Field Lite Ozone Generator Instruction Manual CAUTION: Read manual carefully for proper procedures and operation. V0788
Thank you for your purchase! The Scent Crusher Field Lite is compact and light weight with great features in a small design. We are confident your Scent Crusher Field Lite will give you great scent control in tree stands, or ground blinds. Customer Service 877 575 373 scentcrusher.com WARNING AND SAFETY INSTRUCTIONS USE ONLY FOR INTENDED PURPOSES. READ AND UNDERSTAND ALL SAFETY WARNINGS BEFORE USING THE OZONE MACHINE. USE IN WELL VENTILATED AREA. KEEP AWAY FROM CHILDREN AND PETS DURING USE. KEEP OZONE MACHINE DRY. AVOID USE IN AN ENVIRONMENT WITH STRONG STATIC ELECTRICITY OR MAGNETIC FIELD. AVOID USE IN EXTREMELY HIGH TEMPERATURE OR HIGH HUMIDITY. HIGH TEMPERATURE AND/OR HUMIDITY WILL GREATLY REDUCE THE EFFECTIVENESS OF THE UNIT. DO NOT DISMANTLE OR TAMPER WITH THE EQUIPMENT. DO NOT BLOCK THE AIR OUTLET AS IT WILL AFFECT THE AIR VENTILATION. 2
HOW OZONE WORKS Ozone, or O3, is a tri-atomic form of oxygen and has been used as a powerful organic cleaner for years. Ozone attacks and kills bacteria that cause odor and then converts safely back into oxygen, leaving you and your gear scent-free. BACTERIA BUILDS UP. Anywhere there s sweat, there s bacteria and unwanted odor. OZONE ATTACKS. Ozone attacks bacteria on a molecular level and eliminates it. ODOR DISAPPEARS. You stay scent-free while in the field. In some people, minor levels of ozone exposure may cause irritation to eyes or the respiratory system and may cause mild headache. If you are using Scent Crusher Field Lite in a confined space and you experience any of these symptoms, turn the unit off. If symptoms persist, move to a wellventilated area. Seek medical attention as needed if conditions persist. SCENT CRUSHER FIELD LITE SPECIFICATIONS Model: Input Vol: USB Output: Maximum Ozone Output: Battery Voltage: Scent Crusher Field Lite AC 0v / 60Hz DC 2V 5V 200 mg/h 3.7V 3
CONTENTS WALL OUTLET ADAPTER SCENT CRUSHER FIELD LITE CAR OUTLET ADAPTER MOUNTING KIT (C) PRIMARY ARM (F) EXTENSION ARM (G) LONG T-BOLT (D) TREE SCREW (A) BALL MOUNT & (B) BALL MOUNT CONNECTOR (H) GROUND BLIND CLAMP (E) TREE STRAP W/ CONNECTOR QUANTITY ITEM Scent Crusher Field Lite Wall outlet adapter Car outlet adapter (DC 2v-24v) Mounting Kit Case NOTE: Additional tree screws and tree arms sold separately. 4
ATTACHING THE UNIT TO THE MOUNTING HARDWARE The Scent Crusher Field Lite can be attached to the Tree Screw (D), Tree Strap (E) or Ground Blind Clamp (H). Refer to CONTENTS on page 4 to identify the parts in the mounting kit. ) Screw the Ball Mount (A) into the bottom of the Field Unit. Tighten the Ball Mount Connector (B) to the Ball Mount (A) using the T-Bolt on the Ball Mount Connector (B); see illustration #. B Illustration # A 2) If using in a tree stand, attach the Primary Arm (C) to the Ball Mount Connector (B); see illustration #2. Once connected, tighten the Jam Nut on the Primary Arm (C) to the Ball Mount Connector (B). Now you are ready to attach the Primary Arm (C) to the Tree Screw (D) or Tree Strap (E). Using the Long T-Bolt (G), attach the Primary Arm (C) to the Tree Screw (D); see illustration #3, or Tree Strap (E); see illustration #4. If necessary, use the Extension Arm (F) to add additional distance to the Primary Arm (C) by inserting the Primary Arm (C) into the Extension Arm (F). Use the T-Bolt on the Extension Arm (F) to tighten the Extension Arm (F) to the Primary Arm (C); see illustration #5. C B Illustration #2 G C D Illustration #3 G C E Illustration #4 F C 3) If using in a ground blind, attach the Ground Blind Clamp (H) to the Ball Mount Connector (B). Once connected, tighten the Jam Nut on the Ground Blind Clamp (H) to the Ball Mount Connector (B); see illustration #6. Connect the Ground Blind Clamp (H) to desired ground blind pole. H Illustration #5 B Illustration #6 NOTE: Secure the Tree Screw (D) or Tree Strap (E) to the tree before attaching the unit. For more detailed information visit scentcrusher.com 5
