FIELD GUIDE
WHY DENALI? Our LED light kits are purpose-built for motorcycles, with compact pods delivering unmatched output for their size. We lab test every light we engineer to fine-tune our optic and reflector designs, to ensure we re unleashing the full potential of each LED. We also go to great lengths to develop bike-specific mounts and wiring adapters, so you can spend less time in the garage and more time on the road.
AUXILIARY LED LIGHTING KITS DR1 Single Intensity LED Auxiliary Lights The large 10 optic maximizes the distance you can see down the road with a concentrated spot beam pattern. This light is ideal for nighttime riding, on- or off-road. Pod Size: 3.75 round x 3.8 long LED: (1x) 10 watt CREE XM-L2 Beam Distance: 695 feet Input Voltage: 12v DC Power Draw: 1.5 amp per pair $349.99 TT-DR1 DR1 Single Intensity LED Auxiliary Lights Chrome The large 10 optic maximizes the distance you can see down the road with a concentrated spot beam pattern. This light is ideal for nighttime riding, on- or off-road. Pod Size: 3.75 round x 3.8 long LED: (1x) 10 watt CREE XM-L2 Beam Distance: 695 feet Input Voltage: 12v DC Power Draw: 1.5 amp per pair $349.99 TT-DR1.C DX Xtreme Spot Dual Intensity LED Auxiliary Lights The same 10 optic and light output as the DR1, with the added benefit of a dual intensity setup. You can wire the DX to your high/low beam switch for half or full intensity. Pod Size: 3 square x 3.75 long LED: (1x) 10 watt CREE XM-L2 Beam Distance: 695 feet Input Voltage: 12v DC Power Draw: 1.5 amp per pair $389.99 TT-DX D4 Flood & Spot Hybrid LED Auxiliary Lights Our most powerful light packs four LEDs: two 60 elliptical flood lenses and two 10 spot beam lenses, providing a super wide close-range flood and a piercing spot beam. Pod Size: 3.9 square x 2.5 long LED: (4x) 5 watt CREE XP-G2 Beam Distance: 550 feet Input Voltage: 12v DC Power Draw: 3 amp per pair $309.99 TT-D4 D2 Dual Intensity LED Auxiliary Lights The D2 s unique optic provides the perfect blend of daytime visibility and nighttime vision, with the added convenience of a high/low beam option. Pod Size: 2 round x 2.4 long LED: (1x) 10 watt CREE XM-L2 Beam Distance: 423 feet Input Voltage: 12v DC Power Draw: 1.5 amp per pair $379.99 TT-D2
AUXILIARY LED LIGHTING KITS D2 Dual Intensity LED Auxiliary Lights Chrome The D2 s unique optic provides the perfect blend of daytime visibility and nighttime vision, with the added convenience of a high/low beam option. Pod Size: 2 round x 2.4 long LED: (1) 10 watt CREE XM-L2 each Beam Distance: 423 feet Input Voltage: 12v DC Power Draw: 1.5 amp per pair $379.99 TT-D2.C DM Micro Single Intensity LED Lights Piercingly bright when viewed head-on, these compact lights signficantly enhance daytime visibility while throwing a light beam 85 feet farther than stock headlights. Pod Size: 1.7 round x 2.4 long LED: (1x) 5 watt CREE XP-G2 Beam Distance: 240 feet Input Voltage: 12v DC Power Draw: 0.75 amp per pair $249.99 TT-DM DM Micro Single Intensity LED Lights Chrome Piercingly bright when viewed head-on, these compact lights signficantly enhance daytime visibility while throwing a light beam 85 feet farther than stock headlights. Pod Size: 1.7 round x 2.4 long LED: (1x) 5 watt CREE XP-G2 Beam Distance: 240 feet Input Voltage: 12v DC Power Draw: 0.75 amp per pair $249.99 TT-DM.C
LIGHT DATA FROM THE DENALI LABORATORY
UNIVERSAL AUXILIARY LIGHT MOUNTS Fender Bolt Mount Kit For DM & D2 Auxiliary Lights This simple solution offers an ultra low-profile look and works on nearly any motorcycle. Use it to mount DM and D2 lights in place of any M5 or M6 bolts. Designed & engineered in the USA Available in black or chrome Simple & easy to install Permits up & down adjustment of lights $40.00 LAH.00.10700 Universal Pivot Mount Kit The most universal mounting solution we know of! This kit mounts to any M5, M6, or M8 bolt point, vertically or horizontally, and offers three-axis adjustability. $59.99 LAH.00.10000 Inverted Fork Tube Mount For 50mm-60mm Tubes The adjustable, octagonal inner profile securely grips inverted forks