Load Securement. Mazzella Lifting Technologies Phone:

Securement Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 796

Securement We stock an entire line of load securement products to secure your loads to your trucks and trailers. We stock binder chains, load binders, ratchet straps and truck tie-down assemblies, along with a complete line of alloy and carbon chain, and fittings. We not only offer a competitive price, but you can also depend on our quality service and selection. If you have a question or need advice, our Lifting Specialists are an excellent source for information. We are the right supplier for you. Contractors Supply Overhead Cranes / Jibs Hoists Services Securement Cordage Wire Rope Lifting Hardware Slings Engineered J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Fall Protection Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 www.kcicraneservice.com 797

Securement Index Midget Binders...799 Ratchet Type Binders...799, 801,....802 Lever Type Binders...800 Binder Without Links & Hooks...800 Ratchet Turnbuckles...803 Cargo Control Binders & s...804 Cargo Control Binder s...805 Transport (Binding) Grade 70...806, 807 High Test Grade 43...806, 808 Hooks...809 Ratchet Buckle Strap Assemblies...810 Truck Tie Down Assemblies...811 Attachment Hardware...812 Warnings Product Warnings...813-815 For the complete catalog index, refer to the front of the book. Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 798

L-130 Midget Binders Forged handle, hooks and swivel link. Steel swivels and clevis. Meets or exceeds requirements of US DOT FMCSA 393 Subpart I. See SEE warning and INFORMATION application information ON PAGES 813 on page - 815.?. Overhead Cranes / Jibs Hoists Slings Engineered Services Model Stock No. Min-Max WLL Ultimate Each Take Up Dimensions () L-130 A B C D E F G W-1 1048100 3/16-1/4 1,450 5,100 2.57 2.40 13.63 16.13 11.00 11.25 6.25 6.56.34 L-140 Standard Ratchet Type Binders Upgraded for use with Grades 70, 80 and 100. Utilizes standard Crosby A-323 Alloy Eye Grab Hooks. New design one piece forged handle. Continuous take-up feature provides finite adjustment to tie down load. One piece assembly, no bolts or nuts to loosen. Ratchet spring is rust proofed. All load bearing or holding parts forged. Easy operating positive ratchet. Meets or exceeds requirements of US DOT FMCSA 393 Subpart I. Model Stock No. Min-Max WLL * Proof Each Handle Barrel Take Up Dimensions () L-140 A B C E E1 F F1 G R-7 ** 1048404 5/16-3/8 8,800 17,600 12.11 14 10 8.0 14.00 1.38 2.75 22.94 30.94 25.13 33.13.50 R-A ** 1048422 3/8-1/2 15,000 30,000 14.70 14 10 8.0 14.00 1.38 2.75 25.25 33.25 27.63 35.63.63 R-C *** 1048440 1/2-5/8 16,000 32,000 14.55 14 10 8.0 14.00 1.38 2.75 26.38 24.38 29.44 37.44.72 * Ultimate is 3 times the Working Limit. ** Matches the Working Limit of Grade 100 chain for both sizes. *** Matches the Working Limit of Grade 100 chain for 1/2" size. Hardware Lifting Wire Rope Cordage Securement Contractors Supply J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 Fall Protection www.kcicraneservice.com 799

L-150 Standard Lever Type Binders Extra heavy construction at leverage point to prevent spreading. Heel of binder toggles away from load, permitting easy release. Ball and socket swivel joints at hook assemblies permit a straight line pull. Meets or exceeds requirements of US DOT FMCSA 393 Subpart I. See SEE warning and INFORMATION application information ON PAGES 813 on page - 815.?. Model Stock No. Std. Pkg. Min-Max WLL * Proof Ultimate Each Handle Take Up Dimensions () L-150 A B C D E F G 7-1 1048128 4 5/16-3/8 5,400 10,800 19,000 7.02 16.00 4.50 24.13 22.13 17.88 16.00 10.38 10.38.50 A-1 1048146 4 3/8-1/2 9,200 18,400 33,000 12.47 18.69 4.50 28.75 25.75 21.25 18.69 12.31 12.38.63 C-1 1048164 4 1/2-5/8 13,000 26,000 46,000 19.68 21.00 4.75 31.25 29.75 25.00 21.00 14.63 13.75.72 * Binders shown with Proof s have been individually proof tested to these values shown, prior to shipment. R-10 Binder without Links & Hooks Meets or exceeds requirements of US DOT FMCSA 393 Subpart I. Model Stock No. WLL * Each Handle Barrel Take Up Dimensions () R-10 A B C E E1 F R-10 1048468 16,000 8.04 14 10 8.0 14.00 1.38 2.75 14.00 22.00 1.00 * Ultimate is 3 times the Working Limit. Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 800

