Dear Valued Customer: What makes Gulf Rubber a uniquely different rubber supply company? The answer is clear; it is our team of dedicated people. We have over 100 years of experience in the fluid sealing industry ranging from cryogenics to extreme high temperature and from chemicals to potable water. This environment of experience and expertise matched with the drive and passion of our younger employees equates to a dynamic company. With continued commitment to the future, our goal is to extend our knowledge through new products and applications. In addition, we will continue to offer quality sealing products, great customer service, outstanding workmanship and on time deliveries all in an effort to work for you our customer. Best regards, Michael C. Henry President 1120 McDaniel Houston, Texas 77022 Pg 1
Pg 2 888.692.7114 www.gulfrubberco.com
TABLE OF CONTENTS GASKETS & GASKET MATERIALS Pages 5-38 GASKET ACCESSORIES Pages 39-43 GASKET DIMENSIONS Pages 44-47 BRAIDED & COMPRESSION PACKINGS Pages 48-56 O-RINGS & O- RING MATERIALS Pages 57-70 VALVES AND GAUGES Pages 71-74 INDUSTRIAL GLASS Pages 75-77 GENERAL INFORMATION Pages 78-85 GLOSSARY OF TERMS Pages 86-87 1120 McDaniel Houston, Texas 77022 Pg 3
Pg 4 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS SHEET MATERIALS RED RUBBER Red Styrene Butadiene Rubber. Excellent low cost material for flange gaskets. Non-oil resistant compound that resists flow under compression. Conforms well to uneven flange surfaces. Durometer 75 + or 10/-5. Tensile Strength 400 psi. Temperature -20 F to 175 F. PURE GUM RUBBER Natural rubber used for high abrasion and resiliency applications. Conforms to irregular flanges. Resists most organic salts, acids, alkalis and ammonia. Not recommended for ozone or oil resistance. Durometer 40 + or 5. Temperature -20 F or 150 F. Tensile strength 2000 psi. Elongation 600%. HYPALON Hypalon is highly resistant to most acids and other corrosives. It is most commonly used as a covering in soil burial as it is unaffected by soil chemical and moisture. Excellent ozone and UV resistance. Durometer 60 + or 5. Temperature -20 F to 200 F. Tensile strength 1500 psi. Elongation 300%. EPDM PEROXIDE CURED Resistance to heat, chemical and ultraviolet light. Excellent for outdoor application. Good electrical and dynamic properties. Material is not oil resistant. Durometer 60 + or 5. Temperature -40 F to 250 F. Tensile Strength 850 psi. Elongation 300%. 1120 McDaniel Houston, Texas 77022 Pg 5
GASKETS & GASKET MATERIALS EPDM SPONGE Closed Cell EPDM sponge used in applications exceeding the temperature and performance capabilities of Nitrile sponge. Medium Density. Temperature -65 F to 250 F. FLUOROELASTOMER (VITON) Excellent high temperature capability with resistance to a wide range of chemicals and acids. Good abrasion resistance. Durometer 75 + or 5. Temperature -20 F -400 F. Tensile strength 800 psi. Elongation 225%. FLUOROELASTOMER (VITON) SPONGE Medium density closed cell sponge sheet with excellent high temperature capability and resistance to a wide range of chemicals. Temperature -10 F to 400 F. NEOPRENE Good general service rubber. Most widely used in gaskets, sealing and weather stripping. moderate resistance to oil and ozone. Available in 40 and 60 Durometers. Temperature -20 F to 180 F. Tensile strength 850 psi. Elongation 300%. BUNA (NITRILE) Excellent rubber for all types of washers and gaskets that require resistance to conditions of oil and aromatic fuels. Good general service rubber. Available in 50, 60, 70 and 90 durometers. Temperature -20 F to 170 F. Tensile Strength 850 psi. Elongation 350%. BUNA (NITRILE) WHITE Good resistance to oily and greasy food products. Good resistance to abrasion. Non toxic and non marking. Manufactured from FDA approved ingredients. Durometer 55 + or 5. Temperature -20 F to 170 F. Tensile strength 900 psi. Elongation 350%. Pg 6 