or the lower legs of conventional forks. Rotatable mounting shelf lets you adjust beam angle Lights can be mounted to shelf or directly to clamp Billet aluminum with black anodized finish $79.99 LAH.00.10500.B Conventional Fork Tube Mount For 39mm-49mm Tubes - Black The adjustable, octagonal inner profile securely grips inverted forks or the lower legs of conventional forks. Rotatable mounting shelf lets you adjust beam angle Lights can be mounted to shelf or directly to clamp Billet aluminum with black anodized finish $79.99 LAH.00.10600.B Conventional Fork Tube Mount For 39mm-49mm Tubes - Chrome The adjustable, octagonal inner profile securely grips inverted forks or the lower legs of conventional forks. Rotatable mounting shelf lets you adjust beam angle Lights can be mounted to shelf or directly to clamp Billet aluminum with chrome finish $84.99 LAH.00.10600.C
UNIVERSAL AUXILIARY LIGHT MOUNTS Crash Bar/Frame Mount For 32mm-38mm Tubes - Black Lets you mount lights inside the crash bars to protect them, or on frame downtubes for a low-profile look. Rotatable mounting shelf lets you adjust beam angle Lights can be mounted to shelf or directly to clamp Billet aluminum with black anodized finish $77.99 LAH.00.10400.B Crash Bar/Frame Mount For 32mm-38mm Tubes - Chrome Lets you mount lights inside the crash bars to protect them, or on frame downtubes for a low-profile look. Rotatable mounting shelf lets you adjust beam angle Lights can be mounted to shelf or directly to clamp Billet aluminum with chrome finish $82.99 LAH.00.10400.C Crash Bar Mount For 22mm-29mm Tubes - Black This mount lets you position the lights inside the crash bars to protect them in a tip-over. Billet aluminum with black anodized finish Fits all SW-MOTECH, R&G, GIVI, Kappa, Hepco-Becker, Krauser, Touratech, and BMW crash bars $74.99 LAH.00.10300.B
BIKE-SPECIFIC AUX. LIGHT MOUNTS BMW G650GS 09-16 & F650GS Single 04-07 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $79.99 LAH.07.10600 BMW F650GS Twin 08-12 & F800GS 08-12 This offset spacer mount provides a simple and secure mounting solution for DENALI D2 and DM auxiliary lighting kits. For further fitment information, see the light mount application chart, switch mount plate application guide, and wire identification guide at twistedthrottle.com. $24.95 TM.51005 BMW F800GS & F800GS Adventure 13-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $49.99 LAH.07.10100 BMW K1600GT & K1600GTL 10-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $59.99 LAH.07.10200 BMW R1150GS, 99-04 & R1150GS Adventure 02-05 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $51.95 NSW.07.004.10101.B
BIKE-SPECIFIC AUX. LIGHT MOUNTS BMW R1200GS 04-12 & R1200GS Adventure 05-13 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $40.99 LAH.07.10300 BMW R1200GS LC 13-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $62.99 LAH.07.10400 BMW R1200GS LC 13-16 DENALI DM Micro LED Lights & Mount Kit This powder coated steel bracket locates the two DENALI DM pods directly below your stock headlight for a clean, factory-looking fit. Includes a complete DENALI DM LED light kit. Does NOT fit bikes equipped with OEM LED headlight. $289.98 LAH.DM.07.10000 BMW R1200RT 05-13 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $47.99 LAH.07.817.10000.B Ducati Multistrada 1200 & 1200s (all editions) 10-14 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $62.99 LAH.22.10000
BIKE-SPECIFIC AUX. LIGHT MOUNTS Harley-Davidson FL, Dyna, Softail & Sportster (select models) Makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. The kit allows fitment of any DENALI LED lighting kit to Harley-Davidson Sportster, Softail, and Touring models. See the online application chart for specific models and years. $75.00 LAH.23.10800.B Honda CB500X 13-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $59.95 NSW.01.004.10400.B Select Honda Cruisers Makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. The kit allows fitment of any DENALI LED lighting kit to the Honda Interstate, Stateline, Sabre, Shadow RS, Shadow Spirit 750, Shadow Aero, and Shadow Phantom. See the online application chart for specific model years. $75.00 LAH.01.10200.B Honda NC700X 12-15 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $34.99 LAH.01.10000 Honda ST1300 02-15 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $62.99 LAH.01.10100
