EX1200-D Engine Gross Power : 7 kw (70 hp) Operating Weight ackhoe : 8 000 (238 0 E-front : 9 000 (20 300 Loading Shovel : 111 000 (2 00 ackhoe ucket PCS (1:1) Heaped : 3.0. m 3 (3.92 8.0 yd 3 ) CECE (2:1) Heaped : 2.7.7 m 3 (3.3 7. yd 3 ) Loading Shovel ucket PCS Heaped :.9. m 3 (7.7 8. yd 3 )
NEW GINT OFFERS TRUE VLUE Within the huge Hitachi EX1200 you'll find all the essentials of a truly outstanding machine. Rest assured that like all Hitachi equipment, the EX1200 has been designed for safety, productivity, durability and comfort. Hitachi has blended the latest technology with tough performance to create what it calls the "New Giant" that is ready to take on the excavating needs of today and tomorrow. 2 3
New Giant Offers True Value HIGHER PRODUCTION More Powerful Engine The source of the high production. The EX1200 is equipped with a powerful large-displacement engine. n intercooler is used to provide optimal fuel efficiency, helping to keep total running costs down. 12 kw (0 PS) 7kW(70 hp) (EX10-3) 1 ucket Passes to Dump Trucks Maximum Payload ody Capacity ( SE 2:1 ) Heaped ackhoe (E). m 3 (8. yd 3 ) Loading Shovel. m 3 (8. yd 3 ) HITCHI EH00 3. US ton 21.0 m 3 (27.yd 3 ) 3 or 3 or HITCHI EH70 2. US ton 27.7 m 3 (3.3yd 3 ) or or Combined Front Operations Fast and efficient operation. The popular Optimum Hydraulic System (OHS) is used along with the newly developed arm regenerative and boom regenerative mechanism for smooth and efficient front operations. Larger ucket Provides high work capacity. The large capacity bucket offers an increased excavating power-to-bucketwidth ratio. The result is increased work efficiency for higher production. ackhoe bucket: E bucket: More Powerful Excavation Increased power for excavating. The powerful engine is combined with a highly efficient hydraulic system to offer the excavating power for even the toughest sites. Maximum Excavating Force 9.1m (29' ") boom/ 3.m (11' 2") arm with general purpose bucket Rock bucket 7kN( 00 f,2 700 lbf) 7kN(8 00 f, 700 lbf) 7.m (2' 9") E-boom/ 3.m (11' 2") E-arm with general purpose bucket Rock bucket 3.0 m 3 (3.92 yd 3 ). m 3 (7.32 yd 3 ).0 m 3 (. yd 3 ). m 3 (8.0 yd 3 ) 0 kn( 0 f,123 700 lbf) 0 kn( 0 f,123 700 lbf) E/P Control Provides a balance between economical operation and power. Speed sensing control is used to efficiently control engine output. This system incorporates a microcomputer to regulate engine and hydraulic pump output to the level of work being performed. Quick idle switch S/P mode increases productivity Choose the S/P mode to boost power during strenuous operation. E mode reduces fuel consumption This mode lowers fuel consumption during light-duty operations. uto Idle and Quick Idle Help to reduce fuel consumption even more. Heavy Lifting Function Increases boom lift performance by %. touch of a button gives the added power for breaking up rock or working under harsh conditions. % Increase
oom and rm Designed for durability. box-section structure has been adopted on the front attachment for its large cross-sectional area. In addition, bulkheads arranged inside the front attachment increase rigidity to resist torsion, further strengthening the structure. The enhanced durability will be especially welcome for extended operation at tough work sites such as mines. E-front with.m 3 (7.32yd 3 ) Rock ucket Larger thicker bracket oss lubrication type Larger center boss ulkhead Larger pin diameter and boom foot width Under-plate Protection special plate and square bars are used to help prevent arm denting. The