Coordinate Measuring Machines CRYSTA-APEX (Standard Accuracy) Pages 602 to 607 STRATO-APEX (High Accuracy) Page 608 FALCIO-APEX (High Accuracy Large type) Pages 608, 609 LEGEX (Ultra-high Accuracy) Page 610 CARBstrato Apex (Car Body Measuring system) Page 611 MACH (High Speed In-line CMM) Page 612, 613 CRYSTA-PLUS M Manual CMM Page 614 SpinArm- Apex / SpaceMeasure Portable Mobile Technologies Page 615 Probes and Software Pages 616, 618 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended 601
CRYSTA-APEX S500 Series Series 191 - Standard CNC CMM Designed and constructed using Mitutoyo's wealth of experience in CNC CMM technology, CRYSTA-APEX S features lightweight materials and an innovative machine structure, providing high motion stability, high accuracy, and affordability. The temperature compensation function (16 C to 26 C) can yield accurate measurements even on the shop floor. Compatible vision and scanning probe technologies are employed to provide flexible and effective measurement capabilities. Accuracy (1) E 0,MPE : ±(1,7+0,3L/100)µm, ±(1,7+0,4L/100)µm (²) P FTU,MPE : 1,7 µm MPE THP : 2,3 µm (50s) Work table material Black granite Work table tapped M8 x 1.25 mm insert Max. height : 545 mm Max. loading : 180 kg High accuracy linear encoder Air bearings on each axis 520 mm/sec Max. acceleration Each axis : 1333 mm/s 2 (0,13G) Max. combined acceleration : 2309 mm/s 2 (0,23G) (¹) According to ISO 10360-2 (2010) methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. (²) Specified accuracy for temperature range: 16-26 C. Joystick controller (optional) Accuracy is specified for the following environmental conditions for the CMM*: 18 C - 16 C - 22 C 26 C Per hour 1.0 K 1.0 K Per 24 hours 2.0 K 5.0 K Vertical Horizontal * When using temperature compensation system CRYSTA-Apex S544 Model CRYSTA-Apex S544 CRYSTA-Apex S574 No. 191-244 191-248 191-243 191-247 Range X x Y x Z axis 505 x 405 x 405 mm 505 x 705 x 405 mm Work table size 638 x 860 mm 638 x 1160 mm Mass (main unit) 515 kg 625 kg 191-244 and 191-248 : multiwire models The prices listed are suggested retail prices (valid until 31 602 st May 2013). Inch products and combined inch/metric products are generally intended
CRYSTA-APEX S700 Series Accuracy (1) E 0,MPE : ±(1,7+0,3L/100)µm, ±(1,7+0,4L/100)µm (²) P FTU,MPE : 1,7 µm MPE THP : 2,3 µm (50s) Work table material Black granite Work table tapped M8 x 1.25 mm insert High accuracy linear encoder Series 191 - Standard CNC CMM Designed and constructed using Mitutoyo's wealth of experience in CNC CMM technology, CRYSTA-APEX S features lightweight materials and an innovative machine structure, providing high motion stability, high accuracy, and affordability. The temperature compensation function (16 C to 26 C) can yield accurate measurements even on the shop floor. Compatible vision and scanning probe technologies are employed to provide flexible and effective measurement capabilities. Air bearings on each axis 520 mm/sec Max. acceleration Each axis : 1333 mm/s 2 (0,13G) Max. combined acceleration : 2309 mm/s 2 (0,23G) (¹) According to ISO 10360-2 (2010) methods when using the SP25M probe system module with a ø 4x50 mm stylus. (²) Specified accuracy for temperature range: 16-26 C. compensation system (photo : temperature sensors) The machine structure has been optimized using FEM (Finite-element Method) and modal analysis Refer to the CRYSTA-APEX S brochure CRYSTA-Apex S776 Model CRYSTA-APEX S776 CRYSTA-APEX S7106 No. 191-252 191-254 Range X x Y x Z axis 705 x 705 x 605 mm 705 x 1005 x 605 mm Work table size 880 x 1420 mm 880 x 1720 mm Max. height : 800 mm Max. height : 800 mm Max. loading : 800 kg Max. loading : 1000 kg Mass (main unit) 1675 kg 1951 kg The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 603
