Efficient QuickJet and Systems are designed to save time in the cleaning and replacement of plugged or worn spray tips. Key feature overview for QuickJet Systems: Reduce maintenance downtime and costs with fast, easy and accurate change-out of spray tips. True versatility for any application with a wide variety of body types/sizes, materials, spray patterns, angles and accessories. Easy and accurate assembly. Feature easy-grip spray tips and integral seals to prevent accidental misplacement. For QuickJet tips, see section B, Full Cone s, section C, Flat s and section D, Hollow Cone s. Key feature overview for Systems: Quick and easy spray tip replacement. Reduces costs because individual spray tips can be replaced without replacing the entire nozzle body. For tips, see section B, Full Cone s, section C, Flat s, section D, Hollow Cone Spray Nozzles and section E, Fine s. QuickJet Female body Female body Male body Male body Spray tip with seal Spray tip Tip retainer L2
Key feature overview for standard QuickJet nozzle bodies: Threaded QuickJet bodies readily adapt to most manifold and header installations. QuickJet spray tips available in wide range of capacities for flat, hollow cone and full cone patterns. Spray tips are precision machined for flow rate and spray pattern accuracy. Each spray tip s integral seal (either Viton or Buna-N) ensures positive fit between tip and body. Key feature overview for ProMax QuickJet nozzle bodies: Molded with engineering grade polypropylene. Durability with chemical resistance. Unique locking system. Spray tip can be inserted by hand and locked into correct alignment automatically. Tips include an integral Viton O-ring seal. Optional external O-ring protects nozzle against contaminants in harsh environments. Spray tips are available in flat or full cone spray patterns and are color-coded for flow rate identification. Key feature overview for QuickJet adjustable ball fitting bodies: Easy positioning of QuickJet spray tips within a 50 included angle of adjustment. Locking screws maintain nozzle position even when jarred or subjected to vibration. Standard QuickJet Bodies ProMax QuickJet Bodies Key feature overview for QuickJet split-eyelet bodies: Quick and easy mounting to manifold or header. Leak-proof seal provided by Buna-N gasket material. Available in brass or 303 Stainless Steel to fit pipe sizes from 0.75" to 2". QuickJet body, clamps, bolts and gasket included. Key feature overview for Kynar QuickJet nozzle bodies: Kynar PVDF thermoplastic nozzles are FDA compliant. Adapt to most manifold and header installations. Kynar spray tips specifically matched to nozzle bodies and are available in flat and full cone spray patterns. Positive spray tip fit with standard EPDM rubber or optional Viton seals. Each spray tip is matched to the nozzle body for quick installation and automatic alignment. Key feature overview for QuickJet and ProMax nozzle system plugs: The QuickJet plug tip can be used to conveniently shut off individual nozzles Key feature overview for nozzle system adapter for QuickJet systems: The adapter converts spray tips to the QuickJet System. The adapter accommodates both the threaded cap that holds the tip, as well as strainers, check valves, fittings and other options. QuickJet Adjustable Ball Fitting Bodies QJJS, QJJA, QJJLA male bodies QJA, QJLA female bodies 1/8" to 1/2" NPT or BSPT QuickJet Split-Eyelet Bodies QPPA male bodies 1/8" to 3/8" NPT or BSPT Kynar QuickJet Bodies QJA male bodies 1/4" to 1/2" NPT or BSPT QJASE bodies 3/4" to 2" clamp size QQ male bodies 1/8" to 3/8" NPT or BSPT L3
s s QJA QJLA QJJS QJJA QJJLA QPPA QJASE QQ Brass (none) 303 Stainless Steel SS 316 Stainless Steel 316SS l* l ProMax (none) l Kynar KY l *QJA female body only. F Standard M QJA QJLA QJJS QJJA QJJLA QPPA QJA QQ QJASE To Clamp On Tubing O.D. in. (mm) 3/4 QJASE 1 to 1-1/16 3/4 QJASE-SS (25 to 27)* 1 QJASE 1-1/8 to 1-3/8 1 QJASE-SS (32 to 35)* 1-1/4 QJASE 1-9/16 to 1-11/16 1-1/4 QJASE-SS (39 to 43)* 1-1/2 QJASE 1-3/4 to 2 1-1/2 QJASE-SS (44 to 51) 2 QJASE 2-1/8 to 2-3/8 2 QJASE-SS (54 to 60) *1/2" (12.7 mm) drill hole. 11/16" (17.5 mm) drill hole. Pipe Size 3/4* 1* 1-1/4 1-1/2 2 1/8 l l 1/4 3/8 l 1/2 l l QuickJet Complete Nozzle Nozzle 1/4 QJJA SS + QuickJet Adjustable Ball Fitting QuickJet Complete Nozzle Nozzle 1/4 x QJA SS + QuickJet BSPT connections require the addition of a B prior to the inlet connection. L4