damage prevention plate, fitted with reinforcing square bars, is installed as standard on the arm. This protects the arm bottom from damage from loaded rocks. [(For machines with 3. m (11 2" ) E-arm and 3. m (11 2" ) arm only)] Large Displacement Engine with Low Operating RPM Provides a reliable power source. The large-displacement engine with power to spare will provide a long service life. Independently Mounted Oil Cooler Reduced heat helps increase hydraulic component durability. The oil cooler and the radiator have been mounted in separate locations to reduce heat build up and increase cooling efficiency. Lower hydraulic oil temperature helps to increase the durability of hydraulic components. New Giant Offers True Value 2 Larger pin diameter and wider arm mount width Plate and square bars to help prevent arm denting large pin diameter is used and a wear-resistant plate has been added to the sides of the arm at the arm end boss section. Pin service life has been extended by using a floating pin. STRONG FRONT RM New Giant Offers True Value 3 STRONG UNDERCRRIGE Giant Undercarriage Forming the base for powerful operation. The large undercarriage, mm (1 1") wide and mm (21 0") long, provides stability. Rugged Travel Device Damage-resistant travel device keeps the Giant moving. The shape of the frame has been changed and thicker steel plates have been used to boost durability and reduce downtime from damage. Track Center Frame uilt for high reliability. The mounting section for the track center frame swing gear has an integral cast steel design to reduce the concentration of stress forces, thereby boosting reliability. Cast steel Rock ucket [(.0m 3 (.yd 3 )/.m 3 (7.32yd 3 ) rock bucket] Designed for harsh work conditions. Reinforced bucket designed specifically for withstanding the impact encountered when handling crushed rock.. m 3 (7.32 yd 3 ) Rock ucket Reinforced Pin Section To provide a long service life to the arm end. Replaceable wear-resistant plate at the arm tip boss. [(For machines with 3. m (11 2" ) E-arm, 3. m (11 2" ) and. m (1 9") arm)] rm tip pin converted from fixed type to floating pin, extending service life. [(For machines with 3. m (11 2" ) E-arm and 3. m (11 2" ) arm only)] Wear plate Two-layer wear plate. Reinforced bucket corner Large bucket teeth for quarry operations Double-linked side shroud Cutting edge shroud ESCO SUPER 12C Floating pin Floating pin 7
New Giant Offers True Value ESY MINTENNCE HELPS REDUCE TOTL LIFETIME COST Easy Inspection and Maintenance Wide access helps speed essential inspection time and reduce maintenance costs. Plenty of room is provided for performing inspections. Key components have been centrally positioned and walkways have been provided to make inspections and maintenance as easy as possible. uto-grease Lubricator Reduces the time and effort needed for lubrication. n auto-grease lubricator is standard equipment. It dramatically reduces the work required for lubricating. (Does not lubricate the bucket area or the swing gear.) MCHINE INFORMTION CENTER MIC (Machine Information Center) continuously records performance of the engine and the hydraulic system. The record can be downloaded to a PD. Download PD Summary Report Data Diesel engine Pump drive unit Hydraulic pump x Hydraulic oil tank Fuel tank Radiator ir cooler Oil cooler Control valve Swing control valve Center joint Hydraulic filter attery Lubricator Cab ir conditioner Center walkway Electric Lubricator Provides easy lubrication of key areas. The standard electric lubricator speeds the lubrication of the bucket area and the swing gear. Center walkway Wide Inspection Doors Easy access to engine and pump compartments. The inspection doors open wide to provide easy access to the engine and pump compartments. utomatic Dust Ejector irbourne dust and particles are seperated then ejected automatically, extending cleaning and replacing interval. Toolbox space Radiator and Oil Cooler Designed for easy cleaning. 8 9