CRYSTA-APEX S900 Series Series 191 - Standard CNC CMM Designed and constructed using Mitutoyo's wealth of experience in CNC CMM technology, CRYSTA- APEX S features lightweight materials and an innovative machine structure, providing high motion stability, high accuracy, and affordability. The temperature compensation function (16 C to 26 C) can yield accurate measurements even on the shop floor. Compatible vision and scanning probe technologies are employed to provide flexible and effective measurement capabilities. Accuracy (1) E 0,MPE : ±(1,7+0,3L/100)µm, ±(1,7+0,4L/100)µm (²) P FTU,MPE : 1,7 µm MPE THP : 2,3 µm (50s) Work table material Black granite Work table tapped M8x1.25mm insert High accuracy linear encoder Air bearings on each axis 520 mm/sec Max. acceleration Each axis : 1333 mm/s 2 (0,13G) (1000 mm/s 2 9108, 9168 and 9208) Max. combined acceleration : 2309 mm/s 2 (0,23G) (1732 mm/s 2 9108, 9168 and 9208) (¹) According to ISO 10360-2 (2010) methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. (²) Specified accuracy for temperature range: 16-26 C. compensation system (photo : temperature sensors) CRYSTA-Apex S9106 Model CRYSTA-Apex CRYSTA-Apex CRYSTA-Apex CRYSTA-Apex CRYSTA-Apex CRYSTA-Apex S9106 S9108 S9166 S9168 S9206 S9208 No. 191-292 191-292H 191-294 191-294H 191-296 191-296H Range X x Y x Z axis 905 x 1005 x 905 x 1005 x 905 x 1605 x 905 x 1605 x 905 x 2005 x 905 x 2005 x 605 mm 805 mm 605 mm 805 mm 605 mm 805 mm Work table size 1080x1720mm 1080x1720mm 1080x2320mm 1080x2320mm 1080x2720mm 1080x2720mm Max. height : 800mm Max. loading : 1200kg Max. height : 1000mm Max. loading : 1200kg Max. height : 800mm Max. loading : 1500kg Max. height : 1000mm Max. loading : 1500kg Max. height : 800mm Max. loading : 1800kg Max. height : 1000mm Max. loading : 1800kg Mass (main unit) 2231 kg 2261 kg 2868 kg 2898 kg 3912 kg 3942 kg Refer to the CRYSTA-APEX S brochure Accuracy is specified for the following environmental conditions for the CMM*: 18 C - 16 C - 22 C 26 C Per hour 1.0 K 1.0 K Per 24 hours 2.0 K 5.0 K Vertical Horizontal *When using temperature compensation system The prices listed are suggested retail prices (valid until 31 604 st May 2013). Inch products and combined inch/metric products are generally intended
CRYSTA-APEX S1200 Series Accuracy(¹) S1200 E 0,MPE : ±(2,3+0,3L/ 100)µm, ±(2,3+0,4L/ 100)µm (²) P FTU,MPE : 2,0 µm MPE THP : 2,8 µm (50s) Accuracy(¹)S1600 E 0,MPE : ±(3,3+0,45L/ (191-262-2/-272-2/ 100)µm, ±(3,3+0,55L/ -282-2) 100)µm (²) P FTU,MPE : 5,0 µm MPE THP : 6,0 µm (120s) Accuracy(¹)S1600 (191-262H-2/-272G-2/ -282H-2) Work table material Work table tapped insert E 0,MPE : ±(4,5+0,55L/ 100)µm, ±(4,5+0,4L/ 100)µm (²) P FTU,MPE : 6,0 µm MPE THP : 7,0 µm (120s) Black granite M8 x 1.25 mm High accuracy linear encoder Air bearings on each axis Series 191 - Standard CNC CMM Designed and constructed using Mitutoyo's wealth of experience in CNC CMM technology, CRYS- TA-APEX C features lightweight materials and an innovative machine structure, providing high motion stability, high accuracy, and affordability. The temperature compensation function (16 C to 26 C) can yield accurate measurements even on the shop floor. Compatible vision and scanning probe technologies are employed to provide flexible and effective measurement capabilities. Accuracy is specified for the following environmental conditions for the CMM*: 18 C - 16 C - 22 C 26 C Per hour 1.0 K 1.0 K Per 24 hours 2.0 K 5.0 K Vertical Horizontal *When using temperature compensation system 520 mm/sec Max. acceleration Each axis : 980 mm/s 2 (0,1G) Max. combined acceleration : 1667 mm/s 2 (0,16G) (¹) According to ISO 10360-2 (2010) methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. (²) Specified accuracy for temperature range: 16-26 C. Crysta-Apex S122010 Model CRYSTA-APEX S121210 CRYSTA-APEX S122010 CRYSTA-APEX S123010 No. 191-392 191-394 191-396 Range X x Y x Z axis 1205 x 1205 x 1005 mm 1205 x 2005 x 1005 mm 1205 x 3005 x 1005 mm Work table size 1400 x 2165 mm 1400 x 2965 mm 1400 x 3965 mm Max. height : 1200 mm