Machine for Industrial Applications A 934 C ERC Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): 83,650-84,350 lb 129 kw / 173 HP 129 kw / 175 HP With the award-winning ERC system
A 934 C ERC Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): 83,650-84,350 lb 173 HP / 129 kw 175 HP / 129 kw 2 A 934 C ERC Litronic Machine for Industrial Applications
Performance Liebherr material handlers are designed to deliver the highest productivity and performance. They are built to provide high lifting capacities and quick cycle times for a smooth and efficient workflow on material handling operations. A wide range of attachments and task specific configurations make these machines ideally suited to a wide range of applications. Reliability Liebherr hydraulic excavators are designed and built to operate in the most extreme material handling environments. Their innovative and rugged design ensures maximum performance and longevity. Comfort The spacious and ergonomically designed Liebherr operator s cab provides a wide view to the working area. The operator s seat can be individually adjusted for maximum comfort and all tool controls and displays have been carefully arranged for ease of operation. Air conditioning is also a standard feature that maintains a comfortable work environment during working shifts. Economy The Liebherr Litronic System increases machine performance, reduces fuel consumption and minimizes service and maintenance related costs. Liebherr s full line of material handlers ensures a machine sized to handle the task requirements for any material handling operation. A 934 C ERC Litronic Machine for Industrial Applications 3
With the award-winning ERC system ERC System More performance, less consumption The principle is simple: As the equipment fitting is lowered, this causes the gas present in the cylinder to be compressed. When the attachment fitting is raised, the energy stored in the gas cylinder provides support for the two lifting cylinders, and less performance is required. 1. Attachment fitting raised / Energy released 2. Lower attachment fitting / Store energy 4. Raise attachment fitting / Release energy Liebherr diesel engine Long life expectancy, expansive cylinder capacity and increased weight According to level IIIA / Tier 3 Specially Developed for construction and industrial machinery operation Oil supply even with 100 % tilt angle Excellent torque 4 A 934 C ERC Litronic Machine for Industrial Applications
Performance The A 934 C ERC Litronic has been designed for maximum productivity. Precisely engineered, the Liebherr developed and Liebherr manufactured components including the diesel engine, hydraulic pumps and motors, as well as swing gear and cylinders, guarantee maximum performance. This results in a high lifting capacity with fast working cycles. Innovative solutions Multiple attachments High lifting capacities Quick cycle times Performance without compromise ReGenerationPlus ERC System Liebherr can provide a machine for any material handling application. A straight or angled industrial mono boom can be combined with various industrial sticks and a wide array of attachments to handle any task. The efficient handling of different materials, for example, scrap, wood, sand and gravel or bulk solids, is ensured by the most efficient use of the kinematics of the machine. A separate hydraulic circuit with a maximum hydraulic pressure of 5500psi makes a high swing torque possible. Rapid work cycles are achieved through an independent control system. Maximum performance and maximum forces are available to the operator at all times. The new ReGenerationPlus system on the lifting cylinders saves energy and quickly lowers the attachment. The energy stored by the lowering of the equipment in the ERC System gives the machine up to 107 HP in added performance capacity. This is released again when the equipment is raised, and is also reflected in more powerful and more homogenous work sequences. The result is a clear saving on fuel and, at the same time, even greater performance. 