New Giant Offers True Value UNCOMPROMISING SFETY Other Devices for Safety djustable Headlights Provides bright illumination where it is needed. The headlights above the cab can be adjusted downward to shine light on the work area. Pump bulkhead Cleaner Operating Engine Steps have been taken to reduce harmful exhaust gas emissions. Step Light Equipped with shut-off timer. The step light has a one minute shut-off timer. This allows the operator to use the ladder before the step light is turned off. ENVIRONMENTLLY FRIENDLY Retractable seat belt This engine is equipped with an electronic governor and meets strict EP standards. Pilot-control shutoff lever Right window guard Plastic Parts Marked for Recycling Striving for environmental friendliness. The plastic parts indicate the type of plastic used to help speed recycling. Fuse box TRNSPORTTION WEIGHTS OF MJOR COMPONENTS Rugged Pressurized Cab with Integrated Headguard Offers solid protection to the operator. Emergency evacuation hammer The operator s cab meets strict ISO Operator Protective Guards (OPG) Level II standards. The cab structure is formed from an integral internal frame that is designed to resist operating vibration. It stands ready to protect the operator from falling objects. Weights Major components Wide Sidewalks and Large Handrails Wide sidewalks with handrails are provided at key locations for easy access to the cab and simplified servicing. Handrails conform to EN (European Norm), a world-class safety standard. Main frame assembly : backhoe : loader front Track side frame assembly : left : right Counterweight Radiator cover Oil cooler cover 900 00 00 00 00 93 8 (7 (7 (32 (32 (38 ( ( 700 00 200 200 00 20 187 70 181 0 080 970 0 90 30 170 ( 1 ( (21 (20 (13 (13 ( 9 (1 ( 2 00 00 300 020 10 0 900 000 80 x 2 78 ( 1 1 200 (33 9 200 (20 1 170 ( 2 270 20 300 80 x 2 33 3 1 1 17 ackhoe Sidewalk assembly : left Sidewalk assembly : right oom assembly : 9.1 m (29 ") boom : 7. m (2 9") E-boom rm assembly : 3. m (11 2") arm : 3. m (11 2") E-arm ucket assembly :.0 m3 (. yd3) :. m3 (8.0 yd3) oom cylinders 9 9 1 Loading shovel Sidewalk assembly oom and rm assembly ucket assembly :. m3 (8.0 yd3) oom cylinders 11
New Giant Offers True Value PRODUCTIVE COMFORT Cab Size % Increase* * Compared to EX10-3 Large Comfortable Cab Provides comfort to reduce operator fatigue The cab is % larger than the previous model to provide an even higher level of comfort. It has been designed to offer clear visibility of the work area. Fluid-filled elastic mounts help reduce fatigue-causing vibration. Silicone oil Rubber One-Glance Instrument Panel Positioned within natural line of sight. Instrument panel is positioned so that all key operating conditions can be monitored with just a glance. i-level utomatic ir Conditioner utomatically keeps the operator's cab at a comfortable temperature. ll the operator has to do is set the temperature. The temperature, fan speed and discharge vents will be automatically controlled. i-level control is also available if the operator wishes to have one area of the cab cooler or warmer than the other. * Illustration