Max. height : 1200 mm Max. height : 1200 mm Max. loading : 2000 kg Max. loading : 2500 kg Max. loading : 3000 kg Mass (main unit) 4050 kg 6150 kg 9110 kg CRYSTA-APEX C1600 Series Series 191 - Standard CNC CMM Joystick controller The machine structure has been optimized using FEM (Finite-Element Method) and modal analysis Model CRYSTA-APEX C163012 CRYSTA-APEX C164012 CRYSTA-APEX C165012 No. 191-262-2 191-272-2 191-282-2 Range X x Y x Z axis 1605 x 3005 x 1205 mm 1605 x 4005 x 1205 mm 1605 x 5005 x 1205 mm Work table size 1800 x 4205 mm 1800 x 5205 mm 1800 x 6205 mm Max height : 1400 mm Max. height : 1400 mm Max. height : 1400 mm Max. loading : 3500 kg Max. loading : 4500 kg Max. loading : 5000 kg Mass (main unit) 10600 kg 14800 kg 19500 kg Model CRYSTA-APEX C163016 CRYSTA-APEX C164016 CRYSTA-APEX C165016 No. 191-262H-2 191-272H-2 191-282H-2 Range X x Y x Z axis 1605 x 3005 x 1605 mm 1605 x 4005 x 1605 mm 1605 x 5005 x 1605 mm Work table size 1800 x 4205 mm 1800 x 5205 mm 1800 x 6205 mm Max. height : 1800 mm Max. height : 1800 mm Max. height : 2200 mm Max. loading : 3500 kg Max. loading : 4500 kg Max. loading : 5000 kg Mass (main unit) 10650 kg 14850 kg 19550 kg The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 605
CRYSTA-APEX C2000 Series Series 191 - Standard CNC CMM Designed and constructed using Mitutoyo's wealth of experience in CNC CMM technology, CRYS- TA-APEX C features lightweight materials and an innovative machine structure, providing high motion stability, high accuracy, and affordability. The temperature compensation function (16 C to 26 C) can yield accurate measurements even on the shop floor. Compatible vision and scanning probe technologies are employed to provide flexible and effective measurement capabilities. Accuracy(¹) (191-362-2/ E 0,MPE : ±(4,5+0,8L/100)µm, -372-2/-382-2) ±(4,5+0,9L/100)µm (²) P FTU,MPE : 6,0 µm MPE THP : 6,0 µm (150s) Accuracy(¹) (191-362H-2/ -372H-2/-382H-2) Work table material Work table tapped insert E 0,MPE : ±(6+0,8L/100)µm, ±(6+L/100)µm (²) P FTU,MPE : 7,5 µm MPE THP : 7,5 µm (150s) Black granite M8x1.25mm High accuracy linear encoder Air bearings on each axis 520 mm/sec Max. acceleration Each axis : 1333 mm/s 2 (0,13G) Max. combined acceleration : 2309 mm/s 2 (0,23G) (¹) According to ISO 10360-2 (2010) methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. (²) Specified accuracy for temperature range: 16-26 C. compensation system (photo : temperature sensors) Joystick controller CRYSTA-Apex C205016 Model Crysta-Apex C203016 Crysta-Apex C204016 Crysta-Apex C205016 No. 191-362-2 191-372-2 191-382-2 Range X x Y x Z axis 2005 x 3005 x 1605 mm 2005 x 4005 x 1605 mm 2005 x 5005 x 1605 mm Work table size 2200 x 4205 mm 2200 x 5205 mm 2200 x 6205 mm Max. height : 1800 mm Max. height : 1800 mm Max. height : 1800 mm Max. loading : 4000 kg Max. loading : 5000 kg Max. loading : 6000 kg Mass (main unit) 14100 kg 19400 kg 28000 kg Model Crysta-Apex C203020 Crysta-Apex C204020 Crysta-Apex C205020 No. 191-362H-2 191-372H-2 191-382H-2 Range X x Y x Z axis 2005 x 3005 x 2005 mm 2005 x 4005 x 2005 mm 2005 x 5005 x 2005 mm Work table size 2200 x 4205 mm 2200 x 5205 mm 2200 x 6205 mm Max.height : 2200 mm Max. height : 2200 mm Max.height : 2200 mm Max. loading : 4000 kg Max. loading : 5000 kg Max. loading : 6000 kg Mass (main unit) 14150 kg 19450 kg 28050 kg The machine structure has been optimized using FEM (Finite-Element Method) and modal analysis Accuracy is specified for the following environmental conditions for the CMM*: 18 C - 16 C - 22 C 26 C Per hour 1.0 K 1.0 K Per 24 hours 2.0 K 5.0 K Vertical Horizontal *When using temperature compensation system The prices listed are suggested retail prices (valid until 31 606 st May 2013). Inch products and combined inch/metric products are generally intended
