GLOBAL WARNING WWW.HAZTEC.UK lightbar overview 2 january 2015 1 warning lights, work lights and ancillaries see separate brochure (1) 3 sirens, speakers & controls see separate brochure (3) 4 warning beacons see separate brochure (4)
lightbar overview The ideal design of a lightbar will depend on the application. In some cases a thin streamlined design is important. in other cases the need to incorporate siren / PA speakers is important, maybe facilities are needed to display additional information or perhaps cost is a high priority. To accommodate these varying requirements, Haztec offers many different lightbar ranges incorporating various light technologies from inexpensive Halogen rotators to high output strobes or the latest high output, long life low maintenance LED lightbar technology. Latest generation LEDs when correctly mounted and powered as part of a Haztec LED lightbar, offer a life of 50-60,000 hours. They can operate over a wide range of temperatures and are simple to control, allowing multiple flash patterns to be easily incorporated and synchronised if required. LED technology also offers silent operation with no moving parts to wear out. All lightbars are available in blue amber and red, with other colours available on request. Xpert SLE (see page 7) Compact low profile LED lightbar with an overall height of just 57mm. Can be supplied with integral siren & speaker and also with magnetic or permanent mount. Many different lighting configurations available including clear or coloured lenses. Can be configured with front only or rear only lighting. XP Minibar (see page 8) Compact minibar available with halogen, strobe or LED technology. Versions for magnetic or permanent mounting, choice of lens colours and options for integral alley lights etc. Can accommodate integral siren if required. Xpress Lightbars (see page 9) Highly versatile, able to accept numerous options including information sign displays and speakers. Available with LED strobe or rotator technology. Xtra (see page 10) Raised profile lightbar for use as either a single level lightbar with raised base to prevent obscuration or a dual level bar. Can incorporate infosign displays and speakers. Xtreme (see page 11) Dual level lightbars, for when extreme visibility is needed. This allows numerous combinations including rotating beacons with lower level strobes, scene lights or stop, tail turn lights. Can incorporate info sign displays and speakers. Xcess-P lightbars (see page 12) Ultra thin Xcess lightbars provide a thin streamlined solution using LED technology. Truly impressive 360 degree illumination. Xpert (see page 13) Similar to Xpert SL but with a greater height so suitable for a wider range of components such as 360 degree beacon modules as well as dual height rows of LED modules and speakers. Xpert DX (see page 14) Raised height version of Xpert designed to accommodate strobe or rotating halogen beacons, can also accommodate speakers if required. 2 Xpert SL (see page 15) High visibility, low profile LED lightbar designed specifically for latest LED technology. Only 57mm high and available with clear or coloured lenses. Wide choice of options and functions, including speaker if required.
lightbar optional equipment Light bars are normally designed to meet specific requirements and available in a wide range of lengths and colours, with various customisation opportunities. Some of the popular possibilities are shown below, but please contact our sales department to discuss availability of particular options on specific lightbar ranges. Haztec regularly produces customised or or even bespoke products, if the equipment you require is not shown please contact our sales team for further details. Alley Lights Mounted in the ends of lightbars allowing areas to the side of the vehicle to be illuminated, they are available with either halogen or LED lightsources. LED versions have a power consumption that is much lower than a halogen lamp and a working life of around 50,000 hours- many times longer than a halogen alternative. Scene / takedown lights Mounted on the front and or rear of the lightbar, they provide white light to illuminate a work scene. Can be programmed to also flash as part of the warning light sequence. Headlights Mounted on the front and or rear of the lightbar, they provide white light to illuminate a work scene. They typically incorporate an optical design that directs the light downwards. Info Signs LED dot matrix displays that provide fixed or scrolling messages / pictograms to warn and inform other traffic. Messages are pre-programmed and selected from