I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r e i n d u s t r i e s. c o m
Filling industry's needs for pipe hangers, supports, strut, custom fabrication and metal stampings. Stocking stainless steel hangers, strut and accessories in Type 304 and Type 316. Offering same day shipping for truck and air freight shipments. Shipping material packaged and tagged per the customer's instructions. Offering order transactions via EDI technology. Coatings and finishes include: Electro-galvanizing (EG) Hot dip galvanizing (HDG) Copper plating (CT) Chrome plating (CR) Plastic coating (PC) Red primer painting (RP) Epoxy Coating (EC) Copper-Gard (CG) Current list price discount: Multiplier: Local Sales Representative: Factory contact: USA 800-243-4844 Local 860-647-1431 Fax 860-647-1160
TERMS OF SALE AGREEMENTS: All agreements are subject to strikes, accidents or other causes beyond our control. Prices and designs are subject to change without notice. TAXES: The buyer is liable for any Federal or State taxes imposed on the seller. WARRANTY: We guarantee to replace, or at our option, to repair any material which we find in our sole discretion to be defective in material or workmanship provided that a claim and proof thereof is made in writing to us within thirty (30) days after purchaser's receipt thereof. In no event shall we be liable for transportation to or from our factory, installation, adjustments or any expenses or damages which may arise in loss of use, and the foregoing shall be the purchaser's sole remedy hereunder. No other warranty or guarantee of any kind is made, express or implied. Products sold but not manufactured by Empire are not warranted by Empire; however, to the extent possible, Empire will pass through to the purchaser any supplier's warranty. CLAIMS: No claims for shortages allowed unless made in writing within ten (10) days of goods. All material sent out will be carefully counted and packed. Claims for goods damaged or lost in transit should be made on the carrier as our responsibility ceases on delivery to the carrier. LIABILITY FOR MISUSE: We shall not be liable for damages to property or persons due to improper installation of our material or through attempts to utilize the material under conditions which exceed the designed capabilities. Purchaser agrees to indemnify and hold us harmless from any and all claims, liabilities, damages, costs, and expenses asserted against us or incurred by us because of injuries to persons or damages to property resulting from the improper installations or misuse of the material. RETURNS: Permission to return standard stocked merchandise must be obtained in writing. Credit will be issued subject to the following: 1. Return freight charges must be prepaid. 2. All material must be in first-class condition on arrival at our plant; if not, reconditioning costs will deducted from the credit memo. 3. Return good authorizations (RGA s) will require a signed, authorized RGA form from the the party returning the material. Any terms that deviate from the signed RGA form will be deducted from the credit, or shipment may be refused. 4. Credit will be allowed on the basis of the price charged less a minimum handling charge of 25%, and less any out-bound freight allowed or paid by us. SPECIAL ORDERS: Orders quoted special with non-standard material are not subject to cancellation or return unless such terms are agreed upon. MINIMUM INVOICE: $50.00 plus transportation. TERMS: 1% 15 days - Net 30 days. INTEREST CHARGE: Any amount not paid timely by the customer shall bear interest at the maximum rate permitted by law, not to exceed 1 1/2% per month. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. Full freight allowed orders are negotiated on a regional basis. Contact your local manufacturers representative or the factory direct. PROTECTIVE COATINGS: NET PRICE/CWT Hot Dip Galvanizing $90.00 (Minimum charges by piece or Electro-galvanizing (Zinc and Copper) $80.00 by weight may apply for Painting (Red Primer - one coat) $80.00 all coatings)
Version 122009-1- 11 11CI ADJUSTABLE CLEVIS HANGER Ordering: Specify pipe size, figure number and finish Note: Specify EG for (Electro-Galvanized) or HDG for (Hot Dip Galvanized) when ordering product UL approved on sizes 2-1/2-8. FM approved on sizes 3/4-8 Pipe Price/Each Std. Wgt./ Pipe Price/Ea c h Std. Wgt./ Size Plain E G HDG Pkg. Each Size Plain E G HDG Pkg. Each 1/2 2.15 2.75 4.35 100 0.180 6 14.95 22.95 33.05 10 2.80 3/4 2.20 2.80 4.40 100 0.180 7 24.20 37.90 46.00 10 3.24 1 2.25 2.90 4.65 100 0.220 8 22.35 35.35 51.25 10 4.46 1 1/4 2.50 3.45 5.35 100 0.260 10 44.30 61.40 94.55 Bulk 8.06 1 1/2 2.70 3.85 5.95 100 0.340 12 54.45 79.05 122.35 Bulk 10.34 2 3.05 4.40 6.75 50 0.380 14 98.60 118.95 POA Bulk 14.80 2 1/2 5.20 8.30 12.20 50 0.860 16 128.90 166.30 POA Bulk 21.00 3 6.25 9.55 14.55 25 0.960 18 181.65 215.60 POA Bulk 24.40 3 1/2 7.55 11.90 16.95 25 1.140 20 343.85 415.55 POA Bulk 47.00 4 7.70 11.65 18.30 25 1.200 24 510.00 678.00 POA Bulk 54.00 5 11.10 16.95 25.50 25 2.040 30 719.00 883.95 POA Bulk 69.50 CLEVIS HANGER FOR DUCTILE IRON and PVC C-900 PIPE Ordering: Specify pipe size, figure number and finish Note: Also available in 304 and 316 stainless steel *SEE PAGE 30 FOR LIGHTWEIGHT CLEVIS #110 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain HDG Pkg. Each Size Plain E G HDG Pkg. Each 3 19.00 30.60 25 1.14 14 267.80 POA POA Bulk 17.57 4 22.74 36.55 25 1.32 16 354.00 POA POA Bulk 25.38 6 34.64 55.70 25 2.86 18 475.40 POA POA Bulk 47.00 8 55.25 88.10 10 4.56 20 978.00 POA POA Bulk 50.50 10 102.30 164.00 Bulk 8.70 24 1699.00 POA POA Bulk 58.00 12 173.85 279.20 Bulk 11.08 11GI ADJUSTABLE CLEVIS HANGER Material: Electro-galvanized carbon steel - Imported Ordering: Specify pipe size, figure number Note: UL approved on sizes 2-1/2-4. FM approved on sizes 3/4-4 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/2 2.40 100 0.180 2 3.90 50 0.380 3/4 2.45 100 0.180 2 1/2 6.60 50 0.860 1 2.50 100 0.220 3 8.20 25 0.960 1 1/4 2.90 100 0.260 4 10.35 25 1.260 1 1/2 3.25 100 0.340
- 2- Version 122009 11F CLEVIS HANGER, FLAT TOP Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 2 17.05 50 0.46 5 32.55 25 2.08 2 1/2 20.75 50 0.78 6 40.90 10 2.82 3 21.25 25 0.98 8 56.05 10 4.34 3 1/2 39.90 25 1.36 4 24.80 25 1.38 11SS-TYPE 304 11SX-TYPE 316 CLEVIS HANGER STAINLESS STEEL Material: Ordering: Note: Stainless steel Specify pipe size and stainless steel type Larger pipe sizes are PRICED ON APPLICATION Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size T-304 T-316 Each Size T-304 T-316 Each 1/2 20.05 25.20 0.18 4 99.65 129.95 1.26 3/4 21.70 27.15 0.18 5 151.75 193.75 2.04 1 22.95 29.10 0.22 6 188.30 234.70 3.24 1 1/4 24.90 31.00 0.26 8 270.10 362.25 4.46 1 1/2 28.00 34.60 0.34 10 492.95 642.90 8.06 2 32.15 40.90 0.38 12 625.45 812.00 10.34 2 1/2 61.00 75.80 0.86 14 685.00 994.00 14.65 3 73.05 94.95 0.96 16 1120.00 1624.00 21.60 11V CLEVIS HANGER, V-BOTTOM Ordering: Specify size number and figure number Size Pipe Price/Each Wgt./ No. Size Plain E G Each 1 1/2-2 7.20 9.25 0.30 2 2 1/2-4 15.70 21.50 0.96
Version 122009-3- 11WS CLEVIS HANGER WITH WELDED SHIELD Material: Ordering: Note: Carbon steel with welded galvanized shield Specify hanger size and figure number To calculate proper size, add the thickness of the insulation times 2, plus the O.D. of the pipe Hanger Price/Each Shield Wgt./ Hanger Price/Each Shield Wgt./ Size Plain I.D. Each Size Plain I.D. Each 1 1/2 29.60 1 7/8 0.80 8 104.70 8 5/8 6.30 2 31.00 2 3/8 1.10 10 178.85 10 3/4 10.00 2 1/2 36.40 2 7/8 1.30 12 203.55 12 3/4 13.80 3 40.80 3 1/2 1.80 14 248.15 14 17.90 3 1/2 48.00 4 2.00 16 292.95 16 24.20 4 49.80 4 1/2 2.60 18 324.05 18 30.00 5 58.05 5 5/8 3.20 20 540.35 19 47.00 6 69.05 6 5/8 4.20 24 1037.60 21 54.00 7 96.25 7 5/8 6.00 11X CLEVIS HANGER with EXTENDED BOTTOM Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 1/2 14.80 50 0.30 3 24.50 20 1.34 3/4 14.90 50 0.33 4 31.00 10 1.92 1 15.00 50 0.34 5 42.10 10 2.58 1 1/4 15.40 50 0.39 6 56.25 10 3.36 1 1/2 16.00 25 0.47 8 88.15 10 5.08 2 18.60 25 0.65 10 125.40 Bulk 9.08 2 1/2 22.70 25 1.24 12 154.50 Bulk 11.54 12 V-SUPPORT TROUGH Material: Pregalvanized carbon steel (10 lengths) Ordering: Specify size number and figure number Size Pipe Price/Each Wgt./ No. Size E G Each 1 1/2-2 70.30 5.40 2 2 1/2-4 126.00 10.80
- 4- Version 122009 13 WELDLESS EYE NUT Material: Forged steel Ordering: Specify rod size, figure number and finish Note: Specify figure number 13-L for left-hand thread Stainless steel also available and priced on application Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 POA POA 100 0.23 1 POA POA 10 1.7 1/2 POA POA 100 0.55 1 1/8 POA POA 10 3.7 5/8 POA POA 50 0.52 1 1/4 POA POA 5 3.5 3/4 POA POA 50 1.70 1 1/2 POA POA 5 3.5 7/8 POA POA 10 1.70 1 3/4 POA POA Bulk 16.4 13 I WELDLESS EYE NUT Material: Forged steel-imported Ordering: Specify rod size, figure number and finish Note: Hot dip galvanized eye nuts are not tapped oversized Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain HDG Pkg. Each Size Plain HDG Pkg. Each 3/8 20.70 26.80 100 0.23 1 48.50 61.50 10 1.70 1/2 20.70 26.80 100 0.55 1 1/8 142.00 181.25 10 3.70 5/8 25.60 31.30 50 0.52 1 1/4 142.00 181.25 5 3.50 3/4 25.60 31.30 50 1.70 1 1/2 150.00 186.75 5 3.50 7/8 48.50 61.50 10 1.70 21 C-CLAMP Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY 3/8, 1/2 Note: FM approved 3/8 ONLY Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 3.95 5.25 100 0.38 3/4 13.70 16.75 50 0.60 1/2 4.15 5.95 100 0.38 7/8 51.60 66.60 25 1.76 5/8 8.60 11.35 50 0.56
Version 122009-5- 21L C-CLAMP with LOCKNUT Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY 3/8, 1/2 Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.) FM approved on size 3/8 Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 4.30 5.35 100 0.40 3/4 15.20 18.70 50 0.68 1/2 4.50 6.40 100 0.40 7/8 57.00 72.70 25 1.88 5/8 11.80 14.40 50 0.60 21LI C-CLAMP with LOCKNUT Material: Electro-Galvanized, carbon steel-imported Ordering: Specify rod size, figure number FULL CARTON QUANTITIES ONLY 3/8, 1/2 Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.) FM approved on size 3/8 Size E G Std. Pkg. Wgt/Each 3/8 4.80 100 0.40 1/2 5.75 100 0.40 5/8 12.95 50 0.60 3/4 16.80 50 0.68 21LSS-Type 304 21LSX-Type 316 C-CLAMP with LOCKNUT, STAINLESS STEEL Material: Stainless steel Ordering: Specify rod size, figure number and stainless steel type Size Price Each Std. Wgt./ Size Price Each Std. Wgt./ T-304 T-316 Pkg. Each T-304 T-316 Pkg. Each 3/8 28.45 36.15 100 0.40 5/8 66.25 -- 50 0.60 1/2 29.95 38.20 100 0.40 3/4 106.45 -- 50 0.68
