SPG-400 Solar-powered generators
Features & Benefits: - The GS-SPG series features four 100 Watt solar panels installed on a single support with adjustable tilt angle. - The 480 Amp hour battery assembly, consisting of four 120 amp hour batteries, is contained within two vented galvanized steel battery boxes and includes a wiring harness and control electronics. - The systems are built for easy installation with quick connects terminals. - The system provided includes an 8-foot tall galvanized steel pole. - Every system is available to produce DC or AC power depending on the needs of the device. - Meets AASHTO 120 mph wind force ratings. - Powder coating and custom design available. - 5 year maintenance free system. - Powered any solar light fixture (AC powered) with this system. Panel Assembly A 400 Watt single array consists of four 100 Watt modules which are integrally mounted upon and power riveted. The solar panels have a 10 year warranty for 10% power loss and 25 year warranty for 20% power loss. Battery pack A double vented galvanized steel box containing four 120 amp hour sealed GEL batteries, totaling 480 amp hours. The system is warranted for 5 years. Battery assembly is complete with all stainless steel mounting hardware. Pole and mounting hardware All metallic parts are made of Hot-dipped galvanized steel. The 8 pole is designed to be buried 4 below ground, using the direct burial method. The door on the pole, is used to connect the assembly system to the light fixtures. Wires can be easily buried underground for security against theft. Using AC output option, the distance between the solar generator and the light fixture array, can go up to 100.
General specifications: SPG-400 Solar panel array 4x100W, monocrystalline silicon solar cells, conversion efficiency: 15% Aluminum frame with a unique design to withstand strong winds IP65 Junction Box with 900mm cable 47.5ʺ x 27ʺ Battery pack 4x120Ah at 20hr-rate to 1.75V per cell at 25 C/77 F 78.2 lb. 13.77 (L) 6.57 (W) 7 (H) Terminal F5/F12 Inverter 700W 110V AC (+- 5%) * 20.6~31.6V DC 92% 12 x8 x3 6lbs Controller 12/24V Auto-recognition 250 W@12 V, 500 W@24 V Lead acid (GEL, AGM, flooded), adjustable 5 x 6 x 2 IP68 (1.5 m, 72 h) Pole 8 tall galvanized steel pole 5.11 bottom pole diameter 4.33 top pole diameter Battery box mounted at 16 above ground Direct burial type with 4 below ground level Pole opening at 11 below ground level for output of the wires to the light fixtures Galvanized finish
Solar Panel (100W) Mono Crystalline solar cells Aluminum frame with a unique design to withstand strong winds Highly resistant tempered glass Multilayer EVA encapsulation with triple layer back sheet 25 year power output warranty: 5 years/95%, 12 years/90%, 25 years/80%. Rating Power 100W Production Tolerance ± 3% Maximum Power Voltage Maximum Power Current 17.56V 5. 72A Open Circuit Voltage 21.7V Short Circuit Current 6.23A The picture is for reference only! Frame Size Weight Anodized aluminum, 4mm thickness 1208mm x 682mm / 47.5ʺ x 27ʺ 13Kg / 29.5lb Test Temperature 25 C / 77 F Type of Output IP65 Junction Box with 900mm cable www.streetlamp-solar.com
12V 120Ah GEL deep cycle battery with a 12 years floating design life is especially designed for frequent cyclic discharge under extreme temperature. Cells Per Unit 6 Voltage Per Unit Capacity 12V 120Ah at 20hr-rate to 1.75V per cell at 25 C/ 77 F Weight Max. Discharge Current Internal Resistance Operating Temperature Range 35.5 kg/ 78.2 lb. 1200 A (5 sec) Approx. 5.5 mω Discharge: -40 C ~60 C/ -40 F ~140 F Charge: -20 C~50 C/ -4 F~122 F Storage: -40 C~60 C/ -40 F~140 F Normal Operating Temperature Range 25 C±5 C/ 77 F±41 F Float charging Voltage 13.6 to 13.8 VDC/ unit average at 25 C/ 77 F Recommended Max Charging Current Limit 36A Equalization and Cycle Service 14.6 to 14.8 VDC/unit Average at 25 C/ 77 F Self Discharge Valve Regulated Lead Acid can be stored for more than 6 months at 25 C/ 77 F. Self-discharge ratio less than 3% per month at 25 C/ 77 F. Please charge batteries before using. Terminal Size Terminal F5/F12 350(L) 167(W) 180(H) (mm) 13.77(L) 6.57(W) 7(H) (in) www.streetlamp-solar.com
www.streetlamp-solar.com
GS-LED-MPPT-20 Features: Corrosion-proof epoxy-encapsulated PCB (IP68) Four-stage battery charging (main, float, boost, equalization) Temperature compensated Automatic system voltage recognition (12V/24V) Customized by Greenshine to fit specific needs of clients Easy to install Specifications System voltage Max. charge current/load current Max. PV input power Float charge Main charge Boost charge Equalization Deep discharge protection: Cut-off voltage Reconnect level Overvoltage protection Under-voltage protection 12/24V Auto-recognition 20A 250 W@12 V, 500 W@24 V 13.8/27.6 V (25 C) 14.4/28.8 V (25 C), 30 min. (daily) 14.4/28.8 V (25 C), 2 h Activation: battery voltage < 12.3/24.6 V 14.8/29.6 V (25 C), 2 h Activation: battery voltage < 12.1/24.2 V (at least every 30 days) 11 12 V / 22 24 V 12.8/25.6 V 15.5/31.0 V 10.5/21.0 V Max. PV voltage Min. PV voltage Temperature compensation (Charge voltage) 4 mv/cell * K Ambient temperature 40 to +60 C Battery type Lead acid (GEL, AGM, flooded), adjustable Dimensions (W x H x D) 5 x 6 x 2 Type of protection IP68 (1.5 m, 72 h) www.streetlights-solar.com
GS-LED-IN70024110 Features: Pure Sine-Wave output (THD<3%) Output Frequency: 50/60Hz, switch selectable Input and Output protected against over and under voltage Load or temperature controlled cooling fan Battery low Voltage protection Short circuit protection High Efficiency Status indicator for operation verification Rated power Surge power 700W Specifications 700W -1400 W, 6s Output 110V AC (+- 5%) * Output frequency 50/60 Hz (+- 0.1%) Voltage input Voltage range Efficiency at rated Vdc, full load (%) 24V DC 20.6~31.6V DC 92% No load current draw (A @ nominal voltage) <0.64A Operating temperature -20 ~ +40 Storage temperature -30 ~ +70 Working humidity Dimensions Weight Max. 90%, non-condensing 12 x8 x3 6lbs *100V/110V/115V/120V Adjustable on the inverter www.streetlights-solar.com