3. Attachment fitting lowered / Energy stored Robust undercarriage The box-type construction of the undercarriage with securely-welded supports provides a solid base, the greatest stability and a long service life in every application An additional dozer blade can be selected 2-range powershift transmission for stepless acceleration Litronic-System Increases productivity of the excavator Reduces fuel consumption Reduces service costs and eases operation Allows maximum sensitivity and as many overlapping movements as are required A 934 C ERC Litronic Machine for Industrial Applications 5
Features High-tensile steel plates in highstress areas for the toughest of applications Stable storage of attachments and cylinders Maximum resistance, even when lifting heavy loads 6 A 934 C ERC Litronic Machine for Industrial Applications
Reliability Liebherr material handlers prove themselves day in and day out in a variety of applications throughout the world. Many years of experience as the world s largest manufacturer of wheeled excavators along with continuous product development with the latest technology, have enabled Liebherr to offer a safe and reliable product to the market. With its rugged design and quality Liebherr products, the A 934 C ERC Litronic has been designed for performance and longevity. Quality in detail Liebherr components Functional safety Liebherr develops, tests and manufactures components such as the diesel engine, slewing gear, hydraulic cylinders and electronics specifically for the material handling market. Parts, such as the engine and pumps, are being synchronized with each other as early as the initial build stage to ensure a constant standard of quality. Safety oriented components are built as standard into the base units by Liebherr. The operator can concentrate fully on the task at hand knowing that the integrated on board electronics are performing a constant check using pre-defined data to keep the operator and others on the job site safe. A magnetic bar is fitted into the hydraulic tank as standard to help increase the operating life of the hydraulic system. Rugged attachments Working attachment Piping The stable attachments are designed for the harshest applications and have a long service life. All components have been optimised using the FE method. Stress-reducing two-sided cylinder bearings on mono and arm connections. Integrated large diameter torsion tube for the best possible force absorption by the attachment components. Routing the hydraulic lines in the arm offers the best protection against damage. The electric cabling is made with high-grade materials, thus guaranteeing a reliable supply to the consumer. Liebherr hydraulic cylinders Specific size for each machine High-grade surface coating of the piston rods All Liebherr cylinders feature special long-life sealing systems Shock absorption at both sides in the working cylinders Functional safety Essential operating data is stored and can be recalled at any time Control and monitoring functions increase functional safety of the machine Four fixed working modes for output discharge facilitate an effective and efficient operation: ECO-Mode: High handling and loading performance coupled with low fuel consumption POWER-Mode: For maximum handling and loading performance under severe conditions LIFT-Mode: for precise handling of heavy loads FINE-Mode: for fine control at precision work A 934 C ERC Litronic Machine for Industrial Applications 7
Large-sized cab Adjustable steering column Operator s seat, adjustable in height and can also be adapted to the individual weight of the operator Consoles with or without possibility of horizontal adjustment Large roof window Sun blinds 8 A 934 C ERC Litronic Machine for Industrial Applications