- 6- Version 122009 21R C-CLAMP RETAINING STRAP Ordering: Specify length and figure number Note: Use with figure numbers 21L, 3/8-3/4 and 23L, 3/8 and 1/2 Size Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E.G Pkg. Each Plain E.G Pkg. Each 4 1/2 4.35 5.70 100 0.22 10 4.55 6.00 100 0.44 6 4.40 5.75 100 0.30 12 5.35 6.75 100 0.48 8 4.45 5.90 100 0.36 14 6.50 8.35 100 0.66 22R BEAM CLAMP RETAINING STRAP Ordering: Specify rod size, length and figure number Note: Use with figure numbers 61 and 62; 3/8 and 1/2 rod sizes are supplied on the same strap 23L Length Inches DUCTILE IRON C-CLAMP with LOCKNUT Material: Ductile iron Ordering: Specify rod size, figure number and finish Note: UL listed and FM approved on sizes 3/8 and 1/2 Price Each - Plain 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod 7/8 Rod 4 1/2 3.40 3.40 4.20 4.25 4.40 6 3.60 3.60 4.40 4.45 4.60 8 3.80 3.80 4.75 4.80 5.10 10 4.30 4.30 5.00 5.15 5.75 12 4.90 4.90 5.85 5.90 6.25 14 5.65 5.65 6.60 6.40 8.40 Price/Each Size Plain E G Std. Pkg. Wgt./Each 3/8 3.85 6.05 100 0.40 1/2 4.95 6.50 100 0.39 5/8 7.75 12.75 50 0.65 3/4 10.55 16.60 50 0.76 24 PURLIN CLAMP Material: Ductile iron Ordering: Specify rod size, figure number and finish Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 20.15 24.50 20 0.92
Version 122009-7- 25L EXTENDED C-CLAMP with LOCKNUT Material: Malleable iron Ordering: Specify rod size, figure number and finish Price/ Std. Wgt./ Size Rod Each Pkg. Each 1 3/8 31.80 50 0.716 26 Material: Ordering: Note: PLAIN EYE RODS, RIGHT HAND THREAD Carbon steel Specify rod size, length and figure number Eyerods are made to order -- minimum order to be $40.00 net per size Specify figure #26-L for left hand thread - Priced on application (Inches) 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod 7/8 Rod 1 Rod 8-72 PRICE ON APPLICATION 26W Material: Ordering: Note: WELDED EYE RODS, RIGHT HAND THREAD Carbon steel Specify rod size, length and figure number Eyerods are made to order -- minimum order to be $40.00 net per size Specify figure #26-WL for left hand thread - Priced on application Length List Price Each (Inches) 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod 7/8 Rod 1 Rod 8-72 PRICE ON APPLICATION 31 ADJUSTABLE BAND HANGER Ordering: Specify pipe size, figure number and finish Note: If plastic coated hanger is needed order figure #31PC Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G PC Pkg. Each Size Plain E G PC Pkg. Each 3/8 1.40 2.10 7.30 100 0.10 2 1/2 3.15 5.25 12.20 50 0.28 1/2 1.43 2.10 7.30 100 0.10 3 3.35 5.90 13.40 50 0.38 3/4 1.45 2.15 7.45 100 0.10 3 1/2 4.90 8.30 20.45 50 0.42 1 1.46 2.45 7.75 100 0.12 4 5.00 8.35 20.55 50 0.60 1 1/4 1.47 2.65 8.10 100 0.12 5 5.75 10.45 28.30 Bulk 0.70 1 1/2 1.54 2.95 8.35 100 0.14 6 9.90 17.00 39.85 Bulk 1.34 2 1.63 3.50 10.50 100 0.16 8 15.95 26.85 57.75 Bulk 1.64
- 8- Version 122009 31CT Material: Copper plated carbon steel Ordering: Specify tube size, figure number and finish COPPER TUBING ADJUSTABLE BAND HANGER Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/2 1.95 100 0.10 2 1/2 5.00 50 0.30 3/4 2.00 100 0.10 3 5.20 50 0.32 1 2.05 100 0.10 3 1/2 9.20 50 0.38 1 1/4 2.20 100 0.12 4 9.25 50 0.44 1 1/2 2.30 100 0.12 5 13.95 25 0.68 2 2.40 100 0.14 6 17.00 25 0.84 31CTI COPPER-GARD COPPER TUBING ADJUSTABLE BAND HANGER Material: Epoxy coated over electro-galvanized carbon steel - Imported Ordering: Specify tube size, figure number and finish Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/2 1.40 100 0.10 2 1/2 3.25 50 0.30 3/4 1.45 100 0.10 3 3.50 50 0.32 1 1.50 100 0.10 3 1/2 7.60 50 0.38 1 1/4 1.70 100 0.12 4 8.00 50 0.44 1 1/2 1.80 100 0.12 5 11.00 25 0.68 2 1.95 100 0.14 6 13.50 25 0.84 31SS Material: Ordering: Note: ADJUSTABLE BAND HANGER, STAINLESS STEEL TYPE 304 Stainless steel Specify pipe size and figure number Type 316 also available - Priced on application Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Type 304 Pkg. Each Size Type 304 Pkg. Each 1/2 13.60 100 0.10 2 1/2 30.65 50 0.28 3/4 13.80 100 0.10 3 32.05 50 0.38 1 14.60 100 0.10 4 37.75 50 0.60 1 1/4 15.60 100 0.12 5 46.20 Bulk 0.70 1 1/2 16.90 100 0.12 6 75.10 Bulk 1.34 2 18.30 100 0.14 8 89.55 Bulk 1.64
Version 122009-9- 34 VIBRATION HANGER: NEOPRENE-IN-SHEAR HANGER Ordering: Specify load, rod size and figure number PRICED ON APPLICATION 35 Ordering: VIBRATION HANGER : SPRING HANGER SERIES SH SPRING FLEX HANGERS Specify load, rod size and figure number PRICE ON APPLICATION 36 VIBRATION HANGER : SPRING HANGER SERIES RSH SPRING FLEX HANGERS Ordering: Specify load, rod size and figure number PRICED ON APPLICATION 37 Material: Electro-galvanized carbon steel Ordering: Specify pipe size, figure number and finish U-BOLTS, LIGHT DUTY LESS NUTS Pipe Rod Price/Ea. Std. Wgt./ Pipe Rod Price/Ea. Std. Wgt./ Size Size E G Pkg. Each Size Size E G Pkg. Each 1/2 1/4 2.95 100 0.04 3 3/8 6.55 50 0.32 3/4 1/4 3.05 100 0.06 3 1/2 3/8 8.50 50 0.34 1 1/4 3.40 100 0.06 4 3/8 8.90 50 0.38 1 1/4 1/4 3.60 100 0.08 5 3/8 13.05 25 0.46 1 1/2 1/4 3.95 100 0.08 6 1/2 14.25 25 0.94 2 1/4 4.15 100 0.10 8 1/2 20.70 25 1.16 2 1/2 3/8 5.90 50 0.28
- 10 - Version 122009 41A HANGER FLANGE (Bolt Thread) Material: Malleable iron Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY ON 3/8 Note: Chrome plated also available - Priced on application Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 BT 2.10 2.50 100 0.18 1/2 BT 3.35 3.90 100 0.18 41ACT COPPER-GARD HANGER FLANGE Material: Epoxy coating over malleable iron Ordering: Specify rod size, figure number FULL CARTON QUANTITIES ONLY ON 3/8 Note: COPPER-GARD products offer far superior corrosion protection Rod Price/Each Std. Wgt./ Size Coated Pkg. Each 3/8 2.65 100 0.18 1/2 3.70 100 0.18 41ASB SOLID BRASS HANGER FLANGE Material: Solid brass Ordering: Specify rod size, figure number Note: Solid Brass offers superior corrosion protection Rod Price/Each Std. Wgt./ Size Brass Pkg. Each 3/8 13.80 100 0.19 41ASSI-Type 304 41ASXI-Type 316 HANGER FLANGE, STAINLESS STEEL Material: Ordering: Stainless steel Specify rod size and figure number and stainless steel type Rod Price/Each Std. Wgt./ Size T-304 T-316 Pkg. Each 3/8 32.00 39.00 100 0.18 1/2 35.00 44.00 100 0.18
Version 122009 41 SPLIT RING HANGER (Bolt Thread) - 11 - Material: Ordering: Note: Malleable iron Specify pipe size, figure number and finish Chrome plated also available - Priced on application Pipe P r i c e/e a c h Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 1/2 2.70 3.10 100 0.098 2 4.95 5.60 50 0.30 3/4 2.80 3.25 100 0.112 2 1/2 Hinge Only Hinge Only -- -- 1 2.90 3.35 100 0.147 3 Hinge Only Hinge Only -- -- 1 1/4 3.70 4.00 50 0.181 4 Hinge Only Hinge Only -- -- 1 1/2 4.20 4.70 50 0.214 41CT 41CTSB 41H Material: Ordering: COPPER-GARD, COPPER TUBING SPLIT RING HANGER Material: Epoxy coating over electro-galvanized malleable iron Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/2 2.55 100 0.087 2 4.45 50 0.229 3/4 2.60 100 0.096 2 1/2 Hinge Only -- -- 1 2.65 100 0.128 3 Hinge Only -- -- 1 1/4 3.15 50 0.141 4 Hinge Only -- -- 1 1/2 3.80 50 0.179 SOLID BRASS, COPPER TUBING SPLIT RING HANGER Material: Solid brass Ordering: Specify rod size, figure number Note: Solid Brass offers superior corrosion protection Tubing Price/Each Std. Wgt./ Size Brass Pkg. Each 1/2 12.40 100 0.09 3/4 13.10 100 0.11 1 14.15 100 0.13 SPLIT RING HANGER (Bolt Thread), HINGE DESIGN Malleable iron Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 2.70 3.10 100 0.084 1 1/2 4.20 4.70 50 0.214 1/2 2.70 3.10 100 0.098 2 4.95 5.60 50 0.299 3/4 2.80 3.25 100 0.112 2 1/2 13.20 16.45 25 0.583 1 2.90 3.35 100 0.147 3 18.30 19.50 25 0.713 1 1/4 3.70 4.00 50 0.181 4 23.15 25.75 25 1.019
- 12-41HCT COPPER-GARD, COPPER TUBING SPLIT RING HANGER, HINGE DESIGN Material: Epoxy coating over malleable iron Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Version 122009 41SSI-Type 304 41SXI-Type 316 47 Material: Ordering: 48 49PC Material: Ordering: Note: Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/4 2.70 100 0.073 1 1/2 3.80 50 0.172 3/8 2.70 100 0.080 2 4.45 50 0.233 1/2 2.55 100 0.084 2 1/2 12.35 25 0.449 3/4 2.60 100 0.106 3 15.00 25 0.663 1 2.65 100 0.122 4 21.00 25 0.753 1 1/4 3.15 50 0.152 Malleable iron Specify rod size, figure number and finish Carbon steel Specify pipe size, figure number and finish If plastic coated hanger is needed order #49PC SPLIT RING HANGER, STAINLESS STEEL Material: Stainless steel Ordering: Specify pipe size, figure number and stainless steel type Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size T-304 T-316 Pkg. Each Size T-304 T-316 Pkg. Each 3/8 40.00 46.80 100 0.084 1 1/2 53.75 61.10 50 0.214 1/2 41.25 48.10 100 0.098 2 70.00 85.80 50 0.300 3/4 42.50 49.40 100 0.112 2 1/2 150.00 176.80 50 0.580 1 46.25 53.30 100 0.147 3 171.25 197.60 50 0.720 1 1/4 51.25 58.50 100 0.181 4 181.25 209.30 50 1.020 EYE SOCKET Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 1/4 2.20 2.45 100 0.05 5/8 4.25 6.25 50 0.22 3/8 2.35 2.60 100 0.07 3/4 7.25 9.25 50 0.32 1/2 2.85 3.25 100 0.14 7/8 15.00 18.00 50 0.53 PLASTIC PIPE RISER CLAMP PLASTIC RISER CLAMP, PLASTIC COATED #48 PLASTIC PIPE RISER CLAMP #49-PC PLASTIC RISER CLAMP, PLASTIC COATED Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plastic Pkg. Each 1 1/2 6.30 8.45 50 0.56 1 1/2 17.05 50 0.57 2 6.60 8.70 50 0.60 2 18.10 50 0.68 3 7.70 9.75 50 0.80 3 19.95 50 0.89 4 8.20 12.00 50 0.98 4 24.80 50 1.00
Version 122009-13 - TM Material: Ordering: UV stabilized 6/6 nylon. STRUT-N-ROD - Used for STRUT or THREADED ROD applications. Indicate by selecting part number in far left column followed by P for 3/8 threads of E for 1/4 threads. HANDY-SNAP - Used for surface mounting applications. Indicate by selecting part number in far left column followed by HS for HANDY-SNAP. Strut-N-Rod Box Handy Snap Steel-Plastic Copper Types Refrigeration Electric Electric Electric Stainless Max. Hanger No. E or P Qty HS Sch. 40 & 80 K, L, M & DWV Copper EMT Heavy Wall IMC Steel Tube Load Price Each Price Each 12-16 3.88 100 2.52 17-20 4.03 100 2.60 21-24 4.14 100 2.93 25-29 4.40 100 3.27 30-34 4.60 100 3.30 35-38 4.94 100 3.45 40-44 5.43 100 3.64 48-54 6.15 50 4.23 56-63 6.78 50 4.93 66-76 8.36 50 5.77 79-93 33.93 20 32.87 101-115 55.74 10 54.09 1/4" 3/8" -1/2 " 1/2" - 5/8" 1/2" 0.54.500 -.625.500 -.625.500 3/8" 5/8" 3/4" 1/2" 3/4" 0.675 0.75 0.75 0.706 0.75 1/2" 3/4" 7/8" 3/4" 1/2" 1/2" 0.84 0.875 0.875 0.922 0.84.815 3/4" 1" 1-1/8" 3/4" 3/4" 1" 1.05 1.125 1.125 1.05 1.029 1 1" 1" 1" 1" 1-1/4" 1.315 1.163 1.315 1.29 1.25 1 1/4" 1-3/8" 1-1/4" 1-1/2" 1.375 1.375 1.51 1.5 1-1/4" 1-1/2" 1-5/8" 1-1/2" 1-1/4" 1-1/4" 1.66 1.625 1.625 1.74 1.66 1.638 1-1/2" 2" 2-1/8" 1-1/2" 1-1/2" 2" 1.9 2.125 2.125 1.9 1.883 2 2" 2" 2" 2" 2-1/2" 2.375 2.197 2.375 2.36 2.5 2-1/2" 2-1/2" 2-5/8" 2-1/2" 2-1/2" 2-1/2" 3" 2.875 2.625 2.625 2.875 2.875 2.857 3 3" 3-3 ½" 3-3 ½" 3" 3" 3" 3 ½" 3.5 3.125-3.625 3.125-3.625 3.5 3.5 3.476 3.5 3 1/2-4" 4" 4" 4" 4" 4" 4" 4.000-4.500 4.125 4.125 4.5 4.5 4.466 4 170 195 215 315 320 342 365 380 410 500 600 950