Ratchet Type Binder Heavy-duty, rigid, all-steel construction. Short reach hooks for maximum take-up. Infinite adjustment. Continuous take-up. Meets D.O.T. and C.V.S.A. specifications. SEE INFORMATION Overhead Cranes / Jibs Hoists Max. Working Limit Each Take Up Product Code 3/8 G70 9,200 D48366 12.25 8 1/2 G43 9,200 D48366 12.25 8 Services Binder s 5/16" x 16' GR70 Binder with Clevis Hooks 5/16" x 20' GR70 Binder with Clevis Hooks 3/8" x 16' GR43 Binder with Clevis Hooks 3/8" x 20' GR43 Binder with Clevis Hooks 3/8" x 16' GR70 Binder with Clevis Hooks 3/8" x 20' GR70 Binder with Clevis Hooks Engineered Slings binder operating instructions: 1. Follow D.O.T. Federal Motor Carrier Safety Regulations S 392.9, S 393.100, and S 393.102. 2. Inspect before use. Replace worn and deformed binders. Lubricate pivot and swivel points for optimum performance. 3. Do not operate with anyone on load. 4. Always apply lever binder in a straight line hook-to-hook manner without bending and such that handle goes down when securing load. 5. Tighten binders before moving and re-check frequently. 6. Do not exceed working load limit shown on binder-hand effort will tighten binder to working load limit. 7. Do not use cheater bar or handle extension as their use can overload binder system and result in injury. 8. Secure handle down with a positive retaining method. 9. Release handle / load with extreme care. Make sure everyone is clear. Lever binder handle can snap back over center. Use open palm under handle and push up. : binding systems store energy, which can release suddenly. To avoid injury, operate only by hand from a firm standing position. Operate handle cautiously. Stay clear of handle path: handle may release suddenly. Follow instructions. Clevis Style Welded Style Hardware Lifting Wire Rope Cordage Securement Contractors Supply J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 www.kcicraneservice.com Fall Protection 801

Ratchet Type Binder Uni-Steel, high carbon handle; heavy swedged barrel is cold-drawn tubing instead of welded pipe. Alloy forged heat-treated hooks, electro-welded links and forged eyebolts. Bright gold zinc plated to prevent premature oxidation. One-man operated. Double-action handle has spring-loaded pawl, which assures constant engagement of the pawl in the ratchet wheel. Steel Pawl will always be in the drive or reverse drive operating position at any angle (push-pull). Working Limit clearly identified on each ratchet. SEE INFORMATION LDR-14 DR 1-2-3 LDR-38 No hooks Inside diameter of all eyebolts are 1.1 inch (LDR-7/8 INCH.) Pinpoint setting for tension, permanently locked at all times FORGED EYEBOLTS LDR DR DR JAW & JAW All Acme thread Ratchet turnbucklecontinuous take-up principle Pinpoint setting for tension, permanently locked at all times Jaw bolts and pins are gold zinc-plated FORGED CLEVIS JAWS Product Order Code No. Maximum () G40 G70 Maximum Take Up Screw Diameter Handle Working Limit Maximum Breaking Hook LDR Eyebolts 6 7/8 12-3/4 10,000 30,000 LDR-14 1/4 n/a 4 5/8 8 2,600 7,800 LDR-38 3/8 5/16 6 7/8 12-3/4 5,400 19,800 DR Eyebolts 8 1 15-1/2 13,000 46,000 DR-1 3/8 5/16-3/8 8 1 15-1/2 6,600 26,400 DR-2 1/2 3/8 8 1 15-1/2 9,200 33,000 DR-3 5/8 1/2 8 1 15-1/2 11,500 42,550 DR-J&J Clevis Jaw Bolts 8 1 15-1/2 13,000 46,000 : Not to be used for overhead lifting. Do not exceed working load limit. Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 802