CRYSTA-APEX C2000/3000 Series High accuracy linear encoder Air bearings on each axis Series 191 - Standard Large CNC CMM This large gantry style CNC CMM provides a huge measuring range of 2000 x 3000 x 1600 mm to 3000 x 6000 x 2000 mm yet still offers excellent accuracy. 500 mm/sec Accuracy is specified for the following environmental conditions for the CMM*: 18 C - 16 C - 22 C 26 C Per hour 1.0 K 1.0 K Per 24 hours 2.0 K 5.0 K Vertical Horizontal *When using temperature compensation system Safety System For this type series, Mitutoyo offers a customized safety system. Depending on the local situation in your facility, Mitutoyo will propose a tailor-made solution meeting the requirements of the machinery directive. Foundation This type series always requires a special foundation. Please contact your local Mitutoyo partner for further details. CRYSTA-Apex C203016G No. Crysta-Apex C203016G Crysta-Apex C306016G Range X-axis Range Y axis 2005 mm 3005 mm 3005 mm 6005 mm Range Z axis 1605 or 2005 mm(²) 1605 or 2005 mm(²) Accuracy (1) E 0,MPE : (6+6L/1000)µm or (7+7L/1000)µm : Z-axis = 2005 mm P FTU,MPE : 6 µm or 7 µm : Z-axis = 2005 mm MPE THP : 6,5 µm (90s) or 7,5 µm (90s) : Z-axis = 2005 mm E 0,MPE : (7+6L/1000)µm or (8+7L/1000)µm : Z-axis = 2005 mm P FTU,MPE : 7 µm or 8 µm : Z-axis = 2005 mm MPE THP : 7,5 µm (90s) or 8,5 µm (90s) : Z-axis = 2005 mm Mass (main unit) 12000 kg 16000 kg (¹) The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010)methods when using the SP25M probe system with a ø4x50 mm stylus. (²) According to order No. The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 607
STRATO-APEX 700/900 Series Series 355 - High accuracy CNC CMM High measurement accuracy and high-speed motion. High-performance scanning. Ultra high precision scales on each axis. Accuracy is specified for the following environmental conditions for the CMM:* 18 C - 22 C Per hour 1.0 K Per 24 hours 2.0 K Vertical Horizontal *When using temperature compensation system Digital step 0,02 µm Accuracy (1) E 0,MPE : (0,9+0,25L/100)µm P FTU,MPE : 0,9 µm MPE THP : 1,8 µm (45s) Work table material Black granite Work table tapped insert M8 x 1.25 mm High accuracy linear encoder Air bearing 519 mm/sec Max. acceleration 0,15G (¹) The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010)methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. STRATO-Apex 9106 Model STRATO-Apex 776 STRATO-Apex 7106 STRATO-Apex 9106 STRATO-Apex 9166 No. 355-502 355-507 355-512 355-517 Range X x Y x Z axis 705 x 705 x 605 mm 705 x 1005 x 605 mm 905 x 1005 x 605 mm 905 x 1605 x 605 mm Work table size 880 x 1420 mm 882 x 1720 mm 1082 x 1720 mm 1080 x 2320 mm Max. height : 770 mm Max.loading : 500 kg Max. height : 770 mm Max. loading : 800 kg Max. height : 770 mm Max.loading : 800 kg Max. height : 770 mm Max. loading : 1200 kg Mass (main unit) 1895 kg 2180 kg 2410 kg 3085 kg FALCIO-APEX 1600 Series Series 355 - High accuracy CNC CMM Accuracy is specified for the following environmental conditions for the CMM:* 18 C - 22 C Per hour 1.0 K Per 24 hours 2.0 K Vertical Horizontal *When using temperature compensation system Accuracy (1) E 0,MPE : (2,8+0,4L/100)µm or (3,3+0,45L/100)µm : Z-axis = 1505 mm P FTU,MPE : 2,8 µm or 3,3 µm : Z- axis = 1505 mm MPE THP : 2,8 µm (90s) or 3,5 µm (90s) : Z-axis = 1505 mm Work table material Black granite Work table tapped M8 x 1.25 mm insert High accuracy linear encoder Air bearing 500 mm/sec No. FALCIO-Apex 162012 FALCIO-Apex 163012 FALCIO-Apex 164012 (1) According to order N FALCIO-Apex 163012 Range X-axis Range Y axis 1605 mm 2005 mm 1605 mm 3005 mm 1605 mm 4005 mm Range Z axis Work table size 1205 or 1505 1850 x 3280 mm (1) mm(¹) 1205 or 1505 1850 x 4280 mm (1) mm(¹) 1205 or 1505 1850 x 5280 mm (1) mm(¹) Max. height : 1350 or 1650 mm Max. loading : 3500 kg Max. height : 1350 or 1650 mm Max. loading : 4000 kg Max. height : 1350 or 1650 mm Max. loading : 4500 kg Mass (main unit) 9500 or 9600 kg 14000 or 14050 kg 25000 or 25050 kg Max. acceleration 0.13G (¹) The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010)methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. The prices listed are suggested retail prices (valid until 31 608 st May 2013). Inch products and combined inch/metric products are generally intended