- 14-50 RISER CLAMP Ordering: Specify pipe size, figure number and finish Note: UL approved on sizes 2-8 Version 122009 Pipe P r i c e / E a c h Std. Wgt/ Size Plain E G HDG Pkg Each 1/2 6.85 9.70 13.25 50 0.88 3/4 6.85 9.70 13.30 50 0.92 1 6.90 9.75 13.45 50 0.94 1 1/4 8.40 11.05 16.00 50 1.00 1 1/2 8.85 11.45 16.60 50 1.04 2 9.00 11.60 17.15 50 1.14 2 1/2 10.25 14.90 21.50 25 1.60 3 10.60 15.90 22.90 25 1.70 3 1/2 14.85 23.40 30.40 25 2.06 4 13.40 21.95 28.20 25 2.20 5 19.65 30.40 41.60 10 3.40 6 22.35 32.75 45.15 10 3.72 8 44.70 66.55 81.65 Bulk 7.22 10 61.20 89.70 130.90 Bulk 10.94 12 100.75 200.95 POA Bulk 16.10 14 138.90 229.60 POA Bulk 17.00 16 252.00 400.95 POA Bulk 29.16 18 286.75 445.75 POA Bulk 31.91 20 342.75 506.25 POA Bulk 35.00 24 442.40 773.95 POA Bulk 48.00 50CT RISER CLAMP, COPPER TUBING Material: Ordering: Copper plated carbon steel Specify tube size and figure number Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/2 8.05 50 0.48 2 1/2 15.20 25 1.08 3/4 8.15 50 0.50 3 16.60 25 1.16 1 9.10 50 0.64 3 1/2 25.10 25 1.58 1 1/4 10.15 50 0.66 4 24.65 25 1.66 1 1/2 11.25 50 0.68 5 47.85 10 3.42 2 13.55 50 1.06 6 51.45 10 3.76
Version 122009-15 - 50CTI COPPER-GARD, COPPER TUBING RISER CLAMP Material: Epoxy coating over carbon steel - Imported Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/2 6.90 50 0.48 2 1/2 14.05 25 1.08 3/4 6.95 50 0.50 3 15.95 25 1.16 1 7.65 50 0.64 3 1/2 21.45 25 1.58 1 1/4 8.85 50 0.66 4 24.50 25 1.66 1 1/2 10.20 50 0.68 5 37.55 10 3.42 2 11.95 25 1.06 6 40.45 10 3.76 50PC RISER CLAMP, PLASTIC COATED Material: Plastic coated carbon steel Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plastic Coated Each Size Plastic Coated Each 1/2 23.00 1.10 2 1/2 34.10 1.90 3/4 23.00 1.10 3 36.60 1.90 1 23.50 1.10 4 46.25 2.40 1 1/4 26.20 1.60 5 69.80 3.60 1 1/2 27.45 1.60 6 78.00 4.00 2 27.75 1.70 8 159.00 7.60
- 16 - Version 122009 50SA RISER CLAMP, SHORT ARM Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 3/4 11.80 100 0.43 3 14.15 25 1.18 1 11.80 100 0.50 3 1/2 16.75 25 1.30 1 1/4 12.00 50 0.58 4 16.75 25 1.54 1 1/2 12.20 50 0.60 5 29.00 15 2.64 2 12.45 50 0.60 6 32.10 15 2.80 2 1/2 13.95 25 1.12 50SS-Type 304 50SX-Type 316 RISER CLAMP, STAINLESS STEEL Material: Stainless steel Ordering: Specify pipe size, figure number and stainless steel type Note: Larger sizes are available - Priced on application. Sizes 4, 6, 8, 10 and 12 can be used on SDR 35 sewer pipe. Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size T-304 T-316 Each Size T-304 T-316 Each 1/2 52.95 74.15 0.88 3 94.50 122.75 1.70 3/4 55.65 77.90 0.92 4 108.45 142.60 2.20 1 58.75 82.25 0.94 5 172.85 242.00 3.40 1 1/4 63.50 88.90 1.00 6 179.90 251.80 3.72 1 1/2 66.15 92.60 1.04 8 327.75 458.85 7.22 2 72.00 100.80 1.14 10 534.00 747.00 10.94 2 1/2 92.00 119.80 1.60 12 1,093.25 POA 16.10 51 ROD COUPLING Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY ON SIZES 3/8 and 1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 1/4 -- 1.95 100 0.08 7/8 21.75 24.50 15 0.55 3/8 1.95 2.10 50 0.11 1 25.90 28.50 Bulk 0.71 1/2 2.20 2.60 50 0.10 1 1/8 44.20 46.35 Bulk 0.86 5/8 4.40 5.50 25 0.18 1 1/4 50.60 55.45 Bulk 0.95 3/4 6.90 8.05 20 0.28 1 1/2 83.10 113.70 Bulk 1.88
Version 122009-17 - 51R REDUCING ROD COUPLING Material: Electro-galvanized carbon steel Ordering: Specify rod size and figure number Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 3/8 x 1/4 8.80 100 0.04 3/4 x 5/8 15.75 100 0.21 1/2 x 3/8 9.25 100 0.07 7/8 x 3/4 26.25 50 0.40 5/8 x 1/2 11.05 100 0.14 1 x 7/8 49.00 50 0.55 51SS ROD COUPLING, STAINLESS STEEL TYPE 304 Material: Stainless steel Ordering: Specify rod size and figure number Rod Price Wgt./ Rod Price Wgt./ Size Each Each Size Each Each 1/4 11.40 0.03 3/4 65.95 0.31 3/8 11.50 0.04 7/8 119.90 0.58 1/2 17.00 0.06 1 130.30 0.73 5/8 38.90 0.18 52 ROUND STEEL WASHER Ordering: Specify pipe size, figure number and finish FULL CARTON QUANTITIES ONLY ON SIZES 1/4-3/4 Size Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Plain E G Pkg. Each 1/4 0.18 0.22 100 0.01 7/8 1.90 2.40 15 0.15 3/8 0.23 0.28 100 0.02 1 3.60 4.10 25 0.19 1/2 0.41 0.48 50 0.04 1 1/8 4.10 4.75 25 0.22 5/8 0.85 1.18 25 0.08 1 1/4 4.30 5.20 50 0.26 3/4 1.38 1.78 20 0.11 1 1/2 6.15 7.50 50 0.39 52 BULK BULK FLAT ROUND WASHERS IN 50 LB BOXES Ordering: Specify rod size, figure number and finish Bolt Price/Each Box Std. Bolt Price/Each Box Std. Size Plain E G Pkg. Size Plain E G Pkg. 1/4 374.00 425.00 7450 3/4 426.00 476.00 455 3/8 362.00 400.00 3350 7/8 428.00 496.00 325 1/2 383.00 434.00 1300 1 433.00 493.00 265 5/8 376.00 443.00 650
- 18-52F FENDER WASHERS Version 122009 Material: Electro-galvanized carbon steel Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY ON ALL SIZES 52L Size Outside Price/ Std. Wgt./ Diameter Each Pkg. Each 1/4 1 1/2 0.75 100 0.03 3/8 1 1/2 0.85 100 0.03 1/2 2 1.15 50 0.05 Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY Size LOCK WASHERS Price/Each Std. Wgt./ Plain E G Pkg. Each 3/8 0.70 1.00 100 0.01 1/2 0.80 1.30 100 0.01 5/8 1.10 1.70 100 0.02 3/4 1.45 2.20 100 0.04 52SS Material: Stainless steel Ordering: Specify rod size and figure number ROUND STEEL WASHER, STAINLESS STEEL TYPE 304 Rod Price/ Std. Wgt./ Rod Price/ Std. Wgt./ Size Each Pkg. Each Size Each Pkg. Each 3/8 0.85 100 0.01 3/4 3.10 50 0.11 1/2 1.70 100 0.04 7/8 6.60 25 0.15 5/8 2.50 50 0.07 53 ANGLE BRACKET Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITY ON 3/8 and 1/2 Note: Also available in statinless steel Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 3.30 3.75 100 0.225 1/2 4.05 5.25 100 0.330 5/8 15.40 20.65 20 1.130 3/4 17.40 23.20 20 1.390 7/8 19.40 24.65 20 1.400
Version 122009 54 CONTINUOUS THREADED ROD - 19 - Ordering: Specify rod size, figure number and finish FULL BUNDLE QUANTITIES ONLY ON SIZES 3/8-3/4 Note: Also available in 10 or 12 lengths Left hand thread, SAE fine thread and B-7 priced on application Rod Price/Ft. Bundle Wgt./ Rod Price/Ft. Wgt./ Size Plain E G Quantities Foot Size Plain E G Foot 1/4-20 1.03 1.39 50 0.12 7/8-9 13.20 16.40 1.70 3/8-16 1.38 1.67 25 0.29 1-8 18.65 21.70 2.23 1/2-13 2.58 3.35 15 0.54 1 1/8-7 24.75 29.00 2.81 5/8-11 4.43 5.38 9 0.85 1 1/4-7 29.65 36.50 3.54 3/4-10 6.33 8.53 6 1.25 1 1/2-6 45.90 56.05 5.12 54SS CONTINUOUS THREADED ROD STAINLESS STEEL TYPE 304 Material: Stainless steel Ordering: Specify rod size and figure number Note: Also available in 10 or 12 lengths and Type 316 - Priced on application Rod Price/Ft. Wgt./ Rod Price/Ft. Wgt./ Size T-304 Foot Size T-304 Foot 1/4-20 4.50 0.12 3/4-10 38.20 1.25 3/8-16 9.50 0.29 7/8-9 60.75 1.70 1/2-13 16.50 0.54 1-8 70.65 2.23 5/8-11 28.00 0.85 55 COACH SCREW ROD Ordering: Specify rod size, length, figure number and finish FULL CARTON QUANTITIES ONLY Rod Price/Each Std Wgt./ Rod Price/Each Std Wgt./ Size Plain E. G. Pkg. Each Size Plain E. G. Pkg. Each 1/4 x 3 1/2 1.95 2.40 100 0.04 3/8 x 12 4.95 6.75 25 0.29 3/8 x 3 1/2 1.85 3.15 50 0.08 1/2 x 4 3.90 6.50 25 0.14 3/8 x 4 1/2 2.25 3.60 50 0.11 1/2 x 6 4.50 6.95 25 0.21 3/8 x 6 2.55 4.30 25 0.14 1/2 x 8 9.45 11.00 25 0.22 3/8 x 8 3.15 4.90 25 0.19 5/8 x 4 9.40 13.40 25 0.24 3/8 x 10 4.35 6.15 25 0.23
- 20 - Version 122009 56 Ordering: Specify rod size, figure number and finish FULL BOX QUANTITIES ONLY STANDARD HEX NUT, PACKAGED Size Price/Each Std. Wgt./ Size Price/Each Std. Wgt./ Plain E G Pkg. Each Plain E G Pkg. Each 1/4 0.23 0.28 100 0.01 7/8 2.50 3.20 15 0.19 3/8 0.27 0.33 100 0.01 1 3.95 4.70 10 0.28 1/2 0.56 0.63 50 0.03 1 1/8 8.20 10.00 10 0.40 5/8 1.11 1.60 25 0.07 1 1/4 9.30 11.35 5 0.54 3/4 1.64 2.35 20 0.11 1 1/2 15.20 16.00 10 0.94 56 BULK STANDARD HEX NUT (FULL KEGS ONLY) Ordering: Specify rod size, figure number and finish FULL KEG QUANTITIES ONLY (Keg quantities subject to change) Size Price/Each Keg Std. Wgt./ Size Price/Each Keg Std. Wgt./ Plain E G Pkg./Keg Keg Plain Plated Pkg./Keg Keg 1/4 525.00 550.00 9000 148 3/4 500.00 590.00 500 180 3/8 490.00 549.00 4000 136 7/8 455.00 545.00 300 180 1/2 510.00 620.00 1800 190 1 425.00 455.00 190 203 5/8 425.00 520.00 800 183 56H HEAVY HEX NUTS, PACKAGED Ordering: Specify rod size, figure number and finish FULL BOX QUANTITIES ONLY Size Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Plain E G Pkg. Each 1/4 0.31 0.34 100 0.01 7/8 4.20 5.15 15 0.30 3/8 0.40 0.43 100 0.03 1 7.30 8.70 10 0.43 1/2 0.85 0.90 50 0.06 1 1/8 12.60 14.05 10 0.59 5/8 1.55 1.86 25 0.12 1 1/4 12.65 14.80 5 0.79 3/4 2.36 2.97 20 0.19 1 1/2 23.70 27.20 10 1.30
Version 122009-21 - 56H BULK HEAVY HEX NUTS (FULL KEGS ONLY) Ordering: Specify rod size, figure number and finish FULL KEG QUANTITIES ONLY (Keg quantities subject to change) Size Price/Each Keg Std. Wgt./ Price/Each Keg Std. Wgt./ Size Plain E G Pkg./Keg Each Plain E G Pkg./Keg Each 1/4 455.00 536.00 3750 180 3/4 423.00 480.00 250 190 3/8 482.00 550.00 2000 192 7/8 474.00 549.00 130 195 1/2 473.00 517.00 1000 217 1 606.00 713.00 125 215 5/8 444.00 509.00 450 216 56SS Material: Stainless steel Ordering: Specify rod size and figure number Size Price/Each STANDARD HEX NUTS, STAINLESS STEEL TYPE 304 Std. Wgt./ Size Price/Each Std. Wgt./ Pkg. Each Pkg. Each 3/8 0.90 100 0.01 3/4 4.65 50 0.11 1/2 1.80 100 0.03 7/8 6.95 25 0.19 5/8 2.85 50 0.07 57 Ordering: Specify rod size, length, figure number and finish HANGER ROD Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain Each Size Plain Each 3/8 x 8 0.20 1/2 x 8 0.25 3/8 x 10 Price 0.24 1/2 x 12 Price 0.52 3/8 x 12 On 0.29 1/2 x 18 On 0.73 3/8 x 18 Application 0.42 5/8 x 8 Application 0.54 3/8 x 24 0.54 5/8 x 12 0.81