Ratchet Turnbuckles Eminently Adaptable SEE INFORMATION Overhead Cranes / Jibs Patterson manufactures a wide range of customizable ratchet turnbuckles for just about any industrial application. If you need to rig it, brace it, moor it, secure it, or tie it down whatever it is Patterson probably has the ratchet turnbuckle that s right for the job. In fact, they are known for their large inventory and willingness to fill custom orders (even small ones). Patterson either has it on hand or can make it for you fast. That saves you time and money. We start with a smart design. Hoists Services All of Patterson s patented ratchet turnbuckles feature barrels made from cold-drawn steel tubing not from welded pipe. And all of their turnbuckles are equipped with screw stops to decrease the chance of accidental disassembly or loosening. Engineered Design it yourself? Almost. Patterson ratchet turnbuckles are available in a variety of standard sizes and configurations, and they can also design to your specifications. Most of their ratchet turnbuckles feature a spring-activated pawl in the handles, but you can also order gravity pawl handles. Need barrel hex drives? Patterson can do that. Hand-wheel or vise-type handles? They re available, too. And Patterson's turnbuckles are available galvanized for reduced maintenance in saltwater applications. Specs Slings Hardware Lifting You ll be surprised at the variety of standard designs available. Looking for specialized custom models? Patterson will take you there. Wire Rope Standard Ratchet Turnbuckle Custom Ratchet Turnbuckles Mining Ratchet Jack Push Pull Ratchet Cordage Contractors Supply Securement J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 Fall Protection www.kcicraneservice.com 803

Cargo Control Binders & s Laclede offers Tow & Binder chains for basic loads and those super duty loads. Determine the weight of your load and Laclede will help determine the binder you need. SEE INFORMATION High Test G43 Tow & Binder s Clevis Type WLL ft. 14 5/16 3,900 3/8 Pieces Drum Drum 25 387 1473-514-00 16 25 438 1421-830-00 20 20 425 1421-812-58 25 20 527 1421-826-56 16 25 643 1424-863-60 20 5,400 20 635 1424-865-60 25 15 589 1424-826-56 High Test G43 Tow & Binder s Eye Type WLL ft. 14 5/16 3,900 3/8 Pieces Drum Drum 25 385 1421-822-58 16 25 435 1421-824-55 20 20 426 1421-812-57 25 20 526 1421-826-55 16 25 635 1424-863-56 20 5,400 20 630 1424-865-58 25 15 585 1424-827-55 Binders Lever Rating ( / Grade) Working Limit Package Quantity Unit Finish 1/4 1/4 G70 3,150 1 4 Red 8592-104-14 5/16 * 5/16 G7-3/8 G4 * 5,400 1 10 DK Red 8592-006-80 * 5/16 5/16 G7-3/8 G4 6,600 1 11 Red 8592-106-14 5/16 * 5/16 G7-3/8 G7 9,200 1 13 DK Red 8592-107-80 3/8 3/8 G7-1/2 G4 13,000 1 16 Red 8592-108-14 * Recoilless * Recoilless Binders Ratchet Rating ( / Grade) Working Limit Package Quantity Unit Finish 1/4 1/4 G70 3,150 1 4 Red 8592-234-14 5/16 5/16 G7-3/8 G4 5,400 1 10 Red 8592-236-14 5/16 5/16 G7-3/8 G7 6,600 1 11 DK Red 8592-237-80 3/8 3/8 G7-1/2 G4 9,200 1 13 Red 8592-238-14 1/2 1/2 G7-5/8 G4 13,000 1 16 Red 8592-240-14 G80 Binders - Ratchet Rating ( / Grade) Working Limit Package Quantity Unit Finish 5/16 5/16 G8-3/8 G8 7,100 1 11 Green 8592-236-14 3/8 3/8 G8-1/2 G8 12,000 1 12 Green 8592-238-14 1/2 1/2 G8-5/8 G8 18,100 1 19 Green 8592-840-14 Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 804