Comfort The excavator operator is provided with an ergonomically arranged working area within the Liebherr cabs. All switches and functions are logically laid out. The operator s seat, steering column and controls can be individually adjusted to guarantee comfortable working environment so the operator can maintain maximum productivity for the entire shift. Mobile comfort Easy access Optimum visibility Pleasant surroundings The operator has wide steps, ergonomically positioned handles and adjustable steering column to allow easy access into the Liebherr cab. Liebherr has designed a well thought out design for the upper carriage. The cab features large glass panels and rounded edges to increase overall visibility and guarantees a safe overview of the entire working area. Reduced engine speed together with elaborate sound insulation, as well as optimized hydraulic components, allow a comfortable noise level both inside and out. The noise level is comparable with that of modern cars. Maintenance features Simple maintenance Ease of operation Easy access The Liebherr excavators come standard with a semiautomatic lubrication system for the boom, stick attachments as well as the slewing gear. A shut-off valve, fitted to the hydraulic tank as standard, disconnects the system and guarantees ease of maintenance to the hydraulic system. Large, lockable maintenance doors allow easy and safe access to all maintenance points. Storage compartment Everything has its place Ample storage space for a commercially-approved cooler box behind the operator s seat Drinks holder and storage compartment in operator s cab Large storage box behind the operator s cab Two standard tool boxes in the undercarriage Fully-automatic air-conditioning system The air-conditioning system, fitted as standard, offers the same comfort as that of a regular car Two sensors for precise temperature regulation Ventilation flaps are controlled via keys Defrost function for quick dehumidifying / defrosting of the windshield A 934 C ERC Litronic Machine for Industrial Applications 9
Hydrostatic fan drive Accelerated warm-up period Guaranteed constant oil quality as a result of constant oil temperature Increased life expectancy of drive components The fan only runs at the output required, thus conserving fuel and reducing the noise level considerably Thermostatic control 10 A 934 C ERC Litronic Machine for Industrial Applications
Economy Liebherr offers a wide range of Material Handlers models to maximize productivity in any application. Easy access to components and service points on the Liebherr Material Handlers allow for quick maintenance and minimal downtime reducing operating costs and maximizing production. Low operating costs Liebherr engine Automatic engine idle Intelligent hydraulic management Hydraulicallyadjustable cab Investment for the future Extensive service offer High resale values ERC System Full engine power available even at low speeds. This means that unrestricted power is available when it is really required, providing high levels of productivity and low fuel consumption. A great feature of the Liebherr material handler is the Auto Engine Idle. The machine will automatically idle the engine if a hydraulic or engine function is not used over a period of time. The joysticks contain a proximity switch that once the operator is range of the joystick the engine will automatically return to operating RPM. The state-of-the-art hydraulic system allows conversion of the maximum engine output into high force or speed, as required. The hydraulically-adjustable cab allows the driver to optimise his field of view to increase material-handling performance. Especially important when working with ships, barges or transloading material from trucks or railcars to maximize point of site to the working area. Our service personnel is trained directly at the manufacturing plants and endorsed by our tight-knit network of dealers. Liebherr