INDEX PRODUCTS...PAGES

INDEX PRODUCTS...PAGES Queen Gil Drip Irrigation Tape..........................................1-2 Plastic Mulch Films....................................................3 Twines...............................................................4 LayFlat Hose and accessories.........................................5-6 Drip Tape Conncector.................................................7-9 Connectors Installation Tools...........................................10 Tape Installation Tools - Shanks.........................................11 Screen Filters + Disk Filters 3/4-2 - 3...............................12-13 Sand Filters..........................................................14 Pressure Gauges + Accesories.........................................15 Venturi Fertilizer Injectors..............................................16 Pressure Regulators..................................................17 Automatic Pressure Regulating Valves...................................18 Air Vents - Vacuum Breakers...........................................19 Plastic Sprinklers 1/2 + accessories....................................20 Plastic Sprinklers 1/2, 3/4, 1.........................................21 Rotors Sprinklers + Accessories.....................................22-24 Rotors Mini-Sprinklers..............................................26-27 Mini-Sprinklers.................................................... 28-31 Rotary Mini-Sprinklers.................................................32 Fixed Stream Mini-Sprinklers........................................ 32-34 Super Rain Mini-Sprinklers.............................................34 Wing Mini-Sprinklers...............................................35-36 Pop Mini-Sprinklers................................................37-38 Mini-Sprinklers Accessories and Tools................................39-41 Plastic Sprayers...................................................42-43 Super Fog System....................................................44 Drippers..........................................................45-46 Barbed Transfer Fittings.............................................47-51 Mini-Valves - Foot Valves - Union Valves............................... 52-53 Threaded Connection Fittings.......................................54-56 Saddle Tees....................................................... 57-59 Compression Fittings...............................................60-63 Garden Products (Union Fittings, Quick Coupling Valves, Valve Boxes,Pop-up sprinklers )......................................64-67 Packing Indications...................................................68 General Sales Conditions..............................................69

meter/foot meter/foot QUEEN GIL DRIP IRRIGATION TAPE QUEEN GIL IDEALE - 16.5 mm - (5/8 ) - Outlet spacing 10 cm - (4 ) Queen Gil Ideale Wall thickness 100 microns, flow = 2, 3, 4 or 8 l/h/m 4 mil 0.060 3050 Wall thickness 4 mil, flow = 16, 24, 32 or 64 g/100 /hour 4 mil 0.018 10000 Wall thickness 150 microns, flow = 2, 3, 4 or 8 l/h/m 6 mil 0.068 600, 1200, 2300 Wall thickness 6 mil, flow = 16, 24, 32 or 64 g/100 /hour 6 mil 0.021 1968, 3937, 7546 Wall thickness 200 microns,flow = 2, 3, 4 or 8 l/h/m 8 mil 0.075 500, 1000, 2000 Wall thickness 8 mil, flow = 16, 24, 32 or 64 g/100 /hour 8 mil 0.023 1640, 3280, 6561 Wall thickness 250 microns, flow = 2, 3, 4 or 8 l/h/m 10 mil 0.096 700, 1500 Wall thickness 10 mil, flow = 16, 24, 32 or 64 g/100 /hour 10 mil 0.029 2296, 4920 Wall thickness 300 microns,flow = 2, 3, 4 or 8 l/h/m 12 mil 0.110 700, 1500 Wall thickness 12 mil, flow = 16, 24, 32 or 64 g/100 /hour 12 mil 0.034 2296, 4920 Wall thickness 400 microns, flow = 2, 3, 4 or 8 l/h/m 16 mil 0.140 400, 800 Wall thickness 16 mil, flow = 24, 24, 32 or 64 g/100 /hour 16 mil 0.043 1312, 2624 QUEEN GIL IDEALE - 22.5 mm - (7/8 ) - Outlet spacing 10 cm - (4 ) Queen Gil Ideale New Flows available Wall thickness 150 microns, flow = 2, 3, 4 or 8 l/h/m 6 mil 0.092 2000 Wall thickness 6 mil, flow =16, 24, 32 or 64 g/100 /hour 6 mil 0.028 5577, 6560 Wall thickness 200 microns, flow = 2, 3, 4 or 8 l/h/m 8 mil 0.100 1700 Wall thickness 8 mil, flow = 16, 24, 32 or 64 g/100 /hour 8 mil 0.030 5577, 6550 Wall thickness 250 microns, flow = 2, 3, 4 or 8 l/h/m 10 mil 0.120 1200 Wall thickness 10 mil, flow = 16, 24, 32 or 64 g/100 /hour 10 mil 0.037 1640, 3937 Wall thickness 300 microns, flow = 2, 3, 4 or 8 l/h/m 12 mil 0.150 1000 Wall thickness 12 mil, flow = 16, 24, 32 or 64 g/100 /hour 12 mil 0.046 3280 1 - For small rolls - Any Thickness, Please add +2%. 2 - For sales conditions, Please refer to last page. 3 - For Packing Informations, Please refer to page 71. 1