BIKE-SPECIFIC AUX. LIGHT MOUNTS Kawasaki Concours 1400 & GTR1400 08-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $74.99 LAH.08.10200 Kawasaki KLR650 08-17 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $80.99 LAH.08.10000 Kawasaki Versys 1000 12-14 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $74.95 NSW.08.004.10300.B Kawasaki Versys 1000 LT 15-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $71.99 LAH.08.10400 Kawasaki Versys 650 07-09 (DM and D2 only) This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $24.99 LAH.08.10100
BIKE-SPECIFIC AUX. LIGHT MOUNTS Kawasaki Versys 650 10-14 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $59.99 LAH.08.10300 Select Kawasaki Cruisers Makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. The kit allows fitment of any DENALI LED lighting kit to the Kawasaki Vulcan Vaquero, Vulcan Voyager, and Vulcan 900. See the online application chart for specific model years. $75.00 LAH.08.10500.B KTM 1190 Adventure & Adventure R 13-16 Auxiliary Light Mounting Bracket This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $84.99 LAH.04.10100 KTM 950 Adventure, 990 Adventure & 990 SMT Makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. This kit fits the KTM 950 Adventure & Adventure S 03-05, 990 Adventure S/R/Dakar/Baja 06-13, 990 SMT 08-13, and LC8 Supermoto T 10-13. $60.95 NSW.04.004.10100.B Suzuki DL1000 V-Strom & V-Strom Adventure 14-15 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $69.99 LAH.05.10200
BIKE-SPECIFIC AUX. LIGHT MOUNTS Suzuki DL650 V-Strom & V-Strom Adventure 04-11 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $53.99 LAH.05.10100 Suzuki DL650 V-Strom 12-16 & V-Strom 650XT 15-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $49.99 LAH.05.10000 Triumph Bonneville, Thruxton, Scrambler & T100 Dual DR1 Headlight Conversion Kit Give the front end of your Triumph Bonneville 01-16, T100 01-16, Thruxton 04-15, or Scrambler 06-15 a complete makeover with the DENALI Dual DR1 headlight conversion kit. The kit replaces the OEM headlight with two super bright DENALI DR1 pods, which shine light an outstanding 695 feet down the road. The kit includes brackets to relocate the turn signals, ignition, horn, and rectifier. $491.95 LAH.11.10400 Triumph Tiger 1050 07-12 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $25.99 TWT.LAH.11.007.100 Triumph Tiger 800 Makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. This kit allows fitment of any DENALI LED lighting kit to the Tiger 800 10-14, Tiger 800 XC 10-16, Tiger 800 XCx 15-16, Tiger 800 XR 15-16, and Tiger 800 XRx 15-16. $40.99 LAH.11.10000
BIKE-SPECIFIC AUX. LIGHT MOUNTS Triumph Tiger Explorer 1200 & Explorer 1200 XC 12-15 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $54.99 LAH.11.10100 Ural Motorcycles (all models) This mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $37.99 LAH.12.10000 Select Yamaha Star Cruisers Makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. The kit allows fitment of any DENALI LED lighting kit to the Yamaha Star Bolt, Road Star, XVS1100A V-Star, XVS1300 V-Star, XVS250 V-Star, and XVS950 V-Star. See the online application chart for specific model years. $75.00 LAH.08.10500.B Yamaha XT1200Z Super Tenere 11-16 This bike-specific mount makes your DENALI light installation quick, painless, and as perfectly integrated as your original equipment. No cutting, drilling, or welding is required! All mounting hardware and instructions are included. $51.99 LAH.06.10000