- 22 - Version 122009 58 HEX HEAD FLANGE BOLTS, PACKAGED Ordering: Specify bolt diameter, length, figure number and finish Note: Other sizes also available - Priced on application Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 1 1/2 1.16 1.32 50 0.12 1 3/4 1.20 1.36 50 0.13 1/2 2 1.46 1.60 50 0.14 2 1/2 1.65 1.80 50 0.17 2 3/4 2.58 -- 50 0.15 3 2.35 2.60 50 0.20 Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 5/8 1 1/2 2.15 2.35 25 0.19 2 2.35 2.50 25 0.23 2 1/4 2.60 2.75 25 0.25 2 1/2 2.70 3.05 25 0.27 2 3/4 2.90 3.35 25 0.29 3 3.00 3.45 25 0.32 3 1/4 3.50 3.80 25 0.34 3 1/2 3.60 3.95 25 0.36 3 3/4 3.85 4.45 25 0.38 4 4.10 5.15 25 0.40 4 1/2 4.50 5.95 25 0.45 5 5.05 7.10 25 0.49 Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 3/4 Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 7/8 2 3.85 4.85 20 0.35 2 1/4 4.05 5.30 20 0.39 2 1/2 4.30 5.40 20 0.42 2 3/4 4.60 6.00 20 0.44 x 3 4.80 6.05 20 0.48 3 1/4 5.05 6.15 20 0.51 3 1/2 5.25 6.25 20 0.54 3 3/4 5.80 6.90 20 0.57 4 5.95 6.95 20 0.60 4 1/2 7.05 7.75 30 0.67 5 7.60 8.50 30 0.73 6 9.30 10.50 30 3 7.90 8.80 15 0.68 3 1/4 8.20 9.70 15 0.72 3 1/2 8.95 9.85 15 0.76 4 9.35 10.70 15 0.85 4 1/2 10.00 11.20 15 0.93 5 11.95 13.90 15 1.00 Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 1 3 10.15 13.25 10 0.91 3 1/2 11.00 14.00 10 1.00 4 12.65 15.00 10 1.10 4 1/2 14.20 17.50 10 1.20 5 18.30 21.00 10 1.30 58 BULK HEX HEAD FLANGE BOLTS, (FULL KEGS ONLY) Ordering: Specify bolt diameter, length, figure number and finish FULL KEG QUANTITIES ONLY. (Keg quantities subject to change) Note: Other sizes also available. Price on application Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 2 1/2 544.00 572.00 200 183 5/8 3 410.00-175 202 3 1/4 433.00 551.00 150 198 3 476.00-120 240 3/4 3 1/2 546.00 651.00 100 216 4-598.00 85 50
Version 122009-23 - 59 Ordering: Specify size, figure number and finish FULL CARTON QUANTITIES ONLY DRIVE SCREW 60 Size Material: Malleable Iron - electro-galvanized Ordering: Specify rod size and figure number FULL CARTON QUANTITIES ONLY Price/Each Std. Wgt./ Plain Pkg. Each #12 x 1 1/2 0.63 100 0.01 #14 x 1 1/2 0.74 100 0.01 #16 x 2 0.90 100 0.02 1/4 BEAM CLAMP 61 Rod Size Price/Each EG Std. Pkg. Wgt./Each 1/4 2.70 100 0.18 VOLUME PRICING Rod Size Volume Price/EG Volume Quanity Weight Each 1/4 2.50 1000 0.180 TOP BEAM CLAMP Material: Ductile iron Ordering: Specify rod size, figure number and finish Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.). FM approved on size 3/8. FULL CARTON QUANTITIES ONLY ON 3/8 AND 1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 4.60 5.35 100 0.40 5/8 11.30 14.65 50 0.66 1/2 6.15 7.95 100 0.40 3/4 14.00 17.75 50 0.83 61D Material: Malleable iron Ordering: Specify rod size, figure number and finish Note: UL and FM approved FULL CARTON QUANTITIES ONLY TOP BEAM CLAMP - DOMESTIC Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 8.00 9.80 100 0.55 1/2 8.20 17.00 100 0.56
- 24 - Version 122009 62 JUNIOR TOP BEAM CLAMP Material: Ductile iron Ordering: Specify rod size, figure number and finish Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.). FM approved on size 3/8. FULL CARTON QUANTITY ON 3/8-1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 2.70 3.40 100 0.320 3/4 10.35 14.15 50 0.820 1/2 3.95 5.30 100 0.320 7/8 12.50 17.80 50 0.795 5/8 6.90 10.55 50 0.580 VOLUME PRICING Rod Volume Volume Weight Size Price/Plain Quanity Each 3/8" 2.60 2000 0.320 3/8" 2.50 8000 (1 skid) 0.320 62D JUNIOR TOP BEAM CLAMP - DOMESTIC Material: Malleable iron Ordering: Specify rod size, figure number and finish Note: UL and FM approved FULL CARTON QUANTITIES ONLY Rod Price/ Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 4.85 7.35 100 0.32 1/2 6.35 10.35 100 0.32 62SS-Type 304 62SX-Type 316 JUNIOR TOP BEAM CLAMP STAINLESS STEEL Material: Stainless steel Ordering: Specify rod size and figure number and stainless steel type Rod Price/Each Std. Wgt./ Size T-304 T-316 Pkg. Each 1/4 43.50 50.30 100 0.34 3/8 43.50 50.30 100 0.34 1/2 49.85 57.85 100 0.33
Version 122009 63 ELECTRICAL ROD SUPPORT CLAMP - 25 - Material: Malleable iron - electro-galvanized Ordering: Specify rod size and figure number FULL CARTON QUANTITIES ONLY 66L 66W 67 Rod Price/Each Std. Wgt./ Size E G Pkg. Each 1/4 2.80 50 0.26 5/16 5.15 50 0.25 3/8 8.90 25 0.70 1/2 26.80 25 1.26 Rod Price/Each Std. Wgt./ Size E G Pkg. Each 1/4 2.50 1000 0.260 WELDING BEAM ATTACHMENT WELDING BEAM ATTACHMENT with BOLT and NUT Ordering: Specify rod size, figure number and finish Note: Also available in stainless steel Rod Price/Each Weight Size LESS Bolt & Nut WITH Bolt & Nut LESS Bolt & Nut WITH Bolt and Nut 3/8 17.50 21.50 0.835 1.05 1/2 17.50 21.50 0.790 1.15 5/8 18.65 23.95 0.770 1.35 3/4 22.10 36.55 1.640 2.56 7/8 30.25 46.15 2.240 3.60 1 59.35 89.00 4.270 6.29 1 1/8 77.10 128.00 4.100 7.10 1 1/4 134.65 250.50 8.090 10.22 1 1/2 251.00 425.05 15.600 19.02 Ordering: Specify rod size, figure number and finish VOLUME PRICING CONCRETE CLEVIS PLATE Rod Wgt./ Rod Wgt./ Price/Each Price/Each Size Each Size Each 3/8 POA 11.87 1 POA 37.01 1/2 POA 12.01 1 1/8 POA 37.90 5/8 POA 15.75 1 1/4 POA 40.72 3/4 POA 16.99 1 1/2 POA 60.00 7/8 POA 18.14
- 26 - Version 122009 68 CONCRETE ROD ATTACHMENT Ordering: Specify rod size, figure number and finish Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Each Size Each 3/8 POA 11.66 1 POA 34.99 1/2 POA 11.66 1 1/8 POA 35.22 5/8 POA 15.16 1 1/4 POA 38.81 3/4 POA 16.12 1 1/2 POA 56.40 7/8 POA 16.73 69 LONG 69 SHORT STRUCTURAL WELDING LUG Ordering: Specify rod size, short or long style, figure number and finish Size Price/Each Wgt./Each Std./ Short Long Short Long Pkg. 1/2 0.48 0.75 Bulk 5/8 POA POA 0.41 0.68 Bulk 3/4 0.60 1.00 Bulk 7/8 0.71 0.98 Bulk 1 POA POA 1.20 1.60 Bulk 1 1/4 3.00 3.70 Bulk 1 1/2 4.80 6.40 Bulk 72 BEVEL WASHER Ordering: Specify rod size, figure number and finish Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size E G Each Size E G Each 3/8 6.55 0.09 3/4 7.50 0.16 1/2 6.20 0.09 7/8 11.95 0.34 5/8 7.25 0.14
Version 122009-27 - 73 DROP-IN ANCHOR Material: Electro-galvanized carbon steel Ordering: Specify rod size and figure number FULL BOX QUANTITIES ONLYON SIZES 3/8 and 1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 3/8 2.00 50 0.06 5/8 9.30 25 0.32 1/2 3.00 50 0.12 3/4 20.60 10 0.48 74 HEX LAG SCREW Material: Electro-galvanized carbon steel Ordering: Specify diameter, length and figure number Length 1/4 Diameter 3/8 Diameter 1/2 Diameter 5/8 Diameter Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each 1 1/2 1.11 0.02 1.55 0.06 -- -- -- -- 2 1.30 0.03 1.90 0.07 2.70 0.14 6.30 0.23 2 1/2 1.50 0.03 2.05 0.08 3.00 0.16 6.50 0.27 3 1.85 0.04 2.40 0.10 3.45 0.19 7.10 0.31 4 2.10 0.05 2.70 0.12 3.95 0.23 7.65 0.38 75 STEEL WASHER Ordering: Specify rod size, figure number and finish 2 x 2 x 1/4 3 x 3 x 1/4 4 x 4 x 1/4 4 x 4 x 3/8 Rod Size Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each Plain Plain Plain Plain 3/8 3.60 0.26 6.10 0.64 9.75 1.15 14.35 1.72 1/2 3.60 0.26 6.10 0.64 9.75 1.15 14.35 1.72 5/8 -- -- 6.20 0.64 9.75 1.15 14.35 1.72 3/4 -- -- 6.50 0.64 10.00 1.10 14.65 1.71 7/8 -- -- 6.90 0.63 10.25 1.10 17.95 1.70 1 -- -- 7.10 0.63 10.50 1.06 15.20 1.70
- 28-77 ANCHOR BOLT Version 122009 Ordering: Specify rod size, length, and figure number Length 6 8 10 12 Price/Each 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod PRICED ON APPLICATION PRICED ON APPLICATION PRICED ON APPLICATION PRICED ON APPLICATION 80 Ordering: Specify rod size, length, and figure number Note: Priced on application WEDGE ANCHOR 81 CONCRETE INSERT Ordering: Specify figure number and finish Note: Nuts must be ordered separately by rod size INSERT BOX ONLY Price/Each Std. Wgt./ Plain E G Pkg. Each 8.05 9.90 45 0.61 NUTS Price/Each Std. Wgt./ NUTS Price/Each Std. Wgt./ ONLY Plain E G Pkg. Each ONLY Plain E G Pkg. Each 1/4 1.80 2.30 100 0.14 5/8 2.65 3.25 100 0.17 3/8 1.80 2.30 100 0.17 3/4 2.90 3.60 100 0.18 1/2 1.95 2.65 100 0.16 83 SPRING WING TOGGLE and BOLT Material: Electo-galvanized carbon steel Ordering: Specify size and figure number FULL BOX QUANTITIES ONLY Size Price/Each Std. Wgt./ Plated Pkg. Each 1/4 x 3 2.35 100 0.06 3/8 x 4 4.95 50 0.18
Version 122009-29 - 84 SPRING WING TOGGLE HEAD ONLY Material: Electo-galvanized carbon steel Ordering: Specify size and figure number FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Plated Pkg. Each 1/4 2.10 100 0.03 3/8 3.75 50 0.07 95 OFFSET PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel and Epoxy coated - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 3/4 70.85 1.28 3 87.35 2.50 1 71.25 1.33 4 92.30 3.68 1 1/4 71.75 1.42 5 103.90 4.25 1 1/2 76.05 1.49 6 124.65 6.80 2 81.75 2.03 8 145.70 8.20 2 1/2 82.90 2.25 10 POA 21.50 97 EXTENDED PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel and Epoxy coated - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 3/4 72.45 1.85 3 92.10 4.47 1 73.00 2.34 4 101.00 4.90 1 1/4 76.00 2.40 5 107.20 5.32 1 1/2 82.65 2.45 6 129.20 11.15 2 85.45 3.13 8 153.40 12.65 2 1/2 86.85 4.20 10 POA --
- 30 - Version 122009 110 Ordering: Specify pipe size, figure number and finish ADJUSTABLE CLEVIS HANGER LIGHTWEIGHT Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 1.90 2.30 100 0.12 2 2.40 3.15 100 0.26 1/2 1.90 2.30 100 0.12 2 1/2 4.45 5.95 50 0.58 3/4 1.95 2.30 100 0.12 3 5.09 6.60 25 0.66 1 2.00 2.35 100 0.12 3 1/2 6.20 7.85 25 0.82 1 1/4 2.05 2.70 100 0.18 4 6.45 8.55 25 0.94 1 1/2 2.25 2.95 100 0.24 110CT CLEVIS HANGER, COPPER TUBE SIZE Material: Copper plated carbon steel Ordering: Specify tube size and figure number Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/2 2.95 100 0.12 2 1/2 9.25 50 0.58 3/4 3.05 100 0.12 3 9.75 50 0.60 1 3.20 100 0.12 3 1/2 10.65 25 0.66 1 1/4 3.50 100 0.12 4 11.40 25 1.02 1 1/2 3.60 100 0.18 5 24.85 25 1.68 2 4.30 100 0.24 6 28.75 25 1.84 110CTI COPPER-GARD, COPPER TUBE CLEVIS HANGER Material: Epoxy coated over carbon steel - Imported Ordering: Specify tube size and figure number Note: COPPER GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/2 2.25 100 0.12 2 1/2 8.20 50 0.58 3/4 2.35 100 0.12 3 8.50 50 0.60 1 2.45 100 0.12 3 1/2 10.00 25 0.66 1 1/4 2.80 100 0.12 4 10.65 25 1.02 1 1/2 2.90 100 0.18 5 20.75 25 1.68 2 3.45 100 0.24 6 22.70 25 1.84
Version 122009-31 - 110GI Material: Electro-galvanized carbon steel - Imported Ordering: Specify pipe size and figure number ADJUSTABLE CLEVIS HANGER LIGHTWEIGHT Pipe Price Each Std. Wgt./ Pipe Price Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/2 2.00 100 0.12 2 2.60 100 0.26 3/4 2.05 100 0.12 2 1/2 4.80 50 0.58 1 2.20 100 0.12 3 5.50 25 0.66 1 1/4 2.40 100 0.18 3 1/2 6.55 25 0.82 1 1/2 2.50 100 0.24 4 7.20 25 0.94 110PC CLEVIS HANGER, PLASTIC COATED Material: Plastic coated carbon steel Ordering: Specify pipe size and figure number Note: Bottom of clevis hanger is plastic coated and top of hanger, nut and bolt are electro-galvanized Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 3/8 9.85 100 0.12 3 1/2 21.15 25 0.82 1/2 10.00 100 0.12 4 21.30 25 0.94 3/4 10.05 100 0.12 5 40.05 25 2.04 1 10.50 100 0.12 6 61.60 10 2.80 1 1/4 11.10 100 0.18 7 96.80 10 3.24 1 1/2 12.10 100 0.24 8 92.40 10 4.46 2 12.35 100 0.26 10 144.75 Bulk 8.06 2 1/2 17.05 50 0.58 12 186.45 Bulk 10.34 3 18.35 50 0.66 114 TURNBUCKLE ADJUSTER Material: Malleable iron Ordering: Specify rod size, figure number and finish Rod Price/Each Std. Wgt./ Size Plain Pkg. Each 3/8 8.50 100 0.516 1/2 10.75 50 0.545