FALCIO-APEX 2000/3000 Series Accuracy (1) E 0,MPE : (3,5+4L/1000)µm or (4+4,5L/1000)µm : Z-axis = 2005 mm P FTU,MPE : 3,5 µm or 4 µm : Z-axis = 2005 mm MPE THP : 3,8 µm (90s) or 4,2 µm (90s) : Z-axis = 2005 mm Series 355 - High accuracy Large CNC CMM This large gantry style CNC CMM provides a huge measuring range of 2000 x 3000 x 1500 mm to 3000 x 5000 x 2000 mm with high accuracy. High accuracy linear encoder Air bearing 520 mm/sec (¹) The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010) methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. FALCIO-Apex 305015G Accuracy is specified for the following environmental conditions for the CMM:* 18 C - 22 C Per hour 1.0 K Per 24 hours 2.0 K Vertical Horizontal *When using temperature compensation system No. Range X-axis Range Y Range Z axis axis Mass (main unit) FALCIO-Apex 203015G 2005 mm 3005 mm 1505 or 2005 mm (1) 12000 kg FALCIO-Apex 204015G 2005 mm 4005 mm 1505 or 2005 mm (1) 14000 kg FALCIO-Apex 205015G 2005 mm 5005 mm 1505 or 2005 mm (1) 15000 kg FALCIO-Apex 305015G 3005 mm 5005 mm 1505 or 2005 mm (1) 16000 kg (1) According to order N Safety System For this type series, Mitutoyo offers a customized safety system. Depending on the local situation in your facility, Mitutoyo will propose a tailor-made solution meeting the requirements of the machinery directive. Foundation This type series always requires a special foundation. Please contact your local Mitutoyo partner for further details. The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 609
LEGEX Series Series 356 - Ultra-high accuracy CNC CMM The most accurate CNC CMM family with unsurpassed accuracy of 0.35 µm made possible by rigorous analysis of all possible error-producing factors and elimination or minimizing their effects. Ultra-high accuracy crystallized-glass scale with the ultra-low expansion coefficient of 0.01x10-6 /K is used on each axis. The fixed bridge structure and precision air bearings running on highly rigid guideways ensure superior motion stability and ultra-high geometrical accuracy. Many types of optional probe systems are available, including touch-trigger probes, laser scanning probes, and a vision measuring probe. Digital step 0,01 µm Work table material Cast iron Work table tapped insert M8 x 1.25 mm Ultra high accuracy linear encoder (glass scale with virtually zero thermal expansion coefficient) Air bearing Max. acceleration 0,1G 200 mm/sec LEGEX 774 CMM calibration using a virtually zero thermal expansion glass gauge Accuracy is specified for the following environmental conditions for the CMM* 20±2 C Per hour Per 24 hours Vertical Horizontal 0.5 K *When using temperature compensation system Model LEGEX 574 LEGEX 774 LEGEX 776 LEGEX 9106 No. 356-373-5 356-253D 356-257D 356-263D Range X x Y x Z axis 510x710x455mm 710x710x455mm 710x710x605mm 910x1010x605mm Accuracy (1) E 0,MPE (0,35+0,1L/1000)µm (0,35+0,1L/1000)µm (0,35+0,1L/1000)µm (0,35+0,1L/1000)µm Accuracy (1) P FTU,MPE 0,45µm 0,45µm 0,45µm 0,45µm Accuracy (1) MPEthp 1,4µm 1,4µm 1,4µm 1,4µm Work table size 550x750mm 750x750mm 750x750mm 950x1050mm Max. height : 706mm Max. height : 696mm Max. height : 862mm Max height : 856mm Max. loading : 200kg Max. loading : 500kg Max. loading : 500kg Max. loading : 800kg Mass (main unit) 3900kg 5000kg 5100kg 6500kg (1) The machine is equipped with the temperature compensation system. According to ISO 10360-2 (2010) methods when using the MPP-310Q probe system. L= measuring length (mm). Model LEGEX 12128 No. 356-243D Range X x Y x Z axis 1210x1210x810mm Accuracy (1) E 0,MPE (0,6+0,15L/1000)µm Accuracy (1) P FTU,MPE 0,6µm Accuracy (1) MPEthp 1,8µm Work table size 1250x1250mm Max. height : 1056mm Max. loading : 1000kg Mass (main unit) 10500kg The prices listed are suggested retail prices (valid until 31 610 st May 2013). Inch products and combined inch/metric products are generally intended