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS BUTYL Butyl has a good resistance to gas permeation. Non-oil resistant. Good Resistance to abrasion and flexing. Durometer 60 + or 5. Temperature -40 F to 180 F. Tensile strength 1100 psi. Elongation 400%. SILICONE Silicone provides high and low temperature capability and maintains good flexibility. Durometer 50 and 70 + or 5. Temperature -80 F to 450 F. Tensile strength 700 psi. Elongation 250%. Red in color. Also available in white color. SILICONE SPONGE Medium density closed cell Silicone sponge. Temperature -80 F to 450 F. Red in color. CLOTH INSERTED BLACK RUBBER Good flange gasket material for air, hot and cold water, low pressure steam or hydraulic services. Works well in all types of gauges, meters and valves where pressure areas tend to move. SBR compound with cotton duck insertion. One ply per 1/16 thickness. Durometer 60 + or 5. Temperature 0 F to 180 F. Tensile strength 400 psi. Elongation 200%. CORRUGATED RUBBER MATTING Rubber roll with 1/8 wide ribs providing good wear resistance and safety protection. NEOPRENE COTTON DUCK INSERTED Neoprene rubber diaphragm reinforced with cotton duck for balanced structural strength. Used to transmit motions between gases and fluids in valves and gauges. One ply per 1/16 thickness. Durometer 70 + or 5. Temperature -20 F to 200 F. Tensile strength 1000 psi. Elongation 300%. 1120 McDaniel Houston, Texas 77022 Pg 7
GASKETS & GASKET MATERIALS NEOPRENE NYLON INSERTED Neoprene rubber diaphragm reinforced with nylon to add structural strength. Durometer 70 + or 5. Temperature -40 F to 200 F. Tensile strength 1500 psi. Elongation 300%. BUNA (NITRILE) NYLON INSERTED Buna rubber diaphragm reinforced with nylon. Durometer 70 + or 5. Temperature -20 F to 200 F. NEOPRENE FIBERGLASS INSERTED Neoprene rubber reinforced with fiberglass. Thickness.024 NON ASBESTOS COMPRESSED SHEET Compressed gasket material utilizing NBR elastomer reinforced with both Aramid and mineral fiber. Designed for general service use. Excellent mechanical, thermal and chemical resistant properties. This material is produced using a two-roll calendering process under high compression resulting in high density composite with greater stability. Colors green, blue, white. Temperature -40 F to 480 F continuous. NITRILE PVC SPONGE Black closed cell Nitrile PVC sponge sheet. Well suited for stripping and die cut parts. Medium density. Temperature -20 F to 160 F. Tensile strength 70 psi. Elongation 100%. Available in firm density also. With our without pressure sensitive adhesive back. FIBERGLASS CLOTH Fiberglass woven fabric 14 oz weight. Temperature to 1000 F. Available in tan and red colors. Pg 8 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS PLANT FIBRE Excellent grade of vegetable fibre sheet packing, efficiently saturated with a glueglycerin impregnant rendered insoluble by means of a tanning agent (formaldehyde) to give a strong, flexible, all-proof packing with properties retained during proper storage and use. Used in sealing oils, gasoline, greases, water and air. Temperature to 250 F. Tensile strength 2000 psi. PLANT FIBRE/RUBBER CS-301 Made from cellulose fibre, cork and styrene butadiene rubber (SBR). A tendency to swell moderately without disintegrating in water or oil makes this fibre sheet a dependable seal in services not involving aromatic fuels and solvents. Temperature to 300 F. Tensile strength 700 psi minimum. PLANT FIBRE/BUNA-N CN-705 Made from cellulose fibre, cork and Buna-N. It is generally suitable for oil, gasoline and water services. Combines high compressibility and high crush strength. Temperature to 300 F. Tensile strength 1000 psi. CORK/NEOPRENE Neoprene rubber blended with cork particles for gaskets with narrow flanges and for low bolt load applications. Soft, medium and firm density. Temperature to 275 F. CORK/NITRILE (BUNA) Buna rubber blended with cork particles for gaskets with narrow flanges and for low bolt load applications. For oil and non-aromatic petroleum derivatives. Soft, medium and firm density. Temperature to 275 F. 1120 McDaniel Houston, Texas 77022 Pg 9
