INFORMATION PAGE 570NEP TRACTOR: INDUSTRIAL LOADER UNIT INFO Vendor Name: Titan Machinery Inc Contact Person: Brenden Honebrink Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo, ND Phone #: 952-445-5400 Toll Free #: 800-795-9274 Fax #: 952-445-0365 Email Address: brenden.honebrink@titanmachinery.com Version of Excel used: Spec # Information Requested Answer 2016 1.0 Make & Model Case Price for base unit $54,025 Tier 3, 3i, or 4? Engine HP gross/net (SAE) Aspiration Transmission, type and number of fwd and reverse gears Brakes Steering Drive Axles Front tires, size and type Rear tires, size and type Loader Capacity (SAE) standard bucket Tier 4 Final 74HP Gross / 72 Net Turbo Charged 4F/4R Powershuttle Hyd Wet Disc Brakes Hydrostatic Planetary 11L X 16 10PR 17.5L x 24, 10PR 1 cu yd. Loader standard bucket width 82" Loader maximum operating height 13' 8" Loader lift capacity at maximum height Loader breakout force 6,503 lbs. 9,607 lbf Loader maximum hinge pin height 11' 3" Loader dump reach at maximum height 26" Loader maximum bucket roll back at ground level 40 Degrees Loader digging depth, with bucket flat 7.5" Lights, front/rear Gauges Warranty Term (months, years) 2 Headlights, 2 Rear Flood 2 Rear Tail/Stop, 2 Front Flashers 2 Rear Flashers Engine Water Temperature, Converter Oil Temperature, Fuel Level, Tachometer, Hour Meter, Def Level One Year Unlimited Hours, Two Years/2000 Hours Power-train 570NEP INFO
Price quote for: INDUSTRIAL LOADER PRICING INFO VENDOR NAME MAKE AND MODEL Titan Machinery Inc. Case Spec # Description Case Part # Price 1.0 Price for base unit: $ 54,025 2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need. 2.1 Deduct for Canopy ROPS only - (no cab) 442082 $ (7,091) 2.2 Canopy ROPS - low profile (only usable with 2.1) 423022 $ (6,631) 2.3 Optional Right Hand Door on cab with A/C 747853 $ 1,198 2.4 Sun Visor for Canopy 442084 $ 51 2.5 Sun Shade for low profile Canopy 423023 $ 87 2.6 Air Conditioning 747853 $ 1,198 2.7 Non Suspension, Vinyl w/o armrests 747850 STD 2.8 Mech Susp, Vinyl, with armrests (for canopy option) 747851 $ 320 2.9 Mech Susp, Cloth, with armrests, Cab unit only 747770 $ 335 2.10 3" Seat Belt ILO 2" Belt 747735 $ 48 2.11 Cab Convenience Package 747775 $ 933 (includes del. headliner, radio ready, sun visor, and front & rear window washers. ) 2.12 Hand Throttle 747880 STD 2.13 Tool Box 747875 $ 113 2.14 Comfort Steer 423011 $ 466 2.15 Special Paint 747891 $ 2,254 2.16 Telematics on board (does not include subscription) 745121 $ 526 2.17 Ride Control - factory 747873 $ 806 2.18 Fire Extinguisher - 5# ABC - BIC SI3070 $ 112 2.19 Deluxe Mirror Package - BIC SI3045 $ 288 2.20 Heated Mirror Package (cab only) - BIC SI3045-H $ 403 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers as you need. 3.1 Block Heater 423088 STD 3.2 Cold Start Dual Battery 423093 $ 392 3.3 Battery Disconnect / Remote Jump start terminals 747874 $ 99 3.4 Rotating Beacon, Factory installed 728758 $ 153 3.5 Light pkg (includes 2 additional frt & rear) (w/2.1) 747666 $ 212 3.6 LED Light Package - BIC (price per each light) SI3327 $ 177 3.7 Corner Strobe Set LED - mount in Turn Signal Housing for Cab Units - BIC WI259 $ 575 3.8 Whelen Strobe - BIC SI3302 $ 690 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers as you need. 4.1 4 Wheel Drive $ 8,313 4.2 4 Wheel Drive Shaft Guard 745136 $ 109 4.3 Chaff Screen 747665 $ 167 5.0 AXLES & TIRE OPTIONS Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers as you need. 5.1 11L X 16 10PR F3 (2WD) 8101110 STD 5.2 12 x 16.5, 8PR Lug Tread (4WD) 8201110 STD 5.3 17.5L x 24, 10PR (R4) Rear Tires 8401150 STD 5.4 19.5L x 24, 10PR (R4) Rear Tires 8401140 $ 192 5.5 17.5L x 24, 10PR (R4) Rear Tires - Goodyear 8401130 $ 153 5.6 19.5L x 24, 10PR (R4) Rear Tires - Goodyear 8401120 $ 320 5.7 Wheel Weights (564 lbs.) 747895 $ 616 5.8 Front Fenders 742803 $ 490 Pricing
