Exceeds Industry Specifications Engeered Canada Proof Tested TITANMARINEPRODUCTS.COM CANADA METAL (PACIFIC) LTD
01 Table of Contents Table of Contents 01 ISO High Test Wdlass Cha G43 02 DIN766 Wdlass Cha G30 03 BBB Wdlass Cha G30 04 Grade L Wdlass Cha G30 05 ISO Proof Coil Cha G30 General Purpose / Anchor Cha 06 Moorg Cha Long Lk G43 07 Premium Staless Steel Cha D766 08 Premium Staless Steel Cha 4565 09 Anchor Rode 10 Double Braided Anchor Rode 11 Eight Strand Plaited Anchor Rode 11 Three Strand Anchor Rode 12 Dock Le 13 Fender Le 14 Hot Dip Galvanized Shackles 15 High Strength Hot Dip Galvanized Shackles 16 Sterndrive Installation Jack & Accessories 17 Self-Rightg Anchor Swivels 18 Cha Packagg Options and Merchandisg Solutions 19 *The descriptions and guideles shown this literature should be used as a general reference only. For any further technical formation please contact our Technical Service. Contents of this Brochure/Catalog are based on the latest formation available at the time of publication. CMP / Titan assumes no responsibility for the accuracy of the formation contaed here. Product specifications are subject to change without notice.
02 ISO High Test Wdlass Cha G43 Please see Page 19 for Packagg Details G43 Embossed/ft TRADE WIRE DIAMETER INSIDE DIMENSIONS WIDTH WORKING LOAD LIMIT kg-force poundforce 1/4 7 0.276 21.3 0.84 10.41 0.41 1179 2600 5/16 8.4 0.329 26.2 1.03 12.95 0.51 1769 3900 3/8 10 0.394 31 1.22 15 0.59 2449 5400 7/16 11.8 0.464 35.6 1.40 16.5 0.65 3266 7200 1/2 13.0 0.519 40.34 1.59 19.3 0.76 4173 9200 TRADE HALF DRUM FINISH: Hot Dip Galvanized PACKAGING: Full and Half Drums Exceeds NACM, RR-C-271D specifications ISO High Test Cha uses high tensile strength carbon steel that provides a greater strength-to-weight ratio than proof coil cha. ISO short pitch lks make it more flexible and ideally suited as a wdlass cha. Each lk is proof tested and calibrated. Check manufacturer s specification prior to purchase. FULL DRUM WEIGHT WEIGHT kg lb m ft kg lb m ft 1/4 136 300 121.9 400 10312746 272 600 243.8 800 10313043 5/16 134 296 83.82 275 10312747 268 591 167.6 550 10313044 5/16 146 322 91.44 300 10312728 - - - - - 3/8 138 304 60.96 200 10312748 276 608 121.9 400 10313047 7/16 - - - - - 281 620 91.44 300 10313048 1/2 - - - - - 232 512 60.96 200 10313049 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
03 DIN 766 Wdlass Cha G30 Please see Page 19 for Packagg Details D766 Embossed/ft DIN766 cha uses a low carbon steel cha specifically designed for anchorg applications. Hot dip galvanized short lk cha, calibrated to latest DIN766 standard. Each lk is calibrated to ensure proper fit for most metric wdlasses. Check manufacturer s specification prior to purchase. TRADE WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH kg-force pound-force 6 6.24 18.5.73 7.2.28 408 900 7 7.28 22.87 8.4.33 635 1400 8 8.31 24.94 9.6.38 816 1800 10 P28 10.39 28 1.1 12.47 1275 2810 10 P30 10.39 30 1.2 12.47 1275 2810 11 11.43 31 1.22 13.2.52 1610 3550 13 13.51 36 1.4 15.6.61 2041 4500 14 14.55 41 1.6 16.8.66 2551 5625 16 16.63 45 1.77 19.2.76 3186 7025 TRADE FINISH: Hot Dip Galvanized PACKAGING: Full Drums Exceeds NACM, RR-C-271D specifications FULL DRUM kg lb / m / ft 6 10315921 252 554 315 1033.46 7 10315922 250 549 225 738.2 8 10315923 249 547 175 574.15 10 P28 10315915 257 566 110 360.89 10 P30 10315916 260 573 110 360.89 11 10315917 249 548 88 288.71 13 10315918 247 544 62 203.41 14 10315919 250 549 57 187 16 10315920 252 554 44 144.36 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