meter/foot meter/foot QUEEN GIL DRIP IRRIGATION TAPE Queen Gil Standard New Flows available QUEEN GIL STANDARD - 16.5 mm - (5/8 ) - Outlet spacing 20 cm - (8 ) Wall thickness 100 microns, flow = 2, 3, 4, 5 or 8 l/h/m 4 mil 0,054 2000, 4300 Wall thickness 4 mil, flow = 16, 24, 32 or 64 g/100 /hour 4 mil 0,016 6000, 14100 Wall thickness 150 microns, flow = 2, 3, 4, 5 or 8 l/h/m 6 mil 0,058 600, 1400, 3000 Wall thickness 6 mil, flow = 16, 24, 32 or 64 g/100 /hour 6 mil 0,018 1970, 4600, 9000 Wall thickness 200 microns, flow = 2, 3, 4, 5 or 8 l/h/m 8 mil 0,066 500, 1000, 2000 Wall thickness8 mil, flow = 16, 24, 32 or 64 g/100 /hour 8 mil 0,020 1650, 3300, 6600 Wall thickness 250 microns, flow = 2, 3, 4, 5 or 8 l/h/m 10 mil 0,080 700, 1500 Wall thickness 10 mil, flow = 16, 24, 32 or 64 g/100 /hour 10 mil 0,024 2300, 5000 Wall thickness 300 microns, flow = 2, 3, 4, 5 or 8 l/h/m 12 mil 0,089 700, 1500 Wall thickness 12 mil, flow = 16, 24, 32 or 64 g/100 /hour 12 mil 0,027 2296, 5000 Wall thickness 400 microns, flow = 2, 3, 4, 5 or 8 l/h/m 16 mil 0,134 500, 1000 Wall thickness 16 mil, flow = 16, 24, 32 or 64 g/100 /hour 16 mil 0,041 1650, 3280 QUEEN GIL STANDARD - 22.5 mm - (7/8 ) - Outlet spacing 20 cm - (8 ) Queen Gil Standard Wall thickness 150 microns, flow = 2, 3, 4, 5 or 8 l/h/m 6 mil 0,090 2000 Wall thickness 6 mil, flow = 16, 24, 32 or 64 g/100 /hour 6 mil 0,027 6600 Wall thickness 200 microns, flow =2, 3, 4, 5 or 8 l/h/m 8 mil 0,100 2000 Wall thickness8 mil, flow = 16, 24, 32 or 64 g/100 /hour 8 mil 0,000 6600 Wall thickness 250 microns, flow = 2, 3, 4, 5 or 8 l/h/m 10 mil 0,120 1500 Wall thickness 10 mil, flow = 16, 24, 32 or 64 g/100 /hour 10 mil 0,037 5000 QUEEN GIL STANDARD - 16.5 mm - (5/8 ) - Outlet spacing 30 cm - (12 ) These Tapes are available in - wall thickness = 100,150, 200, 250, 300 and 400 microns - wall thickness 4, 6, 8,10, 12, 16 mil - flow = 4, 6 or 8 l/h/m - flow = 32, 48 or 64 g/100 /hour For prices see above Queen Gil Standard - 16.5 mm - 5/8-20 cm QUEEN GIL LOW FLOW - 16.5 mm - (5/8 ) - Outlet spacing 20 cm - (8 ) Wall thickness 150 microns, Special, flow = 1 l/h/m 6 mil 0,068 600, 1200, 2300 Wall thickness 6 mil, Special, flow = 8 g/100 /hour 6 mil 0,021 1968, 3937, 7546 Wall thickness 200 microns, Spéciale, flow = 1 l/h/m 8 mil 0,075 500, 1000, 2000 Wall thickness 8 mil, Special, flow = 8 g/100 /hour 8 mil 0,023 1640, 3280, 6560 QUEEN GIL BLOCKED - (16.5 mm) - (5/8 ) - Outlet spacing 30 cm - (12 ) Wall thickness 400 microns, flow = 4, 8 or 12 l/h/m 16 mil 0,124 500, 1000 Wall thickness 16 mil, flow = 32, 64 or 96 g/100 /hour 16 mil 0,041 1640, 3280 1 - For small rolls - Any Thickness, Please add +2%. 2 - For sales conditions, Please refer to last page. 3 - For Packing Informations, Please refer to page 71. 2

QUEEN GIL PLASTIC EMBOSSED MULCH FILMS QUEEN GIL INTERNATIONAL, has made a significant investment in equipment to produce embossed mulch film for agriculture. Applications of the Embossed mulch: Fruits, Vegetables, nurseries, etc. We can produce: All the widths, from 0.5 meter (50 cm) = 1.6 ft (19.69 inch) up to 2.5 meter (250cm) = 8.20 ft (98.43 inch). All the wall thickness from 15 microns = 0.6 mil up to 80 microns = 3.2 mil. All the colors and double colors, inculuding: Black/Black, Black/White, Black/Silver and transparent. Length per roll is according to the customer s order. The weight per square meter / square feet is: 15 micron = 15 gram / 0.6 mil = 0.5 ounce 20 micron = 20 gram / 0.8 mil = 0.6 ounce 25 micron = 25 gram / 1 mil = 0.8 ounce 30 micron = 30 gram / 1.2 mil = 1 ounce 80 micron = 80 gram / 3.2 mil = 26 ounce Please contact us for pricing. 3

meter/foot meter/foot QUEEN GIL LAYFLAT HOSE - COLOR RED LAYFLAT HOSE - INTERNAL DIAMETER 50 mm - 2 Wall Thickness 1,4 mm, Maximum Working pressure 4,5 bar LF50 2.40 100 Wall Thickness 0.05, Maximum Working pressure 65 psi LF50 0.74 328 LF75 LAYFLAT HOSE - INTERNAL DIAMETER 75 mm - 3 Wall Thickness 1,5 mm, Maximum Working pressure 4,0 bar LF75 3.60 100 Wall Thickness 0.06, Maximum Working pressure 55 psi LF75 1.10 328 LAYFLAT HOSE - INTERNAL DIAMETER 100 mm - 4 Wall Thickness 1,5 mm, Maximum Working pressure 4,0 bar LF100 4.54 100 Wall Thickness 0.06, Maximum Working pressure 55 psi LF100 1.39 328 LF100 LAYFLAT HOSE - INTERNAL DIAMETER 150 mm - 6 Wall Thickness 1,8 mm, Maximum Working pressure 3,0 bar LF150 8.22 Wall Thickness 0.07, Maximum Working pressure 42 psi LF150 2.51 164 LF150 Nominal Size I. D. Wall Thickness Std. Length W. P (at 20 0 C) Rolls per pallet mm inch inch feet psi 050 2 0.05 164, 328 65 075 3 0.06 164, 328 58 100 4 0.06 164, 328 58 150 6 0.07 164, 328 43 34 22 15 11 5

