FA-T17-B Product Data Sheet Pressure ratings up to 6,000 psi/40 bar or 10,000 psi/690 bar 1) High Pressure Access Systems Roxar offers a complete range of access fitting assemblies for installation of corrosion probes and weight loss coupons. The product range comprises both the traditional mechanical system as well as the hydraulic system - invented by Roxar (see separate data sheet). The Roxar Mechanical Access and Retrieval System is a complete system for installing and retrieving probes and coupons from high pressure piping, pipelines and vessels under full operational pressure. Maximum operating temperature is 04 C (400 F). Roxar s Mechanical Access Products are compatible and interchangeable with industry standard products also supplied by other vendors. Roxar s Mechanical Access and Retrieval system comprises the following components: High pressure mechanical access fitting Mechanical hollow and solid plugs Heavy duty protective covers for mechanical system Mechanical retrieval tool (see separate brochure and data sheet) Roxar Mechanical Access System is also available for injection and sampling applications (Tee type fittings - see applicable data sheet). 1) The system allows for live retrieval tool operations for pressures up to 6,000 psi (40 bar). However, the fittings are rated to pressures up to 10,000 psi (690 bar) for some materials. 1
Mechanical Access Fittings Mechanical Hollow and Solid Plugs Mechanical Access Fitting Covers The main purpose of the Mechanical Access Fitting Cover is to protect the external ACME threads on the access fitting. For weight loss coupons and corrosion probes, mechanic access fitting covers are available also as pressure retaining covers, with pressure rating up to 690 bar/10,000 psi (10,000 psi rating subject to material). For coupons, the pressure retaining cover contains a pressure gauge and bleed valve. For corrosion probes, the pressure retaining cover also contains a pressure retaining probe connector adaptor. Flareweld Mechanical Access Fitting Assembly - general assembly Hollow and Solid Plugs Access Fitting Covers The Mechanical Access Fitting has an ACME threaded outlet to mate with the service valve of the mechanical retrieval tool system. The Mechanical Access Fitting has a threaded connection with the hollow/solid plug. A protective cover is used for protection of the external ACME threaded section. Flareweld and flanged mechanical access fittings. The Mechanical Access Fitting is available in flareweld and flanged versions as standard. However, other versions (e.g. HUB fittings) are available upon request. Mechanical Access Fittings are manufactured in ASTM A105, ASTM A50 Gr. LF and Duplex steel as standard materials (other materials available on request). Mechanical Access Fittings meet NACE MR0175 (sour service) requirements. NORSOK specification upon request. PED compliance available. The Hollow or Solid Plug provides the pressure seal in the access fitting, and is the carrier for the corrosion monitoring device (probe or coupon). The primary packing is made from PTFE (15% glass filled). Metal seals are available for high temperature service. The mechanical solid plug has an o-ring that must be selected according to application. The Mechanical Hollow Plug is used for electric probes like Electric Resistance (ER) and Linear Polarization Resistance (LPR) Probes. The Mechanical Solid Plug is used for passive monitoring devices like weight loss coupons, bio coupons and injection/ sampling equipment. Roxar Hollow and Solid Plugs are available in 16 SS and Duplex as a standard. For those applications where galling is of concern, PTFE coating of the threaded section of the plug can be provided. Alternatively, plugs in different materials can be supplied, to mismatch the fitting material in order to minimize the risk of galling. Please consult Emerson/Roxar for more information. Also note that special design plugs are available for high velocity applications, based on results from wake frequency calculations. Model Selector - Mechanical Access Fittings TAF High Pressure Access Fitting Design Type Pressure Rating 1 Max 6 000 psi Design Pressure Process Connections 00 Flareweld 0 Flanged 150 lbs RF 1 Flanged 00 lbs RF Flanged 400/600 lbs RF Flanged 900/1500 lbs RF 4 Flanged 500 lbs RF 0 Flanged 150 lbs RTJ 1 Flanged 00 lbs RTJ Flanged 400/600 lbs RTJ Flanged 900/1500 lbs RTJ 4 Flanged 500 lbs RTJ 99 10 Other Connection