AUXILIARY LIGHT SWITCH MOUNTS Angled Switch Mount Plate For Vertical Perch Bolts - Single Use this plate to mount a single accessory switch to any clutch or brake housing with a vertical perch bolt mount, by replacing the stock bolt with the included hardware. The kit includes a longer bolt and two spacers of different lengths. Not exclusive to DENALI light switches. $12.99 MBK.00.10300 Angled Switch Mount Plate For Vertical Perch Bolts - Double Use this plate to mount two accessory switches to any clutch or brake housing with a vertical perch bolt mount, by replacing the stock bolt with the included hardware. The kit includes a longer bolt and two spacers of different lengths. Not exclusive to DENALI light switches. $12.99 MBK.00.10400 Flat Switch Mount Plate For Horizontal Perch Bolts - Single Use this plate to mount a single accessory switch to any clutch or brake housing with a horizontal perch bolt mount, by replacing the stock bolt with the included hardware. The kit includes a longer bolt and two spacers of different lengths. Not exclusive to DENALI light switches. $11.99 MBK.00.10100 Flat Switch Mount Plate For Horizontal Perch Bolts - Double Use this plate to mount two accessory switches to any clutch or brake housing with a horizontal perch bolt mount, by replacing the stock bolt with the included hardware. The kit includes a longer bolt and two spacers of different lengths. Not exclusive to DENALI light switches. $11.99 MBK.00.10200
DR1 BEAM PATTERNS FROM THE DENALI LABS DX 10 Degree Optic (Installed) Flood Snap-On Filter (option) Euro Driving Snap-On Filter (option) 10 Degree Optic (Installed) 40 Degree (option) D4 (4x)10 Degree Optics (option) (2x) 10 / (2x) Elliptical Optics (installed) D2 DM 10 Degree Optic (Installed) 40 Degree (option) 10 Degree Optic (Installed) 40 Degree (option)
AUXILIARY LED LIGHT ACCESSORIES Wide Angle Snap-On Beam Filter Set For DR1 Lights, Amber Or Clear This filter turns the DR1 s standard spot beam into a horizontal beam, providing maximum width without sacrificing vertical coverage. The amber version of the filter improves your visual range in fog and rain by blocking the blue light frequencies that reflect off water vapor. $39.99/pr DNL.LF.101.00.C DNL.LF.101.00.A Flood Snap-On Beam Filter Set For DR1 Lights, Amber Or Clear This filter widens the DR1 s standard spot beam in all directions, providing a broad spread of light to maximize your field of view. The amber version of the filter improves your visual range in fog and rain by blocking the blue light frequencies that reflect off water vapor. $39.99/pr DNL.LF.100.00.C DNL.LF.100.00.A Spot Snap-On Beam Filter Set For DR1 Lights, Amber Or Clear This rugged, shatterproof polycarbonate cover protects the DR1 light pod while maintaining the long-distance 10 spot beam that comes standard in the DR1. The amber version of the filter improves your visual range in fog and rain by blocking the blue light frequencies that reflect off water vapor. $39.99/pr DNL.LF.102.00.C DNL.LF.102.00.A Protective Black-Out Lens Cover Set For DR1 Lights Keep your bike street-legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, snap the covers off and go! The rugged, shatterproof polycarbonate construction of these snap-on covers protects the light pods from rocks and other debris, providing an even longer lifespan for your DR1 lights. $39.99/pr DNL.LF.103.00.B Y Adapter (One Light To Two) For DENALI Single-Intensity LED Lights This adaptor allows you to connect two sets of DENALI accessory lights to one wiring harness and switch, effectively converting a two-lamp driving light kit to a four-lamp kit. $12.99 TT-D1.S-DY2M1F
REPLACEMENT MODULES FOR ROUND HEADLIGHTS M7 DOT LED Headlight Module This plug-n-play headlight module offers three times the light output of a halogen headlight, with a unique design and cool custom look. It has a wide low beam, high beam, and daytime halo running light. Pod Size: 7 round x 2.9 deep Beam Distance: High 600 feet, Low 550 feet Input Voltage: 9v-32v DC Waterproof: IP-68 Power Draw: High 19w/Low 22w/Halo 6w $429.00 TT-M7 M5 DOT LED Headlight Module This plug-n-play headlight module offers three times the light output of a halogen headlight, with a unique design and cool custom look. It has a wide low beam, high beam, and daytime halo running light. Pod Size: 5.75 round x 2.1 