Extra Tire & Wheel @ 5.9 11L X 16 10PR F3 (2WD) 442095 $ 195 5.10 12 x 16.5, 8PR Lug Tread (4WD) 423015 $ 278 5.11 17.5L x 24, 10PR (R4) 745169 $ 573 5.12 19.5L x 24, 10PR (R4) 745168 $ 669 5.13 17.5L x 24, 10PR (R4) - Goodyear 442101 $ 650 5.14 19.5L x 24, 10PR (R4) - Goodyear 442100 $ 734 6.0 HYDRAULICS Use this section to offer rear mounted options. Number items starting with 6.1, 6.2, etc. Use as many numbers as you need. Loader 6.1 Auxiliary Hydraulics and Controls 747892 $ 843 (included with 4 in 1 or hydraulic quick attach) 6.2 Hydraulic Quick-attach for ldr bucket 423049 $ 3,507 (includes ldr aux hydraulics & hose kit ) 3 - Point Equipment 6.3 "Return to position" (holding valve) for single 4 function valve 747876 $ 837 6.4 Five Function Valve w/dual tilt Cylinders without "return to position" 747877 $ 1,019 6.5 Five Function Valve w/dual tilt Cylinders with "return to position" 747878 $ 1,363 6.6 PTO Ready 745163 $ 868 6.7 PTO 540RPM Hyd Drive 745137 $ 2,414 BIC - KI8000/8500 Series High Flow/PTO Kits (Factory Installed) The K8000 and K8500 Kits are specifically designed for the 570NEP The K8000 kit is a high flow hydraulic kit capable of up to 30 gallons at 3000 psi making it perfect for operation of hydraulically driven attachments such as augers, flails, rotary mowers and landscape rakes. This kit comes standard with 6 position flow control (8, 13, 18, 22, 26, 28.5 gpm) so that it can also be used with handheld work tools. Requires ordering of 6.6 above The K8500 kit includes a 540 rpm PTO motor (operating at 26 gpm setting 5) that is coupled to the (K8000) high flow kit for use on shaft driven attachments. Both kits include an extra pump, controller and all plumbing that makes a system capable of 44 gross pto horsepower that give good low engine speed performance. Kit includes dash switch for operation high flow/pto and quick disconnects. Requires ordering of 6.6 above 6.8 High Flow Kit, 30 gpm includes 2nd eng mtd pump KI8006 $ 3,853 C65 Control Valve, Qds. 6.9 High Flow Kit and 540 PTO incl. 2nd eng mtd pump, KI8506 $ 4,255 C65 Control Valve, Qds. 44 hyd hp 7.0 REAR MOUNTED OPTIONS Use this section to offer rear mounted options. Number items starting with 7.1, 7.2, etc. Use as many numbers as you need. 7.1 Drawbar, Rear 747871 $ 105 7.2 84" Box Scraper 747884 $ 2,670 7.3 88" Box Scraper 84149585 $ 3,700 7.4 Additional Rear Weights (500#) 747879 $ 337 7.5 Three Point Hitch 747899 $ 885 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers as you need. 8.1 82" Wide, HD long lip, 1 cu yd. (includes lift eyes) 747862 $ 1,577 8.2 82" Wide, Long Lip, 1 cu yd. (includes lift eyes and bolt on edge) 747657 $ 1,629 8.3 82" Wide, 4 in 1, 1 cu yd. 747863 $ 3,732 (Must order 6.1 or 6.2, Includes bolt on edge, requires 3-pt or counterweight.) 8.4 93" Wide, Long Lip, 1.3 cu yd. - (includes bolt on edge) 747539 $ 1,674 8.5 Manual Quick-Attach for Loader Bucket 420373 $ 1,377 8.6 Hydraulic Quick attach for Loader Bucket (Must order 6.1 or 6.2) 423049 $ 3,509 8.7 Counterweight. Front - 440# 747580 $ 412 Front Loader Quick Attach Attachments 8.7 Bale Spear 87473631 $ 820 8.8 96" Angle Broom 84215702 $ 10,100 8.9 Manual Angle For 8.8 84215707 $ 220 8.10 Hydraulic Angle for 8.8 84215708 $ 1,305 8.11 84" Collector Broom 84274993 $ 9,300 8.12 Gutter Brush Kit for 8.11 84274995 $ 1,430 Pricing