04 BBB Wdlass Cha G30 Please see Page 19 for Packagg Details BBB Embossed/ft BBB is a low carbon steel cha designed with short, compact calibrated lks suitable for wdlasses and general anchorg. Check manufacturer s specification prior to purchase. TRADE WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH kg-force pound-force 1/4 7.1 0.281 22.1 0.87 10.92 0.43 590 1300 5/16 8.7 0.344 25.4 1.00 12.7 0.50 862 1900 3/8 10.3 0.406 27.69 1.09 15.75 0.62 1202 2650 TRADE WEIGHT FINISH: Hot Dip Galvanized PACKAGING: Full Drums Exceeds NACM, RR-C-271D specifications FULL DRUM kg lb m ft 1/4 10315911 261 576 243.84 800 5/16 10315912 274 605 167.64 550 3/8 10315913 283 624 121.92 400 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
05 Grade L Wdlass Cha G30 Please see Page 19 for Packagg Details L Embossed/ft Grade L is a low carbon steel cha specifically manufactured to Australian Standard AS2321-2006. Used for anchorg and moorg applications, Grade L calibrated short-lk design ensures proper fit for most Australian wdlasses. Check manufacturer s specification prior to purchase. TRADE TRADE WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH FINISH: Hot Dip Galvanized PACKAGING: Full & Half Drums, Pails Exceeds NACM, RR-C-271D specifications kg-force PLASTIC PAIL HALF DRUM FULL DRUM WEIGHT WEIGHT WEIGHT kg lb m ft kg lb m ft kg lb m ft pound-force 6 6.24 18.71 7.5.3 454 1000 8 8.31 24.94 10.39 816 1800 10 10.39 30 1.2 12.5.49 1270 2800 13 13.51 39 1.5 16.3.64 2041 4500 6 48 106 60 196.9 10315930 126 276 157 515 10315928 252 554 315 1033.5 10315929 8 48 106 34 111.6 10315766 125 275 88 288.7 10315932 249 547 175 574.1 10315931 10 50 110 22 72.2 10315756 125 276 55 180.4 10315925 251 552 110 361 10315924 13 50 110 13 42.7 10315759 124 272 32 105 10315926 247 543 64 210 10315927 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
06 ISO Proof Coil Cha G30 General Purpose/Anchor Cha Please see Page 19 for Packagg Details G30 Embossed/ft ISO Proof Coil Cha is low carbon steel general purpose/anchor cha with an ISO short pitch lk. It is used applications where high tensile strength is not required. TRADE IN TRADE IN FINISH: Hot Dip Galvanized PACKAGING: Full&Half Drums, Pails Exceeds NACM, RR-C-271D specifications WIRE DIAMETER INSIDE DIMENSIONS WORKING LOAD LIMIT WIDTH kg-force PLASTIC PAIL HALF DRUM FULL DRUM WEIGHT WEIGHT WEIGHT kg lb m ft kg lb m ft kg lb m ft pound-force 3/16 5.5 0.218 24.64 0.97 10.16 0.4 363 800 1/4 7 0.276 25.4 1.00 12.7 0.5 590 1300 5/16 8.4 0.329 28.45 1.12 12.7 0.5 862 1900 3/8 10 0.394 31.24 1.23 15.75 0.62 1202 2650 1/2 13 0.519 38.1 1.50 20.57 0.81 2041 4500 5/8 16 0.630 48.26 1.90 25.65 1.01 3130 6900 3/4 20 0.781 55.88 2.20 27.69 1.09 4808 10600 3/16 47 102 76.2 250 10312737 148 327 243.84 800 10312727 297 654 487.68 1600 10313036 1/4 46 101 42.98 141 10312738 130 287 121.92 400 10312742 260 574 243.84 800 10313037 5/16 43 95 28.04 92 10312739 129 284 83.82 275 10312743 258 568 167.64 550 10313038 3/8 44 96 19.2 63 10312740 138 305 60.96 200 10312744 277 611 121.92 400 10313039 1/2 44 96 10.97 36 10312741 121 266 30.48 100 10312745 241 531 60.96 200 10313040 5/8 - - - - - - - - - - 264 582 45.72 150 10313041 3/4 - - - - - - - - - - 261 576 30.48 100 10313042 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