shows a sample of the air flow during bi-level control. Well-Positioned Levers and Switches Levers and switches are near the operator to reduce the need to reach for them. The levers and switches have been strategically located to reduce the amount of operator movement required to operate them. Frequently used switches have been centralized at a location next to the operator. oom Mode Selector Helps to reduce shaking and jerking of body during scraping operations. The amount the body can be lifted or pulled by the front of machine can be selected. This helps to provide for more comfortable operation and contributes to longer component service life. Comfortable mode There is little lifting or pulling of the body so there is less vibration and shock. Powerful mode Much lifting and pulling of the body so there is more vibration and shock. 12 13
TECHNICL DT ENGINE WEIGHTS ND GROUND PRESSURE WORKING RNGES Model...Cummins QSK23 Type...Water-cooled, -cycle, -cylinder in line, turbo-charged direct injection chamber-type diesel engine. Rated power DIN 271, net...38 kw (731 PS) at 1 0 min -1 (rpm) SE J139, net...38 kw (721 hp) at 1 0 min -1 (rpm) SE J199, gross...7 kw (70 hp) at 1 0 min -1 (rpm) Piston displacement...23.1 L (1 12 in 3 ) ore and stroke...170 mm x 170 mm (.7" x.7") atteries...2 x 12V, 2 x 220 H HYDRULIC SYSTEM Main pumps...3 variable-displacement, swash plate type axial piston pumps Main. oil flow...3 x 9 L/min (3 x 130.8 US gpm, 3 x 8.9 lmp gpm) Pilot pump...gear pump Max. oil flow...3.0 L/min (1. US gpm,13.9 Imp gpm) Swing speed...8 min -1 (rpm) uckets Capacity PCS heaped (1:1) 3.0 m 3 (3.92 yd 3 ) 3. m 3 (. yd 3 ) 3. m 3 (.8 yd 3 ).0 m 3 (.23 yd 3 ). m 3 (.89 yd 3 ).0 m 3 (. yd 3 ).0 m 3 (. yd 3 ). m 3 (7.32 yd 3 ). m 3 (8.0 yd 3 ) CKHOE TTCHMENTS CECE heaped (2:1) 2.7 m 3 3.0 m 3 3.2 m 3 3. m 3.0 m 3. m 3. m 3.9 m 3.7 m 3 Without shroud 1 700 mm ( 7") 1 80 mm ( 0") 1 70 mm ( ") 1 20 mm ( ") 1 7 mm ( 7") 1 920 mm ( 11") 1 80 mm ( 1") 2 10 mm (7 0") 2 2 mm (7 3") : Rock bucket : General purpose bucket With shroud 1 800 mm ( 11") 1 90 mm ( ") 1 70 mm ( 2") 1 720 mm ( 8") 1 8 mm ( 11") 2 0 mm ( 11") 1 90 mm ( ") 2 20 mm (7 ") 2 3 mm (7 7") No. of teeth Weight 3 0 ( 830 3 20 (7 170 300 (9 80 10 (9 170 0 ( 20 90 (9 900 0 (12 00 (1 30 30 (1 000 ackhoe EX1200-D : Equipped with 9.1 m (29 ") boom, 3. m (11 2") arm, and.0 m 3 (. yd 3 ; PCS heaped) bucket Shoe type Shoe width Operating weight Ground pressure Double grousers 7 mm (28") 900 mm (3") 8 000 (238 0 1 000 (22 00 13 kpa (1.39 f/cm 2, 19.7 psi) 9 kpa (1.11 f/cm 2, 1.8 psi) EX1200-D E-front : Equipped with 7. m (2 9") E-boom, 3. m (11 2") E-arm, and. m 3 (8.0 yd 3 ; PCS heaped) bucket Shoe type Shoe width Operating weight Ground pressure Double grousers 7 mm (28") 900 mm (3") 9 000 (20 300 111 000 (2 700 137 kpa (1.0 f/cm 2, 19.9 psi) 9 kpa (1.12 f/cm 2, 1.0 psi) Loading Shovel Equipped with. m 3 (8. yd 3 ; PCS heaped) bottom dump bucket Shoe type Shoe width Operating weight Ground pressure Double grousers Type 7 mm (28") E-front 7. m (2 9") E-boom 3. m (11 2") E-arm 111 000 (2 700 139 kpa (1.0 f/cm 2, 20.2 psi) Materials density /m 3 (lb/yd 3 ) 9.1m (29 ") boom 3. m (11 2") arm. m (1 9") arm.8 m (19 0") arm oom length rm length Max. digging reach Max. digging reach (on ground) Max. digging depth Max. digging depth (8 level) C Max. cutting D Max. dumping E Max. vertical wall depth ucket digging force ISO kn (f,lbf) rm crowd force kn (f,lbf) Feet 0 Meter 1 12 3 30 2 8 C 20 1 0 2 0 D 2 EH70 1 20 2 30 ' E 8 3 ' 0 12 18 1 1 12 8 2 0 Meter 0 0 0 