a library of messages using a controller mounted in the vehicle. Centre signs Can often enhance the warning capability by providing advanced notification of the type of hazard about to be encountered. Centre signs can also be used to promote corporate branding. Can be illuminated with either low cost tungsten or low maintenance LED lighting. Speaker grille Many lightbars can accommodate the siren speaker. These can be supplied with speaker grilles, manufactured from polycarbonate or stainless steel. A range of speakers is available to suit different applications. LED Stop / Tail / Turn lights. Duplicates the stop, tail and turn lighting of the vehicle. Can be especially valuable on vehicles where the rear lighting could be obscured. Lens inserts Strobe & halogen lightsources generate white light. A coloured lens is then used to produce the desired warning colour. Lens inserts allow a dual colour output to be generated. With Modern LED technology, the LED s generate the required coloured light, allowing clear lenses to be used and avoiding the need for lens inserts Mirrors When beacons or other wide angle light sources are used, mirrors can dramatically enhance the output of the lightbar by re-directing otherwise wasted light. They can also emphasise the light in a particular direction. 3
lightbar illumination options The 3 basic lightbar illumination technologies are halogen, strobe and LED. Some lightbars are only compatible with LED technology others are compatible with multiple technologies, the final choice being to suit user preferences. Halogen or strobe lightbar illumination is provided by components that have been specifically designed to be mounted inside lightbars. If LED technology is preferred, there is a is a wide choice of fitted components. Some of these components are specifically designed for use inside lightbars only, but the majority are available either as components in lightbars or as stand alone beacons / directional warning units. Halogen Rotators Lowest cost solution Simple to maintain Typical lamp life 2,000 Hrs Lamp guarantee N/A 1 Year motor / rotator warranty Strobe Units Bright flash Variable flash patterns Typical lamp life 3,000 Hrs 3 month lamp warranty 1 or 3 Yr power pack warranty (version dependant) 360 o LED modules - Generation 3 50,000 Hr typical life High output Multiple flash patterns High / low brightness settings Low current consumption 5 Year warranty Silent operation with no moving parts to wear out 9-3541 - 360 degree LED module 9-3751 - 360 degree LED module 360 o LED modules - Generation 2 20,000 Hr typical life Low current consumption 1 Year warranty 4 Proflex - 360 degree LED module
lightbar illumination options - corner modules Each module provides 90 o coverage. 50,000 Hour typical life Single or dual row options output Corner LED modules - Generation 3 High output Low current consumption 5 Year warranty 10408 Corner module Single colour XE Corner module Dual colour uses colour change LEDs XD1 Corner module Dual colour uses colour change LEDs XD2 Corner module Dual row 1 Colour per row XED Corner module EC65 approved AS A DUAL COLOUR MODULE Class 2 approved in blue AND amber (same module) 1 XED module for each lightbar end 5 LED heads per XED module 5
lightbar illumination options - inner modules LED inner (directional) modules - Generation 3 Normally used in addition to corner modules 5 Year warranty 50,000 Hr typical life Single or dual row options High output Low current consumption 10406 Linear LED (3+3 LEDs) XE Inner module Dual colour uses colour change LEDs XD1 Focussed Dual colour uses colour change LEDs XD1 Wide Angle Dual colour uses colour change LEDs XD Wide Angle Single colour XD2 Focussed Dual row 1 Colour per row XD2 Wide Angle Dual row 1 Colour per row XD2 Combined Dual row 1 Colour per row XEM Single colour Combines LEDs with mirrors giving high output at a cost effective price 6
xpert sle compact led lightbar Magnetic or permanent mount Magnetic mount version is wind speed tested to 200kmh Latest slimline LED technology Option for front or rear illumination only Optional integral speaker and siren Overview Xpert SLE is a compact LED lightbar with a very wide range of configuration options. it can be supplied with either 2 or 4 corner modules giving either front / rear or full 360 degree coverage. In addition 1 or 2 LED inner modules can be added to both the front and rear of the bar if required. If a single LED inner module is added, this can be split to provide half and half flashing operation allowing symmetrical side to side flashing. Alternatively 2 x 360 degree LED modules can