07 Moorg Cha Long Lk G43 G43 Embossed/ft FINISH: Hot Dip Galvanized PACKAGING: Full Drums Exceeds NACM, RR-C-271D specifications Please see Page 19 for Packagg Details High tensile strength moorg cha with long lks that allows the use of shackles. TRADE WIRE DIAMETER INSIDE DIMENSIONS WIDTH WORKING LOAD LIMIT kg-force pound-force 3/8 9.8 0.386 41.9 1.65 16.5 0.65 1837 4050 1/2 13.0 0.512 50 1.97 22.1 0.87 3130 6900 5/8 16.7 0.656 64.26 2.53 23.37 0.92 4423 9750 3/4 19.8 0.781 75.95 2.99 26.42 1.04 6804 15000 TRADE WEIGHT FULL DRUM kg lb m ft 3/8 10312729 123 271 60.96 200 1/2 10312730 214 472 60.96 200 5/8 10312731 260 573 45.72 150 3/4 10312732 239 527 30.48 100 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
08 Premium Staless Steel Cha Please see Page 19 for Packagg Details D766 Embossed/ft TRADE INSIDE / WIDTH BREAKING STRENGTH kn WORKING LOAD LMT kn WEIGHT kg/lb FINISH: Polished Staless Steel PACKAGING: Full&Half Drums, Pails DIN 766 WINDLASS specification DIN 766 Wdlass Staless Steel Cha G60. AISI 316L Staless Steel Cha is designed to offer superior corrosion resistance, appearance and strength. Made Germany, each lk is precisely calibrated to meet current DIN 766 wdlass specifications, and manufactured with an extra treatment to provide exceptionally smooth and clean surfaces. Please check manufacturer s specification prior to use. PAIL HALF DRUM FULL DRUM m/ft WEIGHT kg/lb m/ft WEIGHT kg/lb 10321050 6 18.5/7.2 30 7.5 24/53 35/115 - - - - 10321051 6 18.5 7.2 30 7.5 35/77 50/164 - - - - 10319630 6 18.5 7.2 30 7.5 - - 69/152 100/328 - - 10321060 8 24/9.6 50 12.5 44/97 35/115 - - - - 10321061 8 24/9.6 50 12.5-62/137 50/164 - - 10319631 8 24/9.6 50 12.5 - - - - 124/273 100/328 10321071 10 28/12 80 20 - - 44/97 35/115 - - 10321070 10 28/12 80 20 72/159 35/115 - - - - 10319632 10 28/12 80 20 - - - - 206/454 100/328 m/ft Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
09 Premium Staless Steel Cha Please see Page 19 for Packagg Details 4565 Embossed/ft FINISH: Polished Staless Steel PACKAGING: Full&Half Drums ISO 4565 WINDLASS specification ISO 4565 Wdlass Staless Steel Cha G60 316L. AISI 316L Staless Steel Cha is designed to offer superior corrosion resistance, appearance and strength. Made Germany, each lk is precisely calibrated to meet current ISO 4565 wdlass specifications, and manufactured with an extra treatment to provide exceptionally smooth and clean surfaces. Please check manufacturer s specification prior to use. TRADE INSIDE INSIDE WIDTH BREAKING STRENGTH kn WORKING LOAD LIMIT kn HALF DRUM WEIGHT kg/lb m/ft WEIGHT kg/lb FULL DRUM m/ft 10325030 12 36 16.2 118 29.5 - - 320/704 100/328 10325031 12 36 16.2 118 29.5 - - 160/352 50/164 10325032 12 36 16.2 118 29.5 80/176 25/82 - - 10325055 12 36 16.2 118 29.5 112/246 35/115 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