3 30 2 20 1 0 Feet SE:PCS ISO SE:PCS 7. m (2 9") E-boom 3. m (11 2") E-arm 13 70 mm ( 2") 13 380 mm (3 11") 7 90 mm (2 1") 7 820 mm (2 8") 12 300 mm (0 ") 8 020 mm (2 ") 080 mm (1 8") 0 ( 0, 123 700) 00 (1 000, 112 00) 12 (2 000, 92 00) 02 (1 000, 90 00) 9.1 m (29 ") 3. m (11 2"). m (1 9").8 m (19 0") 1 30 mm (0 ") 1 000 mm (9 3") 9 30 mm (30 8") 9 2 mm (30 3") 13 90 mm ( 3") 8 920 mm (29 3") 7 20 mm (2 0") 7 ( 00, 2 700) 18 (2 00, 93 900) 11 (1 900, 92 00) 02 (1 000, 90 00) 1 380 mm (3 9") 1 070 mm (2 9") 20 mm (3 2") 3 mm (33 ") 1 020 mm ( 0") 9 30 mm (30 11") 8 880 mm (29 2") 7 ( 00, 3 000) 18 (2 00, 93 900) 330 (33 700, 7 300) 32 (33 0, 73 000) 17 30 mm ( 11") 17 070 mm ( 0") 11 20 mm (37 ") 11 330 mm (37 2") 1 00 mm (7 3") 30 mm (3 0") 30 mm (3 0") 32 (33 200, 73 200) 293 (29 900, 900) 287 (29 300, 00) 28 (29 000, 3 900) Feet Meter 1 0 12 3 30 8 2 20 E 1 2 0 0 2 F 1 20 2 8 30 1 0 Min. digging distance Min. level crowding distance C Level crowding distance D Max. digging reach E Max. cutting E Max. dumping F Max. digging depth Working radius at max. G dumping H Max. bucket opening width Crowding force reakout force E' 12 0 3 EH70 30 C 8 2 H D 20 G 2 1 0 Meter 0 Feet ottom dump type 0 mm (1 8") 20 mm (21 ") 30 mm (1 3") 11 0 mm (37 ") 12 30 mm (0 ") 8 70 mm (28 8") 20 mm (17 2") 090 mm (20 0") 1 880 mm ( 2") 83 kn (9 00 f, 131 000 lbf) 89 kn (0 0 f, 132 00 lbf) LODING SHOVEL TTCHMENTS ucket (PCS heaped 2:1) Capacity.9 m 3 (7.7 yd 3 ) 2 mm (8 3"). m 3 (8. yd 3 ) 2 700 mm (8 ") : ottom dump type rock bucket : ottom dump type general purpose bucket OPTIONL EQUIPMENT Travel motion alarm device High cab kit (for ackhoe) Full track guard No.of teeth Weight Type Materials density 9 780 (21 00 1 800 /m 3 (3 030 lb/yd 3 ) 9 200 (20 300 1 800 /m 3 (3 030 lb/yd 3 ) DIMENSIONS Distance between tumblers Undercarriage length C Counterweight clearance D Rear-end swing radius D Rear-end length E Overall width of upper structure F Overall of cab: ackhoe : Loading shovel G Min. ground clearance H Track gauge I Track shoe width J Undercarriage width K Overall width L Track 000 mm (1 ") mm (21 0") 1 790 mm ( ") 80 mm (1 11") 70 mm (1 7") 380 mm (17 8") 320 mm (1 2") mm (17 9") 990 mm (3 3") 3 900 mm (12 ") 7 mm (28")/900 mm (3") mm (1 1")/ 800 mm (1 9") 30 mm (17 ") 1 70 mm ( 2") 1 1
TRNSPORTTION UPPERSTRUCTURE Upperstructure Weight: 33 900 (7 700 : 3 00 (11'") ssembly requires no welding. Counterweight Weight: 17 00 (38 00 : 3 0 (11'") 1 170 ('7") Side step Weight: 21 ( : 1 (") 1 300 ('3") Unit: mm (ft in) Sidewalk for backhoe Weight: 217 (78 : 1 020 (3'") 1 30 ('") LODING SHOVEL TTCHMENTS ucket 3 00 (11'") 3 ('") oom & arm assembly Weight: 1 200 (33 20 : 1 20 ('") 3 290 ('") Fender (Left rear side) Weight: 1 (317 : 798 (2'7") 770 (22'3") Fender (Left rear side) Weight: 10 (33 : (2'1") 870 (2'") Sidewalk for loading shovel Weight: 180 (397 : 1 00 (3'") 1 30 ('") 1 0 ('1") 32 (1'1") 2 30 (7'9") High cab kit for loading shovel (Optional equipment for backhoe) Weight: 90 (1 300 : 1 0 (3'7") 1 090 (3'7") 1 930 ('") acket capacity.9 m 3 (7.7 yd 3 ). m 3 (8. yd 3 ) mm (ft in) 2 770 (9'1") 2 770 (9'1") CKHOE TTCHMENTS mm (ft in) 2 80 (8'2") 2 80 (8'") Max. mm (ft in) 2 90 (8'") 2 890 (9'") Weight ( 9 780 (21 00 9 200 (20 300 oom cylinders Weight: 1 170 (2 80 0 (1'") 8 90 (28'") 3 20 (11'7") 1 30 ('") 1 30 ('") Muffler Cover Weight: 90.7 (200 : 1 390 ('7") Sidewalk Weight: 18 (0 : 192 (7.") Sidewalk Weight: 181 (00 : 83 (2'9") C oom ucket 1 830 ('0") Step for loading shovel Weight: 1 (320 : 1 00 (3'") UNDERCRRIGE 1 20 ('") 2 120 ('11") 790 (2'7") 1 0 ('1") Handrail Weight: 2 (82 : 80 (2'3") 1 020 (3'") Side frame Weight: 1 00 (32 200 x 2, : 7 (2'") (21'0") 1 20 ('1") 929 (3'1") Handrail Weight: (1 0 (2") 307 (1') 832 (2'9") 1 10 (3'") oom length 9.1 m EX1200-D (29'") EX1200-D E-boom rm EX1200-D EX1200-D E-boom 7. m (2'9") rm length 3. m (11'2"). m (1'9").8 m (19'0") 3. m (11'2") 9 00 mm (31'2") 7 90 mm (1'3") 830 mm (1'") 97 mm (19'7") 7 200 mm (23'8") 880 mm (1'0") 2 8 mm (9'3") 3 mm ('") 1 80 mm ('1") 1 700 mm ('7") 1 70 mm ('9") 1 80 mm ('1") C 3 0 mm ('2") 3 00 mm (11'2") oom cylinders Weight: 1 170 (2 80 x 2 90 mm (3'2") 90 mm (3'2") 98 mm (3'3") 90 mm (3'2") 1 0 mm ('9") 1 0 mm ('9") Weight 970 (13 10 300 (13 890 930 (13 070 0 (13 0 Weight 9 0 (21 300 9 080 (20 020 Capacity PCS heaped 3.0 m3 (3.92 yd 3 ) 3. m3 (. yd 3 ) 3. m3 (.8 yd 3 ).0 m3 (.23 yd 3 ). m3 (.89 yd 3 ).0 m3 (. yd 3 ).0 m3 (. yd 3 ). m3 (7.32 yd 3 ). m3 (8.0 yd 3 ) CECE heaped 2.7 m 3 3.0 m 3 3.2 m 3 3. m 3.0 m 3. m 3. m 3.9 m 3.7 m 3 1 890 mm ('2") 1 890 mm ('2") 2 300 mm (7'7") 2 280 mm (7'") 2 300 mm (7'7") 2 0 mm (8'1") 2 0 mm (8'") 2 30 mm (8'8") 2 7 mm (8'11") 2 3 mm (7'7") 2 3 mm (7'7") 2 80 mm (8'2") 2 80 mm (8'2") 2 80 mm (8'2") 2 20 mm (7'") 2 280 mm (7'") 2 20 mm (7'") 2 20 mm (7'") : Rock bucket : General purpose bucket 1 800 mm ('11") 1 90 mm ('") 1 0 mm ('9") 1 720 mm ('8") 1 8 mm ('11") 2 0 mm ('11") 1 90 mm ('") 2 20 mm (7'") 2 3 mm (7'7") Weight 3 0 ( 830 3 20 (7 170 300 (9 80 10 (9 170 0 ( 20 90 (9 900 0 (12 00 (1 30 30 (1 000 Type 0 (1'") Traction device cover Weight: 2 (3 x 2 : 330 (1'1") 830 (2'9") 1 10 (3'") 7 (2'") Radiator cover Weight: 93 (20 : 0 (3.9") 1 0 ('") 1 70 ('2") 1 30 ('") Steps Weight: 18 (0 x 2 : 12 (.9") (.1") 2 030 ('8") Oil cooler cover Weight: 8 (187 : 0 (3.9") 1 0 ('") 1 380 ('") Ladder Weight: 20 ( : 300 (11.9") 90 (3'1") 370 80 (1'3") (1'11") (2'1") OVERLL LODING SHOVEL Weight: 111 000 (2 800 : 70 (17'11") 20 (17'3") OVERLL 3 20 (11'7") ackhoe EX1200-D 1 20 mm 00 mm 70 mm 1 00 E-boom (8'0") (21'0") (17'11") (0'") 1 17 EX1200-D 1 170 mm (3'1") 720 mm (18'9") 70 mm (17'11")
LIFTING CPCITIES Conditions EX1200-D E-boom 2 9" E-arm 11 2" ucket PCS : 8.0 yd 3 Shoes 28" EX1200-D oom 29 " rm 11 2" ucket PCS :. yd 3 Shoes 28" Conditions EX1200-D oom 29 " rm 1 9" ucket PCS :.23 yd 3 Shoes 28" ENGLISH MESURE : Load radius : Load point C: Lifting capacity Rating over-side or 30 degrees Rating over-front Unit: 1 000 lb Load point 2 ft 20 ft 1 ft ft ft - ft - ft -1 ft 2 ft 20 ft 1 ft ft ft - ft - ft -1 ft -20 ft Load point 30 ft 2 ft 20 ft 1 ft ft ft - ft - ft -1 ft -20 ft -2 ft *9.2 *3.0 *8.7 *72.9 *2.0 *.8 *87. *9.1 *71.7 *79.1 Load radius 1 ft 20 ft 2 ft 30 ft 3 ft 0 ft *9.2 *3.0 *8.7 *72.9 Load radius 1 ft 20 ft 2 ft 30 ft 3 ft 0 ft ft *2.0 *.8 *87. *9.1 *71.7 *79.1 *3.1 *7.1 *. *71.9 *70. *77.3 *0.9 *7.2 *.0 *71.0 *77. 78.1 *9.9 *7.8 *8.2 *.3 *.0 *71.0 *77. *8.0 *9.9 *7.8 *8.2 *.3 *3.1 *7.1 *. *71.9 *70. *77.3 *0.9 *7.2.2.2 3.0 3.0 2. 2. 2.8 2.8 3.7 3.7 *.9 *1.9 *9.1 *3.7 *7.8 9.3.8.8 3.7 3.7 2.8 2.8 2.9 2.9 *2.9 3.8 2. 2. 2. 2. 3.3 3.3 *0.1. *3.9 *70.1 *.2 *71. *. *70.7 *1. *7. *.1 *1.8 *.9 *1.9 *9.1 *3.7 *7.8 3.3 *.1 *70.2 *.7 *73.0 *.8 *72.1 *1. *7. *2.9 8. *. *70.9 *2.1 *8.3 *7. *3. *0.1 *.3 *3. *0. *1.7.3 2. 2. 0. 0. 39. 39. 39. 39. *3. *0.7 t max. reach With heavy lifting system Notes:1.Ratings are based on SE J97. 2.Lifting capacity of the EX Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. *3.7 *39. *0.3 *.3 3.3 3.3 1.0 1.0 39. 39. 38. 38. 38. 38. 39.2 39.2 *3.0 *39.7 *0. *. 3.3 3.3 1.1 1.1 39. 