Oil and Gas - O&G Series ladder ccumulators High Pressure, 07 to 760 bar
Catalogue HY0-4004/UK rev. 0 escription esigned for high pressure hydraulic systems, the O&G bladder accumulator has been developed for the hazardous environments encountered within the Oil & Gas Industry and other aggressive environments. Carbon and stainless steel (up to 760 bar). Features/enefits xtensive range of international and industry approvals (P 04/68/U, N 459, TX, SM VIII div, SLO, CRN, S0, NR, CUTR, NV, V Marine, S and GL) Rigorous product testing and continuous product development The O&G bladder accumulator is specially designed and developed for the hazardous environments encountered within the Oil and Gas industry however it is also ideally suited for other highly demanding markets. They meet a wide range of approvals and are tailor made to meet your requirements (e.g. special coatings, IP-class and TX/x approvals). Utilizing comprehensive tools and resources including an applications database, C/CM, finite element analysis, reliability studies and simulation we have optimized the design and performance of the accumulator. Parker Olaer bladder accumulators are suitable for use in more than 5 countries (all hydraulic accumulators for urope are C marked) and they can meet an extensive range of international and industry approvals. Rigorous product testing and continuous product development help to ensure our hydraulic accumulators operate at optimum efficiency and can perform in the most demanding environments. Parker accumulator accessories such as Safety locks, urst iscs and Permanent Charging Sets, can aid the safe installation and operation of the accumulators in any hydraulic system. Parker Olaer have developed very sophisticated simulation software to optimize sizing recommendations for hydraulic accumulators. You can download the accumulator sizing software from www.parker.com/acde. Large selection of materials and fittings to suit every hydraulic system. Parker Olaer offers a wealth of product knowledge and experience thus enabling us to provide first class technical support and customer service. Markets Oil and Gas Industrial pplications TOPSI PPLICTIONS Intervention and Workover Control Systems (IWOCS) and Workover Control Systems (WOCS) Wellhead Control Panels (WHCP) Chemical Injection Skids Winch Systems Frames Heave Compensation avit Systems Cranes, Hydraulic Power Units (HPUs) low Out Preventers (OP) SUS PPLICTIONS Christmas Trees Manifolds low Out Preventers (OP) Subsea ccumulator Modules (SMs) and/or Subsea Control Modules (SCMs) INUSTRIL Hydraulic Power Units (HPUs) Plastic Moulding Machines Hydraulic Presses 96 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 Technical Characteristics The accumulator comprises of: Shell Forged seamless chrome molybdenum steel, designed and manufactured to P 04/68/U and C marked. Label With assembly specification and installation details. Material Certification vailable on request for all major pressure loaded parts to N 004. Finish One coat primer paint as standard. Special paints available. ladder Totally enclosed construction with an extensive range of elastomers available. Fluid Port ssembly Integral high-flow port and poppet valve assembly with an anti-extrusion ring. Safety ll gas-loaded accumulators are pressurised vessels and