GMC MARITIME AS MARINE EQUIPMENT RENTAL CATALOGUE 19.06.2018 Page 1
GMC Maritime can offer a wide range of rental equipment and operational personnel from our base located in Stavanger and other sites in Norway. The equipment shown on next pages is offered to customers for rental and sale. The catalogue presents most of our rental equipment, in addition GMC can offer a large range of other equipment for marine operations and mechanical work. Please contact us for requests of equipment other than what is presented in the catalogue. All equipment are organized in our ERP system which keep track of equipment and have all information needed of the objects including condition, certification status and location. This makes us able to have very short response time and prepare the requested equipment on time according to our customers needs. GMC Maritime AS Division office: Jåttåflaten 11, Jåttåvågen Hinna 4020 Stavanger, Norway Products Division Telephonme: +47 51 84 80 00 24 hours tel.: +47 90067549 sales@ www. 19.06.2018 Side 2
Index Equipment Page Equipment Page Equipment Page Equipment Page A frames 4 Chock Panama 15 Load cells 27 Triplates and Roundel plates 40 Anchors 5 Chutes 16 Masterlinks 28 Turnbuckles 41 Barges 6 Containers 17 Pile lifting tool 29 Turnpoints 42 Baskets 7 Cranes 18 ROV shackle / hook 30 Waterbags 43-44 Blocks & sheaves 8 Fairleads 19 ROV pumps 31 Weights Clump 45 Bollards 9 Fenders 20 Shackles 32 Winches 46-48 Brackets 10 Gangways 21 Sheaves 33 Wire and grommets 49 Buoys 11 Generators 22 Spooling machines Reel Drive System 34-36 Wire grippers 50 Chain & kenters 12 Grappnels 23 Swivels 37 Chain hoists 13 HPU s 24 Trailers air / manual 38 Chain stoppers 14 Lifting beams 25-26 Tractor 39 19.06.2018 Side 3
A-FRAMES A-frames with capacity from 1 ton up to 250 ton for deck installation or temporary lifting operations. 5 Ton A-frame 6 x 2.8 m 36 Ton A-frame 7.2 x 3.85 m 250 Ton A-frame 19 x 15 m 19.06.2018 Side 4
ANCHORS A wide range of anchors in different sizes up to 65 T with holding capacity up to 50 times own weight. Suction anchors. Union stockless 23 ton Vryhof Stevpris 51 ton Suction anchor 11.5 x ø3.4m 19.06.2018 Side 5
BARGES 12 barges are in our rental fleet. Two sizes: 14,5 x 20 meter and 12 x 12 meter. Some barges comes with lifting point and can be used as test weight with capacity from 70 to 800 ton. AP barge12 X 12 meter. TB barge14,5 X 20 meter. TB Barge used for 800 T load test 19.06.2018 Chain stopper on TB barge. Side 6
BASKETS A wide range of baskets for many purposes: Subsea baskets - Equipment baskets - Personnel baskets - Garbage baskets 7 x Subsea baskets 11,5 x 4,1 x 3 m (LxWxH). Payload 36 ton 2 x Subsea baskets 3,6 x 3,7 x 3 m (LxWxH). Payload 175 ton Garbage basket Personnel baskets Equipment basket 19.06.2018 Side 7
BLOCKS Snatch blocks, Fixed blocks, Hook blocks 19.06.2018 Side 8
BOLLARDS Double bollards 98 Ton MBL for deck installation. 19.06.2018 Side 9
BRACKETS 50 and 100 Ton towing brackets 19.06.2018 Side 10
BUOYS A wide range of surface and subsea buoyancy modules: 13 kg to 25 kg spherical subsea buoys 120 and 250 kg buoyancy modules. 1200, 2400 and 3500 kg buoyancy modules. 14000 kg surface buoys Subsea buoys up to 10 ton @ 500 MWS. We also make special arrangements to join different buoys to get the required net buoyancy. 14000kg surface buoy 250kg modular buoys, 1500msw 1200kg modular buoys, 320msw 3500kg modular buoy, 66msw 2400kg deep sea buoy, 335msw Spherical buoys, 500 & 1000msw 19.06.2018 Side 11
CHAIN FOR MOORING 14000 meter offshore stud K3 / R4 anchor chain, up to 120 mm diameter. 19.06.2018 Side 12
CHAIN HOISTS AND TROLLEYS Airdriven, Electric, Hydraulic and Manual hoists and trolleys, capacity 0,5 100 T. Standard and lowhead room. 19.06.2018 Side 13
CHAIN STOPPERS Ratchet and fixed chain stoppers 19.06.2018 Side 14
CHOCKS Panama chocks for deck mounting According to DIN 81915 C20 and C32 on stock, other types and sizes on request 19.06.2018 Side 15
CHUTES Chutes for guiding of wire, rope or umbilical from vessel to sea 19.06.2018 Side 16
CONTAINERS Tool & Equipment containers - Storage containers - Office containers - Standard ISO containers and DNV 2.7-1 19.06.2018 Side 17