be fitted. Powerful 10W LED takedown lights can be fitted to the front of the bar, these can be set for flashing mode for extra visibility or can be set to steady operation for scene illumination. Choice of different flash controllers enabling functions such as front / rear switching to be included if required. Despite its small size Xpert SLE can also be fitted with an integral siren and speaker along with 4 x LED corner modules providing an all inclusive solution with 360 degree visibility, siren and speaker, this is ideal magnetic mount operation. Materials The lens and base is moulded in strong UV stabilised polycarbonate. Clear lens as standard, coloured lens on request. Mounting Can be ordered as a permanent mount version or as a magnetic mount version. The magnetic mount version is supplied with heavy duty rubber paintwork protectors to cover the magnets. An optional quick release safety strap is also available for added security. Magnetic mount versions are wind tested to 200kmh Approvals EC65 class 2 approved in blue, 360 degree beacon modules approved in blue and amber Lens colour LED colours Colour options available Clear, blue, amber or red Amber, blue, red or white Dimensions (mm) L - 492 (19 ) D - 240 H - 57 D H L Fitted Options Magnetic or permanent mount. Fitted speaker Fitted siren 10408, XE, XEM, XED & 3751 LED modules LED takedown lights Clear or coloured lenses See pages 3-6 for details of options 7
xp minibar Compact minibar Magnetic or permanent mount Wind tested magnetic versions available Overview XP is a compact minibar which can be configured with various choices of light source from inexpensive halogen, to latest generation LED. XP can be supplied with clear or coloured lenses and can also be configured as an illuminated sign. Materials Base and lens is moulded in strong UV stabilised polycarbonate. Configurations Available with Halogen, strobe or LED light sources, can be supplied with alley lights and / or integral siren if required. Choice of single colour or split lens, optional clear or coloured lens inserts. Mounting Available in permanent or magnetic mount versions, magnetic mount versions are supplied with 3M straight lead, switched plug, 4 x 40KG magnets & moulded rubber protective covers. Magnetic mount versions have been independently wind tested to 250km/h on an actual moving vehicle Approvals EC65 approved versions in blue and amber with strobe & rotator light sources. Lens colours Sign colours Lens Inserts Colour options available Amber, Blue, Clear, Red or Green White (Opal) or Yellow Amber, Red or Clear Dimensions (mm) L - 510 (20 ) D - 220 H - 93 H D L Fitted Options Halogen rotators Strobe Warning lights & beacons 10408, XD, XD1 & XD2, Proflex & 3541 LED modules LED or Halogen alley lights Siren / PA Speaker 8 See pages 3-6 for details of options
xpress lightbar Extremely versatile design Can accommodate infosign system Optional additional headlamp and sidelight units Overview Xpress is extremely versatile and can be configured in many different ways. Speakers can easily be incorporated for PA and siren functions. The speaker can be housed behind a dedicated speaker grille, or an illuminated centre sign can be fitted that incorporates a speaker mesh. Alternatively the centre section can be used to accommodate the Infosign LED message display system. Other options such as LED or Halogen alley / scene lights or external sidelight / headlamp units. can be added if required along with clear or coloured lens inserts. Xpress can also accommodate LED arrowbar direction systems or stop / tail / turn lights. Materials The base is manufactured from anodised extruded aluminium, lenses are moulded in strong UV stabilised polycarbonate. Mounting A comprehensive choice of mounting kits is available see page 15 for further details. To maintain ingress protection, mounting kits attach simply and securely to the base extrusion without the need for additional drilling Approvals EC65 approved in blue with LED light source and in blue and amber with Strobe &, Rotator light sources. Lens colours Sign colours LED colours Colour options available Amber, blue, red, or clear White (opal) or yellow Can be black if no sign required Amber, blue, green, red or white Dimensions (mm) L - 429-1908 (17-75 ) D - 292 H -103.5 H D L Fitted Options Halogen rotators Strobe Warning lights & beacons 10408, XD, XD1 & XD2, Proflex & 3541 LED modules Stop / Tail / Turn lights LED or Halogen scene lights LED or Halogen alley lights Illuminated centre sign Siren / PA Speaker Infosign system See pages 3-6 for more details of fitted options 9