GASKETS & GASKET MATERIALS CORK AND SPONGE RUBBER ADHESIVE BACKED Cork and sponge rubber composition that combines lasting resilience with high surface friction. Eliminates squeaks, and absorbs shock. Pressure sensitive back. Die cut gaskets or strip. FELT Felt is used for its anti-vibration qualities and has excellent oil retention properties, providing a range of uses in most industries. Die Cut gaskets and strip. F-1 White firm felt F-3 Grey firm felt F-13 Grey medium felt CERAMIC FIBRE PAPER Paper is an alumino-silicate ceramic fiber based non-woven fabric. Manufactured through a special paper-making process with high purity washed fibers. White color, light weight, flexible, good handling strength and good uniformity. Low thermal conductivity, low heat storage, and thermal shock resistant. Good dielectric strength. Resists most chemicals except hydrofluoric, phosphoric acids and concentrated alkalis. Good for die-cut and automatic stamping. Density 10 lb/cu. Ft. Temperature 1,888 F for continuous use, 2300 F maximum. Tensile strength 25 psi. TEFLON Teflon has high tensile strength, low coefficient of friction, and excellent temperature capability and is resistant to most acids and chemicals. PH range 0-14. Temperature -450 F to 500 F. Tensile strength 5000 psi. EXPANDED TEFLON Soft expanded Teflon sheet is made from virgin PTFE and is more conformable than standard Teflon sheet. Resistant to chemical attack, high creep resistance, high compressibility and excellent memory. Temperature to 500 F. Tensile strength 1500 psi. Pg 10 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS FIBERGLASS TAPE Dry fiberglass tape withstands temperatures up to 1000 F. Used in wrapping steam lines, hoses, piping and high temperature ovens. THERMICULITE SHEET Gasket material used in applications involving oxidizing agents and extreme temperature requirements. Excellent chemical compatibility. Cryogenic service. 715 Homogeneous sheet. Temperature up to 850 F. 815 Reinforced with.004 thick 316 stainless steel tanged core. Temperature up to 1800 F. PTFE FILLED SHEET Gasket material with good resistance against creep and cold flow. Excellent chemical compatibility. Temperature up to 500 F. Blue PTFE glass microsphere for applications involving glass lined, plastic or ceramic flanges. Fawn PTFE and silica for use in aggressive chemicals and concentrated acids. White PTFE filled with barium sulfate for strong caustics, and general chemical media. 1120 McDaniel Houston, Texas 77022 Pg 11
GASKETS & GASKET MATERIALS Pg 12 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS CMP-4000 Engineered for high-pressure oil, steam, Glycol & water applications CMP-4000 is a solvent-free, high-density Hydro-Fused gasket material that delivers high crush resistance, exceptional torque retention, outstanding resistance to blow-out and high surface friction on flange surfaces; making it perfect for MRO use as well as OEM applications. Its unique formulation features a blend of binders that, while resistant to most fluids, generate sufficient expansion to provide superior sealing characteristics in harsh operating conditions. Recommended for use with intermittent operating temperatures up to 350 C (650 F). OEM applications include oil sealing and fuel system gasketing, and compressors. High performance aftermarket kits cover applications like ATVs, dirt bikes and snowmobiles. 1120 McDaniel Houston, Texas 77022 Pg 13
GASKETS & GASKET MATERIALS Pg 14 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 15
GASKETS & GASKET MATERIALS Pg 16 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 17
GASKETS & GASKET MATERIALS Pg 18 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 19
