80T capacity class Boom truck crane Datasheet imperial Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional jib 190 ft maximum tip height with 57 ft jib Tilting operator cab standard Rated capacity indicator with work area definition
CONTENTS Key........................................................................................... 3 Page: Dimensions Crane Dimensions......................................................................... 4-5 Selected Crane Configuration Axle Loads.................................................... 5 Range Diagram............................................................................ 6 Load Charts Boom..................................................................................... 7-9 Jib........................................................................................ 10 Technical Description Boom, Jib and Rotation..................................................................... 11 Hoists and Rope........................................................................... 11-12 Hydraulics................................................................................. 12 Upper Operator Cab........................................................................ 12 Boom Rotation............................................................................ 13 Counterweight............................................................................. 13 Outriggers................................................................................. 13 2
KEY Main boom Counterweight Boom length Main Hoist Tip height Auxiliary hoist Boom with jib Hoist line speed Telescoping mode Operator aid Boom angle Cab Working radius Chassis Engine Information Main boom with aux head Hydraulics Boom head Heating / Air conditioning Hook block Outriggers Hook to head sheave pin Rotation / Allowable rotation range Rope Standard / Optional Slewing brake Rope diameter Boom over the rear Rope length Boom over the front Permissible line pull Area of operation Maximum line pull 3
DIMENSIONS Crane Dimensions 4
DIMENSIONS Crane Dimensions Selected Crane Configuration Axle Loads Truck Axle Jib Counter- Auxiliary Main Gross Total Total Brand Configuration weight Winch Hook Block Vehicle Front Axles Rear Axles Weight Weight Weight Freightliner Twin Steer / Tridem Bare Chassis with no Crane Fitted 124,615 lbs 13,875 lbs 10,740 lbs Freightliner Twin Steer / Tridem None 13,000 lbs No 75 US ton 184,460 lbs 36,830 lbs 47,630 lbs Freightliner Twin Steer / Tridem 33/57 ft 15,000 lbs Yes 75 US ton 198,850 lbs 34,350 lbs 64,500 lbs Freightliner Twin Steer / Tridem Maximum Allowable Axle Loads 107,680 lbs 39,680 lbs 68,000 lbs 5
RANGE DIAGRAM Outriggers Fully Extended (100%) 6
BOOM LOAD CHART Outriggers Fully Extended (100%) 15,000 lbs (100%) 360 40 to 126 ft Standard ASME B30.5 Boom Length 40 ft 54 ft 66 ft 78 ft 90 ft 102 ft 114 ft 126 ft ft lbs lbs lbs lbs lbs lbs lbs lbs ft 10 160000 102500 10 12 125600 102500 12 15 108800 100500 80600 15 20 84500 85300 71900 62200 56200 20 25 65400 66400 64800 55700 48000 41900 25 30 52600 53700 54200 49700 41700 36400 31500 30 35 44500 45000 43800 36600 32100 29500 24700 35 40 35200 35700 36000 32800 28600 26200 24600 40 45 28200 28800 29100 29300 25700 23500 22100 45 50 23700 24100 24300 23400 21400 20000 50 55 19800 20300 20400 20600 19500 18200 55 60 17200 17400 17500 17600 16600 60 65 14700 15000 15100 15200 15200 65 70 12600 12900 13100 13200 13300 70 75 11200 11400 11500 11600 75 80 9700 9900 10000 10100 80 85 8600 8800 8900 85 90 7500 7700 7800 90 95 6500 6700 6800 95 100 5800 6000 100 105 5000 5200 105 110 4500 110 115 3900 115 Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 7
BOOM LOAD CHART Mid Position Outriggers (50%) 15,000 lbs (50%) 360 40 to 126 ft Standard ASME B30.5 Boom Length 40 ft 54 ft 66 ft 78 ft 90 ft 102 ft 114 ft 126 ft ft lbs lbs lbs lbs lbs lbs lbs lbs ft 10 139900 102500 10 12 122800 102500 12 15 102900 100500 80600 15 20 76400 77500 71900 62200 56200 20 25 48200 49400 49800 50100 48000 41900 25 30 33700 35100 35500 35800 36000 36100 31500 30 35 25600 26100 26400 26600 26700 26900 24700 35 40 19300 19800 20100 20300 20400 20600 20600 40 45 14800 15500 15700 15900 16100 16200 16300 45 50 12200 12500 12700 12900 13000 13100 50 55 9700 10100 10300 10400 10500 10600 55 60 8100 8400 8500 8600 8700 60 65 6500 6800 6900 7000 7100 65 70 5100 5400 5600 5700 5800 70 75 4300 4500 4600 4700 75 80 3300 3600 3700 3800 80 85 2700 2900 3000 85 90 2000 2200 2300 90 Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 8
BOOM LOAD CHART Outriggers Fully Retracted (0%) 15,000 lbs (0%) 360 40 to 126 ft Standard ASME B30.5 Boom Length 40 ft 54 ft 66 ft 78 ft 90 ft 102 ft 114 ft 126 ft ft lbs lbs lbs lbs lbs lbs lbs lbs ft 10 50900 51800 10 12 37100 38000 12 15 25000 26200 26500 15 20 14500 15600 16100 16400 16500 20 25 8800 9900 10400 10700 10900 11000 25 30 5200 6200 6700 7100 7300 7500 7500 30 35 3800 4300 4600 4800 5000 5100 35 40 1900 2400 2800 3000 3200 3300 40 45 1100 1400 1600 1800 1900 45 Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 9