QUEEN GIL LAYFLAT HOSE PLASTIC FITTINGS FOR LAYFLAT HOSE - CAMLOCK SYSTEM 354-182 series LAYFLAT COUPLER - MALE CAMLOCK ADAPTER X MALE BSP THREADED Threaded Ø 2" x 2" Layflat 354-182200 7.60 1 Threaded Ø 3" x 3" Layflat 354-182300 10.00 1 Threaded Ø 4" x 4" Layflat 354-182400 16.00 1 LAYFLAT COUPLER - MALE CAMLOCK ADAPTER X HOSE TAIL Ø 2" x 2" 354-183200 7.60 1 Ø 3" x 3" 354-183300 10.00 1 Ø 4" x 4" 354-183400 16.00 1 354-183 series LAYFLAT COUPLER - FEMALE CAMLOCK ADAPTER X MALE BSP THREADED Ø 2" x 2" x 2" 354-184200 7.60 1 Ø 3" x 3" x 3" 354-184300 10.00 1 Ø 4" x 4" x 4" 354-184400 16.00 1 354-184 series 354-185 series LAYFLAT COUPLER - FEMALE CAMLOCK ADAPTER X HOSE TAIL Ø 2" 354-185200 7.60 1 Ø 3" 354-185300 10.00 1 Ø 4" 354-185400 16.00 1 METAL CLAMP FOR LAYFLAT Clamp for Layflat Ø 2" LF-CL 2" 5.60 1 Clamp for Layflat Ø 3" LF-CL 3" 8.40 1 Clamp for Layflat Ø 4" LF-CL 4" 9.20 1 Clamp series 6

CONNECTORS FOR DRIP TAPE IRRIGATION Connection to Distribution Line Connector A8 Connector A22 Connector A8R Connector A22R Connector P6A Connector H12 Connector VD3 Connector L5 Connector L6 Connector L7 6-way Connector A8 - TAPE TO PE PIPE To connect Tape (16,5 mm = 5/8 ) to thin wall PVC Pipe, A8 0.25 1000 A22 - TAPE TO PE PIPE To connect Tape (22,5 mm = 7/8 ) to thin wall PVC Pipe, A22 0.25 1000 A8R - TAPE TO PE WITH RUBBER GASKET To connect Tape (16,5 mm = 5/8 ) to PE-LD distribution line A8R 0.25 1000 A22R - TAPE TO PE WITH RUBBER GASKET To connect Tape (22,5 mm = 7/8 ) to PE-LD distribution line A22R 0.25 1000 P6A - TAPE TO PE WITH RUBBER GASKET+VALVE To connect Tape (16,5 mm = 5/8 ) to PE distribution line P6A 0.63 500 H12 - TAPE x MALE THREADED 1/2 To connect Tape(16,5 mm = 5/8 ) to takeoff collar H12 0.25 1000 VD3 - TAPE x MALE THREADED 1/2 +VALVE To connect Tape (16,5 mm = 5/8 ) to takeoff collar VD3 0.63 1000 Connection to PE Pipe L5 - TAPE TO PE PIPE To connect Tape (16,5 mm = 5/8 ) to PE Pipe Ø 16 mm (5/8 ) L5 0.25 1000 L6 - TAPE TO PE PIPE To connect Tape (16,5 mm = 5/8 ) to PE Pipe Ø 20 mm (1/2 ) L6 0.25 1000 L7 - TAPE TO PE PIPE To connect Tape(16,5 mm = 5/8 ) to PE Pipe Ø 16 mm (5/8 ) L7 0.50 1000 6-WAY CONNECTOR - TAPE TO PE PIPE To connect 6 Tape Lines (16,5 mm = 5/8 ) to PE Supply Line - 6-way Connector 1 x 16 mm (3/8 ) for Drip Tape 54-90165 0.63 10 7

CONNECTORS FOR DRIP IRRIGATION Connection to LayFlat Distribution Line Connector H13 Connector N14 Connector D3 Connector D4 H13 - TAPE TO LAYFLAT To connect Tape (16,5 mm = 5/8 ) to LayFlat distribution line H13 0.63 500 N14 - TAPE TO LAYFLAT To connect Tape (22,5 mm = 7/8 ) to LayFlat distribution line N14 0.63 500 D3 - TAPE TO LAYFLAT+VALVE To connect Tape (16,5 mm = 5/8 ) to LayFlat distribution line D3 0.63 500 D4 - TAPE TO LAYFLAT+VALVE To connect Tape (22,5 mm = 7/8 ) to LayFlat distribution line D4 0.63 500 Connection Tape to Tape Connector R15 Connector T2 Connector M11 R15 - TAPE TO TAPE To connect Tape (12,5 mm = 1/2 ) to Tape (12,5 mm) R15 0.22 500 T2 - TAPE TO TAPE To connect Tape (16,5 mm = 5/8 ) to Tape (16,5 mm) T2 0.22 1000 M11 - TAPE TO TAPE To connect Tape (22,5 mm = 7/8 ) to Tape (22,5 mm) M11 0.50 500 Automatic End Flush Valve Connector G12S Connector G12H Connector G13S Connector G13H G12S - AUTOMATIC FLUSH VALVE, SOFT SPRING To flush Tape lines (16,5 mm = 5/8 ), soft spring G12S 0.63 500 G12H - AUTOMATIC FLUSH VALVE, HARD SPRING To flush Tape lines (16,5 mm = 5/8 ), hard spring G12H 0.63 500 G13S - AUTOMATIC FLUSH VALVE, SOFT SPRING To flush Tape lines (22,5 mm = 7/8 ), soft spring G13S 0.63 500 G13H - AUTOMATIC FLUSH VALVE, HARD SPRING To flush Tape lines (22,5 mm = 7/8 ), hard spring G13H 0.63 500 8

CONNECTORS FOR DRIP TAPE IRRIGATION Connection to PE Pipe Connector R16 R16 - TAPE TO PE PIPE To connect Tape (12,5 mm = 1/2 ) to PE Pipe diameter (16 mm = 5/8 ), R16 0.30 1000 Connection Tape to Tape Connector S7 S7 - TAPE TO TAPE+ VALVE To connect Tape (16,5 mm = 5/8 ) to Tape, can also be used to flush line and to regulate pressure on slopes, S7 0.70 500 G15 - END LINE CONNECTOR G15 0.30 500 End line connector G15 02 Washers Washer 01 04 03 MISCELLANEOUS WASHER/SEAL 02, 03, 04, To connect A8 fittings to PE or PVC distribution line, 02, 03, 04 0.10 1000 WASHER/SEAL 01 To connect L5 fittings to PE or PVC distribution line, 01 0.10 1000 HOOK To hold the Queen Gil DripTape in vertical position along steel wires. Hook Hook 0.10 1000 Hook PLUG B14 - Ø 14MM (17/32 ) To plug unwanted holes in PE pipes, Ø 14 mm, B14 0,10 1000 Plug B14 Plug B16 PLUG B16 - Ø 16MM (5/8 ) To plug unwanted holes in PE pipes, Ø 16 mm, B16 0.10 1000 V19 - DEAD END NUT FOR LAYFLAT 1/2, used to close old or unnecessary holes in the LayFlat, V19 0.10 500 Dead End Nut V19 V20 - FOR LAYFLAT DISTRIBUTION LINE To connect Plug V19 to LayFlat, V20 0.25 500 Connector V20 9