Cargo Control Binder s Laclede offers tow and binder chains for basic loads and those super-duty loads. Determine the weight of your load and Laclede will help determine the binder you need. Alloy G80 Tow & Binder s Clevis Type SEE INFORMATION Overhead Cranes / Jibs Hoists Working Limit Unit ft. 5/16 20 4,500 23 1022-530-01 3/8 16 27 1024-416-01 7,100 20 33 1024-520-01 1/2 16 47 1031-516-01 12,000 20 57 1031-522-01 5/8 20 18,100 81 1037-520-01 Services Engineered Transport G70 Tow & Binder s Clevis Type Working Limit Pieces Drum Unit Slings Hardware Lifting Wire Rope Cordage Contractors Supply ft. 14 25 390 3521-622-56 5/16 16 25 440 3521-623-56 4,700 20 25 538 3562-320-05 25 20 535 3521-626-57 16 25 635 3524-626-56 3/8 20 6,600 20 630 3583-520-15 25 15 590 3582-825-05 1/2 16 10 477 3532-823-55 11,300 20 10 583 3532-725-55 Transport G70 Tow & Binder s Eye Type Working Limit Pieces Drum Unit ft. 10 30 317 3565-310-05 5/16 16 4,700 25 407 3565-316-05 20 25 504 3565-320-05 10 40 594 3568-310-05 3/8 16 6,800 25 572 3586-316-05 20 20 564 3568-320-05 Securement J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 Fall Protection www.kcicraneservice.com 805

Transport Grade 70 & High Test Grade 43 s SEE INFORMATION Quick-ship from stock! Grade 70 Transport (Binding) embossed: G70 (gold finish) and trace code. Grade 43 High Test embossed: G43 and date code; available in bright finish and hot galvanized. Working Nominal Inside Link Limit Dimension (inches) 100 Ft. inches decimals Width 1/4.281 3,150.84.47 74 5/16.327 4,700.98.46 100 3/8.406 6,600 1.14.54 156 7/16.468 8,750 1.33.62 204 1/2.531 11,300 1.43.72 259 1/4.281 2,600 1.00.47 71 5/16.327 3,900 1.10.50 98 3/8.390 5,400 1.23.62 144 7/16.468 7,200 1.37.75 210 1/2.531 9,200 1.50.81 278 5/8.656 13,000 1.87 1.00 422 3/4.781 20,200 2.12 1.12 606 7/8.875 24,500 2.25 1.14 776 1 1 34,100 2.75 1.50 1,050 Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 806

Transport Grade 70 Electronically welded and heat treated Higher strength to weld ratio Easily recognized Gold Chromate Finish SEE INFORMATION Overhead Cranes / Jibs G70 Specifications Hoists WLL 100 Ft. Material Dia. Inside Inside Width 1/4 3,150 59.267 1.24.46 5/16 4,700 83.319 1.15.49 3/8 6,600 131.378 1.30.60 7/16 8,750 209.458 1.37.67 1/2 11,300 240.496 1.56.81 5/8 15,800 341.608 1.93.92 Services Engineered Drums 1/4 5/16 3/8 7/16 1/2 5/8 Round Pails Feet Drum Drum 800 482 3519-643-55 400 241 3519-644-55 550 522 3523-543-55 275 261 3523-544-55 400 534 3526-543-55 200 267 3526-544-55 300 637 3528-543-55 150 319 3528-544-55 200 490 3533-543-35 100 245 3533-544-35 150 522 3546-543-35 75 261 3546-544-35 Feet Pail Pail 1/4 135 81 3519-603-55 5/16 90 85 3519-503-55 3/8 63 84 3523-503-55 1/2 37 90 3523-501-55 Square Pails Feet Pail Pail 1/4 90 54 3519-601-35 5/16 65 61 3519-501-35 3/8 45 60 3523-501-35 G70 Clevis Grab Hook G70 Clevis Grab Hook Pieces Pieces G70 Clevis Slip Hook With Latch G70 Clevis Slip Hooks with Latch With Latch 1/4 10 5 3570-025-05 n/a 5/16 10 8 3570-035-05 3570-325-05 3/8 10 14 3570-045-05 3570-425-05 1/2 10 32 3570-065-05 3570-625-05 5/8 10 57 3570-071-05 3570-730-05 1/4 10 5 3570-025-05 5/16 10 8 3570-035-05 3/8 10 14 3570-045-05 1/2 10 32 3570-065-05 5/8 10 57 3570-071-05 5/8 150 522 3546-543-35 Slings Hardware Lifting Wire Rope Cordage Securement Contractors Supply J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 www.kcicraneservice.com Fall Protection 807