CRANES FOR DECK INSTALLATION Various cranes for installation on vessels or quay Offshore deck crane 5 T @ 20 meter Folding crane 1 ton @ 8 mtrs 19.06.2018 Side 18
FAIRLEADS Fairleads for deck installation to guide wire, rope, cable or umbillical 19.06.2018 Side 19
FENDERS Fenders for several purposes with different characteristics and dimensions. Rubber-, air filled- and foam filled fenders. Some of our fenders is listed below: - Chain Tyre Net Foam Filled L5.0m ø=2.9m, weight 2900kg - Trelleborg CRP foam filled fenders L2.5m ø=1.2m, weight 395kg - Sampson fenders L3,2m ø=2,7m, weight 1200kg - Yokohama fenders L5,0m ø= 2,8m, weight 1400kg Chain tyre net foam filled fender Fenders in use Sampson fender Trelleborg CRP foam fenders Yokohama fender Rubber protectors 19.06.2018 Side 20
GANGWAYS A wide range of certified gangways in different sizes. 19.06.2018 Side 21
GENERATOR SETS A wide range of dieseldriven generator sets for supply of electric power. 190 KVA generator 400 440 Volt 50/60 hz 200 KVA generator 380 480 Volt 50/60 hz 250 KVA generator 380 480 Volt 50/60 hz 400 / 500 KVA generator 400 440 Volt 50/60 hz 19.06.2018 Side 22
GRAPNELS Grapnels for fishing chain, wire, cable, rope or umbillical BEL 139 Grapnel, capacity 250 Ton, tested to 350 Ton 19.06.2018 Side 23
HYDRAULIC POWER PACKS Electric and diesel driven hydraulic power packs for operation of winches, pumps, etc. 80 kw zone 2 electric HPU 2 x 55 kw twin safe area electric HPU *This is some of our HPU s 63 kw safe area diesel HPU 19.06.2018 Side 24
SPREADER BEAMS GMC has different sizes of spreader beams for all your lifting operations. Can come single or rigged with shackles, wires and master links. Standard capacity up to 600 T, specials up to 2000 T. Racks with various spreader beams 19.06.2018 Side 25
SPREADER / LIFTING BEAMS Below spreader / lifting beams are available for rental, minimum rental period is 3 days week. Special spreaders / lifting beams up to 2000 Ton capacity on request. Comes with control card / certificate, beams can be equipped with wires and shackles according to your requirement. Quantity Description SWL Ton 2 LIFTING FRAMES 9 1 SPREADER BEAM 2.9M 15 1 SPREADER BEAM 2.5M 15 1 SPREADER BEAM 2.7M 20 1 LIFTING FRAME 25 1 SPREADER BEAM 2.73M 29 1 SPREADER BEAM 2.05M 30 1 SPREADER BEAM 2.5M 30 5 SPREADER BEAM 6.2-5.55M 35 1 SPREADER BEAM 3.8M 35 1 SPREADER BEAM 6.2M 40 1 SPREADER BEAM 2.8M 40 1 SPREADER BEAM 3.05M 40 1 SPREADER BEAM 2.6M 50 1 SPREADER BEAM 3.05-4.45M 60 3 SPREADER BEAM 3.62M 75 1 SPREADER BEAM 4M 80 1 SPREADER BEAM 4.5M 90 1 SPREADER BEAM 3.6M 90 1 SPREADER BEAM 1.78M 93 1 SPREADER BEAM 10.33M 115 3 SPREADER BEAM 2,25MTR 150 1 SPREADER BEAM 4.1M - 15M 150 1 SPREADER BEAM 5,17M 250 1 SPREADER BEAM 3.8M 270 1 SPREADER BEAM 12M 450 1 SPREADER BEAM 13.4M 400 1 SPREADER BEAM 20M 400 2 SPREADER BEAM 5.5m 600 4,5M, capacity 90T 1,78M, capacity 93T 2,05M, capacity 30T 4,1-15M, capacity 150T Lifting beams up to 2000 Ton on request 5,5M, capacity 600T 3,8M, capacity 35T 19.06.2018 Side 26
LOAD CELLS, LOAD SHACKLES AND RUNNING LINE MONITORS Capacity up to 1250 T. Comes with calibration certificate. Load shackles radio controlled Load links radio controlled Running line monitor radio controlled Subsea load shackle cable controlled 19.06.2018 Side 27
MASTERLINKS A wide range of Masterlinks with SWL up to 400 Ton. 19.06.2018 Side 28
PILE LIFTING TOOL 50 Ton capacity lifting tool for pulling of piles, with ROV operated locking. 19.06.2018 Side 29
ROV SHACKLES AND HOOKS Capacity from 25 to 500 T 19.06.2018 Side 30
ROV suction pumps Capacity: 48 m3/hour @ 150 m.v.s (15 bar) Motor: Volvo F12-40 Speed: 3600 rpm Hydraulic required: 148 l/min @ 202 bar Inlet: DN100 Outlet: DN100 Material: AISI 316 Shaft seal: Mechanical Burgman Sic/Sic Weight: 75 kg Base: AISI316 Suction / jetting hose assembly 19.06.2018 Side 31
SHACKLES Standard shackles, Wide Body, D-type and specials with capacity up to 1250 T 19.06.2018 Side 32
SHEAVES Standard sheaves and deck sheaves with capacity up to 250 T 19.06.2018 Side 33