- 32 - Version 122009 126 Material: Electro-galvanized malleable iron Ordering: Specify pipe size and figure number ONE HOLE CLAMP Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/2 1.05 100 0.04 2 4.60 50 0.25 3/4 1.25 100 0.05 2 1/2 8.30 50 0.49 1 1.60 100 0.09 3 12.15 25 0.82 1 1/4 2.15 100 0.12 4 24.60 10 1.30 1 1/2 2.55 100 0.16 127CT NATICK HANGER, COPPER TUBE SIZE, COPPER-GARD Material: Epoxy coated over carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/2 x 6 2.15 25 0.075 1/2 x 12 2.60 25 0.130 3/4 x 6 2.20 25 0.075 3/4 x 12 2.70 25 0.130 1 x 6 2.25 25 0.090 1 x 12 2.80 25 0.140 1 1/4 x 6 2.55 25 0.095 1 1/4 x 12 3.10 25 0.150 1 1/2 x 6 2.65 25 0.110 1 1/2 x 12 3.20 25 0.160 2 x 6 2.85 25 0.125 2 x 12 3.40 25 0.170 127CTP NATICK HANGER, COPPER TUBE SIZE, COPPER PLATED Material: Copper plated carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: Copper plating as stated in MSS SP58 section 6.3 is for identification purposes only, not corrosion protection. Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/2 x 6 2.15 25 0.075 1/2 x 12 2.60 25 0.130 3/4 x 6 2.20 25 0.075 3/4 x 12 2.70 25 0.130 1 x 6 2.25 25 0.090 1 x 12 2.80 25 0.140 1 1/4 x 6 2.55 25 0.095 1 1/4 x 12 3.10 25 0.150 1 1/2 x 6 2.65 25 0.110 1 1/2 x 12 3.20 25 0.160 2 x 6 2.85 25 0.125 2 x 12 3.40 25 0.170
Version 122009-33 - 129CT COPPER-GARD VAN (BELL) HANGER, COPPER TUBE SIZE SWING GATE DESIGN Material: Epoxy coated over carbon steel Ordering: Specify tube size and figure number FULL CARTON QUANTITIES Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Coated Pkg. Each Size Coated Pkg. Each 1/2 1.95 25 0.070 1 1/4 2.75 25 0.080 3/4 2.05 25 0.075 1 1/2 3.40 25 0.100 1 2.15 25 0.075 2 5.50 25 0.115 129CTP VAN (BELL) HANGER, COPPER TUBE SIZE, COPPER PLATED SWING GATE DESIGN Material: Copper plated carbon steel Ordering: Specify tube size and figure number FULL CARTON QUANTITIES Note: Copper plating as stated in MSS SP58 section 6.3 is for identification purposes only, not corrosion protection. Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Plated Pkg. Each Size Plated Pkg. Each 1/2 1.95 25 0.070 1 1/4 2.75 25 0.080 3/4 2.05 25 0.075 1 1/2 3.40 25 0.100 1 2.15 25 0.075 2 5.50 25 0.115 129CTSB SOLID BRASS VAN (BELL) HANGER, COPPER TUBE SIZE, SWING GATE DESIGN (set screw NOT included) Material: Solid brass Ordering: Specify tube size and figure number Note: Solid brass offers superior corrosion prtection. Tubing Price Std. Weight Size Each Pkg. Each 1/2 8.60 100 0.070 3/4 8.95 100 0.075 1 9.30 100 0.080
- 34 - Version 122009 131CT COPPER-GARD MILFORD HANGER, COPPER TUBE SIZE Material: Epoxy coated over carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Coated Pkg. Each Size Coated Pkg. Each 1/2 x 6 2.15 25 0.085 1/2 x 12 3.10 25 0.130 3/4 x 6 2.25 25 0.090 3/4 x 12 3.20 25 0.130 1 x 6 2.35 25 0.090 1 x 12 3.30 25 0.135 1 1/4 x 6 3.65 25 0.095 1 1/4 x 12 4.60 25 0.140 1 1/2 x 6 3.80 25 0.100 1 1/2 x 12 5.10 25 0.145 2 x 6 4.05 25 0.125 2 x 12 5.55 25 0.175 131CTP MILFORD HANGER, COPPER TUBE SIZE COPPER PLATED Material: Copper plated carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: Copper plating as stated in MSS SP58 section 6.3 is for identification purposes only, not corrosion protection. Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Plated Pkg. Each Size Plated Pkg. Each 1/2 x 6 2.15 25 0.085 1/2 x 12 3.10 25 0.130 3/4 x 6 2.25 25 0.090 3/4 x 12 3.20 25 0.130 1 x 6 2.35 25 0.090 1 x 12 3.30 25 0.135 1 1/4 x 6 3.65 25 0.095 1 1/4 x 12 4.60 25 0.140 1 1/2 x 6 3.80 25 0.100 1 1/2 x 12 5.10 25 0.145 2 x 6 4.05 25 0.125 2 x 12 5.55 25 0.175 136 RIGHT ANGLE CLAMP Material: Hot-dip galvanized steel Ordering: Specify pipe size and figure number Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/2 8.75 50 0.40 2 17.85 50 0.89 3/4 8.90 50 0.42 2 1/2 19.40 25 1.10 1 11.40 50 0.48 3 20.85 25 1.14 1 1/4 11.80 50 0.55 3 1/2 26.00 25 1.30 1 1/2 13.05 50 0.57 4 27.55 25 1.40
Version 122009-35 - 137 STANDARD U-BOLT with 4 HEX NUTS EACH Ordering: Specify pipe size, figure number.and finish Note: Sizes 1/2-1 can be supplied with 3/8 rod size for heavy duty use, specify #137HD U-Bolts with longer tangents or longer threads as well as plastic coated U-Bolts are also available - Priced on application Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price Each Std. Wgt./ Size Size Plain E G Pkg. Each Size Size Plain E G Pkg. Each 1/2 1/4 2.45 3.10 100 0.10 5 1/2 8.55 11.30 25 1.00 3/4 1/4 2.50 3.15 100 0.10 6 5/8 16.50 19.95 25 1.98 1 1/4 2.75 3.25 100 0.10 8 5/8 19.05 22.90 10 2.26 1 1/4 3/8 3.15 3.85 100 0.26 10 3/4 35.10 39.65 10 3.94 1 1/2 3/8 3.50 4.00 100 0.28 12 7/8 57.20 62.50 10 6.40 2 3/8 3.75 4.25 100 0.32 14 7/8 63.80 81.95 Bulk 8.30 2 1/2 1/2 6.80 7.20 50 0.70 16 7/8 75.60 102.20 Bulk 9.20 3 1/2 7.20 8.35 50 0.76 18 1 113.70 151.00 Bulk 13.50 3 1/2 1/2 7.60 8.95 50 0.80 20 1 139.60 186.00 Bulk 14.60 4 1/2 7.90 9.10 50 0.86 24 1 141.00 215.00 Bulk 16.90 137SS Type 304 137SX Type 316 STANDARD U-BOLT, STAINLESS STEEL with 4 HEX NUTS EACH Material: Stainless steel Ordering: Specify pipe size and figure number and stainless steel type Pipe Rod Price Each Wgt./ Pipe Rod Price Each Wgt./ Size Size T-304 T-316 Each Size Size T-304 T-316 Each 1/2 1/4 12.00 POA 0.10 3 1/2 40.05 POA 0.76 3/4 1/4 12.25 POA 0.10 4 1/2 43.35 POA 0.86 1 1/4 12.50 POA 0.10 5 1/2 75.70 POA 1.00 1 1/4 3/8 18.70 POA 0.26 6 5/8 91.05 POA 1.98 1 1/2 3/8 19.60 POA 0.28 8 5/8 117.10 POA 2.26 2 3/8 21.80 POA 0.32 10 3/4 191.65 POA 3.94 2 1/2 1/2 39.80 POA 0.70 12 7/8 306.25 POA 6.40
- 36-145 STRAIGHT J-HOOK Version 122009 Ordering: Specify pipe size, figure number and finish Note: Priced on application Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 3/4 POA 25 0.59 2 1/2 POA 25 1.23 1 POA 25 0.82 3 POA 25 1.39 1 1/4 POA 25 0.84 4 POA 25 1.58 1 1/2 POA 25 1.09 5 POA 10 2.18 2 POA 25 1.15 6 POA 10 2.45 146 OFFSET J-HOOK Ordering: Specify pipe size, figure number and finish Note: Priced on application Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 3/4 POA 25 0.59 2 1/2 POA 25 1.23 1 POA 25 0.82 3 POA 25 1.39 1 1/4 POA 25 0.84 4 POA 25 1.58 1 1/2 POA 25 1.09 5 POA 10 2.40 2 POA 25 1.15 6 POA 10 2.80 150 BEAM CLAMP Ordering: Specify clamp size, beam thickness, flange width, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Clamp Size Price/Each FLANGE WIDTH 4 5 6 7 8 Wgt./Each Wgt./Each Wgt./Each Wgt./Each Wgt./Each 1.91 1.1 1.2 1.4 1.5 POA 2 3.2 3.9 4.2 4.7 4.9
Version 122009-37 - 152 RETURN LINE ANGLE Ordering: Specify size number and figure number Size Price/Each Wgt./ Plain E G Each 1 10.05 12.25 0.425 2 10.30 12.55 0.585 3 16.35 19.20 0.870 4 17.05 20.95 1.175 5 17.90 22.50 0.825 6 19.80 25.35 1.650 153 SIDE BEAM CONNECTOR Material: Malleable iron Ordering: Specify size number and figure number FULL CARTON QUANTITY ON 3/8 Rod Price/Each Std. Wgt./ Size Plain Galv. Pkg. Each 3/8 1.85 3.35 100 0.13 1/2 4.20 5.85 100 0.25 155 STEEL BEAM CLAMP Ordering: Specify clamp size, beam thickness, flange width, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Clamp Size Rod Size Price/Each FLANGE WIDTH 4 5 6 7 8 Wgt./Each Wgt./Each Wgt./Each Wgt./Each Wgt./Each 1 3/8 POA 1.7 1.8 1.8 1.9 2.0 2 1/2 POA 2.0 2.1 2.2 2.3 2.4 3 5/8 POA 3.3 3.5 3.6 3.8 3.9 4 3/4 POA 4.3 4.5 4.8 5.0 5.2 5 7/8 POA 5.9 6.2 6.5 6.8 7.1
- 38 - Version 122009 156 SIDE BEAM CLAMP Ordering: Specify clamp size, flange width and thickness, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Size Rod Price/ Size Rod Price/ No. Size Each No. Size Each 1 3/8 Priced 4 3/4 Priced 2 1/2 on 5 7/8 on 3 5/8 Application Application 157 EXTENSION PIECE Material: Malleable iron Ordering: Specify rod size, figure number and finish Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 3/8 4.40 5.95 0.19 3/4 13.50 19.90 0.68 1/2 7.05 9.45 0.41 7/8 17.80 26.60 0.78 5/8 8.90 12.05 0.42 158 TOP BEAM HOOK Ordering: Specify hook size, flange width and thickness, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Rod Std. Rod Std. Size Size Price/Each Pkg. Size Size Price/Each Pkg. 1 3/8 Priced Bulk 4 3/4 Priced Bulk 2 1/2 on Bulk 5 7/8 on Bulk 3 5/8 Application Bulk Application
Version 122009-39 - 159 ADJUSTABLE ROD BEAM CLAMP Ordering: Specify rod size, figure number and finish Price / Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 18.55 24.10 Bulk 0.98 1/2 24.50 31.85 Bulk 1.38 5/8 30.35 39.50 Bulk 1.86 167 PIPE COVERING PROTECTION SHIELD Material: Pre-galvanized carbon steel Ordering: Specify shield size and figure number Note: Available in stainless steel - Priced on application Size Shield ID Price/Each Wgt./ Size Shield ID Price/Each Wgt./ E G Each E G Each 0 1 7/8 8.50 0.25 17 14 56.25 4.45 1 2 3/8 8.75 0.31 18 15 63.00 4.46 2 2 7/8 9.80 0.37 19 16 80.85 4.90 3 3 1/2 12.70 0.90 20 17 88.05 5.15 4 4 14.15 0.95 21 18 115.90 5.50 5 4 1/2 15.20 1.10 22 19 128.40 5.70 6 5 17.65 1.25 23 20 132.15 6.35 7 5 5/8 18.70 1.40 24 21 141.35 6.45 8 6 5/8 21.30 1.65 25 22 153.15 6.60 9 7 5/8 24.05 1.90 26 23 158.40 7.00 10 8 5/8 28.35 2.10 27 24 164.45 7.85 13 9 5/8 33.10 2.35 28 26 171.20 7.90 14 10 3/4 35.75 2.65 29 27 182.50 8.05 15 11 3/4 40.35 2.95 30 28 194.40 8.60 16 12 3/4 43.45 3.15
- 40-167MSS MSS PIPE COVERING PROTECTION SHIELD Version 122009 Material: Pre-galvanized carbon steel Ordering: Specify shield size and figure number Note: Available in stainless steel - Priced on application Size Shield ID Price/Each Wgt./ Size Shield ID Price/Each Wgt./ E G Each E G Each X1A 1 7/8 11.00 0.53 14C 12 3/4 134.85 10.90 1A 2 3/8 11.25 0.68 15C 14 144.40 12.00 2A 2 7/8 11.75 0.82 16C 15 150.70 12.90 3A 3 1/2 12.45 1.02 17C 16 164.20 13.70 4A 4 14.20 1.13 18C 17 172.40 14.60 5A 4 1.2 15.20 1.26 19C 18 249.20 21.30 6A 5 17.65 1.42 20C 19 281.50 22.50 7A 5 5/8 18.70 1.58 21C 20 315.10 23.70 8A 6 5/8 26.60 2.33 22C 21 327.50 24.90 9A 7 5/8 30.50 2.66 23C 22 344.90 26.10 10A 8 5/8 34.85 3.00 24C 23 367.20 27.30 9B 7 5/8 46.00 3.90 25C 24 387.40 28.50 10B 8 5/8 48.90 4.50 26C 26 412.40 30.80 11B 9 5/8 58.25 5.03 27C 27 425.40 32.10 12B 10 3/4 65.50 5.62 28C 28 436.90 33.20 13C 11 3/4 124.50 10.12 180 SHORT CLIP Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Pkg. Each Size Pkg. Each 1/2 11.50 100 0.165 2 17.80 50 0.49 3/4 11.60 100 0.190 2 1/2 48.80 25 0.91 1 11.70 100 0.235 3 50.75 25 0.95 1 1/4 13.00 100 0.260 3 1/2 44.30 25 1.05 1 1/2 14.75 100 0.400 4 50.00 25 1.16