deep Beam Distance: High 500 feet, Low 525 feet Input Voltage: 9v-32v DC Waterproof: IP-68 Power Draw: High 19w/Low 22w/Halo 6w $399.99 TT-M5 H9/H11 To H4 Headlight Wiring Adapter For Select Harley-Davidsons This adapter allows direct plug-n-play connection of the DENALI M5 or M7 headlight module to the OEM connectors of an original H9 (high)/h11 (low) split LED headlight. The adapter converts both connectors into one female H4 plug no need to splice any wires! For the CVO Road King 14-16, Road King 14-16, Street Glide 14-16, and Street Glide Special 14-16. $39.99 DNL.WHS.10400 All-On Combination Low Beam With High Beam Conversion H4 Headlight Wiring Harness Designed exclusively for DENALI M5 and M7 headlight modules, this adapter lets you run the high and low beams simultaneously for maximum light output and enhanced visibility. Installation is plug-n-play, with no modifications or additional switches required. Note: Does not trigger the halo running light. $27.99 DNL.WHS.10200 OEM Harley Davidson LED To H4 Headlight Wiring Adapter This plug-n-play adapter makes it easy to install a DENALI M5 or M7 headlight module into any Harley-Davidson equipped with an original LED headlight. Get a simple, super clean installation with no need to modify the factory wiring harness. $29.99 DNL.WHS.10300
HEADLIGHT MODULE ADAPTER KITS M5 Headlight Module Adapter Kit For Select Yamaha Motorcycles This bracket allows fitment of the DENALI M5 headlight module to the Yamaha Bolt 14-16, Raider 08-16, Road Star Midnight Warrior 05-09, Road Star Warrier 02-09, Stryker 11-16, and V-Star 950 09-16. Laser-cut steel ensures a precise fit, while the black powder-coated finish resists corrosion. $29.99 LAH.06.10100 M7 Headlight Module Adapter Kit For Select Suzuki Motorcycles This bracket allows fitment of the DENALI M5 headlight module to the Suzuki Boulevard C50 05-09 and 11-16, Boulevard C90 05-09 and 13-16, and Volusia 01-04. Laser-cut steel ensures a precise fit, while the black powder-coated finish resists corrosion and gives the bracket a factory look. $39.99 LAH.05.10400 M7 Headlight Module Adapter Kit For Suzuki DR-Z400 03-17 & DR650 02-17 This bracket allows fitment of the DENALI M7 headlight module to the Suzuki DR-Z400 03-17 and DR650 02-17. Laser-cut steel ensures a precise fit, while the black powder-coated finish resists corrosion and gives the bracket a factory look. The kit includes all necessary hardware. $30.99 LAH.05.10300
HORNS AND HORN WIRING KITS SoundBomb Compact Dual-Tone Air Horn Producing an earsplitting 120 decibels of sound, the SoundBomb is four times louder than a standard motorcycle horn! Thanks to its compact design and blackedout housing, it practically disappears. Sound Output: 120 db at 3 feet Power Draw: 20 amps Dimensions: 5.4 x 4.5 x 3.6 CANbus compatible $49.99 TT-SB.10000.B SoundBomb Split Dual-Tone Air Horn This horn produces the same earsplitting sound as the Compact version, with a unique two-piece design for a broader range of mounting options. Sound Output: 120 db at 3 feet Power Draw: 20 amps Size (Compressor): 4.5 x 2.9 x 3.0 Size (Acoustic Unit): 4.1 x 3.7 x 3.4 $54.99 TT-SB.10100.B SoundBomb Mini Electromagnetic Low-Tone Horn At 113 decibels, the distinct low-tone sound from the SoundBomb Mini is twice as loud as a typical 100db disc horn. A direct plug-n-play upgrade for your factory horn, this unit requires no additional relay or wiring harness. Sound Output: 113 db at 3 feet Operating voltage: 12 volts Power Draw: 5 amps Single piece design Size: 3.25 x 3.4 x 2.5 $29.99 TT-SB.10200.B Plug-N-Play Wiring Kit For SoundBomb Air Horns Use this kit for stock horns with blade-style electrical connections, to install a SoundBomb with no cutting, soldering, slicing, or crimping needed. Simply clip one lead to your horn trigger wire, one lead to battery ground, and one lead to battery positive, and plug in the horn s relay. $26.99 DNL.ELC.10000 Wiring Adapter For Connecting Sound- Bomb Horns To OEM BMW Harness This adapter creates a true plug-n-play connection to the OEM BMW harness, with no need to modify the original factory wiring. No other wiring is needed for the SoundBomb Mini, while the adapter functions as a trigger for the SoundBomb Compact and Split horns (your factory horn button will activate the SoundBomb). $15.99 DNL.WHS.10100