SPOOLING SERVICES GMC provide comprehensive spooling services of wire-rope, cable, fiber rope or similar. Spooling machines in different sizes combined with trained and experienced personnel can handle wire rope and umbilical up to 250 ton drum weight. GMC`s controlled spooling services deliver accurate and efficient spooling results, up to a maximum of 30 ton back tension, reducing the likelihood of problems with incorrectly spooled wire-rope on winches. Our equipment fits onto lorry, and can be set up at your preferred location worldwide, or at one of our bases in Norway. Also available: Atex approved machines for use in Atex zone 2. Remote operated spooling machine, with separate wire guide for spooling onto cable drums. Powered by diesel HPU, installed in separate 20 container. The spooling machine s operating speed is max 5 rotation /min. when spooling in and max 10 rotations/min when spooling out. 19.06.2018 Side 34
SPOOLING MACHINES Change of anchor wire for «Safe Caledonia», drum 60T, 15T back tension 19.06.2018 Side 35
SPOOLING MACHINE / REEL DRIVE SYSTEM (RDS) RDS is designed to handle wirerope, fibre rope or umbilical on transport reels. The system pay out / spool in on drums weighing up to 150 Tons. The system is ideal to operate with wire grippers (page 43) or linear winch to ensure controlled handling of the material. RDS consist of two separate units; motor side and free side each to be mounted on grillage/frame (can be offered on request). RDS can handle reels with sizes typically up to 6 meters in diameter and 6 meters width; but can also accommodate bigger reels with special designed grillage. The RDS is perfect for installing mooring lines on vessels and barges. Technical Info: Max weight of reel: 150 Tons Supply 380 Volt, 50 hz, 7.5 kw, IP56 Max diameter/width of reel: Any dim. depending on grillage Weight/dims (LxWxH) motor side: 6.0 T / 250x142x317 cm Weight/dims (LxWxH) free side: 4.5 T / 250x110x306 cm Drive force pull: 5 Ton Transport dimensions (LxWxH): 520x295x310 cm 19.06.2018 Side 36
SWIVELS Swivels Suitable for frequent rotation under load, capacity up to 200 ton 19.06.2018 Side 37
TRAILERS Transport trailers for heavy load, airdriven or manual, capacity up to 50 ton 19.06.2018 Side 38
TRACTOR Tractor for onshore operations 19.06.2018 Side 39
TRIPLATES Triangle plates for towing or load distribution, capacity up to 700 ton 19.06.2018 Side 40
TURNBUCKLES Turnbuckles used to shorten or expand wirerope or chain assemblies 19.06.2018 Side 41
TURNPOINTS Turnpoints for subsea use to redirect pipes, cables and similar 3 Ton turnpoint ø1524 mm 1.5 Ton turnpoint ø2000 mm 19.06.2018 Side 42
WATER BAGS GMC has a wide range of water bags with single units up to 100 Tonne. The water weights have a space saving design and are used for testing of cranes, winches or other equipment. Shackles, master link and fluid transfer fittings comes on each waterbag. Water bags are foldable for easy storage and transportation. Capacity: 2, 5, 10, 20, 35, 50 and 100 Ton single waterbags CAPACITY SIZE WEIGHT Tonnes Empty & Rolled metres kg OVERALL SIZE WHEN FILLED Height Meter Diameter Meter 1 0.9 0.56 0.56 23 2.3 1.2 2 1 0.6 0.6 45 3.5 1.6 2L 1 0.6 0.6 40 2.1 1.9 3 1.03 0.6 0.6 65 4.2 1.9 5 1.07 0.7 0.7 100 4.6 2.0 5L 1.07 0.7 0.7 95 2.5 2.7 10 1.1 0.8 0.8 135 5.8 2.5 12L 1.2 0.8 0.8 140 4.0 3.0 20 1.1x1x1 230 5.8 3.5 35 1.7 1.2 1.2 340 7.0 4.2 50 1.6x1.4x1.5 450 6.0 4.5 100 2.8x2.0x2.0 950 7.9 5.5 19.06.2018 Side 43
WATER BAGS FOR LIFEBOAT TESTING GMC life boat testing kits can be used to apply an evenly distributed load to a lifeboat or any other object that has to be proof loaded. Depending upon the required proof load, a number of water bags have to be spread evenly in the life boat and connected to the manifold. The bags have to be filled to their maximum capacity, this way you can be sure of the total weight, as the manufacturer guarantees a filled weight of 375 kg with a tolerance of 1%. These specially designed Life boat testing bags of 375kg each are part of a complete life boat testing set. A remote system with a manifold and filling hoses, allows proof load testing to be conducted safely, without entering the craft in the dangerous overload situation. The GMC life boat proof load testing set can also be used for load testing of gangways and small bridges.