High Test Grade 43 Low carbon steel chain ideal for most tie down applications Electronically welded and proof tested Available as self-colored, electro-galvanized or hot galvanized finishes G43 Specifications WLL 100 Ft. Material Dia. Inside Inside Width 1/4 2,600 65.267 1.02.50 5/16 3,900 93.319 1.15.49 3/8 5,400 136.385 1.30.60 1/2 9,200 264.52 1.56.81 5/8 13,000 393.63 1.87 1 SEE INFORMATION Drums 1/4 5/16 3/8 1/2 5/8 Feet Drum Round Pails Square Pails Drum Self Colored Electro- Galv. Hot Galv. 800 530 1419-543-00 1419-543-04 1419-543-06 400 265 1419-544-00 1419-544-04 1419-544-06 550 524 1423-543-00 1423-543-04 1423-543-06 275 262 1423-544-00 1423-544-04 1423-544-06 400 554 1426-543-00 1426-543-04 1426-543-06 200 277 1426-544-00 1426-544-04 1426-544-06 200 538 1433-543-00 1433-543-04 1433-543-06 100 269 1433-544-00 1433-544-04 1433-544-06 150 600 1439-543-00 1439-543-04 1439-543-06 75 300 1439-544-00 1439-544-04 1439-544-06 Feet Pail Pail Self Colored Electro- Galv. Hot Galv. 1/4 135 91 1419-503-00 1419-503-04 1419-503-06 5/16 90 87 1423-503-00 1423-503-04 1423-503-06 3/8 63 88 1433-503-00 1433-503-04 1433-503-06 1/2 37 101 1433-501-00 1433-501-04 1433-501-06 Feet Pail Pail Self Colored Electro- Galv. 1/4 90 61 1419-403-00 1419-403-04 5/16 65 63 1423-403-00 1423-403-04 3/8 45 64 1426-403-00 1426-403-04 1/2 25 68 1433-504-00 n/a G43 Clevis Grab Hook Reels G43 Clevis Grab Hook G43 Clevis Slip Hooks with Latch Feet Reel Pieces Pieces G43 Clevis Slip Hook With Latch Reel Reel Width Self Colored Electro- Galv. 1/4 135 52 12-1/8" 1419-522-00 1419-522-04 5/16 90 68 12-1/8" 1423-532-00 1423-532-04 3/8 63 71 12-1/8" 1426-521-00 1426-521-04 Electro- Galv. 1/4 10 4 6470-205-04 5/16 10 7 6470-305-04 3/8 10 10 6470-405-04 1/2 10 21 6470-605-04 Electro- Galv. 1/4 10 5 6495-205-04 5/16 10 8 6495-305-04 3/8 10 13 6495-405-04 1/2 10 29 6495-605-04 Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 808

Hooks Grade 100 Clevis Grab Hook Not for overhead lifting SEE INFORMATION Overhead Cranes / Jibs WLL Pieces 1/4 4,300 1.66 1397-201-00 5/16 5,700 1 1.10 1397-301-00 3/8 8,800 1 1.94 1397-401-00 1/2 15,000 1 3.08 1397-601-00 5/8 22,600 1 6.08 1397-701-00 Grade 43 Eye Grab Hook Hoists Services Grade 80 Clevis Grab Hook Not for overhead lifting WLL Pieces 1/4 3,500 1.5 1097-201-80 5/16 4,500 1.7 1097-301-80 3/8 7,100 1 1.2 1097-401-80 1/2 12,000 1 2.4 1097-601-80 5/8 18,100 1 4.8 1097-701-80 Grade 70 Clevis Slip Hook with Latch WLL Pieces 1/4 3,150 10 5 3570-025-05 5/16 4,700 10 8 3570-035-05 3/8 6,600 10 14 3570-045-05 1/2 11,300 5 32 3570-065-05 5/8 15,800 bulk n/a 3570-071-05 Grade 70 Clevis Grab Hook WLL Pieces With Latch 1/4 3,150 10 5 3570-205-05 n/a 5/16 4,700 10 8 3570-305-05 3570-325-05 3/8 6,600 10 10 3570-405-05 3570-425-05 1/2 11,300 5 12 3570-603-05 3570-625-05 5/8 15,800 bulk n/a 3570-701-05 3570-730-05 Grade 43 Clevis Grab Hook WLL Pieces Grade 43 Clevis Slip Hook Self Colored Electro- Galv. 1/4 2,600 10 4 6470-205-00 6470-205-04 5/16 3,900 10 7 6470-305-00 6470-305-04 3/8 5,400 10 10 6470-405-00 6470-405-04 1/2 9,200 10 21 6470-605-00 6470-605-04 WLL WLL Pieces Pieces Self Colored Self Colored Electro- Galv. Electro- Galv. 1/4 2,600 10 3 6460-205-00 6460-205-04 5/16 3,900 10 5 6460-305-00 6460-305-04 3/8 5,400 10 8 6460-405-00 6460-405-04 1/2 9,200 10 20 6460-605-00 6460-605-04 With Latch 1/4 2,600 10 5 6490-205-00 6490-205-04 6495-205-04 5/16 3,900 10 8 6490-305-00 6490-305-04 6495-305-04 3/8 5,400 10 13 6490-405-00 6490-405-04 6495-405-04 1/2 9,200 10 29 6490-605-00 6490-605-04 6495-605-04 Engineered Slings Hardware Lifting Wire Rope Cordage Securement Contractors Supply J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 www.kcicraneservice.com Fall Protection 809