Material Handlers are designed with the highest grade materials possible providing the highest quality, with best fuel economy. When time comes to exchange for the next Liebherr, rest assured that a Liebherr Material Handler commands the best residual value in the Material Handling Industry. The ERC System supports the equipment when lifting. This means that engine speeds can be lower, while at the same time smaller lifting cylinders can be fitted. That in turn substantially reduces the machine s fuel consumption, and leads to even greater economy. Service oriented Engine service points - such as the filter or capacity displays - easily to access and reach via a catwalk The magnet bar in the hydraulic oil tank acts as a service indicator and increases the service life of the oil Liebherr semi-automatic central lubricating systems for the slewing gear and main attachment components fitted as standard for quick and targeted maintenance A wide range Modular quick connection system Liebherr mechanical and hydraulic quick connection for efficient changing of working tools Comprehensive Liebherr grab program Wide range of Liebherr grabs for different applications A 934 C ERC Litronic Machine for Industrial Applications 11
Technical Data Engine Rating per SAE J1349 173 HP (129 kw) at 1,700 rpm Rating per ISO 9249 175 HP (129 kw) at 1,700 rpm Model Liebherr D 934 L according to level IIIA / Tier 3 Type 4 cylinder in-line Bore/Stroke 4.8/5.9 in Displacement 427 in 3 Engine operation 4-stroke diesel unit pump system turbo-charged and after-cooled reduced emissions Cooling water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements, automatic dust discharge Fuel tank 153 gal Standard sensor controlled engine idling Electrical system Voltage 24 V Batteries 2 x 170 Ah/12 V Starter 24 V/6.6 kw Alternator three phase current 28 V/80 A Option Liebherr particle filter Hydraulic System Hydraulic pump for attachment and travel drive two Liebherr variable flow, swash plate pumps Max. flow 2 x 59 gpm Max. pressure 5,076 psi Pump regulation electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensation, automatic oil flow optimizer Hydraulic pump for swing drive reversible, variable flow, swash plate pump, closed-loop circuit Max. flow 36 gpm Max. pressure 5,511 psi Hydraulic tank 93 gal Hydraulic system 156 gal Hydraulic oil filter 2 full flow filters in return line with inte grated fine filter area (5 µm) Hydraulic oil cooler compact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan MODE selection adjustment of machine performance and the hydraulics via a mode selector to match application ECO for especially economical and environ mentally friendly operation POWER for maximum digging power and heavy duty jobs LIFT for lifting FINE for precision work and lifting through very sensitive movements RPM adjustment stepless adjustment of engine output via the rpm at each selected mode Tool Control (Option) ten preadjustable pump flows and pres sures for add on tools Hydraulic Controls Power distribution via control valves in single block with integrated safety valves Flow summation to stick Closed-loop circuit for uppercarriage swing drive Servo circuit Attachment and swing proportional via joystick levers Travel proportional via foot pedal Additional functions via foot pedals or joystick push buttons Swing Drive Drive Liebherr swash plate motor with integrated brake valves Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 0 7.5 rpm stepless Swing torque 62,000 lbf ft Holding brake wet multi-disc (spring applied, pressure released), pedal controlled positioning brake Operator s Cab Cab resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window Operator s seat fully adjustable, shock absorbing suspen sion, adjustable to operator s weight and size, 6-way adjustable Liebherr seat Joysticks integrated into adjustable consoles Monitoring menu driven query of current