Metric dovetail slides selection of sizes for tooling, work feeding and positioning operations
section igh profile basic igh profile slide assemblies are useful for a broad range of applications where the nature of the work to be done requires a more rugged construction than the L section slide assembly. reater stability and capacity are accomplished by increasing the thickness of the saddle and base. The increased height of the saddle also allows greater flexibility for machining mounting requirements. asic slide assemblies consist of a saddle, base, gib and gib adjusting screws. They are designed for installations where the means of movement, mounting, and all other details are provided by the customer. F 60 typ. 5 typ. D Model number Dimensions (millimeters) pprox. Milled D F (kgs) 100-200-50-M 100 200 50 45 29 12 77 29 5.9 100-300-100-M 100 300 100 45 29 12 77 29 8.6 150-300-100-M 150 300 100 57 38 19 114 35 20 150-400-150-M 150 400 150 57 38 19 114 35 26.3 200-450-150-M 200 450 150 76 51 28 148 41 43.1 200-600-200-M 200 600 200 76 51 28 148 41 55.3 ib lock handle available at additional cost (two on 400 mm, 450 mm and 600 mm long saddles). section igh profile lead screw Style will be furnished unless otherwise specified. igh profile lead screw slide assemblies are useful for many heavy service applications where accurate manual positioning or feeding is needed. These slide assemblies feature a precision lead screw, needle thrust bearings, a graduated micrometer dial, and a selection of drive ends. Style has a balanced crank handle for ease and speed in advancing or retracting the saddle. Style is ideal where space is limited and a knurled knob is sufficient for adjustment. K 2 Style Style J dia. F X lead screw thread D Model number Dimensions (millimeters) pprox. (kgs) Milled D F J K X 100-200-50-M-L 100 200 50 45 19 325 245 45 13 10 M12-1 Vee 6.8 100-300-100-M-L 100 300 100 45 19 425 345 45 13 10 M12-1 Vee 9.5 150-300-100-M-L 150 300 100 57 21 435 354 57 16 16 M16-2 Vee 21.8 150-400-150-M-L 150 400 150 57 21 535 456 57 16 16 M16-2 Vee 28.1 200-450-150-M-L 200 450 150 76 26 615 530 67 20 17 M20-2.5 Vee 45.4 200-600-200-M-L 200 600 200 76 26 765 683 67 20 17 M20-2.5 Vee 58.1 ib lock handle available at additional cost (two on 400 mm, 450 mm and 600 mm long saddles).
L section Low profile basic ilman US low profile slide assemblies are useful for a broad range of applications where the load induced into the assembly is moderate and a compact design is essential. asic slide assemblies consist of a saddle, base, gib and gib adjusting screws. They are designed for installations where the means of movement, mounting, and all other details are provided by the customer. F 5 D 60 typ. Model number Dimensions (millimeters) pprox. (kgs) Milled D F L50-75-20-M 50 75 20 22 16 8 35 16 0.6 L50-100-25-M 50 100 25 22 16 8 35 16 0.8 L50-150-50-M 50 150 50 22 16 8 35 16 1.0 L75-100-25-M 75 100 25 25 17 10 56 18 1.2 L75-125-25-M 75 125 25 25 17 10 56 18 1.6 L75-150-50-M 75 150 50 25 17 10 56 18 1.7 L100-150-25-M 100 150 25 38 25 12 77 26 3.9 L100-200-50-M 100 200 50 38 25 12 77 26 4.8 L100-300-75-M 100 300 75 38 25 12 77 26 7.5 L150-200-50-M 150 200 50 45 28 19 114 29 8.6 L150-300-100-M 150 300 100 45 28 19 114 29 12.2 L150-400-100-M 150 400 100 45 28 19 114 29 17.2 ib lock handle available at additional cost (two on 400mm long saddle). L section Low profile lead screw Style will be furnished unless otherwise specified. Low profile lead screw assemblies are useful for many applications where accurate manual positioning or feeding is needed. These slide assemblies feature a precision lead screw, a graduated micrometer dial, and a selection of drive ends. Style has a balanced crank handle for ease and speed in advancing or retracting the saddle. Style is ideal where space is limited and a knurled knob is sufficient for adjustment. K 2 Style Style J dia. F X lead screw thread D Model number Dimensions (millimeters) pprox. Milled D F J K X (kgs) L50-75-20-M-L 50 75 20 22 13 150 100 35 8 9 M8-1 Vee 0.8 L50-100-25-M-L 50 100 25 22 13 175 125 35 8 9 M8-1 Vee 1.0 L50-150-50-M-L 50 150 50 22 13 225 175 35 8 9 M8-1 Vee 1.2 L75-100-25-M-L 75 100 25 25 13 175 125 35 8 10 M8-1 Vee 1.5 L75-125-25-M-L 75 125 25 25 13 200 150 35 8 10 M8-1 Vee 1.8 L75-150-50-M-L 75 150 50 25 13 225 175 35 8 10 M8-1 Vee 1.9 L100-150-25-M-L 100 150 25 38 19 275 195 45 13 16 M12-1 Vee 4.3 L100-200-50-M-L 100 200 50 38 19 325 245 45 13 16 M12-1 Vee 5.2 L100-300-75-M-L 100 300 75 38 19 425 345 45 13 16 M12-1 Vee 7.6 L150-200-50-M-L 150 200 50 45 21 335 252 57 16 17 M16-1 Vee 10.0 L150-300-100-M-L 150 300 100 45 21 435 354 57 16 17 M16-1 Vee 13.2 L150-400-100-M-L 150 400 100 45 21 535 456 57 16 17 M16-1 Vee 18.1 ib lock handle available at additional cost (two on 400mm long saddle).