Ratchet Strap Assemblies All heavy duty 2" cargo strap assemblies are made from premium, yellow, 12,000 lb. tensile strength tested, polyester webbing for maximum durability. Meets all the requirements of the U.S. Department of Transportation (DOT), Canadian Council of Motor Transport Administrators (CCMTA) and Commercial Vehicle Safety Alliance (CVSA). 2" inline strap assemblies come standard with a 12" fixed end. SEE INFORMATION Standard Handle Ratchet with Flat Hooks Wide Handle Ratchet with Flat Hooks Standard Handle Ratchet with J-Hooks Wide Handle Ratchet with D-Rings Standard Handle Ratchet with Grab Hooks Standard Handle Ratchet with Flat Snap Hooks Wide Handle Ratchet with & Hook Wide Handle Ratchet with J-Hooks Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 810

Truck Tie Down Assemblies Secure cargo on trucks and trailers. SEE INFORMATION Choice of Four End Treatments Overhead Cranes / Jibs With a soft, pliable and non-abrasive polyester webbing, our Truck Tie Down Assemblies are ideal straps for securing cargo on flatbed trucks and trailers. They re lighter and easier to handle than chain load binders, and stronger and more durable than elastic tension bands. They also adjust easily in length to fit the size of load you re hauling. The polyester webbing offers many advantages: Hoists Services Fabricated to meet your specific order. Fits standard 3" and 4" winches. Low-stretch design (approximately 3% at Working Limit) for improved handling. High-strength design isn t affected by moisture. All cut ends are heat-sealed to prevent fraying. Corner protectors and sliding sleeves also available. D-Ring 4,000 WLL; 12,000 nominal strength * Flat Hook 4,000 WLL; 12,000 nominal strength * Engineered Slings Other options: 1. Sliding winches designed to slide along the winch track are available. Please specify manufacturer of winch track when ordering. 2. Other winches and winch tracks are available. 3. You may also order sliding sleeve type wear pads and metal corner protectors (ask for details). Two Types of Winches Anchor Assembly 4,000 WLL; 12,000 nominal strength * Sewn Eye 4,000 WLL; 12,000 nominal strength * Hardware Lifting Portable winch provides flexibility of mounting position without need for winch track. Simply mount on side channel. Available with or without locking screws. Mandrel slotted for pull-through 3" and 4" webbing. Fixed winch is designed for fixed mounting for use with loose end (pull-through) straps. Rugged 3/8" steel frame, 5/8" ratchet and pawl, hardened steel pawl pin, 4" slotted mandrel. Dimensions: 8-1/8" long, 5-1/2" high, 3-1/2" wide. Models available to store 30' of webbing. * Caution: Do not subject these assemblies to loads greater than the Working Limits because permanent loss of strength may result. These cargo straps have a design factor of 3 calculated into the Working Limit. Wire Rope Cordage Securement Contractors Supply J Henry Holland Phone: 757-460-3300 www.jhenryholland.com Alabama Sling Center Phone: 205-744-0230 www.alabamaslingcenter.com Tennessee Sling Center Phone: 901-345-8918 (Memphis) Phone: 423-634-9005 (Chattanooga) www.tennesseeslingcenter.com KCI Crane Service Phone: 205-345-4701 www.kcicraneservice.com Fall Protection 811