UNIVERSAL HORN MOUNTS Engine Guard/Crash Bar Horn Mount For 22mm-29mm Tubes This adjustable clamp mount lets you position the horn inside the crash bars to keep it protected in a tip over, while the rotatable mounting shelf lets you fine-tune the horn positioning. This mount can be used with either the Sound- Bomb Compact horn or the compressor of the SoundBomb Split horn. $44.99 HMT.00.10100.B L Bracket Accessory Mount, 2.5 Inch Made from a heavy-duty 3mm thick, 1-inch wide strip of steel, this bracket is powder-coated flat black for a durable finish and unobtrusive look. The overall size of the bracket is 1.1 x 3, while the distance of the hole centers to the 90-degree bend is.7 and 2.55. The inner hole diameter is 5/16 (8mm). $9.99 TWT-00-013-001 Accessory Mount Bracket, 3 Inch Made from a heavy-duty 3mm thick, 1-inch wide strip of steel, this bracket is powder-coated flat black for a durable finish and unobtrusive look. The overall length of the bracket is 4 ; the center-to-center hole distance is 3. The inner hole diameter is 5/16 (8mm). $9.99 TWT-00-013-003 Do-It-Yourself Wiring Kit For SoundBomb Air Horns All the supplies and parts you need to wire a horn to your bike, without going to the hardware store and wondering if you have everything. It also uses an ATC inline fuse instead of a typical, fragile glass fuse. This kit can be used for the SoundBomb and other replacement horns requiring a dedicated relay. $14.99 TT-00013.10000
BIKE-SPECIFIC HORN MOUNTS Horn Mounting Bracket For BMW G650GS 09-16 & F650GS Single 00-07 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $21.99 HMT.07.10200 Horn Mounting Bracket For BMW F800GS 13-16, F800GSA 14-16 & F700GS 13-16 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $15.99 HMT.07.10000 Horn Mounting Bracket For BMW S1000XR 16 DENALI SoundBomb Split Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $22.99 HMT.07.10600 Horn Mounting Bracket For BMW R1200GS LC 13-16 DENALI SoundBomb Compact Horn, with a sturdy, black powder-coated steel bracket for a durable finish and a factory look. Note: This bracket does not fit all versions of the R1200GS and R1200GSA. For details, please see the product page on our website. $18.99 HMT.07.10400 Horn Mounting Bracket For BMW R1200RT 14-16 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $17.99 HMT.07.10300
BIKE-SPECIFIC HORN MOUNTS Horn Mounting Bracket for BMW K1600GT 12-16 & K1600GTL 12-16 DENALI SoundBomb Split Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $13.99 HMT.07.10500 Horn Mounting Bracket For Ducati Multistrada 1200 & 1200s 10-14 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. Note: This mount interferes with the OEM crash bars on the Granturismo edition. $29.99 HMT.22.10000 Horn Mounting Bracket For Select Harley-Davidson Motorcycles DENALI SoundBomb Compact Horn. Fitments include the Harley Softail 84-00, Sportster 86-17, Sportster Super Low 03-17, Sportster Iron 883 07-17, Sportster Super Low 03-17, and Touring 84-99. $26.99 HMT.23.10000 Horn Mounting Bracket For Honda NC700X 12-15 This sleek horn mount offers a clean and simple mounting solution for the DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $23.99 HMT.01.10000 Horn Mounting Bracket For Honda CB500F 13-15 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $22.99 HMT.01.10100