GASKETS & GASKET MATERIALS Pg 20 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 21
GASKETS & GASKET MATERIALS Pg 22 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 23
GASKETS & GASKET MATERIALS Pg 24 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 25
GASKETS & GASKET MATERIALS Pg 26 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 27
GASKETS & GASKET MATERIALS Pg 28 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 29
GASKETS & GASKET MATERIALS Pg 30 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 31
GASKETS & GASKET MATERIALS Pg 32 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 33
GASKETS & GASKET MATERIALS Pg 34 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 35
GASKETS & GASKET MATERIALS Pg 36 888.692.7114 www.gulfrubberco.com
GASKETS & GASKET MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 37
GASKETS & GASKET MATERIALS Pg 38 888.692.7114 www.gulfrubberco.com
GASKET ACCESSORIES 1120 McDaniel Houston, Texas 77022 Pg 39
GASKET ACCESSORIES Pg 40 888.692.7114 www.gulfrubberco.com
GASKET ACCESSORIES 1120 McDaniel Houston, Texas 77022 Pg 41
GASKET ACCESSORIES Pg 42 888.692.7114 www.gulfrubberco.com
GASKET ACCESSORIES 1120 McDaniel Houston, Texas 77022 Pg 43
GASKET DIMENSIONS Pg 44 888.692.7114 www.gulfrubberco.com
GASKET DIMENSIONS 1120 McDaniel Houston, Texas 77022 Pg 45
GASKET DIMENSIONS Pg 46 888.692.7114 www.gulfrubberco.com
GASKET DIMENSIONS 1120 McDaniel Houston, Texas 77022 Pg 47
BRAIDED & COMPRESSION PACKINGS Product Data For Style T-100 Marine Flax Packing Construction: Plaited from premium grade, long-line, high tensile strength flax fiber and sealed with a superior waterproof, tallow base lubricant. ph Range: 6 9 (Brines, cold water and oils) Temperature Limit: -10 F to 200 F (-23 C to 93 C) Pressure Limit: 400 psi (27.5 bar) Shaft Speed: 2200 fpm (11 m/s) Service: Designed particularly for marine stern tubes, bilge pumps and rudder posts. Size 1/8 3/16 ¼ 5/16 3/8 7/16 ½ 5/8 ¾ 7/8 1 Ft/Lb 101.00 40.37 36.96 20.00 13.30 10.00 8.00 5.10 3.80 1.81 1.44 Sold in 10 lb boxes. Pg 48 888.692.7114 www.gulfrubberco.com
BRAIDED & COMPRESSION PACKINGS Product Data For Style T-105 Marine Flax Packing Construction: Plaited from long-fiber, flax impregnated with TFE and Lubricated to provide a flexible, formable and long-service packing. ph Range: 6 9 (Brines, cold water and oils) Temperature Limit: -10 F to 220 F (-23 C to 104 C) Pressure Limit: 400 psi (27.5 bar) Shaft Speed: 2200 fpm (11 m/s) Service: Designed particularly for marine stern tubes, bilge pumps and rudder posts. Size 1/8 3/16 ¼ 5/16 3/8 7/16 ½ 5/8 ¾ 7/8 1 Ft/Lb 101.00 40.37 36.96 20.00 13.30 10.00 8.00 5.10 3.80 1.81 1.44 Sold in 10 lb boxes. 1120 McDaniel Houston, Texas 77022 Pg 49
BRAIDED & COMPRESSION PACKINGS Product Data For Style T-205 Impregnated Syn-Tex Material: Construction: PTFE Impregnated Syn-Tex Interwoven Braid ph Range: 2-12 Temperature Limit: -10 F to 450 F (-23 C to 232 C) Pressure Limit: Shaft Speed: 1500 psi (103.5 bar) 2300 fpm (11.7 m/s) P V Factor: 335,000 Service: Cost-effective combination of absorbent synthetic-textile staple yarn. The thirsty nature of the proprietary yarn permits a 50 percent pick-up of virgin PTFE suspensoid. The fibers are protected from chemical attack, running friction is reduced, and sealability is enhanced. Low gland follower squeeze extends the packing and sleeve life and decreases motor energy draw. The entire packing is saturated in proprietary break-in lubricant, aiding in initial start-up and preventing over-heating and glazing. Style T-205 is proven in centrifugal pumps, mixers, blenders, agitators and knife gate valves. Size 1/8 3/16 ¼ 5/16 3/8 7/16 ½ 5/8 ¾ 7/8 1 Ft/Lb 82.00 39.00 25.23 16.91 12.00 9.00 6.40 4.20 3.00 2.10 1.73 Sold in 10 lb boxes. Pg 50 888.692.7114 www.gulfrubberco.com