QuickJet and ProMax Nozzle System Plugs s QuickJet Plug Brass (none) l l 303 Stainless Steel ProMax QuickJet Plug QJA QJLA QPA SS l l ProMax (none) l QuickJet Plug QJAPLUG SS QPAPLUG QuickJet Plug ProMax Plug For standard bodies For ProMax bodies Nozzle System Adapter for QuickJet Systems s QJA Brass (none) l 303 Stainless Steel SS l Adapter QJA x 11/16 16 SS Adapter Outlet Outlet QJA 11/16-16 l For standard bodies L5
Key feature overview for standard nozzle bodies: Threaded bodies readily adapt to most manifold and header installations. spray tips available in wide range of capacities for flat, hollow and full cone patterns. Spray tips are precision machined for flow rate and spray pattern accuracy. Key feature overview for split-eyelet bodies: Quick, easy and economical way to mount nozzles on pipe or tubing. No cutting, threading or brazing assures positive leak-proof seal and cost savings. Precision connector bodies are machined from solid bar stock in brass or 303 Stainless Steel to fit pipe sizes from 0.50" to 1". Design of body inlet retards entry of sediment to minimize clogging and maintenance costs. Designed for pressures up to 250 psi (17 bar) with flow rates up to 3 gpm (11.4 l/min)., clamps, bolts and gasket included. Key feature overview for plug valve nozzle bodies: Versatile in-line plug with sturdy brass body and one-piece Celcon plug/handle. Positive, quick and easy shut-off operation. Maximum operating pressure 400 psi (28 bar). Key feature overview for rollover nozzle bodies: Ideal for systems that need frequent cleaning, or where two different spray patterns may be used. Permits quick switch-over between two nozzles. Key feature overview for ball valve nozzle bodies: Positive on/off control for individual nozzles. Sturdy brass body with stainless steel ball to operate at pressures up to 400 psi (28 bar). Standard Split-Eyelet Bodies Plug Valve 1/8" to 1/2" NPT or BSPT (M or F) inlet connection 11/16"-16 (M) outlet connection 7421 1/2" to 1" clamp size 23220 1/4" NPT or BSPT (M or F) Rollover Ball Valve 23830 1/4" NPT or BSPT (M or F) 11/16"-16 (F) inlet connection 11/16"-16 (M) outlet connection 20900 1/4" NPT or BSPT (M or F) inlet connection 11/16"-16 (M) outlet connection L6
s 1/8 1/4 3/8 1/2 Standard Nozzle with Tip Retainer F M Standard Nozzle Only F M 1/8T 1/8TT CP1335 CP1336 1/8T-SS 1/8TT-SS CP1335-SS CP1336-SS 1/4T 1/4TT CP1321 CP1322 1/4T-NYB 1/4TT-NYB CP12094-NYB CP8028-NYB 1/4T-I 1/4TT-I CP1321-I CP1322-I 1/4T-SS 1/4TT-SS CP1321-SS CP1322-SS 3/8T 3/8TT CP1323 CP1324 3/8T-SS 3/8TT-SS CP1323-SS CP1324-SS 1/2T 1/2TT CP1339 CP1340 1/2T-SS 1/2TT-SS CP1339-SS CP1340-SS Nozzle * 7421-1/2T 7421-1/2T-SS 7421-3/4T 7421-3/4T-SS 7421-1T 7421-1T-SS To Clamp On Tubing O.D. in. (mm) 13/16 to 7/8 (20 to 22) 1 to 1-1/16 (25 to 27) 1-1/4 to 1-3/8 (32 to 35) Pipe Size 1/2 3/4 *Also available in stainless steel. 1 Complete Nozzle Nozzle 1/4 TT SS + Complete Nozzle Nozzle 7421 1/2 T SS + l Clamp Size Complete Nozzle Nozzle 23220 1/4F x T + Thread Complete Nozzle Nozzle 20900 1/4M x T + Thread BSPT connections require the addition of a B prior to the inlet connection. Diaphragm Check Valve Nozzle Valve Seat Maximum gpm (l/min) s 8360 Nylon SS 1/4" NPT or BSPT (M) 2 (7.6) T TT 7421 23220 23830 20900 Brass (none) 303 Stainless Steel SS Mild Steel I l l Nylon NYB l l 4664B Brass or Aluminum SS 1/8" NPT or BSPT (F) 1.5 (5.7) L7
Key feature overview for QJ17560-NYB nozzle assemblies: Drip-free ChemSaver shut-off requires 10 psi (0.7 bar) at nozzle to open check valve. Long-lasting EPDM rubber diaphragm with optional Viton available. Available to fit 0.50", 0.75" and 1" pipe. Maximum operating pressure is 300 psi (20 bar). Key feature overview for QJ7421 nozzle assemblies: Available to fit 0.50", 0.75" and 1" pipe. Maximum operating pressure is 300 psi (20 bar). Key feature overview for QJ1/4TT-NYB and QJ1/4T-NYB nozzle assemblies: Available with connections to fit NPT, BSPT (M) or NPT, BSPT (F). Maximum operating pressure is 300 psi (20 bar). QJ17560-NYB QJ7421-NYB QJ1/4TT-NYB QJ1/4T-NYB 1/2", 3/4" or 1" pipe 1/2", 3/4" or 1" pipe 1/4" NPT or BSPT (M) 1/4" NPT or BSPT (F) Nozzle Assembly To Clamp On Nozzle Assembly QJ17560A-1/2-NYB QJ17560A-3/4-NYB QJ17560A-1-NYB QJ17560A-NYB QJ17560A-NYB QJ7421-1/2-NYB QJ7421-3/4-NYB QJ7421-1-NYB 1/2" Pipe 3/4" Pipe 1" Pipe 20 mm Pipe 25 mm Pipe 1/2" Pipe 3/4" Pipe 1" Pipe QJ1/4TT-NYB 1/4 QJ1/4T-NYB 1/4 Complete Nozzle QJ17560 1/2 NYB + Pipe Size Complete Nozzle QJ 1/4 TT NYB + l (additional cap required)* *See your Sales Engineer for alternative caps available. BSPT connections require the addition of a B prior to the inlet connection. L8