8.13 82" GP Bucket 295686A1 $ 1,595 8.14 98" LM Bucket 47365338 $ 1,865 8.15 83" Scrap Grapple Bucket 301094A1 $ 5,925 8.16 Pallet Forks 87334961 $ 2,600 8.17 108" Snow Blade 251018A1 $ 3,695 8.18 96" Snow Push 47692550 $ 3,025 8.19 120" Snow Push 47692552 $ 3,395 8.20 13' Sectional Snow Push 48032852 $ 7,295 9.0 PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need. 9.1 One set OEM Air and Fluid Filters STD 9.2 One set Parts, Service, and Operations Manuals on CD STD 10.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 13 11.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ 945 Monthly Rental Rate: $ 2,550 Percent (%) of Rental Fee applied to purchase price: 80% first 90 Days If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: N/A 12.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS 12.1 Delivery Starting Point - City, State, Zip code Nearest Titan Machinery Case CE Location 12.2 Price per loaded mile $ 4 13.0 WARRANTY DETAILS: MONTHS, YEARS, HOURS, ETC. Case standard warranty is for one year - unlimited hours Engine is two years or 2000 hours. 13.1 Extended Warranty Options Case Warranty covers the CASE machine only. Protection Plan must be purchased with-in first 90 days or add 15% additional during base warranty. Mfg's standard warranty is applicable to non-case equipment. Case Purchased Protection Plan - Zero deductible Months/hours Coverage 13.2 36/3000 - Power-train Only $ 417 13.3 48/4000 - Power-train Only $ 625 13.4 60/5000 - Power-train Only $ 1,302 13.5 24/2000 - Power-train Plus Hyds $ 239 13.6 36/3000 - Power-train Plus Hyds $ 626 13.7 48/4000 - Power-train Plus Hyds $ 1,150 13.8 60/5000 - Power-train Plus Hyds $ 1,954 13.9 24/2000 - Full Machine $ 543 13.10 36/3000 - Full Machine $ 1,010 13.11 48/4000 - Full Machine $ 1,992 13.12 60/5000 - Full Machine $ 3,320 14.0 HOURLY SHOP RATE $ 125 (Installation services may be requested on an "as needed" basis) Pricing
SWIFT EVENT TITLE & NUMBER: Tractors: Loader Backhoe (65HP or Greater) and/or Industrial Tractors = Event 5395 ** Following is a list of all distributors that are authorized to sell the equipment listed above. ** The Swift Vendor Number (SWIFT UD) must be complete, including the vendor Swift ID and Location Code (LOC CODE). ** All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract may be executed. COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME Titan Machinery Inc. 25189200% 1800% 6340 County Road 101 E, Shakopee MN, 55379 952-445-5400 Brenden Honebrink Titan Machinery Inc. 25189200% 600% 4001 38th Street SW, Fargo ND, 54108 701-237-3333 Mary Aure Titan Machinery Inc. 25189200% 1000% 500 Ingersoll Ave, Crookston MN, 56716 218-281-4668 Kraig Rygg Titan Machinery Inc. 25189200% 1900% 4311 Haines Road, Hermantown MN, 55811 218-727-3038 John Kreklow Titan Machinery Inc. 25189200% 1700% 14375 James Road, Rogers MN, 55374 763-428-5099 Brenden Honebrink Titan Machinery Inc. 25189200% 200% 1201 North Hwy 59, Marshall MN, 56258 507-532-5783 Lucas Hilgemann Titan Machinery Inc. 25189200% 500% 4400W 62nd St N. Sioux Falls SD, 57104 605-336-3434 Matt Leighton Titan Machinery Inc. 25189200% 2000% N 1626 Wuensch Road, La Crosse WI, 54601 608-788-1025 Jesse Schmidt