EXP Scaffold Mount LED - Remote Mount Emergency Backup - Day/Night Sensor - C1D1 & C2D1-150' Cord Part #: EPL-JH16C-1MLED-150C-XEMG-XDNS-10C Made in the USA The EPL-JH16C-1MLED-150C-XEMG-XDNS-10C Explosion Proof LED Light from Larson Electronics is rated Class I Divisions 1-2 Groups C & D and Class II Divisions 1-2 and uses LEDs to produce 17,500 lumens of light while drawing only 150 watts. This hazardous area Cree LED light features a remote mount emergency battery back up and a day/night sensor, and comes attached to an aluminum rail/ladder mount bracket that allows operators to easily mount this unit to ladders, handrails, catwalks and other similar structures. The EPL-JH16C-1MLED-150C-XEMG-XDNS-10C explosion proof LED light with remote mount emergency battery backup and day/night sensor provides 8,000 square feet of work area coverage with 17,500 lumens of light output. This portable LED light includes a emergency backup at the end of the 150 foot cord, and a day/night sensor located on the input side of the fixture. This LED light has an angle adjustable light head measuring 16 inches in diameter and an aluminum rail/ladder bracket that can be adjusted from 26 inches to 43 inches to allow mounting to a wide variety of railings, scaffoldings or ladders. This explosion proof LED light has a light head measuring only 16" in diameter, which allows it to fit through most standard sized manholes and entryways and produces a brilliant flood pattern of light that is ideal for illuminating large enclosed areas, further adding to this unit`s desirability as a portable hazardous area lighting solution. Functionality: The EPL-JH16C-1MLED-150C-XEMG-XDNS-10C portable light fixture will operate during night only, when ambient light has fallen below 5 lux. There is a manual override switch on the power supply box to bypass the day/night sensor. While the light is on, should power become disconnected, the emergency battery backup - located at the end of the 150 foot cord - will power the light for 90+ minutes at 150 watts. Page: 1
Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Page: 2
Mounted at 10` Mounted at 12` Mounted at 15` The above images display the EPL-JH16C-1MLED-150C-XEMG-XDNS-10C illuminating a take with a 90` circumference at three different heights. Page: 3
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This portable LED light is comprised of a 16 inch LED light head mounted to an aluminum bracket with an adjustable J shaped bottom hook that enables operators to securely mount the light to any ladder or scaffolding. Lamp adjustment is via an adjustable yolk that allows the operator to position the lamp angle through a full 90 degrees of vertical adjustment. All hardware on this unit is non sparking/corrosion resistant and the power cord is resistant to damage from chemicals and abrasion. Included with this LED light cart is 150 feet of SOOW cord terminating in an explosion proof plug, which combined with the 90 degrees of tilt offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights. This unit is universal voltage and can be operated with 120-277 VAC, 50/60Hz. 25 peel off mylar overspray lamp protectors ship with this ladder rack mount light, further adding to the versatility and convenience this LED light. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. Click Photos to Enlarge 60 Beam Angle 125 Beam Angle Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60 beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125 beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. Click Photos to Enlarge Page: 4
5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated L6-15 Twist Lock Plug 15 Amp / 250V Rated UK BS1363 Straight Blade Plug 13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug 16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This explosion proof tower mounted flood lighting system is equipped with 150 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. An additional 10 feet of cord is connected to the power supply box.. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message sales@larsonelectronics.com for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Superior LED Benefits Page: 5
1. Approved Class I Divs 1-2 Class II Divs 1-2. 2. Fixture arrives assembled and lamped to reduce installation time and cost. 3. J-Bracket constructed of non sparking aluminum. 4. No ballast box. No ballast to replace. 5. Extreme long life LEDs reduce maintenance and replacement costs. 6. Light weight and High Output. 7. 25 peel off mylar overspray lamp protectors ship with the unit. 8. 17,500 Lumens from only 150 watts. 9. Mercury free shock proof LED lamp light head. 1. 50,000+ hour lifespan. 2. Can SAVE 50% or more on energy. 3. 100% recyclable. 4. No toxins-lead, mercury. 5. No UV light, infrared radiation or CO2 emissions. 6. Bright, even light maintains consistent color over time. 7. Instant on/off - No flickering, delays or buzzing. 8. Very good color rendering. 9. Vibration/impact resistant. 10. Significantly cooler operation. 11. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPL-JH16C-1MLED-150C-XEMG-XDNS-10C Explosion Proof Tank Light Listing: United States Lamp Type: Cree LED Dimensions: 16" Light head Weight: 55 lbs Voltage: Universal 120-277V AC 50/60 Hz Total Watts: 150 watts Total Lumens: 17,500 Ratings/Approvals Class I Division 1, Groups C & D Class I Division 2, Groups C,D Class II, Division 1-2, Groups E,F,G cetl Certified to UL844 and C22.2 Standards Explosion Proof Cord Cap Options Remote Mount Emergency Battery Backup Day/Night Sensor Luminous Efficacy: 116.67 Lm/W Emergency Mode: 90+ Minutes at 150W Beam Angle: 60 or 125 Beam Lux: 8500 @ 1 Meter 1250 @ 3 Meters Operating Temp Range: -40 C to +65 C Special Orders- Requirements Contact us for special requirements LED Lamp Life Expectancy: 60,000 Hours Phone: 1-214-616-6180 Color Temp: 5000K, 4000K, 3000K Toll Free: 1-800-369-6671 Mounting: Aluminum Ladder/Rail J-Bracket Fax: 1-903-498-3364 Wiring: 150 feet SOOW Cord w/ Explosion Proof Cord Cap ; 10 feet From Power Supply Box E-mail: sales@larsonelectronics.com Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail Scroll Down to Purchase- This product does not qualify for free shipping. Part #: EPL-JH16C-1MLED-150C-XEMG-XDNS-10C (152956) Page: 6
Options: EPL-JH16C-1MLED-150C-XEMG-XDNS-10C- BEAM - CORD CAP Example: EPL-JH16C-1MLED-150C-XEMG-XDNS-10C-60D-5.15 BEAM 60-60D 125-125D CORD CAP 5-15 Straight -5.15 6-15 Straight -6.15 L5-15 Twist -L5.15 L6-15 Twist -L6.15 UK BS1363 -BS1363 Intl. Schuko -Schuko Pigtail -Pigtail Page: 7
Page: 8
Page: 9
Links (Click on the below items to view): - Manual - Hi-Res Image 1 Main - Hi-Res Image 2 Junction Box - Hi-Res Image 3 Backpack Mount Page: 10