BRAIDED & COMPRESSION PACKINGS Product Data For Style T-350 TFE Filament Food Process and Chemical Service Packing Material: Construction: Pure White virgin eptfe filament and impregnated with PTFE (an inert silicone softener/lubricant is used) Interwoven Braid ph Range: 0-14 Temperature Limit: -400 F to 500 F (-240 C to 260 C) Pressure Limit: Shaft Speed: 1000 psi (69 bar) 1200 fpm (7 m/s) P V Factor: 275,000 Tensile Strength: 500,000 psi (254 bar) Service: Meets specification MIL P-24396, Type A (Ships). Produced from pure, virgin TFE filament and carefully impregnated before braiding with a suspensoid on TFE and an inert softener/lubricant. For a secure bond between these materials, only virgin TFE is employed. TFE suspensoid blocks leakage through the braid. Recommended for rotating service in pumps, mixers, agitators and kettles. Size 1/8 3/16 ¼ 5/16 3/8 7/16 ½ 5/8 ¾ 7/8 1 Ft/Lb 52.48 34.99 19.29 14.70 10 8.60 5.80 3.50 2.60 2 1.45 Sold in 10 lb boxes. 1120 McDaniel Houston, Texas 77022 Pg 51
BRAIDED & COMPRESSION PACKINGS Product Data For Style T-400 eptfe Graphite Composite Packing Material: Construction: ph Range: eptfe/graphite with an inert lubricant Interwoven Braid 0 14 (all fluids except strong oxidizers in the 0-2 ph range, such as oleum, fluorine, fuming nitric acid and aqua regia) Temperature Limit: -400 F to 550 F (-240 C to 288 C) Pressure Limit: Shaft Speed: 1900 psi (131 bar) 3800 fpm (19.3 m/s) Service: T-400 is eptfe/graphite so it cannot harm shaft sleeves. Excellent heat dissipation prevents glazing and scoring whereby increasing packing and sleeve service life. In addition, less energy is used to turn the shaft and a lower leak-off may be attained. Recommended for rotating pumps and valves in virtually any chemical or abrasive slurry. It is an excellent choice for sludge, paper, chemical and mining pumps. Especially effective in asphalt pumps. Size 1/8 3/16 ¼ 5/16 3/8 7/16 ½ 5/8 ¾ 7/8 1 Ft/Lb 62.48 44.47 26.24 15.53 10.10 7.72 5.79 3.95 2.79 2.12 1.63 Sold in 10 lb boxes. Pg 52 888.692.7114 www.gulfrubberco.com
BRAIDED & COMPRESSION PACKINGS Product Data For Style T-500 Graphite Impregnated Kynol/Aramid Composite Packing Material: Construction: Quadrasyn composite containing Kynol/Aramid heavily impregnated with exclusive impregloid solid impregnant/lubricant. Plaited (square) braid ph Range: 3-11 Temperature Limit: -400 F to 600 F (-240 C to 316 C) Pressure Limit: Shaft Speed: 200 psi (14 bar) in pumps 1800 psi (124 bar) in valves to 2000 fpm (10.16 m/s) P V Factor: to 650,000 Resistance Abrasion: Service: Moderate to high Designed for a wide variety of rotating and oscillating equipment including pumps, mixers, agitators and blenders. Unlike conventional packings, T-500 does not employ a liquid lubricant, thus reducing packing shrinkage and the resulting need for constant gland adjustment. Because of its unique fiber and lubricant, T-500 s sealability is exceptionally high, allowing the use of lighter gland pressure to achieve the same degree of sealing found in conventional packings. Lighter gland pressure results in lower packing pressure against the shaft or sleeve, causing a substantial decrease in frictional drag, frictional heat and wear on both shaft and packing. This leads to extended life, reduced fluid loss, lower down-time and increased efficiency (machinery runs cooler with reduced energy consumption). Recommended for general service in water, oils, brines, solvents, milk acids and alkalis. Size 1/8 3/16 ¼ 5/16 3/8 7/16 ½ 5/8 ¾ 7/8 1 Ft/Lb 92.00 48.00 29.48 18.10 13.76 11.93 9.34 5.83 4.64 3.10 2.50 Sold in 10 lb boxes. 1120 McDaniel Houston, Texas 77022 Pg 53
BRAIDED & COMPRESSION PACKINGS Pg 54 888.692.7114 www.gulfrubberco.com
BRAIDED & COMPRESSION PACKINGS 1120 McDaniel Houston, Texas 77022 Pg 55
BRAIDED & COMPRESSION PACKINGS Pg 56 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 57