BIKE-SPECIFIC HORN MOUNTS Horn Mounting Bracket For Indian Scout 15-17 & Scout Sixty 15-17 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $18.99 HMT.25.10000 Horn Mounting Bracket For Kawasaki Concours GTR1400 08-16 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. Note: This mount does not work for the California-spec GTR1400, as the emissions charcoal canister obstructs the horn mounting point. $19.99 HMT.08.10000 Horn Mounting Bracket For Kawasaki KLR650 08-16 This sleek mount offers a clean and simple mounting solution for the DENALI SoundBomb Compact Horn, tucking the horn inside the right front fairing. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $12.99 TWT.HMT.08.004.100 Horn Mounting Bracket For Kawasaki Versys 650 10-14 This horn mount offers a clean and simple mounting solution for the DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. Note: This mount will not fit the California model without removing the special emissions package, which is not recommended. $24.99 HMT.08.10200 Horn Mounting Bracket For Kawasaki Versys 1000 LT 15-16 DENALI SoundBomb Split Horn. The sturdy, black powder-coated steel brackets provide a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $25.99 HMT.08.10100
BIKE-SPECIFIC HORN MOUNTS Horn Mount For KTM 1190 Adventure, 1190 Adventure R & 1290 Super Adventure DENALI SoundBomb Split Horn, positioning the horn in front of the right-side engine case. Fits the KTM 1190 Adventure 13-16, 1190 Adventure R 13-16, and 1290 Super Adventure 15-16. $19.99 HMT.04.10000 Horn Mounting Bracket For Suzuki DL650 V-Strom 04-16 & DL1000 V-Strom 02-12 This smart and simple mounting solution for the DENALI SoundBomb Compact Horn tucks the horn inside the fairing, on the right-side upright of the tubular fairing stay. All necessary hardware and installation instructions are included. This bracket may work with other applications using a 17mm- 19mm round pipe. $14.99 HMT.05.10100 Horn Mounting Bracket For Suzuki DL1000 V-Strom & DL1000 V-Strom Adventure 14-16 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $17.99 HMT.05.10200 Horn Mounting Bracket For Triumph Tiger 800 10-14 & Tiger 800 XC 10-14 This sleek horn mount offers a clean and simple mounting solution for the DENALI SoundBomb Compact Horn. The sturdy, black powdercoated steel bracket provides a durable finish and a factory look. Note: This mount is not compatible with the OEM crash bars. $19.99 HMT.11.10300 Horn Mounting Bracket For Triumph Bonneville, T100 & Thruxton 900 This sleek horn mount offers a clean and simple mounting solution for the DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. Fits the Triumph Bonneville 07-16, T100 07-15, and Thruxton 900 04-15. $31.99 HMT.11.10500
BIKE-SPECIFIC HORN MOUNTS Horn Mounting Bracket For Triumph Tiger Explorer 1200 12-15 This sleek mount offers a clean and simple mounting solution for the DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. Fits the Triumph Tiger Explorer 1200 12-14, Explorer ABS 15-16, Explorer XC ABS 15-16, and all 2017 versions of the Tiger Explorer XC and XR. $24.99 HMT.11.10100 Horn Mounting Bracket For Yamaha Bolt, Bolt R-Spec & Bolt C-Spec 14-16 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $21.99 HMT.06.10100 Horn Mounting Bracket For Yamaha XT1200Z Super Tenere 11-16 DENALI SoundBomb Compact Horn. The sturdy, black powder-coated steel bracket provides a durable finish and a factory look. All necessary mounting hardware and installation instructions are included. $19.99 HMT.06.10000
POWER BLOCKS AND ACCESSORIES PowerHub2 Fuse Block, Master Ground Block And Wiring Harness This distribution module lets you safely connect up to six electronic devices to your bike without melting your battery. Each output can be set as always-on or switched-on with the motorcycle ignition. Size: 3 L x 4 W x 1 H 6 circuits can handle up to 15 amp (180w) each CANbus-compatible 60 long 10 gauge wiring harness $129.99 ELC.00.30000 Power Plug For BMW GPS Connector Use this CANbus safe adapter to install 12V accessories without having to tap, cut, or solder any OEM wiring. The pre-installed posi-lock connector is fed by a switched circuit, so your added accessories will only draw power when the ignition is turned on. $41.99 DNL.WHS.10000 194 Marker Bulb Plug-And-Play Trigger Wire Adapter This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW, Ducati, and other European motorcycles with a CANbus electrical system and a City Light 194 marker bulb in the headlight. $31.99 EC.02350
GO Farther, See More, Explore www.denalielectronics.com +1 401-360-2550