operating conditions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine data, for example, engine overheating, low engine oil pressure or low hydraulic oil level Air conditioning standard air conditioning, combined cooler/ heater, additional dust filter in fresh air/recirculated Noise emission ISO 6396 L pa (inside cab) = 74 db(a) 2000/14/EC L WA (surround noise) = 103 db(a) Undercarriage Drive Liebherr variable flow swashplate motor with automatic brake valves Transmission oversized two speed power shift trans mission with additional creeper speeds Travel speed 0 1.6 mph (creeper speed off road) 0 3.1 mph (off road) 0 6.2 mph (creeper speed on road) 0 12.4 mph (road travel) Axles 132,300 lb excavator axles; automatic or operator controlled front axle oscillation lock Service and holding brakes multiple wet discs Parking brake multiple wet discs (spring applied pressure released) Stabilization 4-point outriggers with suspended rocker arm supports Attachment Type high-strength steel plates at highly- stressed points for the toughest requirements. Complex and stable mountings of attachment and cylinders. Unrivalled strength, even at high loads Hydraulic cylinders Liebherr cylinders with special seal system. Shock absorption Pivots sealed, low maintenance Lubrication Liebherr semi-automatic central lubrication system 12 A 934 C ERC Litronic Machine for Industrial Applications
Dimensions E D A1 A W H C K Q X T4 V L U4 Z M T1 B1 B F G P Hydraulic Cab Elevation ft in A 10 A 1) 9 10 A1 10 8 A1 1) 11 2 B 9 10 B1 15 5 C 11 1 D 10 4 E 10 4 H 9 4 K 4 10 L 9 10 M 4 11 Q 10 T1 4 4 T4 4 4 U4 18 5 Z 19 4 1) Rigid cab elevation E = Tail radius Industrial-Type Straight Mono Boom 24 11 and Industrial-Type Stick ft in 19 8 V ft in 22 6 W ft in 12 2 X ft in 36 7 Industrial-Type Straight Mono Boom 28 3 and Industrial-Type Stick ft in 19 8 22 12 V ft in 24 5 21 2 W ft in 9 4 14 11 X ft in 40 39 4 Industrial Stick ft in 19 8 24 7 F ft in 20 10 25 9 G ft in 4 1 4 1 P ft in 3 5 3 5 Dimensions are with attachment over steering axle Tires 12.00-20 A 934 C ERC Litronic Machine for Industrial Applications 13
Industrial Attachment with Industrial-Type Straight Mono Boom 24 11 ft m 16 50 15 45 14 13 40 12 35 11 10 30 9 25 8 7 20 6 15 5 4 10 3 2 5 1 0 0-1 -5-2 -10-3 -4 1-15 -5-20 -6 2-7 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 45 40 35 30 25 20 15 10 5 0 m ft Attachment Envelope Kinematic variant 2A 1 with industrial stick 19 8 2 with industrial stick 19 8 and grapple model GM 70C Operating Weight Operating weight includes basic machine A 934 C ERC litronic` with 4 point outriggers, hydraulic cab elevation, 8 solid tires plus intermediate rings and industrial application with industrial-type straight mono boom 24 11. with grapple model GM 70C/1.05 yd 3 semi-closed tines Weight industrial stick 19 8 83,670 lb 14 A 934 C ERC Litronic Machine for Industrial Applications
Lift Capacities with Industrial-Type Straight Mono Boom 24 11 (Kinematic Variant 2A) Industrial Stick 19 8 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft ft Undercarriage ft in 55 50 45 40 35 30 25 20 15 10 5 0 5 10 15 18,2* 18,2* 15,3* 15,3* 18,2* 18,2* 15,3* 15,3* 22 20,0* 20,0* 14,0 17,5* 10,5 12,8* 20,0* 20,0* 17,5* 17,5* 12,8* 12,8* 29 14,4 16,9* 10,3 13,2 8,0 10,5 16,9* 16,9* 15,3* 15,3* 11,6* 11,6* 33 9 14,4 16,8* 10,4 13,3 7,7 10,0 6,7 8,8 16,8* 16,8* 15,1* 15,1* 13,9* 13,9* 11,0* 11,0* 37 5 19,8* 19,8* 14,0 17,1* 10,3 13,2 7,7 10,0 5,8 7,7 19,8* 19,8* 17,1* 17,1* 15,3* 15,3* 13,8* 13,8* 10,6* 10,6* 40 19,3 20,9* 13,4 17,2 9,9 12,8 7,5 9,8 5,8 7,7 5,2 7,0 20,9* 20,9* 17,8* 17,8* 15,6* 15,6* 14,0* 14,0* 12,2 12,6* 10,5* 10,5* 41 9 28,0 28,7* 17,9 22,6* 12,6 16,4 9,4 12,3 7,2 9,5 5,6 7,6 4,9 6,6 28,7* 28,7* 22,6* 22,6* 18,8* 18,8* 16,2* 16,2* 14,2* 14,2* 12,1 12,6* 10,5* 10,5* 43 45,2 45,3* 24,5 32,4* 16,2 21,4 11,7 15,3 8,8 11,6 6,9 9,2 5,4 7,4 4,6 6,4 45,3* 45,3* 32,4* 32,4* 24,4* 24,4* 19,8* 19,8* 16,7* 