O-RINGS & O-RING MATERIALS O-RING MATERIAL DESCRIPTIONS NBR (NITRILE, BUNA) HNBR, HSN -40 F to 250 F -40 F to 320 F Presently the seal industry s most widely used elastomer. Nitrile combines excellent resistance to petroleum-based oils and fuels, silicone grease, hydraulic fluids, water and alcohol. It has a good balance of working properties such as low compression set, high tensile strength, and high abrasion resistance, combined with a low cost. A nitrile compound with excellent resistance to petroleum oils and sour gas. HSN has excellent wear, low compression set and good chemical resistance while maintaining a good temperature range. HSN is becoming a more preferred compound in the oilfield industry. TFEP (Aflas) FKM (Viton) -20 F to 400 F -15 F to 400 F Aflas is a unique fluoroelastomer, a copolymer of tetrafluoroethylene and propylene. It has shown excellent resistance to petroleum oils, steam, hydrogen sulfide and amine corrosion inhibitors, It has show excellent heat and chemical resistance. Due to its resistance to sour gas and steam it has found numerous applications in the oilfield industry for chemical injection pumps, downhole oilfield packer elements and numerous other sealing applications. Featuring excellent resistance to petroleum products and solvents, with good high temperature and low compression set characteristics. For use with wide chemical exposure situations, and low gas permeability. The family of Viton materials and uses are as follows: A general service Viton used for many chemical applications. B - shows improved resistance in aqueous inorganic acids. F/GF for use in hot water, steam and has improved acid resistance (vs B) ETP-Extreme strong bases, polar solvents most chemical resistant. GLT exhibits best low temperature capability. GFLT exhibits low temperature and chemical Pg 58 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS EPDM, EPR PTFE TEFLON -65 F to 300 F -65 F to 500 F Ethylene propylene has excellent ozone and chemical resistance characteristics. Although it is resistant to hydrogen sulfide it is not compatible with hydrocarbons and therefore has seen limited applications in the oilfield. It is also excellent for steam applications. PTFE has found numerous uses in oilfield applications, as it is the most chemical resistant thermoplastic available. If offers low friction and sealability not found with most plastic materials, however it is subject to cold flow or creep. Adding fillers such glass, moly, carbon and bronze can reduce this creep. PTFE is used for valve seats, stem packing, pump packing, downhole tools, bearing rings and spacer rings. CR (Neoprene) Fluorosilicone -65 F to 250 F -80 F to 400 F Neoprene has the unique combination of resistance to weathering as well as resistance to petroleum lubricants within its temperature capabilities. It also has good resistance to flexing and tear. It has limited service in the oilfield applications due to lack of chemical and thermal resistance. Fluorosilicone combines the excellent high and low temperature properties of silicone, but has a much better resistance to a wider variety of fluids. Fluorosilicones are commonly used in aircraft fuel systems Silicone -80 F to 450 F Silicone possesses an excellent resistance to temperature extremes. Most commonly used in static applications due to its poor tear and abrasion resistance. Silicone is not often used in oilfield applications other than for static gaskets or dry heat service such as valve covers or inspection plates. 1120 McDaniel Houston, Texas 77022 Pg 59
O-RINGS & O-RING MATERIALS Pg 60 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 61
O-RINGS & O-RING MATERIALS Pg 62 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 63
O-RINGS & O-RING MATERIALS Pg 64 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 65
O-RINGS & O-RING MATERIALS Pg 66 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS 90 1120 McDaniel Houston, Texas 77022 Pg 67