it is recommended that safety consideration be given to the application in which they are used. relief valve should always be fitted to the hydraulic system with the option of a burst disc to protect the accumulator. See Installation and Servicing data sheet for information regarding installation of accumulators. Pressure Testing hydro static pressure test is carried out on all our accumulator shells during the manufacturing process. We can carry out additional pressure testing witnessed by a specified Inspection uthority and/or customer as an optional extra if required. We can also carry out a hydro-pneumatic pressure test on the complete assembly as an optional extra if required. gain this can be witnessed by a specified inspection authority and/or customer. ccessories complete range of accumulator accessories are available from Parker. Spare Parts vailable on request. ladder etails Parker offer a wide range of bladder materials to suit most applications. Table - Material according to temperature range. Range of bladder materials available with their corresponding working temperature range when handling non-aggressive fluids. Material ladder Material Temperature Range (eg. C) Code Static ynamic 0 Nitrile -0 00-5 00 utyl -5 0-5 0 Low Temp Nitrile -40 70-5 70 Low Permeability Nitrile 0 05 6 Fluorocarbon (Viton) -0 0 7 High romatic Nitrile 0 05 8 High Temp Nitrile 0 50 9 PI - Chlorohydin 00-0 0 thylene Propylene (P) -0 0 PI - Chlorohydin 00-40 0 K Special Low Temp Nitrile -79 00-59 00 L Peroxide Cured PM please contact us for details M High Temperature Flurocarbon -0 00 N Low Temp Nitrile -45 70 Table - ladder capacity / overall dimensions ccumulator imension Stem iameters Capacity (Litres) H 5/8 7/8 Nominal (6mm) (mm) (50mm) 0.6 54 4 * 0.6 7 *.5 (.5) 47 9 * * 5 00 * * 4 0 4 * 5 680 00 * 6 05 4 * 9 (0) 570 4 *.5 655 4 * 0 8 98 * * 406 98 * 0 60 98 * * 4.5 79 98 * 8 880 98 * 7 8 98 * * 4 80 98 * 54 60 98 * * 97 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series, 07 to 40 bar 4 5 ladder Kit comprising: ladder assembly ladder Gas valve assembly Locknut Protective cap 'O' ring stem nti extrusion ring assembly C 4 5 nti extrusion ring 'O' ring fluid port onded seal* 4 ack-up ring Fluid port assembly comprising Fluid port body Spring Poppet valve 4 5 Collett Piston 6 7 8 9 C C C C Flanged washer Locking ring leed adaptor* leed valve* Shell assembly comprising: Shell Label Label warning 6 7 4 4 Note: Models /54 litres detailed above. Models 0.6 litres have Gas Valve assembly integral with bladder stem without protective cap fitted. * Not fitted on all models 5 8 9 98 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series 07 to 40 bar: How to order Volume in Litres O: for 0.6 Litres 0: for 0 Litres OF: for 0.6 Litres 0: for 0 Litres 0: for Litres 8: for 8 Litres 0: for.5 Litres 7: for 7 Litres 04: for 4 Litres 54: for 54 Litres 0400-00-4 ladder Material 0: Nitrile standard : utyl : Low temperature nitrile : Low permeability nitrile 6: Viton 8: High temperature nitrile ladder Stem/Gas Valve 0.6 to Litres 4-7 Litres 0: 5/8 UNF CS Stem/ /4 SP rass Gas Valve 7/8 UNF CS Stem/ /4 SP rass Gas Valve S: 5/8 UNF SS Stem/ /4 SP SS Gas Valve 7/8 UNF SS Stem/ /4 SP rass Gas Valve F: n/a 7/8 UNF SS Stem/ /4 SP SS Gas Valve 9: 5/8 UNF CS Stem/ 0.0 - rass Gas Valve n/a 4: n/a 7/8 UNF CS