FITTING INSTALLATION TOOLS HAND TOOLS FOR LAYFLAT HOSE PUNCH FOR LAYFLAT HOSE (GREEN/GRAY) used to cut a precise and perfectly round hole into the Layflat and insure a perfect insertion of the Queen Gil connectors, Punch PLF Hole diameter 14 mm (17/32 ) PLF 14 66.00 1 Hole diameter 15 mm (19/32 ) PLF 15 66.00 1 Hole diameter 16 mm (5/8 ) PLF 16 66.00 1 HAND TOOLS FOR PE PIPE Punch PS PUNCH SHORT ARM (BLACK) Used to drill hole into PE supply pipes and to insert A8R connectors, PS 26.00 1 Punch PL PUNCH LONG ARM (BLACK) Used to drill hole into PE supply pipes, PL 26.00 1 PLF Punch used to cut a hole into LayFlat PS (Punch Long Arm), Easy installation of A8R Connector on PE Pipes 10

QUEEN GIL TAPE INSTALLATION TOOLS LAYOUT TOOLS FOR DRIP TAPE SH-EU SHANK FOR ABOVE GROUND TAPE INSTALLATION short tool to be mounted on a tractor and used to place the tape on the ground, labyrinth facing up SH-EU 130.00 1 FL-F SHANK FOR ABOVE GROUND TAPE INSTALLATION long tool to be mounted on a tractor and used to place the tape on the ground, labyrinth facing up FL-F 150.00 1 CA-F SHANK FOR ABOVE GROUND TAPE INSTALLATION long tool to be mounted on a tractor and used to place the tape on the ground, labyrinth facing up - with attachment bar CA-F 160.00 1 Huelva SHANK TWISTED FOR UNDERGROUND TAPE INSTALLATION to be mounted on a tractor to burry the tape, outlets up, specially designed to allow connector passage HU-SP 190.00 1 CA-S-T SHANK TWISTED FOR UNDERGROUND TAPE INSTALLATION long tool to be mounted on a tractor and used to place the tape 5 to 10 cm (2 to 4 ) underground, outlets up - with attachment bar CA-S-T 170.00 1 - with attachment pipe FL-S-T 170.00 1 CA-L-T SHANK TWISTED FOR UNDERGROUND TAPE INSTALLATION long tool to be mounted on a tractor and used to place the tape 25 to 30 cm (10 to 12 ) underground, outlets up - with attachment bar CA-L-T 190.00 1 - with attachment pipe FL-L-T 190.00 1 11

QUEEN GIL SCREEN/DISK FILTERS LF-C, SCREEN FILTERS - BSP or NPT Maximum flow 5 m3/h - 22 gpm; Filtration rate 125 micron LF-C, In-Line Screen Filter 3/4 Inox, 120 mesh 58-0034 4.80 10 LF-CF Filter 1 & 1-1/2 LF-C Filter 2 CF Screen Maximum flow 5 m3/h - 22 gpm; Filtration rate 125 micron LF-C, In-Line Screen Filter 1 Inox, 120 mesh 58-0100 4.80 10 Maximum flow 8 m3/h - 35 gpm; Filtration rate 125 micron LF-C, In-Line Screen Filter 1-1/2 Inox, 120 mesh 58-0150 8.80 10 Maximum flow 16 m3/h - 70 gpm; Filtration rate 125 micron LF-C, In-Line Screen Filter 2 Inox, 120 mesh 58-0200 18.00 10 Maximum flow 20 m3/h - 88 gpm; Filtration rate 125 micron LF-C, In-Line Long Screen Filter 2 Inox, 120 mesh 58-0201 24.00 10 CF Screen Filter Cartridge 1" INOX, 120 Mesh 58-71921 2.80 1 CF Screen Filter Cartridge 1 1/2" INOX, 120 Mesh 58-71922 4.40 1 CF Screen Filter Cartridge 2" INOX, 120 Mesh 58-71923 7.20 1 CF Long Screen Filter Cartridge 2" INOX, 120 Mesh 58-71924 11.20 1 LF-D, DISK FILTERS - BSP or NPT Maximum flow 5 m3/h - 22 gpm; Filtration rate 125 micron; LF-D In-Line Disk Filter 3/4 Inox 120 mesh 58-11034 7.20 10 LF-D 3/4 LF-D 1 Maximum flow 5 m3/h - 22 gpm; Filtration rate 125 micron LF-D In-Line Disk Filter 1 Inox 120 mesh 58-11100 7.20 10 Maximum flow 10 m3/h - 44 gpm; Filtration rate 125 micron LF-D In-Line Disk Filter 1 1/2 Inox 120 mesh 58-11150 14.40 10 Maximum flow 20 m3/h - 88 gpm; Filtration rate 125 micron LF-D In-Line Disk Filter 2 Inox 120 mesh 58-11200 23.60 10 Maximum flow 25 m3/h - 110 gpm; Filtration rate 125 micron LF-D, In-Line Long Disk Filter 2 Inox 120 mesh 58-11201 36.60 10 DF 3/4-1 DF Disk Filter Cartridge 3/4-1" 120 Mesh 58-13410 4.40 1 DF Disk Filter Cartridge 1 1/2" 120 Mesh 58-13150 9.60 1 DF Disk Filter Cartridge 2" 120 Mesh 58-13200 16.80 1 DF Long Disk Filter Cartridge 1 1/2" 120 Mesh 58-13201 26.00 1 12