16,7* 14,5* 14,5* 11,9 12,6* 10,4 10,7* 43 7 6,9* 6,9* 21,3 29,8 14,6 19,7 10,7 14,4 8,2 11,0 6,5 8,8 5,3 7,2 4,6 6,3 6,9* 6,9* 35,3* 35,3* 26,0* 26,0* 20,6* 20,6* 17,1* 17,1* 14,2 14,5* 11,7 12,3* 10,2* 10,2* 43 7 7,5* 7,5* 19,4 22,0* 13,3 18,4 10,0 13,6 7,8 10,5 6,2 8,5 5,1 7,0 4,6 6,3 7,5* 7,5* 22,0* 22,0* 26,5* 26,5* 20,9* 20,9* 17,1* 17,1* 13,9 14,2* 11,5 11,6* 9,3* 9,3* 43 18,5 20,5* 12,6 17,6 9,5 13,0 7,4 10,2 6,0 8,3 5,0 6,9 5,0 6,8 20,5* 20,5* 25,3* 25,3* 20,1* 20,1* 16,3* 16,3* 13,2* 13,2* 9,9* 9,9* 9,5* 9,5* 40 6 12,4 17,4 9,2 12,8 7,3 10,0 6,1 8,4 21,9* 21,9* 17,7* 17,7* 14,2* 14,2* 11,4* 11,4* 34 4 Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity values indi cated are attained at the corresponding operating temperature. This operating temperature is ensured by continuous movement of the boom. Weights of fitted working tools (grabs, load hooks, etc.) and load accommodation equipment are to be deducted from the lift capacity values. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. A 934 C ERC Litronic Machine for Industrial Applications 15
Industrial Attachment with Industrial-Type Straight Mono Boom 28 3 ft m 18 55 17 16 50 15 45 14 13 40 12 35 11 10 30 9 25 8 7 20 6 15 5 4 10 3 5 2 1 0 0-5 -1-2 -10-3 1-4 -15-5 2-20 -6 3-7 -25-8 4 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 55 50 45 40 35 30 25 20 15 10 5 0 m ft Attachment Envelope Kinematic variant 2A 1 with industrial stick 19 8 2 with industrial stick 24 7 3 with industrial stick 19 8 and grapple model GM 65 4 with industrial stick 24 7 and grapple model GM 65 Operating Weight Operating weight includes basic machine A 934 C ERC litronic` with 4 point outriggers, hydraulic cab elevation, 8 solid tires plus intermediate rings and industrial application with industrial-type straight mono boom 28 3. with grapple model GM 65/0.78 yd 3 semi-closed tines Weight industrial stick 19 8 83,780 lb industrial stick 24 7 84,330 lb 16 A 934 C ERC Litronic Machine for Industrial Applications
Lift Capacities with Industrial-Type Straight Mono Boom 28 3 (Kinematic Variant 2A) Industrial Stick 19 8 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft ft Undercarriage ft in 55 50 45 40 35 30 25 20 15 10 5 0 5 10 15 21,5* 21,5* 17,0* 17,0* 19 4 21,5* 21,5* 17,0* 17,0* 20,1* 20,1* 13,7 17,2* 11,0 13,6* 20,1* 20,1* 17,2* 17,2* 13,6* 13,6* 27 11 14,3 16,6* 10,2 13,1 7,9 10,4 33 7 16,6* 16,6* 14,7* 14,7* 12,1* 12,1* 14,4 16,4* 10,4 13,3 7,6 10,0 6,3 8,4 16,4* 16,4* 14,5* 14,5* 13,1* 13,1* 11,3* 11,3* 37 11 19,4* 19,4* 14,2 16,5* 10,3 13,2 7,7 10,0 5,7 7,6 5,3 7,2 41 1 19,4* 19,4* 16,5* 16,5* 14,5* 14,5* 13,0* 13,0* 11,8* 11,8* 10,8* 10,8* 19,7 20,1* 13,7 17,0* 10,0 12,9 7,5 9,8 5,7 7,6 4,6 6,4 43 6 20,1* 20,1* 17,0* 17,0* 14,8* 14,8* 13,1* 13,1* 11,8* 11,8* 10,4 10,6* 27,1* 27,1* 18,4 21,3* 12,8 16,6 9,4 12,3 7,2 9,5 5,5 7,4 4,2 5,9 4,2 5,8 45 3 27,1* 27,1* 21,3* 21,3* 17,6* 17,6* 15,1* 15,1* 13,3* 13,3* 11,9* 11,9* 9,7 10,5* 9,7 10,4* 45,2* 45,2* 25,5 30,1* 16,5 21,9 11,8 15,5 8,8 11,6 6,8 9,1 5,3 7,2 4,1 5,8 3,9 5,5 46 4 45,2* 45,2* 30,1* 30,1* 22,8* 22,8* 18,5* 18,5* 15,6* 15,6* 13,6* 13,6* 11,7 11,9* 9,6 10,4* 9,2 9,9* 21,4 29,9 14,5 19,7 10,6 14,3 8,1 10,9 6,3 8,6 5,0 6,9 4,0 5,6 3,7 5,2 46 9 33,0* 33,0* 24,3* 24,3* 19,3* 19,3* 16,1* 16,1* 13,8* 13,8* 11,4 12,0* 9,5 10,2* 8,9 9,4* 13,0* 13,0* 12,8 17,9 9,6 13,2 7,4 10,2 5,9 8,2 4,7 6,6 3,9 5,5 3,6 5,2 46 9 13,0* 13,0* 25,2* 25,2* 19,8* 19,8* 16,3* 16,3* 13,6 13,8* 11,1 11,8* 9,3 9,8* 8,8* 8,8* 11,4* 11,4* 11,7 16,6 8,8 12,4 6,9 9,7 5,5 7,8 4,5 6,4 3,8 5,4 3,6 5,2 46 4 11,4* 11,4* 24,8* 24,8* 19,7* 19,7* 16,1* 16,1* 13,2 13,5* 10,9 11,3* 8,9* 8,9* 7,9* 7,9* 13,0* 13,0* 11,1 16,0 8,3 11,9 6,6 9,3 5,3 7,6 4,4 6,3 3,9 5,6 43 9 13,0* 13,0* 22,9* 22,9* 18,6* 18,6* 15,3* 15,3* 12,6* 12,6* 10,2* 10,2* 8,0* 8,0* 10,9 15,8 8,1 11,7 6,4 9,1 5,2 7,5 4,7 6,8 37 7 19,2* 19,2* 16,2* 16,2* 13,4* 13,4* 10,8* 10,8* 9,5* 9,5* Industrial Stick 24 7 