10 Anchor Rode What is the difference between twisted and braided anchor rope? When buyg anchor rope, you are likely to encounter two types of nylon rope: twisted and braided. All nylon rope makes an excellent choice for anchor rope and the difference between braided rope and twisted rope really comes down to stiffness and whether you need to splice the rope or not. Dependg on the size and type of your boat, your choices are an all-rope anchor rode, combation rope/cha, or all cha. Rope should be nylon, either three-strand or braided. Nylon rope is elastic, makg it a great shock absorber for sudden loads caused by wd and waves. Three-strand le should be medium lay, which has more twists per foot than soft lay. This is particularly important for use with a wdlass, as the soft lay strands can untwist and separate, foulg the equipment. Three-strand rope can become awkward to handle, especially when hardened by salt saturation. An occasional bath fabric softener will help to keep it supple. Cha, used alone or combation with rope, offers great benefits: it decreases the angle of pull on the anchor allowg it to set and hold more effectively, it s unaffected by chafe from rocks or sharp surfaces on the bottom, its weight forms a curve that absorbs shock loads heavy weather. Hi-Test cha is made from higher carbon steel that has been surface-hardened. It has a higher strength-to-weight ratio than proof coil and is favoured by the weight-conscious, as it can reduce the weight the bow by up to 30% without sacrificg strength. Twisted Braided More stiff and less flexible Fairly easy to splice Generally less expensive Has more stretch than braided Has a tendency to kk or heckle Less stiff and more flexible Difficult to splice Looks better Easier on the hands Frequently stronger than twisted rope Less stretch than twisted rope Suggested Mimum Workg Rode Sizes* (For wds up to 30 knots.) BOAT BEAM (SAIL ) BEAM (POWER) ROPE (NYLON) CHAIN (HI-TEST) 10~15' 5~7' 5~7' 150-1/2 1/4 20~25' 8' 9' 150-1/2 1/4 26~30' 9' 10' 200-1/2 1/4 31~35' 10' 11' 200-9/16 5/16 36~40' 12' 13' 250-9/16 5/16 41~45' 13' 14' 250-5/8 3/8 46~50' 14' 16' 300-5/8 3/8 51~60' 16' 19' 350-3/4 1/2
11 Double Braided Anchor Rode (With G4 HT Cha) ROPE CHAIN BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA TOTAL lb / kg / kn lb / kg / kn 10517979 1/2"/12 150'/45m 1/4"/6 15'/5m 165'/50m 8100/3670/36 1620/735/7 10517981 1/2"/12 200'/ 60m 1/4"/6 15'/5m 215'/65m 8100/3670/36 1620/735/7 10517983 1/2"/12 250'/75m 1/4"/6 15'/5m 265'/80m 8100/3670/36 1620/735/7 10517985 1/2"/12 300'/90m 1/4"/6 20'/6m 320'/96m 8100/3670/36 1620/735/7 10517992 9/16" /14 150'/45m 5/16"/8 15'/5m 165'/50m 10400/4700/47 2080/940/9 10517997 9/16"/14 250'/75m 5/16"/8 15'/5m 265'/80m 10400/4700/ 47 2080/940/9 10518000 9/ 16"/14 300'/90m 5/ 16"/ 8 20'/6m 320'/96m 10400/4700/47 2080/940/9 10517990 5/ 8"/16 300'/90m 3/ 8"/10 20'/6m 320'/96m 13500/6100/61 2700/1220/12 10517991 5/8"/16 150'/45m 5/16"/8 15'/5m 165'/50m 13500/6100/61 2700/1220/12 10517993 5/8"/16 200'/60m 5/16"/8 15'/5m 215'/65m 13500/6100/61 2700/1220/12 10517995 5/8"/16 250'/75m 5/16"/8 20'/6m 265'/80m 13500/6100/61 2700/1220/12 10517998 5/8"/16 300'/90m 5/16"/8 20'/6m 320'/96m 13500/6100/61 2700/1220/12 10517987 5/8"/16 150'/45m 3/8"/10 15'/5m 165'/50m 13500/6100/61 2700/1220/12 10517988 5/8"/16 200'/60m 3/8"/10 15'/5m 215'/65m 13500/6100/61 2700/1220/12 10517989 5/8"/16 250'/75m 3/8"/10 