Material PM 8 0A6A 1 Carbon Steel ASTM A105, bar EN 1004.1 NACE MR0175 0B6A 1 Carbon Steel ASTM A50 Gr. LF Cl. 1, bar EN 1004.1 NACE MR0175 D6A 1 Duplex A 76 / A 479 UNS S180, bar EN 1004.1 NACE MR0175 0AA Carbon Steel ASTM A105, forging EN 1004.1 NACE MR0175 5,, 9 HT Pressure T 10 Pressure Testing (select any from this group) test for Flanged Fittings 0BA Carbon Steel ASTM A50 Gr. LF Cl. 1, forging EN 1004.1 NACE MR0175 DA Duplex A 18 F51, forging EN 1004.1 NACE MR0175 0A6C 1 Carbon Steel ASTM A105, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS C01 0B6C 1 Carbon Steel ASTM A50 Gr. LF Cl. 1, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS C11 1 Available only with Process Connections option 00, Flareweld Not available with Process Connections option 00, Flareweld 6 Not available with Material options 0A6A, 0B6A, D6A, DA, 0A6C, 0B6C, D6C, DC 7 Not available with Material options 0A6A, 0B6A, D6A, 0AA, 0BA, 0A6C, 0B6C, D6C, 0AC, 0BC 8 Not available with Material options 0A6A, 0B6A, 0AA, 0BA, 0A6C, 0B6C, 0AC,0BC 9 Not available with Material options 0A6A, 0B6A, D6A, 0A6C, 0B6C, D6C 10 Not available with Factory Option D6C 1 Duplex A 76 / A 479 UNS S180, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS D47 0AC Carbon Steel ASTM A105, forging EN 1004.1 NACE MR0175 NORSOK M60 MDS C01 0BC Carbon Steel ASTM A50 Gr. LF Cl. 1, forging EN 1004.1 NACE MR0175 NORSOK M60 MDS C11 DC Duplex A 18 F51, forging EN 1004.1 NACE MR0175 NORSOK M60 MDS D44 99 10 Project Specific Material Operating mode and conditions 00 Not Applicable Product specific options C0 No Coating C1, 6 Roxar Standard Coating for CS with operating temperature below 10 C C, 6 Roxar Standard Coating for CS with operating temperature above 10 C C6, 7 C 10 TG 10 Roxar Standard Coating for SS Project Specific Coating Tag Plates No Tag Plates Standard Tag plates for fittings Project Specific Tag Plates Model Selector - Mechanical Hollow and Solid Plugs TPLUG Plug Design Type Plug type 00 Solid Plug 0 Hollow Plug 0 Reinforced Plug Material C6A Stainless Steel A 479 Gr. 16L, bar EN 1004.1 NACE MR0175 D6A Duplex A 76 / A 479 UNS S180, bar EN 1004.1 NACE MR0175 C6C Stainless Steel A 479 Gr. 16L, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS S01 D6C Duplex A 76 / A 479 UNS S180, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS D47 99 Project Specific Material Operating mode and conditions 00 O-ring Not Applicable PTFE Primary Packing 01 Standard Viton O-ring PTFE Primary Packing 0 Rapid Gas Decompression FR 5/90 O-ring PTFE Primary Packing 0 Rapid Gas Decompression and/or 100 % Methanol Elast-O-Lion 101 O-ring PTFE Primary Packing Product specific options C0 No coating 4 5
C4 PTFE coating on Mechanical Plug Threads 0B6C Carbon Steel ASTM A50 Gr. LF Cl. 1, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS C11 D6C Duplex A 76 / A 479 UNS S180, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS D47 99 10 Project Specific Material Operating mode and conditions 00 Not Applicable 01 Standard Viton O-ring 0 Rapid Gas Decompression FR 5/90 O-ring 0 Rapid Gas Decompression and/or 100 % Methanol Elast-O-Lion 101 O-ring PM Product specific options C0 No Coating T C1 5 Roxar Standard Coating for CS with operating temperature below 10 C Not available with Plug Type options 0, 0 Not available with Factory Option C 5 Roxar Standard Coating for CS with operating temperature above 10 C C6 6 Roxar Standard Coating for SS Model Selector - Mechanical Access Fitting Covers C 10 Project Specific Coating Probe Adapter No Probe Adapter TCOV Cover Design Type Pressure Rating 1 Max 6 000 psi Design Pressure Cover Design 00 Heavy Duty without Hole 01 Heavy Duty with Hole 0 Pressure Proof for Solid Plug 0 Pressure Proof for Hollow Plug Material 0A6A Carbon Steel ASTM A105, bar EN 1004.1 NACE MR0175 0B6A Carbon Steel ASTM A50 Gr. LF Cl. 1, bar EN 1004.1 NACE MR0175 D6A Duplex A 76 / A 479 UNS S180, bar EN 1004.1 NACE MR0175 0A6C Carbon Steel ASTM A105, bar EN 1004.1 NACE MR0175 NORSOK M60 MDS C01 A4 10 PM 6 T 10 Standard Probe Adapter for Pressure Proof Cover Other Probe Adapter Not available with Cover Design options 0, 0 Not available with Cover Design options 00, 01 4 Not available with Cover Design options 00, 01, 0 5 Not available with Material options D6A, D6C 6 Not available with Material options 0A6A, 0B6A, 0A6C, 0B6C 10 Not available with Factory Option 6 7
FA-T17-B Product Data Sheet Head Office Roxar products: Emerson Roxar Flow Measurement AS Tel: +47 51 81 88 00 E-mail: info.roxar@emerson.com CIS Tel: +7 495 504 405 Europe Tel: +47 51 81 88 00 North America Tel: +1 81 879 600 Middle East Tel: +971 4 811 8100 Asia Pacific Tel: +60 177 4450 Australia Tel: +61 8 908 1600 Latin America Tel: +55 1 17 8600 017 Emerson. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand name is a mark of one of the Emerson Automation Solutions family of business units. All other marks are the property of their respective owners. The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. The Roxar products are protected by patents. See http://emerson.com/roxarpatents for details. 8