QUEEN GIL 3 SCREEN AND DISK FILTERS DISK FILTER - BSP or NPT 3 DISK FILTER Flow from 10 to 50 m3/h; Operating pressure 2-10 bar; Backflushing flow 8 m 3 /h,filtration rate 130 micron. Flow from 44 to 220 gpm; Operating pressure 30-145 psi. Filtration rate 120 mesh. Disk FIlter 3 Filter QG DF 3 153.00 1 Filter 3 3 DISK FILTER CARTRIDGE Flow from 10 to 50 m3/h; Operating pressure 2-10 bar; Filtration rate 130 micron. Flow from 44 to 220 gpm; Operating pressure 30-145 psi. Filtration rate 120 mesh Disk FIlter Cartridge 3 QG DFC 3 56.00 1 3 Screen Cartridge SCREEN FILTER - BSP or NPT 3 SCREEN FILTER Flow from 10 to 50 m3/h ; Operating pressure 2-10 bar; Backflushing flow 8m3/h; Filtration rate 130 micron. Flow from 44 to 220 gpm; Operating pressure 30-145 psi. Backflushing flow 35 gpm; Filtration rate 120 mesh. Screen FIlter 3 Filter QG SF 3 176.00 1 3 SCREEN FILTER CARTRIDGE Flow from 10 to 50 m3/h; Operating pressure 2-10 bar; Filtration rate 130 micron. Flow from 44 to 220 gpm; Operating pressure 30-145 psi. Backflushing flow 35 gpm; Filtration rate 120 mesh. Screen FIlter Cartridge 3 QG SFC 3 69.00 1 Disk Cartridge Flow (m3/h) Head Loss (bar) 5,0 0.05 10,0 0.08 15,0 0.12 20,0 0.18 22,0 0.20 24,0 0.22 26,0 0.25 28,0 0.30 30,0 0.35 40,0 0.55 50,0 0.75 Head Losses of the 3 Queen Gil Disk Filter 13 Flow (gpm) Head Loss (psi) 22 0.71 44 1.15 66 1.71 88 2.57 97 2.85 105 3,14 114 3.57 123 4.29 132 5.00 176 7.86 220 10.71

QUEEN GIL SAND FILTERS 80 / 4 MEDIA FILTER Average recommended flow 80 m3/h - 350 gpm; Max. operating pressure 8 bar - 115 psi; Pressure loss: 0.5/0.8 bar - 7-12 psi; Media size: 1 to 2 mm - 0.04-0.08 ; Filtering area: 1.28 m² - 13.78 sqrt ft; Flange DN 100-4 ; Dimensions: lenght 2.08 m - 6 10 ; height: 1.59 m - 6 3 ; width: 0.84 m - 2 9 ; weight: 300kg - 660 p (without media). FG 80/4 3600.00* 1 Note: * price is ex works, without any accessory WE ALSO SUPPLY COMPLETE FILTRATION SYSTEMS (SEE BELOW); PLEASE ASK FOR A QUOTE. A complete Queen Gil Filtration System: FG 80/4 + 2 Disk Filters + a Fertilizer injector Media Filter FG 80/4 with inlet collector Name FG 80/4 Nominal flow rate, m3/h - gpm 80-350 Recommended flow rate, m3/h - gpm 265-1166 The area of a filtering surface, m² - square feet 1.28-13.78 Working pressure (max), bar - psi 8-115 Counterwashing of the filter at pressure loss, bar - psi 0.5/0.8-7/11 Size of gravel 1/2-0.04/0.08 Gravel quantity, pounds 600-1320 Collector diameter, Inlet (flange) mm - inch 100-4 Outlet (thread) mm - inch 100-4 Overall dimensions Filter Characteristics Length (metric - us) 2.08-6 10 Width (metric - us) 0.84-2 9 Height (metric - us) 1.59-6 3 Weight, kg - pounds (without gravel) 300-660 14

QUEEN GIL PRESSURE GAUGES PRESSURE GAUGES DRY PRESSURE GAUGES For standard conditions PG OPG PG Pressure Gauge : 0-6 bar - 0-87 psi 37-0600 6.20 1 PG Pressure Gauge : 0-10 bar -0-145 psi 37-0100 6.20 1 OPG - OIL FILLED PRESSURE GAUGES For difficult conditions OPG Oil Filled Pressure Gauge : 0-6 bar - 0-87 psi 37-0601 11.60 1 OPG Oil Filled Pressure Gauge : 0-10 bar -0-145 psi 37-0610 11,60 1 PRESSURE GAUGE ACCESSORIES PRESSURE GAUGE CONNECTORS - BSP or NPT PC-1/4 - PC-3mm PB GC F PC - 1/4 37-0614 0.80 10 PC - 3mm 37-0603 0.80 10 PRESSURE GAUGE BASE - BSP or NPT PB - 1/4 37-0604 0.28 10 GCF - FEMALE PRESSURE GAUGE CONNECTOR - BSP or NPT Female Connector - 1/4 37-1111 1.60 10 GCM - FEMALE PRESSURE GAUGE CONNECTOR - BSP or NPT Pressure Gauge Connector Male - Female 1/4 x 1/2 37-1214 1.60 10 GC M How to connect Pressure Gauge on PE-LD How to connect Pressure Gauge on PE-HD and PVC 15

QUEEN GIL VENTURI FERTILIZER INJECTOR VENTURI FERTILIZER INJECTOR 1/2 - BSP or NPT inlet pressure from 0.75 to 5.5 bar - 11 to 80 psi; total water flow (P) 0.6 to 1.92 m3/h - 2.5 to 8.5 gpm. Injection rate (Q) : 30 to 193 l/h - 8 to 51 gph; Ventury Injector Valve 1/2 59-44012 21.00 1 Venturi Injector 1/2 VENTURI FERTILIZER INJECTOR 3/4 - BSP or NPT inlet pressure from 0.75 to 5.5 bar - 11 to 80 psi; total water flow (P) 0.6 to 1.92 m3/h - 2.5 to 8.5 gpm. Injection rate (Q) : 30 to 193 l/h - 8 to 51 gph; Ventury Injector Valve 3/4 59-44034 21.00 1 Venturi Injector 3/4 VENTURI FERTILIZER INJECTOR 1 - BSP or NPT inlet pressure from 0.75 to 5.5 ba - 11 to 80 psr; total flow (P) 2.88 to 6.9 m3/h - 12.7 to 30.5 gpm. Injection rate (Q) : 105 to 550 l/h - 28 to 145 gph ; Ventury Injector Valve 1 59-44100 28.00 1 Venturi Injector 1 VENTURI FERTILIZER INJECTOR 1-1/2 - BSP or NPT inlet pressure from 0.75 to 5.5 bar - 11 to 80 ps; total flow (P) 3.78 to 11.7 m3/h - 16.5 to 51.5 gpm. Injection rate (Q) : 120 to 1200 l/h - 31 to 317 gph; Ventury Injector Valve 1-1/2 59-44150 50.00 1 VENTURI FERTILIZER INJECTOR 2 - BSP or NPT inlet pressure from 0.75 to 5.5 bar- 11 to 80 ps; total water flow (P) 10.32 to 30.1 m3/h - 45.5 to132.5 gpm. Injection rate (Q) : 580 to 2640 l/h - 153 to 698 gph; Ventury Injector Valve 2 59-44200 70.00 1 In-line Installation By-Pass Installation 16