LOAD CHART With Jib, Outriggers Fully Extended (100%) 15,000 lbs (100%) 360 Standard ASME B30.5 0 33 ft Offsettable Jib 15 30 ft lbs ft lbs ft lbs 77 75 73 71 68 65 62 59 55 51 47 43 38 32 25 17 0 40 47 53 59 68 76 83 90 99 106 113 120 127 135 143 150 152 12500 12000 11500 10900 9900 9200 8900 7900 6500 5300 4400 3600 2900 2200 1600 1100 1000 51 56 62 67 75 82 89 96 104 111 118 125 132 139 145 150 8500 8100 7800 7500 7100 6700 6400 6200 5900 5000 4200 3500 2800 2000 1500 1100 56 61 67 72 79 86 93 99 107 114 121 126 132 138 6400 6200 6100 5900 5900 5600 5400 5300 5200 4800 4000 3400 2700 2000 57 ft Offsettable Jib 0 15 30 ft lbs ft lbs ft lbs 77 75 73 71 68 65 62 59 55 51 47 43 38 32 25 17 49 56 63 70 80 89 98 106 116 126 134 142 150 159 167 173 6500 6400 6200 6000 5400 4900 4500 4200 3800 3500 3300 2900 2200 1600 1100 800 Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. 4500 4300 4100 3900 3700 3500 3300 3100 2900 2800 2700 2600 2100 1600 1100 800 Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 65 71 77 83 92 100 108 115 124 132 140 147 154 162 169 174 76 81 87 92 100 107 114 121 129 136 143 149 156 162 3300 3200 3100 3000 2900 2800 2700 2600 2500 2500 2400 2300 2000 1600 10
Technical description Boom, Jib and Rotation Four-section full power fully synchronized telelscopic boom Boom length Retracted 40 ft Extended 126 ft Boom maximum tip height 135 ft Boom elevation angle range (min. / max.) -4 / 78 Boom head quick reeving 360 continuous rotation Load moment / Rated capacity indicator with work area definition ATB system Optional Swing-On Jib fixed length can be offset to 0, 15 or 30 Maximum tip height with fixed jib Swing-On Jib adjustable length can be offset to 0, 15 or 30 Maximum tip height with extended jib 32 ft 167 ft 33 ft / 57 ft 190 ft 5 metallic sheaves 80 T 5 metallic sheaves 60 T Quick reeving design Top swivel ball with hook and latch 12 T Hoists and Rope Two speeds Low Speed: High Speed: First layer (no load speed) 191 ft/min 335 ft/min Fifth layer (no load speed) 275 ft/min 487 ft/min Low Speed: High Speed: First layer 18,450 lb 10,002 lb Fifth layer 12,845 lb 6,963 lb Permissible line pull 13,800 lb 6 x 19 IWRC XIPS Maximum useable 561 ft 3 /4 in 11
Technical description Optional Two speeds Low Speed: High Speed: First layer (no load speed) 191 ft/min 335 ft/min Fifth layer (no load speed) 275 ft/min 487 ft/min Low Speed: High Speed: First layer 18,450 lb 10,002 lb Fifth layer 12,845 lb 6,963 lb Permissible line pull 13,800 lb 6 x 19 IWRC XIPS 3 /4 in Hydraulics Piston pump: Hoist Boom lift Boom telescope Gear pump: Swing / Outrigger / Counterweight / Cab tilt Full flow filtration with bypass protection: Suction Return Pressurized tank with sight level gauge 250 micron screen 5 micron filter 178 gal Upper Operator Cab Upper cab Sliding door on left side Sliding window on the right side Tilting, tinted glass skylight Removable front windshield Six-way adjustable seat with armrest dual-axis electro-proportional joysticks Joystick control for hoist(s), swing and boom elevation Foot pedals for swing brake and engine rpm Hand control for engine rpm Hydraulic cab tilt Optional features for upper cab Hydraulically powered air-conditioning and flameless heater Work lights Rated capacity indicator with pictograph display of boom radius, boom angle, boom length, allowable load, actual load and % of allowable load Settable alarms for swing angle, boom length, boom angle, tip height and work area exclusion zone Engine display provides operator cab readout of: Diesel fuel and DEF levels, engine status lamps, engine RPM, crane hours-of-operation, coolant temperature, oil pressure and throttle diagnostics 12
Technical description Boom Rotation Foot pedal actuated multi-disc brake and air actuated 360 house lock Hydraulic driven double planetary reduction gear drive 2.2 rev/min Counterweight Main counterweight, non removable, bolted to upper crane structure Removable counterweights 3,000 lb counterweight package 2,000 lb / 2,000 lb / 4,000 lb / 4,000 lb Outriggers X-pattern MAX Front: Swing, Out and Down To outer edge of pad Rear: Swing, Out and Down To outer edge of pad 28 ft 27-4 ft MID Front: Swing, Out and Down To outer edge of pad Rear: Swing, Out and Down To outer edge of pad 21-9 ft 21-2 ft 13
NOTES 14
NOTES 15
Effective Date: July 2014. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright Terex Cranes 2014 Terex Cranes, Global Marketing, Dinglerstraße 24, 66482 Zweibrücken, Germany Tel. +49 (0) 6332 830, Email: info.cranes@terex.com, www.terexcranes.com www.terexcranes.com Brochure Reference: TC-DS-I-E-Crossover 8000-07/14