Version 122009-41 - 189 DOUBLE BOLT PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel, heavy duty and alloy. Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 1/2 23.50 30.30 0.540 5 105.95 157.25 8.130 3/4 23.60 30.55 0.570 6 140.25 226.70 13.110 1 23.75 30.75 0.605 8 158.80 262.35 14.670 1 1/4 26.15 32.50 0.675 10 221.95 376.10 21.670 1 1/2 28.70 35.10 1.715 12 261.70 414.75 23.830 2 29.70 36.10 1.925 14 442.85 800.80 37.500 2 1/2 33.00 39.55 2.115 16 538.90 862.40 41.000 3 33.55 40.25 2.260 18 598.05 974.45 46.460 3 1/2 53.20 79.45 2.365 20 782.60 1242.90 60.000 4 90.15 136.45 7.500 24 1089.80 1662.40 70.430 200 BATH TUB WEDGE Material: Malleable iron Ordering: Specify figure number Price/ Std. Wgt./ Each Pkg. Each 9.50 Bulk 0.77 202 SIDE BEAM BRACKET Ordering: Specify pipe size, figure number and finish FULL CARTON QUANTITIES ONLY Rod Price/Each Std. Wgt./ Size Plain Pkg. Each 3/8 4.00 100 0.27 1/2 7.05 50 0.48
- 42 - Version 122009 212 STANDARD STEEL PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 1/2 8.75 9.95 0.27 5 24.15 35.40 2.20 3/4 8.80 10.10 0.30 6 58.60 77.80 5.42 1 8.90 10.20 0.33 8 71.25 102.45 6.51 1 1/4 8.95 11.10 0.36 10 122.80 202.45 13.60 1 1/2 9.45 12.35 0.37 12 137.30 223.00 16.05 2 9.70 15.55 1.04 14 195.35 289.70 20.00 2 1/2 10.50 17.25 1.19 16 210.20 355.75 22.00 3 11.65 18.30 1.27 18 374.70 575.30 32.00 3 1/2 16.75 24.75 1.43 20 464.95 717.60 36.00 4 16.75 24.90 1.94 24 624.80 898.95 54.00 216 HEAVY TWO BOLT PIPE CLAMP Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 3 POA 2.07 12 POA 40.95 4 POA 5.93 14 POA 55.50 5 POA 6.56 16 POA 59.40 6 POA 12.40 18 POA 130.00 8 POA 14.06 20 POA 164.00 10 POA 24.07 24 POA 215.00 218 Material: Malleable iron Ordering: Specify figure number MALLEABLE IRON CENTER LOAD BEAM CLAMP Flange Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3-7 34.30 47.90 20 2.49
Version 122009-43 - 229 Material: Malleable iron Ordering: Specify rod size, figure number and finish MALLEABLE BEAM CLAMP with EXTENSION PIECE Rod Price/ Wgt./ Rod Price/ Wgt./ Size Each Each Size Each Each 3/8 39.30 2.42 3/4 52.20 2.87 1/2 43.10 2.63 7/8 60.20 3.01 5/8 46.20 2.67 231 Material: Pre-galvanized carbon steel Ordering: Specify pipe size and figure number FULL CARTON QUANTITIES ONLY TWO HOLE PIPE STRAP Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/4 0.33 100 0.010 1 1/2 1.10 100 0.130 3/8 0.35 100 0.030 2 1.55 100 0.180 1/2 0.37 100 0.025 2 1/2 2.60 50 0.260 3/4 0.44 100 0.070 3 3.30 50 0.320 1 0.70 100 0.090 4 4.35 50 0.400 1 1/4 0.86 100 0.100 6 16.25 25 0.750 231CT COPPER-GARD TWO HOLE COPPER TUBING STRAP, with nails Material: Epoxy over carbon steel Ordering: Specify tube size and figure number FULL CARTON QUANTITIES ONLY Tube Price/Each Std. Wgt./ Tube Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/4 0.32 100 0.010 1 0.50 100 0.040 3/8 0.34 100 0.010 1 1/4 0.62 100 0.045 1/2 0.38 100 0.010 1 1/2 1.25 100 0.050 3/4 0.43 100 0.020 2 1.46 100 0.060
- 44 - Version 122009 231SS TWO HOLE PIPE STRAP, STAINLESS STEEL TYPE 304 Material: Stainless steel Ordering: Specify pipe size or O.D. tube size and figure number Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size T-304 Pkg. Each Size T-304 Pkg. Each 1/4 7.20 100 0.030 1 1/2 10.95 100 0.115 3/8 7.20 100 0.035 2 11.60 100 0.135 1/2 7.25 100 0.030 2 1/2 13.75 25 0.165 3/4 7.40 100 0.050 3 16.00 25 0.190 1 7.50 100 0.060 4 22.00 25 0.405 1 1/4 9.60 100 0.105 6 POA BULK 1.15 233 ONE HOLE PIPE STRAP Material: Electro-galvanized carbon steel Ordering: Specify pipe size and figure number Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/4 0.80 100 0.02 1 3.20 100 0.06 3/8 1.00 100 0.04 1 1/4 4.00 100 0.17 1/2 1.20 100 0.05 1 1/2 5.25 100 0.18 3/4 1.75 100 0.06 2 7.00 50 0.36 233SS Type 304 Material: Stainless steel Ordering: Specify pipe size or O.D. tube size and figure number ONE HOLE PIPE STRAP, STAINLESS STEEL TYPE 304 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size T-304 Pkg. Each Size T-304 Pkg. Each 1/4 5.75 100 0.020 1 7.10 100 0.065 3/8 5.75 100 0.020 1 1/4 11.20 100 0.145 1/2 5.90 100 0.040 1 1/2 12.55 100 0.170 3/4 6.10 100 0.050 2 13.70 100 0.195
Version 122009 235 WIRE PIPE HOOK Ordering: Specify pipe size, length, and figure number FULL CARTON QUANTITIES ONLY Note: For pipe size PC coated hooks, please specify #235PC - 45 - Size Price/Each Std. Price/Each Std. Wgt./ Size Price/Each Std. Price/Each Std. Wgt./ Plain Pkg. PC Pkg. Each Plain Pkg. PC Pkg. Each 1/2 x 4 0.63 50 -- -- 0.05 1 1/4 x 6 1.14 50 4.25 50 0.06 1/2 x 6 0.70 50 2.33 50 0.06 1 1/4 x 8 1.37 50 -- -- 0.08 1/2 x 8 0.84 50 -- -- 0.08 1 1/4 x 10 1.55 50 -- -- 0.10 1/2 x 10 1.55 50 -- -- 0.10 1 1/4 x 12 1.74 50 -- -- 0.12 1/2 x 12 1.74 50 -- -- 0.12 3/4 x 4 0.63 50 -- -- 0.05 1 1/2 x 6 1.14 50 -- -- 0.06 3/4 x 6 0.70 50 2.33 50 0.06 1 1/2 x 8 1.37 50 -- -- 0.08 3/4 x 8 0.84 50 -- -- 0.08 1 1/2 x 10 1.55 50 -- -- 0.10 3/4 x 10 1.55 50 -- -- 0.11 1 1/2 x 12 1.74 50 -- -- 0.12 3/4 x 12 1.74 50 -- -- 0.12 1 x 4 0.63 50 -- -- 0.05 2 x 6 1.14 50 -- -- 0.06 1 x 6 0.70 50 3.36 50 0.06 2 x 8 1.37 50 -- -- 0.08 1 x 8 0.84 50 -- -- 0.08 2 x 10 1.55 50 -- -- 0.10 1 x 10 1.55 50 -- -- 0.10 2 x 12 1.74 50 -- -- 0.12 1 x 12 1.74 50 -- -- 0.12 235CT WIRE TUBING HOOK, COPPER Material: Copper plated carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: For tube size PC coated hooks, please specify #235CP Size Price/Each Std. Price/Each Std. Wgt./ Size Price/Each Std. Price/Each Std. Wgt./ Plated Pkg. PC Pkg. Each Plated Pkg. PC Pkg. Each 1/2 x 4 0.72 50 -- -- 0.05 1 1/4 x 6 1.07 50 -- 50 0.06 1/2 x 6 0.82 50 1.90 50 0.06 1 1/4 x 8 1.23 50 -- -- 0.08 1/2 x 8 1.02 50 -- -- 0.08 1 1/4 x 10 1.91 50 -- -- 0.10 1/2 x 10 1.91 50 -- -- 0.10 1 1/4 x 12 2.15 50 -- -- 0.12 1/2 x 12 2.15 50 -- -- 0.12 3/4 x 4 0.72 50 -- -- 0.05 1 1/2 x 6 1.33 50 -- 50 0.06 3/4 x 6 0.82 50 1.95 50 0.06 1 1/2 x 8 1.43 50 -- -- 0.08 3/4 x 8 1.02 50 -- -- 0.08 1 1/2 x 10 1.91 50 -- -- 0.10 3/4 x 10 1.91 50 -- -- 0.10 1 1/2 x 12 2.15 50 -- -- 0.12 3/4 x 12 2.15 50 -- -- 0.12 1 x 4 0.72 50 -- -- 0.05 2 x 6 1.33 50 -- 50 0.06 1 x 6 0.82 50 -- -- 0.06 2 x 8 1.45 50 -- -- 0.08 1 x 8 1.02 50 -- -- 0.08 2 x 10 1.91 50 -- -- 0.10 1 x 10 1.91 50 -- -- 0.10 2 x 12 2.15 50 -- -- 0.12 1 x 12 2.15 50 -- -- 0.12
- 46 - Version 122009 236 237 EXTENSION STRAP for #237 DWV HANGER Material: Pre-galvanized carbon steel Ordering: Specify pipe size, figure number and finish FULL CARTON QUANTITIES ONLY Price/Each Std. Wgt./ Size Pre-Galv Pkg. Each 3/4" (W) X 24" (L) 7.30 25/Tube 0.225 DWV (DRAIN, WASTE, VENT) HANGER Material: Pre-galvanized carbon steel Ordering: Specify pipe size, figure number and finish - FULL CARTON QUANTITIES ONLY Note: For pipe size PC coated hangers, please specify #237PC PRE-GALV Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Pre-Galv PC Pkg. Each Size Pre-Galv PC Pkg. Each 1 1/2 2.60 4.70 50 0.20 3 3.15 5.45 50 0.24 2 2.85 5.05 50 0.22 4 4.35 6.30 50 0.26 237CT COPPER DWV (DRAIN, WASTE, VENT) HANGER Material: Pre-copper plated carbon steel Ordering: Specify tube size and figure number Note: Supports Schedule 40 plastic DWV FULL CARTON QUANTITIES ONLY 239 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1 1/2 x 12 5.10 50 0.25 3 x 12 5.65 50 0.32 2 x 12 5.40 50 0.27 4 x 12 6.55 50 0.40 PERFORATED HANGER STRAPPING Material: Black and pre-galvanized carbon steel Ordering: Specify size, gauge, length figure number and finish Size Price/ Wgt./ Size Price/ Wgt./ Each Each Each Each 3/4 x 24ga x 10' Coils Plain 4.25 0.50 3/4 x 24ga x 100' Coils Plain 46.60 5.00 3/4 x 20ga x 10' Coils Plain 5.40 0.80 3/4 x 20ga x 100' Coils Plain 57.00 8.00 3/4 x 24ga x 10' Coils E G 4.80 0.50 3/4 x 24ga x 100' Coils E G 47.25 5.10 3/4 x 20ga x 10' Coils E G 5.60 0.85 3/4 x 20ga x 100' Coils E G 60.50 8.25 3/4 x 24ga x 50' Coils Plain 23.50 2.50 3/4 x 20ga x 50' Coils Plain 28.60 4.00 3/4 x 24ga x 50' Coils E G 25.10 2.50 3/4 x 20ga x 50' Coils E G 31.50 4.00
Version 122009 239AH Material: Pre-galvanized carbon steel Ordering: Specify length and figure number PERFORATED HANGER STRAPPING with ALTERNATING HOLE - 47 - Size Price/Each E G Wgt./ Each 3/4 x 22ga x 10' Coils E G 5.25 0.60 3/4 x 22ga x 50' Coils E G 29.80 3.00 3/4 x 22ga x 100' Coils E G 57.15 6.00 239CT COPPER PERFORATED HANGER STRAPPING Material: Pre-copper plated carbon steel Ordering: Specify size, gauge, length figure number and finish Size Price/Each Copperized Wgt./ Each 239SS 3/4 x 22ga x 10' Coils 10.10 0.60 3/4 x 22ga x 50' Coils 53.95 3.00 3/4 x 22ga x 100' Coils 105.20 6.00 Material: Stainless steel Ordering: Specify coil length and figure number PERFORATED HANGER STRAPPING, STAINLESS STEEL TYPE 304 Size Price/Each Wgt./ T-304 Each 3/4 x 22ga x 10' Coils 48.30 0.7 3/4 x 22ga x 50' Coils 241.50 3.5 240 STUD GUARD, TRIANGLE POINT Ordering: Specify size and figure number FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Pkg. per 100 16 ga x 3 x 1 1/2 0.56 100 8.00 16 ga x 5 x 1 1/2 0.86 100 14.00 16 ga x 6 x 1 1/2 1.00 100 16.00 18 ga x 3 x 1 1/2 0.48 100 5.68 18 ga x 5 x 1 1/2 0.71 100 10.52 18 ga x 6 x 1 1/2 0.84 100 13.08
- 48-241 Material: Ordering: Carbon steel Specify size and figure number FULL CARTON QUANTITIES ONLY Size NAIL PLATE - NON FHA Price/Each Std. Wgt. Pkg. per 100 18ga x 3 x 1 1/2 0.49 250 6.00 18ga x 6 x 1 1/2 0.85 100 12.00 Version 122009 242G 242GSN BOCA SAFETY PLATE Ordering: Specify figure number, 242G (regular) or 242GSN (self nailing) FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Pkg. per 100 16 ga x 5 x 8 (242G) 4.14 50 70 16 ga x 5 x 8 (242GSN) 4.48 25 70 243G FHA NAIL PLATE Ordering: Specify size, guage and figure number FULL CARTON QUANTITIES ONLY Size Price/Each Std. Pkg. Wgt. / Each 18 ga X 1 1/2 X 9 1.46 50 0.180 18 ga 1 1/2 X 12 1.69 50 0.250 18 ga X 1 1/2 X 18 2.87 50 0.380 18 ga X 1 1/2 X 24 3.49 50 0.500 18 ga X 3 X 9 2.67 50 0.380 18 ga X 3 X 12 3.62 50 0.520 18 ga X 3 X 18 5.35 50 0.780 16 ga X 1 1/2 X 9 1.80 50 0.240 16 ga X 1 1/2 X 12 2.47 50 0.320 16 ga X 1 1/2 X 18 3.67 50 0.480 16 ga X 1 1/2 X 24 5.38 50 0.640 13 ga X 1 1/2 X 9 3.45 50 0.350 13 ga X 1 1/2 X 12 4.96 25 0.470 13 ga X 1 1/2 X 18 7.24 25 0.700 13 ga X 1 1/2 X 24 9.44 25 0.980
Version 122009 245G STUD GUARD, TWIST POINT - 49 - Ordering: Specify size and figure number. FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Pkg. per 100 19 ga x 3 x 1 1/2 0.59 100 6.00 19 ga x 6 x 1 1/2 0.89 100 11.00 255 PIPE ALIGNMENT GUIDE (SINGLE SPIDER CLAMP) Ordering: Specify pipe or tube size and insulation thickness to determine guide size Size Price/Each Wgt./ Wgt./ Size Price/Each Each Each 2 349.30 10.00 9 1338.40 52.00 3 373.75 11.00 10 POA 59.00 4 485.15 13.00 11 POA 78.00 5 586.85 17.00 12 POA -- 6 734.70 24.00 13 POA -- 7 924.00 31.00 14 POA -- 8 1103.20 34.00 256 PIPE ALIGNMENT GUIDE (DOUBLE SPIDER CLAMP) Ordering: Specify pipe or tube size and insulation thickness to determine guide size Size Price/ Wgt./ Size Price/ Wgt./ Each Each Each Each 2 417.30 13 9 1685.60 69 3 451.90 15 10 1971.20 88 4 604.20 26 11 2520.00 132 5 712.30 35 12 2710.00 144 6 962.05 48 13 3169.60 153 7 1146.40 59 14 3920.00 172 8 1400.00 66