20'/6m 265'/80m 13500/6100/61 2700/1220/12 10517990 5/8"/16 300'/90m 3/8"/10 20'/6m 320'/96m 13500/6100/61 2700/1220/12 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications Eight Strand Plaited Anchor Rode (With G4 HT Cha) ROPE CHAIN BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA TOTAL lb / kg / kn lb / kg / kn 10517980 1/2 /12 150 /45m 1/4 /6 15 /5m 165 /50m 5670/2522/25 1134/504/5 10517982 1/2 / 2 200 /60m 1/4 /6 15 /5m 215 /65m 5670/2522/25 1134/504/5 10517984 1/2 /12 250 /75m 1/4 /6 15 /5m 265 /80m 5670/2522/25 1134/504/5 10517986 1/2 /12 300 /90m 1/4 /6 20 /6m 320 /96m 5670/2522/25 1134/504/5 10525077 1/2 /12 150 /45m 1/4 /6 25 /7.5 m 175 /53m 5670/2522/25 1134/504/5 10525078 1/2 /12 150 /45m 1/4 /6 50 /15m 200 /60m 5670/2522/25 1134/504/5 10525079 1/2 /12 200 /60m 1/4 /6 50 /15m 250 /75m 5670/2522/25 1134/504/5
12 Eight Strand Plaited Anchor Rode (With G4 HT Cha) ROPE CHAIN BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA TOTAL lb / kg / kn lb / kg / kn 10525078 1/2 /12 150 /45m 1/4 /6 50 /15m 200 /60m 5670/2522/25 1134/ 504/5 10525079 1/2 /12 200 /60m 1/4 /6 50 /15m 250 /75m 5670/2522/25 1134/ 504/5 10525080 1/2 /12 250 /75m 1/4 /6 50 /15m 300 /90m 5670/2522/25 1134/ 504/5 10525081 5/8 /16 150 /45m 5/16 /8 25 /7.5 m 175 /53m 11650/5200/52 2330/1040/10 10525082 5/8 /16 150 /45m 5/16 /8 50 /15m 200 /60m 11650/5200/52 2330/1040/10 Three Strand Anchor Rode (with G4 HT Cha) 10525083 5/8 /16 200 /60m 5/16 /8 50 /15m 250 /75m 11650/5200/52 2330/1040/10 10525084 5/8 /16 250 /75m 5/16 /8 50 /15m 300 /90m 11650/5200/52 2330/1040/10 Three Strand Anchor Rode (With G4 HT Cha) ROPE CHAIN TOTAL BREAKING STRENGTH SAFE WORKING LOAD DIA WIRE DIA lb / kg / kn lb / kg / kn 10517777 1/2"/12 150'/45m 1/4" 6 15'/5m 165'/50m 7500/3400/34 1500/680/7 10517779 1/2"/12 200'/60m 1/4"/6 15'/5m 215'/65m 7500/3400/34 1500/680/7 10517781 1 2"/12 300'/90m 1/4" 6 20'/6m 320'/97m 7500/3400/34 1500/680/7 10525065 1 2 /12 150 /45m 1/4 /6 25 /7.5 m 175 /53m 7500/3400/34 1500/680/7 10525066 1 2 /12 150 /45m 1/4 /6 50 /15m 200 /60m 7500/3400/34 1500/680/7 10525067 1 2 /12 200 /60m 1/4 /6 50 /15m 250 /76m 7500/3400/34 1500/680/7 10525068 1 2 /12 250 /75m 1/4 /6 50 /15m 300 /91m 7500/3400/34 1500/680/7 10517782 9/16"/14 150'/45m 5/16"/8 15'/5m 165'/50m 8800/3995/39 1760/799/8 10517785 9/16"/14 200'/60m 5/16"/8 15'/5m 215'/65m 8800/3995/39 1760/799/8 10517996 9/16"/14 250'/75m 5/16"/8 20'/6m 265'/80m 8800/3995/39 1760/799/8 10517999 9/16"/14 300'/90m 5/16"/8 20'/6m 320'/97m 8800/3995/39 1760/799/8 10525069 9/16"/14 150 /45m 5/16"/8 25 /7.5 m 175 /53m 8800/3995/39 1760/799/8 10525070 9/16"/14 150 /45m 5/16"/8 50 /15m 200 /60m 8800/3995/39 1760/799/8 10525071 9/16"/14 200 /60m 5/16"/8 50 /15m 250 /76m 8800/3995/39 1760/799/8 10525072 9/16"/14 250 /75m 5/16"/8 50 /15m 300 /91m 8800/3995/39 1760/799/8 10517784 5/8"/16 200'/60m 5/16"/8 15'/5m 215'/65m 11650/5200/52 2330/1040/10 10525073 5/8 /16 150 /45m 5/16 /8 25 /7.5 m 175 /53m 11650/5200/52 2330/1040/10 10525074 5/8 /16 150 /45m 5/16 /8 50 /15m 200 /60m 11650/5200/52 2330/1040/10 10525075 5/8 /16 200 /60m 5/16 /8 50 /15m 250 /76m 11650/5200/52 2330/1040/10 10525076 5/8 /16 250 /75m 5/16 /8 50 /15m 300 /91m 11650/5200/52 2330/1040/10 10517787 5/8"/16 300'/90m 5/ 16"/8 15'/5m 320'/96m 11650/5200/52 2330/1040/10 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
