 19 ⅔ - 24 in) The packer roller is used particularly for autumn tillage on damp soils. Its special profile breaks up the soil further, and ensures optimum surface compaction for sowing. SPIKE ROLLER (Ø ext. 19 ⅔ - 24 in) It is used mainly after deep plough to leave very soft soil after tillage. It consists in a cylinder fitted with a set of long teeth in S shaped bars, in sets of 4 for each work section, with a pitch of approx 10 in. RICE FIELD (Ø ext. 19 ⅔ in) Similar to spike roller has a larger diameter of the inner cylinder (220 mm) and shorter tines. Has a stronger floating effect comparing to spike roller and is well suited after shallow primary tillage. SPIROPACKER (Ø ext. 19 ⅔ in) This type of roller consists of a bar wound in a spiral around a central axis. It is particularly suitable for light sandy soils. Cage Packer Spiral Spike Rice field U 180-205-230 B 180-205-230 C 205-230-250-280-300 SC 230-250-280-300 SC Cobra 250-280-300 SC Condor 250-280-300 G 300-350-400 Puma 320-370-420-470 Pantera 420-470-520-570-620 in. 14 ½ 17 ¾ 17 ¾ 19 ⅔ 24 19 ⅔ 19 ⅔ 24 19 ⅔ 21
ROTARY TILLERS RANGE A WIDE RANGE OF OPTIONALS TO COMPLETE YOUR NEW MASCHIO ROTARY TILLER! Many optional features can customize the Maschio rotary tiller to any crop or farmer need. Pair of depth wheels. This improves the uniformity in tillage depth for machines with no rear roller. (Available on models A-E-H-U-B-C-SC-Silva-Diana) Tungsten carbide blades. The special material applied on most exposed surface of blades reduces tools wear and increases their lifespan up to 3 times more. These parts are specially recommended for application on most abrasive soils. ASI hitch. This optional can transform the rotary tiller in a real combined machine, the hydraulic system lift the seed drill during transport to keep the centre of mass closer to the tractor. (Available on C-SC-G) Eradicators. The tips loose-up the compaction of soil created by tractor wheels, uniformity of tillage will be improved. (available on H-U-B-C- SC-Puma-Pantera) Side discs. The discs help access of soil and crop residues into the rotor, avoiding any clogging or dragging: the result will be a well levelled seedbed. (Available on H-U-B-C-SC-G-Puma-Pantera) Counterflanges The counterflanges make stronger the connection of the blades to the rotors. This optional is specially recommended on harder soils (available on B-C-SC-Puma-Pantera) 22
SC COBRA Rotor especially studied for very tenacious and dry soil. Perfect soil refinement for excellent preparation of the seed bed. CONDOR AND COBRA ROTORS: THE PREDATORS OF SOIL TILLAGE! For most powerful models like SC, Puma and Pantere special rotor are available (only factory fitted) to operate easily in the most challenging conditions. SC CONDOR Rotor studied for stoney soils. The structure of the blades and the distance between them guarantees uniform soil preparation, allowing a fluid outlet of stones and rock. SC COBRA SC CONDOR SUGARCANE RESIDUE MANAGEMENT Rotary tillers are the traditional implement for soil tillage on dry-land or in paddy field; anyway some model can be very useful in alternative applications like destruction and incorporation of sugarcane crop residues at the end of a plantation cycle. To cope with this extremely abundant and fibrous material is a real challenge that Maschio rotary tillers can deal with no problems! This specific use is very interesting for tropical and sub-tropical countries and is a further demonstration of strength and reliability of Maschio machinery: qualities that every day are next to farmers all over the world! 23
11-14 Cod. W00226409R - Maschio Gaspardo Marketing Department Maschio Gaspardo North America Inc. Headquarters 112 3rd Ave East DeWitt, IA, 52742 - USA Tel. +1 563-659-6400 Fax +1 563-659-6404 www.maschio.us info@maschio.us the winning team DEALER: For graphic reasons, some pictures and images do not show the EC safety guards. Technical datas and models shown in this catalogue are not binding. We reserve the right to revise the contents of this catalogue, to amend or improve the specifications without notice.