xtra lightbar Extremely versatile design Can accommodate infosign system Optional additional headlamp & sidelight units Raised profile to avoid obscuration Can include lower level lighting modules Overview The Xtra lightbar features a substantially raised base. This is designed to help avoid obscuration of the lightbar output when mounted on a high vehicle and viewed from a low level. In addition, the raised base also provides a facility for the mounting of additional lighting equipment beneath the main lens area without diminishing or obstructing the primary warning lights. As well as warning lights, the upper level of Xtra can also accommodate the Infosign programmable sign system. Solid internal dividers are used with lightbars incorporating signs to avoid light intrusion. When lightbars have a full lens configuration, clear dividers are used to maximise the effect of mirrors whilst providing excellent rigidity and security. Materials The base is manufactured from heavy duty anodised extruded aluminium, lenses are moulded in strong UV stabilised polycarbonate. Mounting A comprehensive choice of mounting kits is available see page 15 for further details. To maintain ingress protection, mounting kits attach simply and securely to the base extrusion without the need for additional drilling Approvals EC65 approved blue and amber with Strobe & Rotator light sources. Colour options available Lens colours Amber, blue, clear, red or green Centre lenses Amber, blue, clear, red or black Sign colours White (opal) or yellow Lens clamp colours Amber, blue, clear, red or black LED colours Amber, blue, green, red or white Dimensions (mm) L - 576-2544 (23-100 ) D - 292 H - 156 10 Fitted Options Halogen rotators Strobe Warning lights & beacons 10408, XD, XD1 & XD2, Proflex & 3541 LED modules Stop / Tail / Turn lights LED or Halogen scene lights LED or Halogen alley lights Illuminated centre sign Siren / PA Speaker Infosign system Halogen headlight & sidelight units D L H2 H1 See page 3-6 for more details of fitted options
xtreme lightbar Extremely versatile design Double tier lighting equipment Lower level lighting does not obstruct primary warning Can accommodate infosign system Optional additional headlamp & sidelight units Overview Xtreme is a dual layer lightbar to satisfy the most demanding lightbar requirements. The upper tier is designed to accommodate strobe or halogen primary lights, whilst the lower level accommodates Halogen, LED or strobe lights. Lower level modules operate without diminishing or obstructing the primary warning lights. Blank lenses can be fitted instead of lighting modules if required in some or all positions. Lower level options include large flood, spot or wide beam alley lights. In addition to warning lights the upper level of Xtra lightbars can also accommodate the infosign programmable sign system. Xtreme Lightbars can be supplied complete lightbars or as shell only, for fitting with equipment by others. Materials Base manufactured from heavy duty anodised extruded aluminium, lenses are moulded in UV stabilised polycarbonate. Configurations The potential combination of top and lower level lighting equipment allows a vast range of possible configurations to be achieved. Please contact us for a quotation based on your specific requirement or to enable a member our technical sales team to explain the available configuration possibilities. Mounting A comprehensive choice of mounting kits is available see page 15 for further details. To maintain ingress protection, mounting kits attach simply and securely to the base extrusion without the need for additional drilling Lens colours Sign colours LED colours Colour options available Amber, blue, clear, red or green White (opal) or yellow Can be black if no sign required Amber, blue, green, red or white Dimensions (mm) L - 576-2544 (23-100 ) D - 296 H - 156 L H Fitted Options Halogen rotators Strobe Warning lights & beacons 10408, XD, XD1 & XD2, Proflex & 3541 LED modules Stop / Tail / Turn lights LED or Halogen scene lights LED or Halogen alley lights Illuminated centre sign Siren / PA Speaker Infosign system See page 3-6 for more details of fitted options D 11