CARBstrato / CARBapex Series Range X-axis 4000-8000 mm Range Y 1400-1600 mm axis Range Z 2000-2600 mm axis High accuracy linear encoder X-axis : linear guide ; YZ-axis : air bearing Series 360 - Car Body Measuring System A large, horizontal-type arm CNC CMM for measuring car bodies or similar components. Single/ dual-head types are available ; the dual-head type measures by controlling two heads simultaneously, one from each side. MAIN FEATURES CARBstrato : large, high precision, dual-head type. MAIN FEATURES CARBapex : large, single-head type, affordable. 866 mm/sec (CARBstrato) 519 mm/sec (CARBapex) Max. acceleration 0,2G (CARBstrato) 0,1G (CARBapex) Accuracy is specified for the following environmental conditions for the CMM*: 16 C - 26 C per hour per 24 hours 1.0 K 5.0 K Vertical Horizontal *When using temperature compensation system CARBstrato / CARBapex Series brochure on request CARBstrato Safety System For this type series, Mitutoyo offers a customized safety system. Depending on the local situation in your facility, Mitutoyo will propose a tailor-made solution meeting the requirements of the machinery directive. Foundation This type series always requires a special foundation. Please contact your local Mitutoyo partner for further details. Metric No. Range 160-127 0-300 mm No. CARBstrato CARBapex Accuracy(¹) E 0,MPE (18+20L/1000)µm (25+28L/1000)µm (¹) The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010) methods when using the SP25M probe system module SM25-1, with a ø 4x50 mm stylus. The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 611 CARBapex
MACH-V565 / 9106 Series 360 - In-line type CNC CMM The MACH-V maximizes machining performance by performing in-line, high speed coordinate measuring in conjunction with your CNC machine tools. These high-throughput machines can be incorporated right into the manufacturing line and can provide pre/post machining feedback to your machine tool for machining adjustments. Accuracy (1) E 0,MPE : (2,5+0,35L/100)µm / (2,9+0,43L/100)µm / (3,6+0,58L/100)µm (²) P FTU,MPE : 2,5 µm (2,2 µm : using SP25M) High accuracy linear encoder Linear guide 866 mm/sec Max. acceleration 0.86G (¹)The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010) when using the TP7M probe system module SM25-1, with a ø 4x50 mm stylus. (²)Guaranteed accuracy temperature range : 19 C - 21 C / 15 C - 25 C / 5 C - 35 C. MACH-V9106 Model MACH-V565 MACH-V9106 No. 360-206A 360-226A Range X x Y x Z axis 505 x 605 x 505 mm 905 x 1005 x 605 mm Accuracy is specified for the following environmental conditions for the CMM* 5 C - 35 C per hour 2.0 K per 24 hours 10.0 K Vertical Horizontal *When using temperature compensation system Safety System For this type series, Mitutoyo offers a customized safety system. Depending on the local situation in your facility, Mitutoyo will propose a tailor-made solution meeting the requirements of the machinery directive. The prices listed are suggested retail prices (valid until 31 612 st May 2013). Inch products and combined inch/metric products are generally intended
MACH-3A 653 Accuracy (1) E 0,MPE : (2,5+0,35L/100)µm / (2,8+0,42L/100)µm / (3,2+0,5L/100)µm / (3,5+0.,7L/100)µm / (3,9+0,65L/100)µm (²) P FTU,MPE : 2,5 µm Series 360 - In-line type CNC CMM High accuracy linear encoder Linear guide 1212 mm/sec Max. acceleration 1.2G (¹)The machine is equipped with a temperature compensation system, the effect of which is included in the accuracy specification according to ISO 10360-2 (2010) when using the TP7M probe system with a ø4x50 mm stylus. L= measured length (mm). (²)Specified accuracy temperature range : 19 C - 21 C / 15 C - 25 C / 10 C - 30 C / 5 C - 35 C / 35 C - 40 C Accuracy is specified for the