Attachment Hardware 2" Narrow Hook No. 40024-12 Breaking Strength: 2,500 / 1,136 kg. Working Limit: 833 / 378 kg. Code 11 :.10 lb. /.05 kg. 2" Narrow Hook No. 43120-11 Breaking Strength: 5,000 / 2,272 kg. Working Limit: 1,666 / 757 kg. Code 2L :.39 /.18 kg. 2" Narrow Hook No. 43120-13 Breaking Strength: 10,000 / 4,545 kg. Working Limit: 3,333 / 1,575 kg. Code 5L :.62 /.28 kg. 3" Narrow Hook No. 43120-20 Breaking Strength: 22,000 / 10,000 kg. Working Limit: 7,333 / 3,333 kg. Code CF : 1.39 /.63 kg. 2" Wide Hook No. 40023-13 Breaking Strength: 2,500 / 1,136 kg. Working Limit: 833 / 378 kg. Code 10 :.12 /.06 kg. 3" Flat Hook No. 41766-18 Breaking Strength: 15,000 / 6,818 kg. Working Limit: 5,000 / 2,272 kg. Code CP :.98 /.45 kg. 3" Flat Hook with Keeper No. 41766-12 Breaking Strength: 15,000 / 6,818 kg. Working Limit: 5,000 / 2,272 kg. Code 3D : 1.20 /.55 kg. 2" Flat Hook No. 43099-10 Breaking Strength: 5,000 / 2,272 kg. Working Limit: 1,666 / 757 kg. Code 7C :.4 /.18 kg. 2" Flat Hook No. 41519-10 Breaking Strength: 10,000 / 4,545 kg. Working Limit: 3,333 / 1,575 kg. Code 5C : 1.14 /.52 kg. 2" Flat Hook No. 40891-18 Breaking Strength: 10,000 / 4,545 kg. Working Limit: 3,333 / 1,575 kg. Code 02 :.68 /.31 kg. 2" Snap Hook No. 44887-12 Breaking Strength: 5,000 / 2,272 kg. Working Limit: 1,666 / 757 kg. Code 5A :.20 lb. /.09 kg. 2" Snap Hook No. 40084-14 Breaking Strength: 6,300 / 2,863 kg. Working Limit: 2,100 / 954 kg. Code O1 :.34 lb. /.15 kg. 2" Snap Hook with Satin Black Finish No. 40758-11 Twisted Version Breaking Strength: 10,000 / 4,545 kg. Working Limit: 3,333 / 1,115 kg. Code 9D :.59 lb. /.27 kg. 2" Snap Hook with Black Satin Finish No. 40758-13 Breaking Strength: 10,000 / 4,545 kg. Working Limit: 3,333 / 1,515 kg. Code 1E :.59 lb. /.27 kg. 2" Delta Ring No. 40978-11 Breaking Strength: 10,000 / 4,545 kg. Working Limit: 3,333 / 1,115 kg. Code 4O :.28 lb. /.13 kg. 3" Delta Ring No. 40758-13 Breaking Strength: 18,000 / 8,181 kg. Working Limit: 6,000 / 2,727 kg. Code CJ : 1.05 lb. /.48 kg. Anchor with Pear Shaped Ring, Unpainted No. 43366-12 Breaking Strength: 16,200 / 7,363 kg. Working Limit: 5,400 / 2,454 kg. Code CG : 3.30 / 1.50 kg. Anchor with Delta Ring, Plated No. 43366-14 Breaking Strength: 16,200 /7,363 kg. Working Limit: 5,400 / 2,454 kg. Code CH : 3.40 / 1.55 kg. Grab Hook Assembly, Unpainted No. 43365-12 Breaking Strength: 16,200 / 7,363 kg. Working Limit: 5,400 / 2,454 kg. Code CG : 1.60 lb. /.73 kg. Clevis Hook No. 45946-10 (5/16") / 45946-11 (3/8") Breaking Strength: 18,800 / 8,545 kg. (5/16") Breaking Strength: 26,400 / 12,000 kg. (3/8") Working Limit: 6,266 / 2,848 kg. (5/16") Working Limit: 8,800 / 4,000 kg. (3/8") :.85 lb. /.39 kg. (5/16") / : 1.10 lb. /.50 kg. (3/8") Mazzella Lifting Technologies Phone: 800-362-4601 www.mazzellalifting.com Progressive Crane Phone: 800-83-CRANE www.progressivecrane.com Mazzella Crane Service Phone: 877-96-CRANE www.mazzellacraneservice.com Indusco Wire Rope & Supplies Phone: 410-727-0665 www.induscowire.com 812