xcess-p led lightbar Ultra thin design Optional night / day level settings Latest LED technology Optional dual colour LED modules Integral arrow bar option Cruise Mode Overview Xcess-P sets the standard for LED lightbars. The slimline design minimises the impact on vehicle aerodynamics, but not at the expense of visibility, latest LED technology offers outstanding brightness with low current consumption. Cleverly designed corner modules provide true 360 o visibility with 12 high power LEDs in each module. In addition to the corner modules, each Lightbar contains a number of directional modules to the front and rear, these modules which can have either clear or coloured lenses can incorporate LED directional warning lights or scene / takedown lights In addition to any front / rear units, LED alley lights can be incorporated at the side of the lightbar. Many different module combinations can be provided, and this coupled with highly advanced programming capabilities offering functions such as day night light levels, cruise mode and multiple programmable flash patterns, enables Xcess-P to be configured to meet exact requirements. LED modules are designed specifically for use with Xcess-P and can be supplied as single or dual colour types. Where dual colour LED modules are used, many different switching patterns can be achieved including blue warning patterns with additional amber arrowbar functionality. Selectable options include separate switching of front / rear corner and inner LED modules, as well as cruise mode on corner or inner modules, plus arrow / warning functions on inner modules. Xcess-P can be interfaced directly with the Haztec Eurosmart controllers, or alternatively a breakout unit is available to allow user supplied switches to be used to control required functions. Materials The shell is manufactured from anodised extruded aluminium, lenses are moulded in strong UV stabilised polycarbonate. Fixing Various mounting kits are available in including moulded rubber, adjustable permanent mounts, and hook kits. See page 15 for more details. Approvals EC65 approved in blue and amber versions. Lens colours Sign colours LED colours (dual colour modules) LED colours (single colour modules) Colour options available Amber, blue, clear or red White (opal) or yellow Amber / white, amber / red, amber / blue, amber / green / blue / red, blue / green Amber, blue, red, white or green Dimensions (mm) L - 915-1676 (36-66 ) D - 135 H - 70 D L H 12 Fitted Options Illuminated centre sign. Xcess Inner and corner modules LED alley lights LED take down lights See page 3-6 for more details of fitted options
xpert lightbar Extremely versatile design Low profile Integral speaker options High visibility lens design Overview The new Xpert Lightbar range offers excellent quality with extreme versatility at a competitive price. With an overall height of just 79mm, Xpert offers an optimum combination of slim aerodynamic design coupled with a large light emitting area to maximise safety. It is ideally suited to the latest long life, low maintenance LED modules, It is also available with linear strobe light sources. Xpert has been designed to be accommodate either single or dual height rows of Haztec 10406 / 10403 & 10408 LED modules. 10408 modules are mounted at the corners of the lightbar, whereas 10406 & 10403 modules are mounted at the front or rear of the light bar. 10406 modules have 6 LEDs, these can be single colour or dual colour (3+3). Xpert incorporates a strong, rigid extruded aluminium base along with a sleek curved end design and is available in an extensive choice of lengths, with custom lengths also available to order. A wide selection of lens, lens clamp and centre piece colours and sizes, is available (see below.) Speakers can easily be incorporated for PA and siren functions. Other options such as LED or Halogen alley / scene lights, as well as clear or coloured lens inserts can also be added if required. Materials The base is manufactured from anodised extruded aluminium, lenses are moulded in strong UV stabilised polycarbonate. Mounting A comprehensive choice of mounting kits is available see page 15 for further details. To maintain ingress protection, mounting kits attach simply and securely to the base extrusion without the need for additional drilling Approvals EC65 approved in blue and amber versions. Lens colours Sign colours LED colours Colour options available Amber, blue, clear, green or red White (opal) or yellow. Can be black if no sign required Amber, blue, green, red or white Available as either single colour or dual colour modules. Dimensions (mm) L - 429-1908 (17-75 ) D - 292 H - 79 D H L Fitted Options Strobe Warning lights 10408, XD, XD1 & XD2 & 3541 LED modules Stop / Tail / Turn lights LED or Halogen scene lights LED or Halogen alley lights Illuminated centre sign Siren / PA Speaker 13 See page 3-6 for more details of fitted options