13 Dock Le Titan Nylon Dock Les have a water-resistant coatg to prevent strength loss that occurs wet conditions. Higher twistg of yarns and strands produces a denser, rounder rope with higher abrasion resistance that is less likely to snag. Controlled manufacturg ensures a le that is well balanced, torque free and won t unlay under heavy loadg. Three Strand Dock Les Maximize shock absorption Superior wet and dry abrasion resistance A good choice for permanent dock les Double Braided Dock Les Softer and easier to handle,cleat and coil Stronger than comparable 3-strand dock les Best choice for dock les to carry onboard port to port 10618883 (WHT) 3/8 (10) 10'(3m) 10618884 (WHT); 10618888 (BLK) 3/8 (10) 15'(5m) AVG. STRENGTH dia length kg lb 10618885 (WHT); 10618889 (BLK) 3/8 (10) 20'(6m) 1900 3800 Three Strand Double Braided 10618886 (WHT); 10618890 (BLK) 3/8 (10) 25'(8m) 10618887 (WHT) 3/8 (10) 30'(9m) 10618891 (WHT); 10618896 (BLK) 1/2 (13) 15'(5m) 10618892 (WHT); 10618897 (BLK) 1/2 (13) 20'(6m) 10618893 (WHT); 10618898 (BLK) 1/2 (13) 25'(8m) 10618894 (WHT); 10618899 (BLK) 1/2 (13) 30'(9m) 10618895 (WHT) 1/2 (13) 35'(11m) 10618900 (WHT); 10618904 (BLK) 5/8 (16) 20'(6m) 10618901 (WHT); 10618905 (BLK) 5/8 (16) 25'(8m) 10618902 (WHT); 10618906 (BLK) 5/8 (16) 30'(9m) 10618903 (WHT); 10618907 (BLK) 5/8 (16) 35'(11m) 10618908 (WHT) 3/4 (19) 25'(8m) 10618909 (WHT); 10618911 (BLK) 3/4 (19) 30'(9m) 10618910 (WHT); 10618912 (BLK) 3/4 (19) 35'(11m) 10625095 (W G); 10625096 (BLK); 10625097(NAV) 3/8 (10) 10 (3m) 10618913(W/G); 10618916(BLK); 10618920(RED); 10618923(BLU); 10618926(NAV) 3/8 (10) 15'(5m) 10618914(W/G); 10618917(BLK); 10618921(RED); 10618924(BLU); 10618927(NAV) 3/8 (10) 20'(6m) 10618915(W/G); 10618918(BLK); 10618922(RED); 10618925(BLU); 10618928(NAV) 3/8 (10) 25'(8m) 10618919 (BLK) 3/8 (10) 30 (9m) 10625098 (BLK), 10625099 (NAV), 10625101 (W/G) 1/2 (13) 10 (3m) 10618929 (BLK); 10618937 (W/G); 10625100(NAV) 1/2 (13) 15'(5m) 10618930 (BLK); 10618933 (BLU); 10618935(NAV); 10618938 (W/G); 10618941(RED); 10618940 (TEAL) 1/2 (13) 20'(6m) 2100 4200 4500 9200 5300 10100 1900 3900 2200 4500 10618931 (BLK); 10618934 (BLU); 10618936(NAV); 10618939 (W/G); 10618942(RED) 1/2 (13) 25'(8m) 2200 4500 10618932 (BLK); 10625103 (W/G) 1/2 (13) 30'(9m) Eye splice specifications: 3/8 x 10 ft: 12 (305); 1/2 x 10 ft 1/2 x 30 ft: 12 (305); 5/8 x 15 ft 5/8 x 35 ft: 15 (381); 3/4 x 20ft 3/4 x 50 ft: 18 (457 ).
14 Dock Le avg. strength dia length kg lb 10625104 (BLK); 10625109 (NAV); 10625114 (W/G) 5/8 (16) 15'(5m) 10625105(BLK); 10625110 (NAV); 10625115 (W/G) 5/8 (16) 20'(6m) 10625106(BLK); 10625111 (NAV); 106; 25116 (W/G); 5/8 (16) 25'(8m) 10625107 (BLK); 10625112 (NAV); 10625117 (W/G); 5/8 (16) 30'(9m) 4700 9500 Double Braided 10625108 (BLK); 10625113 (NAV); 10625118 (W/G) 5/8 (16) 35 (11m) 10625119(BLK); 10625124(NAV); 10625129 ((W/G) 3/4 (19) 20'(6m) 10625120(BLK); 10625125 (NAV); 10625130 (W/G) 3/4 (19) 25'(8m) 10625121 (BLK); 10625126(NAV); 10625131 (W/G) 3/4 (19) 30'(9m) 10625122(BLK);10625127(NAV)10625132 (W/G) 3/4 (19) 35 (11m) 5550 11200 10625123 (BLK); 10625128(NAV);10625133 (W/G) 3/4 (19) 50 (15m) Fender Le Titan Premium Fender Le features: Low stretch polypropylene (PP) material Will float water Hand crafted 6-ch (152 ) eye splice Easy to handle Shock absorbent Can be stored wet Variety of colors & sizes to choose from Double Braided Three Strand 10618945 BREAKING LOAD COLOR DIA kg lb 6 (1.8 m) NAVY 10618946 6 (1.8 m) WHITE/GOLD 10618947 6 (1.8 m) BLACK 5/16 (8) 10619008 6 (1.8 m) BLUE 10619009 6 (1.8 m) WHITE 10619010 6 (1.8 m) RED 10618948 6 (1.8 m) BLACK 10618949 6 (1.8 m) NAVY 10618950 6 (1.8 m) BLUE 3/8 (10) 10618951 6 (1.8 m) WHITE 10618952 6 (1.8 m) WHITE/GOLD 10618953 6 (1.8 m) RED 730 1600 1045 2300 10618943 5/16 (8) 6 (1.8 m) 730 1600 WHITE 10618944 3/8 (10) 6 (1.8 m) 1045 2300
15 Hot Dip Galvanized Shackles FINISH: Hot Dip Galvanized PACKAGING: Individually labeled & bagged Easily identifiable copper colored p Anchor and Cha types Proof tested & load rated Workg load limit, size, logo stamped on every shackle Anchor Type BAIL PIN Exceeds RR-C-271 Type IV Grade A All of our Mare Shackles are Hot Dip Galvanized for premium corrosion resistance. Hot dip galvanized coatg on both the shackle & p. WORKING LOAD LIMIT BREAKING LOAD kn lb kg kn lb kg 10319050 1/4 6 5/16 8 5 1100 500 30 6600 3000 10319051 5/16 8 3/8 10 7.5 1650 750 45 9900 4500 10319052 3/8 10 7/16 11 10 2200 1000 60 13200 6000 10319053 7/16 11 1/2 13 15 3300 1500 90 19800 9000 10319054 1/2 13 5/8 16 20 4400 2000 120 26400 12000 10319055 5/8 16 3/4 19 32.5 7150 3250 195 42900 19500 10319056 3/4 19 7/8 22 47.5 10450 4750 285 62700 28500 10319057 7/8 22 1 25 65 14300 6500 390 85800 39000 10319058 1 25 1 1/8 29 85 18700 8500 510 112200 51000 10319059 1 1/8 29 1 1/4 32 95 20900 9500 570 125400 57000 10319060 1 1/4 32 1 3/8 35 120 26400 12000 720 158400 72000 10319061 1 3/8 35 1 1/2 38 135 29700 13500 810 178200 81000 10319062 1/4 6 5/16 8 5 1100 500 30 6600 3000 10319063 5/16 8 3/8 10 7.5 1650 750 45 9900 4500 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications 10319064 3/8 10 7/16 11 10 2200 1000 60 13200 6000 10319065 7/16 11 1/2 13 15 3300 1500 90 19800 9000 10319066 1/2 13 5/8 16 20 4400 2000 120 26400 12000 Cha Type 10319067 5/8 16 3/4 19 32.5 7150 3250 195 42900 19500 10319068 3/4 19 7/8 22 47.5 10450 4750 285 62700 28500 10319069 7/8 22 1 25 65 14300 6500 390 85800 39000 10319070 1 25 1 1/8 29 85 18700 8500 510 112200 51000 10319071 1 1/8 29 1 1/4 32 95 20900 9500 570 125400 57000 10319072 1 1/4 32 1 3/8 35 120 26400 12000 720 158400 72000 10319073 1 3/8 35 1 1/2 38 135 29700 13500 810 178200 81000
16 High Strength Hot Dip Galvanized Shackles FINISH: Hot Dip Galvanized PACKAGING: Individually labeled & bagged Anchor Type Cha Type BAIL PIN WORKING LOAD LIMIT Exceeds RR-C-271 Type IV Grade B All of our Mare Shackles are Hot Dip Galvanized for premium corrosion resistance. Hot dip galvanized coatg on both the shackle & p. Breakg strength exceeds that of high test G4 cha >30% stronger than standard Grade A shackles Bold black colored p Anchor and Cha types Proof tested & load rated Workg load limit, size, logo stamped on every shackle BREAKING LOAD kn lb kg kn lb kg 10321196 5/16 8 3/8 10 12.5 2750 1250 62.5 13750 6250 10319610 3/8 10 7/16 11 20 4400 2000 100 22000 10000 10319611 7/16 11 1/2 13 26 5720 2600 130 28600 13000 10319612 1/2 13 5/8 16 33 7260 3300 165 36300 16500 10319613 5/8 16 3/4 19 50 11000 