WEIGHTS FOR LOAD TESTING STEEL / CONCRETE GMC has a wide range of clump weights up to 800 Tonne per unit. The weights have a space saving design and are used for testing of cranes, winches or other equipment or as a fixed point on sea bed. Basket with 30kg steel weights Clump weights capacity from 5 to 100 T 3 x Clump weights - 170 Ton each Testbaskets with steel weights from 1 to 250 T Large test beds 50 450 T Barge test weight 70 800 T 19.06.2018 Side 45
WINCHES & EQUIPMENT Manual, airdriven or electric lifting and pulling winches including associated equipment for long and short term rental. Capacity from 500 kg to 200 ton, see below a selection of our equipment. For more winch details, contact us for our winch rental catalouge. 5 Ton manual winch 50 T holding 20 Ton trailer winch 30 Ton lifting winch 75 Ton lifting winch 200 Ton lifting winch Diesel and electric Power packs Fairleads, Sheaves and Blocks Running line monitors and load cells 19.06.2018 Side 46
WINCHES & EQUIPMENT 15 Ton subsea winch with integrated suction anchor and swivel plate 19.06.2018 Side 47
WINCHES & EQUIPMENT 5 Ton subsea pull in winch Description Horizontal pulling force @ 210 bar Speed @ 15 liter / min @ 140 bar Capacity 5 Ton 60 m/min Operation hydraulic oil Tellus 32 Max water depth Rope capacity (11 mm Dynex Dux 75 or similar) Total weight in air Total weight in water Winch dimensions L x W x H 2000 meter 20 Meter 122 kg 81 kg 609 x 490 x 402 mm 19.06.2018 Side 48
WIRE Wiresling, pennants, china fingers and grommets in different sizes. 19.06.2018 Side 49
WIRE GRIPPERS These grippers are specially designed to hold sheathed spiral strand up to 167 mm diameter. The length and shape of the interchangeable inserts are calculated and designed to limit the radial pressure to 25 N/mm 2 (3550 psi). The inserts have a smooth surface and a large radius. The cable can be removed by the top (opening gripper) with easy handling, but cable socket will not be able to pass through the gripper. The machines will act as linear winch in conjunction with deck winch. Characteristics: 19.06.2018 Side 50
SUMMARY OF EQUIPMENT AVAILABLE FOR RENTAL Mooring equipment Chain Wire Anchors Chasers Grapnels Barges Gangways Towing gear Shackles Wiregripper Subsea Buoys Buoyance modules Marine equipment Fenders Fairleads Panama chocks Bollards Project equipment HPU s Generators Pumps Compressors Lifting equipment Winches Cranes A-Frames Spooling machines Reel Drive System Power Packs Loadcells Load Shackles Shackles Test weights Waterbags ROV shackles & hooks ROV pumps Masterlinks Snatch blocks Sheaves Wireslings Wiregrommets Softslings Personell Baskets Equipment baskets Subsea Baskets Containers Workshop containers Please contact us for more information of our equipment on sales@ Contact persons: Eirik Mikalsen / +47 900 67 549 / eirik.mikalsen@ Rune Christensen / +47 908 48 050 / rc@ Erik Espedal / +47 971 03 184 / erik.espedal@ 19.06.2018 Side 51