xpert dx lightbar Extremely versatile design Raised base profile Integral speaker options High visibility lens design Overview Xpert DX shares a common design theme with the Xpert lightbar, but has a raised base profile making it ideal for use with halogen rotator light sources as well as 360 0 strobes. The same options that are offered with Xpert are also available with Xpert DX, allowing the same options for lengths, lens colours etc. Speakers can easily be incorporated for PA and siren functions. Other options such as LED or Halogen alley / scene lights, as well as clear or coloured lens inserts can also be added if required. Materials The base is manufactured from anodised extruded aluminium, lenses are moulded in strong UV stabilised polycarbonate. Mounting A comprehensive choice of mounting kits is available see page 15 for further details. To maintain ingress protection, mounting kits attach simply and securely to the base extrusion without the need for additional drilling Approvals EC65 approved in blue and amber versions. Lens colours Sign colours LED colours Colour options available Amber, blue, clear, green or red White (opal) or yellow Can be black if no sign required Amber, blue, green, red or white Dimensions (mm) L - 429-1908 (17-75 ) D - 292 H - 99 Fitted Options Halogen rotators Strobe Warning lights & beacons 10408, XD, XD1 & XD2, Proflex & 3541 LED modules Stop / Tail / Turn lights LED or Halogen scene lights LED or Halogen alley lights Illuminated centre sign Siren / PA Speaker Infosign system L D H 14 See page 3-6 for more details of fitted options
xpert-sl slimline led lightbar Just 57mm high Optional night / day level settings Independent front / rear switching option Optional dual colour LED modules Integral arrow bar option Cruise Mode Overview Xpert SL is just 57 mm high, and is purpose designed to neatly accommodate the latest Haztec LED technology, providing a high output, high visibility LED lightbar with a very streamlined profile. Xpert SL is available with many different lighting options including the XE high output corner and inner modules as well as low profile 360 degree beacon modules Lenses can be supplied in either clear or coloured material, Centre sections can have transparent lenses and contain additional inner lighting modules or can be opaque with or without illuminated signs (to suit customer preference). Latest generation flash controllers support sophisticated flash pattern requirements they also offer functions such as cruise mode, dimming mode to reduce output under low light conditions and arrowbar modes. Materials The base is manufactured from anodised extruded aluminium, lenses are moulded in strong UV stabilised polycarbonate. Fixing Various mounting kits are available in including moulded rubber, adjustable permanent mounts and hook kits. To maintain ingress protection, mounting kits attach simply and securely to the base extrusion without the need for additional drilling See page 15 for more details. Approvals EC65 approved in blue, amber and red versions. Lens colours Sign colours LED colours (single colour modules) Colour options available Amber, blue, clear or red White (opal) Amber, blue, red, white or green Also available as dual colour modules. Dimensions (mm) L - 429-1708 (17-75 ) D - 292 H - 57 D H L Fitted Options Illuminated centre sign. 10408, XE, XEM XED & 3751 LED modules LED or halogen alley lights LED or halogen take down lights Arrowbar functions Day / Night and cruise mode Gatso light See page 3-6 for more details of fitted options 15
lightbar mounting kits 9-000DK 45mmH Moulded permanent mount kit secured to vehicle and lightbar via concealed fixing bolts for neat appearance. Supplied as a pair of brackets 95-LPK Low profile mount kit for xcess and Xcess-P. attaches to underside of lightbar with secure bolt fixing to vehicle roof. 95-XHK permanent mounting kit designed specifically for use with Xcess and Xcess-P lightbars. Attaches to underside of lightbar extrusion via simple but secure coachbolt fixings. Mounting feet have adjustable angle to suit different vehicles. 9-286LK levelling kit Levelling assembly to work in conjunction with various Haztec lightbar mount kits allowing the lightbar to be angled to compensate for sloping vehicle roofs. Allows a mounting angle adjustment of up to 12 degrees up or down. Supplied as a kit of 2 brackets with all necessary fixing bolts, shown below with 9-000SBK mount (mount kit is ordered separately) 9-000-SOK levelling kit Kit of 4 brackets designed to clamp onto a variety of modern profile roof rails. Rail mounting bolts slide into lightbar extrusion and when tightened secure the clamp against the rail. 16