L section Low profile lead screw compound Low profile lead screw compound slide assemblies are useful for many applications where two-axis, accurate manual positioning or feeding is needed. These compound slide assemblies are made from standard lead screw assemblies which are accurately bolted together with the travel 90 to each other. ll the features pertaining to the standard lead screw assemblies apply to the compounds. For ease of installation, mounting holes are provided in the base of the X axis slide. On special request, where practical, other slide combinations can be provided besides those shown. Style will be furnished unless otherwise specified. Style.025 Z axis K Soc. D..S. (4) (2) on L50 D Style F ±.25 J DD X axis L M Far side L50 Model number Dimensions (millimeters) Z axis / X axis D F J K L M DD L50-75-20-M-L / L50-150-50-M-L 50 75 20 150 50 44 2.5 7 70 M4 17 12 50 150 50 225 L50-100-25-M-L / L50-100-25-M-L 50 100 25 175 25 44 12.5 7 45 M4 17 12 50 100 25 175 L50-150-50-M-L / L75-150-50-M-L 50 150 50 225 50 47 12.5 10 80 M5 24 27 75 150 50 225 L75-100-25-M-L / L75-150-50-M-L 75 100 25 175 37.5 50 0 10 80 M5 24 27 75 150 50 225 L75-125-25-M-L / L50-125-25-M-L 75 125 25 200 25 50 12.5 10 80 M5 24 27 75 125 25 200 L75-150-50-M-L / L100-300-75-M-L 75 150 50 225 112.5 53 0 25 175 M6 33 34 100 300 75 425 L100-150-25-M-L / L100-300-75-M-L 100 150 25 275 100 76 12.5 25 175 M6 33 34 100 300 75 425 L100-200-50-M-L / L100-200-50-M-L 100 200 50 325 50 76 25 15 120 M6 33 34 100 200 50 325 L100-300-75-M-L / L150-300-100-M-L 100 300 75 425 100 83 37.5 20 160 M8 40 70 150 300 100 435 L150-200-50-M-L / L150-300-100-M-L 150 200 50 335 75 90 0 20 160 M8 40 70 150 300 100 435 L150-300-100-M-L / L150-300-100-M-L 150 300 100 435 75 90 25 20 160 M8 40 70 150 300 100 435 L150-400-100-M-L / 200-450-150-M-L 150 400 100 535 150 120 50 40 220 M10 52 96 200 450 150 615 ib lock handle available at additional cost (two on 400 mm and 450 mm long saddles).
L section Low profile lead screw with angle bracket low profile lead screw slide assembly bolted to a 90 angle bracket has many uses where accurate manual positioning or feeding is needed. These units can be floor mounted to give vertical travel or wall mounted to provide horizontal travel. It is easy to make a three-axis slide assembly by mounting one of these units to one of the compound slide assemblies. ll the features pertaining to the standard lead screw assemblies apply to these. For ease of installation, mounting holes are provided in the angle bracket. Style Style F K Soc. D..S. (4) J D.025 M L Style will be furnished unless otherwise specified. Model number Dimensions (millimeters) pprox. (kgs) Milled D F J K L M L50-75-20-M-L 50 75 20 50 72 150 75 16 29 M4 5 40 1.4 L50-100-25-M-L 50 100 25 50 72 175 100 16 29 M4 5 40 1.6 L50-150-50-M-L 50 150 50 50 72 225 150 16 29 M4 5 40 2.2 L75-100-25-M-L 75 100 25 75 100 175 100 19 50 M5 7.5 60 2.7 L75-125-25-M-L 75 125 25 75 100 200 125 19 50 M5 7.5 60 3.5 L75-150-50-M-L 75 150 50 75 100 225 150 19 50 M5 7.5 60 3.9 L100-150-25-M-L 100 150 25 100 138 275 150 25 67 M6 7.5 85 7.8 L100-200-50-M-L 100 200 50 100 138 325 200 25 67 M6 7.5 85 10 L100-300-75-M-L 100 300 75 100 138 425 300 25 67 M6 7.5 85 14.5 L150-200-50-M-L 150 200 50 150 195 335 200 32 105 M8 10 130 18.6 L150-300-100-M-L 150 300 100 150 195 435 300 32 105 M8 10 130 25.9 L150-400-100-M-L 150 400 100 150 195 535 400 32 105 M8 10 130 33.6 ib lock handle available at additional cost (two on 400 mm long saddle).
ilman US, LL 1230 heyenne venue P.O. ox 5 rafton, WI 53204 Telephone: 800-445-6267 or 262-204-2227 Fax: 262-377-9438 e-mail: sales@ilmanus.com www.gilmanusa.com The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. very care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of use of the information contained herein. 2011 ilman US, LL Version 12/2011 Printed in U.S..