- 50 - Version 122009 272 273 275 ADJUSTABLE ROLLER HANGER with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 2 28.75 33.85 1.14 8 94.20 128.25 11.83 2 1/2 30.80 37.50 1.47 10 120.75 162.85 17.29 3 31.50 39.70 1.62 12 192.60 340.90 22.50 3 1/2 41.80 55.00 2.76 14 368.35 538.95 33.00 4 38.50 50.80 3.16 16 502.30 731.30 46.00 5 54.25 69.15 4.62 18 613.20 923.40 50.50 6 60.55 82.80 6.08 20 829.50 1249.90 65.00 7 80.30 127.55 7.59 24 POA POA 125.00 ADJUSTABLE TWO-ROD ROLLER SUPPORT with cast iron roll Ordering: Specify roller size, figure number and finish Note: If pre-drilling holes, contact factory for required dimensions Pipe Price/ Wgt./ Pipe Price/ Wgt./ Size Each Each Size Each Each 2 47.90 1.450 10 164.70 13.950 2 1/2 53.30 2.535 12 193.40 17.930 3 55.60 2.735 14 307.60 27.545 3 1/2 58.85 2.850 16 374.20 33.340 4 66.05 4.320 18 407.05 30.000 5 77.50 4.780 20 588.60 46.600 6 89.75 7.705 24 933.00 81.220 7 130.80 10.60 30 1712.00 109.220 8 137.70 12.205 with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel ROLLER CHAIR Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 2 28.40 33.30 0.94 8 96.05 133.50 8.16 2 1/2 29.00 35.40 1.18 10 132.80 177.10 11.96 3 33.00 40.00 1.32 12 172.40 245.60 15.86 3 1/2 49.05 59.00 2.58 14 240.80 450.00 21.58 4 45.50 57.00 2.94 16 371.80 730.00 34.50 5 57.35 77.45 3.64 18 481.60 POA 36.50 6 68.75 94.00 5.72 20 607.00 POA 45.00 7 96.05 127.15 6.98 24 1344.00 POA 77.50
Version 122009 277 ADJUSTABLE TWO-ROD ROLLER HANGER with cast iron roll and sockets Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel If pre-drilling holes, contact factory for required dimensions - 51 - Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 2 24.40 30.75 0.760 10 93.95 132.60 9.170 2 1/2 28.70 37.70 1.185 12 133.45 182.40 13.150 3 29.90 39.90 1.385 14 184.15 283.60 18.475 3 1/2 33.15 43.15 1.500 16 236.60 369.00 24.540 4 32.10 48.60 2.110 18 282.25 441.70 27.200 5 39.15 55.70 2.570 20 397.85 603.60 32.000 6 48.35 72.65 4.395 24 628.30 989.20 54.000 7 68.00 84.75 5.160 30 1165.00 1675.00 82.000 8 73.90 111.00 7.425 279S PIPE ROLL STAND, CARBON STEEL CHAIR with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2-3 1/2 109.00 6 16-20 482.95 34 4-6 143.50 8 22-24 645.60 44 8-10 247.15 15 30 POA 84 12-14 355.15 24 36-42 POA 130 280S with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel ADJUSTABLE PIPE ROLL STAND, CARBON STEEL FRAME Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2-3 1/2 287.40 11.00 16-20 1082.90 63.84 4-6 321.95 13.10 22-24 1300.00 79.00 8-10 483.95 29.00 30 POA 125.28 12-14 713.50 40.00 36-42 POA 156.00
- 52 - Version 122009 310CT Material: Pre-copper plated carbon steel Ordering: Specify tube size and figure number COPPER TUBING EMLOK ADJUSTABLE SWIVEL RING HANGER Tubing Rod Price/Each Std. Wgt./ Tubing Rod Price/Each Std. Wgt./ Size Size Plated Pkg. Each Size Size Plated Pkg. Each 1/2 3/8 2.05 100 0.070 2 1/2 1/2 6.30 50 0.310 3/4 3/8 2.10 100 0.070 3 1/2 7.20 50 0.345 1 3/8 2.15 100 0.070 3 1/2 1/2 10.70 50 0.375 1 1/4 3/8 2.20 100 0.080 4 1/2 9.45 25 0.410 1 1/2 3/8 2.25 100 0.085 5 1/2 17.25 25 0.475 2 3/8 2.35 100 0.100 6 1/2 21.40 25 0.530 310CTI 310G COPPER-GARD, COPPER TUBING EMLOK ADJUSTABLE SWIVEL RING HANGER Material: Epoxy coated over carbon steel - Imported Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Tubing Rod Price/Each Std. Wgt./ Tubing Rod Price/Each Std. Wgt./ Size Size Coated Pkg. Each Size Size Coated Pkg. Each 1/2 3/8 2.00 100 0.070 2 1/2 1/2 5.80 50 0.310 3/4 3/8 2.05 100 0.070 3 1/2 6.80 50 0.345 1 3/8 2.10 100 0.070 3 1/2 1/2 8.20 50 0.375 1 1/4 3/8 2.15 100 0.080 4 1/2 9.35 25 0.410 1 1/2 3/8 2.20 100 0.080 5 1/2 17.10 25 0.475 2 3/8 2.30 100 0.100 6 1/2 20.85 25 0.530 EMLOK ADJUSTABLE SWIVEL RING HANGER Material: G-90 Pre-galvanized carbon steel Ordering: Specify pipe size and figure number Note: Rod sizes conform to industry standards for rod load ratings UL approved on sizes 3/4-8 FM approved on sizes 3/4-8 APPROVALS: Underwriters Laboratories listed and Factory Mutual approved, complies with Federal Specification A-A- 1192A (Type 10), and Manufacturers Standardization Society SP-69 (Type 10) Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size Pre-Galv. Pkg. Each Size Size Pre-Galv. Pkg. Each 1/2 3/8 1.20 100 0.08 3 1/2 8.05 50 0.35 3/4 3/8 1.20 100 0.08 3 1/2 1/2 12.15 50 0.39 1 3/8 1.20 100 0.08 4 5/8 13.95 25 0.43 1 1/4 3/8 1.25 100 0.10 5 5/8 15.35 25 0.65 1 1/2 3/8 1.30 100 0.10 6 3/4 28.75 20 1.09 2 3/8 1.45 100 0.12 8 3/4 34.90 10 1.24 2 1/2 1/2 7.30 50 0.32
Version 122009 310NFPA - 53 - EMLOK ADJUSTABLE SWIVEL RING HANGER NFPA Material: G-90 Pre-galvanized carbon steel Ordering: Specify pipe size and figure number Note: UL approved on sizes 3/4-8 FM approved on sizes 3/4-8 APPROVALS: Underwriters Laboratories listed and Factory Mutual approved, complies with Federal- Specification A-A-1192A (Type 10), Manufacturers Standardization Society SP-69 (Type 10), and NFPA standards for reduced sizes Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size Pre-Galv. Pkg. Each Size Size Pre-Galv. Pkg. Each 1/2 3/8 1.20 100 0.080 3 3/8 2.80 50 0.280 3/4 3/8 1.20 100 0.080 3 1/2 3/8 2.95 50 0.320 1 3/8 1.20 100 0.080 4 3/8 3.35 25 0.320 1 1/4 3/8 1.25 100 0.100 5 1/2 7.05 25 0.620 1 1/2 3/8 1.30 100 0.100 6 1/2 7.25 20 0.650 2 3/8 1.45 100 0.120 8 1/2 9.60 10 1.000 2 1/2 3/8 2.65 50 0.240 10 1/2 50.00 10 1.675 310NFPC 310PC EMLOK ADJUSTABLE SWIVEL RING HANGER (NFPA-REDUCED ROD SIZE) PLASTIC COATED Material: Pre-galvanized carbon steel, plastic coated. Ordering: Specify pipe size and figure number Note: Sizes 2-1/2-8 are available in larger rod sizes (see part# 310PC) Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size Coated Pkg. Each Size Size Coated Pkg. Each 1/2 3/8 9.50 100 0.090 3 3/8 15.20 50 0.350 3/4 3/8 9.60 100 0.090 3 1/2 3/8 24.50 50 0.380 1 3/8 9.80 100 0.090 4 3/8 29.00 25 0.410 1 1/4 3/8 10.15 100 0.110 5 1/2 36.30 25 0.650 1 1/2 3/8 10.85 100 0.110 6 1/2 46.85 20 1.010 2 3/8 11.90 100 0.113 8 1/2 50.90 10 1.200 2 1/2 3/8 13.10 50 0.320 EMLOK ADJUSTABLE SWIVEL RING HANGER PLASTIC COATED Material: Pre-galvanized carbon steel plastic coated Ordering: Specify pipe size and figure number Note: Sizes 2-1/2-8 also available in NFPA reduced rod sizes at the same list price Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size P.C. Pkg. Each Size Size P.C. Pkg. Each 1/2 3/8 9.50 100 0.090 3 1/2 17.25 50 0.370 3/4 3/8 9.60 100 0.090 3 1/2 1/2 27.81 50 0.410 1 3/8 9.80 100 0.090 4 5/8 32.95 25 0.450 1 1/4 3/8 10.15 100 0.110 5 5/8 41.15 25 0.690 1 1/2 3/8 10.85 100 0.110 6 3/4 53.25 20 1.130 2 3/8 11.90 100 0.113 8 3/4 57.80 10 1.300 2 1/2 1/2 14.75 50 0.350
- 54-320 TURNBUCKLE Material: Forged steel Ordering: Specify rod size, figure number and finish Note: Also available in stainless steel - Priced on application Version 122009 Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 3/8 POA POA 0.42 1 POA POA 2.60 1/2 POA POA 0.65 1 1/8 POA POA 4.20 5/8 POA POA 0.98 1 1/4 POA POA 4.50 3/4 POA POA 1.50 1 1/2 POA POA 6.40 7/8 POA POA 1.90 320 I 420 421 TURNBUCKLE Material: Forged steel - Imported Ordering: Specify rod size, figure number and finish Note: Hot dip galvanized turnbuckles are not tapped oversized Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain HDG Each Size Plain HDG Each 3/8 19.85 31.50 0.42 1 78.10 114.15 2.60 1/2 24.15 39.85 0.65 1 1/8 121.20 181.75 4.20 5/8 29.40 44.40 0.98 1 1/4 125.50 188.75 4.50 3/4 40.10 60.00 1.50 1 1/2 187.05 448.20 6.40 7/8 52.90 89.15 1.90 PIPE SADDLE SUPPORT saddle with round bar stock connection Ordering: Specify pipe size, figure number and finish Note: Larger sizes available - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 106.95 1.51 6 165.35 4.90 3 129.60 1.85 8 172.10 5.75 4 138.50 2.70 10 180.15 9.88 5 157.75 3.14 12 201.00 11.40 ADJUSTABLE PIPE SADDLE SUPPORT with COUPLING saddle with threaded coupling connection Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 137.90 1.35 6 245.70 7.03 3 163.10 2.45 8 284.60 8.53 4 169.95 3.63 10 345.75 13.04 5 212.15 4.30 12 362.70 15.07
Version 122009-55 - 422 ADJUSTABLE PIPE SUPPORT saddle with threaded rod connection Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 112.50 1.92 6 183.10 5.92 3 127.70 2.20 8 213.00 6.71 4 143.40 3.23 10 236.10 11.56 5 157.60 3.67 12 248.30 13.08 425 PIPE SADDLE SUPPORT with U-BOLT saddle with male pipe connection Ordering: Specify pipe size, figure number and finish Note: Extension pipe and baseplate must be ordered separately Center line of pipe to floor dimension needed to quote complete unit Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 1/2 178.00 2.51 10 442.80 25.70 3 179.50 3.16 12 480.80 31.20 3 1/2 180.10 3.17 14 829.30 50.00 4 204.80 10.75 16 894.20 57.00 5 227.60 12.10 18 1084.73 64.00 6 268.60 12.70 20 1494.70 113.50 8 350.80 21.30 24 1841.60 137.00 426 ADJUSTABLE PIPE SADDLE SUPPORT saddle and nipple with cast iron reducer Ordering: Specify pipe size, figure number and finish Note: Extension pipe and baseplate must be ordered separately Center line of pipe to floor dimension needed to quote complete unit Also available in stainless steel Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 1/2 360.55 4.80 10 587.35 17.75 3 364.80 5.00 12 606.50 21.60 4 429.20 7.60 14 790.50 38.00 5 449.70 9.25 16 900.75 42.00 6 459.00 10.25 18 1224.85 51.00 8 501.75 12.80 20 1536.35 85.00
- 56-427 ADJUSTABLE PIPE SADDLE SUPPORT with U-BOLT Version 122009 saddle and nipple with cast iron reducer Ordering: Specify pipe size, figure number and finish Note: Extension pipe and baseplate must be ordered separately Center line of pipe to floor dimension needed to quote complete unit 428KT Material: Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 1/2 404.10 4.80 12 837.80 21.60 3 422.50 5.00 14 1146.50 38.00 3 1/2 500.00 5.20 16 1307.70 42.00 4 580.96 7.60 18 1902.50 51.00 5 588.60 9.25 20 2218.10 85.00 6 617.00 10.25 24 2763.40 110.00 8 707.40 12.80 30 3203.70 150.00 10 757.50 17.75 36 4260.00 229.00 ADJUSTABLE PIPE SADDLE SUPPORT KIT Ductile iron saddle with carbon steel coupling, carbon nipple and base plate, cast steel reducing coupling, stainless steel screws. (All above are hot-dip galvanized except for stainless steel set screws) Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40 extension pipe to be cut in field. Also available in 316 stainless steel. See part# 428KTSX * Use 3 kit for all smaller diameter pipes. Pipe Price/Each Wgt./ Size HDG Each 3* POA 11.45 4 POA 11.55 6 POA 13.05 8 POA 13.90 10 POA 15.15 12 POA 16.05 Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system) 428KTSX 316 STAINLESS ADJUSTABLE PIPE SADDLE SUPPORT, KIT Material: 316 stainless steel: saddle with welded coupling, nipple, reducing coupling, set screws and base plate. Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40 extension pipe to be cut in field. * Use 3 kit for all smaller diameter pipes. Pipe Price/Each Wgt./ Size HDG Each 3* POA 11.45 4 POA 11.55 6 POA 13.05 8 POA 13.90 10 POA 15.15 12 POA 16.05 Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system)