lightbar mounting kits Lightbar mounting kits perform the vital task of securing the lightbar to the vehicle body. Xpert, Xpert DX, Xpert SL, Xtreme,Xtra, XH50 and Xpress lightbars have a continuous channel in the underside of the extruded base. The mounting bolts are free to slide along the length of this channel whilst being securely retained in the lightbar extrusion allowing them to be moved to align with the fixing holes. Haztec offers a wide range range of lightbar mount kits allowing different fixing possibilities to suit particular applications. 9-000BK / 9-000XPBK A simple permanent mount kit consisting of 4 x 20mmH heavy duty rubber spacing adaptors that mount between the vehicle and the bar. Kit is supplied with mounting bolts that fix through the centre of the spacing adaptor. 9-000SBK / 95-SBK Heavy duty solid moulded rubber mounting kit consisting of 2 x 41mmH rubber mounts and 4 mounting bolts. Mounting bolt heads are inserted into the lightbar base extrusion and bolted to the vehicle. slotted holes in mounts assit with simple alignment with fixing holes. 9-000HK Stainless steel hook on mounting kit - avoids the need to drill mounting holes in the vehicle. Consists of a Z bracket that fixes to the lightbar and two separate clamps to fix against the door aperture. clamps and Z brackets are are held together by a bolt and locknut (supplied) Z bracket supports the lightbar weight against the roof, whilst the clamps secure the lightbar in position. 9-000PK Permanent mount heavy duty stainless steel mounting kit. Raises lightbar profile by 65mm to help prevent obscuration. Fixes to vehicles via 2 bolts on each bracket, kit includes substantial protective rubber spacer to prevent direct bracket contact with vehicle finish and to stop lightbar from sliding under wind pressure 9-000HPK Permanent mount high rise stainless steel mounting kit. Raises lightbar profile by 130mm to help prevent obscuration. Fixes vehicle via 2 bolts, kit includes protective rubber strip to prevent direct contact with vehicle finish. 9-000RK permanent mount roof rail fixing kit. consists of 4 metal brackets each supplied with 2 heavy duty coachbolts and locknuts. Designed to secure the lightbar to roof rails (roof rail fixings not included) Coachbolt head inserts into lightbar extrusion base and slides along full length for ease of fixing. 17
roof mount connector Rugged weatherproof connector Quick release locking mechanism Right angled socket to minimise height requirements The 9-0008 & 9-0012 weatherproof right angled connectors are ideally suited for use on vehicles to provide a simple means of powering equipment that may need to be removed. The connector consists of a low profile right angled fixed socket - ideal for mounting on a vehicle and a male plug designed to be fitted to a wiring loom. 2 versions are available, an 8 pin and an 12 pin. All pins in both versions are rated at 10A / 12V or 24V DC with a maximum cable size of 1.5mm. A locking mechanism is included to ensure both parts remain securely joined when in operation but can be easily separated without the need for any tools when required. Normally both parts of the connector are supplied pre-fitted, to the wiring loom, it is therefore necessary to specify the required wire length between the lightbar and the loose part of the connector. (see diagram) As an alternative, special versions of the 8 Pin type can be supplied as separate loose items. This version allows the installer to cut the loom at the desired point and then fit the connector. These special versions utilise push lock terminations allowing the user to fit the connector without needing any specialist tools. A gasket is provided to help seal between the right angled socket and the vehicle. Because of the 1.5mm cable / 10A max limit per pin, In some cases it will be necessary to supply a special loom with multiple negative wires and this should be considered when calculating the required number of pins. Please discuss with technical sales if required. 18 Dimensions (mm): Socket: 55L x 40H x 40D Plug: 55L x 25H x 25D Order code Description 9-0008 8 Pin Quick release connector pre-fitted to lightbar loom 10A max per pin. 9-0008-PL 8 Pin Quick release connector with push lock wire connections (supplied loose for customer fitting. 9-0012 12 Pin Quick release connector pre-fitted to lightbar loom. 9-00-MP Blank plug to protect socket from ingress during maintenance etc. Please specify this length when ordering non push lock versions
WWW.HAZTEC.UK Haztec International Limited Moorfield Estate, Leeds LS19 7BN, England T: +44 (0)113 202 9115 F: +44 (0)113 202 9158 E mail: info@haztec.uk - www.haztec.uk V5.5