Securement Product Warnings 813

Securement General Warnings IMPORTANT please read! Definitions of basic terms used throughout this section: Breaking strength capacity maximum load a component or assembly will withstand before failure, measured in pounds (lbs). A chain is only as strong as its weakest link. In any given assembly, the component with the lowest breaking strength capacity will probably fail first. For example, a standard web binder assembly with a breaking strength capacity of 12,000 anchored to a device with a breaking strength capacity of 5,000 will fail at 5,000 It is important that tie downs be attached to components that are of sufficient strength to properly secure the load. We can help you determine the right components to optimize your assembly performance. Working load capacity as the name implies, this refers to the maximum working load a component or assembly should be subjected to during use. For your safety, working load capacity equivalent to no more than one-third (1/3) the breaking strength capacity of the component or assembly. Rated load capacity these are industry or legislative standards and may vary from industry to industry or state to state, respectively. For example, the 1987 California Highway Patrol rating for flatbed tie downs is established at 70% of the breaking strength capacity of web binders, or 80% of the breaking strength capacity or force required to cause permanent distortion of component hardware, whichever is less. It is the owner s and user s responsibility to determine suitability of a product for any particular use. Check all applicable industry, trade association, federal, state and local regulations. Read all operating instructions and warnings carefully. are subject to age, wear and deterioration, which may cause a reduction in their breaking strength capacity. We recommend that all products be regularly inspected and any worn, deformed, misused or overloaded products should be replaced immediately. Mazzella believes it is the individual responsibility of the purchaser and those subsequently given the product to use to assess their particular need and select the appropriate product for their application. Warranties Seller warrants that its goods are free from defects in materials and workmanship. Accordingly, Seller s liability is limited to replacing without charge or refunding the purchase price, or making fair allowance for any noncompliance with any specifications or any defects in materials or workmanship in its products existing at the time of delivery. Seller requires written notice and the return of the product to establish any claim. Seller makes no other warranty of any kind whatsoever, express or implied, and all implied warranties of merchantability or fitness for a particular purpose which exceed the above obligation are hereby disclaimed by seller and excluded. Seller will not be liable for any consequential damages, loss, or expense arising in connection with the use or inability whatsoever, regardless of weather damage, loss, or expense results from any act or failure to act by Seller, whether negligent or willful, or for any other reason. Do not use for overhead lifting. Do not use if strap webbing is cut. Webbing must be protected from edges. All hardware must be in line with direction of pull for rated capacity. Use binder in accordance with federal (DOT title 49) and State (CA title 13) regulations. Inspection assemblies must be inspected for worn or damaged parts. Failure to replace worn or damaged assemblies or components may result in serious personal injury if failure occurs. All ratings shown in this section are based on the product being new, and used in normal environmental conditions. Special care should be taken under extreme or unusual working conditions. icular caution should always be exercised to avoid exposing webbing products to sharp or abrasive edges or acids. 814

Binders Warnings Laclede Warnings L-130 Midget L-150 Standard Lever Type This chain is not to be used for overhead lifting. Never exceed the Working Limit. For complete warning and application information, see Laclede Manufacturing Company, LLC. at www.lacledechacom L-140 Standard Ratchet Type R-10 Without Links & Hooks Failure to use this load binder properly may result in serious injury or even death to you or others. Do not operate load binder while standing on the load. Move handle with caution. It may whip Keep body clear. Keep yourself out of the path of the moving handle and any loose chain laying on the handle. You must be familiar with state and federal regulations regarding size and number of chain systems required for securing loads on trucks. Always consider the safety of nearby workers as well as yourself when using load binder. While under tension, load binder must not bear against an object, as this will cause side load. Do not throw these instructions away. Keep them close at hand and share them with any others who use this load binder. Do not use handle extender see instructions. Do not attempt to close or open the binder with more than one person. For complete warning and application information, see The Crosby Group at www.thecrosbygroup.com 815