Stem/ 0.0 - rass Gas Valve 6: n/a n/a 54 Litres 0: M50x.5P CS Stem/ /4 SP rass Gas Valve S:M50x.5P SS Stem/ /4 SP rass Gas Valve F: M50x.5P SS Stem/ /4 SP SS Gas Valve 4: 7/8 UNF CS Stem/ 0.0 - rass Gas Valve 6: M50x.5P CS Stem/ 0.0 - rass Gas Valve Shell and Fluid Port 00: Oil service 0: Low/medium corrosive service (lined shell) W6: Stainless steel externals, unlined shell CZ: Stainless steel externals, unlined shell / NPT connection (0-54 litre only) W: Stainless steel externals, unlined shell /4 NPT connection (0-54 litre only) U: Stainless steel externals, unlined shell NPT connection (0-54 litre only) L: Stainless steel externals, unlined shell / SP connection (0-54 litre only) Z: Stainless steel externals, unlined shell /4 SP necked connection (0-54 litre only): : Oil service (NPT connection) 4: Low/ medium corrosive service (lined shell, NPT connection) Maximum Working Pressure 0: 07 bar : 0 bar 4: 45 bar 5: 50 bar 4: 40 bar (0-54L only) esign Standard/ uthority pproval : Lloyds/C 99 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series 45 bar, 0 to 57 Litres Standard version (Carbon Steel shell/nr mix) compatible with mineral oils (). ccording to P 04/68/U Part numbers, ccessories, imensions Clamps Support racket Lifting ye on gas side Complete Repair Kit Part Number (quantity) Part number Part number Part number Part number 00S-CZ-4 098 096 FCH409-00S-CZ 00S-CZ-4 098 096 FCH409-00S-CZ 80S-CZ-4 098 096 FCH409-80S-CZ 70S-CZ-4 098 096 FCH409-70S-CZ 540S-CZ-4 098 096 0*5K-C 540S-CZ * For more adaptor options see pages 74&75. Nominal Capacity Litres ffective Gas vol. Litres Work press. bar Max Flow Rate lt/min Weight ry Kilo imensions in mm unless stated otherwise and subject to manufacturer's tolerances C F G H J K L M N P O 0.6 45 7.00 ¼ SP 5/8 UNF 4 40 9 05 55 6 ½ SPF 6 - - - OF 0.60 45 09.70 ¼ SP 5/8 UNF 4 40 66 75 90 7 ¾ SPF 5 - - - 0.5 07 09 5.4 ¼ SP 5/8 UNF 4 40 9 00 5 7 ¾ SPF 5 - - - 0.5 45 09 5.7 ¼ SP 5/8 UNF 40 9 00 5 7 ¾ SPF 5 - - - 0.5 45 5 0.00 ¼ SP 5/8 UNF 40 506 40 5 49 SPF 44 5 5 4 04.8 07 477 5.0 ¼ SP 7/8 UNF 78 455 89 69 74 ¼ SPF 60 6 9 9 55 04.8 45 477 5.0 ¼ SP 7/8 UNF 78 455 89 69 74 ¼ SPF 60 6 9 9 55 0 9.4 07 749 5.00 ¼ SP 7/8 UNF 78 575 407 0 70 SPF 76 6 46 9 69 0 9.4 0 749 5.00 ¼ SP 7/8 UNF 78 575 407 0 70 SPF 76 6 46 9 69 0 9.4 45 749 5.00 ¼ SP 7/8 UNF 78 575 407 0 70 SPF 76 6 46 9 69 0 9.4 40 749 4.00 ¼ SP 7/8 UNF 78 575 407 6 70 SPF 76 6 46 9 69 0 8.8 07 749 55.00 ¼ SP 7/8 UNF 78 886 78 0 70 SPF 76 6 46 9 69 0 8.8 0 749 55.00 ¼ SP 7/8 UNF 78 886 78 0 70 SPF 76 6 46 9 69 0 8.8 45 749 55.00 ¼ SP 7/8 UNF 78 886 78 0 70 SPF 76 6 46 9 69 0 8.8 40 749 54.00 ¼ SP 7/8 UNF 78 886 78 6 70 SPF 76 6 46 9 69 8 5.8 07 749 6.00 ¼ SP 7/8 UNF 78 58 990 0 70 SPF 76 6 46 9 69 8 5.8 45 749 6.00 ¼ SP 7/8 UNF 78 58 990 0 70 SPF 76 6 46 9 69 7 5. 07 749 9.00 ¼ SP 7/8 UNF 78 407 9 0 70 SPF 76 6 46 9 69 7 5. 0 749 9.00 ¼ SP 7/8 UNF 78 407 9 0 70 SPF 76 6 46 9 69 7 5. 45 749 9.00 ¼ SP 7/8 UNF 78 407 9 0 70 SPF 76 6 46 9 69 7 5. 40 749 86.00 ¼ SP 7/8 UNF 78 407 9 6 70 SPF 76 6 46 9 69 54 49. 07 749 0.00 ¼ SP M50x.5 69 66 9 766 0 70 SPF 76 6 46 9 69 54 49. 0 749 0.00 ¼ SP M50x.5 69 66 9 766 0 70 SPF 76 6 46 9 69 54 49. 45 749 0.00 ¼ SP M50x.5 69 66 9 766 0 70 SPF 76 6 46 9 69 54 49. 