following environmental conditions for the CMM 5 C - 40 C per hour per 24 hours 2.0 K 10.0 K Vertical Horizontal Safety System For this type series, Mitutoyo offers a customized safety system. Depending on the local situation in your facility, Mitutoyo will propose a tailor-made solution meeting the requirements of the machinery directive. Model MACH-3A 653 No. 360-412 Range X x Y x Z axis 605 x 505 x 285 mm Foundation This type series always requires a special foundation. Please contact your local Mitutoyo partner for further details. The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 613
CRYSTA-PLUS M443 / 500 / 700 Series Series 196 - Manual-floating type CMM Manual floating type CMMs developed in the quest for high accuracy. The Crysta-Plus M is suited to a wide range of applications from simple dimensional to complex form measurement. FEATURES : Smooth operation due to high-precision air bearings and lightweight moving members. Continuous fine feed over the entire measuring range. A temperature compensation system is available as an option. Digital step 0,5 µm Work table material Black granite Work table tapped M8 x 1.25 mm insert High accuracy linear encoder Air bearing Axis clamp One-touch air clamp (screw clamp : M776, M7106) Fine feed Entire range One-touch air clamp and fine feed for rapid and easy positionning Ergonomically designed guide grip on Z-axis for reliable measurement (only for Crysta-Plus M776 and M7106) Crysta-Plus M574 Crysta-Plus M7106 Model Crysta-Plus M443 Crysta-Plus M544 Crysta-Plus M574 Crysta-Plus M776 Crysta-Plus M7106 No. 196-683 196-591 196-596 196-684D 196-592 196-597 196-342 196-352 Range X x Y x Z axis 400 x 400 x 300 500 x 400 x 400 500 x 700 x 400 700 x 700 x 600 700 x 1000 x 600 mm mm mm mm mm Accuracy (1) ±(3,0+4,0L/ ±(3,0+4,0L/ ±(3,0+4,0L/ ±(4,5+4,5L/ ±(4,5+4,5L/ MPE E : MPE E : MPE E : MPE E : MPE E : 1000)µm MPE P : 4,0 µm 1000)µm MPE P : 4,0 µm 1000)µm MPE P : 4,0 µm 1000)µm MPE P : 5,0 µm 1000)µm MPE P : 5,0 µm Work table size 624 x 805 mm 764 x 875 mm 764 x 1175 mm 900 x 1440 mm 900 x 1740 mm Max. height : Max. height : Max. height : Max. height : Max. height : 480 mm 595 mm 595 mm 800 mm 800 mm Max. loading : Max. loading : Max. loading : Max. loading : Max. loading : 180 kg 180 kg 180 kg 500 kg 800 kg Mass (main unit) 360 kg 450 kg 575 kg 1451 kg 1697 kg 196-684D, 196-592 and 196-597 : models with temperature compensation (1) According to ISO 10360-2 methods when using the TP20 probe system. Accuracy is specified for the following environmental conditions for the CMM 19 C - 15 C - 21 C 30 C* Per hour - 2.0 K Per 24 hours - 5.0 K Vertical Horizontal 0.5 K/m 0.5 K/m *The values shown in bold in the table above apply when using the temperature compensation system (optional): Crysta-Plus M brochure on request DATA PROCESSING OPTIONS: MCOSMOS QM-DATA The prices listed are suggested retail prices (valid until 31 614 st May 2013). Inch products and combined inch/metric products are generally intended
Brake PC commmunication Electromagnetic USB / WIFI SpinArm-Apex Series 195 - Multi-axis Portable Coordinate Measuring System Compact and lightweight for easy transporting Brake function Counterbalanced for easy / extended operation Wireless communication including Laser Scanner for improved mobility Thermal compensation Automatic probe recognition SurfaceMeasure MCOSMOS MSURF-M SpinArm This product is not for use in the United States of America or for export into the United States of America. No. Model Ø Measuring range [mm] Number of axis Repeatability Point-to-point distance accuracy 1 02AMA164 SpinArm-Apex 367S 3600 7 ± 0,110 mm ± 0,165 mm 02AMA165 SpinArm-Apex 307S 3000 7 ± 0,090 mm ± 0,135 mm 02AMA166 SpinArm-Apex 247S 2400 7 ± 0,055 mm ± 0,080 mm 02AMA172 SpinArm-Apex 366S 3600 6 ± 0,100 mm ± 0,135 mm 02AMA173 SpinArm-Apex 360S 3000 6 ± 0,080 mm ± 0,100 mm 02AMA174 SpinArm-Apex 246S 2400 6 ± 0,050 mm ± 0,065 mm 02AMA175 SpinArm-Apex 186S 1800 6 ± 0,040 mm ± 0,055 mm 1 Inspection method is conformed to Mitutoyo standard. The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 615