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft ft Undercarriage ft in 55 14,5* 14,5* 14,5* 14,5* 19 11 50 14,4 15,1* 10,5 11,2* 29 3 15,1* 15,1* 11,2* 11,2* 45 15,2 15,4* 10,8 13,7* 7,7 10,1 7,5 9,8 35 6 15,4* 15,4* 13,7* 13,7* 10,5* 10,5* 9,8* 9,8* 40 11,2 13,3* 8,2 10,6 5,9 7,9 5,8 7,8 40 1 13,3* 13,3* 12,1* 12,1* 9,3* 9,3* 9,0* 9,0* 35 11,3 13,2* 8,3 10,7 6,2 8,2 4,8 6,6 43 9 13,2* 13,2* 12,0* 12,0* 11,0* 11,0* 8,5* 8,5* 30 11,1 13,3* 8,3 10,6 6,2 8,2 4,6 6,3 4,1 5,7 46 6 13,3* 13,3* 12,0* 12,0* 10,9* 10,9* 10,1* 10,1* 8,2* 8,2* 25 14,9 15,4* 10,8 13,6* 8,0 10,4 6,1 8,0 4,6 6,3 3,7 5,2 48 8 15,4* 15,4* 13,6* 13,6* 12,1* 12,1* 11,0* 11,0* 10,0* 10,0* 8,0* 8,0* 20 14,0 16,1* 10,2 13,1 7,6 10,0 5,8 7,8 4,5 6,1 3,4 4,8 3,3 4,8 50 3 16,1* 16,1* 14,0* 14,0* 12,4* 12,4* 11,1* 11,1* 10,0 10,1* 8,2 8,4* 8,0* 8,0* 15 19,5* 19,5* 18,5 20,6* 12,9 16,7 9,5 12,4 7,2 9,5 5,5 7,5 4,3 5,9 3,3 4,7 3,1 4,5 51 3 19,5* 19,5* 20,6* 20,6* 17,0* 17,0* 14,5* 14,5* 12,7* 12,7* 11,3* 11,3* 9,8 10,1* 8,1 8,9* 7,8 8,0* 10 44,7* 44,7* 25,2 29,6* 16,3 21,6 11,6 15,3 8,6 11,5 6,6 8,9 5,1 7,1 4,0 5,7 3,2 4,6 2,9 4,3 51 8 44,7* 44,7* 29,6* 29,6* 22,3* 22,3* 18,0* 18,0* 15,1* 15,1* 13,1* 13,1* 11,5* 11,5* 9,6 10,1* 8,0 8,8* 7,5 8,1* 5 5,8* 5,8* 20,8 29,3 14,1 19,2 10,3 13,9 7,8 10,6 6,1 8,4 4,8 6,7 3,8 5,5 3,1 4,5 2,8 4,2 51 8 5,8* 5,8* 32,4* 32,4* 23,8* 23,8* 18,8* 18,8* 15,6* 15,6* 13,3* 13,3* 11,2 11,5* 9,3 10,0* 7,9 8,4* 7,5 7,6* 0 5,0* 5,0* 16,0* 16,0* 12,3 17,3 9,1 12,7 7,1 9,8 5,6 7,8 4,5 6,4 3,6 5,3 3,0 4,4 2,8 4,2 51 3 5,0* 5,0* 16,0* 16,0* 24,6* 24,6* 19,3* 19,3* 15,9* 15,9* 13,3 13,4* 10,9 11,4* 9,1 9,7* 7,7* 7,7* 7,0* 7,0* 5 6,7* 6,7* 13,9* 13,9* 11,1 16,1 8,3 11,9 6,5 9,3 5,2 7,4 4,2 6,1 3,5 5,1 2,9 4,4 49 9 6,7* 6,7* 13,9* 13,9* 24,2* 24,2* 19,1* 19,1* 15,6* 15,6* 12,8 13,1* 10,6 11,0* 8,9 9,0* 6,5* 6,5* 10 14,8* 14,8* 10,5 15,4 7,8 11,4 6,1 8,9 4,9 7,2 4,0 5,9 3,4 5,0 3,3 4,9 14,8* 14,8* 22,4* 22,4* 18,0* 18,0* 14,7* 14,7* 12,2* 12,2* 10,0* 10,0* 7,7* 7,7* 7,2* 7,2* 45 11 15 10,3 15,2 7,6 11,1 6,0 8,7 4,8 7,1 4,2 6,2 38 6 18,8* 18,8* 15,6* 15,6* 12,8* 12,8* 10,4* 10,4* 8,8* 8,8* Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity values indi cated are attained at the corresponding operating temperature. This operating temperature is ensured by continuous movement of the boom. Weights of fitted working tools (grabs, load hooks, etc.) and load accommodation equipment are to be deducted from the lift capacity values. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. A 934 C ERC Litronic Machine for Industrial Applications 17
Choice of Cab Elevation and Cab Protection D Rigid Cab Elevation Height 2 7 3 11 4 11 6 7 C B A A 11 12 4 13 4 15 B 12 2 13 5 14 5 16 1 C 13 9 15 1 16 1 17 9 D 2 3 2 3 2 3 2 3 A rigid cab elevation has a fixed eye level height. For a lower transport height the shell of the cab can be removed. The overall height is then dimension A. For additional protection of the operator a cab guard with or without screen cab guard and a front window screen are available. C2 B2 C1 B1 D2 D1 E Hydraulic Cab Elevation (Parallelogram) B1 9 6 B2 17 8 C1 11 1 C2 19 4 D1 4 6 D2 5 4 E 10 10 The parallelogram cab raiser allows the operator to choose his field of view between dimensions B1 and B2. For a transport height lower than C1 the shell of the cab can be removed. The overall height is then E. As cab protection a front window screen can be installed. Grille above Grilles in front 18 A 934 C ERC Litronic Machine for Industrial Applications