40 749 9.00 ¼ SP M50x.5 69 66 9 766 6 70 SPF 76 6 46 9 69 00 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 Part Number Vol. (Litres) Max. Operating Pressure (bar) Max. Flow Rate (lpm) Min/Max Operating Weight Temp. (kg) (ºC) Gas Valve Size () (Inch) imensions C F G H Fluid Port Connection (J) K L M N P 00S-CZ-4 0 45 0-0/+80 5 G /4 7/8 UNF 78 55 407 0 48 ½"NPTF 76 6 46 9 69 00S-CZ-4 0 45 0-0/+80 55 G /4 7/8 UNF 78 864 78 0 48 ½"NPTF 76 6 46 9 69 80S-CZ-4 8 45 0-0/+80 6 G /4 7/8 UNF 78 6 990 0 48 ½"NPTF 76 6 46 9 69 70S-CZ-4 7 45 0-0/+80 9 G /4 7/8 UNF 78 85 9 0 48 ½"NPTF 76 6 46 9 69 540S-CZ-4 54 45 0-0/+80 0 G /4 M50x.5 69 66 900 766 0 48 ½"NPTF 76 6 46 9 69 ()Temperature range can change depending on shell and elastomer material. Please see bladder materials and Type (page 87) bove dimensions are in mm and are subject to manufacturing tolerances. C GS VLV STM /F G PROTCTIV CP ON 04L N OV F H TIL 0/7L F P (/F) N (/F) H M J K L 0 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series, 480 & 57 bar 4 5 4 ladder Kit comprising: ladder assembly ladder Gas valve assembly Locknut Protective cap 'O' ring stem nti extrusion ring assembly nti extrusion ring 'O' ring fluid port* onded seal ack-up ring C 4 5 4 5 6 Fluid port assembly comprising Fluid port body Spring Poppet valve Collett Piston Flanged washer C C C C Shell assembly comprising: Shell Label Label warning 6 4 4 5 SCTION - SCL : 5 0 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series 480 and 57 bar: imensions Capacities and imensions Nominal Capacity Litres ffective Gas vol. Litres Work press. bar Max Flow Rate lt/min Weight ry Kilo imensions in mm unless stated otherwise and subject to manufacturer's tolerances C F G H J K L 76 69 0 9.4 480 5 4 ¼ SP 7/8 UNF 78 575 407 9 70 0 9.4 57 5 54 ¼ SP 7/8 UNF 78 575 407 4 70 76 69 0 8.8 480 5 54 ¼ SP 7/8 UNF 78 886 78 9 70 76 69 0 7 8.8 5. 57 480 5 5 00 86 ¼ SP ¼ SP 7/8 UNF 7/8 UNF 78 78 886 407 78 9 4 9 70 70 see table 76 76 69 69 7 5. 57 5 5 ¼ SP 7/8 UNF 78 407 9 4 70 76 69 54 49. 480 5 9 ¼ SP M50x.5P 69 66 9 766 9 70 76 69 57 54.5 57 5 0 ¼ SP M50x.5P 69 66 980 84 4 70 76 69 Note: imensions are based on current stock and are subject to change without prior notice. imension J Code Shell and Fluid Port H Stainless Steel - / NPT female (480 bar) GC Stainless Steel - / SP female (57 bar) GJ Stainless Steel - / SP female (480 bar) J Stainless Steel - / NPT female (57 bar) Other available on request. GS VLV STM C /F G F L /F H J K 0 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series 480 to 57 bar: How to order Volume in Litres 0: for 0 Litres 0: for 0 Litres 8: for 8 Litres 7: for 7 Litres (480 bar only) 54: for 54 Litres (57 bar only) 00M-H-48 ladder Material 0: Nitrile standard : utyl : Low temperature nitrile : Low permeability nitrile 6: Viton 8: High temperature nitrile ladder Stem/Gas Valve 0 to 7 Litres M: 7/8 UNF SS Stem / /4 SP SS HP Gas Valve N: 7/8 UNF SS Stem / / UNF Port (No Gas Valve/Pro Cap) 54 Litres M: M50 x.5p SS Stem / /4 SP SS HP Gas Valve N: M50 x.5p SS Stem / / UNF Port (No Gas Valve/Pro Cap) Shell and Fluid Port H: St. Steel Fluid Port - / NPT female (480 bar) GC: St. Steel Fluid Port - / SP female (57 bar) GJ: St. Steel Fluid Port - / SP female (480 bar) J: St. Steel Fluid Port - / NPT female (57 bar) Maximum Working Pressure 48: 480 bar 5: 57 bar Maximum Working Pressure : Lloyds/C 04 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series, 