QUEEN GIL PRESSURE REGULATORS PRESSURE REGULATORS PR-1 REGULATORS -3/4 - BSP or NPT Minimum flow 0.8 m3/h - 3.5 gpm; maximum flow 5 m3/h - 22 gpm Regulated outlet pressure 0.6 bar - 16 psi. Pressure Regulator 0.6 bar - 3/4 339-34006 4.80 1 PR-1 Regulator Minimum flow 0.8 m3/h - 3.5 gpm; maximum flow 5 m3/h - 22 gpm Regulated outlet pressure 1.1 bar - 16 psi. Pressure Regulator 1.4 bar - 3/4. 339-34011 4.80 1 PR-2 REGULATORS - 1-1/2 - BSP or NPT Minimum flow 1.6 m3/h - 7 gpm; maximum flow 10 m3/h - 44 gpm Regulated outlet pressure 1.1 bar - 16 psi. Pressure Regulator 1.1 bar - 1 1/2 39-15011 9.60 1 PR-2 Regulator Minimum flow 1.6 m3/h - 7 gpm; maximum flow 10 m3/h - 44 gpm Regulated outlet pressure 1.4 bar - 20 psi. Pressure Regulator 1.4 bar - 1 1/2 39-15014 9.60 1 PR-6 REGULATORS - 2 - BSP or NPT Minimum flow 4.8 m3/h; maximum flow 30 m3/h - 132 gpm Regulated outlet pressure 1.1 bar - 16 psi. Pressure Regulator 1.1 bar - 2 39-20011 80.00 1 PR-6 Regulator Minimum flow 4.8 m3/h; maximum flow 30 m3/h - 132 gpm Regulated outlet pressure 1.4 ba - 20 psi. Pressure Regulator 1.4 bar - 2 39-20014 80.00 1 PR-10 REGULATORS - 3 - BSP or NPT Minimum flow 8.0 m3/h; maximum flow 50 m3/h - 220 gpm Regulated outlet pressure 1.1 ba - 16 psi. Pressure Regulator 1.1 bar- 3 39-30011 160.00 1 PR-10 Regulator Minimum flow 8.0 m3/h; maximum flow 50 m3/h - 220gpm Regulated outlet pressure 1.4 bar - 20 psi. Pressure Regulator 1.4 bar - 3 39-30014 160.00 1 V34 REGULATOR CARTRIDGE VC35 To replace an existing Cap Spring Regulating Cartridges; Regulated outlet pressure 1.1 bar - 16 psi. V34 Regulator Cartridge V34 2.20 1 17

QUEEN GIL PLASTIC PRESSURE REGULATING VALVES PLASTIC PRESSURE REGULATINGVALVES Applications Used on mainlines these pressure regulating valves allow dynamic regulation of the flow. The manual opening/closing allows opening of the valve wirhout external water drain. Features Globe and Y configuration for high flow rates and low headloss. Female threaded inlet and outlet, size 2" and 3" BSP and NPT. Constructed of corrosion-resistant high engineering plastics. Materials: - Body and bonnet: reinforced nylon - All metal parts: Stainless Steel - Diaphragm: natural rubber - Seals: Buna-N and NR Operation under a wide range of pressures: - Operating pressure range: 0.7-10 bar, (10-150 psi) Smooth valve opening and closing prevents pressure surge problems Flow control handle for water flow adjustment Temperature range - water up to 80º C, (180º F). Please consult us for more Specifications and Quotes. Automatic Plastic Pressure Regulating Valve 2 APPRV 2 130.00 1 Automatic Plastic Pressure Regulating Valve 3 APPRV 3 210.00 1 18

QUEEN GIL AIR VENTS AND VACUUM BREAKERS AIR VENTS 1 BSP AIR VENT Max. Working pressure 10 bar - 144 psi. Air extraction 50 m3/h - 220 gpm. AV1 5.20 1 1 Air Vent AV- 1 BSP AIR VENTS Working pressure from 0.2 to16 bar - 2.9 to 232 psi. Air extraction 95 m3/h - 418 gpm. 39-33100 21.00 1 AV - 2 BSP AIR VENTS Working pressure from 0.2 to 16 bar - 2.9 to 232 psi, Air extraction 95 m3/h - 418 gpm. 39-33200 44.10 1 1 and 2 Air Vents AIR VENTS AND VACUUM BREAKERS AVV - 1 BSP AIR VENTS AND VACUUM BREAKERS Working pressure from 0.2 to 16 bar - 2.9 to 232 psi. Air extraction 365 m3/h - 1600 gpm. 39-34100 96.00 1 1 and 2 AVV AVV - 2 BSP AIR VENTS AND VACUUM BREAKERS Working pressure from 0.2 to 16 bar - 2.9 to 232 psi. Air extraction 365 m3/h - 1600 gpm. 39-34200 239.00 1 PERFORMANCES OF QUEEN GIL AIR VENTS AND VACUUM BREAKERS 1 and 2 AV AIr Vents 1 and 2 AVV Air Vents and vacuum breakers 19