Version 122009-57 - 429KTU ADJUSTABLE PIPE SADDLE SUPPORT, with U-BOLT KIT Material: Ductile iron saddle with carbon steel coupling, carbon nipple and base plate, carbon steel U-bolt and nuts, cast steel reducing coupling, stainless steel screws. (All above are hot-dip galvanized except for stainless steel set screws) Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40 extension pipe to be cut in field. Also available in 316 stainless steel. See part# 429KTUSX Pipe Size Price/Each HDG Wgt./ Each 3 POA 12.25 4 POA 12.45 6 POA 15.00 8 POA 16.20 10 POA 19.10 12 POA 22.45 Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system) 429KTUSX Material: 316 STAINLESS ADJUSTABLE PIPE SADDLE SUPPORT, with U-BOLT, KIT 316 stainless steel: saddle with welded coupling, U-bolt and nuts, nipple, reducing coupling, set screws and base plate. Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40, stainless steel extension pipe to be cut in field. Pipe Price/Each Wgt./ Size 316 Stainless Each 3 POA 12.25 4 POA 12.45 6 POA 15.00 8 POA 16.20 10 POA 19.10 12 POA 22.45 Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system) 450 HEAVY BEAM CLAMP ASSEMBLY Material: Clamps are carbon steel, eyenut is forged steel Ordering: Specify clamp size, rod size, figure number and finish Also specify with or without eyenut Size Price/Each Wgt./ Price/Each Wgt./ Size Less Eyenut With Eyenut Each Less Eyenut With Eyenut Each 1 399.90 444.50 8 4 711.55 886.80 16 2 533.35 588.50 12 5 857.95 1065.60 30 3 577.75 669.25 11 6 1071.20 1288.55 48
- 58-575 Ordering: Specify figure number CORPORATION EYE BOLT Version 122009 Bolt Price/ Wgt./ Size Each Each 3/4 8.50 1.00 595 FOUR BOLT SOCKET CLAMP Ordering: Specify pipe size, figure number and finish Pipe Rod Price/ Wgt./ Pipe Rod Price/ Wgt./ Size Size Each Each Size Size Each Each 4 3/4 POA 9.38 14 1 POA 46.78 6 3/4 POA 11.50 16 1 1/8 POA 70.53 8 3/4 POA 20.54 18 1 1/4 POA 84.65 10 3/4 POA 23.15 20 1 3/8 POA 98.65 12 3/4 POA 35.85 24 1 1/2 POA 135.50 599 SOCKET CLAMP WASHER Material: 3/4 size is malleable iron, 1-1 1/2 sizes are carbon steel Ordering: Specify rod size and figure number 600 Pipe Rod Price/ Wgt./ Pipe Rod Price/ Wgt./ Size Size Each Each Size Size Each Each 4-12 3/4 8.15 0.80 18 1 1/4 POA 3.14 14 1 POA 2.16 20 1 3/8 POA 3.08 16 1 1/8 POA 2.13 24 1 1/2 POA 3.02 Ordering: Specify pipe size, figure number and finish Note: Washers must be ordered separately SOCKET CLAMP Cast Iron Rod Price/Each Wgt./ Cast Iron Rod Price/Each Wgt./ Pipe Size Size Plain Each Pipe Size Size Plain Each 3 3/4 65.70 5.95 14 1 466.75 45.00 4 3/4 85.65 8.00 16 1 1/8 611.10 63.00 6 3/4 92.45 10.00 18 1 1/4 728.45 76.00 8 3/4 102.65 12.10 20 1 3/8 1347.00 100.50 10 3/4 113.95 13.63 24 1 1/2 2384.50 118.00 12 3/4 137.15 15.65
Version 122009-59 - 801 MEDIUM WELDED BRACKET Ordering: Specify size, figure number and finish Size Price/Each Plain Wgt./ Each 1 410.65 16.10 2 490.70 26.00 3 716.90 45.00 802 HEAVY WELDED BRACKET Ordering: Specify size figure number and finish Size Price/Each Wgt./ Price/Each Wgt./ Size Plain Each Plain Each 1 554.30 25.00 4 1152.50 82.10 2 706.60 38.00 5 1998.75 130.00 3 979.20 69.00 6 2173.45 155.00 820 LIGHT WELDED STEEL BRACKET Ordering: Specify size figure number and finish Size Price/Each Plain Wgt./ Each 1 139.15 4.20 2 144.25 6.50 3 178.40 9.40 820C CLIP FOR 820 BRACKET Ordering: Specify size figure number and finish Size Price/ Wgt./ Each Each 1 14.95 0.80 2 18.00 1.24
- 60-900 NAILING SLEEVE Version 122009 Material: Pre-galvanized carbon steel Ordering: Specify diameter, height, with or without covers and tabs, and figure number Priced on application 909 FORGED STEEL CLEVIS Material: Forged steel Ordering: Specify size, rod size, figure number and finish Note: Also available in larger sizes and stainless steel - Priced on application 909 I Body Maximum Tap Price/Each Wgt./ Size Size Plain E G Each 2 3/8, 1/2, 5/8 POA POA 1.00-1.10 2 1/2 3/4, 7/8 POA POA 2.30-2.50 3 1, 1 1/8, 1 1/4 POA POA 5.10-5.60 3 1/2 1 1/2 POA POA 8.10 FORGED STEEL CLEVIS Material: Forged steel - Imported Ordering: Specify size, rod size, figure number and finish Note: Hot dip galvanized forged clevis are not tapped oversized 910 Body Maximum Tap Price/Each Wgt./ Size Size Plain HDG Each 2 3/8, 1/2, 5/8 66.65 78.15 1.00-1.10 2 1/2 3/4, 7/8 103.50 134.95 2.30-2.50 3 1, 1 1/8, 1 1/4 171.35 201.75 5.10-5.60 3 1/2 1 1/2 388.70 485.15 8.10 PIPE SLEEVE with WELDED LUGS Material: Steel pipe Ordering: Specify pipe size, length, figure number and finish - Priced on application 915 WATERPROOF SLEEVE Material: Steel pipe Ordering: Specify pipe size, length, figure number and finish Specify if waterstop is needed - Priced on application
Version 122009 1900-1905 PIPE COVERING PROTECTION SADDLE - 61 - Ordering: Specify pipe size, figure number and finish Note: Alloy and stainless steel also available - Priced on application 1 Thick Covering #1900 Pipe Price/Ea. Wgt./ Size Plain Each 1/2 24.90 0.93 3/4 24.90 1.00 1 24.90 0.93 1 1/4 24.90 1.32 1 1/2 26.10 1.32 2 26.10 1.34 2 1/2 26.10 1.34 3 30.25 1.48 3 1/2 34.30 1.48 4 34.30 1.58 5 34.30 2.62 6 48.75 3.82 8 63.05 4.60 10 63.05 4.60 12 104.65 6.90 2 1/2 Thick Covering #1903 Pipe Price/Ea. Wgt./ Size Plain Each 1 1/4 42.50 3.00 1 1/2 42.50 3.01 2 42.50 3.18 2 1/2 45.15 3.20 3 45.15 3.01 3 1/2 48.50 3.43 4 48.50 3.43 5 48.50 6.85 6 79.80 6.85 8 89.30 7.21 10 104.70 8.91 12 140.75 9.69 14 140.75 9.69 16 176.50 14.62 18 192.25 16.89 20 192.25 16.79 24 224.50 18.75 1 1/2 Thick Covering #1901 Pipe Price/Ea. Wgt./ Size Plain Each 3/4 29.50 1.74 1 29.50 1.74 1 1/4 29.50 1.82 1 1/2 29.50 1.82 2 29.50 1.98 2 1/2 35.45 1.98 3 35.45 2.08 3 1/2 35.45 2.08 4 35.45 2.14 5 35.45 3.30 6 63.40 4.28 8 76.60 5.82 10 76.60 6.66 12 116.80 7.61 14 116.80 7.67 16 134.55 8.35 18 147.60 8.92 20 171.90 13.76 24 209.80 16.05 3 Thick Covering #1904 Pipe Price/Ea. Wgt./ Size Plain Each 2 46.90 3.97 2 1/2 46.90 3.98 3 56.60 4.49 3 1/2 56.60 4.49 4 56.60 4.49 5 56.60 4.49 6 99.10 7.69 8 99.10 9.14 10 107.55 11.00 12 150.95 11.38 14 150.95 11.82 16 181.70 18.17 18 181.70 18.20 20 209.00 18.40 24 243.75 19.72 2 Thick Covering #1902 Pipe Price/Ea. Wgt./ Size Plain Each 3/4 32.60 2.60 1 32.60 2.60 1 1/4 32.60 2.60 1 1/2 36.45 2.75 2 36.45 2.80 2 1/2 36.45 2.80 3 40.55 2.90 3 1/2 40.55 2.90 4 40.55 2.95 5 40.55 3.45 6 65.10 5.40 8 75.60 6.41 10 86.20 8.57 12 125.95 8.73 14 125.95 9.43 16 147.80 10.00 18 147.80 13.19 20 181.95 14.98 24 204.35 17.62 4 Thick Covering #1905 Pipe Price/Ea. Wgt./ Size Plain Each 4 79.40 6.09 5 79.40 6.09 6 125.80 10.24 8 125.80 10.24 10 138.90 14.10 12 182.15 14.20 14 182.15 18.48 16 230.50 21.80 18 232.00 21.95 20 301.30 22.83 24 325.50 23.14
- 62 - Version 122009 4000 PIPE SLIDE ASSEMBLY tee with teflon slide plate Ordering: Specify type number, pipe size, travel, figure number and finish Type No. Price/Each (Up to 8 Pipe Size) Travel (in.) Type Price/Each (10 to 24 Pipe Size) Travel (in.) 5 10 15 20 No. 5 20 15 20 1 1 2 2 3 3 4 Price on Application 4 5 5 6 6 7 7 Price on Application
Version 122009-63 - STRUT AND STRUT ACCESSORIES
- 64 - Version 122009 7000 7001 STRUT, 1 5/8 X 1 5/8 X 12 GAUGE Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE Fig. Type List Price Per Ft. Wt. Per Ft. (lbs) No. Pre-Galv Green Pre-Galv Green 7000 Solid 8.60 8.60 1.90 1.90 7001 Slotted 8.60 8.60 1.85 1.85 7000A 7001A STRUT, 1 5/8 X 1 5/8 X 12 GAUGE BACK-TO-BACK Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes are available 10 LENGTHS - 30 PCS. PER BUNDLE 20 LENGTHS - 30 PCS. PER BUNDLE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Green Pre-Galv Green 7000A Solid 27.40 28.95 3.80 3.80 7001A Slotted 27.40 28.95 3.70 3.70 7000SS - 7000SX 7001SS - 7001SX STAINLESS STEEL STRUT, 1 5/8 X 1 5/8 X 12 GAUGE Ordering: Specify figure number and stainless steel type Note: Standard lengths:10 and 20 Other lengths available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. 304 (SS) 316 (SX) 304 (SS) 316 (SX) 7000 (304,316) Solid POA POA 1.90 1.90 7001 (304, 316) Slotted 58.00 POA 1.85 1.85
Version 122009-65 - 7100 7101 Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STRUT, 1 5/8 X 1 5/8 X 14 GAUGE Fig. Type List Price Per Ft. Wt. Per Ft. (lbs) No. Pre-Galv Green Pre-Galv Green 7100 Solid 6.25 6.25 1.40 1.40 7101 Slotted 6.25 6.25 1.36 1.36 7100SS - 7100SX 7101SS - 7101SX Ordering: Specify figure number and stainless steel type Note: Standard lengths:10 and 20 Other lengths available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STAINLESS STEEL STRUT, 1 5/8 X 1 5/8 X 14 GAUGE Fig. Type List Price Per Ft. Wt. Per Ft. (lbs) No. 304 (SS) 316 (SX) 304 (SS) 316 (SX) 7100 (304, 316) Solid POA POA 1.40 1.40 7101 (304, 316) Slotted 49.00 POA 1.36 1.36 7200 7201 Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STRUT, 1 5/8 X 13/16 X 14 GAUGE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Green Pre-Galv Green 7200 Solid 5.50 5.50 0.97 0.97 7201 Slotted 5.50 5.50 0.87 0.87
- 66 - Version 122009 7200SS - 7200SX 7201SS - 7201SX Ordering: Specify figure number Note: Standard lengths:10 and 20 Other lengths available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STAINLESS STEEL STRUT, 1 5/8 X 13/16 X 14 GAUGE Fig. Type List Price Per Ft. List Price Per Ft. No. 304 (SS) 316 (SX) Wt. Per Ft. (lbs) 7200 Solid 35.00 POA 0.97 7201 Slotted 35.00 POA 0.87 7225 Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes are available 10 LENGTHS - 25 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE CONTINUOUS CONCRETE INSERT, 1 3/8 X 1 5/8 X 12 GAUGE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Plain Pre-Galv Plain 7225 Standard 27.00 POA 1.88 1.88 7230 7231 Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes are available 10 LENGTHS - 25 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STRUT, 2 7/16 X 1 5/8 X 12 GAUGE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Green Pre-Galv Green 7230 Solid 19.70 23.95 2.54 2.54 7231 Slotted 19.70 23.92 2.52 2.52