690 to 760 bar ladder Kit comprising: ladder assembly comprising of:- ladder Gas valve assembly F 4 Locknut Protective cap 5 6 'O' ring stem Lifting ye C nti extrusion ring assembly:- nti extrusion ring 5 'O' ring fluid port* ack-up ring 4 5 6 7 Fluid port assembly comprising:- Fluid port body Spring Poppet valve Collett Piston Flanged washer Lock ring C C Shell assembly comprising: Shell C C Label Label warning F Lifting ye ssembly:- F F Protective cap Lifting ye 5 4 6 7 05 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 Nominal Capacity Litres ffective Gas vol. Litres Work press. bar Q Max (l/min) Weight ry Kilo O&G Series 690 to 760 bar: imensions imensions in mm unless stated otherwise and subject to manufacturer's tolerances C F G H J K L 7/8"UNF 69 76 9 68 48 45. 690 40 9.4 690 40 5 7/8" UNF 69 55 44 68 48 45 5 5 690 40 9 7/8" UNF 69 900 76 68 See 48 45 9.4 9.4 690 760 749 749 97 97 See elow M50x.5P M50x.5P 69 69 66 66 768 768 58 58 67 67 84 84 elow 8 8 77 77 0 8.8 690 749 4 M50x.5P 69 66 978 78 67 84 8 77 0 8.8 760 749 4 M50x.5P 69 66 978 78 67 84 8 77 7 5. 690 749 7 M50x.5P 69 66 500 50 67 84 8 77 7 5. 760 749 7 M50x.5P 69 66 500 50 67 84 8 77 54 49. 690 749 8 M50x.5P 69 66 05 765 67 84 8 77 54 49. 760 749 8 M50x.5P 69 66 05 765 67 84 8 77-5 Litre (Gas Valve Litre and above accumulators L and above accumulators include a lifting eye (Gas Valve) C (/F) C (/F) G imension - ladder Stem/Gas Valve Code - 5 Litre - 54 Litre L 5K 7/8"UNF SS Stem / /4"SP SS HP Gas Valve M50x.5P SS Stem / /4"SP SS HP Gas Valve F imension J - Shell and Fluid Port Code - 5 Litre - 54 Litre P Stainless Steel / "SP Female Special C SS xternals/cs Internals / "SP Female Special F SS xternals/ss Internals / "SP Female Special Note: imensions are based on current stock and are subject to change without prior notice. H J K L (/F) 06 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 O&G Series 690 to 760 bar: How to order Volume in Litres 0: for Litres 0: for 0 Litres 0: for.5 Litres 7: for 7 Litres 05: for 5 Litres 54: for 54 Litres : for Litres 050L-P-69 ladder Material 0: Nitrile standard : Low permeability nitrile : utyl 6: Viton : Low temperature nitrile 8: High temperature nitrile ladder Stem/Gas Valve - 5 Litres - 54 Litres L: 7/8 UNF SS Stem / /4 SP SS HP Gas Valve 5K: M50 x.5p SS Stem / /4 SP SS HP Gas Valve Shell and Fluid Port - 5 Litres - 54 Litres P: St. Steel Fluid Port / SP Female Special C: SS xternals/ CS Internals/ SP Female Special F: SS xternals/ SS Internals/ SP Female Special (see table on next page for fluid port adaptors) Maximum Working Pressure+ 69: 690 bar 75: 750 bar (-5 litre only) 76: 760 bar (-54 litre only) Maximum Working Pressure : Lloyds/C 07 Parker Hannifin
Catalogue HY0-4004/UK rev. 0 Fluid Port daptors Nominal Capacity (Litres) imensions J N P (mm) Part Number "SP /4"SP 0 5799-XXX "SP /8" SP 0 55456-XXX "SP /" SP 0 5460-XXX - 5 litres "SP /4" SP 0 576-XXX "SP /4" NPT 0 557-XXX "SP /" NPT 0 5059-XXX "SP /4" NPT 0 5-XXX "SP /8"MP utoclave 0 5600-XXX "SP 9/6"MP utoclave 0 57-XXX "SP /4"SP 5574-XXX " SP /8"SP 5575-XXX - 54 litres " SP /"SP 5576-XXX " SP /4"SP 5577-XXX " SP /4"NPT 5569-XXX " SP /8"NPT 5570-XXX " SP /"NPT 557-XXX " SP /4"NPT 557-XXX " SP /4"MP utoclave 8 546-XXX " SP /8"MP utoclave 8 5587-XXX P JM JM N 08 Parker Hannifin