QUEEN GIL PLASTIC IMPACTS SPRINKLERS PLASTIC IMPACT SPRINKLERS RC-150 Sprinkler RC-150 FULL CIRCLE DUAL NOZZLE IMPACT SPRINKLERS - 1/2 BSP or NPT MALE Hooded 1/2 BSP Bearing for longer life in dirty conditions. Quick Fit Plastic Color coded Nozzles for easy installation and identification. Delivered with 3 Nozzles (2.5, 3.0, 3.5 mm) and a plug; Working Pressure Range: 2.0 to 4.0 bar - 28.5 to 57 psi; Flow: 0.66 to 0.96 m3/h - 2.9 to 4.2 gpm; Radius: 9 to 12 m - 30 to 39. RC 150 Sprinkler 1/2 55-01150 2.20 10 Nozzle Size Pressure (bar / psi) Radius - m / ø - foot Flow (m3/h / gpm) SH-1/2 Base 1C-2M Connector Base Plug P-12M R 100 Rod PLASTIC SPRINKLER ACCESORIES SH-1/2 PLASTIC MINISPRINKLER BASE 1/2 Female threaded x barbed S12 mm -.47 (for PEPipe Conection); Used to install RC-150 Plastic Sprinkler on R 100 metal Rod. (See Installation Details below). 2.0-28.5 9.0-29.5 0.35-1.54 2.5 mm 3.0-42.8 9.5-62.4 0.42-1.85 4.0-57.1 10.0-65.6 0.49-2.16 2.0-28.5 10.7-70.2 0.51-2.24 3.0 mm 3.0-42.8 11.0-72.2 0.65-2.86 4.0-57.1 11.7-76.8 0.75-3.30 3.5 mm 3.0-28.5 11.5-75.4 0.85-3.74 RC-150 Performance Data SH Sprinkler Base 53-0011 0.40 100 1C-12M PLASTIC MINICONNECTOR WITH GROMMET Used to connect a 12 mm -.47 Plastic Pipe to Plastic Supply Line; (See Installation Details below). 1C-12M Miniconnector for 12 mm Pipe 53-0012 0.20 100 P-12M BASE PLUG 12 MM Used to plug a Hole in a Plastic Pipe; P-12M Base End Plug 12 mm 53-0013 0.04 100 R 100 ALUMINIUM ROD Length 1 meter x 10 mm - 3.3 x.4. Used to hold vertically the Sprinkler Assembly; (See Installation Details). R 100 Sprinkler Rod 53-0010 0.60 100 Installation Details COMPLETE SPRINKLER ASSEMBLY Include1 x SH-1/2 + 1X 1C-12M + 1 x P-12M + 1 x R 100 (60 cm) + 80 cm of 12 mm PE Hose. RC-150 Assembly 3.80 20

QUEEN GIL PLASTIC IMPACTS PRINKLERS PLASTIC IMPACT SPRINKLERS 55 011 Sprinkler Ideal for undertree Irrigation. FULL CIRCLE LOW ANGLE TRAJECTORY - 1/2 MALE BSP or NPT Quick Fit Plastic Color coded Nozzles for easy installation and identification. Delivered with 3 Nozzles, sizes 2.5, 3.0, 3.5 mm and a plug; low angle (12 ) trajectory; Working Pressure Range: 1.5 to 4.5 bar - 21 to 65 psi; Flow: 0.36 to 1.20 m3/h - 1.58 to 5.3 gpm; Radius: 7.5 to 11.5 m - Diam.: 49.2 to 75.4. RC 151 Low angle, single nozzle Sprinkler 1/2 55-11150 2.20 10 Ideal for portable or permanent Irrigation. RC-160 Sprinkler RC-160 FULL CIRCLE DUAL NOZZLE IMPACT SPRINKLERS - 3/4 MALE BSP ornpt Hooded 3/4 BSP Bearing for longer life in dirty conditions. Quick Fit Plastic Color coded Nozzles for easy installation and identification. Delivered with 6 Nozzles, Sizes: 2.5, 3.0, 3.5, 5.0, 5.5, 6.5 mm and a plug; Working Pressure Range: 2.5 to 5.0 bar - 35 to 72 psi; Flow: 0.90 to 2.40 m3/h - 4.0 to 10.6 gpm; Radius: 12 to 14 m - Diam.: 79 to 92. RC 160 Sprinkler 3/4 55-0160 5.60 10 RC-260 Sprinkler RC-260 FULL CIRCLE DUAL NOZZLE IMPACT SPRINKLERS - 1 MALE BSP ornpt Hooded 1 BSP Bearing for longer life in dirty conditions. Quick Fit Plastic Color coded Nozzles for easy installation and identification. Delivered with 6 Nozzles, Sizes: 2.5, 3.0, 3.5, 5.0, 5.5, 6.5 mm and a plug; Working Pressure Range: 3.0 to 5.0 bar - 43 to 72 psi; Flow: 3.18 to 6.60 m3/h - 14 to 29 gpm; Radius: 15 to 20 m - 98 to 131. RC 260 Sprinkler 1 55-0260 7.20 10 Nozzle Size Pressure (bar/psi) Radius (m) - ø (ft) Flow (m3/h-gpm) Nozzle Size Pressure (bar/psi) Radius (m) - ø (ft) Flow (m3/h-gpm) 3.0 mm 3.0-42.8 13.0 0.72-3.2 5.0-71.5 13.8 0.85-3.8 4.0 mm 3.0-42.8 14.5 1.05-4.6 5.0-71.5 15.6 1.30-5.7 5.5 mm 3.0-42.8 16.5 2.06-9.1 5.0-71.5 17.6 2.50-11.0 4.5 mm 5.0 mm 6.0 mm 3.0-42.8 16.1-105.6 1.26-5.5 5.0-71.5 17.0-111.6 1.62-7.2 3.0-42.8 17.0-111.6 1.80-7.9 5.0-71.5 18.0-118.1 2.30-10.2 3.0-42.8 18.5-121.4 2.36-10.4 5.0-71.5 19.5-127.9 3.00-13.2 RC-160 Performance Data RC-260 Performance Data 21