39. 38.7 38.7 39.1 39.1 *39.8 0.3 *3. *0. *1.7 *.9 *.1 *0.8 *9.3 *.3 *1.0. *1.1.0 *9.3.0 *.1 *9.8 *3. *0.7 *3.7 *39. *0.3 *.3 *.2 *9.8 *9. *.3 *1.7.9 *1.7.9 *8. *3.7 *0.7 *.2 *3.0 *39.7 *0. *. *.8 *9. *8. *3.3 *0..9 *1.2.0 *0.0 3.9 *. *1. *39.8 *.2 *28. *31. *31. *3.9 *3. 3. 32.9 32.9 31. 31. 30. 30. 30. 30. *27. *30.0 *32.9 3.3 33.9 33.9 32.3 32.3 30.9 30.9 29.8 29.8 29.2 29.2 29.3 29.3 *30.2 *33. *31.9 *3.3 *3.3 3.0 33.3 33.3 31.8 31.8 30.7 30.7 30.0 30.0 30. 30. *28. *31. *31. *3.9 *3. *38. *37. *1. *0.0 3. *1. 2. *1. 1.9 *39.9 1.9 *3. 39.7 *27. *30.0 *32.9 3. *3.2 *38.9 *37.9 *1.9 *0.3 3.9 *1.7 2.7 *1.2 2.1 *37. *1. *30.2 *33. *31.9 *3.3 *3.3 *38.0 *37.0 *1.0 *39. *3. *1.0 2. *1. 1.9 *0. 1.8 *37.1 *1.2 *2.9 *27. *2. *2. 29.2 28.1 28.1 2.9 2.9 2.7 2.7 2.7 2.7 2.1 2.1 23.8 23.8 2.0 2.0 *2.9 *27. *2. *2. *29. *28.1 *31.3 *30.1 *33. *32.1 3. *33. 3. 33.8 33.8 33. 33. *31.9 33.8 2.2 2.2 23. 23. 28. 28. 27.7 27.7 2.9 2.9 2.9 2.9 2.9 2.9 2.2 2.2 23.9 23.9 *20. 21. 21. 20.9 20.9 20.2 20.2 19.7 19.7 19.3 19.3 *2.8 *29.3 *28.8 *31. *29.0 *32.2 *29.7 *33.1 *30.8 *3.2 *32.2 3.7 *33. 3.8 3.0 3.0 33. 33. *20. *22. *2.2 *29.3 *27.2 29.3 28. 27.9 27.9 27. 27. *12.0 *13. *13.7 *12. *1.2 *13. *1.1 *1.8 *1. *1.8 *18.7 *19.9 *19. 20.7 18.9 18.9 17.9 17.9 17. 17. 17.7 17.7 18. 18. 20. 20. 23.7 23.7 *2.8 *2.7 t max. reach *11.3 *12.7 *11.2 *12. *11.2 *12. *11. *12.9 *12.0 *13. *12.8 *1.2 *13.9 *1. *1. *17.1 *17.7 *19. *21.0 *22.9 *12.0 *13. *13.7 *12. *1.2 *13. *1.1 *1.8 *1. *1.8 *18.7 *19.9 *19. *21. *19. *21. *20.1 *20.8 *22.8 *2.0 *23. *2.8 *2.0 *27.0 *30.3 *2.8 *2.7 *11.3 *12.7 *11.2 *12. *11.2 *12. *11. *12.9 *12.0 *13. *12.8 *1.2 *13.9 *1. *1. *17.1 *17.7 *19. *21.0 *22.9 ft in 1 7" 2 9" 3 " 3 2" 2 3" 0 " 38 0" " 8 0" 8 " 8 " 7 " 0 " " 1 " 37 2" ft in 9 2" 0 11" 2 0" 2 " 2 " 1 9" 0 " 8 " 9" 2 1" Conditions EX1200-D E-boom 7. m E-arm 3. m ucket PCS :. m 3 CECE :.7 m 3 Shoes 7 mm EX1200-D oom 9.1 m rm 3. m ucket PCS :.0 m 3 CECE :. m 3 Shoes 7 mm : Load radius : Load point C: Lifting capacity Rating over-side or 30 degrees Rating over-front Unit: 1 000 Load point 8 m m m 2 m -2 m - m - m 8 m m m 2 m -2 m - m - m Load radius 3 m m m 8 m m 12 m With heavy lifting system Notes:1.Ratings are based on SE J97. 2.Lifting capacity of the EX Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket. 18.*Indicates load limited by hydraulic capacity. 19 Conditions EX1200-D oom 29 " rm 19 0" ucket PCS :. yd 3 Shoes 28" *31. *33. *32.3 *3. *2. *33. *3.8 *31.1 *31. *33. *32.3 *3. *2. *33. *3.8 *31.1 *22. *2. 23.7 23.7 22. 22. 22.0 22.0 22.2 22.2 *1. *17.3 21.9 21.9 *21.8 22.8 *22. *2. *2. *28.9 *31.0 *27.7 *30. *2.3 *2.8 *1. *17.3 *27. *30.1 *2. *28.2 *21.8 *2.1 *1. *1.1 *1. *17.1 17.2 17.2 1.1 1.1 1.2 1.2 1.8 1.8 1.1 1.1 *1.2 *1.8 *17.2 17. 1.3 1.3 1. 1. 1.1 1.1 1.2 1.2 *1. 1.9 *1. *1.1 *1. *17.1 *17. *19.2 *19. *21. 21.7 *20. 21.3 *17.1 *19.0 *1.2 *1.8 *17.2 *19.0 *19.1 *21.1 *20.3 21. *20. 21.1 *19. 21.2 *1. *17.3 11. 11. 11.1 11.1.7.7 ENGLISH MESURE : Load radius : Load point C: Lifting capacity Rating over-side or 30 degrees Rating over-front Unit: 1 000 lb Load point 30 ft 2 ft 20 ft 1 ft ft ft - ft - ft -1 ft -20 ft -2 ft *2.3 *. *7.2 *80.7 *93.7 *2. Load radius 1 ft 20 ft 2 ft 30 ft 3 ft 0 ft ft *2.3 *. *7.2 *80.7 *93.7 *2. *3.9 *8. 79.2 79.2 79.9 79.9 *72.2 *79.0 *3.9 *8. *8.7 *91.8 *80.7 *88.2 *72.2 *79.0 *9. *.0 *7.3 1.8 8. 8..1.1.0.0...9.9.9.9 *9. *.0 *7.3 *2. *3.1 *9.0 *. *72.7 *7. *7.0 *.7 *72.9 *3. *9. *7.3 *2.9 *39.9 *3.8 *.1..1.1 2.3 2.3 1.2 1.2 0.8 0.8 0.9 0.9 1.7 1.7 METRIC MESURE *12.9 *1.1 *1.7 *1.1 *13.7 *1.9 *. *.19 *.8 *.21 *.81 *. *.7 *7.27 *7.2 *8.8 *9.0 *. *8.88 *9. 