Datasheet v2.0-1115 5 or 2,5 kw power output World-leading efficiency +45% No preventive maintenance Extended runtime operation Simple installation and autonomous operation Methanol hybrid systems. The Reformed Methanol Fuel Cell system works in parallel with an onsite external battery pack existing on site or installed with the system. The embedded charge controller enables regulated DC power for all applications and battery types. The RMFC features catalytic startup enabling fast startup and minimum power consumption in standby and during the startup process. Methanol fueled. High temperature PEM with an integrated methanol reformer for onsite hydrogen generation enables high power density and high fuel energy density. The fuel is a methanol mix fuel readily available through several global suppliers. The integration of fuel cell and reformer enables a highly energy efficient system due to reuse of fuel cell waste heat for the reformation process. Multiple applications. The Methanol power system has multiple applications both off- or on-grid including application in critical backup power, temporary power or continuous power. Simple Retrofit integration. Based on a simple rack mounted design the system can be integrated in existing infrastructure or in generic generator cabinets as well as vehicles and other special applications. The system is ideal for Rooftop sites or other challenging installations as no cranes or special equipment is needed. The unit can be transported and mounted with simple equipment by typical technicians in less than one hour.
Specifications Electrical characteristics Parameter Cells 65 120 Power output [W] 2500 5000 Voltage output [V DC ] LV: 48 (or HV: 350-400) Turn down [%] 0-100 Operation Parameter Fuel mix 60% vol methanol 40% vol deionized water Fuel consumption [L/kWh] 0,8-0,9 Ambient temperature [ C] -20 to 50 Installation temperature [ C] 0 to 40 Mechanical characteristics Parameter Height - [mm] / Rack Units [U] 266 / 6U Width [in] 19 Rack size Length 1 [mm] 702 Weight [Kg] 65 75 Volume [L] 81 1 Length excluding connectors on front and exhaust pipes on rear Customised. The stack/module design is also available in custom sizing from 40 to 120 cells, so if there is a specific power demand the basic concept is easy to scale on a technology level. Furthermore larger systems are available for higher power ranges. Serenergy also offers support in form of application engineering and a complete system design to ensure performance and simplicity is maintained throughout the product development process. Please contact us at sales@serenergy.com for more information, pricing and availability. Serenergy A/S reserves the right to change specifications and descriptions without notice AUX in/out CAN USB UDP/LAN PROCESS EXHAUST BATTERIES 48V HOT AIR APPLICATION FILTER FUEL TANK Water/Methanol 40/60 % vol HEAT EXTRACTION (optional) AIR system diagram Process exhaust Ø60mm Hot Air Ø80mm 266mm 483mm (19 racksize) 702mm (753-767mm w. connections) 442mm Top: Front view of 48V-version. Views below: 48V-version (same dimensions for all versions) Lyngvej 8 tel: +45 8880 7040 DK-9000 Aalborg e-mail: info@serenergy.com Denmark www.serenergy.com
Datasheet v1.0-0715 Methanol fuel cell solution From 2,5 kw to 10 kw - 48V DC No preventive maintenance 200 L fuel capacity Climate independent operation Simple installation and refueling Outdoor cabinet. The Outdoor cabinet offers a complete power supply solution incorporation the H3-series of Reformed Methanol Fuel Cell systems and auxiliaries such as; Fuel tank, battery pack, power distribution and wireless communication for remote monitoring. The cabinet can be packed to reduce shipping size and simplify the installation process. Methanol hybrid systems. The Reformed Methanol Fuel Cell system works in parallel with an onsite external battery pack existing on site or installed with the system. The embedded charge controller enables regulated DC power for all applications and battery types. The RMFC features catalytic startup enabling fast startup and minimum power consumption in standby and during the startup process. Methanol fueled. High temperature PEM with an integrated methanol reformer for onsite hydrogen generation enables high power density and high fuel energy density. The fuel is a methanol mix fuel readily available through several global suppliers. The integration of fuel cell and reformer enables a highly energy efficient system due to reuse of fuel cell waste heat for the reformation process. Multiple applications. The Methanol power system has multiple applications both off- or on-grid including application in critical backup power, temporary power or continuous power
Specifications Performance characteristics Parameter Config 1 Config 2 Config 3 Config 4 Config 5 Config 6 Config 7 Modules Battery pack Battery pack Power output, electrical [kw] 2,5 5 2,5 5 7,5 5 10 Runtime (100% load) 4 days 2 days 4 days 2 days 1,5 days 2 days 1 days Operational characteristics Parameter Fuel mix Load 50% 75% 100% Fuel consumption [L/kWh] 0.8 0,85 0,9 Voltage output [V DC ] 48 Ambient temperature [ C] -20 to 50 Communications Optional Fuel characteristics Fuel tank capacity [L] 200 Fuel mix Mechanical characteristics W x D x H [mm] 850 x 1250 x 1500 Weight 1 - shipped/operation 2 [kg] 235 / 520-605 Volume [L] 1594 Filter type AUX in/out, UDP/LAN, HTML5 Wireless remote monitoring, LCD 60% vol methanol /40% vol deionized water Fuel energy capacity [kwh] 235 1 Dependent on configuration of H3-modules/batteries 2 Incl. modules, batteries, fuel 60% vol methanol /40% vol deionized water Z-line - M5 (487x537x96 mm) The Outdoor Cabinet design is available in custom configurations inducing: Fuel cell system, battery system, rectifier plant and DC distribution. Serenergy also offers support in form of solution engineering and methanol fuel supply. Please contact us at sales@serenergy.com for more information, pricing and availability. Serenergy A/S reserves the right to change specifications and descriptions without notice. AIR POWER OUT CAN USB UDP/LAN AUX in/out OUTDOOR CABINET System diagram or EXHAUST FUEL TANK Water/Methanol 40/60 % vol or or Battery Front view Rear view Lyngvej 8 DK-9000 Aalborg Denmark tel: +45 8880 7040 e-mail: info@serenergy.com www.serenergy.com
Serenergy A/S Lyngvej 8 DK-9000 Aalborg Denmark Contact information Telephone: +45 8880 7040 E:mail: sales@serenergy.com Website: www.serenergy.com