9500 4WD Series
MAHINDRA 9500 4wd (92HP) TRACTORS TOUGH AND RELAIABLE MOST POWERFUL TRACTOR IN ITS CATEGORY
INTRODUCTION The 9500-4WD series tractors are ideal for : Primary and secondary tillage Livestock operations Crop protection Haulage, loader applications and other basic field operations At the Heart of 9500 4WD, is a HIGHLY TORQUEY Turbocharged Engine. Translating this High Engine output into performance, is the 12 speed rugged transmission, while the Heavy Duty Cast Iron Chassis (Tractor weight 3240 kgs) and the High Capacity Axle confirm that the whole equipment package can Push more, Pull More and Haul more.
TORQUEY & Fuel Efficient Engine The 9500 4WD is powered by a turbo charged 4 cylinder Direct Injection, Diesel Engine. They offer an unmatched combination of performance, reliability and fuel efficiency. They are designed to ensure a flat torque curve and maximized torque levels, as high as 326 Nm, ensuring maximum productivity in both PTO and draft applications.
TORQUEY & FUEL EFFICIENT ENGINE The modern design employed allows: Higher Fuel Efficiency, achieved by: Optimizing combustion - Re-entrant type pistons, higher combustion ratio Lower rated rpm. Longer Engine Life: achieved by: A rugged ribbed crank case with Cast Iron parts like Oil Pump, Valve Housing Cover Efficient lubrication and cooling system- Piston cooling Jets Lower rated rpm
More Air intake for more power Engine is equipped with a bigger 8 inch air cleaner. This helps with a higher air intake necessary for developing higher Power. The dry type air cleaner is located for an ease of maintenance..
ON THE GO SHIFT The dedicated left-hand synchronized reverser provides smooth control for maximum productivity during intense loader and headland operations STANDARD SHUTTLE The synchromesh transmission provides smooth shifting on the move. The Standard 12F + 12R speeds maximize performance with a choice of speeds
ON THE GO SHIFT SYNCHRO SPEED SHIFT 3 RANGES OFFERING MORE SPEEDS The transmission is pressure lubricated Has a dedicated pump inside the transmission to offer excellent durability
HEAVY DUTY AXLES Differential Lock: The tractor comes standard with the rear differential lock, to help to pull out the tractor in wet and muddy conditions. On engaging the differential lock, it allows power to be applied equally to both ththe rear wheels
HEAVY DUTY AXLES INBOARD ERICYCLIC PLANETARY The rear axle has large oil-cooled l disc brakes and heavy-duty inboard epicyclic reduction units for strength, safety and reliability. The other advantage of Planetary reduction are: High load carrying capacity Improved efficiency Greater resistance to shock Improved lubrication
HIGH CAPACITY FRONT AXLE; EFFORTLESSLY STEERED INLINE FRONT AXLE WITH LSD Limited slip differential automatically compensates for traction difference between front tires. The front axle with a limited i slip differential provides additional pulling power in tough soil conditions. The epicyclical reduction offers high dynamic load carrying capacity and is designed for maximum performance in loader and field operations. The responsive hydrostatic steering has a tight steering angle, for effortless maneuvering even in confined areas
Arrangement for front ballast The front axle support with provision of 47 Kg each front ballast weights reduced front tyre slippage & front end lifting in haulage.
LONG LIFE CLUTCH; INDEPENDENT PTO The low effort dual clutch is a simple reliable unit designed for smooth engagements. The large diameter cerametallic friction discs (12 ) provide long lasting performance and ample surface area to transfer power effectively. The dual clutch includes both the transmission traction clutch and PTO clutch in one pack. The traction ti clutch is foot operated while the PTO clutch is operated independently of the transmission using a separate hand lever.
DEPENDABLE HYDRAULICS, STURDY LINKAGES A tandem-gear pump supplies power to the hydraulic system. This pump is basically two pumps working together as one to provide a high flows: The Rear half of pump delivers 19LPM hydraulic flow to the steering circuit. The Front half of pump supplies 42LPM of hydraulic flow to the Auxiliary Valve and 3- point hitch h functions. This high flow rate, combined with the system s high hpressure, provides excellent hydraulic performance and a lift capacity of 2500 kgs.. Also it ensures easy power steering with heavy loads on the front of the tractor. One remote hydraulics valve is standard with an option to have another valve. Sturdy 3-point linkage is employed to adapt to a variety of implements. Both the lift rods are adjustable that allow easy implement hook up.
PLENTY OF LEG ROOM. The side-shift gear controls and suspended brake and clutch pedals provide added d leg room and a roomy platform. SUSPENDED PEDALS The uncluttered operator platform makes for easy entry and exit. SIDESHIFT GEAR CONTROLS
Now Compare the MAHINDRA 9500 4WD for. Synchro-shuttle transmission Engine maximum torque Number of transmission speeds and full synchromesh gear shift (12F-12R) Lift capacity of 2500 Kg Overall tractor weight (3240Kg)
ENGINE TYPE MODEL 9500 4WD Series 9500 4WD Four stroke, Direct injection, Inline pump, Water cooled Diesel Engine. NO. OF CYLINDERS 4 SWEPT VOLUME (CC) 3533 MAX ENGINE HP @ RPM 92 HP @ 2300 TRANSMISSION TYPE Speed section full Synchromesh, Range section full Constant mesh, Shuttle section Synchro mesh & Differential Lock NO. OF GEARS 12 - Forward, 12 Reverse CLUTCH TYPE Dual Clutch BRAKES TYPE HYDRAULIC SYSTEM & LINKAGES TYPE Oil immersed brakes. Open centre full live Hydraulics with Position and Draft controls with isolator valve (common oil for hydraulics + transmission) MAX. LIFTING CAPACITY (Kg) 2500 3 POINT LINKAGE Category 2 with Telescopic Adjustable Stabilizer.. AUXILLARY REMOTE VALVE Two spool Standard auxiliary valve STEERING TYPE Hydrostatic Power Steering POWER TAKE OFF MAXIMUM PTO (HP) / TYPE 74 HP Max / Independent - Single Lever IPTO PTO RPM @ ENGINE SPEED 540 at 2187 OPERATING WEIGHT TOTAL WEIGHT (Kg) 3280 DIMENSIONS (MM) LENGTH OVERALL 4104 WIDTH OVERALL 2050 TURNING RADIUS WITH BRAKES MIN 3962 TYRES FRONT 12.4 x 24 REAR 18.4 x 30
INSTALLATION MENU
INSTALLATION MENU 8000 4WD
INSTALLATION MENU 8000 4WD
INSTALLATION MENU H2
INSTALLATION MENU H2
INSTALLATION MENU H3
INSTALLATION MENU H3
Moving Ahead. Accepting No Limits i Alternate Thinking Driving Positive Change