Configura Porter Information & Assessment Form To complete an online assessment, please visit the Configura website at www.configura.uk.com Porter
APPROPRIATE FOR: Ambulant, semi-ambulant & non-ambulant users Users with OedemaS legs and/or fluid build-up Users with a Kyphosis and are trademarks belonging to Accora Ltd unless otherwise stated. As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. Accora Ltd 2016. Users with Neurological conditions Users with stiffness or fixtures at hips Users who need a riser function to transfer Users who need to elevate feet above hips Users with a limited extension at the knees Users who need to be transported from room to room NOT APPROPRIATE FOR: Users at some risk of pressure damage Accommodation & encouragement of good posture 1 Demanding postural requirements Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 2 Bariatric users 2
Prescriber details Name:... Department:... Address:......... Telephone:... Email:... user details Name:... Address:......... Telephone:... Email:... User weight:... Pressure care:... Posture:... Mobility:... Diagnosis:... DID YOU KNOW? You can enter and store your assessment online at www.configura.uk.com? Click on register. Prognosis:... Transfer method:... Current seating:... Problems with current seating:... Notes:............ Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 3
Standard chair specification Configura Porter is a revolutionary new product which allows a level of functionality that has previously not been possible with Specialist seating: Independent legrest and tilt for users with reduced extension at the knees. Folding footplate for users at risk of foot drop. Riser function for users carrying out an assisted or standaid transfer. Portable for users who need to be transported room to room. Footplate as standard Riser function Independent leg-rest Fully portable Independent Tilt-in-space function Adjustable width and depth Medium-high pressure relief as standard, and VP backrest Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 4
SIZE Key thoughts: n 3 measurements are required for selecting a chair; seat depth, seat height and seat width see below drawings for clarity. n When selecting a chair size, prioritise the chair measurements in the following order: seat depth, seat height then seat width. This will ensure the selected size is the right overall proportion for the user. n If you cannot find the size you need, check out the other chairs in our range or contact us as we may be able to supply a special size. note The green highlighted options denote standard or default chair specification. Seat depth Seat height Seat width CHAIRS Size Part number Select Seat depth Select Seat height Select Seat width Select Porter Lo (20st weight capacity) CFP182016DT 18 20 (std) 22 16 16 18 (std) 20 Porter Std (20st weight capacity) CFP182020DT 18 20 (std) 22 18 16 18 (std) 20 = includes 2 Depth Adjustment Kit = includes 2 x 2 Depth Adjustment Kits Notes: n Be aware of the size adjustments possible after delivery. n In some circumstances it may be appropriate to compromise 1-2 on size. n The overall size of chair cannot be changed after delivery. For example you cannot change a Small chair into a Medium. Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 5
PRESSURE Key thoughts: n Selection of pressure cushions is a clinical decision which involves many variables including a risk assessment tool. Professional input from a Tissue Viability Nurse or District Nurse may be required at this stage. n Vapour permeable fabric as standard on seat base, legrest and backrest. PRESSURE CARE OPTIONS Description Long description Part number Select Visco (std) Castellated Prevention: Heat sensitive memory foam moulds to the user providing maximum support and pressure reduction. Suitable for users who are at risk of pressure damage. Prevention: Castellated, pressure reducing cushion for users who cannot tolerate Visco foam. Similar in performance to the Visco cushion. CUVIS-0-CFP1-120 (LO) CUVIS-0-CFP1-220 (MED) CUFOM-0-CFP1-120 (LO) CUFOM-0-CFP1-220 (MED) Cushionair Visco and Vapour Permeable fabric on armrests Management: Powered alternating air cushion which coupled with the memory foam and vapour permeable fabric of the overlay provides excellent comfort, stability and pressure relief. 50 stone weight capacity. Visco and Vapour Permeable fabric on armrests for increased comfort and pressure reduction. KITCA-0-CFP1-120 (LO) KITCA-0-CFP1-220 (MED) Please ask for further details Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 6