QUEEN GIL PLASTIC ROTOR SPRINKLERS Rotating Stream Micro-Sprinklers ideal for Undertree Orchard Irrigation, Vegetable and Greenhouses Irrigation. RS-D, FULL CIRCLE ROTOR SPRINKLERS - 1/2 FEMALE Single bridge, One jet, Rotor Sprinklers; Working Pressure Range: 1.5 to 3.0 bar - 22 to 44 psi Model 150 liter/hour - 40 gph; Radius: 4.0 to 5.0 m - 13 to 16.5. RS-D Rotor Sprinkler Super-R Super-D Max 300 SP I RS-D Rotor Sprinkler 150 l/h 53-11300 0.32 100 Model 250 liter/hour - 66 gph; Radius: 5.0 to 7.0 m- 16 to 23. RS-D Rotor Sprinkler 250 l/h 53-11500 0.32 100 SUPER-R, FULL CIRCLE ROTARY SPRINKLER - 1/2 FEMALE Dual Bridge to accomodate hardest conditions. Working Pressure Range: 1.0 to 3.0 bar - 14 to 44 psi Flow: 420 to 750 l/h - 110 to 198 gph; Radius: 5.0 m - 16.5. Super-R Rotary Sprinkler 53-11101 0.40 100 SUPER-D, FULL CIRCLE DISK SPRINKLER - 1/2 FEMALE Dual Bridge to accomodate hardest conditions. Working Pressure Range: 1.0 to 3.0 bar - 20 to 45 psi Flow: 420 to 750 l/h - 110 to 198 gph; Radius: 5.0 m - 16.5. Super-D Disk Sprinkler 53-11103 0.40 100 MAX 300, FULL CIRCLE ROTARY SPRINKLERS - 1/2 FEMALE Single Bridge. Rotating Spinner Device. Working Pressure Range: 1.0 to 3.0 bar - 20 to 45 psi Flow: 550 to 1100 l/h - 145 to 290 gph; Radius: 5.0 m - 16.5. MAX 300 Sprinkler 53-0014 0.24 100 SP I, FULL CIRCLE BLADE SPRINKLER - 1/2 FEMALE Dual Bridge to accomodate hardest conditions. Working Pressure Range: 1.0 to 3.0 bar - 20 to 45 ps; Flow: 420 to 750 l/h - 110 to 198 gph; Radius: 7.0 m - 23. SP I Blade Sprinkler 53-0031 0.48 100 SP B, FULL CIRCLE BLADE SPRINKLER - 1/2 FEMALE Dual Bridge to accomodate hardest conditions. Working Pressure Range: 1.0 to 3.0 bar - 20 to 45 psi Flow: 820 to 1500 l/h - 215 to 395 gph; Radius: 7.0 m - 23. SP B Blade Sprinkler 53-0016 0.60 100 SP B 22

QUEEN GIL PLASTIC ROTOR SPRINKLERS - Continued SP II SP R SP II, FULL CIRCLE ROTARY SPRINKLER - 1/2 FEMALE Dual Bridge to accomodate hardest conditions. Working Pressure Range: 1.0 to 3.0 bar - 15 to 44 psi Flow: 420 to 750 l/h - 110 to 198 gph; Radius: 5.0 m - 16.5. SP II Rotary Sprinkler 53-0032 0.48 100 SP R, FULL CIRCLE ROTARY SPRINKLER - 1/2 FEMALE Dual Bridge to accomodate hardest conditions. Working Pressure Range: 1.0 to 3.0 bar - 15 to 45 psi Flow: 600 to 1100 l/h - 158 to 290 gph; Radius: 5.0 m - 16.5. SP R Rotary Sprinkler 53-0019 0.60 100 PLASTIC ROTOR SPRINKLERS SETS Complete Rotor Sprinklers Assemblies for easier Installation. SP B+SC SP B+SQ SP R+SC SP R+SQ SP B+SC, COMPLETE SPRINLER ASSEMBLY Assembly including: SP B, Blade Sprinkler installed on a SC, Stake with Barbed Hose Connection. SP B Blade Sprinkler with Hose Connecting Spike 53-0024 1.36 100 SP B+SQ, COMPLETE SPRINLER ASSEMBLY Assembly including: SP B, Blade Sprinkler installed on a SQ, Stake with Quick Coupling Type Connection. SP B Blade Sprinkler with Quick Coupling Spike 53-0025 1.40 100 SP R+SC, COMPLETE SPRINLER ASSEMBLY Assembly including: SP R, Rotary Sprinkler installed on a SC, Stake with Barbed Hose Connection. SP R Rotary Sprinkler with Hose Connecting Spike 53-0026 13600 100 SP R+SQ, COMPLETE SPRINLER ASSEMBLY Assembly including: SP R, Rotary Sprinkler installed on a SQ, Stake with Quick Coupling Type Connection. SP R Rotary Sprinkler with Quick Coupling Spike 53-0027 1.40 100 23

.QUEEN GIL PLASTIC ROTOR SPRINKLERS - ACCESSORIES PR, PLASTIC SPRINKLERS RISERS, MALE x MALE THREADED 1/2 Male x Male plastic Sprinkler riser; Used to hold Sprinklers vertically and supply water to Plastic Rotor Sprinklers PR Riser - Ext. Pipe 50 cm; 1/2 = 1.65 x 1/2 - Male Thread 53-12050 1.20 20 - Ext. Pipe 100 cm; 1/2 = 3.28 x 1/2 - Male Thread 53-12100 2.00 20 - Ext. Pipe 150 cm; 1/2 = 4.92 x 1/2 - Male Thread 53-12150 3.20 20 - Ext. Pipe 50 cm; 3/4 = 1.65 x 3/4 - Male Thread 53-34050 1.60 20 - Ext. Pipe 100 cm; 3/4 = 3.28 x 3/4 - Male Thread 53-34100 2.80 20 - Ext. Pipe 150 cm; 3/4 = 4.92 x 3/4 - Male Thread 53-34150 4.00 20 - Ext. Pipe 50 cm; 1 = 1.65 x 1 - Male Thread 53-10050 2.00 20 - Ext. Pipe 100 cm; 1 = 3.28 x 1 - Male Thread 53-10100 3.60 20 - Ext. Pipe 150 cm; 1 = 4.92 x 1 - Male Thread 53-10150 5.60 20 SQ, PLASTIC STAKE - 1/2 FEMALE Plastic Stake with Quick Coupling Type Connection for Water Supply; Used to install Plastic Rotor for low cost Installations. Quick Coupling Spike 53-0028 0.80 100 SQ Stake SC, PLASTIC STAKE - 1/2 FEMALE Plastic Stake with Barbed Hose Connection for Water Supply; Used to install Plastic Rotor for low cost Installations. Hose Connecting Spike 53-0029 0.80 100 SC Stake MC 30 MC 30, STAND - 1/2 MALE X MALE This Plastic extension is used to add an extra length (30 cm) to the sprinkler height. Several MC 30 can be used if necessary (see installation details next page) Extension Pipe 30 cm -1 ; 1/2 Male thread 53-0022 1.00 100 MCC MCC - 1/2 FEMALE SOCKET This Plastic Socket is used to connect together several MC 30 (see installation details next page). Female Socket 1/2 53-0030 0.20 100 24