O-RING CORD SELECTIONS O-RINGS & O-RING MATERIALS BUNA (NITRILE) 70 DUROMETER BUNA (NITRILE) 90 DUROMETER Standard Standard Metric Standard.070.313 1mm.125.093.375 2mm.139.103.437 2.4mm.187.125.500 3mm.210.139.625 4mm.275.187.750 5mm.313.210 1.00 5.7mm.375.250 6mm.437.275 8mm.500 FLUOROELASTOMER (VITON) 75 DUROMETER Standard Standard Metric.070.313 2mm.093.375 2.4mm.103.437 3mm.125.500 4mm.139.625 5mm.187.750 6mm.250 1.00.275 EPDM (EPR) 70 DUROMETER Standard Standard.070.250.093.275.103.313.187.375.210.500 Pg 68 888.692.7114 www.gulfrubberco.com
O-RINGS & O-RING MATERIALS 1120 McDaniel Houston, Texas 77022 Pg 69
O-RINGS & O-RING MATERIALS Pg 70 888.692.7114 www.gulfrubberco.com
VALVES AND GAUGES BALL VALVES Brass Full Port Ball Valves have a brass body, ball and seat. Valves have a PTFE seat, washer and packing. NPT threaded female x female. 1 pc construction. FBV25 ¼ 600 PSI FBV50 ½ 600 PSI FBV075 ¾ 550 PSI FBV100 1 550 PSI FBV150 1-1/2 300 PSI FBV200 2 225 PSI FBV250 2-1/2 225 PSI FBV300 3 225 PSI FBV400 4 225 PSI Stainless Steel Standard Port Ball Valves have a 316SS body, ball and stem. Valves have a PTFE seat, washer and packing. NPT threaded female x female. 1 pc construction. SSBV50 ½ 800 PSI SSBV75 ¾ 800 PSI SSBV100 1 800 PSI SSBV125 1-1/4 800 PSI SSBV150 1-1/2 800 PSI SSBV200 2 800 PSI Stainless Steel Full Port Ball Valves have a 316ss body, ball and stem. Valves have a PTFE seat, washer and packing. NPT threaded female x female. 2 pc construction. SSBV50 ½ 800 PSI SSBV75 ¾ 800 PSI SSBV100 1 800 PSI SSBV125 1-1/4 800 PSI SSBV150 1-1/2 800 PSI SSBV200 2 800 PSI 1120 McDaniel Houston, Texas 77022 Pg 71
VALVES AND GAUGES GAUGES Stainless steel gauges provide the corrosion resistance and the durability of a permanently sealed gauge. 2-1/2 FACE DRY GAUGE PSI PART # 0-15 GSS-15 316 series stainless steel solid back 0-30 GSS-30 case with Polycarbonate window 0-60 GSS-60 0-100 GSS-100 ¼ lower mount stainless steel connector 0-160 GSS-160 0-200 GSS-200 316 stainless steel bourdon tube 0-300 GSS-300 0-400 GSS-400 316 series stainless steel movement with 0-600 GSS-600 stainless steel internals 0-1000 GSS-1000 0-1500 GSS-1500 ambient temperature range 0-2000 GSS-2000 0 to + 150 F 0-3000 GSS-3000 0-5000 GSS-5000 2-1/2 FACE LIQUID FILLED PSI PART # 0-15 GLSS-15 316 series stainless steel solid back 0-30 GLSS-30 case with Polycarbonate window 0-60 GLSS-60 0-100 GLSS-100 ¼ lower mount stainless steel connector 0-160 GLSS-160 0-200 GLSS-200 316 stainless steel bourdon tube 0-300 GLSS-300 0-400 GLSS-400 316 series stainless steel movement with 0-600 GLSS-600 stainless steel internals 0-1000 GLSS-1000 0-1500 GLSS-1500 Glycerin filled 0-2000 GLSS-2000 0-3000 GLSS-3000 Ambient temperature range 0-5000 GLSS-5000 0 to + 150 F Pg 72 888.692.7114 www.gulfrubberco.com
VALVES AND GAUGES GAUGES Stainless steel gauges provide the corrosion resistance and the durability of a permanently sealed gauge. 2-1/2 FACE LIQUID FILLED PSI PART # 0-15 GLSSB-15 316 series stainless steel solid back 0-30 GLSSB-30 case with Polycarbonate window 0-60 GLSSB-60 0-100 GLSSB-100 ¼ back mount stainless steel connector 0-160 GLSSB-160 0-200 GLSSB-200 316 stainless steel bourdon tube 0-300 GLSSB-300 0-400 GLSSB-400 316 series stainless steel movement with 0-600 GLSSB-600 stainless steel internals 0-1000 GLSSB-1000 0-1500 GLSSB-1500 Glycerin filled 0-2000 GLSSB-2000 0-3000 GLSSB-3000 Ambient temperature range 0-5000 GLSSB-5000 0 to + 150 F 1120 McDaniel Houston, Texas 77022 Pg 73