POWER ON/OFF BUTTON BATTERY LEVEL TIME REMAINING MOUNTING ATTACHMENT CONNECTION POWER CORD INPUT USB CHARGING PORT BACK FRONT USING THE SCENT CRUSHER FIELD LITE ) Charge the unit with the supplied AC 0v or DC2v power cord. 2) Mount the unit in your desired Tree Stand or Ground Blind. 3) Press and hold the ON/OFF button for two seconds to turn it ON. 4) Using the ON/OFF button, press to select the desired time to run the unit (2 hours, ½ hours, hour, or 30 minutes.) NOTE: If no time is selected after 0 seconds the unit automatically shuts off. 6
USB USAGE The Scent Crusher Field Lite USB charging port recommended usage: ) The charging port is an output only charging unit (no inbound charge). 2) Use of USB charging port can decrease the available battery charge/ usage cycle availability. 3) USB charging port can be used only when the unit is off. CHARGING THE SCENT CRUSHER FIELD LITE Insert power cord into the charging port on the side of the unit. The charging indicators are as follows: No Display One Bar Flashing Two Bars Flashing Three Bars Flashing Three Bars Solid 0% Charged 25% - 50% Charged 50% - 75% Charged 75% - 00% Charged 00% Charged TREE STAND USE ) Attach the provided tree screw or tree strap above your head, facing slightly downward. See Attaching the Unit for instructions on connecting the unit to the tree screw or strap. 2) Determine the wind direction and correctly position the unit facing the downwind direction. GROUND BLIND USE ) Attach the provided ground blind mount to the blind s frame. See Attaching the Unit for instructions on connecting the unit to the ground blind clamp. 2) Make sure there is proper ventilation in the ground blind and do not mount the unit facing you or another occupant. 7
2 YEAR LIMITED WARRANTY Warranty is void if machine is mistreated or disassembled Customer Service Line: -877-575-373 scentcrusher.com LIMITED WARRANTY MoJack warrants the product for two years against failure due to defect in material or workmanship when product is used properly. MoJack will replace any defective part at no cost. This warranty does not cover any product that has been altered or adjusted, or any product that has been misused or abused. THIS IS THE CUSTOMER S SOLE AND EXCLUSIVE REMEDY. MOJACK DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MOJACK SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF THE IMPLIED WARRANTIES OR THE REMEDIES FOR BREACH OF THE IMPLIED WARRANTIES, SO THESE EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. What does this warranty cover? This warranty covers against a failure due to a defect in material or workmanship within two years of original retail purchase. What does this warranty NOT cover? This warranty does not cover any product which has been altered or adjusted in any way from its original model. It will not cover any product which has been damaged due to misuse, abuse, accident or negligence. This warranty does not cover incidental or consequential damages. This warranty does not apply to product purchased used or from an unauthorized seller. What will be done to correct problems? We will replace any defective part (within the coverage period) at no charge. How do I contact someone about a warranty issue? You can contact our toll-free number -877-575-373 or use our website at scentcrusher.com. In order to be eligible for this warranty you must keep your receipt as proof of date of sale. What is the return policy? Please refer to the Return Policy and Procedures of your place of purchase for returns and refunds. 3535 N. Rock Road Wichita, KS 67226 USA -877-575-373 scentcrusher.com