HYDAC KineSys Motion Control Systems
Thermal power plants Materials handling Iron and steel industry Renewable energies Presses Plastic injection machines Your Partner for Expertise in Motion Control Solutions. Meeting all the requirements for efficient drive solutions. With over 7,500 employees worldwide, HYDAC is one of the leading suppliers of fluid technology, hydraulic and electronic equipment. Our wide range of products, combined with our acknowledged expertise in development, manufacturing, sales and service, is key to designing and manufacturing modern and reliable drive systems. Global and yet local. With over 45 overseas companies, and more than 500 sales and service partners, HYDAC is within easy reach of its customers and is a reliable partner worldwide. System solutions. One supplier. One contact. Wherever you need us, we are there to help you find the most effective solution in almost every industry, from components to a complete system. E 10.143.0/04.13 Machine tools 5 Municipal machines 2
Service and service systems. Worldwide. Service and service systems for commissioning, maintenance and repair. 70-80 % of all breakdowns in hydraulic and lubrication systems are due to excess contamination of the fluids and components used. In practice, this is often not sufficiently recognized. Regular monitoring of the operating and system parameters prevents expensive stoppages. The HYDAC Servicenter monitors, for example, the oil condition, oil level, filter condition, accumulator pressures and valve settings. Shocks and vibrations are recorded using the latest measurement technology, parameters analysed and logged. Using this information as a basis, inspection intervals are adapted to the requirements. In addition to these general maintenance tasks, the special functions the HYDAC Servicenter also carries out are the repeat inspections required by the Pressure Equipment Directive or the integration of pressure accumulators which are already in operation into the new BetrSichV (German law on Industrial Health and Safety). Starting with the setup, installation and connection, through to system flushing, pressure testing and actual commissioning, an experienced team of project managers, electronic engineers, electricians, hydraulic engineers, fitters and welders are available for deployment around the globe. Whether commissioning entire hydraulic systems, actuators and other systems, or connecting new components or integrating subsystems, such as offline filtration units, into an existing system we have the right equipment and the right team for all applications. 3
KineSys The modern motion control system The demand for high productivity whilst ensuring efficient use of resources increasingly forms part of the customer specification for modern machines and systems. Given the background of steadily rising energy and raw material costs, the efficient design of the drive system is an important component in the overall life cycle cost. Using the experience gained from many international projects, our industry and product specialists will analyse your application. Together we develop quick and effective economical solutions. Depending on the application, different strategies are selected for the drive tasks, from a simple control right up to highly dynamic controls. To help in this process we make use of a wide variety of test rigs and simulation systems. It makes no difference whether it is a case of developing and manufacturing individual stationary or mobile systems, or implementing series production solutions. With access to the entire range of Hydac products we can provide you with the best solution for your requirements. This streamlines the design and ensures maximum efficiency for the operation of your machine and system. Providing you with the best solution is our challenge. Hydraulic side High power density Robustness Simple overload limiting procedure Simple linear movement implementation Electromechanical side Simple controllability Quiet Simple integration into higher-level control Energy efficiency Advantages of KineSys products and solutions: 4 Increases productivity Reduces noise emissions Longer service life of the components Streamlines the design Integrates safety functions
KineSys The intelligent motion control system Variable speed drive (DVA) Variable speed drives (DVA) are the perfect example of symbiosis between hydraulics and electromechanics. The drive motor can be switched on and controlled by the integrated control according to requirements. Power dissipation can be reduced to a minimum and the productivity can be maximised by adapting the KineSys solution to the conditions. In addition to the selection of suitable motor designs, different pump designs offer further degrees of freedom. Product features of the DVA-Kit KineSys motor-pump units are a user-friendly and energy-efficient solution for use in small to medium sized constant pressure systems. The pre-configured systems comprise a standard electric motor with an integral frequency inverter coupled to an external gear pump. To complete the system, a hydraulic manifold block with pump protection and optional accumulator is added. Product features of customised motor-pump unit Customised motor-pump units can be configured with standard motors or HYDAC servo motors (HSM) and various pump models. A suitable valve control can also be adapted to the drive unit. Characteristics Available in power range 0.75 22 kw Optional internal gear pump Valve block can be flanged directly onto the pump Tank installation also possible using adapter block Fully parameterised Plug & Play unit Characteristics Max. pressure: 350 bar Power: 5 kw 60 kw (depending on the application, other power ratings possible) Product advantages: 5 Continuous operation with constant pressure possible for specific applications Variable speed accumulator charging circuit with shut-off function can be integrated Variable pressure and flow level Various control algorithms are integrated
KineSys The variable motion control system Electro-cylinders (HEZ) To achieve simple linear movement, HYDAC Electrocylinders (HEZ) are ideal as they are simple to install and are maintenance-free. In the HEZ, rotary motion of the electric motor is converted to linear motion via a screw drive. By selecting the gear and drive, various actuating forces, travel speeds and duty cycles can be achieved. Just as with the variable speed drive, various drive designs can be selected, from simple to highly accurate positioning. Product features of standard HEZ product range Dynamic actuation force up to 25 kn Stroke velocity up to 1 m/s Stroke up to 2,000 mm Duty cycle, model-dependent, up to 100 % Selection of various sensors possible Depending on the application, technical data may vary I Series U Series L Series Product advantages: Product range with stroke length to suit customer needs Practically maintenance-free Quiet operation Compact drive unit Self-locking possible Excellent environmental compatibility 6
KineSys The optimised motion control system Application-specific solutions We supply complete systems, sub-systems and complex, controlled drive units, including electrical equipment and electronics for mobile and industrial machines and systems. From the component to the individual drive system solution. Drive unit for main and auxiliary functions on a structural steel cutting machine: 70 % saving in energy Reduces tank volume by 50% Robust switching valves only are used Reduces noise by more than 10 dba Drive unit for two hydraulic motors used in log crushing: 2 x 30 kw speed controlled Q max = 150 l/min per unit Speed control: 0-60 rpm HEZ raising cylinders for mobile application: Actuating power 110 kn Drive power 4 kw Actuation speed 15 mm / s Low temperature application Application solutions for your drive task. 7
Cooling Systems DEF 5.700 Electronics E 180.000 Accessories E 61.000 Compact Hydraulics 53.000 Filter Systems E 79.000 Process Technology E 77.000 Fluid Filters E 70.000 Accumulators E 30.000 Globale Presence. Local Expertise. www.hydac.com HYDAC Head Office HYDAC Companies HYDAC Sales and Service Partners HYDAC International GMBH Industriegebiet 66280 Sulzbach/Saar Germany Telephone: +49 6897 509-01 Fax: +49 6897 509-577 E-Mail: kinesys@hydac.com Internet: www.hydac.com