5000 250 55000 25000 10319614 3/4 19 7/8 22 70 15400 7000 350 77000 35000 10319615 7/8 22 1 25 95 20900 9500 475 104500 47500 10319616 1 25 1 1/8 29 125 27500 12500 625 137500 62500 10319617 1 1/8 29 1 1/4 32 150 33000 15000 750 165000 75000 10319618 1 1/4 32 1 3/8 35 180 39600 18000 900 198000 90000 10319619 1 3/8 35 1 1/2 38 210 46200 21000 1050 231000 105000 10321197 5/16 8 3/8 10 12.5 2750 1250 62.5 13750 6250 10319620 3/8 10 7/16 11 20 4400 2000 100 22000 10000 10319621 7/16 11 1/2 13 26 5720 2600 130 28600 13000 10319622 1/2 13 5/8 16 33 7260 3300 165 36300 16500 10319623 5/8 16 3/4 19 50 11000 5000 250 55000 25000 10319624 3/4 19 7/8 22 70 15400 7000 350 77000 35000 10319625 7/8 22 1 25 95 20900 9500 475 104500 47500 10319626 1 25 1 1/8 29 125 27500 12500 625 137500 62500 10319627 1 1/8 29 1 1/4 32 150 33000 15000 750 165000 75000 10319628 1 1/4 32 1 3/8 35 180 39600 18000 900 198000 90000 10319629 1 3/8 35 1 1/2 38 210 46200 21000 1050 231000 105000 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications
17 Sterndrive Installation Jack PID:CMJACKV1 Hydraulic jack for ease of use, even with one operator 4 Pneumatic wheels allow easy movement the shop/yard Allows for easy and safe removal and stallation of stern drives 3-Axis adjustment for proper alignment and configuration Heavy duty liftg capacity WEIGHT kg/lb DIMENSIONS (L X W X H) PACKAGING (CRATE) DIMENSIONS (L X W X H) WORKING LOAD LIMIT Net Gross kg lb 74/163 82/180 1310x810x860 53x32x34 1230x825x20 48x32x8 250 550 Sterndrive Installation Jack Wheels PID:CMJACKFW PID:CMJACKRW
18 Self-Rightg Anchor Swivels Duplex Staless Steel Swivels provide self-rightg function if the anchor comes up upside-down, it will flip it over to the correct orientation. Streamled shape provides smooth retrieval over the bow roller Manufactured from high strength Duplex Staless Steel highly corrosion resistant and much stronger than 316L Attaches directly to anchor Models for anchors from 20-88lb (9-40kg) Rocna, Vulcan, and some plows Models for imperial and metric chas from 1/4 to 7/16 (7-11) PID ANCHOR SLOT WIDTH CHAIN SLOT WIDTH TS31SUK01 4.31 0.56 0.39 TS31SUK02 4.5 0.64 0.39 TS31SUK03 4.72 0.64 0.41 TS31SUK04 5.1 0.69 0.41 ANCHOR kg Vulcan 9-12, Rocna 10-15 Plough 10-16, Vulcan 15 Vulcan 20, Rocna 20, Plough 20 Rocna 25-33, Vulcan 25 CHAIN BREAKING STRENGTH lb WORKING LOAD lb 1/4",5/16",7,8 11600 3867 1/4",5/16",7,8 11600 3867 5/16", 9 11600 3867 5/16", 3/8", 10 16200 5400 Warng: Workg Load Limit must not be exceeded. Not to be used for liftg or hoistg applications TS31SUK05 5.1 0.813 0.41 Vulcan 33-40, Rocna 40 5/16", 3/8",11,7/16" 21600 7200
19 Cha Packagg Options and Merchandisg Solutions PACKAGING OPTION DIAMETER HEIGHT cm cm Full Drum 16½ 41.9 29 73.7 Half Drum 16½ 41.9 15 38.1 Plastic Pail 12 x 9½ 30.5 x 24.1 14½ 36.8 Full Drum Half Drum Plastic Pail 6-Pail Display PID: 10316046 Our space-savg, cha merchandiser is built tough to hold over 660 lb (300 kg) of cha with its small footprt. Each shelf is specially designed and custom fitted to lock pails to place to ensure stability and safety. Includes heavy-duty casters. Shelves are custom fitted to lock pails to place to ensure safety and stability. 42 1/8 107 cm 15½ 39.4 cm 7 1/8 18.1 cm 24 61 cm 13 3/8 34 cm CMTITANBRO V2