POSTURE Key thoughts: n Tilt-in-space can significantly improve midline sitting so increased lateral support may not be necessary if the user tends to slump mildly to one side. n The Multi-adjustable Pillow Backrest is more adjustable than the Lateral Support Backrest and Adjustable Lateral Support System because filling can be removed to accommodate different postural requirements. POSTURE MANAGEMENT OPTIONS Description Long description Part number Select Multi-adjustable Pillow Backrest (std) Duratek fabric as per chair Accommodation: each pillow is height adjustable and filling can be customised to the user. Offering mild to moderate postural support, the Multi-adjustable Pillow Backrest is highly effective for users with a kyphosis or a scoliosis. Excellent for postural accommodation and comfort. Non-pressure reducing. BRMAPKT-0-CFP1-020 BRMAPKT-0-CFP1-040 2 x Lateral Supports Accommodation: Lateral Supports to fit underneath the backrest pillows to provide mild lateral support combined with the comfort and adjustability of the Multi-adjustable Pillow Backrest.(As used with Adjustable Lateral Support System below). MALLS-0-CF1-00 Lateral Support Backrest Encouragement: The Lateral Support Backrest encourages a midline sitting position and is suitable for users who require increased lateral support. Users with neurological conditions (including MS) will benefit from the firm but comfortable support. Ideal for flexible posture. 16 seat width BRLSB-0-CC1-020 18 seat width BRLSB-0-CF1-120 20 seat width BRLSB-0-CF1-220 Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 7
Description Long description Part number Select Adjustable Lateral Support System Pillow Headrest (std) Management/Correction: Contoured foam backrest with adjustable Velcro Lateral Supports. Excellent for providing more aggressive lateral support and mild positioning/ correction. Supplied with breathable, pressure reducing fabric. Lateral Supports can also be fitted at shoulder level to minimise the tendency to lean to one side. (Not available in VP fabric). As per the top pillow on the Multi-adjustable Pillow Backrest. 16 seat width BRMAL-0-CC1-000 18 seat width BRMAL-0-CF1-100 20 seat width BRMAL-0-CF1-200 BRMAT-0-CF1-220 Profiled Headrest Suitable for users with reduced head control. Fits over the shoulders. HRPF-0-CF1-220 Right hand control handset (std) Handset fitted to right hand side of chair, for righthanded users. HSRH-0-CM1-000 Left hand control handset Handset fitted to left hand side of chair, for left-handed users. HSLH-0-CM1-000 Carer control handset Fitted to backrest out of user reach. HSCC-0-CM1-000 Battery Back Up Riser Control System Gives the ability to change the position of the chair when the service user is being moved. Also provides back up in case of a power cut. Allows the therapist or carer to disable the rise function, via a simple switch at the back of the chair. BBU-0-CFB1-000 RSDIS-0-CFP1-000 Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 8
TECHNICAL SPECIFICATION n To provide comfortable seating n To raise a user from a sitting to a standing position n To lower a user from a standing to a sitting position n To tilt in space a user n To Porter between rooms OVERALL DIMENSIONS Lo Medium Seat height 508 mm (20 ) 457 mm (18 ) Seat width 406 mm 508 mm (16 / 18 / 20 ) 406 mm 508 mm (16 / 18 / 20 ) Seat depth position 508 mm (20 ) 508 mm (20 ) Armrest height 190 mm (7.5 ) 190 mm (7.5 ) Overall Width 686 mm (27 ) 686 mm (27 ) Overall Height Upright 1193 mm (47 ) 1143 mm (45 ) Overall Length Upright 1041 mm (41 ) 1041 mm (41 ) Rise height to front of chair 520 mm (20.5 ) 483 mm (19 ) Total Length Fully Reclined (J) 1780 mm (74 ) 1780 mm (74 ) Chair to wall / furniture (K) 495 mm (19.5 ) 495 mm (19.5 ) cleaning instructions for the fabric Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. The new generation of Microfibre cleaning cloths without soap are extremely effective for general care and maintenance. You can also wipe clean regularly with a damp cloth to remove dust particles and light soiling. It is recommended to vacuum the upholstery once a week. Most stains can be removed by wiping clean. Remove spillages promptly (within 15 minutes) with cold water. For extreme soiling control use a 5% Sodium Hypochlorite (Bleach) solution. Do not machine wash or dry clean. Do not apply other chemicals such as polish, solvents or stain remover. Accora: 01223 206100 info@accora.uk.com www.configura.uk.com 9
Accora Ltd Charter House Barrington Road Orwell Cambridge SG8 5QP T: 01223 206100 F: 01223 206120 info@accora.uk.com www.accora.uk.com @Accora_Ltd CONPOR B 001 BRO-CFP-002UK REV 1