CMM Software MCOSMOS The high-end MiCAT software suite developed by Mitutoyo puts the capabilities of a variety of powerful software packages at your fingertips. CMM Software, styli and jigs brochure on request Sample screen display from Part Manager Sample screen display from GEOPAK/SCANPAK Software package MCOSMOS 1 Manual MCOSMOS 1 CNC MCOSMOS 2 CNC MCOSMOS 3 CNC Part Manager Software control centre and part program manager. GEOPAK Geometry module - online/ offline part program creation. CAT1000P¹ The ultimate in CAD inspection software. Features online/offline programming. CAT1000S¹ Advanced 3D freeform surface evaluation module. SCANPAK Provides measurement and evaluation of 2D profiles. MeasurLink Real-time collection, analysis and display of SPC data. MAFIS Analysis of airfoil surface profiles, such as turbine blades, from scanned data. ROUNDPAK CMM Extended evaluation functions for circles, cylinders and planes. GEARPAK For the measurement of all kinds of involute gears and subsequent comparison with factory or international standards. Correct Plus Fully automated machine tool correction using optimized data from multiple part measurements. Q-PAK Executes a list of existing part programs at predefined positions on the measuring table allowing unattended measurement. Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional ¹Standard CAD import interfaces : ACIS (*.sat), STEP Optional CAD import interfaces : CATIA V4, CATIA V5, Pro/E, IGES, VDA-FS, Parasolid, Unigraphics, SolidWorks, Inventor and hsf The prices listed are suggested retail prices (valid until 31 616 st May 2013). Inch products and combined inch/metric products are generally intended
CMM PROBES Optical (non-contact) probe systems SurfaceMeasure 606 Line laser probe Software : MSURF QVP (Quick Vision Probe) For video Measurement Software : VISIONPAK CF20 Centering microscope system Scanning probe systems MPP-310Q Ultra-high accuracy and low measuring force type SP80 High accuracy type available with 500 mm extension MPP-10 For effective threaddepth measurement SP25M Compact and high accuracy type Touch-trigger probe systems TP7M High accuracy type TP200 Compact and high accuracy (stylus type) SCR200 Rack Micro Touch Probe UMAP-CMM TP20 Compact type MCR20 Rack MH20i / MH20 Manual Probes Probe heads CMM Probes brochure on demand PH10M Motor drive index type MIH Manual index type PH1 Simple manual type TP8 Manual Indexable Probe The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended 617
CMM Software MSURF-G Off-line teaching software for use with SMP606 laser scan probe. MSURF-G allows : Semi-automatic function for creating measurement paths with optimum probe orientation Detection of collision between the probe and the workpiece model Generation of simulated data for the point cloud expected to be obtained through scanning Displaying measurement movements (scanner movements) in animation Screen sample from MSURF-G Screen sample from MSURF-G MSURF-S and M-SURF-I User-friendly point cloud data processing software MSURF-S and MSURF-I allow : Scanning : MSURF-S Scanning paths can be created by simply defining three items : the scanning starting point, the scanning length, and the scanning width Scanning paths can be stored as measurement macros Point cloud data obtained from scanning can be exported in text or STL format MSURF-S can be started from MCOSMOS Inspection : MSURF-I Importing CAD data Feature-by-feature comparison Comparison of cross-sectional shapes Screen sample from MSURF-S/I Screen sample from MSURF-S Screen sample from MSURF-S Screen sample from MSURF-I The prices listed are suggested retail prices (valid until 31 618 st May 2013). Inch products and combined inch/metric products are generally intended