8. 8. 8.01 8.01 7.97 7.97 8. 8. 9. 9. *11.9 t max. reach With heavy lifting system Notes:1.Ratings are based on SE J97. 2.Lifting capacity of the EX Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. *39.9 *3.8 *.1 *9. *9.3 *.1 *2.2 *7.2 *3.. *3.3.0 *1.0 *.1 *.0 *0. *30. *33. *3.0 *37. 3.2 3.2 3. 3. 33.1 33.1 32.3 32.3 31.9 31.9 32.0 32.0 32.8 32.8 *30. *33. *3.0 *37. *37. *1.3 *0. *. *2.7.1 *3.8.2 *3. 3.8 *1. 3.9 *3. *0.3 *2.7 *28. *27.7 *30.7 30.0 30.0 28. 28. 27. 27. 2. 2. 2.9 2.9 2.7 2.7 2.9 2.9 *2.7 *28. *27.7 *30.7 *30.1 *33.3 *32. *3.9 *3. 37.3 *3.1 3.3 3.7 3.7 3. 3. *33. 3.7 *18.9 *23.3 *2. *2.7 2. 2.7 2.7 23.8 23.8 22.9 22.9 21. 21. 21.2 21.2 21.2 21.2 *18.9 *23.3 *2. *2.7 *27. *2.0 *28.8 *27. *30. *29.0 31.2 *30.3 30. 29.8 29.8 29. 29. *2. *28.9 *9.81 *11.0 *9.3 *.8 *9. *.9 *9.8 *11.1 *.2 *11. *.8 *11.7 * *12.9 *1.3 *1. *1.0 *1.8 *18. *20. *22.3 *21.1 *22.7 *9.81 *11.0 *9.3 *.8 *9. *.9 *9.8 *11.1 *.2 *11. *.8 *11.7 * *12.9 *1.3 *1. *1.0 *1.8 *18. *20. *22.3 *21.1 *22.7 t max. reach. *.19 *.8 *.21 *.81 *. *.7 *7.27 *7.2 *8.8 *9.0 *. *8.88 *9.73 *8.92 *9.77 *9.21 *.1 *9.78 *.7 *.7 *11.7 * *13.3 *11.9 *13.3 ft in 1 11" 3 7" 8" 2" 2" 7" 3 " 1 " 9 7" " 2 " 37 0" meter 12. 13.1 13.2 12. 11.2 1.1 1. 1.8 1. 1.1 13.3 11.9
LIFTING CPCITIES METRIC MESURE : Load radius : Load point C: Lifting capacity Rating over-side or 30 degrees Rating over-front Unit: 1 000 Conditions EX1200-D oom 9.1 m rm. m ucket PCS :.0 m 3 CECE : 3. m 3 Shoes 7 mm EX1200-D oom 9.1 m rm.8 m ucket PCS : 3. m 3 CECE : 3.0 m 3 Shoes 7 mm Load point m 8 m m m 2 m -2 m - m - m -8 m 8 m m m 2 m -2 m - m - m -8 m *23.8 2 m *23.8 *19.8 *21. *38.1 *0.9 *17. *18.9 *29. *31. *. *9.7 Load radius m m 8 m m 12 m 1 m *19.8 *21. *38.1 *0.9 *17. *18.9 *29. *31. *. *9.7 3.3 3.3 *32. *3. *2.0 *27. *22.8 *2. *33. *3.9 37.2 37.2 *31.9 *3.0 *3.7 *0.2 *32. *3. *2.0 *27. *22.8 *2. *33. *3.9 *37. *0.9 *31.9 *3.0 *20. *22. 2.3 2.3 22.8 22.8 22.0 22.0 22. 22. *18. *23. *2. 2. 2. 23. 23. 22.9 22.9 23.0 23.0 23. 23. *20. *22. *2. *27.0 *27.0 *29.7 *27.8 *30. *2.9 *29. *2.3 *2.8 *18. *1.8 *17. 1.9 1.9 1.9 1.9 1.3 1.3 1.1 1.1 1. 1. *1.8 *17. *18.1 *20.0 *19.8 *21.8 *20. 21.3 *20.2 21.1 *18.2 *20.1 *.2 *11.1 *11. *12.8 *13. 11. 11. 11.2 11.2 11.1 11.1 *.2 *11.1 *11. *12.8 *13. *13.3 *1.8 *1. *1.2 *1. 1.1 1.7 1.7 *1. 1. 9.22 9.22 8.8 8.8 8. 8. *11. *12. *12. 12. t max. reach With heavy lifting system Notes:1.Ratings are based on SE J97. 2.Lifting capacity of the EX Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. *23. *2. *2.8 *29.3 *28. *31.2 *28.7 *31. *27.3 *30.0 *23.7 *2.0 *1.2 *1.8 *17.8 18. 17. 17. 1. 1. 1.1 1.1 1.1 1.1 1. 1. *1.2 *1.8 *17.8 *19. *19.9 *21.9 *21.3 22. *21.7 22.0 *17. *19.3 *11.8 * *13.1 1. 13. 13. 12.8 12.8 12.0 12.0 12.0 12.0 *11.8 * *13.1 *1. *1. *1.2 *1.0 17. 1.8 1.8 1. 1. *1.8 1. *9.2 *.1 11.0 11.0...1.1 9. 9. 9.33 9.33 9.28 9.28 *9.2 *.1 *11.2 *12. *11.9 *13.2 *12.7 13.8 13.3 13.3 *11. *12. *.2 *.87 *.07 *.8 *.09 *.71 *.28 *.92 *.7 *.33 *.30 *7.00 *7.28 *8.0 *8.87 *9.72 *.38 *.93 *.38 *.93 *.2 *.08 *.82 *.39 *.30 *.90 *.0 *.9 *7.19 *7.91 *9.13 *9.97 *8.81 *9.8 *.2 *.87 *.07 *.8 *.09 *.71 *.28 *.92 *.7 *.33 *.30 *7.00 *7.28 *8.0 *8.87 *9.72 *.38 *.93 *.38 *.93 *.2 *.08 *.82 *.39 *.30 *.90 *.0 *.9 *7.19 *7.91 *9.13 *9.97 *8.81 *9.8 meter 1. 1. 1.9 1.0 1.8 1. 1. 13.3 1.2 1.7 1.8 1.7 1.3 1. 1..8 These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Hitachi Mining Products P.O. ox 880 11 th venue Moline, IL 12 www.hitachimining.com DKEX1200HT (0-0)