VALVES AND GAUGES GAUGES Stainless steel gauges provide the corrosion resistance and the durability of a permanently sealed gauge. 4 FACE DRY GAUGE PSI PART # 0-15 GSS4-15 316 series stainless steel solid back 0-30 GSS4-30 case with Polycarbonate window 0-60 GSS4-60 0-100 GSS4-100 ¼ lower mount stainless steel connector 0-160 GSS4-160 0-200 GSS4-200 316 stainless steel bourdon tube 0-300 GSS4-300 0-400 GSS4-400 316 series stainless steel movement with 0-600 GSS4-600 stainless steel internals 0-1000 GSS4-1000 0-1500 GSS4-1500 ambient temperature range 0-2000 GSS4-2000 0 to + 150 F 0-3000 GSS4-3000 0-5000 GSS4-5000 4 FACE LIQUID FILLED PSI PART # 0-15 GLSS4-15 316 series stainless steel solid back 0-30 GLSS4-30 case with Polycarbonate window 0-60 GLSS4-60 0-100 GLSS4-100 ¼ lower mount stainless steel connector 0-160 GLSS4-160 0-200 GLSS4-200 316 stainless steel bourdon tube 0-300 GLSS4-300 0-400 GLSS4-400 316 series stainless steel movement with 0-600 GLSS4-600 stainless steel internals 0-1000 GLSS4-1000 0-1500 GLSS4-1500 Glycerin filled 0-2000 GLSS4-2000 0-3000 GLSS4-3000 Ambient temperature range 0-5000 GLSS4-5000 0 to + 150 F Pg 74 888.692.7114 www.gulfrubberco.com
INDUSTRIAL GLASS 1120 McDaniel Houston, Texas 77022 Pg 75
INDUSTRIAL GLASS Pg 76 888.692.7114 www.gulfrubberco.com
INDUSTRIAL GLASS 1120 McDaniel Houston, Texas 77022 Pg 77
GENERAL INFORMATION RUBBER ELASTOMERS Pg 78 888.692.7114 www.gulfrubberco.com
GENERAL INFORMATION 1120 McDaniel Houston, Texas 77022 Pg 79
GENERAL INFORMATION Pg 80 888.692.7114 www.gulfrubberco.com
GENERAL INFORMATION 1120 McDaniel Houston, Texas 77022 Pg 81
GENERAL INFORMATION Pg 82 888.692.7114 www.gulfrubberco.com
GENERAL INFORMATION 1120 McDaniel Houston, Texas 77022 Pg 83
GENERAL INFORMATION Pg 84 888.692.7114 www.gulfrubberco.com
GENERAL INFORMATION 1120 McDaniel Houston, Texas 77022 Pg 85
GLOSSARY OF TERMS ABRASION---PROGRESSIVE WARING AWAY OF MATERIAL. ABRASION RESISTANCE---ABILITY OF RUBBER COMPOUND TO RESIST MECHANICAL WEAR. AMBIENT TEMPERATURE---ENVIRONMENT TEMPERATURE SURROUNDING THE OBJECT UNDER CONSIDERATION. BACK-UP RING---WASHER-LIKE DEVICE INSTALLED NEXT TO AN ORING TO PREVENT EXTRUSION. COLD FLOW---CONTINUED DEFORMATION UNDER STRESS. COMPRESSION SET---DECREASE IN THICKNESS OF A RUBBER SPECIMEN WHICH HAS BEEN DEFORMED UNDER SPECIFIC CONDITIONS OF LOAD, TIME AND TEMPERATURE. CROSS SECTION---ORING AS VIEWED IF CUT AT A RIGHT ANGLE TO THE AXIS SHOWING INTERNAL STRUCTURE. CURING DATE---ORING MOLDING DATE. DUROMETER---INSTRUMENT USED FOR MEASURING THE HARDNESS OF RUBBER. DYNAMIC---ORING APPLICATION IN WHICH THE ORING IS SUBJECT TO MOVEMENT OR MOVING PARTS. DYNAMIC SEAL---SEAL REQUIRED TO PREVENT LEAKAGE PAST PARTS WHICH ARE IN RELATIVE MOTION. ELASTOMER---GENERAL TERM FOR ELASTIC, RUBBER-LIKE SUBSTANCES. ELONGATION---INCREASE IN LENGTH EXPRESSED NUMERICALLY AS A FRACTION OR PERCENTAGE OF INITIAL LENGTH. Pg 86 888.692.7114 www.gulfrubberco.com
GLOSSARY OF TERMS EXTRUSION---DISTORTION, UNDER PRESSURE, OF PROTION OF SEAL INTO CLEARANCE BETWEEN MATING METAL PARTS. FRICTION---RESISTANCE TO MOTION DUE TO THE CONTACT OF SURFACES. GLAND---SEAL ASSEMBLY, INCLUDING ORING, GROOVE WHICH HOLDS THE ORING AND CONTACTING SURFACES. NOMINAL LENGTH---DESIRED LENGTH FROM WHICH TOLERANCES ARE SET. OIL SWELL---CHANGE IN VOLUME OF A RUBBER ARTICLE DUE TO ABSORPTION OF OIL. SEAL---ANY DEVICE USED TO PREVENT THE PASSAGE OF A GAS OR LIQUID. SHAFT---ROTATING MEMBER WITHIN CYLINDER; NOT IN CONTACT WITH WALLS. SIZE, ACTUAL---ACTUAL DIMENSIONS OF THE ORING, INCLUDING TOLERANCE LIMITS. SIZE,NOMINAL---APPROXIMATE SIZE OF ORING IN FRACTIONAL DIMENSIONS. SQUEEZE---CROSS SECTION DIAMETRAL COMPRESSION OF ORING BETWEEN BOTTOM SURFACE OF THE GROOVE AND SURFACE OF OTHER MATING METAL PART IN THE GLAND ASSEMBLY. STATIC---STATIONARY APPLICATION SUCH AS A GASKET. STATIC SEAL---SEAL DESIGNED TO WORK BETWE4EN PARTS HAVING NO NO RELATIVE MOTION. SWELL---INCREASED VOLUME OF UNIT CAUSED BY IMMERSION IN FLUID. TENSILE STRENGTH---FORCE IN POUNDS PER SQUARE INCH REQUIRED TO CAUSE THE RUPTURE OF A SPECIMEN OF A RUBBER MATERIAL. VULCANIZATION---A THERMO-SETTING INVOLVING THE USE OF HEAT AND PRESSURE AND WHICH RESULTS IN GREATLY INCREASED STRENGTH AND ELASTICITY OF RUBBER-LIKE MATERIALS. 1120 McDaniel Houston, Texas 77022 Pg 87