Variety of Tools Shells for loose material with Shells for Loose Material Clamshell Model GM 20B cutting edge (without teeth) Cutting width of shells ft in 3 3 3 11 5 3 Capacity yd 3 1.70 1.96 2.62 For loose material, specific weight up to lb/yd 3 2,530 2,530 2,530 Weight lb 2,985 3,120 3,415 Multiple Tine Grapples open tines semi-closed tines closed tines Grapple Model GM 64 Capacity yd 3 0.52 0.78 0.52 0.78 0.52 0.78 (4 tines) Weight lb 1,865 2,490 2,325 2,930 2,335 3,350 Grapple Model GM 65 Capacity yd 3 0.52 0.78 0.52 0.78 0.52 0.78 (5 tines) Weight lb 2,535 2,710 2,835 3,120 2,920 3,350 Grapple Model GM 69 Capacity yd 3 1.05 1.44 1.05 1.44 1.05 1.44 (4 tines) Weight lb 2,965 3,075 3,385 3,615 4,190 4,540 Grapple Model GM 70C Capacity yd 3 1.05 1.44 1.05 1.44 1.05 1.44 (5 tines) Weight lb 3,275 3,505 3,760 4,100 4,300 4,400 Crane Hook with Suspension Max. load lb 27,560 Height with suspension ft in 3 1 Weight lb 210 Magnet Devices/Lifting Magnets Generator kw 13 20 Electromagnets with Suspension Power kw 8.5 10 Diameter of magnet ft in 4 3 4 7 Height with suspension ft in 3 7 3 7 Weight lb 2,975 4,035 A 934 C ERC Litronic Machine for Industrial Applications 19
Equipment Undercarriage Two circuit travel brake with accumulator Travel motor protection + Outrigger cylinder rod guards + Creeper speed electrically switchable from cab New tires Service free parking brake Independent outrigger control + Choice of tires + Auto check valve directly on each stabilizer cylinder Proportional power steering Customized colors + Two lockable storage boxes Two-speed power shift transmission Uppercarriage Electric fuel tank filler pump + Maintenance-free swing brake lock Handrails, non slip surfaces Main switch for electric circuit Engine hood with lift assistance Pedal controlled positioning swing brake Reverse travel warning system + Sound insulation Customized colors + Maintenance-free HD-batteries Lockable tool box Tool kit Hydraulics Hydraulic tank shut-off valve Extra hydr. control for hydr. swivel + Pressure compensation Hook up for pressure checks Pressure storage for controlled lowering of attachments with engine turned off Filter with partial micro filtration (5 µm) Electronic pump regulation Stepless mode system (ECO) Flow compensation Four mixed modes, can also be adjusted Full flow micro filtration + Bio degradable hydraulic oil + Tool Control + Additional hydraulic circuits + Engine Turbo charger After-cooled Sensor controlled engine idling Liebherr particle filter + Unit pump system Air filter with pre-cleaner main- and safety element = Standard, + = Option Operator s Cab Storage tray Displays for engine operating condition Mechanical hour meters, readable from outside the cab Roof hatch 6-way adjustable seat Airpressure operator seat with heating and head-rest + Seat and consoles independently adjustable Extinguisher + Removable customized foot mat Dome light Hydraulic cab elevation + Rigid cab elevation + Cab heater with defroster Coat hook Air conditioning Electric cooler + Steering wheel adjustable Bullet proof window (fixed installation can not be opened) + Stereo radio + Preparation for radio installation + Rain visor over front window opening Beacon + Tinted windows Door with sliding window Optical warning if outriggers are not fully retracted + Auxiliary heating + Sun shade + Sun roller blind Electronic theft protection + Wiper/washer Cigarette lighter and ashtray Additional flood lights + Attachment Flood lights ERC system Hydr. lines for clam operation in sticks Sealed pivots Safety lift hook + Liebherr line of clams + Liebherr semi-automatic central lubrication system Liebherr fully-automatic central lubrication system + Safety check valves on hoist cylinder Safety check valves on stick cylinder Hose quick connection Customized colors + Special buckets and other tools + Overload warning device + Two way valves for bucket/clam use + Locking of connections for clam operation + Cylinders with shock absorber Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty. All illustrations and data may differ from standard equipment. Subject to change without notice. Printed in Germany by Schirmer RG-BK-RP LHB/VF 11314647-0.5-05.12_enUS Liebherr Construction Equipment Co. 4100 Chestnut Avenue, Newport News, VA 23607, USA +1 (757) 245 5251, Fax +1 (757) 928 8701 www.liebherr.us, E-Mail: info.lce@liebherr.com